void ModelNode::update() {
if (!_initialized)
return;
Math::Vector3d animPos = _pos + _animPos;
Math::Angle animPitch = _pitch + _animPitch;
Math::Angle animYaw = _yaw + _animYaw;
Math::Angle animRoll = _roll + _animRoll;
_localMatrix.setPosition(animPos);
_localMatrix.buildFromPitchYawRoll(animPitch, animYaw, animRoll);
_matrix = _localMatrix * _matrix;
_pivotMatrix = _matrix;
_pivotMatrix.translate(_pivot);
if (_mesh) {
_mesh->_matrix = _pivotMatrix;
}
ModelNode *child = _child;
while (child) {
child->setMatrix(_matrix);
child->update();
child = child->_sibling;
}
}
void ModelNode::update() {
if (!_initialized)
return;
Graphics::Vector3d animPos = _pos + _animPos;
float animPitch = _pitch + _animPitch;
float animYaw = _yaw + _animYaw;
float animRoll = _roll + _animRoll;
_localMatrix._pos.set(animPos.x(), animPos.y(), animPos.z());
_localMatrix._rot.buildFromPitchYawRoll(animPitch, animYaw, animRoll);
_matrix *= _localMatrix;
_pivotMatrix = _matrix;
_pivotMatrix.translate(_pivot.x(), _pivot.y(), _pivot.z());
if (_mesh) {
_mesh->_matrix = _pivotMatrix;
}
ModelNode *child = _child;
while (child) {
child->setMatrix(_matrix);
child->update();
child = child->_sibling;
}
}
void Head::Joint::orientTowards(bool entering, const Math::Vector3d &point, float rate, const Math::Matrix4 &matrix,
float maxPitch, float maxYaw, float maxRoll, float constrain) {
float step = g_grim->getPerSecond(rate);
float yawStep = step;
float pitchStep = step / 3.0f;
float rollStep = step / 3.0f;
if (!_node)
return;
// Make sure we have up-to-date world transform matrices computed for the joint nodes of this character.
_node->_needsUpdate = true;
ModelNode *p = _node;
while (p->_parent) {
p = p->_parent;
p->_needsUpdate = true;
}
p->setMatrix(matrix);
p->update();
Math::Vector3d modelFront; // the modeling convention for the forward direction.
Math::Vector3d modelUp; // the modeling convention for the upward direction.
Math::Vector3d frontDir; // Character front facing direction vector in world space (global scene coordinate space)
// the character head coordinate frame is: +Y forward, +Z up, +X right.
frontDir = Math::Vector3d(_node->_matrix(0,1), _node->_matrix(1,1), _node->_matrix(2,1)); // Look straight ahead. (+Y)
modelFront = Math::Vector3d(0,1,0);
modelUp = Math::Vector3d(0,0,1);
// v is the world space direction vector this character should be looking towards.
Math::Vector3d targetDir = point - _node->_pivotMatrix.getPosition();
if (!entering)
targetDir = frontDir;
if (targetDir.isZero())
return;
targetDir.normalize();
// The vector v is in world space, so generate the world space lookat matrix for the desired head facing
// orientation.
Math::Matrix4 lookAtTM;
lookAtTM.setToIdentity();
const Math::Vector3d worldUp(0,0,1); // The Residual scene convention: +Z is world space up.
if (Math::Vector3d::dotProduct(targetDir, worldUp) >= 0.98f) // Avoid singularity if trying to look straight up.
lookAtTM.buildFromTargetDir(modelFront, targetDir, modelUp, -frontDir); // Instead of orienting head towards scene up, orient head towards character "back",
// i.e. when you look straight up, your head up vector tilts/arches to point straight backwards.
else if (Math::Vector3d::dotProduct(targetDir, worldUp) <= -0.98f) // Avoid singularity if trying to look straight down.
lookAtTM.buildFromTargetDir(modelFront, targetDir, modelUp, frontDir); // Instead of orienting head towards scene down, orient head towards character "front",
// i.e. when you look straight down, your head up vector tilts/arches to point straight forwards.
else
lookAtTM.buildFromTargetDir(modelFront, targetDir, modelUp, worldUp);
// The above specifies the world space orientation of this bone, but we need to output
// the orientation in parent space (as yaw/pitch/roll).
// Get the coordinate frame in which we need to produce the character head yaw/pitch/roll values.
Math::Matrix4 parentWorldTM;
if (_node->_parent)
parentWorldTM = _node->_parent->_matrix;
// While we could compute the desired lookat direction directly in the above coordinate frame,
// it is preferrable to compute the lookat direction with respect to the head orientation in
// the keyframe animation. This is because the LUA scripts specify the maximum head yaw, pitch and
// roll values with respect to those keyframe animations. If the lookat was simply computed
// directly in the space of the parent, we couldn't apply the head maxYaw/Pitch/Roll constraints
// properly. So, compute the coordinate frame of this bone in the keyframe animation.
Math::Matrix4 animFrame = _node->_localMatrix;
parentWorldTM = parentWorldTM * animFrame;
parentWorldTM.invertAffineOrthonormal();
// Convert lookAtTM orientation from world space to parent-with-keyframe-animation space.
lookAtTM = parentWorldTM * lookAtTM;
// Decompose to yaw-pitch-roll (+Z, +X, +Y).
// In this space, Yaw is +Z. Pitch is +X. Roll is +Y.
Math::Angle y, pt, r;
lookAtTM.getPitchYawRoll(&pt, &y, &r);
y = y * constrain;
pt = pt * constrain;
r = r * constrain;
// Constrain the maximum head movement, as desired by the game LUA scripts.
y.clampDegrees(maxYaw);
pt.clampDegrees(maxPitch);
r.clampDegrees(maxRoll);
// Also limit yaw, pitch and roll to make at most a movement as large as the given max step size during this frame.
// This will produce a slow head-turning animation instead of immediately snapping to the
// target lookat orientation.
if (y - _yaw > yawStep)
y = _yaw + yawStep;
if (_yaw - y > yawStep)
y = _yaw - yawStep;
if (pt - _pitch > pitchStep)
pt = _pitch + pitchStep;
if (_pitch - pt > pitchStep)
pt = _pitch - pitchStep;
if (r - _roll > rollStep)
r = _roll + rollStep;
if (_roll - r > rollStep)
r = _roll - rollStep;
// Remember how far we animated the head this frame, and we'll continue from here the next frame.
_pitch = pt;
_yaw = y;
_roll = r;
// Assemble ypr back to a matrix.
// This matrix is the head orientation with respect to parent-with-keyframe-animation space.
lookAtTM.buildFromPitchYawRoll(pt, y, r);
// What follows is a hack: Since translateObject(ModelNode *node, bool reset) in this file,
// and GfxOpenGL/GfxTinyGL::drawHierachyNode concatenate transforms incorrectly, by summing up
// euler angles, do a hack here where we do the proper transform here already, and *subtract off*
// the YPR scalars from the animYPR scalars to cancel out the values that those pieces of code
// will later accumulate. After those pieces of code have been fixed, the following lines can
// be deleted, and this function can simply output the contents of pt, y and r variables above.
lookAtTM = animFrame * lookAtTM;
lookAtTM.getPitchYawRoll(&pt, &y, &r);
_node->_animYaw = y - _node->_yaw;
_node->_animPitch = pt - _node->_pitch;
_node->_animRoll = r - _node->_roll;
}
void Head::lookAt(bool entering, const Math::Vector3d &point, float rate, const Math::Matrix4 &matrix) {
if (_joint1Node) {
float step = g_grim->getPerSecond(rate);
float yawStep = step;
float pitchStep = step / 3.f;
if (!entering) {
//animate yaw
if (_headYaw > yawStep) {
_headYaw -= yawStep;
} else if (_headYaw < -yawStep) {
_headYaw += yawStep;
} else {
_headYaw = 0;
}
//animate pitch
if (_headPitch > pitchStep) {
_headPitch -= pitchStep;
} else if (_headPitch < -pitchStep) {
_headPitch += pitchStep;
} else {
_headPitch = 0;
}
_joint1Node->_animYaw = _headYaw;
Math::Angle pi = _headPitch / 3.f;
_joint1Node->_animPitch += pi;
_joint2Node->_animPitch += pi;
_joint3Node->_animPitch += pi;
_joint1Node->_animRoll = (_joint1Node->_animYaw.getDegrees() / 20.f) *
_headPitch.getDegrees() / -5.f;
if (_joint1Node->_animRoll > _maxRoll)
_joint1Node->_animRoll = _maxRoll;
if (_joint1Node->_animRoll < -_maxRoll)
_joint1Node->_animRoll = -_maxRoll;
return;
}
ModelNode *p = _joint3Node;
while (p->_parent) {
p = p->_parent;
}
p->setMatrix(matrix);
p->update();
Math::Vector3d v = point - _joint3Node->_matrix.getPosition();
if (v.isZero()) {
return;
}
float magnitude = sqrt(v.x() * v.x() + v.y() * v.y());
float a = v.x() / magnitude;
float b = v.y() / magnitude;
float yaw;
yaw = acos(a) * (180.0f / LOCAL_PI);
if (b < 0.0f)
yaw = 360.0f - yaw;
Math::Angle bodyYaw = matrix.getYaw();
p = _joint1Node->_parent;
while (p) {
bodyYaw += p->_yaw + p->_animYaw;
p = p->_parent;
}
_joint1Node->_animYaw = (- 90 + yaw - bodyYaw);
if (_joint1Node->_animYaw < -180.) {
_joint1Node->_animYaw += 360;
}
if (_joint1Node->_animYaw > 180.) {
_joint1Node->_animYaw -= 360;
}
if (_joint1Node->_animYaw > _maxYaw)
_joint1Node->_animYaw = _maxYaw;
if (_joint1Node->_animYaw < -_maxYaw)
_joint1Node->_animYaw = -_maxYaw;
float sqLenght = v.x() * v.x() + v.y() * v.y();
float h;
if (sqLenght > 0) {
h = sqrt(sqLenght);
} else {
h = -sqrt(sqLenght);
}
magnitude = sqrt(v.z() * v.z() + h * h);
a = h / magnitude;
b = v.z() / magnitude;
Math::Angle pitch;
pitch = acos(a) * (180.0f / LOCAL_PI);
if (b < 0.0f)
pitch = 360.0f - pitch;
if (pitch > 180)
pitch -= 360;
if (pitch > _maxPitch)
pitch = _maxPitch;
if (pitch < -_maxPitch)
pitch = -_maxPitch;
if ((_joint1Node->_animYaw > 0 && pitch < 0) || (_joint1Node->_animYaw < 0 && pitch > 0)) {
pitch += _joint1Node->_animYaw / 10.f;
} else {
pitch -= _joint1Node->_animYaw / 10.f;
}
//animate pitch
if (pitch - _headPitch > pitchStep)
pitch = _headPitch + pitchStep;
if (_headPitch - pitch > pitchStep)
pitch = _headPitch - pitchStep;
Math::Angle pi = pitch / 3.f;
_joint1Node->_animPitch += pi;
_joint2Node->_animPitch += pi;
_joint3Node->_animPitch += pi;
//animate yaw
if (_joint1Node->_animYaw - _headYaw > yawStep)
_joint1Node->_animYaw = _headYaw + yawStep;
if (_headYaw - _joint1Node->_animYaw > yawStep)
_joint1Node->_animYaw = _headYaw - yawStep;
_joint1Node->_animRoll = (_joint1Node->_animYaw.getDegrees() / 20.f) *
pitch.getDegrees() / -5.f;
if (_joint1Node->_animRoll > _maxRoll)
_joint1Node->_animRoll = _maxRoll;
if (_joint1Node->_animRoll < -_maxRoll)
_joint1Node->_animRoll = -_maxRoll;
_headPitch = pitch;
_headYaw = _joint1Node->_animYaw;
}
}
