void DIALOG_ERC::TestErc( wxArrayString* aMessagesList )
{
wxFileName fn;
m_writeErcFile = m_WriteResultOpt->GetValue();
m_TestSimilarLabels = m_cbTestSimilarLabels->GetValue();
m_tstUniqueGlobalLabels = m_cbTestUniqueGlbLabels->GetValue();
// Build the whole sheet list in hierarchy (sheet, not screen)
SCH_SHEET_LIST sheets;
sheets.AnnotatePowerSymbols( Prj().SchLibs() );
if( m_parent->CheckAnnotate( aMessagesList, false ) )
{
if( aMessagesList )
{
wxString msg = _( "Annotation required!" );
msg += wxT( "\n" );
aMessagesList->Add( msg );
}
return;
}
SCH_SCREENS screens;
// Erase all previous DRC markers.
screens.DeleteAllMarkers( MARKER_BASE::MARKER_ERC );
for( SCH_SCREEN* screen = screens.GetFirst(); screen != NULL; screen = screens.GetNext() )
{
/* Ff wire list has changed, delete Undo Redo list to avoid pointers on deleted
* data problems.
*/
if( screen->SchematicCleanUp( NULL ) )
screen->ClearUndoRedoList();
}
/* Test duplicate sheet names inside a given sheet, one cannot have sheets with
* duplicate names (file names can be duplicated).
*/
TestDuplicateSheetNames( true );
std::auto_ptr<NETLIST_OBJECT_LIST> objectsConnectedList( m_parent->BuildNetListBase() );
// Reset the connection type indicator
objectsConnectedList->ResetConnectionsType();
unsigned lastNet;
unsigned nextNet = lastNet = 0;
int MinConn = NOC;
for( unsigned net = 0; net < objectsConnectedList->size(); net++ )
{
if( objectsConnectedList->GetItemNet( lastNet ) !=
objectsConnectedList->GetItemNet( net ) )
{
// New net found:
MinConn = NOC;
nextNet = net;
}
switch( objectsConnectedList->GetItemType( net ) )
{
// These items do not create erc problems
case NET_ITEM_UNSPECIFIED:
case NET_SEGMENT:
case NET_BUS:
case NET_JUNCTION:
case NET_LABEL:
case NET_BUSLABELMEMBER:
case NET_PINLABEL:
case NET_GLOBBUSLABELMEMBER:
break;
case NET_HIERLABEL:
case NET_HIERBUSLABELMEMBER:
case NET_SHEETLABEL:
case NET_SHEETBUSLABELMEMBER:
// ERC problems when pin sheets do not match hierarchical labels.
// Each pin sheet must match a hierarchical label
// Each hierarchical label must match a pin sheet
objectsConnectedList->TestforNonOrphanLabel( net, nextNet );
break;
case NET_GLOBLABEL:
if( m_tstUniqueGlobalLabels )
objectsConnectedList->TestforNonOrphanLabel( net, nextNet );
break;
case NET_NOCONNECT:
// ERC problems when a noconnect symbol is connected to more than one pin.
MinConn = NET_NC;
if( objectsConnectedList->CountPinsInNet( nextNet ) > 1 )
Diagnose( objectsConnectedList->GetItem( net ), NULL, MinConn, UNC );
break;
case NET_PIN:
// Look for ERC problems between pins:
TestOthersItems( objectsConnectedList.get(), net, nextNet, &MinConn );
break;
}
lastNet = net;
}
// Test similar labels (i;e. labels which are identical when
// using case insensitive comparisons)
if( m_TestSimilarLabels )
objectsConnectedList->TestforSimilarLabels();
// Displays global results:
updateMarkerCounts( &screens );
// Display diags:
DisplayERC_MarkersList();
// Display new markers:
m_parent->GetCanvas()->Refresh();
if( m_writeErcFile )
{
fn = g_RootSheet->GetScreen()->GetFileName();
fn.SetExt( wxT( "erc" ) );
wxFileDialog dlg( this, _( "ERC File" ), fn.GetPath(), fn.GetFullName(),
_( "Electronic rule check file (.erc)|*.erc" ),
wxFD_SAVE );
if( dlg.ShowModal() == wxID_CANCEL )
return;
if( WriteDiagnosticERC( dlg.GetPath() ) )
{
Close( true );
ExecuteFile( this, Pgm().GetEditorName(), QuoteFullPath( fn ) );
}
}
}
void SCH_EDIT_FRAME::EndSegment( wxDC* DC )
{
SCH_SCREEN* screen = GetScreen();
SCH_LINE* segment = (SCH_LINE*) screen->GetCurItem();
if( segment == NULL || segment->Type() != SCH_LINE_T || !segment->IsNew() )
return;
// Delete zero length segments and clear item flags.
SCH_ITEM* item = s_wires.begin();
while( item )
{
item->ClearFlags();
wxCHECK_RET( item->Type() == SCH_LINE_T, wxT( "Unexpected object type in wire list." ) );
segment = (SCH_LINE*) item;
item = item->Next();
if( segment->IsNull() )
delete s_wires.Remove( segment );
}
if( s_wires.GetCount() == 0 )
return;
// Get the last non-null wire (this is the last created segment).
SetRepeatItem( segment = (SCH_LINE*) s_wires.GetLast() );
screen->SetCurItem( NULL );
m_canvas->EndMouseCapture( -1, -1, wxEmptyString, false );
// store the terminal point of this last segment: a junction could be needed
// (the last wire could be merged/deleted/modified, and lost)
wxPoint endpoint = segment->GetEndPoint();
// store the starting point of this first segment: a junction could be needed
SCH_LINE* firstsegment = (SCH_LINE*) s_wires.GetFirst();
wxPoint startPoint = firstsegment->GetStartPoint();
// Save the old wires for the undo command
DLIST< SCH_ITEM > oldWires; // stores here the old wires
GetScreen()->ExtractWires( oldWires, true ); // Save them in oldWires list
// Put the snap shot of the previous wire, buses, and junctions in the undo/redo list.
PICKED_ITEMS_LIST oldItems;
oldItems.m_Status = UR_WIRE_IMAGE;
while( oldWires.GetCount() != 0 )
{
ITEM_PICKER picker = ITEM_PICKER( oldWires.PopFront(), UR_WIRE_IMAGE );
oldItems.PushItem( picker );
}
SaveCopyInUndoList( oldItems, UR_WIRE_IMAGE );
// Remove segments backtracking over others
RemoveBacktracks( s_wires );
// Add the new wires
screen->Append( s_wires );
// Correct and remove segments that need to be merged.
screen->SchematicCleanUp();
// A junction could be needed to connect the end point of the last created segment.
if( screen->IsJunctionNeeded( endpoint ) )
screen->Append( AddJunction( DC, endpoint ) );
// A junction could be needed to connect the start point of the set of new created wires
if( screen->IsJunctionNeeded( startPoint ) )
screen->Append( AddJunction( DC, startPoint ) );
m_canvas->Refresh();
OnModify();
}
void DIALOG_ERC::TestErc( wxArrayString* aMessagesList )
{
wxFileName fn;
if( !DiagErcTableInit )
{
memcpy( DiagErc, DefaultDiagErc, sizeof(DefaultDiagErc) );
DiagErcTableInit = true;
}
m_writeErcFile = m_WriteResultOpt->GetValue();
/* Build the whole sheet list in hierarchy (sheet, not screen) */
SCH_SHEET_LIST sheets;
sheets.AnnotatePowerSymbols();
if( m_parent->CheckAnnotate( aMessagesList, false ) )
{
if( aMessagesList )
{
wxString msg = _( "Annotation required!" );
msg += wxT( "\n" );
aMessagesList->Add( msg );
}
return;
}
SCH_SCREENS screens;
// Erase all previous DRC markers.
screens.DeleteAllMarkers( MARK_ERC );
for( SCH_SCREEN* screen = screens.GetFirst(); screen != NULL; screen = screens.GetNext() )
{
/* Ff wire list has changed, delete Undo Redo list to avoid pointers on deleted
* data problems.
*/
if( screen->SchematicCleanUp( NULL ) )
screen->ClearUndoRedoList();
}
/* Test duplicate sheet names inside a given sheet, one cannot have sheets with
* duplicate names (file names can be duplicated).
*/
TestDuplicateSheetNames( true );
NETLIST_OBJECT_LIST* objectsConnectedList = m_parent->BuildNetListBase();
// Reset the connection type indicator
objectsConnectedList->ResetConnectionsType();
unsigned lastNet;
unsigned nextNet = lastNet = 0;
int NetNbItems = 0;
int MinConn = NOC;
for( unsigned net = 0; net < objectsConnectedList->size(); net++ )
{
if( objectsConnectedList->GetItemNet( lastNet ) !=
objectsConnectedList->GetItemNet( net ) )
{
// New net found:
MinConn = NOC;
NetNbItems = 0;
nextNet = net;
}
switch( objectsConnectedList->GetItemType( net ) )
{
// These items do not create erc problems
case NET_ITEM_UNSPECIFIED:
case NET_SEGMENT:
case NET_BUS:
case NET_JUNCTION:
case NET_LABEL:
case NET_BUSLABELMEMBER:
case NET_PINLABEL:
case NET_GLOBLABEL:
case NET_GLOBBUSLABELMEMBER:
break;
case NET_HIERLABEL:
case NET_HIERBUSLABELMEMBER:
case NET_SHEETLABEL:
case NET_SHEETBUSLABELMEMBER:
// ERC problems when pin sheets do not match hierarchical labels.
// Each pin sheet must match a hierarchical label
// Each hierarchical label must match a pin sheet
TestLabel( objectsConnectedList, net, nextNet );
break;
case NET_NOCONNECT:
// ERC problems when a noconnect symbol is connected to more than one pin.
MinConn = NET_NC;
if( NetNbItems != 0 )
Diagnose( objectsConnectedList->GetItem( net ), NULL, MinConn, UNC );
break;
case NET_PIN:
// Look for ERC problems between pins:
TestOthersItems( objectsConnectedList, net, nextNet, &NetNbItems, &MinConn );
break;
}
lastNet = net;
}
// Displays global results:
wxString num;
int markers = screens.GetMarkerCount();
int warnings = screens.GetMarkerCount( WAR );
num.Printf( wxT( "%d" ), markers );
m_TotalErrCount->SetLabel( num );
num.Printf( wxT( "%d" ), markers - warnings );
m_LastErrCount->SetLabel( num );
num.Printf( wxT( "%d" ), warnings );
m_LastWarningCount->SetLabel( num );
// Display diags:
DisplayERC_MarkersList();
// Display new markers:
m_parent->GetCanvas()->Refresh();
if( m_writeErcFile )
{
fn = g_RootSheet->GetScreen()->GetFileName();
fn.SetExt( wxT( "erc" ) );
wxFileDialog dlg( this, _( "ERC File" ), fn.GetPath(), fn.GetFullName(),
_( "Electronic rule check file (.erc)|*.erc" ),
wxFD_SAVE | wxFD_OVERWRITE_PROMPT );
if( dlg.ShowModal() == wxID_CANCEL )
return;
if( WriteDiagnosticERC( dlg.GetPath() ) )
{
Close( true );
ExecuteFile( this, wxGetApp().GetEditorName(), QuoteFullPath( fn ) );
}
}
}
