void PEQGraph::_drawHumpSolid(QSGNode * parentNode, int n, QColor color) {
//Transparent shaded part//
QSGGeometryNode * solidNode = new QSGGeometryNode();
QSGGeometry * solidGeom = new QSGGeometry(QSGGeometry::defaultAttributes_Point2D(), 2 * (HorizontalDivisions + 1));
QSGFlatColorMaterial *material = new QSGFlatColorMaterial;
material->setColor(color);
material->setFlag(QSGMaterial::Blending);
solidNode->setMaterial(material);
solidNode->setFlag(QSGNode::OwnsGeometry);
solidNode->setFlag(QSGNode::OwnedByParent);
solidNode->setFlag(QSGNode::OwnsMaterial);
solidGeom->setDrawingMode(GL_TRIANGLE_STRIP);
QSGGeometry::Point2D* point = solidGeom->vertexDataAsPoint2D();
float left = graphToNodeX(xAxis.min);
float mid = graphToNodeY(0);
float width = graphToNodeX(xAxis.max) - graphToNodeX(xAxis.min);
float stride = width / HorizontalDivisions;
for (int i = 0; i < HorizontalDivisions + 1; i++) {
point->set(left + i*stride, mid);
point++;
point->set(left + i*stride, graphToNodeY(computedData[i][n]));
point++;
}
solidNode->setGeometry(solidGeom);
parentNode->appendChildNode(solidNode);
}
void PEQGraph::_drawHumpOutline(QSGNode * parentNode, int n, QColor color) {
//Solid Outline
QSGGeometryNode * lineNode = new QSGGeometryNode();
QSGGeometry * lineGeom = new QSGGeometry(QSGGeometry::defaultAttributes_Point2D(), (HorizontalDivisions));
QSGFlatColorMaterial *material2 = new QSGFlatColorMaterial;
material2->setColor(color);
material2->setFlag(QSGMaterial::Blending);
lineNode->setMaterial(material2);
lineNode->setFlag(QSGNode::OwnsGeometry);
lineNode->setFlag(QSGNode::OwnedByParent);
lineNode->setFlag(QSGNode::OwnsMaterial);
lineGeom->setDrawingMode(GL_LINE_STRIP);
glLineWidth(2.0f);
QSGGeometry::Point2D* point2 = lineGeom->vertexDataAsPoint2D();
float left = graphToNodeX(xAxis.min);
float width = graphToNodeX(xAxis.max) - graphToNodeX(xAxis.min);
float stride = width / HorizontalDivisions;
for (int i = 0; i < HorizontalDivisions; i++) {
float x1 = left + (i)*stride;
float y1 = graphToNodeY(computedData[i][n]);
point2->set(x1, y1);
point2++;
}
lineNode->setGeometry(lineGeom);
parentNode->appendChildNode(lineNode);
}
QcLocationCircleNode::QcLocationCircleNode(const QcViewport * viewport)
: QSGOpacityNode(),
m_viewport(viewport),
m_geometry_node(new QSGGeometryNode())
{
setOpacity(.25); // 1. black
QSGGeometry * geometry = new QSGGeometry(LocationCirclePoint2D_AttributeSet, 0); // Fixme:
geometry->setDrawingMode(GL_TRIANGLE_STRIP);
m_geometry_node->setGeometry(geometry);
m_geometry_node->setFlag(QSGNode::OwnsGeometry);
QSGSimpleMaterial<QcLocationCircleMaterialShaderState> * material = QcLocationCircleMaterialShader::createMaterial();
material->state()->cone_r = 0; // Fixme: QColor
material->state()->cone_g = 0;
material->state()->cone_b = 1;
material->state()->cone_a = 1.;
material->state()->accuracy_r = 1;
material->state()->accuracy_g = 0;
material->state()->accuracy_b = 0;
material->state()->accuracy_a = 1.;
// QSGFlatColorMaterial * material = new QSGFlatColorMaterial();
// material->setColor(QColor("black"));
material->setFlag(QSGMaterial::Blending);
m_geometry_node->setMaterial(material);
m_geometry_node->setFlag(QSGNode::OwnsMaterial);
appendChildNode(m_geometry_node);
}
QSGNode *PhosphorRender::updatePaintNode(QSGNode *oldNode, UpdatePaintNodeData *)
{
if (!m_ybuffer) {
return 0;
}
QSGGeometryNode *node = 0;
QSGGeometry *geometry = 0;
Material *material = 0;
unsigned n_points;
if (m_xbuffer) {
n_points = std::min(m_xbuffer->size(), m_ybuffer->size());
} else {
n_points = m_ybuffer->countPointsBetween(m_xmin, m_xmax);
}
n_points = std::min(n_points,(unsigned) 65767);
if (!oldNode) {
node = new QSGGeometryNode;
geometry = new QSGGeometry(QSGGeometry::defaultAttributes_Point2D(), n_points);
geometry->setDrawingMode(GL_POINTS);
node->setGeometry(geometry);
node->setFlag(QSGNode::OwnsGeometry);
material = new Material;
material->setFlag(QSGMaterial::Blending);
node->setMaterial(material);
node->setFlag(QSGNode::OwnsMaterial);
} else {
node = static_cast<QSGGeometryNode *>(oldNode);
geometry = node->geometry();
geometry->allocate(n_points);
geometry->setLineWidth(m_pointSize);
material = static_cast<Material*>(node->material());
}
QRectF bounds = boundingRect();
material->transformation.setToIdentity();
material->transformation.scale(bounds.width()/(m_xmax - m_xmin), bounds.height()/(m_ymin - m_ymax));
material->transformation.translate(-m_xmin, -m_ymax);
material->pointSize = m_pointSize;
material->color = m_color;
auto verticies = geometry->vertexDataAsPoint2D();
if (m_xbuffer) {
for (unsigned i=0; i<n_points; i++) {
verticies[i].set(m_xbuffer->get(i), m_ybuffer->get(i));
}
} else {
m_ybuffer->toVertexData(m_xmin, m_xmax, verticies, n_points);
}
node->markDirty(QSGNode::DirtyGeometry | QSGNode::DirtyMaterial);
return node;
}
/*------------------------------------------------------------------------------
| OMX_CameraSurfaceElement::updatePaintNode
+-----------------------------------------------------------------------------*/
QSGNode* OMX_CameraSurfaceElement::updatePaintNode(QSGNode* oldNode, UpdatePaintNodeData*)
{
QSGGeometryNode* node = 0;
QSGGeometry* geometry = 0;
if (!oldNode) {
// Create the node.
node = new QSGGeometryNode;
geometry = new QSGGeometry(QSGGeometry::defaultAttributes_TexturedPoint2D(), 4);
geometry->setDrawingMode(GL_TRIANGLE_STRIP);
node->setGeometry(geometry);
node->setFlag(QSGNode::OwnsGeometry);
// TODO: Who is freeing this?
// TODO: I cannot know the texture size here.
QSGOpaqueTextureMaterial* material = new QSGOpaqueTextureMaterial;
m_sgtexture = new OMX_SGTexture(0, QSize(640, 480));
material->setTexture(m_sgtexture);
node->setMaterial(material);
node->setFlag(QSGNode::OwnsMaterial);
QtConcurrent::run(this, &OMX_CameraSurfaceElement::videoAcquire);
}
else {
node = static_cast<QSGGeometryNode*>(oldNode);
geometry = node->geometry();
geometry->allocate(4);
// Update texture in the node if needed.
QSGOpaqueTextureMaterial* material = (QSGOpaqueTextureMaterial*)node->material();
QElapsedTimer timer;
timer.start();
QSGTexture* texture = window()->createTextureFromImage(m_frame);
LOG_VERBOSE(LOG_TAG, "Timer tex: %lld.", timer.elapsed());
material->setTexture(texture);
m_semAcquire.release();
#if 0
if (m_texture != (GLuint)material->texture()->textureId()) {
// TODO: Does setTextureId frees the prev texture?
// TODO: I should the given the texture size.
LOG_ERROR(LOG_TAG, "Updating texture to %u!", m_texture);
material = new QSGOpaqueTextureMaterial;
m_sgtexture->setTexture(m_texture, QSize(1920, 1080));
}
#endif
}
// Create the vertices and map to texture.
QRectF bounds = boundingRect();
QSGGeometry::TexturedPoint2D* vertices = geometry->vertexDataAsTexturedPoint2D();
vertices[0].set(bounds.x(), bounds.y() + bounds.height(), 0.0f, 0.0f);
vertices[1].set(bounds.x() + bounds.width(), bounds.y() + bounds.height(), 1.0f, 0.0f);
vertices[2].set(bounds.x(), bounds.y(), 0.0f, 1.0f);
vertices[3].set(bounds.x() + bounds.width(), bounds.y(), 1.0f, 1.0f);
return node;
}
QSGNode * QQuickLineItem::updatePaintNode(QSGNode *prev_node,
UpdatePaintNodeData *upd_data)
{
Q_UNUSED(upd_data);
QSGGeometryNode * node = static_cast<QSGGeometryNode*>(prev_node);
QSGGeometry * geometry = NULL;
QSGFlatColorMaterial * material = NULL;
if(!node) {
// http://qt-project.org/doc/qt-5/qsggeometrynode.html
node = new QSGGeometryNode;
geometry = new QSGGeometry(QSGGeometry::defaultAttributes_Point2D(),4);
geometry->setDrawingMode(GL_TRIANGLE_STRIP);
node->setGeometry(geometry);
node->setFlag(QSGNode::OwnsGeometry);
material = new QSGFlatColorMaterial;
material->setColor(m_color);
node->setMaterial(material);
node->setFlag(QSGNode::OwnsMaterial);
}
else {
geometry = node->geometry();
geometry->allocate(4); // we have to call allocate to invalidate
// the older vertex buffer
material = static_cast<QSGFlatColorMaterial*>(node->material());
}
// geometry
std::vector<QPointF> list_vx;
if(!calcTriStrip(list_vx)) {
list_vx.clear();
list_vx.push_back(QPointF(0,0));
list_vx.push_back(QPointF(0,0));
list_vx.push_back(QPointF(0,0));
list_vx.push_back(QPointF(0,0));
}
QSGGeometry::Point2D * vertices =
geometry->vertexDataAsPoint2D();
for(size_t i=0; i < list_vx.size(); i++) {
vertices[i].set(list_vx[i].x(),
list_vx[i].y());
}
node->markDirty(QSGNode::DirtyGeometry);
// material
material->setColor(m_color);
node->markDirty(QSGNode::DirtyMaterial);
return node;
}
void SceneGraphDeviceContext::DrawComplexBezierPath(vrv::Point bezier1[4], vrv::Point bezier2[4])
{
// Note: No support for vertex antialiasing. Use a top-level QQuickView with multisample antialiasing.
// TODO: Add vertex antialiasing, refer to
// 1) Qt sources for "void QSGBasicInternalRectangleNode::updateGeometry()" in
// qtdeclarative/src/quick/scenegraph/qsgbasicinternalrectanglenode.cpp
// 2) https://stackoverflow.com/questions/28125425/smooth-painting-in-custom-qml-element
vrv::Pen currentPen = m_penStack.top();
int segmentCount = 16;
QSGGeometryNode *node = new QSGGeometryNode;
QSGGeometry *geometry = new QSGGeometry(QSGGeometry::defaultAttributes_Point2D(), 2 * segmentCount);
geometry->setDrawingMode(QSGGeometry::DrawTriangleStrip);
node->setGeometry(geometry);
node->setFlag(QSGNode::OwnsGeometry);
QSGFlatColorMaterial *material = new QSGFlatColorMaterial;
material->setColor(static_cast<QRgb>(currentPen.GetColour()));
node->setMaterial(material);
node->setFlag(QSGNode::OwnsMaterial);
auto calculateCubicBezierPoint = [](vrv::Point p[4], float t) -> std::tuple<float, float> {
auto invt = 1 - t;
auto x = invt * invt * invt * p[0].x + 3 * invt * invt * t * p[1].x + 3 * invt * t * t * p[2].x
+ t * t * t * p[3].x;
auto y = invt * invt * invt * p[0].y + 3 * invt * invt * t * p[1].y + 3 * invt * t * t * p[2].y
+ t * t * t * p[3].y;
return std::make_tuple(x, y);
};
// This loop calculates the bezier points for the inner and the outer line and add them as vertices. The list of
// vertices is built so that points from the inner and outer line are alternating. This allows to draw a filled area
// with DrawTriangleStrip.
QSGGeometry::Point2D *vertices = geometry->vertexDataAsPoint2D();
for (int i = 0; i < segmentCount; ++i) {
float bezierPointX = 0;
float bezierPointY = 0;
float currentSegment = i / static_cast<float>(segmentCount - 1);
// Calculate bezier point on bezier1
std::tie(bezierPointX, bezierPointY) = calculateCubicBezierPoint(bezier1, currentSegment);
vertices[i * 2].set(translateX(bezierPointX), translateY(bezierPointY));
// Calculate bezier point on bezier2
std::tie(bezierPointX, bezierPointY) = calculateCubicBezierPoint(bezier2, currentSegment);
vertices[i * 2 + 1].set(translateX(bezierPointX), translateY(bezierPointY));
}
node->markDirty(QSGNode::DirtyGeometry);
AddGeometryNode(node);
}
//! [4]
QSGNode *BezierCurve::updatePaintNode(QSGNode *oldNode, UpdatePaintNodeData *)
{
QSGGeometryNode *node = 0;
QSGGeometry *geometry = 0;
if (!oldNode) {
node = new QSGGeometryNode;
//! [4] //! [5]
geometry = new QSGGeometry(QSGGeometry::defaultAttributes_Point2D(), m_segmentCount);
geometry->setLineWidth(2);
geometry->setDrawingMode(GL_LINE_STRIP);
node->setGeometry(geometry);
node->setFlag(QSGNode::OwnsGeometry);
//! [5] //! [6]
QSGFlatColorMaterial *material = new QSGFlatColorMaterial;
material->setColor(QColor(255, 0, 0));
node->setMaterial(material);
node->setFlag(QSGNode::OwnsMaterial);
//! [6] //! [7]
} else {
node = static_cast<QSGGeometryNode *>(oldNode);
geometry = node->geometry();
geometry->allocate(m_segmentCount);
}
//! [7]
//! [8]
QRectF bounds = boundingRect();
QSGGeometry::Point2D *vertices = geometry->vertexDataAsPoint2D();
for (int i = 0; i < m_segmentCount; ++i) {
qreal t = i / qreal(m_segmentCount - 1);
qreal invt = 1 - t;
QPointF pos = invt * invt * invt * m_p1
+ 3 * invt * invt * t * m_p2
+ 3 * invt * t * t * m_p3
+ t * t * t * m_p4;
float x = bounds.x() + pos.x() * bounds.width();
float y = bounds.y() + pos.y() * bounds.height();
vertices[i].set(x, y);
}
node->markDirty(QSGNode::DirtyGeometry);
//! [8]
//! [9]
return node;
}
void DynamicController::drawGateCompressor(QSGNode * rootNode) {
if (knobs.count() == 0) {
return;
}
//Update knobs
if (!this->simple()) {
QObject * gateKnob = knobs[0];
QObject * compThreshKnob = knobs[1];
QObject * compRatioKnob = knobs[2];
gateKnob->setProperty("x", graphToNodeX(_tempModel["gatex"]));
gateKnob->setProperty("y", graphToNodeY(_tempModel["gatey"]));
compThreshKnob->setProperty("x", graphToNodeX(_tempModel["compx"]));
compThreshKnob->setProperty("y", graphToNodeY(_tempModel["compy"]));
compRatioKnob->setProperty("x", graphToNodeX(xAxis.max));
compRatioKnob->setProperty("y", graphToNodeY(_tempModel["compy"]) * (1 - _tempModel["ratio"]));
}
QSGGeometryNode * lineNode = new QSGGeometryNode();
QSGGeometry * lineGeom = new QSGGeometry(QSGGeometry::defaultAttributes_Point2D(), (4));
QSGFlatColorMaterial *material = new QSGFlatColorMaterial;
material->setColor(this->curveColor());
material->setFlag(QSGMaterial::Blending);
lineNode->setMaterial(material);
lineNode->setFlag(QSGNode::OwnsGeometry);
lineNode->setFlag(QSGNode::OwnedByParent);
lineNode->setFlag(QSGNode::OwnsMaterial);
lineGeom->setDrawingMode(GL_LINE_STRIP);
glLineWidth(2.0f);
QSGGeometry::Point2D* points = lineGeom->vertexDataAsPoint2D();
QRectF bounds = boundingRect();
points->set(graphToNodeX(_tempModel["gatex"]), bounds.bottom()); points++;
points->set(graphToNodeX(_tempModel["gatex"]), graphToNodeY(_tempModel["gatey"])); points++;
points->set(graphToNodeX(_tempModel["compx"]), graphToNodeY(_tempModel["compy"])); points++;
points->set(graphToNodeX(xAxis.max), graphToNodeY(_tempModel["compy"]) * (1 - _tempModel["ratio"])); points++;
lineNode->setGeometry(lineGeom);
rootNode->appendChildNode(lineNode);
}
QSGGeometryNode *createSelectionNode(QSGMaterial *material)
{
QSGGeometryNode *selectionNode = new QSGGeometryNode;
selectionNode->setMaterial(material);
selectionNode->setFlag(QSGNode::OwnsMaterial, false);
QSGGeometry *geometry = new QSGGeometry(OpaqueColoredPoint2DWithSize::attributes(), 4);
geometry->setDrawingMode(GL_TRIANGLE_STRIP);
OpaqueColoredPoint2DWithSize *v = OpaqueColoredPoint2DWithSize::fromVertexData(geometry);
for (int i = 0; i < 4; ++i)
v[i].set(0, 0, 0, 0, 0, 0, 0, 0);
selectionNode->setGeometry(geometry);
selectionNode->setFlag(QSGNode::OwnsGeometry, true);
selectionNode->setFlag(QSGNode::OwnedByParent, false);
return selectionNode;
}
void SceneGraphDeviceContext::DrawPolygon(int n, vrv::Point points[], int xoffset, int yoffset, int)
{
// Note: No support for vertex antialiasing. Use a top-level QQuickView with multisample antialiasing.
// TODO: Add vertex antialiasing, refer to
// 1) Qt sources for "void QSGBasicInternalRectangleNode::updateGeometry()" in
// qtdeclarative/src/quick/scenegraph/qsgbasicinternalrectanglenode.cpp
// 2) https://stackoverflow.com/questions/28125425/smooth-painting-in-custom-qml-element
// TODO: This function only works for convex polygons. At the moment verovio calls this function only with n = 4.
// Maybe this function should be renamed to DrawConvexPolygon
vrv::Pen currentPen = m_penStack.top();
QSGGeometry *geometry;
geometry = new QSGGeometry(QSGGeometry::defaultAttributes_Point2D(), n);
geometry->setDrawingMode(QSGGeometry::DrawTriangleStrip);
QSGFlatColorMaterial *material = new QSGFlatColorMaterial;
material->setColor(static_cast<QRgb>(currentPen.GetColour()));
// Reorder points so that they can be drawn with DrawTriangleStrip.
int counter1 = 0;
int counter2 = n - 1;
for (int i = 0; i < n; i++) {
if (i % 2 == 0) {
geometry->vertexDataAsPoint2D()[i].set(
translateX(points[counter1].x + xoffset), translateY(points[counter1].y + yoffset));
counter1++;
}
else {
geometry->vertexDataAsPoint2D()[i].set(
translateX(points[counter2].x + xoffset), translateY(points[counter2].y + yoffset));
counter2--;
}
}
QSGGeometryNode *node = new QSGGeometryNode;
node->setGeometry(geometry);
node->setFlag(QSGNode::OwnsGeometry);
node->setMaterial(material);
node->setFlag(QSGNode::OwnsMaterial);
AddGeometryNode(node);
}
void DynamicController::drawCompressor(QSGNode * rootNode) {
//Update knobs
if (!this->simple()) {
QObject * threshKnob = knobs[0];
QObject * ratKnob = knobs[1];
threshKnob->setProperty("x", graphToNodeX(_tempModel["compx"]));
threshKnob->setProperty("y", graphToNodeY(_tempModel["compy"]));
ratKnob->setProperty("x", graphToNodeX(yAxis.max));
ratKnob->setProperty("y", graphToNodeY(_tempModel["compy"]) * (1 - _tempModel["ratio"]));
}
QSGGeometryNode * lineNode = new QSGGeometryNode();
QSGGeometry * lineGeom = new QSGGeometry(QSGGeometry::defaultAttributes_Point2D(), (3));
QSGFlatColorMaterial *material = new QSGFlatColorMaterial;
material->setColor(this->curveColor());
material->setFlag(QSGMaterial::Blending);
lineNode->setMaterial(material);
lineNode->setFlag(QSGNode::OwnsGeometry);
lineNode->setFlag(QSGNode::OwnedByParent);
lineNode->setFlag(QSGNode::OwnsMaterial);
lineGeom->setDrawingMode(GL_LINE_STRIP);
glLineWidth(2.0f);
QSGGeometry::Point2D* points = lineGeom->vertexDataAsPoint2D();
QRectF bounds = boundingRect();
points->set(bounds.left(), bounds.bottom()); points++;
for (int i = 0; i < 2; i++) {
QQuickItem * q = qobject_cast<QQuickItem*>(knobs[i]);
points->set(q->x(), q->y());
points++;
}
lineNode->setGeometry(lineGeom);
rootNode->appendChildNode(lineNode);
}
void SceneGraphDeviceContext::DrawLine(int x1, int y1, int x2, int y2)
{
vrv::Pen currentPen = m_penStack.top();
QSGGeometry *geometry = new QSGGeometry(QSGGeometry::defaultAttributes_Point2D(), 2);
geometry->setDrawingMode(GL_LINES);
geometry->setLineWidth(translate(currentPen.GetWidth()));
geometry->vertexDataAsPoint2D()[0].set(translateX(x1), translateY(y1));
geometry->vertexDataAsPoint2D()[1].set(translateX(x2), translateY(y2));
QSGFlatColorMaterial *material = new QSGFlatColorMaterial;
material->setColor(static_cast<QRgb>(currentPen.GetColour()));
QSGGeometryNode *node = new QSGGeometryNode;
node->setGeometry(geometry);
node->setFlag(QSGNode::OwnsGeometry);
node->setMaterial(material);
node->setFlag(QSGNode::OwnsMaterial);
AddGeometryNode(node);
}
QSGNode* drawRect(const QRect& rect, QSGNode* oldNode)
{
QSGGeometryNode* node;
if (oldNode == nullptr)
{
node = new QSGGeometryNode;
QSGGeometry* geometry = new QSGGeometry(QSGGeometry::defaultAttributes_Point2D(), 8);
geometry->setDrawingMode(GL_LINES);
geometry->setLineWidth(1);
QSGFlatColorMaterial* material = new QSGFlatColorMaterial;
material->setColor(QGuiApplication::palette().color(QPalette::Normal, QPalette::WindowText));
node->setGeometry(geometry);
node->setFlag(QSGNode::OwnsGeometry);
node->setMaterial(material);
node->setFlag(QSGNode::OwnsMaterial);
}
else
{
node = static_cast<QSGGeometryNode*>(oldNode);
}
QSGGeometry* geometry = node->geometry();
// FIXME: check if these really have to be updated
geometry->vertexDataAsPoint2D()[0].set(rect.topLeft().x(), rect.topLeft().y());
geometry->vertexDataAsPoint2D()[1].set(rect.topRight().x(), rect.topRight().y());
geometry->vertexDataAsPoint2D()[2].set(rect.topRight().x(), rect.topRight().y());
geometry->vertexDataAsPoint2D()[3].set(rect.bottomRight().x(), rect.bottomRight().y());
geometry->vertexDataAsPoint2D()[4].set(rect.bottomRight().x(), rect.bottomRight().y());
geometry->vertexDataAsPoint2D()[5].set(rect.bottomLeft().x(), rect.bottomLeft().y());
geometry->vertexDataAsPoint2D()[6].set(rect.bottomLeft().x(), rect.bottomLeft().y());
geometry->vertexDataAsPoint2D()[7].set(rect.topLeft().x(), rect.topLeft().y());
node->markDirty(QSGNode::DirtyGeometry);
return node;
}
QSGNode *QPScrollingCurve::updatePaintNode(QSGNode *oldNode, QQuickItem::UpdatePaintNodeData *)
{
QSGGeometryNode *node = 0;
QSGGeometry *geometry = 0;
QSGFlatColorMaterial *material = 0;
if (!oldNode) {
node = new QSGGeometryNode;
geometry = new QSGGeometry(QSGGeometry::defaultAttributes_Point2D(), m_data.size());
geometry->setLineWidth(2);
geometry->setDrawingMode(GL_LINE_STRIP);
node->setGeometry(geometry);
node->setFlag(QSGNode::OwnsGeometry);
material = new QSGFlatColorMaterial;
material->setColor(m_color);
node->setMaterial(material);
node->setFlag(QSGNode::OwnsMaterial);
node->markDirty(QSGNode::DirtyMaterial);
} else {
node = static_cast<QSGGeometryNode *>(oldNode);
geometry = node->geometry();
geometry->allocate(m_data.size());
material = static_cast<QSGFlatColorMaterial*>(node->material());
if (material->color() != m_color) {
material->setColor(m_color);
node->markDirty(QSGNode::DirtyMaterial);
}
}
QSGGeometry::Point2D *vertices = geometry->vertexDataAsPoint2D();
for (uint i = 0; i < m_data.size(); ++i) {
QPointF p(i, m_data[i]);
vertices[i].set(p.x(), p.y());
}
node->markDirty(QSGNode::DirtyGeometry);
return node;
}
QSGGeometry *NotesGeometry::createGeometry(QVector<int> &ids, const TimelineModel *model,
const TimelineRenderState *parentState, bool collapsed)
{
float rowHeight = TimelineModel::defaultRowHeight();
QSGGeometry *geometry = new QSGGeometry(point2DWithDistanceFromTop(),
ids.count() * 2);
geometry->setDrawingMode(GL_LINES);
geometry->setLineWidth(3);
Point2DWithDistanceFromTop *v =
static_cast<Point2DWithDistanceFromTop *>(geometry->vertexData());
for (int i = 0; i < ids.count(); ++i) {
int timelineIndex = ids[i];
float horizontalCenter = ((model->startTime(timelineIndex) +
model->endTime(timelineIndex)) / (qint64)2 -
parentState->start()) * parentState->scale();
float verticalStart = (collapsed ? (model->collapsedRow(timelineIndex) + 0.1) : 0.1) *
rowHeight;
float verticalEnd = verticalStart + 0.8 * rowHeight;
v[i * 2].set(horizontalCenter, verticalStart, 0);
v[i * 2 + 1].set(horizontalCenter, verticalEnd, 1);
}
return geometry;
}
void SceneGraphDeviceContext::DrawCircle(int x, int y, int radius)
{
// Note: No support for vertex antialiasing. Use a top-level QQuickView with multisample antialiasing.
// TODO: Add vertex antialiasing, refer to
// 1) Qt sources for "void QSGBasicInternalRectangleNode::updateGeometry()" in
// qtdeclarative/src/quick/scenegraph/qsgbasicinternalrectanglenode.cpp
// 2) https://stackoverflow.com/questions/28125425/smooth-painting-in-custom-qml-element
vrv::Pen currentPen = m_penStack.top();
int segmentCount = 16;
QSGGeometryNode *node = new QSGGeometryNode();
QSGGeometry *geometry = new QSGGeometry(QSGGeometry::defaultAttributes_Point2D(), segmentCount);
geometry->setDrawingMode(QSGGeometry::DrawTriangleFan);
node->setGeometry(geometry);
node->setFlag(QSGNode::OwnsGeometry);
QSGFlatColorMaterial *material = new QSGFlatColorMaterial;
material->setColor(static_cast<QRgb>(currentPen.GetColour()));
node->setMaterial(material);
node->setFlag(QSGNode::OwnsMaterial);
// This draws individual triangles from the first point (center) to every outer point by using DrawTriangleFan.
QSGGeometry::Point2D *vertices = geometry->vertexDataAsPoint2D();
int numPoints = geometry->vertexCount();
vertices[0].x = translateX(x);
vertices[0].y = translateY(y);
for (int i = 1; i < numPoints; ++i) {
double theta = i * 2 * M_PI / (numPoints - 2);
vertices[i].x = translateX(x + radius * static_cast<float>(std::cos(theta)));
vertices[i].y = translateY(y - radius * static_cast<float>(std::sin(theta)));
}
node->markDirty(QSGNode::DirtyGeometry);
AddGeometryNode(node);
}
void QQuickShapeGenericRenderer::updateStrokeNode(ShapePathData *d, QQuickShapeGenericNode *node)
{
if (!node->m_strokeNode)
return;
if (!(d->effectiveDirty & (DirtyStrokeGeom | DirtyColor)))
return;
QQuickShapeGenericStrokeFillNode *n = node->m_strokeNode;
QSGGeometry *g = n->geometry();
if (d->strokeVertices.isEmpty()) {
if (g->vertexCount() || g->indexCount()) {
g->allocate(0, 0);
n->markDirty(QSGNode::DirtyGeometry);
}
return;
}
n->markDirty(QSGNode::DirtyGeometry);
// Async loading runs update once, bails out above, then updates again once
// ready. Set the material dirty then. This is in-line with fill where the
// first activateMaterial() achieves the same.
if (!g->vertexCount())
n->markDirty(QSGNode::DirtyMaterial);
if ((d->effectiveDirty & DirtyColor) && !(d->effectiveDirty & DirtyStrokeGeom)) {
ColoredVertex *vdst = reinterpret_cast<ColoredVertex *>(g->vertexData());
for (int i = 0; i < g->vertexCount(); ++i)
vdst[i].set(vdst[i].x, vdst[i].y, d->strokeColor);
return;
}
g->allocate(d->strokeVertices.count(), 0);
g->setDrawingMode(QSGGeometry::DrawTriangleStrip);
memcpy(g->vertexData(), d->strokeVertices.constData(), g->vertexCount() * g->sizeOfVertex());
}
void DynamicController::drawGate(QSGNode * rootNode) {
//Update knobs
if (!this->simple()) {
QObject * gateKnob = knobs[0];
gateKnob->setProperty("x", graphToNodeX(_tempModel["gatex"]));
gateKnob->setProperty("y", graphToNodeY(_tempModel["gatey"]));
}
QSGGeometryNode * lineNode = new QSGGeometryNode();
QSGGeometry * lineGeom = new QSGGeometry(QSGGeometry::defaultAttributes_Point2D(), (3));
QSGFlatColorMaterial *material = new QSGFlatColorMaterial;
material->setColor(this->curveColor());
material->setFlag(QSGMaterial::Blending);
lineNode->setMaterial(material);
lineNode->setFlag(QSGNode::OwnsGeometry);
lineNode->setFlag(QSGNode::OwnedByParent);
lineNode->setFlag(QSGNode::OwnsMaterial);
lineGeom->setDrawingMode(GL_LINE_STRIP);
glLineWidth(2.0f);
QSGGeometry::Point2D* points = lineGeom->vertexDataAsPoint2D();
QRectF bounds = boundingRect();
points->set(graphToNodeX(_tempModel["gatex"]), bounds.bottom()); points++;
points->set(graphToNodeX(_tempModel["gatex"]), graphToNodeX(_tempModel["gatey"])); points++;
points->set(bounds.right(), bounds.top()); points++;
lineNode->setGeometry(lineGeom);
rootNode->appendChildNode(lineNode);
}
void
QcLocationCircleNode::update(const QcLocationCircleData & location_circle_data)
{
// QSGGeometry * location_circle_geometry = new QSGGeometry(QSGGeometry::defaultAttributes_Point2D(), 1);
// location_circle_geometry->setLineWidth(100); // point size, max is 255
// location_circle_geometry->setDrawingMode(GL_POINTS);
QSGGeometry * geometry = new QSGGeometry(LocationCirclePoint2D_AttributeSet, 4);
geometry->setDrawingMode(GL_TRIANGLE_STRIP);
m_geometry_node->setGeometry(geometry);
m_geometry_node->setFlag(QSGNode::OwnsGeometry);
LocationCirclePoint2D * vertices = static_cast<LocationCirclePoint2D *>(geometry->vertexData());
float x, y;
if (location_circle_data.visible()) {
QcVectorDouble screen_coordinate = m_viewport->coordinate_to_screen(location_circle_data.coordinate());
x = screen_coordinate.x();
y = screen_coordinate.y();
qInfo() << screen_coordinate;
} else {
x = .5 * m_viewport->width(); // Fixme: vector
y = .5 * m_viewport->height();
}
float accuracy_radius = m_viewport->to_px(location_circle_data.horizontal_precision());
constexpr float dot_radius_minimum = 10.;
constexpr float cone_scale_factor = 5.;
float dot_radius = qMax(accuracy_radius, dot_radius_minimum);
float radius = cone_scale_factor * dot_radius_minimum;
float margin = 10;
float size = radius + margin;
float angle = location_circle_data.bearing() + 90.; // North point to y
vertices[0].set(QcVectorDouble(x - size, y - size), QcVectorDouble(-size, -size), radius, dot_radius, accuracy_radius, angle);
vertices[1].set(QcVectorDouble(x - size, y + size), QcVectorDouble(-size, size), radius, dot_radius, accuracy_radius, angle);
vertices[2].set(QcVectorDouble(x + size, y - size), QcVectorDouble( size, -size), radius, dot_radius, accuracy_radius, angle);
vertices[3].set(QcVectorDouble(x + size, y + size), QcVectorDouble( size, size), radius, dot_radius, accuracy_radius, angle);
}
void QSGDefaultImageNode::updateGeometry()
{
Q_ASSERT(!m_targetRect.isEmpty());
const QSGTexture *t = m_material.texture();
if (!t) {
QSGGeometry *g = geometry();
g->allocate(4);
g->setDrawingMode(GL_TRIANGLE_STRIP);
memset(g->vertexData(), 0, g->sizeOfVertex() * 4);
} else {
QRectF sourceRect = t->normalizedTextureSubRect();
QRectF innerSourceRect(sourceRect.x() + m_innerSourceRect.x() * sourceRect.width(),
sourceRect.y() + m_innerSourceRect.y() * sourceRect.height(),
m_innerSourceRect.width() * sourceRect.width(),
m_innerSourceRect.height() * sourceRect.height());
bool hasMargins = m_targetRect != m_innerTargetRect;
int floorLeft = qFloor(m_subSourceRect.left());
int ceilRight = qCeil(m_subSourceRect.right());
int floorTop = qFloor(m_subSourceRect.top());
int ceilBottom = qCeil(m_subSourceRect.bottom());
int hTiles = ceilRight - floorLeft;
int vTiles = ceilBottom - floorTop;
bool hasTiles = hTiles != 1 || vTiles != 1;
bool fullTexture = innerSourceRect == QRectF(0, 0, 1, 1);
#ifdef QT_OPENGL_ES_2
QOpenGLContext *ctx = QOpenGLContext::currentContext();
bool npotSupported = ctx->functions()->hasOpenGLFeature(QOpenGLFunctions::NPOTTextureRepeat);
QSize size = t->textureSize();
bool isNpot = !isPowerOfTwo(size.width()) || !isPowerOfTwo(size.height());
bool wrapSupported = npotSupported || !isNpot;
#else
bool wrapSupported = true;
#endif
// An image can be rendered as a single quad if:
// - There are no margins, and either:
// - the image isn't repeated
// - the source rectangle fills the entire texture so that texture wrapping can be used,
// and NPOT is supported
if (!hasMargins && (!hasTiles || (fullTexture && wrapSupported))) {
QRectF sr;
if (!fullTexture) {
sr = QRectF(innerSourceRect.x() + (m_subSourceRect.left() - floorLeft) * innerSourceRect.width(),
innerSourceRect.y() + (m_subSourceRect.top() - floorTop) * innerSourceRect.height(),
m_subSourceRect.width() * innerSourceRect.width(),
m_subSourceRect.height() * innerSourceRect.height());
} else {
sr = QRectF(m_subSourceRect.left() - floorLeft, m_subSourceRect.top() - floorTop,
m_subSourceRect.width(), m_subSourceRect.height());
}
if (m_mirror) {
qreal oldLeft = sr.left();
sr.setLeft(sr.right());
sr.setRight(oldLeft);
}
if (m_antialiasing) {
QSGGeometry *g = geometry();
Q_ASSERT(g != &m_geometry);
g->allocate(8, 14);
g->setDrawingMode(GL_TRIANGLE_STRIP);
SmoothVertex *vertices = reinterpret_cast<SmoothVertex *>(g->vertexData());
float delta = float(qAbs(m_targetRect.width()) < qAbs(m_targetRect.height())
? m_targetRect.width() : m_targetRect.height()) * 0.5f;
float sx = float(sr.width() / m_targetRect.width());
float sy = float(sr.height() / m_targetRect.height());
for (int d = -1; d <= 1; d += 2) {
for (int j = 0; j < 2; ++j) {
for (int i = 0; i < 2; ++i, ++vertices) {
vertices->x = m_targetRect.x() + i * m_targetRect.width();
vertices->y = m_targetRect.y() + j * m_targetRect.height();
vertices->u = sr.x() + i * sr.width();
vertices->v = sr.y() + j * sr.height();
vertices->dx = (i == 0 ? delta : -delta) * d;
vertices->dy = (j == 0 ? delta : -delta) * d;
vertices->du = (d < 0 ? 0 : vertices->dx * sx);
vertices->dv = (d < 0 ? 0 : vertices->dy * sy);
}
}
}
Q_ASSERT(vertices - g->vertexCount() == g->vertexData());
static const quint16 indices[] = {
0, 4, 1, 5, 3, 7, 2, 6, 0, 4,
4, 6, 5, 7
};
Q_ASSERT(g->sizeOfIndex() * g->indexCount() == sizeof(indices));
memcpy(g->indexDataAsUShort(), indices, sizeof(indices));
} else {
m_geometry.allocate(4);
m_geometry.setDrawingMode(GL_TRIANGLE_STRIP);
QSGGeometry::updateTexturedRectGeometry(&m_geometry, m_targetRect, sr);
}
} else {
int hCells = hTiles;
int vCells = vTiles;
if (m_innerTargetRect.width() == 0)
hCells = 0;
if (m_innerTargetRect.left() != m_targetRect.left())
++hCells;
if (m_innerTargetRect.right() != m_targetRect.right())
++hCells;
if (m_innerTargetRect.height() == 0)
vCells = 0;
if (m_innerTargetRect.top() != m_targetRect.top())
++vCells;
if (m_innerTargetRect.bottom() != m_targetRect.bottom())
++vCells;
QVarLengthArray<X, 32> xData(2 * hCells);
QVarLengthArray<Y, 32> yData(2 * vCells);
X *xs = xData.data();
Y *ys = yData.data();
if (m_innerTargetRect.left() != m_targetRect.left()) {
xs[0].x = m_targetRect.left();
xs[0].tx = sourceRect.left();
xs[1].x = m_innerTargetRect.left();
xs[1].tx = innerSourceRect.left();
xs += 2;
}
if (m_innerTargetRect.width() != 0) {
xs[0].x = m_innerTargetRect.left();
xs[0].tx = innerSourceRect.x() + (m_subSourceRect.left() - floorLeft) * innerSourceRect.width();
++xs;
float b = m_innerTargetRect.width() / m_subSourceRect.width();
float a = m_innerTargetRect.x() - m_subSourceRect.x() * b;
for (int i = floorLeft + 1; i <= ceilRight - 1; ++i) {
xs[0].x = xs[1].x = a + b * i;
xs[0].tx = innerSourceRect.right();
xs[1].tx = innerSourceRect.left();
xs += 2;
}
xs[0].x = m_innerTargetRect.right();
xs[0].tx = innerSourceRect.x() + (m_subSourceRect.right() - ceilRight + 1) * innerSourceRect.width();
++xs;
}
if (m_innerTargetRect.right() != m_targetRect.right()) {
xs[0].x = m_innerTargetRect.right();
xs[0].tx = innerSourceRect.right();
xs[1].x = m_targetRect.right();
xs[1].tx = sourceRect.right();
xs += 2;
}
Q_ASSERT(xs == xData.data() + xData.size());
if (m_mirror) {
float leftPlusRight = m_targetRect.left() + m_targetRect.right();
int count = xData.size();
xs = xData.data();
for (int i = 0; i < count >> 1; ++i)
qSwap(xs[i], xs[count - 1 - i]);
for (int i = 0; i < count; ++i)
xs[i].x = leftPlusRight - xs[i].x;
}
if (m_innerTargetRect.top() != m_targetRect.top()) {
ys[0].y = m_targetRect.top();
ys[0].ty = sourceRect.top();
ys[1].y = m_innerTargetRect.top();
ys[1].ty = innerSourceRect.top();
ys += 2;
}
if (m_innerTargetRect.height() != 0) {
ys[0].y = m_innerTargetRect.top();
ys[0].ty = innerSourceRect.y() + (m_subSourceRect.top() - floorTop) * innerSourceRect.height();
++ys;
float b = m_innerTargetRect.height() / m_subSourceRect.height();
float a = m_innerTargetRect.y() - m_subSourceRect.y() * b;
for (int i = floorTop + 1; i <= ceilBottom - 1; ++i) {
ys[0].y = ys[1].y = a + b * i;
ys[0].ty = innerSourceRect.bottom();
ys[1].ty = innerSourceRect.top();
ys += 2;
}
ys[0].y = m_innerTargetRect.bottom();
ys[0].ty = innerSourceRect.y() + (m_subSourceRect.bottom() - ceilBottom + 1) * innerSourceRect.height();
++ys;
}
if (m_innerTargetRect.bottom() != m_targetRect.bottom()) {
ys[0].y = m_innerTargetRect.bottom();
ys[0].ty = innerSourceRect.bottom();
ys[1].y = m_targetRect.bottom();
ys[1].ty = sourceRect.bottom();
ys += 2;
}
Q_ASSERT(ys == yData.data() + yData.size());
if (m_antialiasing) {
QSGGeometry *g = geometry();
Q_ASSERT(g != &m_geometry);
g->allocate(hCells * vCells * 4 + (hCells + vCells - 1) * 4,
hCells * vCells * 6 + (hCells + vCells) * 12);
g->setDrawingMode(GL_TRIANGLES);
SmoothVertex *vertices = reinterpret_cast<SmoothVertex *>(g->vertexData());
memset(vertices, 0, g->vertexCount() * g->sizeOfVertex());
quint16 *indices = g->indexDataAsUShort();
// The deltas are how much the fuzziness can reach into the image.
// Only the border vertices are moved by the vertex shader, so the fuzziness
// can't reach further into the image than the closest interior vertices.
float leftDx = xData.at(1).x - xData.at(0).x;
float rightDx = xData.at(xData.size() - 1).x - xData.at(xData.size() - 2).x;
float topDy = yData.at(1).y - yData.at(0).y;
float bottomDy = yData.at(yData.size() - 1).y - yData.at(yData.size() - 2).y;
float leftDu = xData.at(1).tx - xData.at(0).tx;
float rightDu = xData.at(xData.size() - 1).tx - xData.at(xData.size() - 2).tx;
float topDv = yData.at(1).ty - yData.at(0).ty;
float bottomDv = yData.at(yData.size() - 1).ty - yData.at(yData.size() - 2).ty;
if (hCells == 1) {
leftDx = rightDx *= 0.5f;
leftDu = rightDu *= 0.5f;
}
if (vCells == 1) {
topDy = bottomDy *= 0.5f;
topDv = bottomDv *= 0.5f;
}
// This delta is how much the fuzziness can reach out from the image.
float delta = float(qAbs(m_targetRect.width()) < qAbs(m_targetRect.height())
? m_targetRect.width() : m_targetRect.height()) * 0.5f;
quint16 index = 0;
ys = yData.data();
for (int j = 0; j < vCells; ++j, ys += 2) {
xs = xData.data();
bool isTop = j == 0;
bool isBottom = j == vCells - 1;
for (int i = 0; i < hCells; ++i, xs += 2) {
bool isLeft = i == 0;
bool isRight = i == hCells - 1;
SmoothVertex *v = vertices + index;
quint16 topLeft = index;
for (int k = (isTop || isLeft ? 2 : 1); k--; ++v, ++index) {
v->x = xs[0].x;
v->u = xs[0].tx;
v->y = ys[0].y;
v->v = ys[0].ty;
}
quint16 topRight = index;
for (int k = (isTop || isRight ? 2 : 1); k--; ++v, ++index) {
v->x = xs[1].x;
v->u = xs[1].tx;
v->y = ys[0].y;
v->v = ys[0].ty;
}
quint16 bottomLeft = index;
for (int k = (isBottom || isLeft ? 2 : 1); k--; ++v, ++index) {
v->x = xs[0].x;
v->u = xs[0].tx;
v->y = ys[1].y;
v->v = ys[1].ty;
}
quint16 bottomRight = index;
for (int k = (isBottom || isRight ? 2 : 1); k--; ++v, ++index) {
v->x = xs[1].x;
v->u = xs[1].tx;
v->y = ys[1].y;
v->v = ys[1].ty;
}
appendQuad(&indices, topLeft, topRight, bottomLeft, bottomRight);
if (isTop) {
vertices[topLeft].dy = vertices[topRight].dy = topDy;
vertices[topLeft].dv = vertices[topRight].dv = topDv;
vertices[topLeft + 1].dy = vertices[topRight + 1].dy = -delta;
appendQuad(&indices, topLeft + 1, topRight + 1, topLeft, topRight);
}
if (isBottom) {
vertices[bottomLeft].dy = vertices[bottomRight].dy = -bottomDy;
vertices[bottomLeft].dv = vertices[bottomRight].dv = -bottomDv;
vertices[bottomLeft + 1].dy = vertices[bottomRight + 1].dy = delta;
appendQuad(&indices, bottomLeft, bottomRight, bottomLeft + 1, bottomRight + 1);
}
if (isLeft) {
vertices[topLeft].dx = vertices[bottomLeft].dx = leftDx;
vertices[topLeft].du = vertices[bottomLeft].du = leftDu;
vertices[topLeft + 1].dx = vertices[bottomLeft + 1].dx = -delta;
appendQuad(&indices, topLeft + 1, topLeft, bottomLeft + 1, bottomLeft);
}
if (isRight) {
vertices[topRight].dx = vertices[bottomRight].dx = -rightDx;
vertices[topRight].du = vertices[bottomRight].du = -rightDu;
vertices[topRight + 1].dx = vertices[bottomRight + 1].dx = delta;
appendQuad(&indices, topRight, topRight + 1, bottomRight, bottomRight + 1);
}
}
}
Q_ASSERT(index == g->vertexCount());
Q_ASSERT(indices - g->indexCount() == g->indexData());
} else {
m_geometry.allocate(hCells * vCells * 4, hCells * vCells * 6);
m_geometry.setDrawingMode(GL_TRIANGLES);
QSGGeometry::TexturedPoint2D *vertices = m_geometry.vertexDataAsTexturedPoint2D();
ys = yData.data();
for (int j = 0; j < vCells; ++j, ys += 2) {
xs = xData.data();
for (int i = 0; i < hCells; ++i, xs += 2) {
vertices[0].x = vertices[2].x = xs[0].x;
vertices[0].tx = vertices[2].tx = xs[0].tx;
vertices[1].x = vertices[3].x = xs[1].x;
vertices[1].tx = vertices[3].tx = xs[1].tx;
vertices[0].y = vertices[1].y = ys[0].y;
vertices[0].ty = vertices[1].ty = ys[0].ty;
vertices[2].y = vertices[3].y = ys[1].y;
vertices[2].ty = vertices[3].ty = ys[1].ty;
vertices += 4;
}
}
quint16 *indices = m_geometry.indexDataAsUShort();
for (int i = 0; i < 4 * vCells * hCells; i += 4)
appendQuad(&indices, i, i + 1, i + 2, i + 3);
}
}
}
markDirty(DirtyGeometry);
m_dirtyGeometry = false;
}
void QQuickShapeGenericRenderer::updateFillNode(ShapePathData *d, QQuickShapeGenericNode *node)
{
if (!node->m_fillNode)
return;
if (!(d->effectiveDirty & (DirtyFillGeom | DirtyColor | DirtyFillGradient)))
return;
// Make a copy of the data that will be accessed by the material on
// the render thread. This must be done even when we bail out below.
QQuickShapeGenericStrokeFillNode *n = node->m_fillNode;
updateShadowDataInNode(d, n);
QSGGeometry *g = n->geometry();
if (d->fillVertices.isEmpty()) {
if (g->vertexCount() || g->indexCount()) {
g->allocate(0, 0);
n->markDirty(QSGNode::DirtyGeometry);
}
return;
}
if (d->fillGradientActive) {
QQuickShapeGenericStrokeFillNode::Material gradMat;
switch (d->fillGradientActive) {
case LinearGradient:
gradMat = QQuickShapeGenericStrokeFillNode::MatLinearGradient;
break;
case RadialGradient:
gradMat = QQuickShapeGenericStrokeFillNode::MatRadialGradient;
break;
case ConicalGradient:
gradMat = QQuickShapeGenericStrokeFillNode::MatConicalGradient;
break;
default:
Q_UNREACHABLE();
}
n->activateMaterial(m_item->window(), gradMat);
if (d->effectiveDirty & DirtyFillGradient) {
// Gradients are implemented via a texture-based material.
n->markDirty(QSGNode::DirtyMaterial);
// stop here if only the gradient changed; no need to touch the geometry
if (!(d->effectiveDirty & DirtyFillGeom))
return;
}
} else {
n->activateMaterial(m_item->window(), QQuickShapeGenericStrokeFillNode::MatSolidColor);
// fast path for updating only color values when no change in vertex positions
if ((d->effectiveDirty & DirtyColor) && !(d->effectiveDirty & DirtyFillGeom)) {
ColoredVertex *vdst = reinterpret_cast<ColoredVertex *>(g->vertexData());
for (int i = 0; i < g->vertexCount(); ++i)
vdst[i].set(vdst[i].x, vdst[i].y, d->fillColor);
n->markDirty(QSGNode::DirtyGeometry);
return;
}
}
const int indexCount = d->indexType == QSGGeometry::UnsignedShortType
? d->fillIndices.count() * 2 : d->fillIndices.count();
if (g->indexType() != d->indexType) {
g = new QSGGeometry(QSGGeometry::defaultAttributes_ColoredPoint2D(),
d->fillVertices.count(), indexCount, d->indexType);
n->setGeometry(g);
} else {
g->allocate(d->fillVertices.count(), indexCount);
}
g->setDrawingMode(QSGGeometry::DrawTriangles);
memcpy(g->vertexData(), d->fillVertices.constData(), g->vertexCount() * g->sizeOfVertex());
memcpy(g->indexData(), d->fillIndices.constData(), g->indexCount() * g->sizeOfIndex());
n->markDirty(QSGNode::DirtyGeometry);
}
QQuickShaderEffectNode* QQuickCustomParticle::buildCustomNodes()
{
if (QOpenGLContext::currentContext()->isOpenGLES() && m_count * 4 > 0xffff) {
printf("CustomParticle: Too many particles... \n");
return 0;
}
if (m_count <= 0) {
printf("CustomParticle: Too few particles... \n");
return 0;
}
if (m_groups.isEmpty())
return 0;
QQuickShaderEffectNode *rootNode = 0;
QQuickShaderEffectMaterial *material = new QQuickShaderEffectMaterial;
m_dirtyProgram = true;
foreach (const QString &str, m_groups){
int gIdx = m_system->groupIds[str];
int count = m_system->groupData[gIdx]->size();
QQuickShaderEffectNode* node = new QQuickShaderEffectNode();
m_nodes.insert(gIdx, node);
node->setMaterial(material);
//Create Particle Geometry
int vCount = count * 4;
int iCount = count * 6;
QSGGeometry *g = new QSGGeometry(PlainParticle_AttributeSet, vCount, iCount);
g->setDrawingMode(GL_TRIANGLES);
node->setGeometry(g);
node->setFlag(QSGNode::OwnsGeometry, true);
PlainVertex *vertices = (PlainVertex *) g->vertexData();
for (int p=0; p < count; ++p) {
commit(gIdx, p);
vertices[0].tx = 0;
vertices[0].ty = 0;
vertices[1].tx = 1;
vertices[1].ty = 0;
vertices[2].tx = 0;
vertices[2].ty = 1;
vertices[3].tx = 1;
vertices[3].ty = 1;
vertices += 4;
}
quint16 *indices = g->indexDataAsUShort();
for (int i=0; i < count; ++i) {
int o = i * 4;
indices[0] = o;
indices[1] = o + 1;
indices[2] = o + 2;
indices[3] = o + 1;
indices[4] = o + 3;
indices[5] = o + 2;
indices += 6;
}
}
QSGGeometry *QSGBasicInternalImageNode::updateGeometry(const QRectF &targetRect,
const QRectF &innerTargetRect,
const QRectF &sourceRect,
const QRectF &innerSourceRect,
const QRectF &subSourceRect,
QSGGeometry *geometry,
bool mirror,
bool antialiasing)
{
int floorLeft = qFloor(subSourceRect.left());
int ceilRight = qCeil(subSourceRect.right());
int floorTop = qFloor(subSourceRect.top());
int ceilBottom = qCeil(subSourceRect.bottom());
int hTiles = ceilRight - floorLeft;
int vTiles = ceilBottom - floorTop;
int hCells = hTiles;
int vCells = vTiles;
if (innerTargetRect.width() == 0)
hCells = 0;
if (innerTargetRect.left() != targetRect.left())
++hCells;
if (innerTargetRect.right() != targetRect.right())
++hCells;
if (innerTargetRect.height() == 0)
vCells = 0;
if (innerTargetRect.top() != targetRect.top())
++vCells;
if (innerTargetRect.bottom() != targetRect.bottom())
++vCells;
QVarLengthArray<X, 32> xData(2 * hCells);
QVarLengthArray<Y, 32> yData(2 * vCells);
X *xs = xData.data();
Y *ys = yData.data();
if (innerTargetRect.left() != targetRect.left()) {
xs[0].x = targetRect.left();
xs[0].tx = sourceRect.left();
xs[1].x = innerTargetRect.left();
xs[1].tx = innerSourceRect.left();
xs += 2;
}
if (innerTargetRect.width() != 0) {
xs[0].x = innerTargetRect.left();
xs[0].tx = innerSourceRect.x() + (subSourceRect.left() - floorLeft) * innerSourceRect.width();
++xs;
float b = innerTargetRect.width() / subSourceRect.width();
float a = innerTargetRect.x() - subSourceRect.x() * b;
for (int i = floorLeft + 1; i <= ceilRight - 1; ++i) {
xs[0].x = xs[1].x = a + b * i;
xs[0].tx = innerSourceRect.right();
xs[1].tx = innerSourceRect.left();
xs += 2;
}
xs[0].x = innerTargetRect.right();
xs[0].tx = innerSourceRect.x() + (subSourceRect.right() - ceilRight + 1) * innerSourceRect.width();
++xs;
}
if (innerTargetRect.right() != targetRect.right()) {
xs[0].x = innerTargetRect.right();
xs[0].tx = innerSourceRect.right();
xs[1].x = targetRect.right();
xs[1].tx = sourceRect.right();
xs += 2;
}
Q_ASSERT(xs == xData.data() + xData.size());
if (mirror) {
float leftPlusRight = targetRect.left() + targetRect.right();
int count = xData.size();
xs = xData.data();
for (int i = 0; i < count >> 1; ++i)
qSwap(xs[i], xs[count - 1 - i]);
for (int i = 0; i < count; ++i)
xs[i].x = leftPlusRight - xs[i].x;
}
if (innerTargetRect.top() != targetRect.top()) {
ys[0].y = targetRect.top();
ys[0].ty = sourceRect.top();
ys[1].y = innerTargetRect.top();
ys[1].ty = innerSourceRect.top();
ys += 2;
}
if (innerTargetRect.height() != 0) {
ys[0].y = innerTargetRect.top();
ys[0].ty = innerSourceRect.y() + (subSourceRect.top() - floorTop) * innerSourceRect.height();
++ys;
float b = innerTargetRect.height() / subSourceRect.height();
float a = innerTargetRect.y() - subSourceRect.y() * b;
for (int i = floorTop + 1; i <= ceilBottom - 1; ++i) {
ys[0].y = ys[1].y = a + b * i;
ys[0].ty = innerSourceRect.bottom();
ys[1].ty = innerSourceRect.top();
ys += 2;
}
ys[0].y = innerTargetRect.bottom();
ys[0].ty = innerSourceRect.y() + (subSourceRect.bottom() - ceilBottom + 1) * innerSourceRect.height();
++ys;
}
if (innerTargetRect.bottom() != targetRect.bottom()) {
ys[0].y = innerTargetRect.bottom();
ys[0].ty = innerSourceRect.bottom();
ys[1].y = targetRect.bottom();
ys[1].ty = sourceRect.bottom();
ys += 2;
}
Q_ASSERT(ys == yData.data() + yData.size());
if (antialiasing) {
QSGGeometry *g = geometry;
Q_ASSERT(g);
g->allocate(hCells * vCells * 4 + (hCells + vCells - 1) * 4,
hCells * vCells * 6 + (hCells + vCells) * 12);
g->setDrawingMode(QSGGeometry::DrawTriangles);
SmoothVertex *vertices = reinterpret_cast<SmoothVertex *>(g->vertexData());
memset(vertices, 0, g->vertexCount() * g->sizeOfVertex());
quint16 *indices = g->indexDataAsUShort();
// The deltas are how much the fuzziness can reach into the image.
// Only the border vertices are moved by the vertex shader, so the fuzziness
// can't reach further into the image than the closest interior vertices.
float leftDx = xData.at(1).x - xData.at(0).x;
float rightDx = xData.at(xData.size() - 1).x - xData.at(xData.size() - 2).x;
float topDy = yData.at(1).y - yData.at(0).y;
float bottomDy = yData.at(yData.size() - 1).y - yData.at(yData.size() - 2).y;
float leftDu = xData.at(1).tx - xData.at(0).tx;
float rightDu = xData.at(xData.size() - 1).tx - xData.at(xData.size() - 2).tx;
float topDv = yData.at(1).ty - yData.at(0).ty;
float bottomDv = yData.at(yData.size() - 1).ty - yData.at(yData.size() - 2).ty;
if (hCells == 1) {
leftDx = rightDx *= 0.5f;
leftDu = rightDu *= 0.5f;
}
if (vCells == 1) {
topDy = bottomDy *= 0.5f;
topDv = bottomDv *= 0.5f;
}
// This delta is how much the fuzziness can reach out from the image.
float delta = float(qAbs(targetRect.width()) < qAbs(targetRect.height())
? targetRect.width() : targetRect.height()) * 0.5f;
quint16 index = 0;
ys = yData.data();
for (int j = 0; j < vCells; ++j, ys += 2) {
xs = xData.data();
bool isTop = j == 0;
bool isBottom = j == vCells - 1;
for (int i = 0; i < hCells; ++i, xs += 2) {
bool isLeft = i == 0;
bool isRight = i == hCells - 1;
SmoothVertex *v = vertices + index;
quint16 topLeft = index;
for (int k = (isTop || isLeft ? 2 : 1); k--; ++v, ++index) {
v->x = xs[0].x;
v->u = xs[0].tx;
v->y = ys[0].y;
v->v = ys[0].ty;
}
quint16 topRight = index;
for (int k = (isTop || isRight ? 2 : 1); k--; ++v, ++index) {
v->x = xs[1].x;
v->u = xs[1].tx;
v->y = ys[0].y;
v->v = ys[0].ty;
}
quint16 bottomLeft = index;
for (int k = (isBottom || isLeft ? 2 : 1); k--; ++v, ++index) {
v->x = xs[0].x;
v->u = xs[0].tx;
v->y = ys[1].y;
v->v = ys[1].ty;
}
quint16 bottomRight = index;
for (int k = (isBottom || isRight ? 2 : 1); k--; ++v, ++index) {
v->x = xs[1].x;
v->u = xs[1].tx;
v->y = ys[1].y;
v->v = ys[1].ty;
}
appendQuad(&indices, topLeft, topRight, bottomLeft, bottomRight);
if (isTop) {
vertices[topLeft].dy = vertices[topRight].dy = topDy;
vertices[topLeft].dv = vertices[topRight].dv = topDv;
vertices[topLeft + 1].dy = vertices[topRight + 1].dy = -delta;
appendQuad(&indices, topLeft + 1, topRight + 1, topLeft, topRight);
}
if (isBottom) {
vertices[bottomLeft].dy = vertices[bottomRight].dy = -bottomDy;
vertices[bottomLeft].dv = vertices[bottomRight].dv = -bottomDv;
vertices[bottomLeft + 1].dy = vertices[bottomRight + 1].dy = delta;
appendQuad(&indices, bottomLeft, bottomRight, bottomLeft + 1, bottomRight + 1);
}
if (isLeft) {
vertices[topLeft].dx = vertices[bottomLeft].dx = leftDx;
vertices[topLeft].du = vertices[bottomLeft].du = leftDu;
vertices[topLeft + 1].dx = vertices[bottomLeft + 1].dx = -delta;
appendQuad(&indices, topLeft + 1, topLeft, bottomLeft + 1, bottomLeft);
}
if (isRight) {
vertices[topRight].dx = vertices[bottomRight].dx = -rightDx;
vertices[topRight].du = vertices[bottomRight].du = -rightDu;
vertices[topRight + 1].dx = vertices[bottomRight + 1].dx = delta;
appendQuad(&indices, topRight, topRight + 1, bottomRight, bottomRight + 1);
}
}
}
Q_ASSERT(index == g->vertexCount());
Q_ASSERT(indices - g->indexCount() == g->indexData());
} else {
if (!geometry) {
geometry = new QSGGeometry(QSGGeometry::defaultAttributes_TexturedPoint2D(),
hCells * vCells * 4, hCells * vCells * 6,
QSGGeometry::UnsignedShortType);
} else {
geometry->allocate(hCells * vCells * 4, hCells * vCells * 6);
}
geometry->setDrawingMode(QSGGeometry::DrawTriangles);
QSGGeometry::TexturedPoint2D *vertices = geometry->vertexDataAsTexturedPoint2D();
ys = yData.data();
for (int j = 0; j < vCells; ++j, ys += 2) {
xs = xData.data();
for (int i = 0; i < hCells; ++i, xs += 2) {
vertices[0].x = vertices[2].x = xs[0].x;
vertices[0].tx = vertices[2].tx = xs[0].tx;
vertices[1].x = vertices[3].x = xs[1].x;
vertices[1].tx = vertices[3].tx = xs[1].tx;
vertices[0].y = vertices[1].y = ys[0].y;
vertices[0].ty = vertices[1].ty = ys[0].ty;
vertices[2].y = vertices[3].y = ys[1].y;
vertices[2].ty = vertices[3].ty = ys[1].ty;
vertices += 4;
}
}
quint16 *indices = geometry->indexDataAsUShort();
for (int i = 0; i < 4 * vCells * hCells; i += 4)
appendQuad(&indices, i, i + 1, i + 2, i + 3);
}
return geometry;
}
void QSGBasicInternalImageNode::updateGeometry()
{
Q_ASSERT(!m_targetRect.isEmpty());
const QSGTexture *t = materialTexture();
if (!t) {
QSGGeometry *g = geometry();
g->allocate(4);
g->setDrawingMode(QSGGeometry::DrawTriangleStrip);
memset(g->vertexData(), 0, g->sizeOfVertex() * 4);
} else {
QRectF sourceRect = t->normalizedTextureSubRect();
QRectF innerSourceRect(sourceRect.x() + m_innerSourceRect.x() * sourceRect.width(),
sourceRect.y() + m_innerSourceRect.y() * sourceRect.height(),
m_innerSourceRect.width() * sourceRect.width(),
m_innerSourceRect.height() * sourceRect.height());
bool hasMargins = m_targetRect != m_innerTargetRect;
int floorLeft = qFloor(m_subSourceRect.left());
int ceilRight = qCeil(m_subSourceRect.right());
int floorTop = qFloor(m_subSourceRect.top());
int ceilBottom = qCeil(m_subSourceRect.bottom());
int hTiles = ceilRight - floorLeft;
int vTiles = ceilBottom - floorTop;
bool hasTiles = hTiles != 1 || vTiles != 1;
bool fullTexture = innerSourceRect == QRectF(0, 0, 1, 1);
// An image can be rendered as a single quad if:
// - There are no margins, and either:
// - the image isn't repeated
// - the source rectangle fills the entire texture so that texture wrapping can be used,
// and NPOT is supported
if (!hasMargins && (!hasTiles || (fullTexture && supportsWrap(t->textureSize())))) {
QRectF sr;
if (!fullTexture) {
sr = QRectF(innerSourceRect.x() + (m_subSourceRect.left() - floorLeft) * innerSourceRect.width(),
innerSourceRect.y() + (m_subSourceRect.top() - floorTop) * innerSourceRect.height(),
m_subSourceRect.width() * innerSourceRect.width(),
m_subSourceRect.height() * innerSourceRect.height());
} else {
sr = QRectF(m_subSourceRect.left() - floorLeft, m_subSourceRect.top() - floorTop,
m_subSourceRect.width(), m_subSourceRect.height());
}
if (m_mirror) {
qreal oldLeft = sr.left();
sr.setLeft(sr.right());
sr.setRight(oldLeft);
}
if (m_antialiasing) {
QSGGeometry *g = geometry();
Q_ASSERT(g != &m_geometry);
g->allocate(8, 14);
g->setDrawingMode(QSGGeometry::DrawTriangleStrip);
SmoothVertex *vertices = reinterpret_cast<SmoothVertex *>(g->vertexData());
float delta = float(qAbs(m_targetRect.width()) < qAbs(m_targetRect.height())
? m_targetRect.width() : m_targetRect.height()) * 0.5f;
float sx = float(sr.width() / m_targetRect.width());
float sy = float(sr.height() / m_targetRect.height());
for (int d = -1; d <= 1; d += 2) {
for (int j = 0; j < 2; ++j) {
for (int i = 0; i < 2; ++i, ++vertices) {
vertices->x = m_targetRect.x() + i * m_targetRect.width();
vertices->y = m_targetRect.y() + j * m_targetRect.height();
vertices->u = sr.x() + i * sr.width();
vertices->v = sr.y() + j * sr.height();
vertices->dx = (i == 0 ? delta : -delta) * d;
vertices->dy = (j == 0 ? delta : -delta) * d;
vertices->du = (d < 0 ? 0 : vertices->dx * sx);
vertices->dv = (d < 0 ? 0 : vertices->dy * sy);
}
}
}
Q_ASSERT(vertices - g->vertexCount() == g->vertexData());
static const quint16 indices[] = {
0, 4, 1, 5, 3, 7, 2, 6, 0, 4,
4, 6, 5, 7
};
Q_ASSERT(g->sizeOfIndex() * g->indexCount() == sizeof(indices));
memcpy(g->indexDataAsUShort(), indices, sizeof(indices));
} else {
m_geometry.allocate(4);
m_geometry.setDrawingMode(QSGGeometry::DrawTriangleStrip);
QSGGeometry::updateTexturedRectGeometry(&m_geometry, m_targetRect, sr);
}
} else {
QSGGeometry *g = m_antialiasing ? geometry() : &m_geometry;
updateGeometry(m_targetRect, m_innerTargetRect,
sourceRect, innerSourceRect, m_subSourceRect,
g, m_mirror, m_antialiasing);
}
}
markDirty(DirtyGeometry);
m_dirtyGeometry = false;
}
QSGNode * DataSetView::updatePaintNode(QSGNode *oldNode, UpdatePaintNodeData *)
{
if (width() <= 0 || height() <= 0) {
delete oldNode;
return 0;
}
//if(recalculateCellSizes) calculateCellContentSizes();
const QRectF rect = boundingRect();
const int linesPerNode = 1000; //Or something? should be multiple of 2 though
if(!oldNode)
oldNode = new QSGNode();
QSGGeometryNode * currentNode = static_cast<QSGGeometryNode*>(oldNode->firstChild());
for(int lineIndex=0; lineIndex<_lines.size();)
{
if(currentNode == NULL)
{
currentNode = new QSGGeometryNode;
currentNode->setFlag(QSGNode::OwnsMaterial, false);
currentNode->setFlag(QSGNode::OwnsGeometry, true);
currentNode->setMaterial(&material);
oldNode->appendChildNode(currentNode);
}
int geomSize = std::min(linesPerNode, (int)(_lines.size() - lineIndex));
geomSize *= 2;
QSGGeometry *geometry = new QSGGeometry(QSGGeometry::defaultAttributes_Point2D(), geomSize);
geometry->setLineWidth(1);
geometry->setDrawingMode(GL_LINES);
QSGGeometry::Point2D *points = geometry->vertexDataAsPoint2D();
for(int geomIndex=0; geomIndex<geomSize; geomIndex+=2)
{
points[geomIndex ].x = _lines[lineIndex].first.x() + rect.left();
points[geomIndex ].y = _lines[lineIndex].first.y() + rect.top();
points[geomIndex+1].x = _lines[lineIndex].second.x() + rect.left();
points[geomIndex+1].y = _lines[lineIndex].second.y() + rect.top();
lineIndex++;
}
currentNode->setGeometry(geometry);
currentNode = static_cast<QSGGeometryNode*>(currentNode->nextSibling());
}
std::queue<QSGGeometryNode*> killThem;
while(currentNode != NULL) //superfluous children! Lets kill em
{
killThem.push(currentNode);
currentNode = static_cast<QSGGeometryNode*>(currentNode->nextSibling());
}
while(killThem.size() > 0)
{
QSGGeometryNode * childToDie = killThem.front();
killThem.pop();
delete childToDie;
}
return oldNode;
}
QSGNode *GraphConnection::updatePaintNode(QSGNode *oldNode, UpdatePaintNodeData *)
{
if (m_source == m_sink)
return oldNode;
QSGGeometryNode *node = 0;
QSGGeometry *geometry = 0;
QPointF p1, p2, p3, p4;
p1.setX(m_source.x());
p1.setY(m_source.y());
p4.setX(m_sink.x());
p4.setY(m_sink.y());
p2.setX(p1.x());
p3.setX(p4.x());
if (p1.y() < p4.y()) {
p2.setY(p1.y() * 0.75 + p4.y() * 0.25);
p3.setY(p4.y() * 0.75 + p1.y() * 0.25);
} else {
p2.setY(p1.y() - (p4.y()-p1.y())*0.25);
p3.setY(p4.y() + (p4.y()-p1.y())*0.25);
}
// quick 'n' dirty estimation of bezier length
// http://steve.hollasch.net/cgindex/curves/cbezarclen.html
qreal l1 = (QVector2D(p2)-QVector2D(p1)).length() +
(QVector2D(p3)-QVector2D(p2)).length() +
(QVector2D(p4)-QVector2D(p3)).length();
qreal l0 = (QVector2D(p4)-QVector2D(p1)).length();
qreal length = 0.5*l0 + 0.5*l1;
int segmentCount = length;
if (!oldNode) {
node = new QSGGeometryNode;
geometry = new QSGGeometry(QSGGeometry::defaultAttributes_Point2D(), segmentCount);
geometry->setLineWidth(2);
geometry->setDrawingMode(GL_LINE_STRIP);
node->setGeometry(geometry);
node->setFlag(QSGNode::OwnsGeometry);
QSGFlatColorMaterial *material = new QSGFlatColorMaterial;
material->setColor(QColor(0, 0, 0));
node->setMaterial(material);
node->setFlag(QSGNode::OwnsMaterial);
} else {
node = static_cast<QSGGeometryNode *>(oldNode);
geometry = node->geometry();
geometry->allocate(segmentCount);
}
QRectF bounds = boundingRect();
QSGGeometry::Point2D *vertices = geometry->vertexDataAsPoint2D();
for (int i = 0; i < segmentCount; ++i) {
qreal t = i / qreal(segmentCount - 1);
qreal invt = 1 - t;
// Bezier
QPointF pos = invt * invt * invt * p1
+ 3 * invt * invt * t * p2
+ 3 * invt * t * t * p3
+ t * t * t * p4;
float x = pos.x();
float y = pos.y();
vertices[i].set(x, y);
}
return node;
}
QSGNode* AudioBarSpectrumItem::updatePaintNode(QSGNode* oldNode, UpdatePaintNodeData*) {
if (!m_analyzer) return oldNode;
if (!isVisible()) return oldNode;
const std::vector<double>& points = m_analyzer->getSimplifiedSpectrum();
const double gain = m_agcEnabled ? m_analyzer->getAgcValue() : m_manualGain;
const int pointCount = points.size();
if (pointCount < 2) return oldNode;
// -------------------- Prepare QSG Nodes:
QSGNode* parentNode = nullptr;
if (oldNode) {
parentNode = static_cast<QSGNode*>(oldNode);
} else {
parentNode = new QSGNode;
}
// adapt child count:
int childCount = parentNode->childCount();
if (childCount != 2) {
parentNode->removeAllChildNodes();
QSGGeometryNode* node = new QSGGeometryNode;
QSGGeometry* geometry = new QSGGeometry(QSGGeometry::defaultAttributes_Point2D(), 3);
geometry->setDrawingMode(GL_TRIANGLE_STRIP);
node->setGeometry(geometry);
node->setFlag(QSGNode::OwnsGeometry);
QSGFlatColorMaterial* material = new QSGFlatColorMaterial;
material->setColor("#fff");
node->setMaterial(material);
node->setFlag(QSGNode::OwnsMaterial);
parentNode->appendChildNode(node);
// Attention: TODO: colors are swapped!
node = new QSGGeometryNode;
geometry = new QSGGeometry(QSGGeometry::defaultAttributes_Point2D(), 3);
geometry->setDrawingMode(GL_TRIANGLE_STRIP);
node->setGeometry(geometry);
node->setFlag(QSGNode::OwnsGeometry);
material = new QSGFlatColorMaterial;
material->setColor(m_color);
node->setMaterial(material);
node->setFlag(QSGNode::OwnsMaterial);
parentNode->appendChildNode(node);
}
QSGGeometryNode* const qsgNode = static_cast<QSGGeometryNode*>(parentNode->childAtIndex(0));
QSGGeometryNode* const qsgNodeOutline = static_cast<QSGGeometryNode*>(parentNode->childAtIndex(1));
if (!qsgNode || !qsgNodeOutline) {
qCritical() << "[SpectrumItem] Could not get QSG Node.";
return nullptr;
}
QSGGeometry* const geometry = qsgNode->geometry();
QSGGeometry* const geometryOutline = qsgNodeOutline->geometry();
if (!geometry || !geometryOutline) {
qCritical() << "[SpectrumItem] Could not get QSG Geometry.";
return nullptr;
}
const int verticesCount = pointCount * 7;
const int outlineVerticesCount = pointCount * 7;
geometry->allocate(verticesCount);
geometryOutline->allocate(outlineVerticesCount);
QSGGeometry::Point2D* const vertices = geometry->vertexDataAsPoint2D();
QSGGeometry::Point2D* const verticesOutline = geometryOutline->vertexDataAsPoint2D();
if (! vertices || !verticesOutline) {
qCritical() << "[SpectrumItem] Could not get QSG vertices.";
return nullptr;
}
const double itemWidth = width();
const double itemHeight = height();
const double barWidth = (itemWidth / pointCount) * 0.4;
const double spaceWidth = (itemWidth / pointCount) * 0.6;
const double endLineHeight = itemHeight / 100.0;
// draw spectrum:
for (int i = 0; i < pointCount; ++i) {
const float x = itemWidth * (i / float(pointCount));
const float y = itemHeight * (1 - points[i] * gain);
vertices[i*7].set(x, itemHeight);
vertices[i*7+1].set(x, y);
vertices[i*7+2].set(x + barWidth, itemHeight);
vertices[i*7+3].set(x + barWidth, y);
vertices[i*7+4].set(x + barWidth, itemHeight);
vertices[i*7+5].set(x + barWidth, itemHeight);
vertices[i*7+6].set(x + barWidth + spaceWidth, itemHeight);
const float y2 = qMin(itemHeight, itemHeight * (1 - points[i] * gain) + endLineHeight);
verticesOutline[i*7].set(x, itemHeight);
verticesOutline[i*7+1].set(x, y2);
verticesOutline[i*7+2].set(x + barWidth, itemHeight);
verticesOutline[i*7+3].set(x + barWidth, y2);
verticesOutline[i*7+4].set(x + barWidth, itemHeight);
verticesOutline[i*7+5].set(x + barWidth, itemHeight);
verticesOutline[i*7+6].set(x + barWidth + spaceWidth, itemHeight);
}
// tell Scene Graph that this items needs to be drawn:
qsgNode->markDirty(QSGNode::DirtyGeometry);
qsgNodeOutline->markDirty(QSGNode::DirtyGeometry);
return parentNode;
}
QSGNode* OMX_MediaProcessorElement::updatePaintNode(QSGNode*, UpdatePaintNodeData*)
{
if (!m_texProvider) {
m_texProvider = new OMX_TextureProviderQQuickItem(this);
m_mediaProc = new OMX_MediaProcessor(m_texProvider);
connect(m_mediaProc, SIGNAL(playbackCompleted()), this, SIGNAL(playbackCompleted()));
connect(m_mediaProc, SIGNAL(playbackStarted()), this, SIGNAL(playbackStarted()));
// Open if filepath is set.
// TODO: Handle errors.
if (!m_source.isNull()) {
//if (QFile(m_source).exists()) {
if (openMedia(m_source))
m_mediaProc->play();
//}
//else {
LOG_WARNING(LOG_TAG, "File does not exist.");
//}
}
}
return NULL;
#if 0
QSGGeometryNode* node = 0;
QSGGeometry* geometry = 0;
if (!oldNode) {
// Create the node.
node = new QSGGeometryNode;
geometry = new QSGGeometry(QSGGeometry::defaultAttributes_TexturedPoint2D(), 4);
geometry->setDrawingMode(GL_TRIANGLE_STRIP);
node->setGeometry(geometry);
node->setFlag(QSGNode::OwnsGeometry);
// TODO: Who is freeing this?
// TODO: I cannot know the texture size here.
QSGOpaqueTextureMaterial* material = new QSGOpaqueTextureMaterial;
m_sgtexture = new OMX_SGTexture(m_texture, QSize(1920, 1080));
material->setTexture(m_sgtexture);
node->setMaterial(material);
node->setFlag(QSGNode::OwnsMaterial);
#ifdef ENABLE_VIDEO_PROCESSOR
QPlatformNativeInterface* nativeInterface =
QGuiApplicationPrivate::platformIntegration()->nativeInterface();
Q_ASSERT(nativeInterface);
EGLDisplay eglDisplay = nativeInterface->nativeResourceForIntegration("egldisplay");
EGLContext eglContext = nativeInterface->nativeResourceForContext(
"eglcontext",
QOpenGLContext::currentContext()
);
#endif
// Provider MUST be built in this thread.
m_provider = new OMX_TextureProviderQQuickItem(this);
#ifdef ENABLE_VIDEO_PROCESSOR
m_videoProc = new OMX_VideoProcessor(eglDisplay, eglContext, m_provider);
connect(m_videoProc, SIGNAL(textureReady(uint)), this, SLOT(onTextureChanged(uint)));
if (!m_source.isNull())
m_videoProc->setVideoPath(m_source);
if (m_playScheduled) {
m_timer->start(30);
m_videoProc->play();
}
#elif ENABLE_MEDIA_PROCESSOR
LOG_VERBOSE(LOG_TAG, "Starting video using media processor...");
m_mediaProc = new OMX_MediaProcessor(m_provider);
m_mediaProc->setFilename("/home/pi/usb/Cars2.mkv", m_texture);
//if (m_playScheduled) {
m_timer->start(40);
m_mediaProc->play();
//}
#else
LOG_VERBOSE(LOG_TAG, "Starting video...");
QtConcurrent::run(&startVideo, m_provider, this);
m_timer->start(30);
#endif
}
else {
node = static_cast<QSGGeometryNode*>(oldNode);
geometry = node->geometry();
geometry->allocate(4);
// Update texture in the node if needed.
QSGOpaqueTextureMaterial* material = (QSGOpaqueTextureMaterial*)node->material();
if (m_texture != (GLuint)material->texture()->textureId()) {
// TODO: Does setTextureId frees the prev texture?
// TODO: I should the given the texture size.
LOG_ERROR(LOG_TAG, "Updating texture to %u!", m_texture);
material = new QSGOpaqueTextureMaterial;
m_sgtexture->setTexture(m_texture, QSize(1920, 1080));
}
}
// Create the vertices and map to texture.
QRectF bounds = boundingRect();
QSGGeometry::TexturedPoint2D* vertices = geometry->vertexDataAsTexturedPoint2D();
vertices[0].set(bounds.x(), bounds.y() + bounds.height(), 0.0f, 0.0f);
vertices[1].set(bounds.x() + bounds.width(), bounds.y() + bounds.height(), 1.0f, 0.0f);
vertices[2].set(bounds.x(), bounds.y(), 0.0f, 1.0f);
vertices[3].set(bounds.x() + bounds.width(), bounds.y(), 1.0f, 1.0f);
return node;
#endif
}
QSGNode* NodeConnectionLines::updatePaintNode(QSGNode* oldNode, UpdatePaintNodeData*) {
if (!m_nodeObject) return nullptr;
const QVector<QPointer<NodeBase>>& connectedNodes = m_nodeObject->getConnectedNodes();
int connectionCount = connectedNodes.size();
// -------------------- Prepare QSG Nodes:
QSGNode* parentNode = oldNode;
if (!oldNode) {
parentNode = new QSGNode();
} else {
// update color in case it changed:
// FIXME: is there a more efficient way to do this?
for (int i=0; i<parentNode->childCount(); ++i) {
QSGGeometryNode* childNode = static_cast<QSGGeometryNode*>(parentNode->childAtIndex(i));
if (!childNode) continue;
QSGFlatColorMaterial* material = static_cast<QSGFlatColorMaterial*>(childNode->material());
if (!material) continue;
material->setColor(m_color);
}
}
// adapt child count:
int childCount = parentNode->childCount();
if (childCount < connectionCount) {
for (int i=0; i<(connectionCount - childCount); ++i) {
QSGGeometryNode* node = new QSGGeometryNode;
QSGGeometry* geometry = new QSGGeometry(QSGGeometry::defaultAttributes_Point2D(), 3);
geometry->setDrawingMode(GL_TRIANGLE_STRIP);
node->setGeometry(geometry);
node->setFlag(QSGNode::OwnsGeometry);
QSGFlatColorMaterial* material = new QSGFlatColorMaterial;
material->setColor(m_color);
node->setMaterial(material);
node->setFlag(QSGNode::OwnsMaterial);
parentNode->appendChildNode(node);
}
} else if (childCount > connectionCount) {
for (int i=0; i<(childCount - connectionCount); ++i) {
parentNode->removeChildNode(parentNode->childAtIndex(0));
}
}
Q_ASSERT(parentNode->childCount() == connectionCount);
// calculate common start point:
const QPointF p0(width(), height() / 2);
double widthOffset = m_lineWidth / 2;
//const QPointF posInScene = mapToScene(QPointF(0, 0));
for (int i=0; i<connectionCount; ++i) {
NodeBase* otherNode = connectedNodes[i];
if (!otherNode) continue;
QQuickItem* otherGuiItem = otherNode->getGuiItem();
if (!otherGuiItem) continue;
const QPointF p3 = mapFromItem(otherGuiItem, QPointF(-otherGuiItem->width() / 2, otherGuiItem->height() / 2));
int handleLength = std::max(50, std::min(int(p3.x() - p0.x()), 80));
const QPointF p1(p0.x() + handleLength, p0.y());
const QPointF p2(p3.x() - handleLength, p3.y());
// calculate reasonable segment count:
int segmentCount = qMax(16.0, qMin(qAbs(p3.y() - p0.y()) / 25, 50.0));
int verticesCount = segmentCount * 2;
QSGGeometryNode* qsgNode = static_cast<QSGGeometryNode*>(parentNode->childAtIndex(i));
if (!qsgNode) continue;
QSGGeometry* geometry = qsgNode->geometry();
if (!geometry) continue;
geometry->allocate(verticesCount);
QSGGeometry::Point2D* vertices = geometry->vertexDataAsPoint2D();
// triangulate cubic bezier curve:
for (int i = 0; i < segmentCount; ++i) {
// t is the position on the line:
const qreal t = i / qreal(segmentCount - 1);
// pos is the point on the curve at "t":
const QPointF pos = calculateBezierPoint(t, p0, p1, p2, p3);
// normal is the normal vector at that point
const QPointF normal = normalFromTangent(calculateBezierTangent(t, p0, p1, p2, p3));
// first is a point offsetted in the normal direction by lineWidth / 2 from pos
const QPointF first = pos - normal * widthOffset;
// ssecond is a point offsetted in the negative normal direction by lineWidth / 2 from pos
const QPointF second = pos + normal * widthOffset;
// add first and second as vertices to this geometry:
vertices[i*2].set(first.x(), first.y());
vertices[i*2+1].set(second.x(), second.y());
}
// tell Scene Graph that this items needs to be drawn:
qsgNode->markDirty(QSGNode::DirtyGeometry);
}
return parentNode;
}