C++ (Cpp) ll_timer_interrupt示例

示例#1

文件： time.c 项目： OpenHMR/Open-HMR600

void mips_timer_interrupt(struct pt_regs *regs)
{
	if ((timer_tick_count++ % HZ) == 0) {
		mips_display_message(&display_string[display_count++]);
		if (display_count == MAX_DISPLAY_COUNT)
		        display_count = 0;

	}

	ll_timer_interrupt(MIPS_CPU_TIMER_IRQ, regs);
}

示例#2

文件： time.c 项目： JacksonZhangkun/linux-2.6

void mips_timer_interrupt(struct pt_regs *regs)
{
#if !defined(CONFIG_MIPS_AVALANCHE_SOC)		
	if ((timer_tick_count++ % HZ) == 0) {
		mips_display_message(&display_string[display_count++]);
		if (display_count == MAX_DISPLAY_COUNT)
		        display_count = 0;

	}
#endif
	ll_timer_interrupt(MIPS_CPU_TIMER_IRQ, regs);
}

示例#3

文件： time.c 项目： 420GrayFox/dsl-n55u-bender

void mips_timer_interrupt(void)
{
	/*
	if ((timer_tick_count++ % HZ) == 0) {
		mips_display_message(&display_string[display_count++]);
		if (display_count == MAX_DISPLAY_COUNT)
		        display_count = 0;

	}
	*/

	ll_timer_interrupt(RALINK_CPU_TIMER_IRQ);
}

示例#4

文件： q-irq.c 项目： Broadcom/stblinux-2.6.18

asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
{
	unsigned int pending = read_c0_status() & read_c0_cause();

	if (pending & 0x8000) {
		ll_timer_interrupt(Q_COUNT_COMPARE_IRQ, regs);
		return;
	}
	if (pending & 0x0400) {
		int irq = i8259_irq();

		if (likely(irq >= 0))
			do_IRQ(irq, regs);

		return;
	}
}

示例#5

文件： interrupt.c 项目： ivucica/linux

asmlinkage void plat_irq_dispatch(void)
{
	unsigned long int_status;
	unsigned int cause = read_c0_cause();
	int irq;

	if (cause & CAUSEF_IP7) {	/* R4000 count / compare IRQ */
		ll_timer_interrupt(7);
		return;
	}

	int_status = get_int_status();

	/* if int_status == 0, then the interrupt has already been cleared */
	if (int_status) {
		irq = ls1bit32(int_status);

		do_IRQ(irq);
	}
}

示例#6

文件： time.c 项目： Picture-Elements/linux-2.4-peijse

void sb1250_timer_interrupt(struct pt_regs *regs)
{
	int cpu = smp_processor_id();
	int irq = K_INT_TIMER_0+cpu;

	/* Reset the timer */
	out64(M_SCD_TIMER_ENABLE|M_SCD_TIMER_MODE_CONTINUOUS,
	      KSEG1 + A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));

	/*
	 * CPU 0 handles the global timer interrupt job
	 */
	if (cpu == 0) {
		ll_timer_interrupt(irq, regs);
	}

	/*
	 * every CPU should do profiling and process accouting
	 */
	ll_local_timer_interrupt(irq, regs);
}

示例#7

文件： time.c 项目： 3sOx/asuswrt-merlin

void bcm1480_timer_interrupt(void)
{
	int cpu = smp_processor_id();
	int irq = K_BCM1480_INT_TIMER_0 + cpu;

	/* Reset the timer */
	__raw_writeq(M_SCD_TIMER_ENABLE|M_SCD_TIMER_MODE_CONTINUOUS,
	      IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));

	if (cpu == 0) {
		/*
		 * CPU 0 handles the global timer interrupt job
		 */
		ll_timer_interrupt(irq);
	}
	else {
		/*
		 * other CPUs should just do profiling and process accounting
		 */
		ll_local_timer_interrupt(irq);
	}
}

示例#8

文件： time.c 项目： GodFox/magx_kernel_xpixl

void sb1250_timer_interrupt(struct pt_regs *regs)
{
	extern asmlinkage void ll_local_timer_interrupt(int irq, struct pt_regs *regs);
	int cpu = smp_processor_id();
	int irq = K_INT_TIMER_0 + cpu;

	/* Reset the timer */
	__bus_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
		     IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));

	/*
	 * CPU 0 handles the global timer interrupt job
	 */
	if (cpu == 0) {
		ll_timer_interrupt(irq, regs);
	}

	if (cpu != 0) {
		/*
		 * every CPU should do profiling and process accouting
		 */
		ll_local_timer_interrupt(irq, regs);
	}
}

示例#9

文件： ip32-irq.c 项目： GodFox/magx_kernel_xpixl

void ip32_irq5(struct pt_regs *regs)
{
	ll_timer_interrupt(IP32_R4K_TIMER_IRQ, regs);
}