QgsRasterBlock *QgsRasterDataProvider::block( int bandNo, QgsRectangle const &boundingBox, int width, int height, QgsRasterBlockFeedback *feedback )
{
QgsDebugMsgLevel( QString( "bandNo = %1 width = %2 height = %3" ).arg( bandNo ).arg( width ).arg( height ), 4 );
QgsDebugMsgLevel( QString( "boundingBox = %1" ).arg( boundingBox.toString() ), 4 );
QgsRasterBlock *block = new QgsRasterBlock( dataType( bandNo ), width, height );
if ( sourceHasNoDataValue( bandNo ) && useSourceNoDataValue( bandNo ) )
{
block->setNoDataValue( sourceNoDataValue( bandNo ) );
}
if ( block->isEmpty() )
{
QgsDebugMsg( "Couldn't create raster block" );
return block;
}
// Read necessary extent only
QgsRectangle tmpExtent = extent().intersect( &boundingBox );
if ( tmpExtent.isEmpty() )
{
QgsDebugMsg( "Extent outside provider extent" );
block->setIsNoData();
return block;
}
double xRes = boundingBox.width() / width;
double yRes = boundingBox.height() / height;
double tmpXRes, tmpYRes;
double providerXRes = 0;
double providerYRes = 0;
if ( capabilities() & Size )
{
providerXRes = extent().width() / xSize();
providerYRes = extent().height() / ySize();
tmpXRes = std::max( providerXRes, xRes );
tmpYRes = std::max( providerYRes, yRes );
if ( qgsDoubleNear( tmpXRes, xRes ) ) tmpXRes = xRes;
if ( qgsDoubleNear( tmpYRes, yRes ) ) tmpYRes = yRes;
}
else
{
tmpXRes = xRes;
tmpYRes = yRes;
}
if ( tmpExtent != boundingBox ||
tmpXRes > xRes || tmpYRes > yRes )
{
// Read smaller extent or lower resolution
if ( !extent().contains( boundingBox ) )
{
QRect subRect = QgsRasterBlock::subRect( boundingBox, width, height, extent() );
block->setIsNoDataExcept( subRect );
}
// Calculate row/col limits (before tmpExtent is aligned)
int fromRow = std::round( ( boundingBox.yMaximum() - tmpExtent.yMaximum() ) / yRes );
int toRow = std::round( ( boundingBox.yMaximum() - tmpExtent.yMinimum() ) / yRes ) - 1;
int fromCol = std::round( ( tmpExtent.xMinimum() - boundingBox.xMinimum() ) / xRes );
int toCol = std::round( ( tmpExtent.xMaximum() - boundingBox.xMinimum() ) / xRes ) - 1;
QgsDebugMsgLevel( QString( "fromRow = %1 toRow = %2 fromCol = %3 toCol = %4" ).arg( fromRow ).arg( toRow ).arg( fromCol ).arg( toCol ), 4 );
if ( fromRow < 0 || fromRow >= height || toRow < 0 || toRow >= height ||
fromCol < 0 || fromCol >= width || toCol < 0 || toCol >= width )
{
// Should not happen
QgsDebugMsg( "Row or column limits out of range" );
return block;
}
// If lower source resolution is used, the extent must beS aligned to original
// resolution to avoid possible shift due to resampling
if ( tmpXRes > xRes )
{
int col = std::floor( ( tmpExtent.xMinimum() - extent().xMinimum() ) / providerXRes );
tmpExtent.setXMinimum( extent().xMinimum() + col * providerXRes );
col = std::ceil( ( tmpExtent.xMaximum() - extent().xMinimum() ) / providerXRes );
tmpExtent.setXMaximum( extent().xMinimum() + col * providerXRes );
}
if ( tmpYRes > yRes )
{
int row = std::floor( ( extent().yMaximum() - tmpExtent.yMaximum() ) / providerYRes );
tmpExtent.setYMaximum( extent().yMaximum() - row * providerYRes );
row = std::ceil( ( extent().yMaximum() - tmpExtent.yMinimum() ) / providerYRes );
tmpExtent.setYMinimum( extent().yMaximum() - row * providerYRes );
}
int tmpWidth = std::round( tmpExtent.width() / tmpXRes );
int tmpHeight = std::round( tmpExtent.height() / tmpYRes );
tmpXRes = tmpExtent.width() / tmpWidth;
tmpYRes = tmpExtent.height() / tmpHeight;
QgsDebugMsgLevel( QString( "Reading smaller block tmpWidth = %1 height = %2" ).arg( tmpWidth ).arg( tmpHeight ), 4 );
QgsDebugMsgLevel( QString( "tmpExtent = %1" ).arg( tmpExtent.toString() ), 4 );
QgsRasterBlock *tmpBlock = new QgsRasterBlock( dataType( bandNo ), tmpWidth, tmpHeight );
if ( sourceHasNoDataValue( bandNo ) && useSourceNoDataValue( bandNo ) )
{
tmpBlock->setNoDataValue( sourceNoDataValue( bandNo ) );
}
readBlock( bandNo, tmpExtent, tmpWidth, tmpHeight, tmpBlock->bits(), feedback );
int pixelSize = dataTypeSize( bandNo );
double xMin = boundingBox.xMinimum();
double yMax = boundingBox.yMaximum();
double tmpXMin = tmpExtent.xMinimum();
double tmpYMax = tmpExtent.yMaximum();
for ( int row = fromRow; row <= toRow; row++ )
{
double y = yMax - ( row + 0.5 ) * yRes;
int tmpRow = std::floor( ( tmpYMax - y ) / tmpYRes );
for ( int col = fromCol; col <= toCol; col++ )
{
double x = xMin + ( col + 0.5 ) * xRes;
int tmpCol = std::floor( ( x - tmpXMin ) / tmpXRes );
if ( tmpRow < 0 || tmpRow >= tmpHeight || tmpCol < 0 || tmpCol >= tmpWidth )
{
QgsDebugMsg( "Source row or column limits out of range" );
block->setIsNoData(); // so that the problem becomes obvious and fixed
delete tmpBlock;
return block;
}
qgssize tmpIndex = static_cast< qgssize >( tmpRow ) * static_cast< qgssize >( tmpWidth ) + tmpCol;
qgssize index = row * static_cast< qgssize >( width ) + col;
char *tmpBits = tmpBlock->bits( tmpIndex );
char *bits = block->bits( index );
if ( !tmpBits )
{
QgsDebugMsg( QString( "Cannot get input block data tmpRow = %1 tmpCol = %2 tmpIndex = %3." ).arg( tmpRow ).arg( tmpCol ).arg( tmpIndex ) );
continue;
}
if ( !bits )
{
QgsDebugMsg( "Cannot set output block data." );
continue;
}
memcpy( bits, tmpBits, pixelSize );
}
}
delete tmpBlock;
}
else
{
readBlock( bandNo, boundingBox, width, height, block->bits(), feedback );
}
// apply scale and offset
block->applyScaleOffset( bandScale( bandNo ), bandOffset( bandNo ) );
// apply user no data values
block->applyNoDataValues( userNoDataValues( bandNo ) );
return block;
}
QgsRasterBlock * QgsRasterNuller::block( int bandNo, QgsRectangle const & extent, int width, int height )
{
QgsDebugMsg( "Entered" );
if ( !mInput )
{
return new QgsRasterBlock();
}
QgsRasterBlock *inputBlock = mInput->block( bandNo, extent, width, height );
if ( !inputBlock )
{
return new QgsRasterBlock();
}
// We don't support nuller for color types
if ( QgsRasterBlock::typeIsColor( inputBlock->dataType() ) )
{
return inputBlock;
}
QgsRasterBlock *outputBlock = 0;
if ( mHasOutputNoData.value( bandNo - 1 ) || inputBlock->hasNoDataValue() )
{
double noDataValue;
if ( mHasOutputNoData.value( bandNo - 1 ) )
{
noDataValue = mOutputNoData.value( bandNo - 1 );
}
else
{
noDataValue = inputBlock->noDataValue();
}
outputBlock = new QgsRasterBlock( inputBlock->dataType(), width, height, noDataValue );
}
else
{
outputBlock = new QgsRasterBlock( inputBlock->dataType(), width, height );
}
for ( int i = 0; i < height; i++ )
{
for ( int j = 0; j < width; j++ )
{
double value = inputBlock->value( i, j );
bool isNoData = inputBlock->isNoData( i, j );
if ( QgsRasterRange::contains( value, mNoData.value( bandNo - 1 ) ) )
{
isNoData = true;
}
outputBlock->setValue( i, j, inputBlock->value( i, j ) );
if ( isNoData )
{
outputBlock->setIsNoData( i, j );
}
else
{
outputBlock->setValue( i, j, value );
}
}
}
delete inputBlock;
return outputBlock;
}
QgsRasterBlock * QgsRasterProjector::block( int bandNo, QgsRectangle const & extent, int width, int height )
{
QgsDebugMsg( QString( "extent:\n%1" ).arg( extent.toString() ) );
QgsDebugMsg( QString( "width = %1 height = %2" ).arg( width ).arg( height ) );
if ( !mInput )
{
QgsDebugMsg( "Input not set" );
return new QgsRasterBlock();
}
if ( ! mSrcCRS.isValid() || ! mDestCRS.isValid() || mSrcCRS == mDestCRS )
{
QgsDebugMsg( "No projection necessary" );
return mInput->block( bandNo, extent, width, height );
}
mDestExtent = extent;
mDestRows = height;
mDestCols = width;
calc();
QgsDebugMsg( QString( "srcExtent:\n%1" ).arg( srcExtent().toString() ) );
QgsDebugMsg( QString( "srcCols = %1 srcRows = %2" ).arg( srcCols() ).arg( srcRows() ) );
// If we zoom out too much, projector srcRows / srcCols maybe 0, which can cause problems in providers
if ( srcRows() <= 0 || srcCols() <= 0 )
{
QgsDebugMsg( "Zero srcRows or srcCols" );
return new QgsRasterBlock();
}
QgsRasterBlock *inputBlock = mInput->block( bandNo, srcExtent(), srcCols(), srcRows() );
if ( !inputBlock || inputBlock->isEmpty() )
{
QgsDebugMsg( "No raster data!" );
delete inputBlock;
return new QgsRasterBlock();
}
qgssize pixelSize = QgsRasterBlock::typeSize( mInput->dataType( bandNo ) );
QgsRasterBlock *outputBlock;
if ( inputBlock->hasNoDataValue() )
{
outputBlock = new QgsRasterBlock( inputBlock->dataType(), width, height, inputBlock->noDataValue() );
}
else
{
outputBlock = new QgsRasterBlock( inputBlock->dataType(), width, height );
}
if ( !outputBlock->isValid() )
{
QgsDebugMsg( "Cannot create block" );
delete inputBlock;
return outputBlock;
}
// set output to no data, it should be fast
outputBlock->setIsNoData();
// No data: because isNoData()/setIsNoData() is slow with respect to simple memcpy,
// we use if only if necessary:
// 1) no data value exists (numerical) -> memcpy, not necessary isNoData()/setIsNoData()
// 2) no data value does not exist but it may contain no data (numerical no data bitmap)
// -> must use isNoData()/setIsNoData()
// 3) no data are not used (no no data value, no no data bitmap) -> simple memcpy
// 4) image - simple memcpy
// To copy no data values stored in bitmaps we have to use isNoData()/setIsNoData(),
// we cannot fill output block with no data because we use memcpy for data, not setValue().
bool doNoData = !QgsRasterBlock::typeIsNumeric( inputBlock->dataType() ) && inputBlock->hasNoData() && !inputBlock->hasNoDataValue();
const QgsCoordinateTransform* inverseCt = nullptr;
if ( !mApproximate )
{
inverseCt = QgsCoordinateTransformCache::instance()->transform( mDestCRS.authid(), mSrcCRS.authid(), mDestDatumTransform, mSrcDatumTransform );
}
outputBlock->setIsNoData();
int srcRow, srcCol;
for ( int i = 0; i < height; ++i )
{
for ( int j = 0; j < width; ++j )
{
bool inside = srcRowCol( i, j, &srcRow, &srcCol, inverseCt );
if ( !inside ) continue; // we have everything set to no data
qgssize srcIndex = ( qgssize )srcRow * mSrcCols + srcCol;
QgsDebugMsgLevel( QString( "row = %1 col = %2 srcRow = %3 srcCol = %4" ).arg( i ).arg( j ).arg( srcRow ).arg( srcCol ), 5 );
// isNoData() may be slow so we check doNoData first
if ( doNoData && inputBlock->isNoData( srcRow, srcCol ) )
{
outputBlock->setIsNoData( i, j );
continue;
}
qgssize destIndex = ( qgssize )i * width + j;
char *srcBits = inputBlock->bits( srcIndex );
char *destBits = outputBlock->bits( destIndex );
if ( !srcBits )
{
QgsDebugMsg( QString( "Cannot get input block data: row = %1 col = %2" ).arg( i ).arg( j ) );
continue;
}
if ( !destBits )
{
QgsDebugMsg( QString( "Cannot set output block data: srcRow = %1 srcCol = %2" ).arg( srcRow ).arg( srcCol ) );
continue;
}
memcpy( destBits, srcBits, pixelSize );
outputBlock->setIsData( i, j );
}
}
delete inputBlock;
return outputBlock;
}
QgsRasterBlock * QgsRasterDataProvider::block( int theBandNo, QgsRectangle const & theExtent, int theWidth, int theHeight )
{
QgsDebugMsg( QString( "theBandNo = %1 theWidth = %2 theHeight = %3" ).arg( theBandNo ).arg( theWidth ).arg( theHeight ) );
QgsDebugMsg( QString( "theExtent = %1" ).arg( theExtent.toString() ) );
QgsRasterBlock *block = new QgsRasterBlock( dataType( theBandNo ), theWidth, theHeight, noDataValue( theBandNo ) );
if ( block->isEmpty() )
{
QgsDebugMsg( "Couldn't create raster block" );
return block;
}
// Read necessary extent only
QgsRectangle tmpExtent = extent().intersect( &theExtent );
if ( tmpExtent.isEmpty() )
{
QgsDebugMsg( "Extent outside provider extent" );
block->setIsNoData();
return block;
}
double xRes = theExtent.width() / theWidth;
double yRes = theExtent.height() / theHeight;
double tmpXRes, tmpYRes;
double providerXRes = 0;
double providerYRes = 0;
if ( capabilities() & ExactResolution )
{
providerXRes = extent().width() / xSize();
providerYRes = extent().height() / ySize();
tmpXRes = qMax( providerXRes, xRes );
tmpYRes = qMax( providerYRes, yRes );
if ( doubleNear( tmpXRes, xRes ) ) tmpXRes = xRes;
if ( doubleNear( tmpYRes, yRes ) ) tmpYRes = yRes;
}
else
{
tmpXRes = xRes;
tmpYRes = yRes;
}
if ( tmpExtent != theExtent ||
tmpXRes > xRes || tmpYRes > yRes )
{
// Read smaller extent or lower resolution
// Calculate row/col limits (before tmpExtent is aligned)
int fromRow = qRound(( theExtent.yMaximum() - tmpExtent.yMaximum() ) / yRes );
int toRow = qRound(( theExtent.yMaximum() - tmpExtent.yMinimum() ) / yRes ) - 1;
int fromCol = qRound(( tmpExtent.xMinimum() - theExtent.xMinimum() ) / xRes ) ;
int toCol = qRound(( tmpExtent.xMaximum() - theExtent.xMinimum() ) / xRes ) - 1;
QgsDebugMsg( QString( "fromRow = %1 toRow = %2 fromCol = %3 toCol = %4" ).arg( fromRow ).arg( toRow ).arg( fromCol ).arg( toCol ) );
if ( fromRow < 0 || fromRow >= theHeight || toRow < 0 || toRow >= theHeight ||
fromCol < 0 || fromCol >= theWidth || toCol < 0 || toCol >= theWidth )
{
// Should not happen
QgsDebugMsg( "Row or column limits out of range" );
return block;
}
// If lower source resolution is used, the extent must beS aligned to original
// resolution to avoid possible shift due to resampling
if ( tmpXRes > xRes )
{
int col = floor(( tmpExtent.xMinimum() - extent().xMinimum() ) / providerXRes );
tmpExtent.setXMinimum( extent().xMinimum() + col * providerXRes );
col = ceil(( tmpExtent.xMaximum() - extent().xMinimum() ) / providerXRes );
tmpExtent.setXMaximum( extent().xMinimum() + col * providerXRes );
}
if ( tmpYRes > yRes )
{
int row = floor(( extent().yMaximum() - tmpExtent.yMaximum() ) / providerYRes );
tmpExtent.setYMaximum( extent().yMaximum() - row * providerYRes );
row = ceil(( extent().yMaximum() - tmpExtent.yMinimum() ) / providerYRes );
tmpExtent.setYMinimum( extent().yMaximum() - row * providerYRes );
}
int tmpWidth = qRound( tmpExtent.width() / tmpXRes );
int tmpHeight = qRound( tmpExtent.height() / tmpYRes );
tmpXRes = tmpExtent.width() / tmpWidth;
tmpYRes = tmpExtent.height() / tmpHeight;
QgsDebugMsg( QString( "Reading smaller block tmpWidth = %1 theHeight = %2" ).arg( tmpWidth ).arg( tmpHeight ) );
QgsDebugMsg( QString( "tmpExtent = %1" ).arg( tmpExtent.toString() ) );
block->setIsNoData();
QgsRasterBlock *tmpBlock = new QgsRasterBlock( dataType( theBandNo ), tmpWidth, tmpHeight, noDataValue( theBandNo ) );
readBlock( theBandNo, tmpExtent, tmpWidth, tmpHeight, tmpBlock->data() );
int pixelSize = dataTypeSize( theBandNo );
double xMin = theExtent.xMinimum();
double yMax = theExtent.yMaximum();
double tmpXMin = tmpExtent.xMinimum();
double tmpYMax = tmpExtent.yMaximum();
for ( int row = fromRow; row <= toRow; row++ )
{
double y = yMax - ( row + 0.5 ) * yRes;
int tmpRow = floor(( tmpYMax - y ) / tmpYRes );
for ( int col = fromCol; col <= toCol; col++ )
{
double x = xMin + ( col + 0.5 ) * xRes;
int tmpCol = floor(( x - tmpXMin ) / tmpXRes );
if ( tmpRow < 0 || tmpRow >= tmpHeight || tmpCol < 0 || tmpCol >= tmpWidth )
{
QgsDebugMsg( "Source row or column limits out of range" );
block->setIsNoData(); // so that the problem becomes obvious and fixed
delete tmpBlock;
return block;
}
size_t tmpIndex = tmpRow * tmpWidth + tmpCol;
size_t index = row * theWidth + col;
char *tmpBits = tmpBlock->bits( tmpIndex );
char *bits = block->bits( index );
if ( !tmpBits )
{
QgsDebugMsg( QString( "Cannot get input block data tmpRow = %1 tmpCol = %2 tmpIndex = %3." ).arg( tmpRow ).arg( tmpCol ).arg( tmpIndex ) );
continue;
}
if ( !bits )
{
QgsDebugMsg( "Cannot set output block data." );
continue;
}
memcpy( bits, tmpBits, pixelSize );
}
}
delete tmpBlock;
}
else
{
readBlock( theBandNo, theExtent, theWidth, theHeight, block->data() );
}
// apply user no data values
// TODO: there are other readBlock methods where no data are not applied
block->applyNodataValues( userNoDataValue( theBandNo ) );
return block;
}
