QgsRasterBlock *QgsHillshadeRenderer::block( int bandNo, const QgsRectangle &extent, int width, int height, QgsRasterBlockFeedback* feedback )
{
Q_UNUSED( bandNo );
QgsRasterBlock *outputBlock = new QgsRasterBlock();
if ( !mInput )
{
QgsDebugMsg( "No input raster!" );
return outputBlock;
}
QgsRasterBlock *inputBlock = mInput->block( mBand, extent, width, height, feedback );
if ( !inputBlock || inputBlock->isEmpty() )
{
QgsDebugMsg( "No raster data!" );
delete inputBlock;
return outputBlock;
}
QgsRasterBlock *alphaBlock = nullptr;
if ( mAlphaBand > 0 && mBand != mAlphaBand )
{
alphaBlock = mInput->block( mAlphaBand, extent, width, height, feedback );
if ( !alphaBlock || alphaBlock->isEmpty() )
{
// TODO: better to render without alpha
delete inputBlock;
delete alphaBlock;
return outputBlock;
}
}
else if ( mAlphaBand > 0 )
{
alphaBlock = inputBlock;
}
if ( !outputBlock->reset( Qgis::ARGB32_Premultiplied, width, height ) )
{
delete inputBlock;
delete alphaBlock;
return outputBlock;
}
double cellXSize = extent.width() / double( width );
double cellYSize = extent.height() / double( height );
double zenithRad = qMax( 0.0, 90 - mLightAngle ) * M_PI / 180.0;
double azimuthRad = -1 * mLightAzimuth * M_PI / 180.0;
double cosZenithRad = cos( zenithRad );
double sinZenithRad = sin( zenithRad );
// Multi direction hillshade: http://pubs.usgs.gov/of/1992/of92-422/of92-422.pdf
double angle0Rad = ( -1 * mLightAzimuth - 45 - 45 * 0.5 ) * M_PI / 180.0;
double angle1Rad = ( -1 * mLightAzimuth - 45 * 0.5 ) * M_PI / 180.0;
double angle2Rad = ( -1 * mLightAzimuth + 45 * 0.5 ) * M_PI / 180.0;
double angle3Rad = ( -1 * mLightAzimuth + 45 + 45 * 0.5 ) * M_PI / 180.0;
QRgb myDefaultColor = NODATA_COLOR;
for ( qgssize i = 0; i < ( qgssize )height; i++ )
{
for ( qgssize j = 0; j < ( qgssize )width; j++ )
{
if ( inputBlock->isNoData( i, j ) )
{
outputBlock->setColor( i, j, myDefaultColor );
continue;
}
qgssize iUp, iDown, jLeft, jRight;
if ( i == 0 )
{
iUp = i;
iDown = i + 1;
}
else if ( i < ( qgssize )height - 1 )
{
iUp = i - 1;
iDown = i + 1;
}
else
{
iUp = i - 1;
iDown = i;
}
if ( j == 0 )
{
jLeft = j;
jRight = j + 1;
}
else if ( j < ( qgssize )width - 1 )
{
jLeft = j - 1;
jRight = j + 1;
}
else
{
jLeft = j - 1;
jRight = j;
}
double x11;
double x21;
double x31;
double x12;
double x22; // Working cell
double x32;
double x13;
double x23;
double x33;
// This is center cell. It is not nodata. Use this in place of nodata neighbors
x22 = inputBlock->value( i, j );
x11 = inputBlock->isNoData( iUp, jLeft ) ? x22 : inputBlock->value( iUp, jLeft );
x21 = inputBlock->isNoData( i, jLeft ) ? x22 : inputBlock->value( i, jLeft );
x31 = inputBlock->isNoData( iDown, jLeft ) ? x22 : inputBlock->value( iDown, jLeft );
x12 = inputBlock->isNoData( iUp, j ) ? x22 : inputBlock->value( iUp, j );
// x22
x32 = inputBlock->isNoData( iDown, j ) ? x22 : inputBlock->value( iDown, j );
x13 = inputBlock->isNoData( iUp, jRight ) ? x22 : inputBlock->value( iUp, jRight );
x23 = inputBlock->isNoData( i, jRight ) ? x22 : inputBlock->value( i, jRight );
x33 = inputBlock->isNoData( iDown, jRight ) ? x22 : inputBlock->value( iDown, jRight );
double derX = calcFirstDerX( x11, x21, x31, x12, x22, x32, x13, x23, x33, cellXSize );
double derY = calcFirstDerY( x11, x21, x31, x12, x22, x32, x13, x23, x33, cellYSize );
double slopeRad = atan( mZFactor * sqrt( derX * derX + derY * derY ) );
double aspectRad = atan2( derX, -derY );
double grayValue;
if ( !mMultiDirectional )
{
// Standard single direction hillshade
grayValue = qBound( 0.0, 255.0 * ( cosZenithRad * cos( slopeRad )
+ sinZenithRad * sin( slopeRad )
* cos( azimuthRad - aspectRad ) ) , 255.0 );
}
else
{
// Weighted multi direction as in http://pubs.usgs.gov/of/1992/of92-422/of92-422.pdf
double weight0 = sin( aspectRad - angle0Rad );
double weight1 = sin( aspectRad - angle1Rad );
double weight2 = sin( aspectRad - angle2Rad );
double weight3 = sin( aspectRad - angle3Rad );
weight0 = weight0 * weight0;
weight1 = weight1 * weight1;
weight2 = weight2 * weight2;
weight3 = weight3 * weight3;
double cosSlope = cosZenithRad * cos( slopeRad );
double sinSlope = sinZenithRad * sin( slopeRad );
double color0 = cosSlope + sinSlope * cos( angle0Rad - aspectRad ) ;
double color1 = cosSlope + sinSlope * cos( angle1Rad - aspectRad ) ;
double color2 = cosSlope + sinSlope * cos( angle2Rad - aspectRad ) ;
double color3 = cosSlope + sinSlope * cos( angle3Rad - aspectRad ) ;
grayValue = qBound( 0.0, 255 * ( weight0 * color0 + weight1 * color1 + weight2 * color2 + weight3 * color3 ) * 0.5, 255.0 );
}
double currentAlpha = mOpacity;
if ( mRasterTransparency )
{
currentAlpha = mRasterTransparency->alphaValue( x22, mOpacity * 255 ) / 255.0;
}
if ( mAlphaBand > 0 )
{
currentAlpha *= alphaBlock->value( i ) / 255.0;
}
if ( qgsDoubleNear( currentAlpha, 1.0 ) )
{
outputBlock->setColor( i, j, qRgba( grayValue, grayValue, grayValue, 255 ) );
}
else
{
outputBlock->setColor( i, j, qRgba( currentAlpha * grayValue, currentAlpha * grayValue, currentAlpha * grayValue, currentAlpha * 255 ) );
}
}
}
delete inputBlock;
if ( mAlphaBand > 0 && mBand != mAlphaBand )
{
delete alphaBlock;
}
return outputBlock;
}
QgsRasterBlock* QgsSingleBandGrayRenderer::block( int bandNo, QgsRectangle const & extent, int width, int height )
{
Q_UNUSED( bandNo );
QgsDebugMsg( QString( "width = %1 height = %2" ).arg( width ).arg( height ) );
QgsRasterBlock *outputBlock = new QgsRasterBlock();
if ( !mInput )
{
return outputBlock;
}
QgsRasterBlock *inputBlock = mInput->block( mGrayBand, extent, width, height );
if ( !inputBlock || inputBlock->isEmpty() )
{
QgsDebugMsg( "No raster data!" );
delete inputBlock;
return outputBlock;
}
QgsRasterBlock *alphaBlock = 0;
if ( mAlphaBand > 0 && mGrayBand != mAlphaBand )
{
alphaBlock = mInput->block( mAlphaBand, extent, width, height );
if ( !alphaBlock || alphaBlock->isEmpty() )
{
// TODO: better to render without alpha
delete inputBlock;
delete alphaBlock;
return outputBlock;
}
}
else if ( mAlphaBand > 0 )
{
alphaBlock = inputBlock;
}
if ( !outputBlock->reset( QGis::ARGB32_Premultiplied, width, height ) )
{
delete inputBlock;
delete alphaBlock;
return outputBlock;
}
QRgb myDefaultColor = NODATA_COLOR;
for ( qgssize i = 0; i < ( qgssize )width*height; i++ )
{
if ( inputBlock->isNoData( i ) )
{
outputBlock->setColor( i, myDefaultColor );
continue;
}
double grayVal = inputBlock->value( i );
double currentAlpha = mOpacity;
if ( mRasterTransparency )
{
currentAlpha = mRasterTransparency->alphaValue( grayVal, mOpacity * 255 ) / 255.0;
}
if ( mAlphaBand > 0 )
{
currentAlpha *= alphaBlock->value( i ) / 255.0;
}
if ( mContrastEnhancement )
{
if ( !mContrastEnhancement->isValueInDisplayableRange( grayVal ) )
{
outputBlock->setColor( i, myDefaultColor );
continue;
}
grayVal = mContrastEnhancement->enhanceContrast( grayVal );
}
if ( mGradient == WhiteToBlack )
{
grayVal = 255 - grayVal;
}
if ( qgsDoubleNear( currentAlpha, 1.0 ) )
{
outputBlock->setColor( i, qRgba( grayVal, grayVal, grayVal, 255 ) );
}
else
{
outputBlock->setColor( i, qRgba( currentAlpha * grayVal, currentAlpha * grayVal, currentAlpha * grayVal, currentAlpha * 255 ) );
}
}
delete inputBlock;
if ( mAlphaBand > 0 && mGrayBand != mAlphaBand )
{
delete alphaBlock;
}
return outputBlock;
}
int QgsGrassGisLib::readRasterRow( int fd, void * buf, int row, RASTER_MAP_TYPE data_type, bool noDataAsZero )
{
if ( row < 0 || row >= mRows )
{
QgsDebugMsg( QString( "row %1 out of range 0 - %2" ).arg( row ).arg( mRows ) );
return 0;
}
// TODO: use cached block with more rows
Raster raster = mRasters.value( fd );
//if ( !raster.provider ) return -1;
if ( !raster.input ) return -1;
// Create extent for current row
QgsRectangle blockRect = mExtent;
double yRes = mExtent.height() / mRows;
double yMax = mExtent.yMaximum() - yRes * row;
//QgsDebugMsg( QString( "height = %1 mRows = %2" ).arg( mExtent.height() ).arg( mRows ) );
//QgsDebugMsg( QString( "row = %1 yRes = %2 yRes * row = %3" ).arg( row ).arg( yRes ).arg( yRes * row ) );
//QgsDebugMsg( QString( "mExtent.yMaximum() = %1 yMax = %2" ).arg( mExtent.yMaximum() ).arg( yMax ) );
blockRect.setYMaximum( yMax );
blockRect.setYMinimum( yMax - yRes );
QgsRasterBlock *block = raster.input->block( raster.band, blockRect, mColumns, 1 );
if ( !block ) return -1;
QGis::DataType requestedType = qgisRasterType( data_type );
//QgsDebugMsg( QString("data_type = %1").arg(data_type) );
//QgsDebugMsg( QString("requestedType = %1").arg(requestedType) );
//QgsDebugMsg( QString("requestedType size = %1").arg( QgsRasterBlock::typeSize( requestedType ) ) );
//QgsDebugMsg( QString("block->dataType = %1").arg( block->dataType() ) );
block->convert( requestedType );
memcpy( buf, block->bits( 0 ), QgsRasterBlock::typeSize( requestedType ) * mColumns );
for ( int i = 0; i < mColumns; i++ )
{
QgsDebugMsgLevel( QString( "row = %1 i = %2 val = %3 isNoData = %4" ).arg( row ).arg( i ).arg( block->value( i ) ).arg( block->isNoData( i ) ), 5 );
//(( CELL * ) buf )[i] = i;
if ( block->isNoData( 0, i ) )
{
if ( noDataAsZero )
{
switch ( data_type )
{
case CELL_TYPE:
G_zero(( char * ) &(( CELL * ) buf )[i], G_raster_size( data_type ) );
break;
case FCELL_TYPE:
G_zero(( char * ) &(( FCELL * ) buf )[i], G_raster_size( data_type ) );
break;
case DCELL_TYPE:
G_zero(( char * ) &(( DCELL * ) buf )[i], G_raster_size( data_type ) );
break;
default:
break;
}
}
else
{
switch ( data_type )
{
case CELL_TYPE:
G_set_c_null_value( &(( CELL * ) buf )[i], 1 );
break;
case FCELL_TYPE:
G_set_f_null_value( &(( FCELL * ) buf )[i], 1 );
break;
case DCELL_TYPE:
G_set_d_null_value( &(( DCELL * ) buf )[i], 1 );
break;
default:
break;
}
}
}
//else
//{
//memcpy( &( buf[i] ), block->bits( 0, i ), 4 );
//buf[i] = (int) block->value( 0, i);
//QgsDebugMsg( QString("buf[i] = %1").arg(buf[i]));
//}
}
delete block;
return 1;
}
QgsRasterBlock* QgsSingleBandPseudoColorRenderer::block( int bandNo, QgsRectangle const & extent, int width, int height, QgsRasterBlockFeedback* feedback )
{
Q_UNUSED( bandNo );
QgsRasterBlock *outputBlock = new QgsRasterBlock();
if ( !mInput || !mShader )
{
return outputBlock;
}
QgsRasterBlock *inputBlock = mInput->block( mBand, extent, width, height, feedback );
if ( !inputBlock || inputBlock->isEmpty() )
{
QgsDebugMsg( "No raster data!" );
delete inputBlock;
return outputBlock;
}
//rendering is faster without considering user-defined transparency
bool hasTransparency = usesTransparency();
QgsRasterBlock *alphaBlock = nullptr;
if ( mAlphaBand > 0 && mAlphaBand != mBand )
{
alphaBlock = mInput->block( mAlphaBand, extent, width, height, feedback );
if ( !alphaBlock || alphaBlock->isEmpty() )
{
delete inputBlock;
delete alphaBlock;
return outputBlock;
}
}
else if ( mAlphaBand == mBand )
{
alphaBlock = inputBlock;
}
if ( !outputBlock->reset( Qgis::ARGB32_Premultiplied, width, height ) )
{
delete inputBlock;
delete alphaBlock;
return outputBlock;
}
QRgb myDefaultColor = NODATA_COLOR;
for ( qgssize i = 0; i < ( qgssize )width*height; i++ )
{
if ( inputBlock->isNoData( i ) )
{
outputBlock->setColor( i, myDefaultColor );
continue;
}
double val = inputBlock->value( i );
int red, green, blue, alpha;
if ( !mShader->shade( val, &red, &green, &blue, &alpha ) )
{
outputBlock->setColor( i, myDefaultColor );
continue;
}
if ( alpha < 255 )
{
// Working with premultiplied colors, so multiply values by alpha
red *= ( alpha / 255.0 );
blue *= ( alpha / 255.0 );
green *= ( alpha / 255.0 );
}
if ( !hasTransparency )
{
outputBlock->setColor( i, qRgba( red, green, blue, alpha ) );
}
else
{
//opacity
double currentOpacity = mOpacity;
if ( mRasterTransparency )
{
currentOpacity = mRasterTransparency->alphaValue( val, mOpacity * 255 ) / 255.0;
}
if ( mAlphaBand > 0 )
{
currentOpacity *= alphaBlock->value( i ) / 255.0;
}
outputBlock->setColor( i, qRgba( currentOpacity * red, currentOpacity * green, currentOpacity * blue, currentOpacity * alpha ) );
}
}
delete inputBlock;
if ( mAlphaBand > 0 && mBand != mAlphaBand )
{
delete alphaBlock;
}
return outputBlock;
}
QgsRasterBlock * QgsRasterProjector::block( int bandNo, QgsRectangle const & extent, int width, int height )
{
QgsDebugMsg( QString( "extent:\n%1" ).arg( extent.toString() ) );
QgsDebugMsg( QString( "width = %1 height = %2" ).arg( width ).arg( height ) );
if ( !mInput )
{
QgsDebugMsg( "Input not set" );
return new QgsRasterBlock();
}
if ( ! mSrcCRS.isValid() || ! mDestCRS.isValid() || mSrcCRS == mDestCRS )
{
QgsDebugMsg( "No projection necessary" );
return mInput->block( bandNo, extent, width, height );
}
mDestExtent = extent;
mDestRows = height;
mDestCols = width;
calc();
QgsDebugMsg( QString( "srcExtent:\n%1" ).arg( srcExtent().toString() ) );
QgsDebugMsg( QString( "srcCols = %1 srcRows = %2" ).arg( srcCols() ).arg( srcRows() ) );
// If we zoom out too much, projector srcRows / srcCols maybe 0, which can cause problems in providers
if ( srcRows() <= 0 || srcCols() <= 0 )
{
QgsDebugMsg( "Zero srcRows or srcCols" );
return new QgsRasterBlock();
}
QgsRasterBlock *inputBlock = mInput->block( bandNo, srcExtent(), srcCols(), srcRows() );
if ( !inputBlock || inputBlock->isEmpty() )
{
QgsDebugMsg( "No raster data!" );
delete inputBlock;
return new QgsRasterBlock();
}
qgssize pixelSize = QgsRasterBlock::typeSize( mInput->dataType( bandNo ) );
QgsRasterBlock *outputBlock;
if ( inputBlock->hasNoDataValue() )
{
outputBlock = new QgsRasterBlock( inputBlock->dataType(), width, height, inputBlock->noDataValue() );
}
else
{
outputBlock = new QgsRasterBlock( inputBlock->dataType(), width, height );
}
if ( !outputBlock->isValid() )
{
QgsDebugMsg( "Cannot create block" );
delete inputBlock;
return outputBlock;
}
// set output to no data, it should be fast
outputBlock->setIsNoData();
// No data: because isNoData()/setIsNoData() is slow with respect to simple memcpy,
// we use if only if necessary:
// 1) no data value exists (numerical) -> memcpy, not necessary isNoData()/setIsNoData()
// 2) no data value does not exist but it may contain no data (numerical no data bitmap)
// -> must use isNoData()/setIsNoData()
// 3) no data are not used (no no data value, no no data bitmap) -> simple memcpy
// 4) image - simple memcpy
// To copy no data values stored in bitmaps we have to use isNoData()/setIsNoData(),
// we cannot fill output block with no data because we use memcpy for data, not setValue().
bool doNoData = !QgsRasterBlock::typeIsNumeric( inputBlock->dataType() ) && inputBlock->hasNoData() && !inputBlock->hasNoDataValue();
const QgsCoordinateTransform* inverseCt = nullptr;
if ( !mApproximate )
{
inverseCt = QgsCoordinateTransformCache::instance()->transform( mDestCRS.authid(), mSrcCRS.authid(), mDestDatumTransform, mSrcDatumTransform );
}
outputBlock->setIsNoData();
int srcRow, srcCol;
for ( int i = 0; i < height; ++i )
{
for ( int j = 0; j < width; ++j )
{
bool inside = srcRowCol( i, j, &srcRow, &srcCol, inverseCt );
if ( !inside ) continue; // we have everything set to no data
qgssize srcIndex = ( qgssize )srcRow * mSrcCols + srcCol;
QgsDebugMsgLevel( QString( "row = %1 col = %2 srcRow = %3 srcCol = %4" ).arg( i ).arg( j ).arg( srcRow ).arg( srcCol ), 5 );
// isNoData() may be slow so we check doNoData first
if ( doNoData && inputBlock->isNoData( srcRow, srcCol ) )
{
outputBlock->setIsNoData( i, j );
continue;
}
qgssize destIndex = ( qgssize )i * width + j;
char *srcBits = inputBlock->bits( srcIndex );
char *destBits = outputBlock->bits( destIndex );
if ( !srcBits )
{
QgsDebugMsg( QString( "Cannot get input block data: row = %1 col = %2" ).arg( i ).arg( j ) );
continue;
}
if ( !destBits )
{
QgsDebugMsg( QString( "Cannot set output block data: srcRow = %1 srcCol = %2" ).arg( srcRow ).arg( srcCol ) );
continue;
}
memcpy( destBits, srcBits, pixelSize );
outputBlock->setIsData( i, j );
}
}
delete inputBlock;
return outputBlock;
}
QgsRasterBlock * QgsPalettedRasterRenderer::block( int bandNo, QgsRectangle const & extent, int width, int height )
{
QgsRasterBlock *outputBlock = new QgsRasterBlock();
if ( !mInput )
{
return outputBlock;
}
QgsRasterBlock *inputBlock = mInput->block( bandNo, extent, width, height );
if ( !inputBlock || inputBlock->isEmpty() )
{
QgsDebugMsg( "No raster data!" );
delete inputBlock;
return outputBlock;
}
double currentOpacity = mOpacity;
//rendering is faster without considering user-defined transparency
bool hasTransparency = usesTransparency();
QgsRasterBlock *alphaBlock = 0;
if ( mAlphaBand > 0 && mAlphaBand != mBand )
{
alphaBlock = mInput->block( mAlphaBand, extent, width, height );
if ( !alphaBlock || alphaBlock->isEmpty() )
{
delete inputBlock;
delete alphaBlock;
return outputBlock;
}
}
else if ( mAlphaBand == mBand )
{
alphaBlock = inputBlock;
}
if ( !outputBlock->reset( QGis::ARGB32_Premultiplied, width, height ) )
{
delete inputBlock;
delete alphaBlock;
return outputBlock;
}
QRgb myDefaultColor = NODATA_COLOR;
//use direct data access instead of QgsRasterBlock::setValue
//because of performance
unsigned int* outputData = ( unsigned int* )( outputBlock->bits() );
qgssize rasterSize = ( qgssize )width * height;
for ( qgssize i = 0; i < rasterSize; ++i )
{
if ( inputBlock->isNoData( i ) )
{
outputData[i] = myDefaultColor;
continue;
}
int val = ( int ) inputBlock->value( i );
if ( !hasTransparency )
{
outputData[i] = mColors[val];
}
else
{
currentOpacity = mOpacity;
if ( mRasterTransparency )
{
currentOpacity = mRasterTransparency->alphaValue( val, mOpacity * 255 ) / 255.0;
}
if ( mAlphaBand > 0 )
{
currentOpacity *= alphaBlock->value( i ) / 255.0;
}
QColor currentColor = QColor( mColors[val] );
outputData[i] = qRgba( currentOpacity * currentColor.red(), currentOpacity * currentColor.green(), currentOpacity * currentColor.blue(), currentOpacity * 255 );
}
}
delete inputBlock;
if ( mAlphaBand > 0 && mBand != mAlphaBand )
{
delete alphaBlock;
}
return outputBlock;
}
QgsRasterBandStats QgsRasterInterface::bandStatistics( int theBandNo,
int theStats,
const QgsRectangle & theExtent,
int theSampleSize )
{
QgsDebugMsg( QString( "theBandNo = %1 theStats = %2 theSampleSize = %3" ).arg( theBandNo ).arg( theStats ).arg( theSampleSize ) );
// TODO: null values set on raster layer!!!
QgsRasterBandStats myRasterBandStats;
initStatistics( myRasterBandStats, theBandNo, theStats, theExtent, theSampleSize );
foreach ( QgsRasterBandStats stats, mStatistics )
{
if ( stats.contains( myRasterBandStats ) )
{
QgsDebugMsg( "Using cached statistics." );
return stats;
}
}
QgsRectangle myExtent = myRasterBandStats.extent;
int myWidth = myRasterBandStats.width;
int myHeight = myRasterBandStats.height;
//int myDataType = dataType( theBandNo );
int myXBlockSize = xBlockSize();
int myYBlockSize = yBlockSize();
if ( myXBlockSize == 0 ) // should not happen, but happens
{
myXBlockSize = 500;
}
if ( myYBlockSize == 0 ) // should not happen, but happens
{
myYBlockSize = 500;
}
int myNXBlocks = ( myWidth + myXBlockSize - 1 ) / myXBlockSize;
int myNYBlocks = ( myHeight + myYBlockSize - 1 ) / myYBlockSize;
double myXRes = myExtent.width() / myWidth;
double myYRes = myExtent.height() / myHeight;
// TODO: progress signals
// used by single pass stdev
double myMean = 0;
double mySumOfSquares = 0;
bool myFirstIterationFlag = true;
for ( int myYBlock = 0; myYBlock < myNYBlocks; myYBlock++ )
{
for ( int myXBlock = 0; myXBlock < myNXBlocks; myXBlock++ )
{
QgsDebugMsg( QString( "myYBlock = %1 myXBlock = %2" ).arg( myYBlock ).arg( myXBlock ) );
int myBlockWidth = qMin( myXBlockSize, myWidth - myXBlock * myXBlockSize );
int myBlockHeight = qMin( myYBlockSize, myHeight - myYBlock * myYBlockSize );
double xmin = myExtent.xMinimum() + myXBlock * myXBlockSize * myXRes;
double xmax = xmin + myBlockWidth * myXRes;
double ymin = myExtent.yMaximum() - myYBlock * myYBlockSize * myYRes;
double ymax = ymin - myBlockHeight * myYRes;
QgsRectangle myPartExtent( xmin, ymin, xmax, ymax );
QgsRasterBlock* blk = block( theBandNo, myPartExtent, myBlockWidth, myBlockHeight );
// Collect the histogram counts.
for ( qgssize i = 0; i < (( qgssize ) myBlockHeight ) * myBlockWidth; i++ )
{
if ( blk->isNoData( i ) ) continue; // NULL
double myValue = blk->value( i );
myRasterBandStats.sum += myValue;
myRasterBandStats.elementCount++;
if ( myFirstIterationFlag )
{
myFirstIterationFlag = false;
myRasterBandStats.minimumValue = myValue;
myRasterBandStats.maximumValue = myValue;
}
else
{
if ( myValue < myRasterBandStats.minimumValue )
{
myRasterBandStats.minimumValue = myValue;
}
if ( myValue > myRasterBandStats.maximumValue )
{
myRasterBandStats.maximumValue = myValue;
}
}
// Single pass stdev
double myDelta = myValue - myMean;
myMean += myDelta / myRasterBandStats.elementCount;
mySumOfSquares += myDelta * ( myValue - myMean );
}
delete blk;
}
}
myRasterBandStats.range = myRasterBandStats.maximumValue - myRasterBandStats.minimumValue;
myRasterBandStats.mean = myRasterBandStats.sum / myRasterBandStats.elementCount;
myRasterBandStats.sumOfSquares = mySumOfSquares; // OK with single pass?
// stdDev may differ from GDAL stats, because GDAL is using naive single pass
// algorithm which is more error prone (because of rounding errors)
// Divide result by sample size - 1 and get square root to get stdev
myRasterBandStats.stdDev = sqrt( mySumOfSquares / ( myRasterBandStats.elementCount - 1 ) );
QgsDebugMsg( "************ STATS **************" );
QgsDebugMsg( QString( "MIN %1" ).arg( myRasterBandStats.minimumValue ) );
QgsDebugMsg( QString( "MAX %1" ).arg( myRasterBandStats.maximumValue ) );
QgsDebugMsg( QString( "RANGE %1" ).arg( myRasterBandStats.range ) );
QgsDebugMsg( QString( "MEAN %1" ).arg( myRasterBandStats.mean ) );
QgsDebugMsg( QString( "STDDEV %1" ).arg( myRasterBandStats.stdDev ) );
myRasterBandStats.statsGathered = QgsRasterBandStats::All;
mStatistics.append( myRasterBandStats );
return myRasterBandStats;
}
QgsRasterHistogram QgsRasterInterface::histogram( int theBandNo,
int theBinCount,
double theMinimum, double theMaximum,
const QgsRectangle & theExtent,
int theSampleSize,
bool theIncludeOutOfRange )
{
QgsDebugMsg( QString( "theBandNo = %1 theBinCount = %2 theMinimum = %3 theMaximum = %4 theSampleSize = %5" ).arg( theBandNo ).arg( theBinCount ).arg( theMinimum ).arg( theMaximum ).arg( theSampleSize ) );
QgsRasterHistogram myHistogram;
initHistogram( myHistogram, theBandNo, theBinCount, theMinimum, theMaximum, theExtent, theSampleSize, theIncludeOutOfRange );
// Find cached
foreach ( QgsRasterHistogram histogram, mHistograms )
{
if ( histogram == myHistogram )
{
QgsDebugMsg( "Using cached histogram." );
return histogram;
}
}
int myBinCount = myHistogram.binCount;
int myWidth = myHistogram.width;
int myHeight = myHistogram.height;
QgsRectangle myExtent = myHistogram.extent;
myHistogram.histogramVector.resize( myBinCount );
int myXBlockSize = xBlockSize();
int myYBlockSize = yBlockSize();
if ( myXBlockSize == 0 ) // should not happen, but happens
{
myXBlockSize = 500;
}
if ( myYBlockSize == 0 ) // should not happen, but happens
{
myYBlockSize = 500;
}
int myNXBlocks = ( myWidth + myXBlockSize - 1 ) / myXBlockSize;
int myNYBlocks = ( myHeight + myYBlockSize - 1 ) / myYBlockSize;
double myXRes = myExtent.width() / myWidth;
double myYRes = myExtent.height() / myHeight;
double myMinimum = myHistogram.minimum;
double myMaximum = myHistogram.maximum;
// To avoid rounding errors
// TODO: check this
double myerval = ( myMaximum - myMinimum ) / myHistogram.binCount;
myMinimum -= 0.1 * myerval;
myMaximum += 0.1 * myerval;
QgsDebugMsg( QString( "binCount = %1 myMinimum = %2 myMaximum = %3" ).arg( myHistogram.binCount ).arg( myMinimum ).arg( myMaximum ) );
double myBinSize = ( myMaximum - myMinimum ) / myBinCount;
// TODO: progress signals
for ( int myYBlock = 0; myYBlock < myNYBlocks; myYBlock++ )
{
for ( int myXBlock = 0; myXBlock < myNXBlocks; myXBlock++ )
{
int myBlockWidth = qMin( myXBlockSize, myWidth - myXBlock * myXBlockSize );
int myBlockHeight = qMin( myYBlockSize, myHeight - myYBlock * myYBlockSize );
double xmin = myExtent.xMinimum() + myXBlock * myXBlockSize * myXRes;
double xmax = xmin + myBlockWidth * myXRes;
double ymin = myExtent.yMaximum() - myYBlock * myYBlockSize * myYRes;
double ymax = ymin - myBlockHeight * myYRes;
QgsRectangle myPartExtent( xmin, ymin, xmax, ymax );
QgsRasterBlock* blk = block( theBandNo, myPartExtent, myBlockWidth, myBlockHeight );
// Collect the histogram counts.
for ( qgssize i = 0; i < (( qgssize ) myBlockHeight ) * myBlockWidth; i++ )
{
if ( blk->isNoData( i ) )
{
continue; // NULL
}
double myValue = blk->value( i );
int myBinIndex = static_cast <int>( qFloor(( myValue - myMinimum ) / myBinSize ) ) ;
if (( myBinIndex < 0 || myBinIndex > ( myBinCount - 1 ) ) && !theIncludeOutOfRange )
{
continue;
}
if ( myBinIndex < 0 ) myBinIndex = 0;
if ( myBinIndex > ( myBinCount - 1 ) ) myBinIndex = myBinCount - 1;
myHistogram.histogramVector[myBinIndex] += 1;
myHistogram.nonNullCount++;
}
delete blk;
}
}
myHistogram.valid = true;
mHistograms.append( myHistogram );
#ifdef QGISDEBUG
QString hist;
for ( int i = 0; i < qMin( myHistogram.histogramVector.size(), 500 ); i++ )
{
hist += QString::number( myHistogram.histogramVector.value( i ) ) + " ";
}
QgsDebugMsg( "Histogram (max first 500 bins): " + hist );
#endif
return myHistogram;
}
QgsRasterBlock *QgsMultiBandColorRenderer::block( int bandNo, QgsRectangle const &extent, int width, int height, QgsRasterBlockFeedback *feedback )
{
Q_UNUSED( bandNo );
std::unique_ptr< QgsRasterBlock > outputBlock( new QgsRasterBlock() );
if ( !mInput )
{
return outputBlock.release();
}
//In some (common) cases, we can simplify the drawing loop considerably and save render time
bool fastDraw = ( !usesTransparency()
&& mRedBand > 0 && mGreenBand > 0 && mBlueBand > 0
&& mAlphaBand < 1 );
QSet<int> bands;
if ( mRedBand > 0 )
{
bands << mRedBand;
}
if ( mGreenBand > 0 )
{
bands << mGreenBand;
}
if ( mBlueBand > 0 )
{
bands << mBlueBand;
}
if ( bands.empty() )
{
// no need to draw anything if no band is set
// TODO:: we should probably return default color block
return outputBlock.release();
}
if ( mAlphaBand > 0 )
{
bands << mAlphaBand;
}
QMap<int, QgsRasterBlock *> bandBlocks;
QgsRasterBlock *defaultPointer = nullptr;
QSet<int>::const_iterator bandIt = bands.constBegin();
for ( ; bandIt != bands.constEnd(); ++bandIt )
{
bandBlocks.insert( *bandIt, defaultPointer );
}
QgsRasterBlock *redBlock = nullptr;
QgsRasterBlock *greenBlock = nullptr;
QgsRasterBlock *blueBlock = nullptr;
QgsRasterBlock *alphaBlock = nullptr;
bandIt = bands.constBegin();
for ( ; bandIt != bands.constEnd(); ++bandIt )
{
bandBlocks[*bandIt] = mInput->block( *bandIt, extent, width, height, feedback );
if ( !bandBlocks[*bandIt] )
{
// We should free the alloced mem from block().
QgsDebugMsg( QStringLiteral( "No input band" ) );
--bandIt;
for ( ; bandIt != bands.constBegin(); --bandIt )
{
delete bandBlocks[*bandIt];
}
return outputBlock.release();
}
}
if ( mRedBand > 0 )
{
redBlock = bandBlocks[mRedBand];
}
if ( mGreenBand > 0 )
{
greenBlock = bandBlocks[mGreenBand];
}
if ( mBlueBand > 0 )
{
blueBlock = bandBlocks[mBlueBand];
}
if ( mAlphaBand > 0 )
{
alphaBlock = bandBlocks[mAlphaBand];
}
if ( !outputBlock->reset( Qgis::ARGB32_Premultiplied, width, height ) )
{
for ( int i = 0; i < bandBlocks.size(); i++ )
{
delete bandBlocks.value( i );
}
return outputBlock.release();
}
QRgb *outputBlockColorData = outputBlock->colorData();
// faster data access to data for the common case that input data are coming from RGB image with 8-bit bands
bool hasByteRgb = ( redBlock && greenBlock && blueBlock && redBlock->dataType() == Qgis::Byte && greenBlock->dataType() == Qgis::Byte && blueBlock->dataType() == Qgis::Byte );
const quint8 *redData = nullptr, *greenData = nullptr, *blueData = nullptr;
if ( hasByteRgb )
{
redData = redBlock->byteData();
greenData = greenBlock->byteData();
blueData = blueBlock->byteData();
}
QRgb myDefaultColor = NODATA_COLOR;
if ( fastDraw )
{
// By default RGB raster layers have contrast enhancement assigned and normally that requires us to take the slow
// route that applies the enhancement. However if the algorithm type is "no enhancement" and all input bands are byte-sized,
// no transform would be applied to the input values and we can take the fast route.
bool hasEnhancement;
if ( hasByteRgb )
{
hasEnhancement =
( mRedContrastEnhancement && mRedContrastEnhancement->contrastEnhancementAlgorithm() != QgsContrastEnhancement::NoEnhancement ) ||
( mGreenContrastEnhancement && mGreenContrastEnhancement->contrastEnhancementAlgorithm() != QgsContrastEnhancement::NoEnhancement ) ||
( mBlueContrastEnhancement && mBlueContrastEnhancement->contrastEnhancementAlgorithm() != QgsContrastEnhancement::NoEnhancement );
}
else
{
hasEnhancement = mRedContrastEnhancement || mGreenContrastEnhancement || mBlueContrastEnhancement;
}
if ( hasEnhancement )
fastDraw = false;
}
qgssize count = ( qgssize )width * height;
for ( qgssize i = 0; i < count; i++ )
{
if ( fastDraw ) //fast rendering if no transparency, stretching, color inversion, etc.
{
if ( redBlock->isNoData( i ) ||
greenBlock->isNoData( i ) ||
blueBlock->isNoData( i ) )
{
outputBlock->setColor( i, myDefaultColor );
}
else
{
if ( hasByteRgb )
{
outputBlockColorData[i] = qRgb( redData[i], greenData[i], blueData[i] );
}
else
{
int redVal = static_cast<int>( redBlock->value( i ) );
int greenVal = static_cast<int>( greenBlock->value( i ) );
int blueVal = static_cast<int>( blueBlock->value( i ) );
outputBlockColorData[i] = qRgb( redVal, greenVal, blueVal );
}
}
continue;
}
bool isNoData = false;
double redVal = 0;
double greenVal = 0;
double blueVal = 0;
if ( mRedBand > 0 )
{
redVal = redBlock->value( i );
if ( redBlock->isNoData( i ) ) isNoData = true;
}
if ( !isNoData && mGreenBand > 0 )
{
greenVal = greenBlock->value( i );
if ( greenBlock->isNoData( i ) ) isNoData = true;
}
if ( !isNoData && mBlueBand > 0 )
{
blueVal = blueBlock->value( i );
if ( blueBlock->isNoData( i ) ) isNoData = true;
}
if ( isNoData )
{
outputBlock->setColor( i, myDefaultColor );
continue;
}
//apply default color if red, green or blue not in displayable range
if ( ( mRedContrastEnhancement && !mRedContrastEnhancement->isValueInDisplayableRange( redVal ) )
|| ( mGreenContrastEnhancement && !mGreenContrastEnhancement->isValueInDisplayableRange( redVal ) )
|| ( mBlueContrastEnhancement && !mBlueContrastEnhancement->isValueInDisplayableRange( redVal ) ) )
{
outputBlock->setColor( i, myDefaultColor );
continue;
}
//stretch color values
if ( mRedContrastEnhancement )
{
redVal = mRedContrastEnhancement->enhanceContrast( redVal );
}
if ( mGreenContrastEnhancement )
{
greenVal = mGreenContrastEnhancement->enhanceContrast( greenVal );
}
if ( mBlueContrastEnhancement )
{
blueVal = mBlueContrastEnhancement->enhanceContrast( blueVal );
}
//opacity
double currentOpacity = mOpacity;
if ( mRasterTransparency )
{
currentOpacity = mRasterTransparency->alphaValue( redVal, greenVal, blueVal, mOpacity * 255 ) / 255.0;
}
if ( mAlphaBand > 0 )
{
currentOpacity *= alphaBlock->value( i ) / 255.0;
}
if ( qgsDoubleNear( currentOpacity, 1.0 ) )
{
outputBlock->setColor( i, qRgba( redVal, greenVal, blueVal, 255 ) );
}
else
{
outputBlock->setColor( i, qRgba( currentOpacity * redVal, currentOpacity * greenVal, currentOpacity * blueVal, currentOpacity * 255 ) );
}
}
//delete input blocks
QMap<int, QgsRasterBlock *>::const_iterator bandDelIt = bandBlocks.constBegin();
for ( ; bandDelIt != bandBlocks.constEnd(); ++bandDelIt )
{
delete bandDelIt.value();
}
return outputBlock.release();
}
QgsRasterBlock * QgsRasterNuller::block( int bandNo, QgsRectangle const & extent, int width, int height )
{
QgsDebugMsg( "Entered" );
if ( !mInput )
{
return new QgsRasterBlock();
}
QgsRasterBlock *inputBlock = mInput->block( bandNo, extent, width, height );
if ( !inputBlock )
{
return new QgsRasterBlock();
}
// We don't support nuller for color types
if ( QgsRasterBlock::typeIsColor( inputBlock->dataType() ) )
{
return inputBlock;
}
QgsRasterBlock *outputBlock = 0;
if ( mHasOutputNoData.value( bandNo - 1 ) || inputBlock->hasNoDataValue() )
{
double noDataValue;
if ( mHasOutputNoData.value( bandNo - 1 ) )
{
noDataValue = mOutputNoData.value( bandNo - 1 );
}
else
{
noDataValue = inputBlock->noDataValue();
}
outputBlock = new QgsRasterBlock( inputBlock->dataType(), width, height, noDataValue );
}
else
{
outputBlock = new QgsRasterBlock( inputBlock->dataType(), width, height );
}
for ( int i = 0; i < height; i++ )
{
for ( int j = 0; j < width; j++ )
{
double value = inputBlock->value( i, j );
bool isNoData = inputBlock->isNoData( i, j );
if ( QgsRasterRange::contains( value, mNoData.value( bandNo - 1 ) ) )
{
isNoData = true;
}
outputBlock->setValue( i, j, inputBlock->value( i, j ) );
if ( isNoData )
{
outputBlock->setIsNoData( i, j );
}
else
{
outputBlock->setValue( i, j, value );
}
}
}
delete inputBlock;
return outputBlock;
}
bool QgsGrassRasterImport::import()
{
QgsDebugMsg( "entered" );
if ( !mPipe )
{
setError( "Pipe is null." );
return false;
}
QgsRasterDataProvider * provider = mPipe->provider();
if ( !provider )
{
setError( "Pipe has no provider." );
return false;
}
if ( !provider->isValid() )
{
setError( "Provider is not valid." );
return false;
}
int redBand = 0;
int greenBand = 0;
int blueBand = 0;
for ( int band = 1; band <= provider->bandCount(); band++ )
{
QgsDebugMsg( QString( "band = %1" ).arg( band ) );
int colorInterpretation = provider->colorInterpretation( band );
if ( colorInterpretation == QgsRaster::RedBand )
{
redBand = band;
}
else if ( colorInterpretation == QgsRaster::GreenBand )
{
greenBand = band;
}
else if ( colorInterpretation == QgsRaster::BlueBand )
{
blueBand = band;
}
QGis::DataType qgis_out_type = QGis::UnknownDataType;
RASTER_MAP_TYPE data_type = -1;
switch ( provider->dataType( band ) )
{
case QGis::Byte:
case QGis::UInt16:
case QGis::Int16:
case QGis::UInt32:
case QGis::Int32:
qgis_out_type = QGis::Int32;
break;
case QGis::Float32:
qgis_out_type = QGis::Float32;
break;
case QGis::Float64:
qgis_out_type = QGis::Float64;
break;
case QGis::ARGB32:
case QGis::ARGB32_Premultiplied:
qgis_out_type = QGis::Int32; // split to multiple bands?
break;
case QGis::CInt16:
case QGis::CInt32:
case QGis::CFloat32:
case QGis::CFloat64:
case QGis::UnknownDataType:
setError( tr( "Data type %1 not supported" ).arg( provider->dataType( band ) ) );
return false;
}
QgsDebugMsg( QString( "data_type = %1" ).arg( data_type ) );
QString module = QgsGrass::qgisGrassModulePath() + "/qgis.r.in";
QStringList arguments;
QString name = mGrassObject.name();
if ( provider->bandCount() > 1 )
{
// raster.<band> to keep in sync with r.in.gdal
name += QString( ".%1" ).arg( band );
}
arguments.append( "output=" + name ); // get list of all output names
QTemporaryFile gisrcFile;
QProcess* process = 0;
try
{
process = QgsGrass::startModule( mGrassObject.gisdbase(), mGrassObject.location(), mGrassObject.mapset(), module, arguments, gisrcFile );
}
catch ( QgsGrass::Exception &e )
{
setError( e.what() );
return false;
}
QDataStream outStream( process );
outStream << mExtent << ( qint32 )mXSize << ( qint32 )mYSize;
outStream << ( qint32 )qgis_out_type;
// calculate reasonable block size (5MB)
int maximumTileHeight = 5000000 / mXSize;
maximumTileHeight = std::max( 1, maximumTileHeight );
// smaller if reprojecting so that it can be canceled quickly
if ( mPipe->projector() )
{
maximumTileHeight = std::max( 1, 100000 / mXSize );
}
QgsRasterIterator iter( mPipe->last() );
iter.setMaximumTileWidth( mXSize );
iter.setMaximumTileHeight( maximumTileHeight );
iter.startRasterRead( band, mXSize, mYSize, mExtent );
int iterLeft = 0;
int iterTop = 0;
int iterCols = 0;
int iterRows = 0;
QgsRasterBlock* block = 0;
process->setReadChannel( QProcess::StandardOutput );
while ( iter.readNextRasterPart( band, iterCols, iterRows, &block, iterLeft, iterTop ) )
{
for ( int row = 0; row < iterRows; row++ )
{
if ( !block->convert( qgis_out_type ) )
{
setError( tr( "Cannot convert block (%1) to data type %2" ).arg( block->toString() ).arg( qgis_out_type ) );
delete block;
return false;
}
// prepare null values
double noDataValue;
if ( block->hasNoDataValue() )
{
noDataValue = block->noDataValue();
}
else
{
switch ( qgis_out_type )
{
case QGis::Int32:
noDataValue = -2147483648.0;
break;
case QGis::Float32:
noDataValue = std::numeric_limits<float>::max() * -1.0;
break;
case QGis::Float64:
noDataValue = std::numeric_limits<double>::max() * -1.0;
break;
default: // should not happen
noDataValue = std::numeric_limits<double>::max() * -1.0;
}
for ( qgssize i = 0; i < ( qgssize )block->width()*block->height(); i++ )
{
if ( block->isNoData( i ) )
{
block->setValue( i, noDataValue );
}
}
}
char * data = block->bits( row, 0 );
int size = iterCols * block->dataTypeSize();
QByteArray byteArray = QByteArray::fromRawData( data, size ); // does not copy data and does not take ownership
if ( isCanceled() )
{
outStream << true; // cancel module
break;
}
outStream << false; // not canceled
outStream << noDataValue;
outStream << byteArray;
// Without waitForBytesWritten() it does not finish ok on Windows (process timeout)
process->waitForBytesWritten( -1 );
#ifndef Q_OS_WIN
// wait until the row is written to allow quick cancel (don't send data to buffer)
process->waitForReadyRead();
bool result;
outStream >> result;
#endif
}
delete block;
if ( isCanceled() )
{
outStream << true; // cancel module
break;
}
}
// TODO: send something back from module and read it here to close map correctly in module
process->closeWriteChannel();
// TODO: best timeout?
process->waitForFinished( 30000 );
QString stdoutString = process->readAllStandardOutput().data();
QString stderrString = process->readAllStandardError().data();
QString processResult = QString( "exitStatus=%1, exitCode=%2, error=%3, errorString=%4 stdout=%5, stderr=%6" )
.arg( process->exitStatus() ).arg( process->exitCode() )
.arg( process->error() ).arg( process->errorString() )
.arg( stdoutString.replace( "\n", ", " ) ).arg( stderrString.replace( "\n", ", " ) );
QgsDebugMsg( "processResult: " + processResult );
if ( process->exitStatus() != QProcess::NormalExit )
{
setError( process->errorString() );
delete process;
return false;
}
if ( process->exitCode() != 0 )
{
setError( stderrString );
delete process;
return false;
}
delete process;
}
QgsDebugMsg( QString( "redBand = %1 greenBand = %2 blueBand = %3" ).arg( redBand ).arg( greenBand ).arg( blueBand ) );
if ( redBand > 0 && greenBand > 0 && blueBand > 0 )
{
// TODO: check if the group exists
// I_find_group()
QString name = mGrassObject.name();
G_TRY
{
QgsGrass::setMapset( mGrassObject.gisdbase(), mGrassObject.location(), mGrassObject.mapset() );
struct Ref ref;
I_get_group_ref( name.toUtf8().data(), &ref );
QString redName = name + QString( ".%1" ).arg( redBand );
QString greenName = name + QString( ".%1" ).arg( greenBand );
QString blueName = name + QString( ".%1" ).arg( blueBand );
I_add_file_to_group_ref( redName.toUtf8().data(), mGrassObject.mapset().toUtf8().data(), &ref );
I_add_file_to_group_ref( greenName.toUtf8().data(), mGrassObject.mapset().toUtf8().data(), &ref );
I_add_file_to_group_ref( blueName.toUtf8().data(), mGrassObject.mapset().toUtf8().data(), &ref );
I_put_group_ref( name.toUtf8().data(), &ref );
}
G_CATCH( QgsGrass::Exception &e )
{
QgsDebugMsg( QString( "Cannot create group: %1" ).arg( e.what() ) );
}
QgsRasterBlock *QgsHillshadeRenderer::block( int bandNo, const QgsRectangle &extent, int width, int height )
{
Q_UNUSED( bandNo );
QgsRasterBlock *outputBlock = new QgsRasterBlock();
if ( !mInput )
{
QgsDebugMsg( "No input raster!" );
return outputBlock;
}
QgsRasterBlock *inputBlock = mInput->block( mBand, extent, width, height );
if ( !inputBlock || inputBlock->isEmpty() )
{
QgsDebugMsg( "No raster data!" );
delete inputBlock;
return outputBlock;
}
if ( !outputBlock->reset( QGis::ARGB32_Premultiplied, width, height ) )
{
delete inputBlock;
return outputBlock;
}
double cellXSize = extent.width() / double( width );
double cellYSize = extent.height() / double( height );
double zenithRad = qMax( 0.0, 90 - mLightAngle ) * M_PI / 180.0;
double azimuthRad = -1 * mLightAzimuth * M_PI / 180.0;
double cosZenithRad = cos( zenithRad );
double sinZenithRad = sin( zenithRad );
QRgb myDefaultColor = NODATA_COLOR;
for ( qgssize i = 0; i < ( qgssize )height; i++ )
{
for ( qgssize j = 0; j < ( qgssize )width; j++ )
{
if ( inputBlock->isNoData( i, j ) )
{
outputBlock->setColor( i, j, myDefaultColor );
continue;
}
qgssize iUp, iDown, jLeft, jRight;
if ( i == 0 )
{
iUp = i;
iDown = i + 1;
}
else if ( i < ( qgssize )height - 1 )
{
iUp = i - 1;
iDown = i + 1;
}
else
{
iUp = i - 1;
iDown = i;
}
if ( j == 0 )
{
jLeft = j;
jRight = j + 1;
}
else if ( j < ( qgssize )width - 1 )
{
jLeft = j - 1;
jRight = j + 1;
}
else
{
jLeft = j - 1;
jRight = j;
}
double x11;
double x21;
double x31;
double x12;
double x22; // Working cell
double x32;
double x13;
double x23;
double x33;
// This is center cell. It is not nodata. Use this in place of nodata neighbors
x22 = inputBlock->value( i, j );
x11 = inputBlock->isNoData( iUp, jLeft ) ? x22 : inputBlock->value( iUp, jLeft );
x21 = inputBlock->isNoData( i, jLeft ) ? x22 : inputBlock->value( i, jLeft );
x31 = inputBlock->isNoData( iDown, jLeft ) ? x22 : inputBlock->value( iDown, jLeft );
x12 = inputBlock->isNoData( iUp, j ) ? x22 : inputBlock->value( iUp, j );
// x22
x32 = inputBlock->isNoData( iDown, j ) ? x22 : inputBlock->value( iDown, j );
x13 = inputBlock->isNoData( iUp, jRight ) ? x22 : inputBlock->value( iUp, jRight );
x23 = inputBlock->isNoData( i, jRight ) ? x22 : inputBlock->value( i, jRight );
x33 = inputBlock->isNoData( iDown, jRight ) ? x22 : inputBlock->value( iDown, jRight );
double derX = calcFirstDerX( x11, x21, x31, x12, x22, x32, x13, x23, x33, cellXSize );
double derY = calcFirstDerY( x11, x21, x31, x12, x22, x32, x13, x23, x33, cellYSize );
double slope_rad = atan( mZFactor * sqrt( derX * derX + derY * derY ) );
double aspectRad = atan2( derX, -derY );
double colorvalue = qBound( 0.0, 255.0 * (( cosZenithRad * cos( slope_rad ) ) +
( sinZenithRad * sin( slope_rad ) *
cos( azimuthRad - aspectRad ) ) ), 255.0 );
outputBlock->setColor( i, j, qRgb( colorvalue, colorvalue, colorvalue ) );
}
}
return outputBlock;
}
QgsRasterBlock *QgsMultiBandColorRenderer::block( int bandNo, QgsRectangle const &extent, int width, int height, QgsRasterBlockFeedback *feedback )
{
Q_UNUSED( bandNo );
std::unique_ptr< QgsRasterBlock > outputBlock( new QgsRasterBlock() );
if ( !mInput )
{
return outputBlock.release();
}
//In some (common) cases, we can simplify the drawing loop considerably and save render time
bool fastDraw = ( !usesTransparency()
&& mRedBand > 0 && mGreenBand > 0 && mBlueBand > 0
&& mAlphaBand < 1 && !mRedContrastEnhancement && !mGreenContrastEnhancement && !mBlueContrastEnhancement );
QSet<int> bands;
if ( mRedBand > 0 )
{
bands << mRedBand;
}
if ( mGreenBand > 0 )
{
bands << mGreenBand;
}
if ( mBlueBand > 0 )
{
bands << mBlueBand;
}
if ( bands.size() < 1 )
{
// no need to draw anything if no band is set
// TODO:: we should probably return default color block
return outputBlock.release();
}
if ( mAlphaBand > 0 )
{
bands << mAlphaBand;
}
QMap<int, QgsRasterBlock *> bandBlocks;
QgsRasterBlock *defaultPointer = nullptr;
QSet<int>::const_iterator bandIt = bands.constBegin();
for ( ; bandIt != bands.constEnd(); ++bandIt )
{
bandBlocks.insert( *bandIt, defaultPointer );
}
QgsRasterBlock *redBlock = nullptr;
QgsRasterBlock *greenBlock = nullptr;
QgsRasterBlock *blueBlock = nullptr;
QgsRasterBlock *alphaBlock = nullptr;
bandIt = bands.constBegin();
for ( ; bandIt != bands.constEnd(); ++bandIt )
{
bandBlocks[*bandIt] = mInput->block( *bandIt, extent, width, height, feedback );
if ( !bandBlocks[*bandIt] )
{
// We should free the alloced mem from block().
QgsDebugMsg( "No input band" );
--bandIt;
for ( ; bandIt != bands.constBegin(); --bandIt )
{
delete bandBlocks[*bandIt];
}
return outputBlock.release();
}
}
if ( mRedBand > 0 )
{
redBlock = bandBlocks[mRedBand];
}
if ( mGreenBand > 0 )
{
greenBlock = bandBlocks[mGreenBand];
}
if ( mBlueBand > 0 )
{
blueBlock = bandBlocks[mBlueBand];
}
if ( mAlphaBand > 0 )
{
alphaBlock = bandBlocks[mAlphaBand];
}
if ( !outputBlock->reset( Qgis::ARGB32_Premultiplied, width, height ) )
{
for ( int i = 0; i < bandBlocks.size(); i++ )
{
delete bandBlocks.value( i );
}
return outputBlock.release();
}
QRgb myDefaultColor = NODATA_COLOR;
for ( qgssize i = 0; i < ( qgssize )width * height; i++ )
{
if ( fastDraw ) //fast rendering if no transparency, stretching, color inversion, etc.
{
if ( redBlock->isNoData( i ) ||
greenBlock->isNoData( i ) ||
blueBlock->isNoData( i ) )
{
outputBlock->setColor( i, myDefaultColor );
}
else
{
int redVal = ( int )redBlock->value( i );
int greenVal = ( int )greenBlock->value( i );
int blueVal = ( int )blueBlock->value( i );
outputBlock->setColor( i, qRgba( redVal, greenVal, blueVal, 255 ) );
}
continue;
}
bool isNoData = false;
double redVal = 0;
double greenVal = 0;
double blueVal = 0;
if ( mRedBand > 0 )
{
redVal = redBlock->value( i );
if ( redBlock->isNoData( i ) ) isNoData = true;
}
if ( !isNoData && mGreenBand > 0 )
{
greenVal = greenBlock->value( i );
if ( greenBlock->isNoData( i ) ) isNoData = true;
}
if ( !isNoData && mBlueBand > 0 )
{
blueVal = blueBlock->value( i );
if ( blueBlock->isNoData( i ) ) isNoData = true;
}
if ( isNoData )
{
outputBlock->setColor( i, myDefaultColor );
continue;
}
//apply default color if red, green or blue not in displayable range
if ( ( mRedContrastEnhancement && !mRedContrastEnhancement->isValueInDisplayableRange( redVal ) )
|| ( mGreenContrastEnhancement && !mGreenContrastEnhancement->isValueInDisplayableRange( redVal ) )
|| ( mBlueContrastEnhancement && !mBlueContrastEnhancement->isValueInDisplayableRange( redVal ) ) )
{
outputBlock->setColor( i, myDefaultColor );
continue;
}
//stretch color values
if ( mRedContrastEnhancement )
{
redVal = mRedContrastEnhancement->enhanceContrast( redVal );
}
if ( mGreenContrastEnhancement )
{
greenVal = mGreenContrastEnhancement->enhanceContrast( greenVal );
}
if ( mBlueContrastEnhancement )
{
blueVal = mBlueContrastEnhancement->enhanceContrast( blueVal );
}
//opacity
double currentOpacity = mOpacity;
if ( mRasterTransparency )
{
currentOpacity = mRasterTransparency->alphaValue( redVal, greenVal, blueVal, mOpacity * 255 ) / 255.0;
}
if ( mAlphaBand > 0 )
{
currentOpacity *= alphaBlock->value( i ) / 255.0;
}
if ( qgsDoubleNear( currentOpacity, 1.0 ) )
{
outputBlock->setColor( i, qRgba( redVal, greenVal, blueVal, 255 ) );
}
else
{
outputBlock->setColor( i, qRgba( currentOpacity * redVal, currentOpacity * greenVal, currentOpacity * blueVal, currentOpacity * 255 ) );
}
}
//delete input blocks
QMap<int, QgsRasterBlock *>::const_iterator bandDelIt = bandBlocks.constBegin();
for ( ; bandDelIt != bandBlocks.constEnd(); ++bandDelIt )
{
delete bandDelIt.value();
}
return outputBlock.release();
}