int EDIT_TOOL::Flip( const TOOL_EVENT& aEvent ) { const SELECTION& selection = m_selectionTool->GetSelection(); // Shall the selection be cleared at the end? bool unselect = selection.Empty(); if( !hoverSelection() || m_selectionTool->CheckLock() == SELECTION_LOCKED ) return 0; wxPoint flipPoint = getModificationPoint( selection ); for( unsigned int i = 0; i < selection.items.GetCount(); ++i ) { BOARD_ITEM* item = selection.Item<BOARD_ITEM>( i ); m_commit->Modify( item ); item->Flip( flipPoint ); } if( !m_dragging ) m_commit->Push( _( "Flip" ) ); if( unselect ) m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true ); m_toolMgr->RunAction( COMMON_ACTIONS::editModifiedSelection, true ); return 0; }
void PCB_EDIT_FRAME::Block_Flip() { #define INVERT( pos ) (pos) = center.y - ( (pos) - center.y ) wxPoint memo; wxPoint center; // Position of the axis for inversion of all elements OnModify(); PICKED_ITEMS_LIST* itemsList = &GetScreen()->m_BlockLocate.GetItems(); itemsList->m_Status = UR_FLIPPED; memo = GetCrossHairPosition(); center = GetScreen()->m_BlockLocate.Centre(); for( unsigned ii = 0; ii < itemsList->GetCount(); ii++ ) { BOARD_ITEM* item = (BOARD_ITEM*) itemsList->GetPickedItem( ii ); wxASSERT( item ); itemsList->SetPickedItemStatus( UR_FLIPPED, ii ); item->Flip( center ); switch( item->Type() ) { case PCB_MODULE_T: item->ClearFlags(); m_Pcb->m_Status_Pcb = 0; break; // Move and rotate the track segments case PCB_TRACE_T: // a track segment (segment on a copper layer) case PCB_VIA_T: // a via (like track segment on a copper layer) m_Pcb->m_Status_Pcb = 0; break; case PCB_ZONE_AREA_T: case PCB_LINE_T: case PCB_TEXT_T: case PCB_TARGET_T: case PCB_DIMENSION_T: break; // This item is not put in undo list case PCB_ZONE_T: // SEG_ZONE items are now deprecated itemsList->RemovePicker( ii ); ii--; break; default: wxMessageBox( wxT( "PCB_EDIT_FRAME::Block_Flip( ) error: unexpected type" ) ); break; } } SaveCopyInUndoList( *itemsList, UR_FLIPPED, center ); Compile_Ratsnest( NULL, true ); m_canvas->Refresh( true ); }
int EDIT_TOOL::Flip( TOOL_EVENT& aEvent ) { const SELECTION& selection = m_selectionTool->GetSelection(); PCB_BASE_FRAME* editFrame = getEditFrame<PCB_BASE_FRAME>(); // Shall the selection be cleared at the end? bool unselect = selection.Empty(); if( !makeSelection( selection ) || m_selectionTool->CheckLock() ) { setTransitions(); return 0; } wxPoint flipPoint = getModificationPoint( selection ); if( !m_dragging ) // If it is being dragged, then it is already saved with UR_CHANGED flag { editFrame->OnModify(); editFrame->SaveCopyInUndoList( selection.items, UR_FLIPPED, flipPoint ); } for( unsigned int i = 0; i < selection.items.GetCount(); ++i ) { BOARD_ITEM* item = selection.Item<BOARD_ITEM>( i ); item->Flip( flipPoint ); if( !m_dragging ) item->ViewUpdate( KIGFX::VIEW_ITEM::LAYERS ); } updateRatsnest( m_dragging ); // Update dragging offset (distance between cursor and the first dragged item) m_offset = static_cast<BOARD_ITEM*>( selection.items.GetPickedItem( 0 ) )->GetPosition() - flipPoint; if( m_dragging ) selection.group->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY ); else getModel<BOARD>()->GetRatsnest()->Recalculate(); if( unselect ) m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true ); m_toolMgr->RunAction( COMMON_ACTIONS::pointEditorUpdate, true ); setTransitions(); return 0; }
void PCB_BASE_EDIT_FRAME::PutDataInPreviousState( PICKED_ITEMS_LIST* aList, bool aRedoCommand, bool aRebuildRatsnet ) { BOARD_ITEM* item; bool not_found = false; bool reBuild_ratsnest = false; bool deep_reBuild_ratsnest = false; // true later if pointers must be rebuilt auto view = GetGalCanvas()->GetView(); auto connectivity = GetBoard()->GetConnectivity(); // Undo in the reverse order of list creation: (this can allow stacked changes // like the same item can be changes and deleted in the same complex command bool build_item_list = true; // if true the list of existing items must be rebuilt // Restore changes in reverse order for( int ii = aList->GetCount() - 1; ii >= 0 ; ii-- ) { item = (BOARD_ITEM*) aList->GetPickedItem( ii ); wxASSERT( item ); /* Test for existence of item on board. * It could be deleted, and no more on board: * - if a call to SaveCopyInUndoList was forgotten in Pcbnew * - in zones outlines, when a change in one zone merges this zone with an other * This test avoids a Pcbnew crash * Obviously, this test is not made for deleted items */ UNDO_REDO_T status = aList->GetPickedItemStatus( ii ); if( status != UR_DELETED && status != UR_DRILLORIGIN // origin markers never on board && status != UR_GRIDORIGIN ) // origin markers never on board { if( build_item_list ) // Build list of existing items, for integrity test TestForExistingItem( GetBoard(), NULL ); build_item_list = false; if( !TestForExistingItem( GetBoard(), item ) ) { // Checking if it ever happens wxASSERT_MSG( false, "Item in the undo buffer does not exist" ); // Remove this non existent item aList->RemovePicker( ii ); ii++; // the current item was removed, ii points now the next item // decrement it because it will be incremented later not_found = true; continue; } } item->ClearFlags(); // see if we must rebuild ratsnets and pointers lists switch( item->Type() ) { case PCB_MODULE_T: deep_reBuild_ratsnest = true; // Pointers on pads can be invalid // Fall through case PCB_ZONE_AREA_T: case PCB_TRACE_T: case PCB_VIA_T: reBuild_ratsnest = true; break; case PCB_NETINFO_T: reBuild_ratsnest = true; deep_reBuild_ratsnest = true; break; default: break; } // It is possible that we are going to replace the selected item, so clear it SetCurItem( NULL ); switch( aList->GetPickedItemStatus( ii ) ) { case UR_CHANGED: /* Exchange old and new data for each item */ { BOARD_ITEM* image = (BOARD_ITEM*) aList->GetPickedItemLink( ii ); // Remove all pads/drawings/texts, as they become invalid // for the VIEW after SwapData() called for modules view->Remove( item ); connectivity->Remove( item ); SwapItemData( item, image ); // Update all pads/drawings/texts, as they become invalid // for the VIEW after SwapData() called for modules if( item->Type() == PCB_MODULE_T ) { MODULE* newModule = static_cast<MODULE*>( item ); newModule->RunOnChildren( std::bind( &BOARD_ITEM::ClearFlags, _1, EDA_ITEM_ALL_FLAGS )); } view->Add( item ); connectivity->Add( item ); item->ClearFlags(); } break; case UR_NEW: /* new items are deleted */ aList->SetPickedItemStatus( UR_DELETED, ii ); GetModel()->Remove( item ); view->Remove( item ); break; case UR_DELETED: /* deleted items are put in List, as new items */ aList->SetPickedItemStatus( UR_NEW, ii ); GetModel()->Add( item ); view->Add( item ); build_item_list = true; break; case UR_MOVED: item->Move( aRedoCommand ? aList->m_TransformPoint : -aList->m_TransformPoint ); view->Update( item, KIGFX::GEOMETRY ); connectivity->Update( item ); break; case UR_ROTATED: item->Rotate( aList->m_TransformPoint, aRedoCommand ? m_rotationAngle : -m_rotationAngle ); view->Update( item, KIGFX::GEOMETRY ); connectivity->Update( item ); break; case UR_ROTATED_CLOCKWISE: item->Rotate( aList->m_TransformPoint, aRedoCommand ? -m_rotationAngle : m_rotationAngle ); view->Update( item, KIGFX::GEOMETRY ); connectivity->Update( item ); break; case UR_FLIPPED: item->Flip( aList->m_TransformPoint ); view->Update( item, KIGFX::LAYERS ); connectivity->Update( item ); break; case UR_DRILLORIGIN: case UR_GRIDORIGIN: { BOARD_ITEM* image = (BOARD_ITEM*) aList->GetPickedItemLink( ii ); VECTOR2D origin = image->GetPosition(); image->SetPosition( item->GetPosition() ); if( aList->GetPickedItemStatus( ii ) == UR_DRILLORIGIN ) PCB_EDITOR_CONTROL::DoSetDrillOrigin( view, this, item, origin ); else PCBNEW_CONTROL::DoSetGridOrigin( view, this, item, origin ); } break; default: { wxLogDebug( wxT( "PutDataInPreviousState() error (unknown code %X)" ), aList->GetPickedItemStatus( ii ) ); } break; } } if( not_found ) wxMessageBox( _( "Incomplete undo/redo operation: some items not found" ) ); // Rebuild pointers and connectivity that can be changed. // connectivity can be rebuilt only in the board editor frame if( IsType( FRAME_PCB ) && ( reBuild_ratsnest || deep_reBuild_ratsnest ) ) { Compile_Ratsnest( NULL, false ); } GetBoard()->SanitizeNetcodes(); }
void PCB_EDIT_FRAME::PutDataInPreviousState( PICKED_ITEMS_LIST* aList, bool aRedoCommand, bool aRebuildRatsnet ) { BOARD_ITEM* item; bool not_found = false; bool reBuild_ratsnest = false; KIGFX::VIEW* view = GetGalCanvas()->GetView(); RN_DATA* ratsnest = GetBoard()->GetRatsnest(); // Undo in the reverse order of list creation: (this can allow stacked changes // like the same item can be changes and deleted in the same complex command bool build_item_list = true; // if true the list of existing items must be rebuilt for( int ii = aList->GetCount() - 1; ii >= 0 ; ii-- ) { item = (BOARD_ITEM*) aList->GetPickedItem( ii ); wxASSERT( item ); /* Test for existence of item on board. * It could be deleted, and no more on board: * - if a call to SaveCopyInUndoList was forgotten in Pcbnew * - in zones outlines, when a change in one zone merges this zone with an other * This test avoids a Pcbnew crash * Obviously, this test is not made for deleted items */ UNDO_REDO_T status = aList->GetPickedItemStatus( ii ); if( status != UR_DELETED ) { if( build_item_list ) // Build list of existing items, for integrity test TestForExistingItem( GetBoard(), NULL ); build_item_list = false; if( !TestForExistingItem( GetBoard(), item ) ) { // Remove this non existent item aList->RemovePicker( ii ); ii++; // the current item was removed, ii points now the next item // decrement it because it will be incremented later not_found = true; continue; } } item->ClearFlags(); // see if we must rebuild ratsnets and pointers lists switch( item->Type() ) { case PCB_MODULE_T: case PCB_ZONE_AREA_T: case PCB_TRACE_T: case PCB_VIA_T: reBuild_ratsnest = true; break; default: break; } switch( aList->GetPickedItemStatus( ii ) ) { case UR_CHANGED: /* Exchange old and new data for each item */ { BOARD_ITEM* image = (BOARD_ITEM*) aList->GetPickedItemLink( ii ); // Remove all pads/drawings/texts, as they become invalid // for the VIEW after SwapData() called for modules if( item->Type() == PCB_MODULE_T ) { MODULE* oldModule = static_cast<MODULE*>( item ); oldModule->RunOnChildren( boost::bind( &KIGFX::VIEW::Remove, view, _1 ) ); } ratsnest->Remove( item ); item->SwapData( image ); // Update all pads/drawings/texts, as they become invalid // for the VIEW after SwapData() called for modules if( item->Type() == PCB_MODULE_T ) { MODULE* newModule = static_cast<MODULE*>( item ); newModule->RunOnChildren( boost::bind( &KIGFX::VIEW::Add, view, _1 ) ); } ratsnest->Add( item ); item->ClearFlags( SELECTED ); item->ViewUpdate( KIGFX::VIEW_ITEM::LAYERS ); } break; case UR_NEW: /* new items are deleted */ aList->SetPickedItemStatus( UR_DELETED, ii ); GetBoard()->Remove( item ); if( item->Type() == PCB_MODULE_T ) { MODULE* module = static_cast<MODULE*>( item ); module->RunOnChildren( boost::bind( &KIGFX::VIEW::Remove, view, _1 ) ); } view->Remove( item ); item->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY ); break; case UR_DELETED: /* deleted items are put in List, as new items */ aList->SetPickedItemStatus( UR_NEW, ii ); GetBoard()->Add( item ); if( item->Type() == PCB_MODULE_T ) { MODULE* module = static_cast<MODULE*>( item ); module->RunOnChildren( boost::bind( &KIGFX::VIEW::Add, view, _1) ); } view->Add( item ); item->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY ); build_item_list = true; break; case UR_MOVED: item->Move( aRedoCommand ? aList->m_TransformPoint : -aList->m_TransformPoint ); item->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY ); ratsnest->Update( item ); break; case UR_ROTATED: item->Rotate( aList->m_TransformPoint, aRedoCommand ? m_rotationAngle : -m_rotationAngle ); item->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY ); ratsnest->Update( item ); break; case UR_ROTATED_CLOCKWISE: item->Rotate( aList->m_TransformPoint, aRedoCommand ? -m_rotationAngle : m_rotationAngle ); item->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY ); ratsnest->Update( item ); break; case UR_FLIPPED: item->Flip( aList->m_TransformPoint ); item->ViewUpdate( KIGFX::VIEW_ITEM::LAYERS ); ratsnest->Update( item ); break; default: { wxString msg; msg.Printf( wxT( "PutDataInPreviousState() error (unknown code %X)" ), aList->GetPickedItemStatus( ii ) ); wxMessageBox( msg ); } break; } } if( not_found ) wxMessageBox( wxT( "Incomplete undo/redo operation: some items not found" ) ); // Rebuild pointers and ratsnest that can be changed. if( reBuild_ratsnest && aRebuildRatsnet ) { if( IsGalCanvasActive() ) ratsnest->Recalculate(); else Compile_Ratsnest( NULL, true ); } }
/** * Function PutDataInPreviousState * Used in undo or redo command. * Put data pointed by List in the previous state, i.e. the state memorised by List * @param aList = a PICKED_ITEMS_LIST pointer to the list of items to undo/redo * @param aRedoCommand = a bool: true for redo, false for undo * @param aRebuildRatsnet = a bool: true to rebuid ratsnet (normal use, and default), false * to just retrieve las state (used in abort commands that do not need to rebuild ratsnest) */ void PCB_EDIT_FRAME::PutDataInPreviousState( PICKED_ITEMS_LIST* aList, bool aRedoCommand, bool aRebuildRatsnet ) { BOARD_ITEM* item; bool not_found = false; bool reBuild_ratsnest = false; // Undo in the reverse order of list creation: (this can allow stacked changes // like the same item can be changes and deleted in the same complex command bool build_item_list = true; // if true the list of esiting items must be rebuilt for( int ii = aList->GetCount()-1; ii >= 0 ; ii-- ) { item = (BOARD_ITEM*) aList->GetPickedItem( ii ); wxASSERT( item ); /* Test for existence of item on board. * It could be deleted, and no more on board: * - if a call to SaveCopyInUndoList was forgotten in Pcbnew * - in zones outlines, when a change in one zone merges this zone with an other * This test avoids a Pcbnew crash * Obviouly, this test is not made for deleted items */ UNDO_REDO_T status = aList->GetPickedItemStatus( ii ); if( status != UR_DELETED ) { if( build_item_list ) // Build list of existing items, for integrity test TestForExistingItem( GetBoard(), NULL ); build_item_list = false; if( !TestForExistingItem( GetBoard(), item ) ) { // Remove this non existant item aList->RemovePicker( ii ); ii++; // the current item was removed, ii points now the next item // decrement it because it will be incremented later not_found = true; continue; } } item->ClearFlags(); // see if we must rebuild ratsnets and pointers lists switch( item->Type() ) { case PCB_MODULE_T: case PCB_ZONE_AREA_T: case PCB_TRACE_T: case PCB_VIA_T: reBuild_ratsnest = true; break; default: break; } switch( aList->GetPickedItemStatus( ii ) ) { case UR_CHANGED: /* Exchange old and new data for each item */ { BOARD_ITEM* image = (BOARD_ITEM*) aList->GetPickedItemLink( ii ); SwapData( item, image ); } break; case UR_NEW: /* new items are deleted */ aList->SetPickedItemStatus( UR_DELETED, ii ); GetBoard()->Remove( item ); break; case UR_DELETED: /* deleted items are put in List, as new items */ aList->SetPickedItemStatus( UR_NEW, ii ); GetBoard()->Add( item ); build_item_list = true; break; case UR_MOVED: item->Move( aRedoCommand ? aList->m_TransformPoint : -aList->m_TransformPoint ); break; case UR_ROTATED: item->Rotate( aList->m_TransformPoint, aRedoCommand ? 900 : -900 ); break; case UR_ROTATED_CLOCKWISE: item->Rotate( aList->m_TransformPoint, aRedoCommand ? -900 : 900 ); break; case UR_FLIPPED: item->Flip( aList->m_TransformPoint ); break; default: { wxString msg; msg.Printf( wxT( "PutDataInPreviousState() error (unknown code %X)" ), aList->GetPickedItemStatus( ii ) ); wxMessageBox( msg ); } break; } } if( not_found ) wxMessageBox( wxT( "Incomplete undo/redo operation: some items not found" ) ); // Rebuild pointers and rastnest that can be changed. if( reBuild_ratsnest && aRebuildRatsnet ) Compile_Ratsnest( NULL, true ); }
int DRAWING_TOOL::PlaceText( const TOOL_EVENT& aEvent ) { BOARD_ITEM* text = NULL; const BOARD_DESIGN_SETTINGS& dsnSettings = m_frame->GetDesignSettings(); BOARD_COMMIT commit( m_frame ); // Add a VIEW_GROUP that serves as a preview for the new item SELECTION preview( m_view ); m_view->Add( &preview ); m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true ); m_controls->ShowCursor( true ); m_controls->SetSnapping( true ); // do not capture or auto-pan until we start placing some text SCOPED_DRAW_MODE scopedDrawMode( m_mode, MODE::TEXT ); Activate(); m_frame->SetToolID( m_editModules ? ID_MODEDIT_TEXT_TOOL : ID_PCB_ADD_TEXT_BUTT, wxCURSOR_PENCIL, _( "Add text" ) ); // Main loop: keep receiving events while( OPT_TOOL_EVENT evt = Wait() ) { VECTOR2I cursorPos = m_controls->GetCursorPosition(); if( evt->IsCancel() || evt->IsActivate() ) { if( text ) { // Delete the old text and have another try delete text; text = NULL; preview.Clear(); m_controls->SetAutoPan( false ); m_controls->CaptureCursor( false ); m_controls->ShowCursor( true ); } else break; if( evt->IsActivate() ) // now finish unconditionally break; } else if( text && evt->Category() == TC_COMMAND ) { if( evt->IsAction( &COMMON_ACTIONS::rotate ) ) { text->Rotate( text->GetPosition(), m_frame->GetRotationAngle() ); m_view->Update( &preview ); } // TODO rotate CCW else if( evt->IsAction( &COMMON_ACTIONS::flip ) ) { text->Flip( text->GetPosition() ); m_view->Update( &preview ); } } else if ( evt->IsClick( BUT_RIGHT ) ) { showContextMenu(); } else if( evt->IsClick( BUT_LEFT ) ) { if( !text ) { // Init the new item attributes if( m_editModules ) { TEXTE_MODULE* textMod = new TEXTE_MODULE( (MODULE*) m_frame->GetModel() ); textMod->SetLayer( m_frame->GetActiveLayer() ); textMod->SetSize( dsnSettings.m_ModuleTextSize ); textMod->SetThickness( dsnSettings.m_ModuleTextWidth ); textMod->SetTextPosition( wxPoint( cursorPos.x, cursorPos.y ) ); DialogEditModuleText textDialog( m_frame, textMod, NULL ); bool placing; RunMainStack( [&]() { placing = textDialog.ShowModal() && ( textMod->GetText().Length() > 0 ); } ); if( placing ) text = textMod; else delete textMod; } else { TEXTE_PCB* textPcb = new TEXTE_PCB( m_frame->GetModel() ); // TODO we have to set IS_NEW, otherwise InstallTextPCB.. creates an undo entry :| LEGACY_CLEANUP textPcb->SetFlags( IS_NEW ); LAYER_ID layer = m_frame->GetActiveLayer(); textPcb->SetLayer( layer ); // Set the mirrored option for layers on the BACK side of the board if( IsBackLayer( layer ) ) textPcb->SetMirrored( true ); textPcb->SetSize( dsnSettings.m_PcbTextSize ); textPcb->SetThickness( dsnSettings.m_PcbTextWidth ); textPcb->SetTextPosition( wxPoint( cursorPos.x, cursorPos.y ) ); RunMainStack( [&]() { getEditFrame<PCB_EDIT_FRAME>()->InstallTextPCBOptionsFrame( textPcb, NULL ); } ); if( textPcb->GetText().IsEmpty() ) delete textPcb; else text = textPcb; } if( text == NULL ) continue; m_controls->CaptureCursor( true ); m_controls->SetAutoPan( true ); //m_controls->ShowCursor( false ); preview.Add( text ); } else { //assert( text->GetText().Length() > 0 ); //assert( text->GetSize().x > 0 && text->GetSize().y > 0 ); text->ClearFlags(); preview.Remove( text ); commit.Add( text ); commit.Push( _( "Place a text" ) ); m_controls->CaptureCursor( false ); m_controls->SetAutoPan( false ); m_controls->ShowCursor( true ); text = NULL; } } else if( text && evt->IsMotion() ) { text->SetPosition( wxPoint( cursorPos.x, cursorPos.y ) ); // Show a preview of the item m_view->Update( &preview ); } } m_controls->ShowCursor( false ); m_controls->SetSnapping( false ); m_controls->SetAutoPan( false ); m_controls->CaptureCursor( false ); m_view->Remove( &preview ); m_frame->SetToolID( ID_NO_TOOL_SELECTED, wxCURSOR_DEFAULT, wxEmptyString ); return 0; }