int main(void)
{
platform_init();
soft_timer_init();
event_init();
uart_set_rx_handler(uart_print, char_handler_irq, NULL);
radio_queue = xQueueCreate(1, sizeof(int)); // radio sync queue
//init sensor
#ifdef IOTLAB_M3
isl29020_prepare(ISL29020_LIGHT__AMBIENT, ISL29020_RESOLUTION__16bit,
ISL29020_RANGE__1000lux);
isl29020_sample_continuous();
lps331ap_powerdown();
lps331ap_set_datarate(LPS331AP_P_12_5HZ_T_12_5HZ);
#endif
l3g4200d_powerdown();
l3g4200d_gyr_config(L3G4200D_200HZ, L3G4200D_250DPS, true);
lsm303dlhc_powerdown();
lsm303dlhc_mag_config(
LSM303DLHC_MAG_RATE_220HZ, LSM303DLHC_MAG_SCALE_2_5GAUSS,
LSM303DLHC_MAG_MODE_CONTINUOUS, LSM303DLHC_TEMP_MODE_ON);
lsm303dlhc_acc_config(
LSM303DLHC_ACC_RATE_400HZ, LSM303DLHC_ACC_SCALE_2G,
LSM303DLHC_ACC_UPDATE_ON_READ);
platform_run();
return 1;
}
static void hardware_init()
{
// Openlab platform init
platform_init();
event_init();
soft_timer_init();
// Switch off the LEDs
leds_off(LED_0 | LED_1 | LED_2);
// Uart initialisation
uart_set_rx_handler(uart_print, char_rx, NULL);
#ifdef IOTLAB_M3
// ISL29020 light sensor initialisation
isl29020_prepare(ISL29020_LIGHT__AMBIENT, ISL29020_RESOLUTION__16bit,
ISL29020_RANGE__16000lux);
isl29020_sample_continuous();
// LPS331AP pressure sensor initialisation
lps331ap_powerdown();
lps331ap_set_datarate(LPS331AP_P_12_5HZ_T_12_5HZ);
#endif
// Init csma Radio mac layer
mac_csma_init(CHANNEL, RADIO_POWER);
// Init control_node i2c
iotlab_i2c_init();
// Initialize a openlab timer
soft_timer_set_handler(&tx_timer, alarm, NULL);
soft_timer_start(&tx_timer, BLINK_PERIOD, 1);
}
uint8_t lps331ap_config(i2c_t i2c, exti_line_t data_ready_line)
{
uint8_t buf[2];
lps331ap.i2c = i2c;
lps331ap.data_ready_line = data_ready_line;
// Reboot memory content
buf[0] = CTRL_REG2;
buf[1] = 0x80;
return i2c_tx(lps331ap.i2c, LPS331AP_ADDRESS, buf, 2) || lps331ap_powerdown();
}
