void __init arch_init_irq(void)
{
/* hardware initialization */
nile4_irq_setup();
m1543_irq_setup();
/* controller setup */
init_i8259_irqs();
vrc5476_irq_init(VRC5476_IRQ_BASE);
mips_cpu_irq_init(CPU_IRQ_BASE);
/* setup cascade interrupts */
setup_irq(VRC5476_IRQ_BASE + VRC5476_I8259_CASCADE, &irq_cascade);
setup_irq(CPU_IRQ_BASE + CPU_VRC5476_CASCADE, &irq_cascade);
/* setup error interrupts for debugging */
setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_CPCE, &irq_error);
setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_CNTD, &irq_error);
setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_MCE, &irq_error);
setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_LBRT, &irq_error);
setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_PCIS, &irq_error);
setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_PCI, &irq_error);
/* setup the grandpa intr vector */
set_except_vector(0, ddb5476_handle_int);
}
void __init arch_init_irq(void)
{
mips_hpt_frequency = QEMU_C0_COUNTER_CLOCK; /* 100MHz */
init_i8259_irqs();
set_c0_status(0x8400);
}
void i8259_init(void)
{
init_i8259_irqs();
outb(0x00, 0x4d0);
outb(0x02, 0x4d1); /* USB IRQ9 is level */
}
/*
* On systems with i8259-style interrupt controllers we assume for
* driver compatibility reasons interrupts 0 - 15 to be the i8295
* interrupts even if the hardware uses a different interrupt numbering.
*/
void __init arch_init_irq(void)
{
init_i8259_irqs(); /* Integrated i8259 */
switch (sni_brd_type) {
case SNI_BRD_10:
case SNI_BRD_10NEW:
case SNI_BRD_TOWER_OASIC:
case SNI_BRD_MINITOWER:
sni_a20r_irq_init();
break;
case SNI_BRD_PCI_TOWER:
sni_pcit_irq_init();
break;
case SNI_BRD_PCI_TOWER_CPLUS:
sni_pcit_cplus_irq_init();
break;
case SNI_BRD_RM200:
sni_rm200_irq_init();
break;
case SNI_BRD_PCI_MTOWER:
case SNI_BRD_PCI_DESKTOP:
case SNI_BRD_PCI_MTOWER_CPLUS:
sni_pcimt_irq_init();
break;
}
}
void rs780e_init_irq(void)
{
/* Route the HT interrupt to Core0 INT1 */
INT_router_regs_HT1_int0 = 0x20 | (1 << phy_core_id[0]);
INT_router_regs_HT1_int1 = 0x20 | (1 << phy_core_id[0]);
INT_router_regs_HT1_int2 = 0x20 | (1 << phy_core_id[0]);
INT_router_regs_HT1_int3 = 0x20 | (1 << phy_core_id[0]);
INT_router_regs_HT1_int4 = 0x20 | (1 << phy_core_id[0]);
INT_router_regs_HT1_int5 = 0x20 | (1 << phy_core_id[0]);
INT_router_regs_HT1_int6 = 0x20 | (1 << phy_core_id[0]);
INT_router_regs_HT1_int7 = 0x20 | (1 << phy_core_id[0]);
/* Enable the all HT interrupt */
HT_irq_enable_reg0 = 0x0000ffff;
HT_irq_enable_reg1 = 0x00000000;
HT_irq_enable_reg2 = 0x00000000;
HT_irq_enable_reg3 = 0x00000000;
HT_irq_enable_reg4 = 0x00000000;
HT_irq_enable_reg5 = 0x00000000;
HT_irq_enable_reg6 = 0x00000000;
HT_irq_enable_reg7 = 0x00000000;
/* Enable the IO interrupt controller */
IO_control_regs_Intenset = IO_control_regs_Inten | (0xffff << 16);
prom_printf("the new IO inten is %x\n", IO_control_regs_Inten);
/* Sets the first-level interrupt dispatcher. */
mips_cpu_irq_init();
#ifdef CONFIG_I8259
init_i8259_irqs();
#endif
set_c0_status(STATUSF_IP6);
mach_ip3 = dispatch_ht_irq;
}
void __init arch_init_irq(void)
{
mips_cpu_irq_init();
gt641xx_irq_init();
init_i8259_irqs();
setup_irq(GT641XX_CASCADE_IRQ, &cascade);
setup_irq(I8259_CASCADE_IRQ, &cascade);
}
void __init arch_init_irq(void)
{
/* by default, we disable all interrupts and route all vrc5477
* interrupts to pin 0 (irq 2) */
ddb_out32(DDB_INTCTRL0, 0);
ddb_out32(DDB_INTCTRL1, 0);
ddb_out32(DDB_INTCTRL2, 0);
ddb_out32(DDB_INTCTRL3, 0);
clear_c0_status(0xff00);
set_c0_status(0x0400);
/* setup PCI interrupt attributes */
set_pci_int_attr(PCI0, INTA, ACTIVE_LOW, LEVEL_SENSE);
set_pci_int_attr(PCI0, INTB, ACTIVE_LOW, LEVEL_SENSE);
if (mips_machtype == MACH_NEC_ROCKHOPPERII)
set_pci_int_attr(PCI0, INTC, ACTIVE_HIGH, LEVEL_SENSE);
else
set_pci_int_attr(PCI0, INTC, ACTIVE_LOW, LEVEL_SENSE);
set_pci_int_attr(PCI0, INTD, ACTIVE_LOW, LEVEL_SENSE);
set_pci_int_attr(PCI0, INTE, ACTIVE_LOW, LEVEL_SENSE);
set_pci_int_attr(PCI1, INTA, ACTIVE_LOW, LEVEL_SENSE);
set_pci_int_attr(PCI1, INTB, ACTIVE_LOW, LEVEL_SENSE);
set_pci_int_attr(PCI1, INTC, ACTIVE_LOW, LEVEL_SENSE);
set_pci_int_attr(PCI1, INTD, ACTIVE_LOW, LEVEL_SENSE);
set_pci_int_attr(PCI1, INTE, ACTIVE_LOW, LEVEL_SENSE);
/*
* for debugging purpose, we enable several error interrupts
* and route them to pin 1. (IP3)
*/
/* cpu parity check - 0 */
ll_vrc5477_irq_route(0, 1); ll_vrc5477_irq_enable(0);
/* cpu no-target decode - 1 */
ll_vrc5477_irq_route(1, 1); ll_vrc5477_irq_enable(1);
/* local bus read time-out - 7 */
ll_vrc5477_irq_route(7, 1); ll_vrc5477_irq_enable(7);
/* PCI SERR# - 14 */
ll_vrc5477_irq_route(14, 1); ll_vrc5477_irq_enable(14);
/* PCI internal error - 15 */
ll_vrc5477_irq_route(15, 1); ll_vrc5477_irq_enable(15);
/* IOPCI SERR# - 30 */
ll_vrc5477_irq_route(30, 1); ll_vrc5477_irq_enable(30);
/* IOPCI internal error - 31 */
ll_vrc5477_irq_route(31, 1); ll_vrc5477_irq_enable(31);
/* init all controllers */
init_i8259_irqs();
mips_cpu_irq_init();
vrc5477_irq_init(VRC5477_IRQ_BASE);
/* setup cascade interrupts */
setup_irq(VRC5477_IRQ_BASE + VRC5477_I8259_CASCADE, &irq_cascade);
setup_irq(CPU_IRQ_BASE + CPU_VRC5477_CASCADE, &irq_cascade);
}
void __init init_IRQ(void)
{
set_except_vector(0, cobalt_handle_int);
init_i8259_irqs(); /* 0 ... 15 */
mips_cpu_irq_init(16); /* 16 ... 23 */
/*
* Mask all cpu interrupts
* (except IE4, we already masked those at VIA level)
*/
change_c0_status(ST0_IM, IE_IRQ4);
}
/*
* On systems with i8259-style interrupt controllers we assume for
* driver compatibility reasons interrupts 0 - 15 to be the i8295
* interrupts even if the hardware uses a different interrupt numbering.
*/
void __init arch_init_irq(void)
{
int i;
init_i8259_irqs(); /* Integrated i8259 */
init_pciasic();
/* Actually we've got more interrupts to handle ... */
for (i = PCIMT_IRQ_INT2; i <= PCIMT_IRQ_ETHERNET; i++)
set_irq_chip(i, &pciasic_irq_type);
change_c0_status(ST0_IM, IE_IRQ1|IE_IRQ2|IE_IRQ3|IE_IRQ4);
}
void __init init_IRQ(void)
{
set_except_vector(0, mipsIRQ);
init_generic_irq();
init_i8259_irqs();
#ifdef CONFIG_REMOTE_DEBUG
if (remote_debug) {
set_debug_traps();
breakpoint();
}
#endif
}
void __init arch_init_irq(void)
{
extern void tx4927_irq_init(void);
tx4927_irq_init();
toshiba_rbtx4927_irq_ioc_init();
#ifdef CONFIG_TOSHIBA_FPCIB0
if (tx4927_using_backplane)
init_i8259_irqs();
#endif
/* Onboard 10M Ether: High Active */
set_irq_type(RBTX4927_RTL_8019_IRQ, IRQF_TRIGGER_HIGH);
wbflush();
}
void __init mach_init_irq(void)
{
clear_c0_status(ST0_IM | ST0_BEV);
irq_router_init();
mips_cpu_irq_init();
init_i8259_irqs();
irq_set_chip_and_handler(LOONGSON_UART_IRQ,
&loongson_irq_chip, handle_level_irq);
/* setup HT1 irq */
setup_irq(LOONGSON_HT1_IRQ, &cascade_irqaction);
set_c0_status(STATUSF_IP2 | STATUSF_IP6);
}
void __init arch_init_irq(void)
{
init_i8259_irqs();
if (!cpu_has_veic)
mips_cpu_irq_init();
switch(mips_revision_sconid) {
case MIPS_REVISION_SCON_SOCIT:
case MIPS_REVISION_SCON_ROCIT:
if (cpu_has_veic)
init_msc_irqs (MIPS_MSC01_IC_REG_BASE, MSC01E_INT_BASE, msc_eicirqmap, msc_nr_eicirqs);
else
init_msc_irqs (MIPS_MSC01_IC_REG_BASE, MSC01C_INT_BASE, msc_irqmap, msc_nr_irqs);
break;
case MIPS_REVISION_SCON_SOCITSC:
case MIPS_REVISION_SCON_SOCITSCP:
if (cpu_has_veic)
init_msc_irqs (MIPS_SOCITSC_IC_REG_BASE, MSC01E_INT_BASE, msc_eicirqmap, msc_nr_eicirqs);
else
init_msc_irqs (MIPS_SOCITSC_IC_REG_BASE, MSC01C_INT_BASE, msc_irqmap, msc_nr_irqs);
}
if (cpu_has_veic) {
set_vi_handler (MSC01E_INT_I8259A, malta_hw0_irqdispatch);
set_vi_handler (MSC01E_INT_COREHI, corehi_irqdispatch);
setup_irq (MSC01E_INT_BASE+MSC01E_INT_I8259A, &i8259irq);
setup_irq (MSC01E_INT_BASE+MSC01E_INT_COREHI, &corehi_irqaction);
}
else if (cpu_has_vint) {
set_vi_handler (MIPSCPU_INT_I8259A, malta_hw0_irqdispatch);
set_vi_handler (MIPSCPU_INT_COREHI, corehi_irqdispatch);
#ifdef CONFIG_MIPS_MT_SMTC
setup_irq_smtc (MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq,
(0x100 << MIPSCPU_INT_I8259A));
setup_irq_smtc (MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI,
&corehi_irqaction, (0x100 << MIPSCPU_INT_COREHI));
#else /* Not SMTC */
setup_irq (MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq);
setup_irq (MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI, &corehi_irqaction);
#endif /* CONFIG_MIPS_MT_SMTC */
}
else {
setup_irq (MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq);
setup_irq (MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI, &corehi_irqaction);
}
}
void __init ht_irq_init(void)
{
unsigned int t;
u32 i;
/*
* Clear all of the interrupts while we change the able around a bit.
* int-handler is not on bootstrap
*/
clear_c0_status(ST0_IM | ST0_BEV);
local_irq_disable();
/* Route the LPC interrupt to Core0 INT0 */
INT_router_regs_lpc_int = 0x11;
*(volatile unsigned int *)(0x900000003ff00000 + 0x1428) = (0x1<<10);//Enable lpc interrupts
/* Route the HT interrupt to Core0 INT1 */
INT_router_regs_HT1_int0 = 0x21;
INT_router_regs_HT1_int1 = 0x21;
INT_router_regs_HT1_int2 = 0x21;
INT_router_regs_HT1_int3 = 0x21;
INT_router_regs_HT1_int4 = 0x21;
INT_router_regs_HT1_int5 = 0x21;
INT_router_regs_HT1_int6 = 0x21;
INT_router_regs_HT1_int7 = 0x21;
HT_irq_enable_reg0 = 0xffffffff;
HT_irq_enable_reg1 = 0x00000000;
HT_irq_enable_reg2 = 0x00000000;
HT_irq_enable_reg3 = 0x00000000;
HT_irq_enable_reg4 = 0x00000000;
HT_irq_enable_reg5 = 0x00000000;
HT_irq_enable_reg6 = 0x00000000;
HT_irq_enable_reg7 = 0x00000000;
/* Enable the IO interrupt controller */
t = IO_control_regs_Intenset;
IO_control_regs_Intenset = t | (0xffff << 16);
IO_control_regs_Intenset = t | (0xffff << 16) | (0x1 << 10);
t = IO_control_regs_Intenset;
// for (i = I8259A_IRQ_BASE; i < I8259A_IRQ_BASE + 16; i++)
// irq_set_chip_and_handler(i, &irq_type, handle_level_irq);
// ke_spin_init(&ht_lock);
init_i8259_irqs();
}
void __init mach_init_irq(void)
{
LOONGSON_INTEDGE = LOONGSON_ICU_SYSTEMERR | LOONGSON_ICU_MASTERERR |
LOONGSON_ICU_RETRYERR | LOONGSON_ICU_MBOXES;
mips_cpu_irq_init();
init_i8259_irqs();
bonito_irq_init();
setup_irq(MIPS_CPU_IRQ_BASE + 2, &cascade_irqaction);
setup_irq(MIPS_CPU_IRQ_BASE + 5, &cascade_irqaction);
}
/*
* On systems with i8259-style interrupt controllers we assume for
* driver compatibility reasons interrupts 0 - 15 to be the i8295
* interrupts even if the hardware uses a different interrupt numbering.
*/
void __init arch_init_irq(void)
{
int i;
init_i8259_irqs(); /* Integrated i8259 */
init_pciasic();
/* Actually we've got more interrupts to handle ... */
for (i = PCIMT_IRQ_INT2; i <= PCIMT_IRQ_ETHERNET; i++) {
irq_desc[i].status = IRQ_DISABLED;
irq_desc[i].action = 0;
irq_desc[i].depth = 1;
irq_desc[i].handler = &pciasic_irq_type;
}
change_c0_status(ST0_IM, IE_IRQ1|IE_IRQ2|IE_IRQ3|IE_IRQ4);
}
void __init mach_init_irq(void)
{
/* init all controller
* 0-15 ------> i8259 interrupt
* 16-23 ------> mips cpu interrupt
* 32-63 ------> bonito irq
*/
/* Sets the first-level interrupt dispatcher. */
mips_cpu_irq_init();
init_i8259_irqs();
bonito_irq_init();
/* setup north bridge irq (bonito) */
setup_irq(LOONGSON_NORTH_BRIDGE_IRQ, &ip6_irqaction);
/* setup source bridge irq (i8259) */
setup_irq(LOONGSON_SOUTH_BRIDGE_IRQ, &cascade_irqaction);
}
void __init arch_init_irq(void)
{
init_i8259_irqs();
if (!cpu_has_veic)
mips_cpu_irq_init (MIPSCPU_INT_BASE);
switch(mips_revision_corid) {
case MIPS_REVISION_CORID_CORE_MSC:
case MIPS_REVISION_CORID_CORE_FPGA2:
case MIPS_REVISION_CORID_CORE_FPGA3:
case MIPS_REVISION_CORID_CORE_24K:
case MIPS_REVISION_CORID_CORE_EMUL_MSC:
if (cpu_has_veic)
init_msc_irqs (MSC01E_INT_BASE, msc_eicirqmap, msc_nr_eicirqs);
else
init_msc_irqs (MSC01C_INT_BASE, msc_irqmap, msc_nr_irqs);
}
if (cpu_has_veic) {
set_vi_handler (MSC01E_INT_I8259A, malta_hw0_irqdispatch);
set_vi_handler (MSC01E_INT_COREHI, corehi_irqdispatch);
setup_irq (MSC01E_INT_BASE+MSC01E_INT_I8259A, &i8259irq);
setup_irq (MSC01E_INT_BASE+MSC01E_INT_COREHI, &corehi_irqaction);
}
else if (cpu_has_vint) {
set_vi_handler (MIPSCPU_INT_I8259A, malta_hw0_irqdispatch);
set_vi_handler (MIPSCPU_INT_COREHI, corehi_irqdispatch);
#ifdef CONFIG_MIPS_MT_SMTC
setup_irq_smtc (MIPSCPU_INT_BASE+MIPSCPU_INT_I8259A, &i8259irq,
(0x100 << MIPSCPU_INT_I8259A));
setup_irq_smtc (MIPSCPU_INT_BASE+MIPSCPU_INT_COREHI,
&corehi_irqaction, (0x100 << MIPSCPU_INT_COREHI));
#else /* Not SMTC */
setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_I8259A, &i8259irq);
setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_COREHI, &corehi_irqaction);
#endif /* CONFIG_MIPS_MT_SMTC */
}
else {
setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_I8259A, &i8259irq);
setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_COREHI, &corehi_irqaction);
}
}
void __init arch_init_irq(void)
{
init_i8259_irqs();
if (!cpu_has_veic)
mips_cpu_irq_init();
if (mips_cm_present()) {
write_gcr_gic_base(GIC_BASE_ADDR | CM_GCR_GIC_BASE_GICEN_MSK);
gic_present = 1;
} else {
if (mips_revision_sconid == MIPS_REVISION_SCON_ROCIT) {
_msc01_biu_base = (unsigned long)
ioremap_nocache(MSC01_BIU_REG_BASE,
MSC01_BIU_ADDRSPACE_SZ);
gic_present = (REG(_msc01_biu_base, MSC01_SC_CFG) &
MSC01_SC_CFG_GICPRES_MSK) >>
MSC01_SC_CFG_GICPRES_SHF;
}
}
/*
* On systems with i8259-style interrupt controllers we assume for
* driver compatibility reasons interrupts 0 - 15 to be the i8259
* interrupts even if the hardware uses a different interrupt numbering.
*/
void __init arch_init_irq(void)
{
/*
* this is a hack to get back the still needed wired mapping
* killed by init_mm()
*/
/* Map 0xe0000000 -> 0x0:800005C0, 0xe0010000 -> 0x1:30000580 */
add_wired_entry(0x02000017, 0x03c00017, 0xe0000000, PM_64K);
/* Map 0xe2000000 -> 0x0:900005C0, 0xe3010000 -> 0x0:910005C0 */
add_wired_entry(0x02400017, 0x02440017, 0xe2000000, PM_16M);
/* Map 0xe4000000 -> 0x0:600005C0, 0xe4100000 -> 400005C0 */
add_wired_entry(0x01800017, 0x01000017, 0xe4000000, PM_4M);
init_i8259_irqs(); /* Integrated i8259 */
mips_cpu_irq_init();
init_r4030_ints();
change_c0_status(ST0_IM, IE_IRQ2 | IE_IRQ1);
}
/*
* On systems with i8259-style interrupt controllers we assume for
* driver compatibility reasons interrupts 0 - 15 to be the i8259
* interrupts even if the hardware uses a different interrupt numbering.
*/
void __init init_IRQ (void)
{
int i;
set_except_vector(0, jazz_handle_int);
init_generic_irq();
init_i8259_irqs(); /* Integrated i8259 */
#if 0
init_jazz_irq();
/* Actually we've got more interrupts to handle ... */
for (i = PCIMT_IRQ_INT2; i <= PCIMT_IRQ_ETHERNET; i++) {
irq_desc[i].status = IRQ_DISABLED;
irq_desc[i].action = 0;
irq_desc[i].depth = 1;
irq_desc[i].handler = &pciasic_irq_type;
}
#endif
}
void __init arch_init_irq(void)
{
init_i8259_irqs();
if (!cpu_has_veic)
mips_cpu_irq_init();
if (gcmp_present) {
GCMPGCB(GICBA) = GIC_BASE_ADDR | GCMP_GCB_GICBA_EN_MSK;
gic_present = 1;
} else {
if (mips_revision_sconid == MIPS_REVISION_SCON_ROCIT) {
_msc01_biu_base = (unsigned long)
ioremap_nocache(MSC01_BIU_REG_BASE,
MSC01_BIU_ADDRSPACE_SZ);
gic_present = (REG(_msc01_biu_base, MSC01_SC_CFG) &
MSC01_SC_CFG_GICPRES_MSK) >>
MSC01_SC_CFG_GICPRES_SHF;
}
}
void __init mach_init_irq(void)
{
/* init all controller
* 0-15 ------> i8259 interrupt
* 16-23 ------> mips cpu interrupt
* 32-63 ------> bonito irq
*/
/* most bonito irq should be level triggered */
LOONGSON_INTEDGE = LOONGSON_ICU_SYSTEMERR | LOONGSON_ICU_MASTERERR |
LOONGSON_ICU_RETRYERR | LOONGSON_ICU_MBOXES;
/* Sets the first-level interrupt dispatcher. */
mips_cpu_irq_init();
init_i8259_irqs();
bonito_irq_init();
/* bonito irq at IP2 */
setup_irq(MIPS_CPU_IRQ_BASE + 2, &cascade_irqaction);
/* 8259 irq at IP5 */
setup_irq(MIPS_CPU_IRQ_BASE + 5, &cascade_irqaction);
}
void __init init_irq_2f(void)
{
unsigned int mask;
/* init all controller
* 0-15 ------> i8259 interrupt
* 16-23 ------> mips cpu interrupt
* 32-63 ------> bonito irq
*/
/* setup cs5536 as high level trigger */
LOONGSON_INTPOL = LOONGSON_INT_BIT_INT0 | LOONGSON_INT_BIT_INT1;
LOONGSON_INTEDGE &= ~(LOONGSON_INT_BIT_INT0 | LOONGSON_INT_BIT_INT1);
/* Sets the first-level interrupt dispatcher. */
mips_cpu_irq_init();
init_i8259_irqs();
bonito_irq_init();
/* setup north bridge irq (bonito) */
setup_irq(LOONGSON_NORTH_BRIDGE_IRQ, &ip6_irqaction);
/* setup source bridge irq (i8259) */
setup_irq(LOONGSON_SOUTH_BRIDGE_IRQ, &cascade_irqaction);
}
void __init arch_init_irq(void)
{
set_except_vector(0, mipsIRQ);
init_i8259_irqs();
if (!cpu_has_veic)
mips_cpu_irq_init (MIPSCPU_INT_BASE);
switch(mips_revision_corid) {
case MIPS_REVISION_CORID_CORE_MSC:
case MIPS_REVISION_CORID_CORE_FPGA2:
case MIPS_REVISION_CORID_CORE_FPGA3:
case MIPS_REVISION_CORID_CORE_EMUL_MSC:
if (cpu_has_veic)
init_msc_irqs (MSC01E_INT_BASE, msc_eicirqmap, msc_nr_eicirqs);
else
init_msc_irqs (MSC01C_INT_BASE, msc_irqmap, msc_nr_irqs);
}
if (cpu_has_veic) {
set_vi_handler (MSC01E_INT_I8259A, malta_hw0_irqdispatch);
set_vi_handler (MSC01E_INT_COREHI, corehi_irqdispatch);
setup_irq (MSC01E_INT_BASE+MSC01E_INT_I8259A, &i8259irq);
setup_irq (MSC01E_INT_BASE+MSC01E_INT_COREHI, &corehi_irqaction);
}
else if (cpu_has_vint) {
set_vi_handler (MIPSCPU_INT_I8259A, malta_hw0_irqdispatch);
set_vi_handler (MIPSCPU_INT_COREHI, corehi_irqdispatch);
setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_I8259A, &i8259irq);
setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_COREHI, &corehi_irqaction);
}
else {
set_except_vector(0, mipsIRQ);
setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_I8259A, &i8259irq);
setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_COREHI, &corehi_irqaction);
}
}
void __init arch_init_irq(void)
{
/* setup cascade interrupts */
setup_irq(NILE4_IRQ_BASE + NILE4_INT_INTE, &irq_cascade);
setup_irq(CPU_IRQ_BASE + CPU_NILE4_CASCADE, &irq_cascade);
set_except_vector(0, ddbIRQ);
nile4_irq_setup(NILE4_IRQ_BASE);
m1543_irq_setup();
init_i8259_irqs();
printk("CPU_IRQ_BASE: %d\n",CPU_IRQ_BASE);
mips_cpu_irq_init(CPU_IRQ_BASE);
printk("enabling 8259 cascade\n");
ddb5074_led_hex(0);
/* Enable the interrupt cascade */
nile4_enable_irq(NILE4_IRQ_BASE+IRQ_I8259_CASCADE);
}
void __init arch_init_irq(void)
{
int gic_present, gcmp_present;
init_i8259_irqs();
if (!cpu_has_veic)
mips_cpu_irq_init();
gcmp_present = gcmp_probe(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ);
if (gcmp_present) {
GCMPGCB(GICBA) = GIC_BASE_ADDR | GCMP_GCB_GICBA_EN_MSK;
gic_present = 1;
} else {
_msc01_biu_base = (unsigned long) ioremap_nocache(MSC01_BIU_REG_BASE, MSC01_BIU_ADDRSPACE_SZ);
gic_present = (REG(_msc01_biu_base, MSC01_SC_CFG) &
MSC01_SC_CFG_GICPRES_MSK) >> MSC01_SC_CFG_GICPRES_SHF;
}
if (gic_present)
printk(KERN_DEBUG "GIC present\n");
switch (mips_revision_sconid) {
case MIPS_REVISION_SCON_SOCIT:
case MIPS_REVISION_SCON_ROCIT:
if (cpu_has_veic)
init_msc_irqs(MIPS_MSC01_IC_REG_BASE,
MSC01E_INT_BASE, msc_eicirqmap,
msc_nr_eicirqs);
else
init_msc_irqs(MIPS_MSC01_IC_REG_BASE,
MSC01C_INT_BASE, msc_irqmap,
msc_nr_irqs);
break;
case MIPS_REVISION_SCON_SOCITSC:
case MIPS_REVISION_SCON_SOCITSCP:
if (cpu_has_veic)
init_msc_irqs(MIPS_SOCITSC_IC_REG_BASE,
MSC01E_INT_BASE, msc_eicirqmap,
msc_nr_eicirqs);
else
init_msc_irqs(MIPS_SOCITSC_IC_REG_BASE,
MSC01C_INT_BASE, msc_irqmap,
msc_nr_irqs);
}
if (cpu_has_veic) {
set_vi_handler(MSC01E_INT_I8259A, malta_hw0_irqdispatch);
set_vi_handler(MSC01E_INT_COREHI, corehi_irqdispatch);
setup_irq(MSC01E_INT_BASE+MSC01E_INT_I8259A, &i8259irq);
setup_irq(MSC01E_INT_BASE+MSC01E_INT_COREHI, &corehi_irqaction);
} else if (cpu_has_vint) {
set_vi_handler(MIPSCPU_INT_I8259A, malta_hw0_irqdispatch);
set_vi_handler(MIPSCPU_INT_COREHI, corehi_irqdispatch);
#ifdef CONFIG_MIPS_MT_SMTC
setup_irq_smtc(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq,
(0x100 << MIPSCPU_INT_I8259A));
setup_irq_smtc(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI,
&corehi_irqaction, (0x100 << MIPSCPU_INT_COREHI));
/*
* Temporary hack to ensure that the subsidiary device
* interrupts coing in via the i8259A, but associated
* with low IRQ numbers, will restore the Status.IM
* value associated with the i8259A.
*/
{
int i;
for (i = 0; i < 16; i++)
irq_hwmask[i] = (0x100 << MIPSCPU_INT_I8259A);
}
#else /* Not SMTC */
setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq);
setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI,
&corehi_irqaction);
#endif /* CONFIG_MIPS_MT_SMTC */
} else {
setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq);
setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI,
&corehi_irqaction);
}
#if defined(CONFIG_MIPS_MT_SMP)
if (gic_present) {
/* FIXME */
int i;
struct {
unsigned int resched;
unsigned int call;
} ipiirq[] = {
{
.resched = GIC_IPI_EXT_INTR_RESCHED_VPE0,
.call = GIC_IPI_EXT_INTR_CALLFNC_VPE0},
{
.resched = GIC_IPI_EXT_INTR_RESCHED_VPE1,
.call = GIC_IPI_EXT_INTR_CALLFNC_VPE1
}, {
.resched = GIC_IPI_EXT_INTR_RESCHED_VPE2,
