void DIALOG_ERC::TestErc( wxArrayString* aMessagesList ) { wxFileName fn; m_writeErcFile = m_WriteResultOpt->GetValue(); m_TestSimilarLabels = m_cbTestSimilarLabels->GetValue(); m_tstUniqueGlobalLabels = m_cbTestUniqueGlbLabels->GetValue(); // Build the whole sheet list in hierarchy (sheet, not screen) SCH_SHEET_LIST sheets; sheets.AnnotatePowerSymbols( Prj().SchLibs() ); if( m_parent->CheckAnnotate( aMessagesList, false ) ) { if( aMessagesList ) { wxString msg = _( "Annotation required!" ); msg += wxT( "\n" ); aMessagesList->Add( msg ); } return; } SCH_SCREENS screens; // Erase all previous DRC markers. screens.DeleteAllMarkers( MARKER_BASE::MARKER_ERC ); for( SCH_SCREEN* screen = screens.GetFirst(); screen != NULL; screen = screens.GetNext() ) { /* Ff wire list has changed, delete Undo Redo list to avoid pointers on deleted * data problems. */ if( screen->SchematicCleanUp( NULL ) ) screen->ClearUndoRedoList(); } /* Test duplicate sheet names inside a given sheet, one cannot have sheets with * duplicate names (file names can be duplicated). */ TestDuplicateSheetNames( true ); std::auto_ptr<NETLIST_OBJECT_LIST> objectsConnectedList( m_parent->BuildNetListBase() ); // Reset the connection type indicator objectsConnectedList->ResetConnectionsType(); unsigned lastNet; unsigned nextNet = lastNet = 0; int MinConn = NOC; for( unsigned net = 0; net < objectsConnectedList->size(); net++ ) { if( objectsConnectedList->GetItemNet( lastNet ) != objectsConnectedList->GetItemNet( net ) ) { // New net found: MinConn = NOC; nextNet = net; } switch( objectsConnectedList->GetItemType( net ) ) { // These items do not create erc problems case NET_ITEM_UNSPECIFIED: case NET_SEGMENT: case NET_BUS: case NET_JUNCTION: case NET_LABEL: case NET_BUSLABELMEMBER: case NET_PINLABEL: case NET_GLOBBUSLABELMEMBER: break; case NET_HIERLABEL: case NET_HIERBUSLABELMEMBER: case NET_SHEETLABEL: case NET_SHEETBUSLABELMEMBER: // ERC problems when pin sheets do not match hierarchical labels. // Each pin sheet must match a hierarchical label // Each hierarchical label must match a pin sheet objectsConnectedList->TestforNonOrphanLabel( net, nextNet ); break; case NET_GLOBLABEL: if( m_tstUniqueGlobalLabels ) objectsConnectedList->TestforNonOrphanLabel( net, nextNet ); break; case NET_NOCONNECT: // ERC problems when a noconnect symbol is connected to more than one pin. MinConn = NET_NC; if( objectsConnectedList->CountPinsInNet( nextNet ) > 1 ) Diagnose( objectsConnectedList->GetItem( net ), NULL, MinConn, UNC ); break; case NET_PIN: // Look for ERC problems between pins: TestOthersItems( objectsConnectedList.get(), net, nextNet, &MinConn ); break; } lastNet = net; } // Test similar labels (i;e. labels which are identical when // using case insensitive comparisons) if( m_TestSimilarLabels ) objectsConnectedList->TestforSimilarLabels(); // Displays global results: updateMarkerCounts( &screens ); // Display diags: DisplayERC_MarkersList(); // Display new markers: m_parent->GetCanvas()->Refresh(); if( m_writeErcFile ) { fn = g_RootSheet->GetScreen()->GetFileName(); fn.SetExt( wxT( "erc" ) ); wxFileDialog dlg( this, _( "ERC File" ), fn.GetPath(), fn.GetFullName(), _( "Electronic rule check file (.erc)|*.erc" ), wxFD_SAVE ); if( dlg.ShowModal() == wxID_CANCEL ) return; if( WriteDiagnosticERC( dlg.GetPath() ) ) { Close( true ); ExecuteFile( this, Pgm().GetEditorName(), QuoteFullPath( fn ) ); } } }
void SCH_EDIT_FRAME::EndSegment( wxDC* DC ) { SCH_SCREEN* screen = GetScreen(); SCH_LINE* segment = (SCH_LINE*) screen->GetCurItem(); if( segment == NULL || segment->Type() != SCH_LINE_T || !segment->IsNew() ) return; // Delete zero length segments and clear item flags. SCH_ITEM* item = s_wires.begin(); while( item ) { item->ClearFlags(); wxCHECK_RET( item->Type() == SCH_LINE_T, wxT( "Unexpected object type in wire list." ) ); segment = (SCH_LINE*) item; item = item->Next(); if( segment->IsNull() ) delete s_wires.Remove( segment ); } if( s_wires.GetCount() == 0 ) return; // Get the last non-null wire (this is the last created segment). SetRepeatItem( segment = (SCH_LINE*) s_wires.GetLast() ); screen->SetCurItem( NULL ); m_canvas->EndMouseCapture( -1, -1, wxEmptyString, false ); // store the terminal point of this last segment: a junction could be needed // (the last wire could be merged/deleted/modified, and lost) wxPoint endpoint = segment->GetEndPoint(); // store the starting point of this first segment: a junction could be needed SCH_LINE* firstsegment = (SCH_LINE*) s_wires.GetFirst(); wxPoint startPoint = firstsegment->GetStartPoint(); // Save the old wires for the undo command DLIST< SCH_ITEM > oldWires; // stores here the old wires GetScreen()->ExtractWires( oldWires, true ); // Save them in oldWires list // Put the snap shot of the previous wire, buses, and junctions in the undo/redo list. PICKED_ITEMS_LIST oldItems; oldItems.m_Status = UR_WIRE_IMAGE; while( oldWires.GetCount() != 0 ) { ITEM_PICKER picker = ITEM_PICKER( oldWires.PopFront(), UR_WIRE_IMAGE ); oldItems.PushItem( picker ); } SaveCopyInUndoList( oldItems, UR_WIRE_IMAGE ); // Remove segments backtracking over others RemoveBacktracks( s_wires ); // Add the new wires screen->Append( s_wires ); // Correct and remove segments that need to be merged. screen->SchematicCleanUp(); // A junction could be needed to connect the end point of the last created segment. if( screen->IsJunctionNeeded( endpoint ) ) screen->Append( AddJunction( DC, endpoint ) ); // A junction could be needed to connect the start point of the set of new created wires if( screen->IsJunctionNeeded( startPoint ) ) screen->Append( AddJunction( DC, startPoint ) ); m_canvas->Refresh(); OnModify(); }
void DIALOG_ERC::TestErc( wxArrayString* aMessagesList ) { wxFileName fn; if( !DiagErcTableInit ) { memcpy( DiagErc, DefaultDiagErc, sizeof(DefaultDiagErc) ); DiagErcTableInit = true; } m_writeErcFile = m_WriteResultOpt->GetValue(); /* Build the whole sheet list in hierarchy (sheet, not screen) */ SCH_SHEET_LIST sheets; sheets.AnnotatePowerSymbols(); if( m_parent->CheckAnnotate( aMessagesList, false ) ) { if( aMessagesList ) { wxString msg = _( "Annotation required!" ); msg += wxT( "\n" ); aMessagesList->Add( msg ); } return; } SCH_SCREENS screens; // Erase all previous DRC markers. screens.DeleteAllMarkers( MARK_ERC ); for( SCH_SCREEN* screen = screens.GetFirst(); screen != NULL; screen = screens.GetNext() ) { /* Ff wire list has changed, delete Undo Redo list to avoid pointers on deleted * data problems. */ if( screen->SchematicCleanUp( NULL ) ) screen->ClearUndoRedoList(); } /* Test duplicate sheet names inside a given sheet, one cannot have sheets with * duplicate names (file names can be duplicated). */ TestDuplicateSheetNames( true ); NETLIST_OBJECT_LIST* objectsConnectedList = m_parent->BuildNetListBase(); // Reset the connection type indicator objectsConnectedList->ResetConnectionsType(); unsigned lastNet; unsigned nextNet = lastNet = 0; int NetNbItems = 0; int MinConn = NOC; for( unsigned net = 0; net < objectsConnectedList->size(); net++ ) { if( objectsConnectedList->GetItemNet( lastNet ) != objectsConnectedList->GetItemNet( net ) ) { // New net found: MinConn = NOC; NetNbItems = 0; nextNet = net; } switch( objectsConnectedList->GetItemType( net ) ) { // These items do not create erc problems case NET_ITEM_UNSPECIFIED: case NET_SEGMENT: case NET_BUS: case NET_JUNCTION: case NET_LABEL: case NET_BUSLABELMEMBER: case NET_PINLABEL: case NET_GLOBLABEL: case NET_GLOBBUSLABELMEMBER: break; case NET_HIERLABEL: case NET_HIERBUSLABELMEMBER: case NET_SHEETLABEL: case NET_SHEETBUSLABELMEMBER: // ERC problems when pin sheets do not match hierarchical labels. // Each pin sheet must match a hierarchical label // Each hierarchical label must match a pin sheet TestLabel( objectsConnectedList, net, nextNet ); break; case NET_NOCONNECT: // ERC problems when a noconnect symbol is connected to more than one pin. MinConn = NET_NC; if( NetNbItems != 0 ) Diagnose( objectsConnectedList->GetItem( net ), NULL, MinConn, UNC ); break; case NET_PIN: // Look for ERC problems between pins: TestOthersItems( objectsConnectedList, net, nextNet, &NetNbItems, &MinConn ); break; } lastNet = net; } // Displays global results: wxString num; int markers = screens.GetMarkerCount(); int warnings = screens.GetMarkerCount( WAR ); num.Printf( wxT( "%d" ), markers ); m_TotalErrCount->SetLabel( num ); num.Printf( wxT( "%d" ), markers - warnings ); m_LastErrCount->SetLabel( num ); num.Printf( wxT( "%d" ), warnings ); m_LastWarningCount->SetLabel( num ); // Display diags: DisplayERC_MarkersList(); // Display new markers: m_parent->GetCanvas()->Refresh(); if( m_writeErcFile ) { fn = g_RootSheet->GetScreen()->GetFileName(); fn.SetExt( wxT( "erc" ) ); wxFileDialog dlg( this, _( "ERC File" ), fn.GetPath(), fn.GetFullName(), _( "Electronic rule check file (.erc)|*.erc" ), wxFD_SAVE | wxFD_OVERWRITE_PROMPT ); if( dlg.ShowModal() == wxID_CANCEL ) return; if( WriteDiagnosticERC( dlg.GetPath() ) ) { Close( true ); ExecuteFile( this, wxGetApp().GetEditorName(), QuoteFullPath( fn ) ); } } }