bool AMDGPUCodeGenPrepare::visitLoadInst(LoadInst &I) {
if (!WidenLoads)
return false;
if ((I.getPointerAddressSpace() == AMDGPUASI.CONSTANT_ADDRESS ||
I.getPointerAddressSpace() == AMDGPUASI.CONSTANT_ADDRESS_32BIT) &&
canWidenScalarExtLoad(I)) {
IRBuilder<> Builder(&I);
Builder.SetCurrentDebugLocation(I.getDebugLoc());
Type *I32Ty = Builder.getInt32Ty();
Type *PT = PointerType::get(I32Ty, I.getPointerAddressSpace());
Value *BitCast= Builder.CreateBitCast(I.getPointerOperand(), PT);
LoadInst *WidenLoad = Builder.CreateLoad(BitCast);
WidenLoad->copyMetadata(I);
// If we have range metadata, we need to convert the type, and not make
// assumptions about the high bits.
if (auto *Range = WidenLoad->getMetadata(LLVMContext::MD_range)) {
ConstantInt *Lower =
mdconst::extract<ConstantInt>(Range->getOperand(0));
if (Lower->getValue().isNullValue()) {
WidenLoad->setMetadata(LLVMContext::MD_range, nullptr);
} else {
Metadata *LowAndHigh[] = {
ConstantAsMetadata::get(ConstantInt::get(I32Ty, Lower->getValue().zext(32))),
// Don't make assumptions about the high bits.
ConstantAsMetadata::get(ConstantInt::get(I32Ty, 0))
};
WidenLoad->setMetadata(LLVMContext::MD_range,
MDNode::get(Mod->getContext(), LowAndHigh));
}
}
int TySize = Mod->getDataLayout().getTypeSizeInBits(I.getType());
Type *IntNTy = Builder.getIntNTy(TySize);
Value *ValTrunc = Builder.CreateTrunc(WidenLoad, IntNTy);
Value *ValOrig = Builder.CreateBitCast(ValTrunc, I.getType());
I.replaceAllUsesWith(ValOrig);
I.eraseFromParent();
return true;
}
return false;
}
/// DoPromotion - This method actually performs the promotion of the specified
/// arguments, and returns the new function. At this point, we know that it's
/// safe to do so.
CallGraphNode *ArgPromotion::DoPromotion(Function *F,
SmallPtrSet<Argument*, 8> &ArgsToPromote,
SmallPtrSet<Argument*, 8> &ByValArgsToTransform) {
// Start by computing a new prototype for the function, which is the same as
// the old function, but has modified arguments.
const FunctionType *FTy = F->getFunctionType();
std::vector<const Type*> Params;
typedef std::set<IndicesVector> ScalarizeTable;
// ScalarizedElements - If we are promoting a pointer that has elements
// accessed out of it, keep track of which elements are accessed so that we
// can add one argument for each.
//
// Arguments that are directly loaded will have a zero element value here, to
// handle cases where there are both a direct load and GEP accesses.
//
std::map<Argument*, ScalarizeTable> ScalarizedElements;
// OriginalLoads - Keep track of a representative load instruction from the
// original function so that we can tell the alias analysis implementation
// what the new GEP/Load instructions we are inserting look like.
std::map<IndicesVector, LoadInst*> OriginalLoads;
// Attributes - Keep track of the parameter attributes for the arguments
// that we are *not* promoting. For the ones that we do promote, the parameter
// attributes are lost
SmallVector<AttributeWithIndex, 8> AttributesVec;
const AttrListPtr &PAL = F->getAttributes();
// Add any return attributes.
if (Attributes attrs = PAL.getRetAttributes())
AttributesVec.push_back(AttributeWithIndex::get(0, attrs));
// First, determine the new argument list
unsigned ArgIndex = 1;
for (Function::arg_iterator I = F->arg_begin(), E = F->arg_end(); I != E;
++I, ++ArgIndex) {
if (ByValArgsToTransform.count(I)) {
// Simple byval argument? Just add all the struct element types.
const Type *AgTy = cast<PointerType>(I->getType())->getElementType();
const StructType *STy = cast<StructType>(AgTy);
for (unsigned i = 0, e = STy->getNumElements(); i != e; ++i)
Params.push_back(STy->getElementType(i));
++NumByValArgsPromoted;
} else if (!ArgsToPromote.count(I)) {
// Unchanged argument
Params.push_back(I->getType());
if (Attributes attrs = PAL.getParamAttributes(ArgIndex))
AttributesVec.push_back(AttributeWithIndex::get(Params.size(), attrs));
} else if (I->use_empty()) {
// Dead argument (which are always marked as promotable)
++NumArgumentsDead;
} else {
// Okay, this is being promoted. This means that the only uses are loads
// or GEPs which are only used by loads
// In this table, we will track which indices are loaded from the argument
// (where direct loads are tracked as no indices).
ScalarizeTable &ArgIndices = ScalarizedElements[I];
for (Value::use_iterator UI = I->use_begin(), E = I->use_end(); UI != E;
++UI) {
Instruction *User = cast<Instruction>(*UI);
assert(isa<LoadInst>(User) || isa<GetElementPtrInst>(User));
IndicesVector Indices;
Indices.reserve(User->getNumOperands() - 1);
// Since loads will only have a single operand, and GEPs only a single
// non-index operand, this will record direct loads without any indices,
// and gep+loads with the GEP indices.
for (User::op_iterator II = User->op_begin() + 1, IE = User->op_end();
II != IE; ++II)
Indices.push_back(cast<ConstantInt>(*II)->getSExtValue());
// GEPs with a single 0 index can be merged with direct loads
if (Indices.size() == 1 && Indices.front() == 0)
Indices.clear();
ArgIndices.insert(Indices);
LoadInst *OrigLoad;
if (LoadInst *L = dyn_cast<LoadInst>(User))
OrigLoad = L;
else
// Take any load, we will use it only to update Alias Analysis
OrigLoad = cast<LoadInst>(User->use_back());
OriginalLoads[Indices] = OrigLoad;
}
// Add a parameter to the function for each element passed in.
for (ScalarizeTable::iterator SI = ArgIndices.begin(),
E = ArgIndices.end(); SI != E; ++SI) {
// not allowed to dereference ->begin() if size() is 0
Params.push_back(GetElementPtrInst::getIndexedType(I->getType(),
SI->begin(),
SI->end()));
assert(Params.back());
}
if (ArgIndices.size() == 1 && ArgIndices.begin()->empty())
++NumArgumentsPromoted;
else
++NumAggregatesPromoted;
}
}
// Add any function attributes.
if (Attributes attrs = PAL.getFnAttributes())
AttributesVec.push_back(AttributeWithIndex::get(~0, attrs));
const Type *RetTy = FTy->getReturnType();
// Work around LLVM bug PR56: the CWriter cannot emit varargs functions which
// have zero fixed arguments.
bool ExtraArgHack = false;
if (Params.empty() && FTy->isVarArg()) {
ExtraArgHack = true;
Params.push_back(Type::getInt32Ty(F->getContext()));
}
// Construct the new function type using the new arguments.
FunctionType *NFTy = FunctionType::get(RetTy, Params, FTy->isVarArg());
// Create the new function body and insert it into the module.
Function *NF = Function::Create(NFTy, F->getLinkage(), F->getName());
NF->copyAttributesFrom(F);
DEBUG(dbgs() << "ARG PROMOTION: Promoting to:" << *NF << "\n"
<< "From: " << *F);
// Recompute the parameter attributes list based on the new arguments for
// the function.
NF->setAttributes(AttrListPtr::get(AttributesVec.begin(),
AttributesVec.end()));
AttributesVec.clear();
F->getParent()->getFunctionList().insert(F, NF);
NF->takeName(F);
// Get the alias analysis information that we need to update to reflect our
// changes.
AliasAnalysis &AA = getAnalysis<AliasAnalysis>();
// Get the callgraph information that we need to update to reflect our
// changes.
CallGraph &CG = getAnalysis<CallGraph>();
// Get a new callgraph node for NF.
CallGraphNode *NF_CGN = CG.getOrInsertFunction(NF);
// Loop over all of the callers of the function, transforming the call sites
// to pass in the loaded pointers.
//
SmallVector<Value*, 16> Args;
while (!F->use_empty()) {
CallSite CS(F->use_back());
assert(CS.getCalledFunction() == F);
Instruction *Call = CS.getInstruction();
const AttrListPtr &CallPAL = CS.getAttributes();
// Add any return attributes.
if (Attributes attrs = CallPAL.getRetAttributes())
AttributesVec.push_back(AttributeWithIndex::get(0, attrs));
// Loop over the operands, inserting GEP and loads in the caller as
// appropriate.
CallSite::arg_iterator AI = CS.arg_begin();
ArgIndex = 1;
for (Function::arg_iterator I = F->arg_begin(), E = F->arg_end();
I != E; ++I, ++AI, ++ArgIndex)
if (!ArgsToPromote.count(I) && !ByValArgsToTransform.count(I)) {
Args.push_back(*AI); // Unmodified argument
if (Attributes Attrs = CallPAL.getParamAttributes(ArgIndex))
AttributesVec.push_back(AttributeWithIndex::get(Args.size(), Attrs));
} else if (ByValArgsToTransform.count(I)) {
// Emit a GEP and load for each element of the struct.
const Type *AgTy = cast<PointerType>(I->getType())->getElementType();
const StructType *STy = cast<StructType>(AgTy);
Value *Idxs[2] = {
ConstantInt::get(Type::getInt32Ty(F->getContext()), 0), 0 };
for (unsigned i = 0, e = STy->getNumElements(); i != e; ++i) {
Idxs[1] = ConstantInt::get(Type::getInt32Ty(F->getContext()), i);
Value *Idx = GetElementPtrInst::Create(*AI, Idxs, Idxs+2,
(*AI)->getName()+"."+utostr(i),
Call);
// TODO: Tell AA about the new values?
Args.push_back(new LoadInst(Idx, Idx->getName()+".val", Call));
}
} else if (!I->use_empty()) {
// Non-dead argument: insert GEPs and loads as appropriate.
ScalarizeTable &ArgIndices = ScalarizedElements[I];
// Store the Value* version of the indices in here, but declare it now
// for reuse.
std::vector<Value*> Ops;
for (ScalarizeTable::iterator SI = ArgIndices.begin(),
E = ArgIndices.end(); SI != E; ++SI) {
Value *V = *AI;
LoadInst *OrigLoad = OriginalLoads[*SI];
if (!SI->empty()) {
Ops.reserve(SI->size());
const Type *ElTy = V->getType();
for (IndicesVector::const_iterator II = SI->begin(),
IE = SI->end(); II != IE; ++II) {
// Use i32 to index structs, and i64 for others (pointers/arrays).
// This satisfies GEP constraints.
const Type *IdxTy = (ElTy->isStructTy() ?
Type::getInt32Ty(F->getContext()) :
Type::getInt64Ty(F->getContext()));
Ops.push_back(ConstantInt::get(IdxTy, *II));
// Keep track of the type we're currently indexing.
ElTy = cast<CompositeType>(ElTy)->getTypeAtIndex(*II);
}
// And create a GEP to extract those indices.
V = GetElementPtrInst::Create(V, Ops.begin(), Ops.end(),
V->getName()+".idx", Call);
Ops.clear();
AA.copyValue(OrigLoad->getOperand(0), V);
}
// Since we're replacing a load make sure we take the alignment
// of the previous load.
LoadInst *newLoad = new LoadInst(V, V->getName()+".val", Call);
newLoad->setAlignment(OrigLoad->getAlignment());
// Transfer the TBAA info too.
newLoad->setMetadata(LLVMContext::MD_tbaa,
OrigLoad->getMetadata(LLVMContext::MD_tbaa));
Args.push_back(newLoad);
AA.copyValue(OrigLoad, Args.back());
}
}
if (ExtraArgHack)
Args.push_back(Constant::getNullValue(Type::getInt32Ty(F->getContext())));
// Push any varargs arguments on the list.
for (; AI != CS.arg_end(); ++AI, ++ArgIndex) {
Args.push_back(*AI);
if (Attributes Attrs = CallPAL.getParamAttributes(ArgIndex))
AttributesVec.push_back(AttributeWithIndex::get(Args.size(), Attrs));
}
// Add any function attributes.
if (Attributes attrs = CallPAL.getFnAttributes())
AttributesVec.push_back(AttributeWithIndex::get(~0, attrs));
Instruction *New;
if (InvokeInst *II = dyn_cast<InvokeInst>(Call)) {
New = InvokeInst::Create(NF, II->getNormalDest(), II->getUnwindDest(),
Args.begin(), Args.end(), "", Call);
cast<InvokeInst>(New)->setCallingConv(CS.getCallingConv());
cast<InvokeInst>(New)->setAttributes(AttrListPtr::get(AttributesVec.begin(),
AttributesVec.end()));
} else {
New = CallInst::Create(NF, Args.begin(), Args.end(), "", Call);
cast<CallInst>(New)->setCallingConv(CS.getCallingConv());
cast<CallInst>(New)->setAttributes(AttrListPtr::get(AttributesVec.begin(),
AttributesVec.end()));
if (cast<CallInst>(Call)->isTailCall())
cast<CallInst>(New)->setTailCall();
}
Args.clear();
AttributesVec.clear();
// Update the alias analysis implementation to know that we are replacing
// the old call with a new one.
AA.replaceWithNewValue(Call, New);
// Update the callgraph to know that the callsite has been transformed.
CallGraphNode *CalleeNode = CG[Call->getParent()->getParent()];
CalleeNode->replaceCallEdge(Call, New, NF_CGN);
if (!Call->use_empty()) {
Call->replaceAllUsesWith(New);
New->takeName(Call);
}
// Finally, remove the old call from the program, reducing the use-count of
// F.
Call->eraseFromParent();
}
// Since we have now created the new function, splice the body of the old
// function right into the new function, leaving the old rotting hulk of the
// function empty.
NF->getBasicBlockList().splice(NF->begin(), F->getBasicBlockList());
// Loop over the argument list, transferring uses of the old arguments over to
// the new arguments, also transferring over the names as well.
//
for (Function::arg_iterator I = F->arg_begin(), E = F->arg_end(),
I2 = NF->arg_begin(); I != E; ++I) {
if (!ArgsToPromote.count(I) && !ByValArgsToTransform.count(I)) {
// If this is an unmodified argument, move the name and users over to the
// new version.
I->replaceAllUsesWith(I2);
I2->takeName(I);
AA.replaceWithNewValue(I, I2);
++I2;
continue;
}
if (ByValArgsToTransform.count(I)) {
// In the callee, we create an alloca, and store each of the new incoming
// arguments into the alloca.
Instruction *InsertPt = NF->begin()->begin();
// Just add all the struct element types.
const Type *AgTy = cast<PointerType>(I->getType())->getElementType();
Value *TheAlloca = new AllocaInst(AgTy, 0, "", InsertPt);
const StructType *STy = cast<StructType>(AgTy);
Value *Idxs[2] = {
ConstantInt::get(Type::getInt32Ty(F->getContext()), 0), 0 };
for (unsigned i = 0, e = STy->getNumElements(); i != e; ++i) {
Idxs[1] = ConstantInt::get(Type::getInt32Ty(F->getContext()), i);
Value *Idx =
GetElementPtrInst::Create(TheAlloca, Idxs, Idxs+2,
TheAlloca->getName()+"."+Twine(i),
InsertPt);
I2->setName(I->getName()+"."+Twine(i));
new StoreInst(I2++, Idx, InsertPt);
}
// Anything that used the arg should now use the alloca.
I->replaceAllUsesWith(TheAlloca);
TheAlloca->takeName(I);
AA.replaceWithNewValue(I, TheAlloca);
continue;
}
if (I->use_empty()) {
AA.deleteValue(I);
continue;
}
// Otherwise, if we promoted this argument, then all users are load
// instructions (or GEPs with only load users), and all loads should be
// using the new argument that we added.
ScalarizeTable &ArgIndices = ScalarizedElements[I];
while (!I->use_empty()) {
if (LoadInst *LI = dyn_cast<LoadInst>(I->use_back())) {
assert(ArgIndices.begin()->empty() &&
"Load element should sort to front!");
I2->setName(I->getName()+".val");
LI->replaceAllUsesWith(I2);
AA.replaceWithNewValue(LI, I2);
LI->eraseFromParent();
DEBUG(dbgs() << "*** Promoted load of argument '" << I->getName()
<< "' in function '" << F->getName() << "'\n");
} else {
GetElementPtrInst *GEP = cast<GetElementPtrInst>(I->use_back());
IndicesVector Operands;
Operands.reserve(GEP->getNumIndices());
for (User::op_iterator II = GEP->idx_begin(), IE = GEP->idx_end();
II != IE; ++II)
Operands.push_back(cast<ConstantInt>(*II)->getSExtValue());
// GEPs with a single 0 index can be merged with direct loads
if (Operands.size() == 1 && Operands.front() == 0)
Operands.clear();
Function::arg_iterator TheArg = I2;
for (ScalarizeTable::iterator It = ArgIndices.begin();
*It != Operands; ++It, ++TheArg) {
assert(It != ArgIndices.end() && "GEP not handled??");
}
std::string NewName = I->getName();
for (unsigned i = 0, e = Operands.size(); i != e; ++i) {
NewName += "." + utostr(Operands[i]);
}
NewName += ".val";
TheArg->setName(NewName);
DEBUG(dbgs() << "*** Promoted agg argument '" << TheArg->getName()
<< "' of function '" << NF->getName() << "'\n");
// All of the uses must be load instructions. Replace them all with
// the argument specified by ArgNo.
while (!GEP->use_empty()) {
LoadInst *L = cast<LoadInst>(GEP->use_back());
L->replaceAllUsesWith(TheArg);
AA.replaceWithNewValue(L, TheArg);
L->eraseFromParent();
}
AA.deleteValue(GEP);
GEP->eraseFromParent();
}
}
// Increment I2 past all of the arguments added for this promoted pointer.
for (unsigned i = 0, e = ArgIndices.size(); i != e; ++i)
++I2;
}
// Notify the alias analysis implementation that we inserted a new argument.
if (ExtraArgHack)
AA.copyValue(Constant::getNullValue(Type::getInt32Ty(F->getContext())),
NF->arg_begin());
// Tell the alias analysis that the old function is about to disappear.
AA.replaceWithNewValue(F, NF);
NF_CGN->stealCalledFunctionsFrom(CG[F]);
// Now that the old function is dead, delete it. If there is a dangling
// reference to the CallgraphNode, just leave the dead function around for
// someone else to nuke.
CallGraphNode *CGN = CG[F];
if (CGN->getNumReferences() == 0)
delete CG.removeFunctionFromModule(CGN);
else
F->setLinkage(Function::ExternalLinkage);
return NF_CGN;
}
/// Many allocas are only used within a single basic block. If this is the
/// case, avoid traversing the CFG and inserting a lot of potentially useless
/// PHI nodes by just performing a single linear pass over the basic block
/// using the Alloca.
///
/// If we cannot promote this alloca (because it is read before it is written),
/// return false. This is necessary in cases where, due to control flow, the
/// alloca is undefined only on some control flow paths. e.g. code like
/// this is correct in LLVM IR:
/// // A is an alloca with no stores so far
/// for (...) {
/// int t = *A;
/// if (!first_iteration)
/// use(t);
/// *A = 42;
/// }
static bool promoteSingleBlockAlloca(AllocaInst *AI, const AllocaInfo &Info,
LargeBlockInfo &LBI,
const DataLayout &DL,
DominatorTree &DT,
AssumptionCache *AC) {
// The trickiest case to handle is when we have large blocks. Because of this,
// this code is optimized assuming that large blocks happen. This does not
// significantly pessimize the small block case. This uses LargeBlockInfo to
// make it efficient to get the index of various operations in the block.
// Walk the use-def list of the alloca, getting the locations of all stores.
using StoresByIndexTy = SmallVector<std::pair<unsigned, StoreInst *>, 64>;
StoresByIndexTy StoresByIndex;
for (User *U : AI->users())
if (StoreInst *SI = dyn_cast<StoreInst>(U))
StoresByIndex.push_back(std::make_pair(LBI.getInstructionIndex(SI), SI));
// Sort the stores by their index, making it efficient to do a lookup with a
// binary search.
llvm::sort(StoresByIndex, less_first());
// Walk all of the loads from this alloca, replacing them with the nearest
// store above them, if any.
for (auto UI = AI->user_begin(), E = AI->user_end(); UI != E;) {
LoadInst *LI = dyn_cast<LoadInst>(*UI++);
if (!LI)
continue;
unsigned LoadIdx = LBI.getInstructionIndex(LI);
// Find the nearest store that has a lower index than this load.
StoresByIndexTy::iterator I =
std::lower_bound(StoresByIndex.begin(), StoresByIndex.end(),
std::make_pair(LoadIdx,
static_cast<StoreInst *>(nullptr)),
less_first());
if (I == StoresByIndex.begin()) {
if (StoresByIndex.empty())
// If there are no stores, the load takes the undef value.
LI->replaceAllUsesWith(UndefValue::get(LI->getType()));
else
// There is no store before this load, bail out (load may be affected
// by the following stores - see main comment).
return false;
} else {
// Otherwise, there was a store before this load, the load takes its value.
// Note, if the load was marked as nonnull we don't want to lose that
// information when we erase it. So we preserve it with an assume.
Value *ReplVal = std::prev(I)->second->getOperand(0);
if (AC && LI->getMetadata(LLVMContext::MD_nonnull) &&
!isKnownNonZero(ReplVal, DL, 0, AC, LI, &DT))
addAssumeNonNull(AC, LI);
// If the replacement value is the load, this must occur in unreachable
// code.
if (ReplVal == LI)
ReplVal = UndefValue::get(LI->getType());
LI->replaceAllUsesWith(ReplVal);
}
LI->eraseFromParent();
LBI.deleteValue(LI);
}
// Remove the (now dead) stores and alloca.
while (!AI->use_empty()) {
StoreInst *SI = cast<StoreInst>(AI->user_back());
// Record debuginfo for the store before removing it.
for (DbgVariableIntrinsic *DII : Info.DbgDeclares) {
DIBuilder DIB(*AI->getModule(), /*AllowUnresolved*/ false);
ConvertDebugDeclareToDebugValue(DII, SI, DIB);
}
SI->eraseFromParent();
LBI.deleteValue(SI);
}
AI->eraseFromParent();
LBI.deleteValue(AI);
// The alloca's debuginfo can be removed as well.
for (DbgVariableIntrinsic *DII : Info.DbgDeclares) {
DII->eraseFromParent();
LBI.deleteValue(DII);
}
++NumLocalPromoted;
return true;
}
/// Rewrite as many loads as possible given a single store.
///
/// When there is only a single store, we can use the domtree to trivially
/// replace all of the dominated loads with the stored value. Do so, and return
/// true if this has successfully promoted the alloca entirely. If this returns
/// false there were some loads which were not dominated by the single store
/// and thus must be phi-ed with undef. We fall back to the standard alloca
/// promotion algorithm in that case.
static bool rewriteSingleStoreAlloca(AllocaInst *AI, AllocaInfo &Info,
LargeBlockInfo &LBI, const DataLayout &DL,
DominatorTree &DT, AssumptionCache *AC) {
StoreInst *OnlyStore = Info.OnlyStore;
bool StoringGlobalVal = !isa<Instruction>(OnlyStore->getOperand(0));
BasicBlock *StoreBB = OnlyStore->getParent();
int StoreIndex = -1;
// Clear out UsingBlocks. We will reconstruct it here if needed.
Info.UsingBlocks.clear();
for (auto UI = AI->user_begin(), E = AI->user_end(); UI != E;) {
Instruction *UserInst = cast<Instruction>(*UI++);
if (!isa<LoadInst>(UserInst)) {
assert(UserInst == OnlyStore && "Should only have load/stores");
continue;
}
LoadInst *LI = cast<LoadInst>(UserInst);
// Okay, if we have a load from the alloca, we want to replace it with the
// only value stored to the alloca. We can do this if the value is
// dominated by the store. If not, we use the rest of the mem2reg machinery
// to insert the phi nodes as needed.
if (!StoringGlobalVal) { // Non-instructions are always dominated.
if (LI->getParent() == StoreBB) {
// If we have a use that is in the same block as the store, compare the
// indices of the two instructions to see which one came first. If the
// load came before the store, we can't handle it.
if (StoreIndex == -1)
StoreIndex = LBI.getInstructionIndex(OnlyStore);
if (unsigned(StoreIndex) > LBI.getInstructionIndex(LI)) {
// Can't handle this load, bail out.
Info.UsingBlocks.push_back(StoreBB);
continue;
}
} else if (LI->getParent() != StoreBB &&
!DT.dominates(StoreBB, LI->getParent())) {
// If the load and store are in different blocks, use BB dominance to
// check their relationships. If the store doesn't dom the use, bail
// out.
Info.UsingBlocks.push_back(LI->getParent());
continue;
}
}
// Otherwise, we *can* safely rewrite this load.
Value *ReplVal = OnlyStore->getOperand(0);
// If the replacement value is the load, this must occur in unreachable
// code.
if (ReplVal == LI)
ReplVal = UndefValue::get(LI->getType());
// If the load was marked as nonnull we don't want to lose
// that information when we erase this Load. So we preserve
// it with an assume.
if (AC && LI->getMetadata(LLVMContext::MD_nonnull) &&
!isKnownNonZero(ReplVal, DL, 0, AC, LI, &DT))
addAssumeNonNull(AC, LI);
LI->replaceAllUsesWith(ReplVal);
LI->eraseFromParent();
LBI.deleteValue(LI);
}
// Finally, after the scan, check to see if the store is all that is left.
if (!Info.UsingBlocks.empty())
return false; // If not, we'll have to fall back for the remainder.
// Record debuginfo for the store and remove the declaration's
// debuginfo.
for (DbgVariableIntrinsic *DII : Info.DbgDeclares) {
DIBuilder DIB(*AI->getModule(), /*AllowUnresolved*/ false);
ConvertDebugDeclareToDebugValue(DII, Info.OnlyStore, DIB);
DII->eraseFromParent();
LBI.deleteValue(DII);
}
// Remove the (now dead) store and alloca.
Info.OnlyStore->eraseFromParent();
LBI.deleteValue(Info.OnlyStore);
AI->eraseFromParent();
LBI.deleteValue(AI);
return true;
}
