// Clips a face to the back of a plane
void btPolyhedralContactClipping::clipFace(const btVertexArray& pVtxIn, btVertexArray& ppVtxOut, const btVector3& planeNormalWS,btScalar planeEqWS)
{
	
	int ve;
	btScalar ds, de;
	int numVerts = pVtxIn.size();
	if (numVerts < 2)
		return;

	btVector3 firstVertex=pVtxIn[pVtxIn.size()-1];
	btVector3 endVertex = pVtxIn[0];
	
	ds = planeNormalWS.dot(firstVertex)+planeEqWS;

	for (ve = 0; ve < numVerts; ve++)
	{
		endVertex=pVtxIn[ve];

		de = planeNormalWS.dot(endVertex)+planeEqWS;

		if (ds<0)
		{
			if (de<0)
			{
				// Start < 0, end < 0, so output endVertex
				ppVtxOut.push_back(endVertex);
			}
			else
			{
				// Start < 0, end >= 0, so output intersection
				ppVtxOut.push_back( 	firstVertex.lerp(endVertex,btScalar(ds * 1.f/(ds - de))));
			}
		}
		else
		{
			if (de<0)
			{
				// Start >= 0, end < 0 so output intersection and end
				ppVtxOut.push_back(firstVertex.lerp(endVertex,btScalar(ds * 1.f/(ds - de))));
				ppVtxOut.push_back(endVertex);
			}
		}
		firstVertex = endVertex;
		ds = de;
	}
}
示例#2
0
inline btVector3 findNearestPointToLine(const btVector3 &pt1, const btVector3 &pt2, const btVector3 &testPoint, float &uDistance)
{
    const btVector3 A = testPoint - pt1;
    const btVector3 u = (pt2-pt1).normalized();
	uDistance = A.dot(u);
	
    return pt1 + uDistance * u;
};
	void get_plane_equation_transformed(const btTransform& trans, btVector4& equation) const
	{
		const btVector3 normal = trans.getBasis() * m_planeNormal;
		equation[0] = normal[0];
		equation[1] = normal[1];
		equation[2] = normal[2];
		equation[3] = normal.dot(trans * (m_planeConstant * m_planeNormal));
	}
示例#4
0
btHingeConstraint::btHingeConstraint(btRigidBody& rbA,btRigidBody& rbB, const btVector3& pivotInA,const btVector3& pivotInB,
									 const btVector3& axisInA,const btVector3& axisInB, bool useReferenceFrameA)
									 :btTypedConstraint(HINGE_CONSTRAINT_TYPE, rbA,rbB),
#ifdef _BT_USE_CENTER_LIMIT_
									 m_limit(),
#endif
									 m_angularOnly(false),
									 m_enableAngularMotor(false),
									 m_useSolveConstraintObsolete(HINGE_USE_OBSOLETE_SOLVER),
									 m_useOffsetForConstraintFrame(HINGE_USE_FRAME_OFFSET),
									 m_useReferenceFrameA(useReferenceFrameA),
									 m_flags(0)
{
	m_rbAFrame.getOrigin() = pivotInA;
	
	// since no frame is given, assume this to be zero angle and just pick rb transform axis
	btVector3 rbAxisA1 = rbA.getCenterOfMassTransform().getBasis().getColumn(0);

	btVector3 rbAxisA2;
	btScalar projection = axisInA.dot(rbAxisA1);
	if (projection >= 1.0f - SIMD_EPSILON) {
		rbAxisA1 = -rbA.getCenterOfMassTransform().getBasis().getColumn(2);
		rbAxisA2 = rbA.getCenterOfMassTransform().getBasis().getColumn(1);
	} else if (projection <= -1.0f + SIMD_EPSILON) {
		rbAxisA1 = rbA.getCenterOfMassTransform().getBasis().getColumn(2);
		rbAxisA2 = rbA.getCenterOfMassTransform().getBasis().getColumn(1);      
	} else {
		rbAxisA2 = axisInA.cross(rbAxisA1);
		rbAxisA1 = rbAxisA2.cross(axisInA);
	}

	m_rbAFrame.getBasis().setValue( rbAxisA1.getX(),rbAxisA2.getX(),axisInA.getX(),
									rbAxisA1.getY(),rbAxisA2.getY(),axisInA.getY(),
									rbAxisA1.getZ(),rbAxisA2.getZ(),axisInA.getZ() );

	btQuaternion rotationArc = shortestArcQuat(axisInA,axisInB);
	btVector3 rbAxisB1 =  quatRotate(rotationArc,rbAxisA1);
	btVector3 rbAxisB2 =  axisInB.cross(rbAxisB1);	
	
	m_rbBFrame.getOrigin() = pivotInB;
	m_rbBFrame.getBasis().setValue( rbAxisB1.getX(),rbAxisB2.getX(),axisInB.getX(),
									rbAxisB1.getY(),rbAxisB2.getY(),axisInB.getY(),
									rbAxisB1.getZ(),rbAxisB2.getZ(),axisInB.getZ() );
	
#ifndef	_BT_USE_CENTER_LIMIT_
	//start with free
	m_lowerLimit = btScalar(1.0f);
	m_upperLimit = btScalar(-1.0f);
	m_biasFactor = 0.3f;
	m_relaxationFactor = 1.0f;
	m_limitSoftness = 0.9f;
	m_solveLimit = false;
#endif
	m_referenceSign = m_useReferenceFrameA ? btScalar(-1.f) : btScalar(1.f);
}
//bilateral constraint between two dynamic objects
void resolveSingleBilateral(btRigidBody& body1, const btVector3& pos1,
                      btRigidBody& body2, const btVector3& pos2,
                      btScalar distance, const btVector3& normal,btScalar& impulse ,btScalar timeStep)
{
	(void)timeStep;
	(void)distance;


	btScalar normalLenSqr = normal.length2();
	btAssert(btFabs(normalLenSqr) < btScalar(1.1));
	if (normalLenSqr > btScalar(1.1))
	{
		impulse = btScalar(0.);
		return;
	}
	btVector3 rel_pos1 = pos1 - body1.getCenterOfMassPosition(); 
	btVector3 rel_pos2 = pos2 - body2.getCenterOfMassPosition();
	//this jacobian entry could be re-used for all iterations
	
	btVector3 vel1 = body1.getVelocityInLocalPoint(rel_pos1);
	btVector3 vel2 = body2.getVelocityInLocalPoint(rel_pos2);
	btVector3 vel = vel1 - vel2;
	

	   btJacobianEntry jac(body1.getCenterOfMassTransform().getBasis().transpose(),
		body2.getCenterOfMassTransform().getBasis().transpose(),
		rel_pos1,rel_pos2,normal,body1.getInvInertiaDiagLocal(),body1.getInvMass(),
		body2.getInvInertiaDiagLocal(),body2.getInvMass());

	btScalar jacDiagAB = jac.getDiagonal();
	btScalar jacDiagABInv = btScalar(1.) / jacDiagAB;
	
	  btScalar rel_vel = jac.getRelativeVelocity(
		body1.getLinearVelocity(),
		body1.getCenterOfMassTransform().getBasis().transpose() * body1.getAngularVelocity(),
		body2.getLinearVelocity(),
		body2.getCenterOfMassTransform().getBasis().transpose() * body2.getAngularVelocity()); 
	btScalar a;
	a=jacDiagABInv;


	rel_vel = normal.dot(vel);
	
	//todo: move this into proper structure
	btScalar contactDamping = btScalar(0.2);

#ifdef ONLY_USE_LINEAR_MASS
	btScalar massTerm = btScalar(1.) / (body1.getInvMass() + body2.getInvMass());
	impulse = - contactDamping * rel_vel * massTerm;
#else	
	btScalar velocityImpulse = -contactDamping * rel_vel * jacDiagABInv;
	impulse = velocityImpulse;
#endif
}
void btConvexHullShape::project(const btTransform& trans, const btVector3& dir, btScalar& minProj, btScalar& maxProj, btVector3& witnesPtMin,btVector3& witnesPtMax) const
{
#if 1
	minProj = FLT_MAX;
	maxProj = -FLT_MAX;

	int numVerts = m_unscaledPoints.size();
	for(int i=0;i<numVerts;i++)
	{
		btVector3 vtx = m_unscaledPoints[i] * m_localScaling;
		btVector3 pt = trans * vtx;
		btScalar dp = pt.dot(dir);
		if(dp < minProj)	
		{
			minProj = dp;
			witnesPtMin = pt;
		}
		if(dp > maxProj)	
		{
			maxProj = dp;
			witnesPtMax=pt;
		}
	}
#else
	btVector3 localAxis = dir*trans.getBasis();
	witnesPtMin  = trans(localGetSupportingVertex(localAxis));
	witnesPtMax = trans(localGetSupportingVertex(-localAxis));

	minProj = witnesPtMin.dot(dir);
	maxProj = witnesPtMax.dot(dir);
#endif

	if(minProj>maxProj)
	{
		btSwap(minProj,maxProj);
		btSwap(witnesPtMin,witnesPtMax);
	}


}
示例#7
0
bool notExist(const btVector3& planeEquation,const btAlignedObjectArray<btVector3>& planeEquations)
{
	int numbrushes = planeEquations.size();
	for (int i=0;i<numbrushes;i++)
	{
		const btVector3& N1 = planeEquations[i];
		if (planeEquation.dot(N1) > btScalar(0.999))
		{
			return false;
		} 
	}
	return true;
}
示例#8
0
void btSliderConstraint::testAngLimits(void)
{
	m_angDepth = btScalar(0.);
	m_solveAngLim = false;
	if(m_lowerAngLimit <= m_upperAngLimit)
	{
		const btVector3 axisA0 = m_calculatedTransformA.getBasis().getColumn(1);
		const btVector3 axisA1 = m_calculatedTransformA.getBasis().getColumn(2);
		const btVector3 axisB0 = m_calculatedTransformB.getBasis().getColumn(1);
		btScalar rot = btAtan2Fast(axisB0.dot(axisA1), axisB0.dot(axisA0));  
		if(rot < m_lowerAngLimit)
		{
			m_angDepth = rot - m_lowerAngLimit;
			m_solveAngLim = true;
		} 
		else if(rot > m_upperAngLimit)
		{
			m_angDepth = rot - m_upperAngLimit;
			m_solveAngLim = true;
		}
	}
} // btSliderConstraint::testAngLimits()
示例#9
0
bool	btGeometryUtil::areVerticesBehindPlane(const btVector3& planeNormal, const btAlignedObjectArray<btVector3>& vertices, btScalar	margin)
{
	int numvertices = vertices.size();
	for (int i=0;i<numvertices;i++)
	{
		const btVector3& N1 = vertices[i];
		btScalar dist = btScalar(planeNormal.dot(N1))+btScalar(planeNormal[3])-margin;
		if (dist>btScalar(0.))
		{
			return false;
		}
	}
	return true;
}
	virtual void processTriangle( btVector3* triangle,int partId, int triangleIndex)
	{
		(void)partId;
		(void)triangleIndex;
		for (int i=0;i<3;i++)
		{
			btScalar dot = m_supportVecLocal.dot(triangle[i]);
			if (dot > m_maxDot)
			{
				m_maxDot = dot;
				m_supportVertexLocal = triangle[i];
			}
		}
	}
示例#11
0
bool EpaFace::Initialize()
{
	assert( m_pHalfEdge && "Must setup half-edge first!" );

	CollectVertices( m_pVertices );
	
	const btVector3 e0 = m_pVertices[ 1 ]->m_point - m_pVertices[ 0 ]->m_point;
	const btVector3 e1 = m_pVertices[ 2 ]->m_point - m_pVertices[ 0 ]->m_point;

	const btScalar e0Sqrd = e0.length2();
	const btScalar e1Sqrd = e1.length2();
	const btScalar e0e1   = e0.dot( e1 );

	m_determinant = e0Sqrd * e1Sqrd - e0e1 * e0e1;

	const btScalar e0v0 = e0.dot( m_pVertices[ 0 ]->m_point );
	const btScalar e1v0 = e1.dot( m_pVertices[ 0 ]->m_point );

	m_lambdas[ 0 ] = e0e1 * e1v0 - e1Sqrd * e0v0;
	m_lambdas[ 1 ] = e0e1 * e0v0 - e0Sqrd * e1v0;

	if ( IsAffinelyDependent() )
	{
		return false;
	}

	CalcClosestPoint();

#ifdef EPA_POLYHEDRON_USE_PLANES
	if ( !CalculatePlane() )
	{
		return false;
	}
#endif

	return true;
}
示例#12
0
文件: sph.cpp 项目: jiangong01/cs274c
void collisionWithBound(int i, btVector3& normal)
{
    static const float sElasticity        = 0.01f ;
    static const float sImpactCoefficient = 1.0f + sElasticity ;
    
    btFluidParticles& particles = fluid->internalGetParticles();
    btVector3 velFluid = fluid->getVelocity(i);
    
    const btVector3  velRelative      = velFluid;
    const btScalar speedNormal      = velRelative.dot(normal); // Contact normal depends on geometry.
    const btVector3  impulse          = - speedNormal * normal ; // Minus: speedNormal is negative.
    
    btVector3& vel = particles.m_vel[i];
    //Leapfrog integration
    btVector3 velNext = vel + impulse * sImpactCoefficient;
    vel = velNext;
}
示例#13
0
btHingeConstraint::btHingeConstraint(btRigidBody& rbA,btRigidBody& rbB, const btVector3& pivotInA,const btVector3& pivotInB,
									 btVector3& axisInA,btVector3& axisInB)
									 :btTypedConstraint(HINGE_CONSTRAINT_TYPE, rbA,rbB),
									 m_angularOnly(false),
									 m_enableAngularMotor(false)
{
	m_rbAFrame.getOrigin() = pivotInA;
	
	// since no frame is given, assume this to be zero angle and just pick rb transform axis
	btVector3 rbAxisA1 = rbA.getCenterOfMassTransform().getBasis().getColumn(0);

	btVector3 rbAxisA2;
	btScalar projection = axisInA.dot(rbAxisA1);
	if (projection >= 1.0f - SIMD_EPSILON) {
		rbAxisA1 = -rbA.getCenterOfMassTransform().getBasis().getColumn(2);
		rbAxisA2 = rbA.getCenterOfMassTransform().getBasis().getColumn(1);
	} else if (projection <= -1.0f + SIMD_EPSILON) {
		rbAxisA1 = rbA.getCenterOfMassTransform().getBasis().getColumn(2);
		rbAxisA2 = rbA.getCenterOfMassTransform().getBasis().getColumn(1);      
	} else {
		rbAxisA2 = axisInA.cross(rbAxisA1);
		rbAxisA1 = rbAxisA2.cross(axisInA);
	}

	m_rbAFrame.getBasis().setValue( rbAxisA1.getX(),rbAxisA2.getX(),axisInA.getX(),
									rbAxisA1.getY(),rbAxisA2.getY(),axisInA.getY(),
									rbAxisA1.getZ(),rbAxisA2.getZ(),axisInA.getZ() );

	btQuaternion rotationArc = shortestArcQuat(axisInA,axisInB);
	btVector3 rbAxisB1 =  quatRotate(rotationArc,rbAxisA1);
	btVector3 rbAxisB2 =  axisInB.cross(rbAxisB1);	
	
	m_rbBFrame.getOrigin() = pivotInB;
	m_rbBFrame.getBasis().setValue( rbAxisB1.getX(),rbAxisB2.getX(),-axisInB.getX(),
									rbAxisB1.getY(),rbAxisB2.getY(),-axisInB.getY(),
									rbAxisB1.getZ(),rbAxisB2.getZ(),-axisInB.getZ() );
	
	//start with free
	m_lowerLimit = btScalar(1e30);
	m_upperLimit = btScalar(-1e30);
	m_biasFactor = 0.3f;
	m_relaxationFactor = 1.0f;
	m_limitSoftness = 0.9f;
	m_solveLimit = false;

}
示例#14
0
btVector3	btConvexHullShape::localGetSupportingVertexWithoutMargin(const btVector3& vec)const
{
	btVector3 supVec(btScalar(0.),btScalar(0.),btScalar(0.));
	btScalar newDot,maxDot = btScalar(-BT_LARGE_FLOAT);

	for (int i=0;i<m_unscaledPoints.size();i++)
	{
		btVector3 vtx = m_unscaledPoints[i] * m_localScaling;

		newDot = vec.dot(vtx);
		if (newDot > maxDot)
		{
			maxDot = newDot;
			supVec = vtx;
		}
	}
	return supVec;
}
void	btPolyhedralContactClipping::clipHullAgainstHull(const btVector3& separatingNormal1, const btConvexPolyhedron& hullA, const btConvexPolyhedron& hullB, const btTransform& transA,const btTransform& transB, const btScalar minDist, btScalar maxDist,btDiscreteCollisionDetectorInterface::Result& resultOut)
{

	btVector3 separatingNormal = separatingNormal1.normalized();
	const btVector3 c0 = transA * hullA.m_localCenter;
	const btVector3 c1 = transB * hullB.m_localCenter;
	const btVector3 DeltaC2 = c0 - c1;


	btScalar curMaxDist=maxDist;
	int closestFaceB=-1;
	btScalar dmax = -FLT_MAX;
	{
		for(int face=0;face<hullB.m_faces.size();face++)
		{
			const btVector3 Normal(hullB.m_faces[face].m_plane[0], hullB.m_faces[face].m_plane[1], hullB.m_faces[face].m_plane[2]);
			const btVector3 WorldNormal = transB.getBasis() * Normal;
			btScalar d = WorldNormal.dot(separatingNormal);
			if (d > dmax)
			{
				dmax = d;
				closestFaceB = face;
			}
		}
	}
				btVertexArray worldVertsB1;
				{
					const btFace& polyB = hullB.m_faces[closestFaceB];
					const int numVertices = polyB.m_indices.size();
					for(int e0=0;e0<numVertices;e0++)
					{
						const btVector3& b = hullB.m_vertices[polyB.m_indices[e0]];
						worldVertsB1.push_back(transB*b);
					}
				}

	
	if (closestFaceB>=0)
		clipFaceAgainstHull(separatingNormal, hullA, transA,worldVertsB1, minDist, maxDist,resultOut);

}
void btHingeConstraint::getInfo2InternalUsingFrameOffset(btConstraintInfo2* info, const btTransform& transA,const btTransform& transB,const btVector3& angVelA,const btVector3& angVelB)
{
	btAssert(!m_useSolveConstraintObsolete);
	int i, s = info->rowskip;
	// transforms in world space
	btTransform trA = transA*m_rbAFrame;
	btTransform trB = transB*m_rbBFrame;
	// pivot point
	btVector3 pivotAInW = trA.getOrigin();
	btVector3 pivotBInW = trB.getOrigin();
#if 1
	// difference between frames in WCS
	btVector3 ofs = trB.getOrigin() - trA.getOrigin();
	// now get weight factors depending on masses
	btScalar miA = getRigidBodyA().getInvMass();
	btScalar miB = getRigidBodyB().getInvMass();
	bool hasStaticBody = (miA < SIMD_EPSILON) || (miB < SIMD_EPSILON);
	btScalar miS = miA + miB;
	btScalar factA, factB;
	if(miS > btScalar(0.f))
	{
		factA = miB / miS;
	}
	else 
	{
		factA = btScalar(0.5f);
	}
	factB = btScalar(1.0f) - factA;
	// get the desired direction of hinge axis
	// as weighted sum of Z-orthos of frameA and frameB in WCS
	btVector3 ax1A = trA.getBasis().getColumn(2);
	btVector3 ax1B = trB.getBasis().getColumn(2);
	btVector3 ax1 = ax1A * factA + ax1B * factB;
	ax1.normalize();
	// fill first 3 rows 
	// we want: velA + wA x relA == velB + wB x relB
	btTransform bodyA_trans = transA;
	btTransform bodyB_trans = transB;
	int s0 = 0;
	int s1 = s;
	int s2 = s * 2;
	int nrow = 2; // last filled row
	btVector3 tmpA, tmpB, relA, relB, p, q;
	// get vector from bodyB to frameB in WCS
	relB = trB.getOrigin() - bodyB_trans.getOrigin();
	// get its projection to hinge axis
	btVector3 projB = ax1 * relB.dot(ax1);
	// get vector directed from bodyB to hinge axis (and orthogonal to it)
	btVector3 orthoB = relB - projB;
	// same for bodyA
	relA = trA.getOrigin() - bodyA_trans.getOrigin();
	btVector3 projA = ax1 * relA.dot(ax1);
	btVector3 orthoA = relA - projA;
	btVector3 totalDist = projA - projB;
	// get offset vectors relA and relB
	relA = orthoA + totalDist * factA;
	relB = orthoB - totalDist * factB;
	// now choose average ortho to hinge axis
	p = orthoB * factA + orthoA * factB;
	btScalar len2 = p.length2();
	if(len2 > SIMD_EPSILON)
	{
		p /= btSqrt(len2);
	}
	else
	{
		p = trA.getBasis().getColumn(1);
	}
	// make one more ortho
	q = ax1.cross(p);
	// fill three rows
	tmpA = relA.cross(p);
	tmpB = relB.cross(p);
    for (i=0; i<3; i++) info->m_J1angularAxis[s0+i] = tmpA[i];
    for (i=0; i<3; i++) info->m_J2angularAxis[s0+i] = -tmpB[i];
	tmpA = relA.cross(q);
	tmpB = relB.cross(q);
	if(hasStaticBody && getSolveLimit())
	{ // to make constraint between static and dynamic objects more rigid
		// remove wA (or wB) from equation if angular limit is hit
		tmpB *= factB;
		tmpA *= factA;
	}
	for (i=0; i<3; i++) info->m_J1angularAxis[s1+i] = tmpA[i];
    for (i=0; i<3; i++) info->m_J2angularAxis[s1+i] = -tmpB[i];
	tmpA = relA.cross(ax1);
	tmpB = relB.cross(ax1);
	if(hasStaticBody)
	{ // to make constraint between static and dynamic objects more rigid
		// remove wA (or wB) from equation
		tmpB *= factB;
		tmpA *= factA;
	}
	for (i=0; i<3; i++) info->m_J1angularAxis[s2+i] = tmpA[i];
    for (i=0; i<3; i++) info->m_J2angularAxis[s2+i] = -tmpB[i];

	for (i=0; i<3; i++) info->m_J1linearAxis[s0+i] = p[i];
	for (i=0; i<3; i++) info->m_J1linearAxis[s1+i] = q[i];
	for (i=0; i<3; i++) info->m_J1linearAxis[s2+i] = ax1[i];
	// compute three elements of right hand side
	btScalar k = info->fps * info->erp;
	btScalar rhs = k * p.dot(ofs);
	info->m_constraintError[s0] = rhs;
	rhs = k * q.dot(ofs);
	info->m_constraintError[s1] = rhs;
	rhs = k * ax1.dot(ofs);
	info->m_constraintError[s2] = rhs;
	// the hinge axis should be the only unconstrained
	// rotational axis, the angular velocity of the two bodies perpendicular to
	// the hinge axis should be equal. thus the constraint equations are
	//    p*w1 - p*w2 = 0
	//    q*w1 - q*w2 = 0
	// where p and q are unit vectors normal to the hinge axis, and w1 and w2
	// are the angular velocity vectors of the two bodies.
	int s3 = 3 * s;
	int s4 = 4 * s;
	info->m_J1angularAxis[s3 + 0] = p[0];
	info->m_J1angularAxis[s3 + 1] = p[1];
	info->m_J1angularAxis[s3 + 2] = p[2];
	info->m_J1angularAxis[s4 + 0] = q[0];
	info->m_J1angularAxis[s4 + 1] = q[1];
	info->m_J1angularAxis[s4 + 2] = q[2];

	info->m_J2angularAxis[s3 + 0] = -p[0];
	info->m_J2angularAxis[s3 + 1] = -p[1];
	info->m_J2angularAxis[s3 + 2] = -p[2];
	info->m_J2angularAxis[s4 + 0] = -q[0];
	info->m_J2angularAxis[s4 + 1] = -q[1];
	info->m_J2angularAxis[s4 + 2] = -q[2];
	// compute the right hand side of the constraint equation. set relative
	// body velocities along p and q to bring the hinge back into alignment.
	// if ax1A,ax1B are the unit length hinge axes as computed from bodyA and
	// bodyB, we need to rotate both bodies along the axis u = (ax1 x ax2).
	// if "theta" is the angle between ax1 and ax2, we need an angular velocity
	// along u to cover angle erp*theta in one step :
	//   |angular_velocity| = angle/time = erp*theta / stepsize
	//                      = (erp*fps) * theta
	//    angular_velocity  = |angular_velocity| * (ax1 x ax2) / |ax1 x ax2|
	//                      = (erp*fps) * theta * (ax1 x ax2) / sin(theta)
	// ...as ax1 and ax2 are unit length. if theta is smallish,
	// theta ~= sin(theta), so
	//    angular_velocity  = (erp*fps) * (ax1 x ax2)
	// ax1 x ax2 is in the plane space of ax1, so we project the angular
	// velocity to p and q to find the right hand side.
	k = info->fps * info->erp;
	btVector3 u = ax1A.cross(ax1B);
	info->m_constraintError[s3] = k * u.dot(p);
	info->m_constraintError[s4] = k * u.dot(q);
#endif
	// check angular limits
	nrow = 4; // last filled row
	int srow;
	btScalar limit_err = btScalar(0.0);
	int limit = 0;
	if(getSolveLimit())
	{
		limit_err = m_correction * m_referenceSign;
		limit = (limit_err > btScalar(0.0)) ? 1 : 2;
	}
	// if the hinge has joint limits or motor, add in the extra row
	int powered = 0;
	if(getEnableAngularMotor())
	{
		powered = 1;
	}
	if(limit || powered) 
	{
		nrow++;
		srow = nrow * info->rowskip;
		info->m_J1angularAxis[srow+0] = ax1[0];
		info->m_J1angularAxis[srow+1] = ax1[1];
		info->m_J1angularAxis[srow+2] = ax1[2];

		info->m_J2angularAxis[srow+0] = -ax1[0];
		info->m_J2angularAxis[srow+1] = -ax1[1];
		info->m_J2angularAxis[srow+2] = -ax1[2];

		btScalar lostop = getLowerLimit();
		btScalar histop = getUpperLimit();
		if(limit && (lostop == histop))
		{  // the joint motor is ineffective
			powered = 0;
		}
		info->m_constraintError[srow] = btScalar(0.0f);
		btScalar currERP = (m_flags & BT_HINGE_FLAGS_ERP_STOP) ? m_stopERP : info->erp;
		if(powered)
		{
			if(m_flags & BT_HINGE_FLAGS_CFM_NORM)
			{
				info->cfm[srow] = m_normalCFM;
			}
			btScalar mot_fact = getMotorFactor(m_hingeAngle, lostop, histop, m_motorTargetVelocity, info->fps * currERP);
			info->m_constraintError[srow] += mot_fact * m_motorTargetVelocity * m_referenceSign;
			info->m_lowerLimit[srow] = - m_maxMotorImpulse;
			info->m_upperLimit[srow] =   m_maxMotorImpulse;
		}
		if(limit)
		{
			k = info->fps * currERP;
			info->m_constraintError[srow] += k * limit_err;
			if(m_flags & BT_HINGE_FLAGS_CFM_STOP)
			{
				info->cfm[srow] = m_stopCFM;
			}
			if(lostop == histop) 
			{
				// limited low and high simultaneously
				info->m_lowerLimit[srow] = -SIMD_INFINITY;
				info->m_upperLimit[srow] = SIMD_INFINITY;
			}
			else if(limit == 1) 
			{ // low limit
				info->m_lowerLimit[srow] = 0;
				info->m_upperLimit[srow] = SIMD_INFINITY;
			}
			else 
			{ // high limit
				info->m_lowerLimit[srow] = -SIMD_INFINITY;
				info->m_upperLimit[srow] = 0;
			}
			// bounce (we'll use slider parameter abs(1.0 - m_dampingLimAng) for that)
			btScalar bounce = m_relaxationFactor;
			if(bounce > btScalar(0.0))
			{
				btScalar vel = angVelA.dot(ax1);
				vel -= angVelB.dot(ax1);
				// only apply bounce if the velocity is incoming, and if the
				// resulting c[] exceeds what we already have.
				if(limit == 1)
				{	// low limit
					if(vel < 0)
					{
						btScalar newc = -bounce * vel;
						if(newc > info->m_constraintError[srow])
						{
							info->m_constraintError[srow] = newc;
						}
					}
				}
				else
				{	// high limit - all those computations are reversed
					if(vel > 0)
					{
						btScalar newc = -bounce * vel;
						if(newc < info->m_constraintError[srow])
						{
							info->m_constraintError[srow] = newc;
						}
					}
				}
			}
			info->m_constraintError[srow] *= m_biasFactor;
		} // if(limit)
	} // if angular limit or powered
}
void btHingeConstraint::getInfo2Internal(btConstraintInfo2* info, const btTransform& transA,const btTransform& transB,const btVector3& angVelA,const btVector3& angVelB)
{

	btAssert(!m_useSolveConstraintObsolete);
	int i, skip = info->rowskip;
	// transforms in world space
	btTransform trA = transA*m_rbAFrame;
	btTransform trB = transB*m_rbBFrame;
	// pivot point
	btVector3 pivotAInW = trA.getOrigin();
	btVector3 pivotBInW = trB.getOrigin();
#if 0
	if (0)
	{
		for (i=0;i<6;i++)
		{
			info->m_J1linearAxis[i*skip]=0;
			info->m_J1linearAxis[i*skip+1]=0;
			info->m_J1linearAxis[i*skip+2]=0;

			info->m_J1angularAxis[i*skip]=0;
			info->m_J1angularAxis[i*skip+1]=0;
			info->m_J1angularAxis[i*skip+2]=0;

			info->m_J2angularAxis[i*skip]=0;
			info->m_J2angularAxis[i*skip+1]=0;
			info->m_J2angularAxis[i*skip+2]=0;

			info->m_constraintError[i*skip]=0.f;
		}
	}
#endif //#if 0
	// linear (all fixed)
    info->m_J1linearAxis[0] = 1;
    info->m_J1linearAxis[skip + 1] = 1;
    info->m_J1linearAxis[2 * skip + 2] = 1;
	




	btVector3 a1 = pivotAInW - transA.getOrigin();
	{
		btVector3* angular0 = (btVector3*)(info->m_J1angularAxis);
		btVector3* angular1 = (btVector3*)(info->m_J1angularAxis + skip);
		btVector3* angular2 = (btVector3*)(info->m_J1angularAxis + 2 * skip);
		btVector3 a1neg = -a1;
		a1neg.getSkewSymmetricMatrix(angular0,angular1,angular2);
	}
	btVector3 a2 = pivotBInW - transB.getOrigin();
	{
		btVector3* angular0 = (btVector3*)(info->m_J2angularAxis);
		btVector3* angular1 = (btVector3*)(info->m_J2angularAxis + skip);
		btVector3* angular2 = (btVector3*)(info->m_J2angularAxis + 2 * skip);
		a2.getSkewSymmetricMatrix(angular0,angular1,angular2);
	}
	// linear RHS
    btScalar k = info->fps * info->erp;
	for(i = 0; i < 3; i++)
    {
        info->m_constraintError[i * skip] = k * (pivotBInW[i] - pivotAInW[i]);
    }
	// make rotations around X and Y equal
	// the hinge axis should be the only unconstrained
	// rotational axis, the angular velocity of the two bodies perpendicular to
	// the hinge axis should be equal. thus the constraint equations are
	//    p*w1 - p*w2 = 0
	//    q*w1 - q*w2 = 0
	// where p and q are unit vectors normal to the hinge axis, and w1 and w2
	// are the angular velocity vectors of the two bodies.
	// get hinge axis (Z)
	btVector3 ax1 = trA.getBasis().getColumn(2);
	// get 2 orthos to hinge axis (X, Y)
	btVector3 p = trA.getBasis().getColumn(0);
	btVector3 q = trA.getBasis().getColumn(1);
	// set the two hinge angular rows 
    int s3 = 3 * info->rowskip;
    int s4 = 4 * info->rowskip;

	info->m_J1angularAxis[s3 + 0] = p[0];
	info->m_J1angularAxis[s3 + 1] = p[1];
	info->m_J1angularAxis[s3 + 2] = p[2];
	info->m_J1angularAxis[s4 + 0] = q[0];
	info->m_J1angularAxis[s4 + 1] = q[1];
	info->m_J1angularAxis[s4 + 2] = q[2];

	info->m_J2angularAxis[s3 + 0] = -p[0];
	info->m_J2angularAxis[s3 + 1] = -p[1];
	info->m_J2angularAxis[s3 + 2] = -p[2];
	info->m_J2angularAxis[s4 + 0] = -q[0];
	info->m_J2angularAxis[s4 + 1] = -q[1];
	info->m_J2angularAxis[s4 + 2] = -q[2];
    // compute the right hand side of the constraint equation. set relative
    // body velocities along p and q to bring the hinge back into alignment.
    // if ax1,ax2 are the unit length hinge axes as computed from body1 and
    // body2, we need to rotate both bodies along the axis u = (ax1 x ax2).
    // if `theta' is the angle between ax1 and ax2, we need an angular velocity
    // along u to cover angle erp*theta in one step :
    //   |angular_velocity| = angle/time = erp*theta / stepsize
    //                      = (erp*fps) * theta
    //    angular_velocity  = |angular_velocity| * (ax1 x ax2) / |ax1 x ax2|
    //                      = (erp*fps) * theta * (ax1 x ax2) / sin(theta)
    // ...as ax1 and ax2 are unit length. if theta is smallish,
    // theta ~= sin(theta), so
    //    angular_velocity  = (erp*fps) * (ax1 x ax2)
    // ax1 x ax2 is in the plane space of ax1, so we project the angular
    // velocity to p and q to find the right hand side.
    btVector3 ax2 = trB.getBasis().getColumn(2);
	btVector3 u = ax1.cross(ax2);
	info->m_constraintError[s3] = k * u.dot(p);
	info->m_constraintError[s4] = k * u.dot(q);
	// check angular limits
	int nrow = 4; // last filled row
	int srow;
	btScalar limit_err = btScalar(0.0);
	int limit = 0;
	if(getSolveLimit())
	{
		limit_err = m_correction * m_referenceSign;
		limit = (limit_err > btScalar(0.0)) ? 1 : 2;
	}
	// if the hinge has joint limits or motor, add in the extra row
	int powered = 0;
	if(getEnableAngularMotor())
	{
		powered = 1;
	}
	if(limit || powered) 
	{
		nrow++;
		srow = nrow * info->rowskip;
		info->m_J1angularAxis[srow+0] = ax1[0];
		info->m_J1angularAxis[srow+1] = ax1[1];
		info->m_J1angularAxis[srow+2] = ax1[2];

		info->m_J2angularAxis[srow+0] = -ax1[0];
		info->m_J2angularAxis[srow+1] = -ax1[1];
		info->m_J2angularAxis[srow+2] = -ax1[2];

		btScalar lostop = getLowerLimit();
		btScalar histop = getUpperLimit();
		if(limit && (lostop == histop))
		{  // the joint motor is ineffective
			powered = 0;
		}
		info->m_constraintError[srow] = btScalar(0.0f);
		btScalar currERP = (m_flags & BT_HINGE_FLAGS_ERP_STOP) ? m_stopERP : info->erp;
		if(powered)
		{
			if(m_flags & BT_HINGE_FLAGS_CFM_NORM)
			{
				info->cfm[srow] = m_normalCFM;
			}
			btScalar mot_fact = getMotorFactor(m_hingeAngle, lostop, histop, m_motorTargetVelocity, info->fps * currERP);
			info->m_constraintError[srow] += mot_fact * m_motorTargetVelocity * m_referenceSign;
			info->m_lowerLimit[srow] = - m_maxMotorImpulse;
			info->m_upperLimit[srow] =   m_maxMotorImpulse;
		}
		if(limit)
		{
			k = info->fps * currERP;
			info->m_constraintError[srow] += k * limit_err;
			if(m_flags & BT_HINGE_FLAGS_CFM_STOP)
			{
				info->cfm[srow] = m_stopCFM;
			}
			if(lostop == histop) 
			{
				// limited low and high simultaneously
				info->m_lowerLimit[srow] = -SIMD_INFINITY;
				info->m_upperLimit[srow] = SIMD_INFINITY;
			}
			else if(limit == 1) 
			{ // low limit
				info->m_lowerLimit[srow] = 0;
				info->m_upperLimit[srow] = SIMD_INFINITY;
			}
			else 
			{ // high limit
				info->m_lowerLimit[srow] = -SIMD_INFINITY;
				info->m_upperLimit[srow] = 0;
			}
			// bounce (we'll use slider parameter abs(1.0 - m_dampingLimAng) for that)
			btScalar bounce = m_relaxationFactor;
			if(bounce > btScalar(0.0))
			{
				btScalar vel = angVelA.dot(ax1);
				vel -= angVelB.dot(ax1);
				// only apply bounce if the velocity is incoming, and if the
				// resulting c[] exceeds what we already have.
				if(limit == 1)
				{	// low limit
					if(vel < 0)
					{
						btScalar newc = -bounce * vel;
						if(newc > info->m_constraintError[srow])
						{
							info->m_constraintError[srow] = newc;
						}
					}
				}
				else
				{	// high limit - all those computations are reversed
					if(vel > 0)
					{
						btScalar newc = -bounce * vel;
						if(newc < info->m_constraintError[srow])
						{
							info->m_constraintError[srow] = newc;
						}
					}
				}
			}
			info->m_constraintError[srow] *= m_biasFactor;
		} // if(limit)
	} // if angular limit or powered
}
btScalar btTranslationalLimitMotor::solveLinearAxis(
	btScalar timeStep,
	btScalar jacDiagABInv,
	btRigidBody& body1,const btVector3 &pointInA,
	btRigidBody& body2,const btVector3 &pointInB,
	int limit_index,
	const btVector3 & axis_normal_on_a,
	const btVector3 & anchorPos)
{

	///find relative velocity
	//    btVector3 rel_pos1 = pointInA - body1.getCenterOfMassPosition();
	//    btVector3 rel_pos2 = pointInB - body2.getCenterOfMassPosition();
	btVector3 rel_pos1 = anchorPos - body1.getCenterOfMassPosition();
	btVector3 rel_pos2 = anchorPos - body2.getCenterOfMassPosition();

	btVector3 vel1;
	body1.internalGetVelocityInLocalPointObsolete(rel_pos1,vel1);
	btVector3 vel2;
	body2.internalGetVelocityInLocalPointObsolete(rel_pos2,vel2);
	btVector3 vel = vel1 - vel2;

	btScalar rel_vel = axis_normal_on_a.dot(vel);



	/// apply displacement correction

	//positional error (zeroth order error)
	btScalar depth = -(pointInA - pointInB).dot(axis_normal_on_a);
	btScalar	lo = btScalar(-BT_LARGE_FLOAT);
	btScalar	hi = btScalar(BT_LARGE_FLOAT);

	btScalar minLimit = m_lowerLimit[limit_index];
	btScalar maxLimit = m_upperLimit[limit_index];

	//handle the limits
	if (minLimit < maxLimit)
	{
		{
			if (depth > maxLimit)
			{
				depth -= maxLimit;
				lo = btScalar(0.);

			}
			else
			{
				if (depth < minLimit)
				{
					depth -= minLimit;
					hi = btScalar(0.);
				}
				else
				{
					return 0.0f;
				}
			}
		}
	}

	btScalar normalImpulse= m_limitSoftness*(m_restitution*depth/timeStep - m_damping*rel_vel) * jacDiagABInv;




	btScalar oldNormalImpulse = m_accumulatedImpulse[limit_index];
	btScalar sum = oldNormalImpulse + normalImpulse;
	m_accumulatedImpulse[limit_index] = sum > hi ? btScalar(0.) : sum < lo ? btScalar(0.) : sum;
	normalImpulse = m_accumulatedImpulse[limit_index] - oldNormalImpulse;

	btVector3 impulse_vector = axis_normal_on_a * normalImpulse;
	//body1.applyImpulse( impulse_vector, rel_pos1);
	//body2.applyImpulse(-impulse_vector, rel_pos2);

	btVector3 ftorqueAxis1 = rel_pos1.cross(axis_normal_on_a);
	btVector3 ftorqueAxis2 = rel_pos2.cross(axis_normal_on_a);
	body1.internalApplyImpulse(axis_normal_on_a*body1.getInvMass(), body1.getInvInertiaTensorWorld()*ftorqueAxis1,normalImpulse);
	body2.internalApplyImpulse(axis_normal_on_a*body2.getInvMass(), body2.getInvInertiaTensorWorld()*ftorqueAxis2,-normalImpulse);




	return normalImpulse;
}
btScalar btRotationalLimitMotor::solveAngularLimits(
	btScalar timeStep,btVector3& axis,btScalar jacDiagABInv,
	btRigidBody * body0, btRigidBody * body1 )
{
	if (needApplyTorques()==false) return 0.0f;

	btScalar target_velocity = m_targetVelocity;
	btScalar maxMotorForce = m_maxMotorForce;

	//current error correction
	if (m_currentLimit!=0)
	{
		target_velocity = -m_stopERP*m_currentLimitError/(timeStep);
		maxMotorForce = m_maxLimitForce;
	}

	maxMotorForce *= timeStep;

	// current velocity difference

	btVector3 angVelA;
	body0->internalGetAngularVelocity(angVelA);
	btVector3 angVelB;
	body1->internalGetAngularVelocity(angVelB);

	btVector3 vel_diff;
	vel_diff = angVelA-angVelB;



	btScalar rel_vel = axis.dot(vel_diff);

	// correction velocity
	btScalar motor_relvel = m_limitSoftness*(target_velocity  - m_damping*rel_vel);


	if ( motor_relvel < SIMD_EPSILON && motor_relvel > -SIMD_EPSILON  )
	{
		return 0.0f;//no need for applying force
	}


	// correction impulse
	btScalar unclippedMotorImpulse = (1+m_bounce)*motor_relvel*jacDiagABInv;

	// clip correction impulse
	btScalar clippedMotorImpulse;

	///@todo: should clip against accumulated impulse
	if (unclippedMotorImpulse>0.0f)
	{
		clippedMotorImpulse =  unclippedMotorImpulse > maxMotorForce? maxMotorForce: unclippedMotorImpulse;
	}
	else
	{
		clippedMotorImpulse =  unclippedMotorImpulse < -maxMotorForce ? -maxMotorForce: unclippedMotorImpulse;
	}


	// sort with accumulated impulses
	btScalar	lo = btScalar(-BT_LARGE_FLOAT);
	btScalar	hi = btScalar(BT_LARGE_FLOAT);

	btScalar oldaccumImpulse = m_accumulatedImpulse;
	btScalar sum = oldaccumImpulse + clippedMotorImpulse;
	m_accumulatedImpulse = sum > hi ? btScalar(0.) : sum < lo ? btScalar(0.) : sum;

	clippedMotorImpulse = m_accumulatedImpulse - oldaccumImpulse;

	btVector3 motorImp = clippedMotorImpulse * axis;

	//body0->applyTorqueImpulse(motorImp);
	//body1->applyTorqueImpulse(-motorImp);

	body0->internalApplyImpulse(btVector3(0,0,0), body0->getInvInertiaTensorWorld()*axis,clippedMotorImpulse);
	body1->internalApplyImpulse(btVector3(0,0,0), body1->getInvInertiaTensorWorld()*axis,-clippedMotorImpulse);


	return clippedMotorImpulse;


}
示例#20
0
void btSliderConstraint::getInfo2NonVirtual(btConstraintInfo2* info, const btTransform& transA,const btTransform& transB, const btVector3& linVelA,const btVector3& linVelB, btScalar rbAinvMass,btScalar rbBinvMass  )
{
	const btTransform& trA = getCalculatedTransformA();
	const btTransform& trB = getCalculatedTransformB();
	
	btAssert(!m_useSolveConstraintObsolete);
	int i, s = info->rowskip;
	
	btScalar signFact = m_useLinearReferenceFrameA ? btScalar(1.0f) : btScalar(-1.0f);
	
	// difference between frames in WCS
	btVector3 ofs = trB.getOrigin() - trA.getOrigin();
	// now get weight factors depending on masses
	btScalar miA = rbAinvMass;
	btScalar miB = rbBinvMass;
	bool hasStaticBody = (miA < SIMD_EPSILON) || (miB < SIMD_EPSILON);
	btScalar miS = miA + miB;
	btScalar factA, factB;
	if(miS > btScalar(0.f))
	{
		factA = miB / miS;
	}
	else 
	{
		factA = btScalar(0.5f);
	}
	factB = btScalar(1.0f) - factA;
	btVector3 ax1, p, q;
	btVector3 ax1A = trA.getBasis().getColumn(0);
	btVector3 ax1B = trB.getBasis().getColumn(0);
	if(m_useOffsetForConstraintFrame)
	{
		// get the desired direction of slider axis
		// as weighted sum of X-orthos of frameA and frameB in WCS
		ax1 = ax1A * factA + ax1B * factB;
		ax1.normalize();
		// construct two orthos to slider axis
		btPlaneSpace1 (ax1, p, q);
	}
	else
	{ // old way - use frameA
		ax1 = trA.getBasis().getColumn(0);
		// get 2 orthos to slider axis (Y, Z)
		p = trA.getBasis().getColumn(1);
		q = trA.getBasis().getColumn(2);
	}
	// make rotations around these orthos equal
	// the slider axis should be the only unconstrained
	// rotational axis, the angular velocity of the two bodies perpendicular to
	// the slider axis should be equal. thus the constraint equations are
	//    p*w1 - p*w2 = 0
	//    q*w1 - q*w2 = 0
	// where p and q are unit vectors normal to the slider axis, and w1 and w2
	// are the angular velocity vectors of the two bodies.
	info->m_J1angularAxis[0] = p[0];
	info->m_J1angularAxis[1] = p[1];
	info->m_J1angularAxis[2] = p[2];
	info->m_J1angularAxis[s+0] = q[0];
	info->m_J1angularAxis[s+1] = q[1];
	info->m_J1angularAxis[s+2] = q[2];

	info->m_J2angularAxis[0] = -p[0];
	info->m_J2angularAxis[1] = -p[1];
	info->m_J2angularAxis[2] = -p[2];
	info->m_J2angularAxis[s+0] = -q[0];
	info->m_J2angularAxis[s+1] = -q[1];
	info->m_J2angularAxis[s+2] = -q[2];
	// compute the right hand side of the constraint equation. set relative
	// body velocities along p and q to bring the slider back into alignment.
	// if ax1A,ax1B are the unit length slider axes as computed from bodyA and
	// bodyB, we need to rotate both bodies along the axis u = (ax1 x ax2).
	// if "theta" is the angle between ax1 and ax2, we need an angular velocity
	// along u to cover angle erp*theta in one step :
	//   |angular_velocity| = angle/time = erp*theta / stepsize
	//                      = (erp*fps) * theta
	//    angular_velocity  = |angular_velocity| * (ax1 x ax2) / |ax1 x ax2|
	//                      = (erp*fps) * theta * (ax1 x ax2) / sin(theta)
	// ...as ax1 and ax2 are unit length. if theta is smallish,
	// theta ~= sin(theta), so
	//    angular_velocity  = (erp*fps) * (ax1 x ax2)
	// ax1 x ax2 is in the plane space of ax1, so we project the angular
	// velocity to p and q to find the right hand side.
//	btScalar k = info->fps * info->erp * getSoftnessOrthoAng();
	btScalar currERP = (m_flags & BT_SLIDER_FLAGS_ERP_ORTANG) ? m_softnessOrthoAng : m_softnessOrthoAng * info->erp;
	btScalar k = info->fps * currERP;

	btVector3 u = ax1A.cross(ax1B);
	info->m_constraintError[0] = k * u.dot(p);
	info->m_constraintError[s] = k * u.dot(q);
	if(m_flags & BT_SLIDER_FLAGS_CFM_ORTANG)
	{
		info->cfm[0] = m_cfmOrthoAng;
		info->cfm[s] = m_cfmOrthoAng;
	}

	int nrow = 1; // last filled row
	int srow;
	btScalar limit_err;
	int limit;
	int powered;

	// next two rows. 
	// we want: velA + wA x relA == velB + wB x relB ... but this would
	// result in three equations, so we project along two orthos to the slider axis

	btTransform bodyA_trans = transA;
	btTransform bodyB_trans = transB;
	nrow++;
	int s2 = nrow * s;
	nrow++;
	int s3 = nrow * s;
	btVector3 tmpA(0,0,0), tmpB(0,0,0), relA(0,0,0), relB(0,0,0), c(0,0,0);
	if(m_useOffsetForConstraintFrame)
	{
		// get vector from bodyB to frameB in WCS
		relB = trB.getOrigin() - bodyB_trans.getOrigin();
		// get its projection to slider axis
		btVector3 projB = ax1 * relB.dot(ax1);
		// get vector directed from bodyB to slider axis (and orthogonal to it)
		btVector3 orthoB = relB - projB;
		// same for bodyA
		relA = trA.getOrigin() - bodyA_trans.getOrigin();
		btVector3 projA = ax1 * relA.dot(ax1);
		btVector3 orthoA = relA - projA;
		// get desired offset between frames A and B along slider axis
		btScalar sliderOffs = m_linPos - m_depth[0];
		// desired vector from projection of center of bodyA to projection of center of bodyB to slider axis
		btVector3 totalDist = projA + ax1 * sliderOffs - projB;
		// get offset vectors relA and relB
		relA = orthoA + totalDist * factA;
		relB = orthoB - totalDist * factB;
		// now choose average ortho to slider axis
		p = orthoB * factA + orthoA * factB;
		btScalar len2 = p.length2();
		if(len2 > SIMD_EPSILON)
		{
			p /= btSqrt(len2);
		}
		else
		{
			p = trA.getBasis().getColumn(1);
		}
		// make one more ortho
		q = ax1.cross(p);
		// fill two rows
		tmpA = relA.cross(p);
		tmpB = relB.cross(p);
		for (i=0; i<3; i++) info->m_J1angularAxis[s2+i] = tmpA[i];
		for (i=0; i<3; i++) info->m_J2angularAxis[s2+i] = -tmpB[i];
		tmpA = relA.cross(q);
		tmpB = relB.cross(q);
		if(hasStaticBody && getSolveAngLimit())
		{ // to make constraint between static and dynamic objects more rigid
			// remove wA (or wB) from equation if angular limit is hit
			tmpB *= factB;
			tmpA *= factA;
		}
		for (i=0; i<3; i++) info->m_J1angularAxis[s3+i] = tmpA[i];
		for (i=0; i<3; i++) info->m_J2angularAxis[s3+i] = -tmpB[i];
		for (i=0; i<3; i++) info->m_J1linearAxis[s2+i] = p[i];
		for (i=0; i<3; i++) info->m_J1linearAxis[s3+i] = q[i];
		for (i=0; i<3; i++) info->m_J2linearAxis[s2+i] = -p[i];
		for (i=0; i<3; i++) info->m_J2linearAxis[s3+i] = -q[i];
	}
	else
	{	// old way - maybe incorrect if bodies are not on the slider axis
		// see discussion "Bug in slider constraint" http://bulletphysics.org/Bullet/phpBB3/viewtopic.php?f=9&t=4024&start=0
		c = bodyB_trans.getOrigin() - bodyA_trans.getOrigin();
		btVector3 tmp = c.cross(p);
		for (i=0; i<3; i++) info->m_J1angularAxis[s2+i] = factA*tmp[i];
		for (i=0; i<3; i++) info->m_J2angularAxis[s2+i] = factB*tmp[i];
		tmp = c.cross(q);
		for (i=0; i<3; i++) info->m_J1angularAxis[s3+i] = factA*tmp[i];
		for (i=0; i<3; i++) info->m_J2angularAxis[s3+i] = factB*tmp[i];

		for (i=0; i<3; i++) info->m_J1linearAxis[s2+i] = p[i];
		for (i=0; i<3; i++) info->m_J1linearAxis[s3+i] = q[i];
		for (i=0; i<3; i++) info->m_J2linearAxis[s2+i] = -p[i];
		for (i=0; i<3; i++) info->m_J2linearAxis[s3+i] = -q[i];
	}
	// compute two elements of right hand side

	//	k = info->fps * info->erp * getSoftnessOrthoLin();
	currERP = (m_flags & BT_SLIDER_FLAGS_ERP_ORTLIN) ? m_softnessOrthoLin : m_softnessOrthoLin * info->erp;
	k = info->fps * currERP;

	btScalar rhs = k * p.dot(ofs);
	info->m_constraintError[s2] = rhs;
	rhs = k * q.dot(ofs);
	info->m_constraintError[s3] = rhs;
	if(m_flags & BT_SLIDER_FLAGS_CFM_ORTLIN)
	{
		info->cfm[s2] = m_cfmOrthoLin;
		info->cfm[s3] = m_cfmOrthoLin;
	}


	// check linear limits
	limit_err = btScalar(0.0);
	limit = 0;
	if(getSolveLinLimit())
	{
		limit_err = getLinDepth() *  signFact;
		limit = (limit_err > btScalar(0.0)) ? 2 : 1;
	}
	powered = 0;
	if(getPoweredLinMotor())
	{
		powered = 1;
	}
	// if the slider has joint limits or motor, add in the extra row
	if (limit || powered) 
	{
		nrow++;
		srow = nrow * info->rowskip;
		info->m_J1linearAxis[srow+0] = ax1[0];
		info->m_J1linearAxis[srow+1] = ax1[1];
		info->m_J1linearAxis[srow+2] = ax1[2];
		info->m_J2linearAxis[srow+0] = -ax1[0];
		info->m_J2linearAxis[srow+1] = -ax1[1];
		info->m_J2linearAxis[srow+2] = -ax1[2];
		// linear torque decoupling step:
		//
		// we have to be careful that the linear constraint forces (+/- ax1) applied to the two bodies
		// do not create a torque couple. in other words, the points that the
		// constraint force is applied at must lie along the same ax1 axis.
		// a torque couple will result in limited slider-jointed free
		// bodies from gaining angular momentum.
		if(m_useOffsetForConstraintFrame)
		{
			// this is needed only when bodyA and bodyB are both dynamic.
			if(!hasStaticBody)
			{
				tmpA = relA.cross(ax1);
				tmpB = relB.cross(ax1);
				info->m_J1angularAxis[srow+0] = tmpA[0];
				info->m_J1angularAxis[srow+1] = tmpA[1];
				info->m_J1angularAxis[srow+2] = tmpA[2];
				info->m_J2angularAxis[srow+0] = -tmpB[0];
				info->m_J2angularAxis[srow+1] = -tmpB[1];
				info->m_J2angularAxis[srow+2] = -tmpB[2];
			}
		}
		else
		{ // The old way. May be incorrect if bodies are not on the slider axis
			btVector3 ltd;	// Linear Torque Decoupling vector (a torque)
			ltd = c.cross(ax1);
			info->m_J1angularAxis[srow+0] = factA*ltd[0];
			info->m_J1angularAxis[srow+1] = factA*ltd[1];
			info->m_J1angularAxis[srow+2] = factA*ltd[2];
			info->m_J2angularAxis[srow+0] = factB*ltd[0];
			info->m_J2angularAxis[srow+1] = factB*ltd[1];
			info->m_J2angularAxis[srow+2] = factB*ltd[2];
		}
		// right-hand part
		btScalar lostop = getLowerLinLimit();
		btScalar histop = getUpperLinLimit();
		if(limit && (lostop == histop))
		{  // the joint motor is ineffective
			powered = 0;
		}
		info->m_constraintError[srow] = 0.;
		info->m_lowerLimit[srow] = 0.;
		info->m_upperLimit[srow] = 0.;
		currERP = (m_flags & BT_SLIDER_FLAGS_ERP_LIMLIN) ? m_softnessLimLin : info->erp;
		if(powered)
		{
			if(m_flags & BT_SLIDER_FLAGS_CFM_DIRLIN)
			{
				info->cfm[srow] = m_cfmDirLin;
			}
			btScalar tag_vel = getTargetLinMotorVelocity();
			btScalar mot_fact = getMotorFactor(m_linPos, m_lowerLinLimit, m_upperLinLimit, tag_vel, info->fps * currERP);
			info->m_constraintError[srow] -= signFact * mot_fact * getTargetLinMotorVelocity();
			info->m_lowerLimit[srow] += -getMaxLinMotorForce() * info->fps;
			info->m_upperLimit[srow] += getMaxLinMotorForce() * info->fps;
		}
		if(limit)
		{
			k = info->fps * currERP;
			info->m_constraintError[srow] += k * limit_err;
			if(m_flags & BT_SLIDER_FLAGS_CFM_LIMLIN)
			{
				info->cfm[srow] = m_cfmLimLin;
			}
			if(lostop == histop) 
			{	// limited low and high simultaneously
				info->m_lowerLimit[srow] = -SIMD_INFINITY;
				info->m_upperLimit[srow] = SIMD_INFINITY;
			}
			else if(limit == 1) 
			{ // low limit
				info->m_lowerLimit[srow] = -SIMD_INFINITY;
				info->m_upperLimit[srow] = 0;
			}
			else 
			{ // high limit
				info->m_lowerLimit[srow] = 0;
				info->m_upperLimit[srow] = SIMD_INFINITY;
			}
			// bounce (we'll use slider parameter abs(1.0 - m_dampingLimLin) for that)
			btScalar bounce = btFabs(btScalar(1.0) - getDampingLimLin());
			if(bounce > btScalar(0.0))
			{
				btScalar vel = linVelA.dot(ax1);
				vel -= linVelB.dot(ax1);
				vel *= signFact;
				// only apply bounce if the velocity is incoming, and if the
				// resulting c[] exceeds what we already have.
				if(limit == 1)
				{	// low limit
					if(vel < 0)
					{
						btScalar newc = -bounce * vel;
						if (newc > info->m_constraintError[srow])
						{
							info->m_constraintError[srow] = newc;
						}
					}
				}
				else
				{ // high limit - all those computations are reversed
					if(vel > 0)
					{
						btScalar newc = -bounce * vel;
						if(newc < info->m_constraintError[srow]) 
						{
							info->m_constraintError[srow] = newc;
						}
					}
				}
			}
			info->m_constraintError[srow] *= getSoftnessLimLin();
		} // if(limit)
	} // if linear limit
	// check angular limits
	limit_err = btScalar(0.0);
	limit = 0;
	if(getSolveAngLimit())
	{
		limit_err = getAngDepth();
		limit = (limit_err > btScalar(0.0)) ? 1 : 2;
	}
	// if the slider has joint limits, add in the extra row
	powered = 0;
	if(getPoweredAngMotor())
	{
		powered = 1;
	}
	if(limit || powered) 
	{
		nrow++;
		srow = nrow * info->rowskip;
		info->m_J1angularAxis[srow+0] = ax1[0];
		info->m_J1angularAxis[srow+1] = ax1[1];
		info->m_J1angularAxis[srow+2] = ax1[2];

		info->m_J2angularAxis[srow+0] = -ax1[0];
		info->m_J2angularAxis[srow+1] = -ax1[1];
		info->m_J2angularAxis[srow+2] = -ax1[2];

		btScalar lostop = getLowerAngLimit();
		btScalar histop = getUpperAngLimit();
		if(limit && (lostop == histop))
		{  // the joint motor is ineffective
			powered = 0;
		}
		currERP = (m_flags & BT_SLIDER_FLAGS_ERP_LIMANG) ? m_softnessLimAng : info->erp;
		if(powered)
		{
			if(m_flags & BT_SLIDER_FLAGS_CFM_DIRANG)
			{
				info->cfm[srow] = m_cfmDirAng;
			}
			btScalar mot_fact = getMotorFactor(m_angPos, m_lowerAngLimit, m_upperAngLimit, getTargetAngMotorVelocity(), info->fps * currERP);
			info->m_constraintError[srow] = mot_fact * getTargetAngMotorVelocity();
			info->m_lowerLimit[srow] = -getMaxAngMotorForce() * info->fps;
			info->m_upperLimit[srow] = getMaxAngMotorForce() * info->fps;
		}
		if(limit)
		{
			k = info->fps * currERP;
			info->m_constraintError[srow] += k * limit_err;
			if(m_flags & BT_SLIDER_FLAGS_CFM_LIMANG)
			{
				info->cfm[srow] = m_cfmLimAng;
			}
			if(lostop == histop) 
			{
				// limited low and high simultaneously
				info->m_lowerLimit[srow] = -SIMD_INFINITY;
				info->m_upperLimit[srow] = SIMD_INFINITY;
			}
			else if(limit == 1) 
			{ // low limit
				info->m_lowerLimit[srow] = 0;
				info->m_upperLimit[srow] = SIMD_INFINITY;
			}
			else 
			{ // high limit
				info->m_lowerLimit[srow] = -SIMD_INFINITY;
				info->m_upperLimit[srow] = 0;
			}
			// bounce (we'll use slider parameter abs(1.0 - m_dampingLimAng) for that)
			btScalar bounce = btFabs(btScalar(1.0) - getDampingLimAng());
			if(bounce > btScalar(0.0))
			{
				btScalar vel = m_rbA.getAngularVelocity().dot(ax1);
				vel -= m_rbB.getAngularVelocity().dot(ax1);
				// only apply bounce if the velocity is incoming, and if the
				// resulting c[] exceeds what we already have.
				if(limit == 1)
				{	// low limit
					if(vel < 0)
					{
						btScalar newc = -bounce * vel;
						if(newc > info->m_constraintError[srow])
						{
							info->m_constraintError[srow] = newc;
						}
					}
				}
				else
				{	// high limit - all those computations are reversed
					if(vel > 0)
					{
						btScalar newc = -bounce * vel;
						if(newc < info->m_constraintError[srow])
						{
							info->m_constraintError[srow] = newc;
						}
					}
				}
			}
			info->m_constraintError[srow] *= getSoftnessLimAng();
		} // if(limit)
	} // if angular limit or powered
}
void CustomConvexConvexPairCollision::processCollision (btCollisionObject* body0,btCollisionObject* body1,const btDispatcherInfo& dispatchInfo,btManifoldResult* resultOut)
{
#if 0
    if (!m_manifoldPtr)
    {
        //swapped?
        m_manifoldPtr = m_dispatcher->getNewManifold(body0,body1);
        m_ownManifold = true;
    }
    resultOut->setPersistentManifold(m_manifoldPtr);


    CustomConvexShape* convex0 = (CustomConvexShape*)body0->getCollisionShape();
    CustomConvexShape* convex1 = (CustomConvexShape*)body1->getCollisionShape();


    float4 bodyApos;
    float4 bodyBpos;
    Quaternion bodyAquat;
    Quaternion bodyBquat;

    const btTransform& transA = body0->getWorldTransform();
    const btTransform& transB = body1->getWorldTransform();

    const btVector3& pA = body0->getWorldTransform().getOrigin();
    const btVector3& pB = body1->getWorldTransform().getOrigin();

    btQuaternion qA = body0->getWorldTransform().getRotation();
    btQuaternion qB = body1->getWorldTransform().getRotation();

    bodyApos.x = pA.getX();
    bodyApos.y = pA.getY();
    bodyApos.z = pA.getZ();
    bodyApos.w = 0.f;

    bodyBpos.x = pB.getX();
    bodyBpos.y = pB.getY();
    bodyBpos.z = pB.getZ();
    bodyBpos.w = 0.f;

    bodyAquat.x = qA.getX();
    bodyAquat.y = qA.getY();
    bodyAquat.z = qA.getZ();
    bodyAquat.w = qA.getW();

    bodyBquat.x = qB.getX();
    bodyBquat.y = qB.getY();
    bodyBquat.z = qB.getZ();
    bodyBquat.w = qB.getW();


#define CAPACITY_CONTACTS 4

    ContactPoint4 contactsOut[CAPACITY_CONTACTS];
    int freeContactIndex = 0;
    int contactCapacity = CAPACITY_CONTACTS;
    float collisionMargin = 0.001f;

    m_manifoldPtr->refreshContactPoints(body0->getWorldTransform(),body1->getWorldTransform());

    collideStraight(convex0->m_ConvexHeightField,convex1->m_ConvexHeightField,
                    bodyApos, bodyAquat,bodyBpos,bodyBquat,
                    contactsOut, freeContactIndex, contactCapacity,
                    collisionMargin );
    collideStraight(convex1->m_ConvexHeightField,convex0->m_ConvexHeightField,
                    bodyBpos, bodyBquat,bodyApos,bodyAquat,
                    contactsOut, freeContactIndex, contactCapacity,
                    collisionMargin );

    //copy points into manifold
    //refresh manifold

    btAssert(freeContactIndex<3);
    for (int j=0; j<freeContactIndex; j++)
    {
        int numPoints = contactsOut[j].getNPoints();
//		printf("numPoints = %d\n",numPoints);

        for (int i=0; i<numPoints; i++)
        {

            ContactPoint4& c = contactsOut[j];

            btVector3 normalOnBInWorld(
                c.m_worldNormal.x,
                c.m_worldNormal.y,
                c.m_worldNormal.z);
            btVector3 pointInWorldOnB(
                c.m_worldPos[i].x,
                c.m_worldPos[i].y,
                c.m_worldPos[i].z);
            btScalar depth = c.m_worldPos[i].w;
            if (depth<0)
            {

                const btVector3 deltaC = transB.getOrigin() - transA.getOrigin();
                if((deltaC.dot(normalOnBInWorld))>0.0f)
                {
                    normalOnBInWorld= -normalOnBInWorld;
                }
                normalOnBInWorld.normalize();
                if (j)
                {
                    resultOut->addContactPoint(normalOnBInWorld, pointInWorldOnB, depth);
                } else
                {
                    resultOut->addContactPoint(normalOnBInWorld, pointInWorldOnB-normalOnBInWorld*depth, depth);
                }
            }
        }
    }
#else
    btConvexConvexAlgorithm::processCollision(body0,body1,dispatchInfo,resultOut);
#endif
}
void	btPolyhedralContactClipping::clipFaceAgainstHull(const btVector3& separatingNormal, const btConvexPolyhedron& hullA,  const btTransform& transA, btVertexArray& worldVertsB1, const btScalar minDist, btScalar maxDist,btDiscreteCollisionDetectorInterface::Result& resultOut)
{
	btVertexArray worldVertsB2;
	btVertexArray* pVtxIn = &worldVertsB1;
	btVertexArray* pVtxOut = &worldVertsB2;
	pVtxOut->reserve(pVtxIn->size());

	int closestFaceA=-1;
	{
		btScalar dmin = FLT_MAX;
		for(int face=0;face<hullA.m_faces.size();face++)
		{
			const btVector3 Normal(hullA.m_faces[face].m_plane[0], hullA.m_faces[face].m_plane[1], hullA.m_faces[face].m_plane[2]);
			const btVector3 faceANormalWS = transA.getBasis() * Normal;
		
			btScalar d = faceANormalWS.dot(separatingNormal);
			if (d < dmin)
			{
				dmin = d;
				closestFaceA = face;
			}
		}
	}
	if (closestFaceA<0)
		return;

	const btFace& polyA = hullA.m_faces[closestFaceA];

		// clip polygon to back of planes of all faces of hull A that are adjacent to witness face
	int numContacts = pVtxIn->size();
	int numVerticesA = polyA.m_indices.size();
	for(int e0=0;e0<numVerticesA;e0++)
	{
		const btVector3& a = hullA.m_vertices[polyA.m_indices[e0]];
		const btVector3& b = hullA.m_vertices[polyA.m_indices[(e0+1)%numVerticesA]];
		const btVector3 edge0 = a - b;
		const btVector3 WorldEdge0 = transA.getBasis() * edge0;
		btVector3 worldPlaneAnormal1 = transA.getBasis()* btVector3(polyA.m_plane[0],polyA.m_plane[1],polyA.m_plane[2]);

		btVector3 planeNormalWS1 = -WorldEdge0.cross(worldPlaneAnormal1);//.cross(WorldEdge0);
		btVector3 worldA1 = transA*a;
		btScalar planeEqWS1 = -worldA1.dot(planeNormalWS1);
		
//int otherFace=0;
#ifdef BLA1
		int otherFace = polyA.m_connectedFaces[e0];
		btVector3 localPlaneNormal (hullA.m_faces[otherFace].m_plane[0],hullA.m_faces[otherFace].m_plane[1],hullA.m_faces[otherFace].m_plane[2]);
		btScalar localPlaneEq = hullA.m_faces[otherFace].m_plane[3];

		btVector3 planeNormalWS = transA.getBasis()*localPlaneNormal;
		btScalar planeEqWS=localPlaneEq-planeNormalWS.dot(transA.getOrigin());
#else 
		btVector3 planeNormalWS = planeNormalWS1;
		btScalar planeEqWS=planeEqWS1;
		
#endif
		//clip face

		clipFace(*pVtxIn, *pVtxOut,planeNormalWS,planeEqWS);
		btSwap(pVtxIn,pVtxOut);
		pVtxOut->resize(0);
	}



//#define ONLY_REPORT_DEEPEST_POINT

	btVector3 point;
	

	// only keep points that are behind the witness face
	{
		btVector3 localPlaneNormal (polyA.m_plane[0],polyA.m_plane[1],polyA.m_plane[2]);
		btScalar localPlaneEq = polyA.m_plane[3];
		btVector3 planeNormalWS = transA.getBasis()*localPlaneNormal;
		btScalar planeEqWS=localPlaneEq-planeNormalWS.dot(transA.getOrigin());
		for (int i=0;i<pVtxIn->size();i++)
		{
			
			btScalar depth = planeNormalWS.dot(pVtxIn->at(i))+planeEqWS;
			if (depth <=minDist)
			{
//				printf("clamped: depth=%f to minDist=%f\n",depth,minDist);
				depth = minDist;
			}

			if (depth <=maxDist)
			{
				btVector3 point = pVtxIn->at(i);
#ifdef ONLY_REPORT_DEEPEST_POINT
				curMaxDist = depth;
#else
#if 0
				if (depth<-3)
				{
					printf("error in btPolyhedralContactClipping depth = %f\n", depth);
					printf("likely wrong separatingNormal passed in\n");
				} 
#endif				
				resultOut.addContactPoint(separatingNormal,point,depth);
#endif
			}
		}
	}
#ifdef ONLY_REPORT_DEEPEST_POINT
	if (curMaxDist<maxDist)
	{
		resultOut.addContactPoint(separatingNormal,point,curMaxDist);
	}
#endif //ONLY_REPORT_DEEPEST_POINT

}
示例#23
0
// Returns the reflection direction of a ray going 'direction' hitting a surface with normal 'normal'
// from: http://www-cs-students.stanford.edu/~adityagp/final/node3.html
btVector3 CCharacterController::ComputeReflectionDirection(const btVector3& direction, const btVector3& normal)
{
	return direction - (btScalar(2.0) * direction.dot(normal)) * normal;
}
示例#24
0
文件: sph.cpp 项目: jiangong01/cs274c
void collisionWithBound(btVector3 &vel, btVector3 &pos, const btVector3 &normal, const btScalar &penetrationDist)
{
    if( penetrationDist < btScalar(0.0) )
	{
        
        pos = pos - normal * penetrationDist;
        
        vel = vel - (1 + Constant.m_boundaryRestitution * (-penetrationDist) / (Constant.m_timeStep * vel.length())) * vel.dot(normal) * normal;
	}
}
void btMultiBodyConstraint::fillMultiBodyConstraintMixed(btMultiBodySolverConstraint& solverConstraint, 
																	btMultiBodyJacobianData& data,
																 const btVector3& contactNormalOnB,
																 const btVector3& posAworld, const btVector3& posBworld, 
																 btScalar position,
																 const btContactSolverInfo& infoGlobal,
																 btScalar& relaxation,
																 bool isFriction, btScalar desiredVelocity, btScalar cfmSlip)
{
			
	
	btVector3 rel_pos1 = posAworld;
	btVector3 rel_pos2 = posBworld;

	solverConstraint.m_multiBodyA = m_bodyA;
	solverConstraint.m_multiBodyB = m_bodyB;
	solverConstraint.m_linkA = m_linkA;
	solverConstraint.m_linkB = m_linkB;
	

	btMultiBody* multiBodyA = solverConstraint.m_multiBodyA;
	btMultiBody* multiBodyB = solverConstraint.m_multiBodyB;

	const btVector3& pos1 = posAworld;
	const btVector3& pos2 = posBworld;

	btSolverBody* bodyA = multiBodyA ? 0 : &data.m_solverBodyPool->at(solverConstraint.m_solverBodyIdA);
	btSolverBody* bodyB = multiBodyB ? 0 : &data.m_solverBodyPool->at(solverConstraint.m_solverBodyIdB);

	btRigidBody* rb0 = multiBodyA ? 0 : bodyA->m_originalBody;
	btRigidBody* rb1 = multiBodyB ? 0 : bodyB->m_originalBody;

	if (bodyA)
		rel_pos1 = pos1 - bodyA->getWorldTransform().getOrigin(); 
	if (bodyB)
		rel_pos2 = pos2 - bodyB->getWorldTransform().getOrigin();

	relaxation = 1.f;

	if (multiBodyA)
	{
		const int ndofA  = multiBodyA->getNumLinks() + 6;

		solverConstraint.m_deltaVelAindex = multiBodyA->getCompanionId();

		if (solverConstraint.m_deltaVelAindex <0)
		{
			solverConstraint.m_deltaVelAindex = data.m_deltaVelocities.size();
			multiBodyA->setCompanionId(solverConstraint.m_deltaVelAindex);
			data.m_deltaVelocities.resize(data.m_deltaVelocities.size()+ndofA);
		} else
		{
			btAssert(data.m_deltaVelocities.size() >= solverConstraint.m_deltaVelAindex+ndofA);
		}

		solverConstraint.m_jacAindex = data.m_jacobians.size();
		data.m_jacobians.resize(data.m_jacobians.size()+ndofA);
		data.m_deltaVelocitiesUnitImpulse.resize(data.m_deltaVelocitiesUnitImpulse.size()+ndofA);
		btAssert(data.m_jacobians.size() == data.m_deltaVelocitiesUnitImpulse.size());

		btScalar* jac1=&data.m_jacobians[solverConstraint.m_jacAindex];
		multiBodyA->fillContactJacobian(solverConstraint.m_linkA, posAworld, contactNormalOnB, jac1, data.scratch_r, data.scratch_v, data.scratch_m);
		btScalar* delta = &data.m_deltaVelocitiesUnitImpulse[solverConstraint.m_jacAindex];
		multiBodyA->calcAccelerationDeltas(&data.m_jacobians[solverConstraint.m_jacAindex],delta,data.scratch_r, data.scratch_v);
	} else
	{
		btVector3 torqueAxis0 = rel_pos1.cross(contactNormalOnB);
		solverConstraint.m_angularComponentA = rb0 ? rb0->getInvInertiaTensorWorld()*torqueAxis0*rb0->getAngularFactor() : btVector3(0,0,0);
		solverConstraint.m_relpos1CrossNormal = torqueAxis0;
		solverConstraint.m_contactNormal1 = contactNormalOnB;
	}

	if (multiBodyB)
	{
		const int ndofB  = multiBodyB->getNumLinks() + 6;

		solverConstraint.m_deltaVelBindex = multiBodyB->getCompanionId();
		if (solverConstraint.m_deltaVelBindex <0)
		{
			solverConstraint.m_deltaVelBindex = data.m_deltaVelocities.size();
			multiBodyB->setCompanionId(solverConstraint.m_deltaVelBindex);
			data.m_deltaVelocities.resize(data.m_deltaVelocities.size()+ndofB);
		}

		solverConstraint.m_jacBindex = data.m_jacobians.size();

		data.m_jacobians.resize(data.m_jacobians.size()+ndofB);
		data.m_deltaVelocitiesUnitImpulse.resize(data.m_deltaVelocitiesUnitImpulse.size()+ndofB);
		btAssert(data.m_jacobians.size() == data.m_deltaVelocitiesUnitImpulse.size());

		multiBodyB->fillContactJacobian(solverConstraint.m_linkB, posBworld, -contactNormalOnB, &data.m_jacobians[solverConstraint.m_jacBindex], data.scratch_r, data.scratch_v, data.scratch_m);
		multiBodyB->calcAccelerationDeltas(&data.m_jacobians[solverConstraint.m_jacBindex],&data.m_deltaVelocitiesUnitImpulse[solverConstraint.m_jacBindex],data.scratch_r, data.scratch_v);
	} else
	{
		btVector3 torqueAxis1 = rel_pos2.cross(contactNormalOnB);		
		solverConstraint.m_angularComponentB = rb1 ? rb1->getInvInertiaTensorWorld()*-torqueAxis1*rb1->getAngularFactor() : btVector3(0,0,0);
		solverConstraint.m_relpos2CrossNormal = -torqueAxis1;
		solverConstraint.m_contactNormal2 = -contactNormalOnB;
	}

	{
						
		btVector3 vec;
		btScalar denom0 = 0.f;
		btScalar denom1 = 0.f;
		btScalar* jacB = 0;
		btScalar* jacA = 0;
		btScalar* lambdaA =0;
		btScalar* lambdaB =0;
		int ndofA  = 0;
		if (multiBodyA)
		{
			ndofA  = multiBodyA->getNumLinks() + 6;
			jacA = &data.m_jacobians[solverConstraint.m_jacAindex];
			lambdaA = &data.m_deltaVelocitiesUnitImpulse[solverConstraint.m_jacAindex];
			for (int i = 0; i < ndofA; ++i)
			{
				btScalar j = jacA[i] ;
				btScalar l =lambdaA[i];
				denom0 += j*l;
			}
		} else
		{
			if (rb0)
			{
				vec = ( solverConstraint.m_angularComponentA).cross(rel_pos1);
				denom0 = rb0->getInvMass() + contactNormalOnB.dot(vec);
			}
		}
		if (multiBodyB)
		{
			const int ndofB  = multiBodyB->getNumLinks() + 6;
			jacB = &data.m_jacobians[solverConstraint.m_jacBindex];
			lambdaB = &data.m_deltaVelocitiesUnitImpulse[solverConstraint.m_jacBindex];
			for (int i = 0; i < ndofB; ++i)
			{
				btScalar j = jacB[i] ;
				btScalar l =lambdaB[i];
				denom1 += j*l;
			}

		} else
		{
			if (rb1)
			{
				vec = ( -solverConstraint.m_angularComponentB).cross(rel_pos2);
				denom1 = rb1->getInvMass() + contactNormalOnB.dot(vec);
			}
		}

		 if (multiBodyA && (multiBodyA==multiBodyB))
		 {
            // ndof1 == ndof2 in this case
            for (int i = 0; i < ndofA; ++i) 
			{
                denom1 += jacB[i] * lambdaA[i];
                denom1 += jacA[i] * lambdaB[i];
            }
        }

		 btScalar d = denom0+denom1;
		 if (btFabs(d)>SIMD_EPSILON)
		 {
			 
			 solverConstraint.m_jacDiagABInv = relaxation/(d);
		 } else
		 {
			solverConstraint.m_jacDiagABInv  = 1.f;
		 }
		
	}

	
	//compute rhs and remaining solverConstraint fields

	

	btScalar restitution = 0.f;
	btScalar penetration = isFriction? 0 : position+infoGlobal.m_linearSlop;

	btScalar rel_vel = 0.f;
	int ndofA  = 0;
	int ndofB  = 0;
	{

		btVector3 vel1,vel2;
		if (multiBodyA)
		{
			ndofA  = multiBodyA->getNumLinks() + 6;
			btScalar* jacA = &data.m_jacobians[solverConstraint.m_jacAindex];
			for (int i = 0; i < ndofA ; ++i) 
				rel_vel += multiBodyA->getVelocityVector()[i] * jacA[i];
		} else
		{
			if (rb0)
			{
				rel_vel += rb0->getVelocityInLocalPoint(rel_pos1).dot(solverConstraint.m_contactNormal1);
			}
		}
		if (multiBodyB)
		{
			ndofB  = multiBodyB->getNumLinks() + 6;
			btScalar* jacB = &data.m_jacobians[solverConstraint.m_jacBindex];
			for (int i = 0; i < ndofB ; ++i) 
				rel_vel += multiBodyB->getVelocityVector()[i] * jacB[i];

		} else
		{
			if (rb1)
			{
				rel_vel += rb1->getVelocityInLocalPoint(rel_pos2).dot(solverConstraint.m_contactNormal2);
			}
		}

		solverConstraint.m_friction = 0.f;//cp.m_combinedFriction;

				
		restitution =  restitution * -rel_vel;//restitutionCurve(rel_vel, cp.m_combinedRestitution);
		if (restitution <= btScalar(0.))
		{
			restitution = 0.f;
		};
	}


	///warm starting (or zero if disabled)
	/*
	if (infoGlobal.m_solverMode & SOLVER_USE_WARMSTARTING)
	{
		solverConstraint.m_appliedImpulse = isFriction ? 0 : cp.m_appliedImpulse * infoGlobal.m_warmstartingFactor;

		if (solverConstraint.m_appliedImpulse)
		{
			if (multiBodyA)
			{
				btScalar impulse = solverConstraint.m_appliedImpulse;
				btScalar* deltaV = &data.m_deltaVelocitiesUnitImpulse[solverConstraint.m_jacAindex];
				multiBodyA->applyDeltaVee(deltaV,impulse);
				applyDeltaVee(data,deltaV,impulse,solverConstraint.m_deltaVelAindex,ndofA);
			} else
			{
				if (rb0)
					bodyA->internalApplyImpulse(solverConstraint.m_contactNormal1*bodyA->internalGetInvMass()*rb0->getLinearFactor(),solverConstraint.m_angularComponentA,solverConstraint.m_appliedImpulse);
			}
			if (multiBodyB)
			{
				btScalar impulse = solverConstraint.m_appliedImpulse;
				btScalar* deltaV = &data.m_deltaVelocitiesUnitImpulse[solverConstraint.m_jacBindex];
				multiBodyB->applyDeltaVee(deltaV,impulse);
				applyDeltaVee(data,deltaV,impulse,solverConstraint.m_deltaVelBindex,ndofB);
			} else
			{
				if (rb1)
					bodyB->internalApplyImpulse(-solverConstraint.m_contactNormal2*bodyB->internalGetInvMass()*rb1->getLinearFactor(),-solverConstraint.m_angularComponentB,-(btScalar)solverConstraint.m_appliedImpulse);
			}
		}
	} else
	*/
	{
		solverConstraint.m_appliedImpulse = 0.f;
	}

	solverConstraint.m_appliedPushImpulse = 0.f;

	{
		

		btScalar positionalError = 0.f;
		btScalar	velocityError = restitution - rel_vel;// * damping;
					

		btScalar erp = infoGlobal.m_erp2;
		if (!infoGlobal.m_splitImpulse || (penetration > infoGlobal.m_splitImpulsePenetrationThreshold))
		{
			erp = infoGlobal.m_erp;
		}

		if (penetration>0)
		{
			positionalError = 0;
			velocityError = -penetration / infoGlobal.m_timeStep;

		} else
		{
			positionalError = -penetration * erp/infoGlobal.m_timeStep;
		}

		btScalar  penetrationImpulse = positionalError*solverConstraint.m_jacDiagABInv;
		btScalar velocityImpulse = velocityError *solverConstraint.m_jacDiagABInv;

		if (!infoGlobal.m_splitImpulse || (penetration > infoGlobal.m_splitImpulsePenetrationThreshold))
		{
			//combine position and velocity into rhs
			solverConstraint.m_rhs = penetrationImpulse+velocityImpulse;
			solverConstraint.m_rhsPenetration = 0.f;

		} else
		{
			//split position and velocity into rhs and m_rhsPenetration
			solverConstraint.m_rhs = velocityImpulse;
			solverConstraint.m_rhsPenetration = penetrationImpulse;
		}

		solverConstraint.m_cfm = 0.f;
		solverConstraint.m_lowerLimit = -m_maxAppliedImpulse;
		solverConstraint.m_upperLimit = m_maxAppliedImpulse;
	}

}
SIMD_FORCE_INLINE btScalar computeAngularImpulseDenominator(const btVector3& axis, const btMatrix3x3& invInertiaWorld)
{
	btVector3 vec = axis * invInertiaWorld;
	return axis.dot(vec);
}
示例#27
0
void Raytracer::displayCallback() 
{

	updateCamera();

	for (int i=0;i<numObjects;i++)
	{
		transforms[i].setIdentity();
		btVector3	pos(0.f,0.f,-(2.5* numObjects * 0.5)+i*2.5f);
		transforms[i].setOrigin( pos );
		btQuaternion orn;
		if (i < 2)
		{
			orn.setEuler(yaw,pitch,roll);
			transforms[i].setRotation(orn);
		}
	}

	glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); 
	glDisable(GL_LIGHTING);
	if (!m_initialized)
	{
		m_initialized = true;
		glGenTextures(1, &glTextureId);
	}
	
	glBindTexture(GL_TEXTURE_2D,glTextureId );
	
	glPixelStorei(GL_UNPACK_ALIGNMENT, 1);
	glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_CLAMP);
	glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_CLAMP);
	glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR);
	glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR);
	
	glDisable(GL_TEXTURE_2D);
	glDisable(GL_BLEND);


	btVector4 rgba(1.f,0.f,0.f,0.5f);

	float top = 1.f;
	float bottom = -1.f;
	float nearPlane = 1.f;

	float tanFov = (top-bottom)*0.5f / nearPlane;

	float fov = 2.0 * atanf (tanFov);


	btVector3	rayFrom = getCameraPosition();
	btVector3 rayForward = getCameraTargetPosition()-getCameraPosition();
	rayForward.normalize();
	float farPlane = 600.f;
	rayForward*= farPlane;

	btVector3 rightOffset;
	btVector3 vertical(0.f,1.f,0.f);
	btVector3 hor;
	hor = rayForward.cross(vertical);
	hor.normalize();
	vertical = hor.cross(rayForward);
	vertical.normalize();

	float tanfov = tanf(0.5f*fov);

	hor *= 2.f * farPlane * tanfov;
	vertical *= 2.f * farPlane * tanfov;

	btVector3 rayToCenter = rayFrom + rayForward;

	btVector3 dHor = hor * 1.f/float(screenWidth);
	btVector3 dVert = vertical * 1.f/float(screenHeight);

	btTransform rayFromTrans;
	rayFromTrans.setIdentity();
	rayFromTrans.setOrigin(rayFrom);

	btTransform rayFromLocal;
	btTransform	rayToLocal;




	int x;

	///clear texture
	for (x=0;x<screenWidth;x++)
	{
		for (int y=0;y<screenHeight;y++)
		{
			btVector4 rgba(0.2f,0.2f,0.2f,1.f);
			raytracePicture->setPixel(x,y,rgba);
		}
	}

#if 1
	btVector3 rayTo;
	btTransform colObjWorldTransform;
	colObjWorldTransform.setIdentity();

	int	mode = 0;

	for (x=0;x<screenWidth;x++)
	{
		for (int y=0;y<screenHeight;y++)
		{

			rayTo = rayToCenter - 0.5f * hor + 0.5f * vertical;
			rayTo += x * dHor;
			rayTo -= y * dVert;
			btVector3	worldNormal(0,0,0);
			btVector3	worldPoint(0,0,0);



			bool hasHit = false;
			int mode = 0;
			switch (mode)
			{
			case 0:
				hasHit = lowlevelRaytest(rayFrom,rayTo,worldNormal,worldPoint);
				break;
			case 1:
				hasHit = singleObjectRaytest(rayFrom,rayTo,worldNormal,worldPoint);
				break;
			case 2:
				hasHit = worldRaytest(rayFrom,rayTo,worldNormal,worldPoint);
				break;
			default:
				{
				}
			}

			if (hasHit)
			{
				float lightVec0 = worldNormal.dot(btVector3(0,-1,-1));//0.4f,-1.f,-0.4f));
				float lightVec1= worldNormal.dot(btVector3(-1,0,-1));//-0.4f,-1.f,-0.4f));


				rgba = btVector4(lightVec0,lightVec1,0,1.f);
				rgba.setMin(btVector3(1,1,1));
				rgba.setMax(btVector3(0.2,0.2,0.2));
				rgba[3] = 1.f;
				raytracePicture->setPixel(x,y,rgba);
			} else
				btVector4 rgba = raytracePicture->getPixel(x,y);
			if (!rgba.length2())
			{
				raytracePicture->setPixel(x,y,btVector4(1,1,1,1));
			}
		}
	}
#endif

extern unsigned char sFontData[];
	if (0)
	{

		const char* text="ABC abc 123 !@#";
			int x=0;
		for (int cc = 0;cc<strlen(text);cc++)
		{
		
			char testChar = text[cc];//'b';
			char ch = testChar-32;
			int startx=ch%16;
			int starty=ch/16;


			//for (int i=0;i<256;i++)
			for (int i=startx*16;i<(startx*16+16);i++)
			{
				int y=0;
				//for (int j=0;j<256;j++)
				//for (int j=0;j<256;j++)
				for (int j=starty*16;j<(starty*16+16);j++)
				{
					
					btVector4 rgba(0,0,0,1);
					rgba[0] = (sFontData[i*3+255*256*3-(256*j)*3])/255.f;
					//rgba[0] += (sFontData[(i+1)*3+255*256*3-(256*j)*3])/255.*0.25f;
					//rgba[0] += (sFontData[(i)*3+255*256*3-(256*j+1)*3])/255.*0.25f;
					//rgba[0] += (sFontData[(i+1)*3+255*256*3-(256*j+1)*3])/255.*0.25;

					//if (rgba[0]!=0.f)
					{
						rgba[1]=rgba[0];
						rgba[2]=rgba[0];
						rgba[3]=1.f;

						//raytracePicture->setPixel(x,y,rgba);
						raytracePicture->addPixel(x,y,rgba);
					}
					y++;
				}
				x++;
			}
		}
	}


	//raytracePicture->grapicalPrintf("CCD RAYTRACER",sFontData);
	char buffer[256];
	sprintf(buffer,"%d rays",screenWidth*screenHeight*numObjects);
	//sprintf(buffer,"Toggle",screenWidth*screenHeight*numObjects);
	//sprintf(buffer,"TEST",screenWidth*screenHeight*numObjects);
	//raytracePicture->grapicalPrintf(buffer,sFontData,0,10);//&BMF_font_helv10,0,10);
	raytracePicture->grapicalPrintf(buffer,sFontData,0,0);//&BMF_font_helv10,0,10);


	glMatrixMode(GL_PROJECTION);
	glPushMatrix();
	glLoadIdentity();
	glFrustum(-1.0,1.0,-1.0,1.0,3,2020.0);

	glMatrixMode(GL_MODELVIEW);
	glPushMatrix();
	glLoadIdentity();									// reset The Modelview Matrix
	glTranslatef(0.0f,0.0f,-3.1f);						// Move Into The Screen 5 Units



	glEnable(GL_TEXTURE_2D);
	glBindTexture(GL_TEXTURE_2D,glTextureId );

	const unsigned char *ptr = raytracePicture->getBuffer();
	glTexImage2D(GL_TEXTURE_2D, 
		0, 
		GL_RGBA, 
		raytracePicture->getWidth(),raytracePicture->getHeight(), 
		0, 
		GL_RGBA, 
		GL_UNSIGNED_BYTE, 
		ptr);


	glEnable (GL_BLEND);
	glBlendFunc (GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA);
	glColor4f (1,1,1,1); // alpha=0.5=half visible

	glBegin(GL_QUADS);
	glTexCoord2f(0.0f, 0.0f);
	glVertex2f(-1,1);
	glTexCoord2f(1.0f, 0.0f);
	glVertex2f(1,1);
	glTexCoord2f(1.0f, 1.0f);
	glVertex2f(1,-1);
	glTexCoord2f(0.0f, 1.0f);
	glVertex2f(-1,-1);
	glEnd();



	glMatrixMode(GL_MODELVIEW);
	glPopMatrix();
	glMatrixMode(GL_PROJECTION);
	glPopMatrix();
	glMatrixMode(GL_MODELVIEW);


	glDisable(GL_TEXTURE_2D);
	glDisable(GL_DEPTH_TEST);

	GL_ShapeDrawer::drawCoordSystem();



	{
		for (int i=0;i<numObjects;i++)
		{
			btVector3 aabbMin,aabbMax;
			shapePtr[i]->getAabb(transforms[i],aabbMin,aabbMax);
		}
	}

	glPushMatrix();




	glPopMatrix();

	pitch += 0.005f;
	yaw += 0.01f;
	m_azi += 1.f;

	glFlush();
	glutSwapBuffers();
}
bool btPolyhedralContactClipping::findSeparatingAxis(	const btConvexPolyhedron& hullA, const btConvexPolyhedron& hullB, const btTransform& transA, const btTransform& transB, btVector3& sep, btDiscreteCollisionDetectorInterface::Result& resultOut)
{
	gActualSATPairTests++;

//#ifdef TEST_INTERNAL_OBJECTS
	const btVector3 c0 = transA * hullA.m_localCenter;
	const btVector3 c1 = transB * hullB.m_localCenter;
	const btVector3 DeltaC2 = c0 - c1;
//#endif

	btScalar dmin = FLT_MAX;
	int curPlaneTests=0;

	int numFacesA = hullA.m_faces.size();
	// Test normals from hullA
	for(int i=0;i<numFacesA;i++)
	{
		const btVector3 Normal(hullA.m_faces[i].m_plane[0], hullA.m_faces[i].m_plane[1], hullA.m_faces[i].m_plane[2]);
		btVector3 faceANormalWS = transA.getBasis() * Normal;
		if (DeltaC2.dot(faceANormalWS)<0)
			faceANormalWS*=-1.f;

		curPlaneTests++;
#ifdef TEST_INTERNAL_OBJECTS
		gExpectedNbTests++;
		if(gUseInternalObject && !TestInternalObjects(transA, transB, DeltaC2, faceANormalWS, hullA, hullB, dmin))
			continue;
		gActualNbTests++;
#endif

		btScalar d;
		btVector3 wA, wB;
		if(!TestSepAxis( hullA, hullB, transA, transB, faceANormalWS, d, wA, wB))
			return false;

		if(d<dmin)
		{
			dmin = d;
			sep = faceANormalWS;
		}
	}

	int numFacesB = hullB.m_faces.size();
	// Test normals from hullB
	for(int i=0;i<numFacesB;i++)
	{
		const btVector3 Normal(hullB.m_faces[i].m_plane[0], hullB.m_faces[i].m_plane[1], hullB.m_faces[i].m_plane[2]);
		btVector3 WorldNormal = transB.getBasis() * Normal;
		if (DeltaC2.dot(WorldNormal)<0)
			WorldNormal *=-1.f;

		curPlaneTests++;
#ifdef TEST_INTERNAL_OBJECTS
		gExpectedNbTests++;
		if(gUseInternalObject && !TestInternalObjects(transA, transB, DeltaC2, WorldNormal, hullA, hullB, dmin))
			continue;
		gActualNbTests++;
#endif

		btScalar d;
		btVector3 wA, wB;
		if(!TestSepAxis(hullA, hullB, transA, transB, WorldNormal, d,wA, wB))
			return false;

		if(d<dmin)
		{
			dmin = d;
			sep = WorldNormal;
		}
	}

	btVector3 edgeAstart, edgeAend, edgeBstart, edgeBend;
	int edgeA=-1;
	int edgeB=-1;
	btVector3 worldEdgeA;
	btVector3 worldEdgeB;
	btVector3 witnessPointA, witnessPointB;
	

	int curEdgeEdge = 0;
	// Test edges
	for(int e0=0;e0<hullA.m_uniqueEdges.size();e0++)
	{
		const btVector3 edge0 = hullA.m_uniqueEdges[e0];
		const btVector3 WorldEdge0 = transA.getBasis() * edge0;
		for(int e1=0;e1<hullB.m_uniqueEdges.size();e1++)
		{
			const btVector3 edge1 = hullB.m_uniqueEdges[e1];
			const btVector3 WorldEdge1 = transB.getBasis() * edge1;

			btVector3 Cross = WorldEdge0.cross(WorldEdge1);
			curEdgeEdge++;
			if(!IsAlmostZero(Cross))
			{
				Cross = Cross.normalize();
				if (DeltaC2.dot(Cross)<0)
					Cross *= -1.f;


#ifdef TEST_INTERNAL_OBJECTS
				gExpectedNbTests++;
				if(gUseInternalObject && !TestInternalObjects(transA, transB, DeltaC2, Cross, hullA, hullB, dmin))
					continue;
				gActualNbTests++;
#endif

				btScalar dist;
				btVector3 wA, wB;
				if(!TestSepAxis( hullA, hullB, transA, transB, Cross, dist, wA, wB))
					return false;

				if(dist<dmin)
				{
					dmin = dist;
					sep = Cross;
					edgeA=e0;
					edgeB=e1;
					worldEdgeA = WorldEdge0;
					worldEdgeB = WorldEdge1;
					witnessPointA=wA;
					witnessPointB=wB;
				}
			}
		}

	}

	if (edgeA>=0&&edgeB>=0)
	{
//		printf("edge-edge\n");
		//add an edge-edge contact

		btVector3 ptsVector;
		btVector3 offsetA;
		btVector3 offsetB;
		btScalar tA;
		btScalar tB;

		btVector3 translation = witnessPointB-witnessPointA;

		btVector3 dirA = worldEdgeA;
		btVector3 dirB = worldEdgeB;
		
		btScalar hlenB = 1e30f;
		btScalar hlenA = 1e30f;

		btSegmentsClosestPoints(ptsVector, offsetA, offsetB, tA, tB,
			translation,
			dirA, hlenA,
			dirB, hlenB);

		btScalar nlSqrt = ptsVector.length2();
		if (nlSqrt>SIMD_EPSILON)
		{
			btScalar nl = btSqrt(nlSqrt);
			ptsVector *= 1.f/nl;
			if (ptsVector.dot(DeltaC2)<0.f)
			{
				ptsVector*=-1.f;
			}
			btVector3 ptOnB = witnessPointB + offsetB;
			btScalar distance = nl;
			resultOut.addContactPoint(ptsVector, ptOnB,-distance);
		}

	}


	if((DeltaC2.dot(sep))<0.0f)
		sep = -sep;

	return true;
}
示例#29
0
// Returns the portion of 'direction' that is parallel to 'normal'
btVector3 CCharacterController::ParallelComponent(const btVector3& direction, const btVector3& normal)
{
	btScalar magnitude = direction.dot(normal);
	return normal * magnitude;
}
bool btPolyhedralContactClipping::findSeparatingAxis(	const btConvexPolyhedron& hullA, const btConvexPolyhedron& hullB, const btTransform& transA,const btTransform& transB, btVector3& sep)
{
	gActualSATPairTests++;

//#ifdef TEST_INTERNAL_OBJECTS
	const btVector3 c0 = transA * hullA.m_localCenter;
	const btVector3 c1 = transB * hullB.m_localCenter;
	const btVector3 DeltaC2 = c0 - c1;
//#endif

	btScalar dmin = FLT_MAX;
	int curPlaneTests=0;

	int numFacesA = hullA.m_faces.size();
	// Test normals from hullA
	for(int i=0;i<numFacesA;i++)
	{
		const btVector3 Normal(hullA.m_faces[i].m_plane[0], hullA.m_faces[i].m_plane[1], hullA.m_faces[i].m_plane[2]);
		const btVector3 faceANormalWS = transA.getBasis() * Normal;
		if (DeltaC2.dot(faceANormalWS)<0)
			continue;

		curPlaneTests++;
#ifdef TEST_INTERNAL_OBJECTS
		gExpectedNbTests++;
		if(gUseInternalObject && !TestInternalObjects(transA,transB, DeltaC2, faceANormalWS, hullA, hullB, dmin))
			continue;
		gActualNbTests++;
#endif

		btScalar d;
		if(!TestSepAxis( hullA, hullB, transA,transB, faceANormalWS, d))
			return false;

		if(d<dmin)
		{
			dmin = d;
			sep = faceANormalWS;
		}
	}

	int numFacesB = hullB.m_faces.size();
	// Test normals from hullB
	for(int i=0;i<numFacesB;i++)
	{
		const btVector3 Normal(hullB.m_faces[i].m_plane[0], hullB.m_faces[i].m_plane[1], hullB.m_faces[i].m_plane[2]);
		const btVector3 WorldNormal = transB.getBasis() * Normal;
		if (DeltaC2.dot(WorldNormal)<0)
			continue;

		curPlaneTests++;
#ifdef TEST_INTERNAL_OBJECTS
		gExpectedNbTests++;
		if(gUseInternalObject && !TestInternalObjects(transA,transB,DeltaC2, WorldNormal, hullA, hullB, dmin))
			continue;
		gActualNbTests++;
#endif

		btScalar d;
		if(!TestSepAxis(hullA, hullB,transA,transB, WorldNormal,d))
			return false;

		if(d<dmin)
		{
			dmin = d;
			sep = WorldNormal;
		}
	}

	btVector3 edgeAstart,edgeAend,edgeBstart,edgeBend;

	int curEdgeEdge = 0;
	// Test edges
	for(int e0=0;e0<hullA.m_uniqueEdges.size();e0++)
	{
		const btVector3 edge0 = hullA.m_uniqueEdges[e0];
		const btVector3 WorldEdge0 = transA.getBasis() * edge0;
		for(int e1=0;e1<hullB.m_uniqueEdges.size();e1++)
		{
			const btVector3 edge1 = hullB.m_uniqueEdges[e1];
			const btVector3 WorldEdge1 = transB.getBasis() * edge1;

			btVector3 Cross = WorldEdge0.cross(WorldEdge1);
			curEdgeEdge++;
			if(!IsAlmostZero(Cross))
			{
				Cross = Cross.normalize();
				if (DeltaC2.dot(Cross)<0)
					continue;


#ifdef TEST_INTERNAL_OBJECTS
				gExpectedNbTests++;
				if(gUseInternalObject && !TestInternalObjects(transA,transB,DeltaC2, Cross, hullA, hullB, dmin))
					continue;
				gActualNbTests++;
#endif

				btScalar dist;
				if(!TestSepAxis( hullA, hullB, transA,transB, Cross, dist))
					return false;

				if(dist<dmin)
				{
					dmin = dist;
					sep = Cross;
				}
			}
		}

	}

	const btVector3 deltaC = transB.getOrigin() - transA.getOrigin();
	if((deltaC.dot(sep))>0.0f)
		sep = -sep;

	return true;
}