//----------------------------------------------------------------------
// Get the section data the file on disk
//----------------------------------------------------------------------
size_t
ObjectFile::ReadSectionData (const Section *section, DataExtractor& section_data) const
{
if (IsInMemory())
{
ProcessSP process_sp (m_process_wp.lock());
if (process_sp)
{
DataBufferSP data_sp (ReadMemory (process_sp, section->GetLoadBaseAddress (&process_sp->GetTarget()), section->GetByteSize()));
if (data_sp)
{
section_data.SetData (data_sp, 0, data_sp->GetByteSize());
section_data.SetByteOrder (process_sp->GetByteOrder());
section_data.SetAddressByteSize (process_sp->GetAddressByteSize());
return section_data.GetByteSize();
}
}
}
else
{
// The object file now contains a full mmap'ed copy of the object file data, so just use this
return MemoryMapSectionData (section, section_data);
}
section_data.Clear();
return 0;
}
//----------------------------------------------------------------------
// Get the section data the file on disk
//----------------------------------------------------------------------
size_t
ObjectFile::ReadSectionData (const Section *section, DataExtractor& section_data) const
{
// If some other objectfile owns this data, pass this to them.
if (section->GetObjectFile() != this)
return section->GetObjectFile()->ReadSectionData (section, section_data);
if (IsInMemory())
{
ProcessSP process_sp (m_process_wp.lock());
if (process_sp)
{
const addr_t base_load_addr = section->GetLoadBaseAddress (&process_sp->GetTarget());
if (base_load_addr != LLDB_INVALID_ADDRESS)
{
DataBufferSP data_sp (ReadMemory (process_sp, base_load_addr, section->GetByteSize()));
if (data_sp)
{
section_data.SetData (data_sp, 0, data_sp->GetByteSize());
section_data.SetByteOrder (process_sp->GetByteOrder());
section_data.SetAddressByteSize (process_sp->GetAddressByteSize());
return section_data.GetByteSize();
}
}
}
}
else
{
// The object file now contains a full mmap'ed copy of the object file data, so just use this
return MemoryMapSectionData (section, section_data);
}
section_data.Clear();
return 0;
}
uint32_t Opcode::GetData(DataExtractor &data) const {
uint32_t byte_size = GetByteSize();
uint8_t swap_buf[8];
const void *buf = nullptr;
if (byte_size > 0) {
if (!GetEndianSwap()) {
if (m_type == Opcode::eType16_2) {
// 32 bit thumb instruction, we need to sizzle this a bit
swap_buf[0] = m_data.inst.bytes[2];
swap_buf[1] = m_data.inst.bytes[3];
swap_buf[2] = m_data.inst.bytes[0];
swap_buf[3] = m_data.inst.bytes[1];
buf = swap_buf;
} else {
buf = GetOpcodeDataBytes();
}
} else {
switch (m_type) {
case Opcode::eTypeInvalid:
break;
case Opcode::eType8:
buf = GetOpcodeDataBytes();
break;
case Opcode::eType16:
*(uint16_t *)swap_buf = llvm::ByteSwap_16(m_data.inst16);
buf = swap_buf;
break;
case Opcode::eType16_2:
swap_buf[0] = m_data.inst.bytes[1];
swap_buf[1] = m_data.inst.bytes[0];
swap_buf[2] = m_data.inst.bytes[3];
swap_buf[3] = m_data.inst.bytes[2];
buf = swap_buf;
break;
case Opcode::eType32:
*(uint32_t *)swap_buf = llvm::ByteSwap_32(m_data.inst32);
buf = swap_buf;
break;
case Opcode::eType64:
*(uint32_t *)swap_buf = llvm::ByteSwap_64(m_data.inst64);
buf = swap_buf;
break;
case Opcode::eTypeBytes:
buf = GetOpcodeDataBytes();
break;
}
}
}
if (buf != nullptr) {
DataBufferSP buffer_sp;
buffer_sp.reset(new DataBufferHeap(buf, byte_size));
data.SetByteOrder(GetDataByteOrder());
data.SetData(buffer_sp);
return byte_size;
}
data.Clear();
return 0;
}
size_t
CommunicationKDP::WaitForPacketWithTimeoutMicroSecondsNoLock (DataExtractor &packet, uint32_t timeout_usec)
{
uint8_t buffer[8192];
Error error;
LogSP log (ProcessKDPLog::GetLogIfAllCategoriesSet (KDP_LOG_PACKETS | KDP_LOG_VERBOSE));
// Check for a packet from our cache first without trying any reading...
if (CheckForPacket (NULL, 0, packet))
return packet.GetByteSize();
bool timed_out = false;
while (IsConnected() && !timed_out)
{
lldb::ConnectionStatus status = eConnectionStatusNoConnection;
size_t bytes_read = Read (buffer, sizeof(buffer), timeout_usec, status, &error);
if (log)
log->Printf ("%s: Read (buffer, (sizeof(buffer), timeout_usec = 0x%x, status = %s, error = %s) => bytes_read = %" PRIu64,
__PRETTY_FUNCTION__,
timeout_usec,
Communication::ConnectionStatusAsCString (status),
error.AsCString(),
(uint64_t)bytes_read);
if (bytes_read > 0)
{
if (CheckForPacket (buffer, bytes_read, packet))
return packet.GetByteSize();
}
else
{
switch (status)
{
case eConnectionStatusTimedOut:
timed_out = true;
break;
case eConnectionStatusSuccess:
//printf ("status = success but error = %s\n", error.AsCString("<invalid>"));
break;
case eConnectionStatusEndOfFile:
case eConnectionStatusNoConnection:
case eConnectionStatusLostConnection:
case eConnectionStatusError:
Disconnect();
break;
}
}
}
packet.Clear ();
return 0;
}
size_t CommunicationKDP::WaitForPacketWithTimeoutMicroSecondsNoLock(
DataExtractor &packet, uint32_t timeout_usec) {
uint8_t buffer[8192];
Status error;
Log *log(ProcessKDPLog::GetLogIfAllCategoriesSet(KDP_LOG_PACKETS));
// Check for a packet from our cache first without trying any reading...
if (CheckForPacket(NULL, 0, packet))
return packet.GetByteSize();
bool timed_out = false;
while (IsConnected() && !timed_out) {
lldb::ConnectionStatus status = eConnectionStatusNoConnection;
size_t bytes_read = Read(buffer, sizeof(buffer),
timeout_usec == UINT32_MAX
? Timeout<std::micro>(llvm::None)
: std::chrono::microseconds(timeout_usec),
status, &error);
LLDB_LOGV(log,
"Read (buffer, sizeof(buffer), timeout_usec = 0x{0:x}, "
"status = {1}, error = {2}) => bytes_read = {4}",
timeout_usec,
Communication::ConnectionStatusAsCString(status),
error, bytes_read);
if (bytes_read > 0) {
if (CheckForPacket(buffer, bytes_read, packet))
return packet.GetByteSize();
} else {
switch (status) {
case eConnectionStatusInterrupted:
case eConnectionStatusTimedOut:
timed_out = true;
break;
case eConnectionStatusSuccess:
// printf ("status = success but error = %s\n",
// error.AsCString("<invalid>"));
break;
case eConnectionStatusEndOfFile:
case eConnectionStatusNoConnection:
case eConnectionStatusLostConnection:
case eConnectionStatusError:
Disconnect();
break;
}
}
}
packet.Clear();
return 0;
}
uint32_t
Opcode::GetData (DataExtractor &data, lldb::AddressClass address_class) const
{
uint32_t byte_size = GetByteSize ();
DataBufferSP buffer_sp;
if (byte_size > 0)
{
switch (m_type)
{
case Opcode::eTypeInvalid:
break;
case Opcode::eType8: buffer_sp.reset (new DataBufferHeap (&m_data.inst8, byte_size)); break;
case Opcode::eType16: buffer_sp.reset (new DataBufferHeap (&m_data.inst16, byte_size)); break;
case Opcode::eType32:
{
// The only thing that uses eAddressClassCodeAlternateISA currently
// is Thumb. If this ever changes, we will need to pass in more
// information like an additional "const ArchSpec &arch". For now
// this will do
if (address_class == eAddressClassCodeAlternateISA)
{
// 32 bit thumb instruction, we need to sizzle this a bit
uint8_t buf[4];
buf[0] = m_data.inst.bytes[2];
buf[1] = m_data.inst.bytes[3];
buf[2] = m_data.inst.bytes[0];
buf[3] = m_data.inst.bytes[1];
buffer_sp.reset (new DataBufferHeap (buf, byte_size));
break;
}
buffer_sp.reset (new DataBufferHeap (&m_data.inst32, byte_size));
}
break;
case Opcode::eType64: buffer_sp.reset (new DataBufferHeap (&m_data.inst64, byte_size)); break;
case Opcode::eTypeBytes:buffer_sp.reset (new DataBufferHeap (GetOpcodeBytes(), byte_size)); break;
break;
}
}
if (buffer_sp)
{
data.SetByteOrder(GetDataByteOrder());
data.SetData (buffer_sp);
return byte_size;
}
data.Clear();
return 0;
}
size_t
ObjectFile::MemoryMapSectionData (const Section *section, DataExtractor& section_data) const
{
if (IsInMemory())
{
return ReadSectionData (section, section_data);
}
else
{
// The object file now contains a full mmap'ed copy of the object file data, so just use this
return GetData(section->GetFileOffset(), section->GetFileSize(), section_data);
}
section_data.Clear();
return 0;
}
bool
CommunicationKDP::SendRequestAndGetReply (const CommandType command,
const uint8_t request_sequence_id,
const PacketStreamType &request_packet,
DataExtractor &reply_packet)
{
if (IsRunning())
{
LogSP log (ProcessKDPLog::GetLogIfAllCategoriesSet (KDP_LOG_PACKETS));
if (log)
{
PacketStreamType log_strm;
DumpPacket (log_strm, request_packet.GetData(), request_packet.GetSize());
log->Printf("error: kdp running, not sending packet: %.*s", (uint32_t)log_strm.GetSize(), log_strm.GetData());
}
return false;
}
Mutex::Locker locker(m_sequence_mutex);
#ifdef LLDB_CONFIGURATION_DEBUG
// NOTE: this only works for packets that are in native endian byte order
assert (request_packet.GetSize() == *((uint16_t *)(request_packet.GetData() + 2)));
#endif
if (SendRequestPacketNoLock(request_packet))
{
if (WaitForPacketWithTimeoutMicroSecondsNoLock (reply_packet, GetPacketTimeoutInMicroSeconds ()))
{
uint32_t offset = 0;
const uint8_t reply_command = reply_packet.GetU8 (&offset);
const uint8_t reply_sequence_id = reply_packet.GetU8 (&offset);
if ((reply_command & eCommandTypeMask) == command)
{
if (request_sequence_id == reply_sequence_id)
{
if (command == KDP_RESUMECPUS)
m_is_running.SetValue(true, eBroadcastAlways);
return true;
}
}
}
}
reply_packet.Clear();
return false;
}
size_t
ObjectFile::MemoryMapSectionData (const Section *section, DataExtractor& section_data) const
{
// If some other objectfile owns this data, pass this to them.
if (section->GetObjectFile() != this)
return section->GetObjectFile()->MemoryMapSectionData (section, section_data);
if (IsInMemory())
{
return ReadSectionData (section, section_data);
}
else
{
// The object file now contains a full mmap'ed copy of the object file data, so just use this
return GetData(section->GetFileOffset(), section->GetFileSize(), section_data);
}
section_data.Clear();
return 0;
}
Error
Value::GetValueAsData (ExecutionContext *exe_ctx,
DataExtractor &data,
uint32_t data_offset,
Module *module)
{
data.Clear();
Error error;
lldb::addr_t address = LLDB_INVALID_ADDRESS;
AddressType address_type = eAddressTypeFile;
Address file_so_addr;
const CompilerType &ast_type = GetCompilerType();
switch (m_value_type)
{
case eValueTypeVector:
if (ast_type.IsValid())
data.SetAddressByteSize (ast_type.GetPointerByteSize());
else
data.SetAddressByteSize(sizeof(void *));
data.SetData(m_vector.bytes, m_vector.length, m_vector.byte_order);
break;
case eValueTypeScalar:
{
data.SetByteOrder (endian::InlHostByteOrder());
if (ast_type.IsValid())
data.SetAddressByteSize (ast_type.GetPointerByteSize());
else
data.SetAddressByteSize(sizeof(void *));
uint32_t limit_byte_size = UINT32_MAX;
if (ast_type.IsValid() && ast_type.IsScalarType())
{
uint64_t type_encoding_count = 0;
lldb::Encoding type_encoding = ast_type.GetEncoding(type_encoding_count);
if (type_encoding == eEncodingUint || type_encoding == eEncodingSint)
limit_byte_size = ast_type.GetByteSize(exe_ctx ? exe_ctx->GetBestExecutionContextScope() : nullptr);
}
if (m_value.GetData (data, limit_byte_size))
return error; // Success;
error.SetErrorStringWithFormat("extracting data from value failed");
break;
}
case eValueTypeLoadAddress:
if (exe_ctx == NULL)
{
error.SetErrorString ("can't read load address (no execution context)");
}
else
{
Process *process = exe_ctx->GetProcessPtr();
if (process == NULL || !process->IsAlive())
{
Target *target = exe_ctx->GetTargetPtr();
if (target)
{
// Allow expressions to run and evaluate things when the target
// has memory sections loaded. This allows you to use "target modules load"
// to load your executable and any shared libraries, then execute
// commands where you can look at types in data sections.
const SectionLoadList &target_sections = target->GetSectionLoadList();
if (!target_sections.IsEmpty())
{
address = m_value.ULongLong(LLDB_INVALID_ADDRESS);
if (target_sections.ResolveLoadAddress(address, file_so_addr))
{
address_type = eAddressTypeLoad;
data.SetByteOrder(target->GetArchitecture().GetByteOrder());
data.SetAddressByteSize(target->GetArchitecture().GetAddressByteSize());
}
else
address = LLDB_INVALID_ADDRESS;
}
// else
// {
// ModuleSP exe_module_sp (target->GetExecutableModule());
// if (exe_module_sp)
// {
// address = m_value.ULongLong(LLDB_INVALID_ADDRESS);
// if (address != LLDB_INVALID_ADDRESS)
// {
// if (exe_module_sp->ResolveFileAddress(address, file_so_addr))
// {
// data.SetByteOrder(target->GetArchitecture().GetByteOrder());
// data.SetAddressByteSize(target->GetArchitecture().GetAddressByteSize());
// address_type = eAddressTypeFile;
// }
// else
// {
// address = LLDB_INVALID_ADDRESS;
// }
// }
// }
// }
}
else
{
error.SetErrorString ("can't read load address (invalid process)");
}
}
else
{
address = m_value.ULongLong(LLDB_INVALID_ADDRESS);
address_type = eAddressTypeLoad;
data.SetByteOrder(process->GetTarget().GetArchitecture().GetByteOrder());
data.SetAddressByteSize(process->GetTarget().GetArchitecture().GetAddressByteSize());
}
}
break;
case eValueTypeFileAddress:
if (exe_ctx == NULL)
{
error.SetErrorString ("can't read file address (no execution context)");
}
else if (exe_ctx->GetTargetPtr() == NULL)
{
error.SetErrorString ("can't read file address (invalid target)");
}
else
{
address = m_value.ULongLong(LLDB_INVALID_ADDRESS);
if (address == LLDB_INVALID_ADDRESS)
{
error.SetErrorString ("invalid file address");
}
else
{
if (module == NULL)
{
// The only thing we can currently lock down to a module so that
// we can resolve a file address, is a variable.
Variable *variable = GetVariable();
if (variable)
{
SymbolContext var_sc;
variable->CalculateSymbolContext(&var_sc);
module = var_sc.module_sp.get();
}
}
if (module)
{
bool resolved = false;
ObjectFile *objfile = module->GetObjectFile();
if (objfile)
{
Address so_addr(address, objfile->GetSectionList());
addr_t load_address = so_addr.GetLoadAddress (exe_ctx->GetTargetPtr());
bool process_launched_and_stopped = exe_ctx->GetProcessPtr()
? StateIsStoppedState(exe_ctx->GetProcessPtr()->GetState(), true /* must_exist */)
: false;
// Don't use the load address if the process has exited.
if (load_address != LLDB_INVALID_ADDRESS && process_launched_and_stopped)
{
resolved = true;
address = load_address;
address_type = eAddressTypeLoad;
data.SetByteOrder(exe_ctx->GetTargetRef().GetArchitecture().GetByteOrder());
data.SetAddressByteSize(exe_ctx->GetTargetRef().GetArchitecture().GetAddressByteSize());
}
else
{
if (so_addr.IsSectionOffset())
{
resolved = true;
file_so_addr = so_addr;
data.SetByteOrder(objfile->GetByteOrder());
data.SetAddressByteSize(objfile->GetAddressByteSize());
}
}
}
if (!resolved)
{
Variable *variable = GetVariable();
if (module)
{
if (variable)
error.SetErrorStringWithFormat ("unable to resolve the module for file address 0x%" PRIx64 " for variable '%s' in %s",
address,
variable->GetName().AsCString(""),
module->GetFileSpec().GetPath().c_str());
else
error.SetErrorStringWithFormat ("unable to resolve the module for file address 0x%" PRIx64 " in %s",
address,
module->GetFileSpec().GetPath().c_str());
}
else
{
if (variable)
error.SetErrorStringWithFormat ("unable to resolve the module for file address 0x%" PRIx64 " for variable '%s'",
address,
variable->GetName().AsCString(""));
else
error.SetErrorStringWithFormat ("unable to resolve the module for file address 0x%" PRIx64, address);
}
}
}
else
{
// Can't convert a file address to anything valid without more
// context (which Module it came from)
error.SetErrorString ("can't read memory from file address without more context");
}
}
}
break;
case eValueTypeHostAddress:
address = m_value.ULongLong(LLDB_INVALID_ADDRESS);
address_type = eAddressTypeHost;
if (exe_ctx)
{
Target *target = exe_ctx->GetTargetPtr();
if (target)
{
data.SetByteOrder(target->GetArchitecture().GetByteOrder());
data.SetAddressByteSize(target->GetArchitecture().GetAddressByteSize());
break;
}
}
// fallback to host settings
data.SetByteOrder(endian::InlHostByteOrder());
data.SetAddressByteSize(sizeof(void *));
break;
}
// Bail if we encountered any errors
if (error.Fail())
return error;
if (address == LLDB_INVALID_ADDRESS)
{
error.SetErrorStringWithFormat ("invalid %s address", address_type == eAddressTypeHost ? "host" : "load");
return error;
}
// If we got here, we need to read the value from memory
size_t byte_size = GetValueByteSize (&error, exe_ctx);
// Bail if we encountered any errors getting the byte size
if (error.Fail())
return error;
// Make sure we have enough room within "data", and if we don't make
// something large enough that does
if (!data.ValidOffsetForDataOfSize (data_offset, byte_size))
{
DataBufferSP data_sp(new DataBufferHeap (data_offset + byte_size, '\0'));
data.SetData(data_sp);
}
uint8_t* dst = const_cast<uint8_t*>(data.PeekData (data_offset, byte_size));
if (dst != NULL)
{
if (address_type == eAddressTypeHost)
{
// The address is an address in this process, so just copy it.
if (address == 0)
{
error.SetErrorStringWithFormat("trying to read from host address of 0.");
return error;
}
memcpy (dst, (uint8_t*)NULL + address, byte_size);
}
else if ((address_type == eAddressTypeLoad) || (address_type == eAddressTypeFile))
{
if (file_so_addr.IsValid())
{
// We have a file address that we were able to translate into a
// section offset address so we might be able to read this from
// the object files if we don't have a live process. Lets always
// try and read from the process if we have one though since we
// want to read the actual value by setting "prefer_file_cache"
// to false.
const bool prefer_file_cache = false;
if (exe_ctx->GetTargetRef().ReadMemory(file_so_addr, prefer_file_cache, dst, byte_size, error) != byte_size)
{
error.SetErrorStringWithFormat("read memory from 0x%" PRIx64 " failed", (uint64_t)address);
}
}
else
{
// The execution context might have a NULL process, but it
// might have a valid process in the exe_ctx->target, so use
// the ExecutionContext::GetProcess accessor to ensure we
// get the process if there is one.
Process *process = exe_ctx->GetProcessPtr();
if (process)
{
const size_t bytes_read = process->ReadMemory(address, dst, byte_size, error);
if (bytes_read != byte_size)
error.SetErrorStringWithFormat("read memory from 0x%" PRIx64 " failed (%u of %u bytes read)",
(uint64_t)address,
(uint32_t)bytes_read,
(uint32_t)byte_size);
}
else
{
error.SetErrorStringWithFormat("read memory from 0x%" PRIx64 " failed (invalid process)", (uint64_t)address);
}
}
}
else
{
error.SetErrorStringWithFormat ("unsupported AddressType value (%i)", address_type);
}
}
else
{
error.SetErrorStringWithFormat ("out of memory");
}
return error;
}
bool CommunicationKDP::SendRequestAndGetReply(
const CommandType command, const PacketStreamType &request_packet,
DataExtractor &reply_packet) {
if (IsRunning()) {
Log *log(ProcessKDPLog::GetLogIfAllCategoriesSet(KDP_LOG_PACKETS));
if (log) {
PacketStreamType log_strm;
DumpPacket(log_strm, request_packet.GetData(), request_packet.GetSize());
log->Printf("error: kdp running, not sending packet: %.*s",
(uint32_t)log_strm.GetSize(), log_strm.GetData());
}
return false;
}
std::lock_guard<std::recursive_mutex> guard(m_sequence_mutex);
#ifdef LLDB_CONFIGURATION_DEBUG
// NOTE: this only works for packets that are in native endian byte order
assert(request_packet.GetSize() ==
*((const uint16_t *)(request_packet.GetData() + 2)));
#endif
lldb::offset_t offset = 1;
const uint32_t num_retries = 3;
for (uint32_t i = 0; i < num_retries; ++i) {
if (SendRequestPacketNoLock(request_packet)) {
const uint8_t request_sequence_id = (uint8_t)request_packet.GetData()[1];
while (1) {
if (WaitForPacketWithTimeoutMicroSecondsNoLock(
reply_packet,
std::chrono::microseconds(GetPacketTimeout()).count())) {
offset = 0;
const uint8_t reply_command = reply_packet.GetU8(&offset);
const uint8_t reply_sequence_id = reply_packet.GetU8(&offset);
if (request_sequence_id == reply_sequence_id) {
// The sequent ID was correct, now verify we got the response we
// were looking for
if ((reply_command & eCommandTypeMask) == command) {
// Success
if (command == KDP_RESUMECPUS)
m_is_running.SetValue(true, eBroadcastAlways);
return true;
} else {
// Failed to get the correct response, bail
reply_packet.Clear();
return false;
}
} else if (reply_sequence_id > request_sequence_id) {
// Sequence ID was greater than the sequence ID of the packet we
// sent, something is really wrong...
reply_packet.Clear();
return false;
} else {
// The reply sequence ID was less than our current packet's
// sequence ID so we should keep trying to get a response because
// this was a response for a previous packet that we must have
// retried.
}
} else {
// Break and retry sending the packet as we didn't get a response due
// to timeout
break;
}
}
}
}
reply_packet.Clear();
return false;
}
bool CommunicationKDP::CheckForPacket(const uint8_t *src, size_t src_len,
DataExtractor &packet) {
// Put the packet data into the buffer in a thread safe fashion
std::lock_guard<std::recursive_mutex> guard(m_bytes_mutex);
Log *log(ProcessKDPLog::GetLogIfAllCategoriesSet(KDP_LOG_PACKETS));
if (src && src_len > 0) {
if (log && log->GetVerbose()) {
PacketStreamType log_strm;
DumpHexBytes(&log_strm, src, src_len, UINT32_MAX, LLDB_INVALID_ADDRESS);
log->Printf("CommunicationKDP::%s adding %u bytes: %s", __FUNCTION__,
(uint32_t)src_len, log_strm.GetData());
}
m_bytes.append((const char *)src, src_len);
}
// Make sure we at least have enough bytes for a packet header
const size_t bytes_available = m_bytes.size();
if (bytes_available >= 8) {
packet.SetData(&m_bytes[0], bytes_available, m_byte_order);
lldb::offset_t offset = 0;
uint8_t reply_command = packet.GetU8(&offset);
switch (reply_command) {
case ePacketTypeRequest | KDP_EXCEPTION:
case ePacketTypeRequest | KDP_TERMINATION:
// We got an exception request, so be sure to send an ACK
{
PacketStreamType request_ack_packet(Stream::eBinary, m_addr_byte_size,
m_byte_order);
// Set the reply but and make the ACK packet
request_ack_packet.PutHex8(reply_command | ePacketTypeReply);
request_ack_packet.PutHex8(packet.GetU8(&offset));
request_ack_packet.PutHex16(packet.GetU16(&offset));
request_ack_packet.PutHex32(packet.GetU32(&offset));
m_is_running.SetValue(false, eBroadcastAlways);
// Ack to the exception or termination
SendRequestPacketNoLock(request_ack_packet);
}
// Fall through to case below to get packet contents
LLVM_FALLTHROUGH;
case ePacketTypeReply | KDP_CONNECT:
case ePacketTypeReply | KDP_DISCONNECT:
case ePacketTypeReply | KDP_HOSTINFO:
case ePacketTypeReply | KDP_VERSION:
case ePacketTypeReply | KDP_MAXBYTES:
case ePacketTypeReply | KDP_READMEM:
case ePacketTypeReply | KDP_WRITEMEM:
case ePacketTypeReply | KDP_READREGS:
case ePacketTypeReply | KDP_WRITEREGS:
case ePacketTypeReply | KDP_LOAD:
case ePacketTypeReply | KDP_IMAGEPATH:
case ePacketTypeReply | KDP_SUSPEND:
case ePacketTypeReply | KDP_RESUMECPUS:
case ePacketTypeReply | KDP_BREAKPOINT_SET:
case ePacketTypeReply | KDP_BREAKPOINT_REMOVE:
case ePacketTypeReply | KDP_REGIONS:
case ePacketTypeReply | KDP_REATTACH:
case ePacketTypeReply | KDP_HOSTREBOOT:
case ePacketTypeReply | KDP_READMEM64:
case ePacketTypeReply | KDP_WRITEMEM64:
case ePacketTypeReply | KDP_BREAKPOINT_SET64:
case ePacketTypeReply | KDP_BREAKPOINT_REMOVE64:
case ePacketTypeReply | KDP_KERNELVERSION:
case ePacketTypeReply | KDP_READPHYSMEM64:
case ePacketTypeReply | KDP_WRITEPHYSMEM64:
case ePacketTypeReply | KDP_READIOPORT:
case ePacketTypeReply | KDP_WRITEIOPORT:
case ePacketTypeReply | KDP_READMSR64:
case ePacketTypeReply | KDP_WRITEMSR64:
case ePacketTypeReply | KDP_DUMPINFO: {
offset = 2;
const uint16_t length = packet.GetU16(&offset);
if (length <= bytes_available) {
// We have an entire packet ready, we need to copy the data bytes into
// a buffer that will be owned by the packet and erase the bytes from
// our communcation buffer "m_bytes"
packet.SetData(DataBufferSP(new DataBufferHeap(&m_bytes[0], length)));
m_bytes.erase(0, length);
if (log) {
PacketStreamType log_strm;
DumpPacket(log_strm, packet);
log->Printf("%.*s", (uint32_t)log_strm.GetSize(), log_strm.GetData());
}
return true;
}
} break;
default:
// Unrecognized reply command byte, erase this byte and try to get back
// on track
if (log)
log->Printf("CommunicationKDP::%s: tossing junk byte: 0x%2.2x",
__FUNCTION__, (uint8_t)m_bytes[0]);
m_bytes.erase(0, 1);
break;
}
}
packet.Clear();
return false;
}
Error
Value::GetValueAsData (ExecutionContext *exe_ctx,
clang::ASTContext *ast_context,
DataExtractor &data,
uint32_t data_offset,
Module *module)
{
data.Clear();
Error error;
lldb::addr_t address = LLDB_INVALID_ADDRESS;
AddressType address_type = eAddressTypeFile;
Address file_so_addr;
switch (m_value_type)
{
default:
error.SetErrorStringWithFormat("invalid value type %i", m_value_type);
break;
case eValueTypeScalar:
data.SetByteOrder (lldb::endian::InlHostByteOrder());
if (m_context_type == eContextTypeClangType && ast_context)
{
uint32_t ptr_bit_width = ClangASTType::GetClangTypeBitWidth (ast_context,
ClangASTContext::GetVoidPtrType(ast_context, false));
uint32_t ptr_byte_size = (ptr_bit_width + 7) / 8;
data.SetAddressByteSize (ptr_byte_size);
}
else
data.SetAddressByteSize(sizeof(void *));
if (m_value.GetData (data))
return error; // Success;
error.SetErrorStringWithFormat("extracting data from value failed");
break;
case eValueTypeLoadAddress:
if (exe_ctx == NULL)
{
error.SetErrorString ("can't read load address (no execution context)");
}
else
{
Process *process = exe_ctx->GetProcessPtr();
if (process == NULL)
{
error.SetErrorString ("can't read load address (invalid process)");
}
else
{
address = m_value.ULongLong(LLDB_INVALID_ADDRESS);
address_type = eAddressTypeLoad;
data.SetByteOrder(process->GetTarget().GetArchitecture().GetByteOrder());
data.SetAddressByteSize(process->GetTarget().GetArchitecture().GetAddressByteSize());
}
}
break;
case eValueTypeFileAddress:
if (exe_ctx == NULL)
{
error.SetErrorString ("can't read file address (no execution context)");
}
else if (exe_ctx->GetTargetPtr() == NULL)
{
error.SetErrorString ("can't read file address (invalid target)");
}
else
{
address = m_value.ULongLong(LLDB_INVALID_ADDRESS);
if (address == LLDB_INVALID_ADDRESS)
{
error.SetErrorString ("invalid file address");
}
else
{
if (module == NULL)
{
// The only thing we can currently lock down to a module so that
// we can resolve a file address, is a variable.
Variable *variable = GetVariable();
if (variable)
{
SymbolContext var_sc;
variable->CalculateSymbolContext(&var_sc);
module = var_sc.module_sp.get();
}
}
if (module)
{
bool resolved = false;
ObjectFile *objfile = module->GetObjectFile();
if (objfile)
{
Address so_addr(address, objfile->GetSectionList());
addr_t load_address = so_addr.GetLoadAddress (exe_ctx->GetTargetPtr());
bool process_launched_and_stopped = exe_ctx->GetProcessPtr()
? StateIsStoppedState(exe_ctx->GetProcessPtr()->GetState(), true /* must_exist */)
: false;
// Don't use the load address if the process has exited.
if (load_address != LLDB_INVALID_ADDRESS && process_launched_and_stopped)
{
resolved = true;
address = load_address;
address_type = eAddressTypeLoad;
data.SetByteOrder(exe_ctx->GetTargetRef().GetArchitecture().GetByteOrder());
data.SetAddressByteSize(exe_ctx->GetTargetRef().GetArchitecture().GetAddressByteSize());
}
else
{
if (so_addr.IsSectionOffset())
{
resolved = true;
file_so_addr = so_addr;
data.SetByteOrder(objfile->GetByteOrder());
data.SetAddressByteSize(objfile->GetAddressByteSize());
}
}
}
if (!resolved)
{
Variable *variable = GetVariable();
if (module)
{
if (variable)
error.SetErrorStringWithFormat ("unable to resolve the module for file address 0x%llx for variable '%s' in %s%s%s",
address,
variable->GetName().AsCString(""),
module->GetFileSpec().GetDirectory().GetCString(),
module->GetFileSpec().GetDirectory() ? "/" : "",
module->GetFileSpec().GetFilename().GetCString());
else
error.SetErrorStringWithFormat ("unable to resolve the module for file address 0x%llx in %s%s%s",
address,
module->GetFileSpec().GetDirectory().GetCString(),
module->GetFileSpec().GetDirectory() ? "/" : "",
module->GetFileSpec().GetFilename().GetCString());
}
else
{
if (variable)
error.SetErrorStringWithFormat ("unable to resolve the module for file address 0x%llx for variable '%s'",
address,
variable->GetName().AsCString(""));
else
error.SetErrorStringWithFormat ("unable to resolve the module for file address 0x%llx", address);
}
}
}
else
{
// Can't convert a file address to anything valid without more
// context (which Module it came from)
error.SetErrorString ("can't read memory from file address without more context");
}
}
}
break;
case eValueTypeHostAddress:
address = m_value.ULongLong(LLDB_INVALID_ADDRESS);
address_type = eAddressTypeHost;
if (exe_ctx)
{
Target *target = exe_ctx->GetTargetPtr();
if (target)
{
data.SetByteOrder(target->GetArchitecture().GetByteOrder());
data.SetAddressByteSize(target->GetArchitecture().GetAddressByteSize());
break;
}
}
// fallback to host settings
data.SetByteOrder(lldb::endian::InlHostByteOrder());
data.SetAddressByteSize(sizeof(void *));
break;
}
// Bail if we encountered any errors
if (error.Fail())
return error;
if (address == LLDB_INVALID_ADDRESS)
{
error.SetErrorStringWithFormat ("invalid %s address", address_type == eAddressTypeHost ? "host" : "load");
return error;
}
// If we got here, we need to read the value from memory
uint32_t byte_size = GetValueByteSize (ast_context, &error);
// Bail if we encountered any errors getting the byte size
if (error.Fail())
return error;
// Make sure we have enough room within "data", and if we don't make
// something large enough that does
if (!data.ValidOffsetForDataOfSize (data_offset, byte_size))
{
DataBufferSP data_sp(new DataBufferHeap (data_offset + byte_size, '\0'));
data.SetData(data_sp);
}
uint8_t* dst = const_cast<uint8_t*>(data.PeekData (data_offset, byte_size));
if (dst != NULL)
{
if (address_type == eAddressTypeHost)
{
// The address is an address in this process, so just copy it
memcpy (dst, (uint8_t*)NULL + address, byte_size);
}
else if ((address_type == eAddressTypeLoad) || (address_type == eAddressTypeFile))
{
if (file_so_addr.IsValid())
{
// We have a file address that we were able to translate into a
// section offset address so we might be able to read this from
// the object files if we don't have a live process. Lets always
// try and read from the process if we have one though since we
// want to read the actual value by setting "prefer_file_cache"
// to false.
const bool prefer_file_cache = false;
if (exe_ctx->GetTargetRef().ReadMemory(file_so_addr, prefer_file_cache, dst, byte_size, error) != byte_size)
{
error.SetErrorStringWithFormat("read memory from 0x%llx failed", (uint64_t)address);
}
}
else
{
// The execution context might have a NULL process, but it
// might have a valid process in the exe_ctx->target, so use
// the ExecutionContext::GetProcess accessor to ensure we
// get the process if there is one.
Process *process = exe_ctx->GetProcessPtr();
if (process)
{
const size_t bytes_read = process->ReadMemory(address, dst, byte_size, error);
if (bytes_read != byte_size)
error.SetErrorStringWithFormat("read memory from 0x%llx failed (%u of %u bytes read)",
(uint64_t)address,
(uint32_t)bytes_read,
(uint32_t)byte_size);
}
else
{
error.SetErrorStringWithFormat("read memory from 0x%llx failed (invalid process)", (uint64_t)address);
}
}
}
else
{
error.SetErrorStringWithFormat ("unsupported AddressType value (%i)", address_type);
}
}
else
{
error.SetErrorStringWithFormat ("out of memory");
}
return error;
}
