static bool innerPathOp(skiatest::Reporter* reporter, const SkPath& a, const SkPath& b,
        const SkPathOp shapeOp, const char* testName, bool expectSuccess) {
#if 0 && DEBUG_SHOW_TEST_NAME
    showName(a, b, shapeOp);
#endif
    SkPath out;
    if (!OpDebug(a, b, shapeOp, &out, expectSuccess  SkDEBUGPARAMS(testName))) {
        SkDebugf("%s did not expect failure\n", __FUNCTION__);
        REPORTER_ASSERT(reporter, 0);
        return false;
    }
    if (!reporter->verbose()) {
        return true;
    }
    SkPath pathOut, scaledPathOut;
    SkRegion rgnA, rgnB, openClip, rgnOut;
    openClip.setRect(-16000, -16000, 16000, 16000);
    rgnA.setPath(a, openClip);
    rgnB.setPath(b, openClip);
    rgnOut.op(rgnA, rgnB, (SkRegion::Op) shapeOp);
    rgnOut.getBoundaryPath(&pathOut);

    SkMatrix scale;
    scaleMatrix(a, b, scale);
    SkRegion scaledRgnA, scaledRgnB, scaledRgnOut;
    SkPath scaledA, scaledB;
    scaledA.addPath(a, scale);
    scaledA.setFillType(a.getFillType());
    scaledB.addPath(b, scale);
    scaledB.setFillType(b.getFillType());
    scaledRgnA.setPath(scaledA, openClip);
    scaledRgnB.setPath(scaledB, openClip);
    scaledRgnOut.op(scaledRgnA, scaledRgnB, (SkRegion::Op) shapeOp);
    scaledRgnOut.getBoundaryPath(&scaledPathOut);
    SkBitmap bitmap;
    SkPath scaledOut;
    scaledOut.addPath(out, scale);
    scaledOut.setFillType(out.getFillType());
    int result = comparePaths(reporter, testName, pathOut, scaledPathOut, out, scaledOut, bitmap,
            a, b, shapeOp, scale, expectSuccess);
    reporter->bumpTestCount();
    return result == 0;
}
Beispiel #2
0
bool SkHitTestPathEx(const SkPath& path, SkScalar x, SkScalar y) {
    bool isInverse = path.isInverseFillType();
    if (path.isEmpty()) {
        return isInverse;
    }
    
    const SkRect& bounds = path.getBounds();
    if (!bounds.contains(x, y)) {
        return isInverse;
    }

    SkPath::Iter iter(path, true);
    bool done = false;
    int w = 0;
    do {
        SkPoint pts[4];
        switch (iter.next(pts, false)) {
            case SkPath::kMove_Verb:
            case SkPath::kClose_Verb:
                break;
            case SkPath::kLine_Verb:
                w += winding_line(pts, x, y);
                break;
            case SkPath::kQuad_Verb:
                w += winding_quad(pts, x, y);
                break;
            case SkPath::kCubic_Verb:
                w += winding_cubic(pts, x, y);
                break;
            case SkPath::kDone_Verb:
                done = true;
                break;
        }
    } while (!done);

    switch (path.getFillType()) {
        case SkPath::kEvenOdd_FillType:
        case SkPath::kInverseEvenOdd_FillType:
            w &= 1;
            break;
        default:
            break;
    }
    return SkToBool(w);
}
Beispiel #3
0
static void drawAndTest(skiatest::Reporter* reporter, const SkPath& path,
                        const SkPaint& paint, bool shouldDraw) {
    SkBitmap bm;
    bm.allocN32Pixels(DIMENSION, DIMENSION);
    SkASSERT(DIMENSION*4 == bm.rowBytes()); // ensure no padding on each row
    bm.eraseColor(SK_ColorTRANSPARENT);

    SkCanvas canvas(bm);
    SkPaint p(paint);
    p.setColor(SK_ColorWHITE);

    canvas.drawPath(path, p);

    size_t count = DIMENSION * DIMENSION;
    const SkPMColor* ptr = bm.getAddr32(0, 0);

    SkPMColor andValue = ~0U;
    SkPMColor orValue = 0;
    for (size_t i = 0; i < count; ++i) {
        SkPMColor c = ptr[i];
        andValue &= c;
        orValue |= c;
    }

    // success means we drew everywhere or nowhere (depending on shouldDraw)
    bool success = shouldDraw ? (~0U == andValue) : (0 == orValue);

    if (!success) {
        const char* str;
        if (shouldDraw) {
            str = "Path expected to draw everywhere, but didn't. ";
        } else {
            str = "Path expected to draw nowhere, but did. ";
        }
        ERRORF(reporter, "%s style[%d] cap[%d] join[%d] antialias[%d]"
               " filltype[%d] ptcount[%d]", str, paint.getStyle(),
               paint.getStrokeCap(), paint.getStrokeJoin(),
               paint.isAntiAlias(), path.getFillType(), path.countPoints());
// uncomment this if you want to step in to see the failure
//        canvas.drawPath(path, p);
    }
}
void SkPDFDevice::drawPath(const SkDraw& d, const SkPath& path,
                           const SkPaint& paint, const SkMatrix* prePathMatrix,
                           bool pathIsMutable) {
    NOT_IMPLEMENTED(prePathMatrix != NULL, true);

    if (paint.getPathEffect()) {
        // Apply the path effect to path and draw it that way.
        SkPath noEffectPath;
        paint.getFillPath(path, &noEffectPath);

        SkPaint noEffectPaint(paint);
        SkSafeUnref(noEffectPaint.setPathEffect(NULL));
        drawPath(d, noEffectPath, noEffectPaint, NULL, true);
        return;
    }
    updateGSFromPaint(paint, false);

    SkPDFUtils::EmitPath(path, &fContent);
    SkPDFUtils::PaintPath(paint.getStyle(), path.getFillType(), &fContent);
}
Beispiel #5
0
void SkDebugCanvas::addPathData(const SkPath& path, const char* pathName) {
    SkPath::RawIter iter(path);
    SkPath::FillType fillType = path.getFillType();
    fClipStackData.appendf("%sSkPath %s;<br>", kHTML4SpaceIndent, pathName);
    fClipStackData.appendf("%s%s.setFillType(SkPath::%s);<br>", kHTML4SpaceIndent, pathName,
            gFillTypeStrs[fillType]);
    iter.setPath(path);
    uint8_t verb;
    SkPoint pts[4];
    while ((verb = iter.next(pts)) != SkPath::kDone_Verb) {
        switch (verb) {
            case SkPath::kMove_Verb:
                fClipStackData.appendf("%s%s.moveTo(", kHTML4SpaceIndent, pathName);
                this->outputPoints(&pts[0], 1);
                continue;
            case SkPath::kLine_Verb:
                fClipStackData.appendf("%s%s.lineTo(", kHTML4SpaceIndent, pathName);
                this->outputPoints(&pts[1], 1);
                break;
            case SkPath::kQuad_Verb:
                fClipStackData.appendf("%s%s.quadTo(", kHTML4SpaceIndent, pathName);
                this->outputPoints(&pts[1], 2);
                break;
            case SkPath::kConic_Verb:
                fClipStackData.appendf("%s%s.conicTo(", kHTML4SpaceIndent, pathName);
                this->outputConicPoints(&pts[1], iter.conicWeight());
                break;
            case SkPath::kCubic_Verb:
                fClipStackData.appendf("%s%s.cubicTo(", kHTML4SpaceIndent, pathName);
                this->outputPoints(&pts[1], 3);
                break;
            case SkPath::kClose_Verb:
                fClipStackData.appendf("%s%s.close();<br>", kHTML4SpaceIndent, pathName);
                break;
            default:
                SkDEBUGFAIL("bad verb");
                return;
        }
    }
}
PassRefPtr<JSONObject> LoggingCanvas::objectForSkPath(const SkPath& path)
{
    RefPtr<JSONObject> pathItem = JSONObject::create();
    pathItem->setString("fillType", fillTypeName(path.getFillType()));
    pathItem->setString("convexity", convexityName(path.getConvexity()));
    pathItem->setBoolean("isRect", path.isRect(0));
    SkPath::Iter iter(path, false);
    SkPoint points[4];
    RefPtr<JSONArray> pathPointsArray = JSONArray::create();
    for (SkPath::Verb verb = iter.next(points, false); verb != SkPath::kDone_Verb; verb = iter.next(points, false)) {
        VerbParams verbParams = segmentParams(verb);
        RefPtr<JSONObject> pathPointItem = JSONObject::create();
        pathPointItem->setString("verb", verbParams.name);
        ASSERT(verbParams.pointCount + verbParams.pointOffset <= WTF_ARRAY_LENGTH(points));
        pathPointItem->setArray("points", arrayForSkPoints(verbParams.pointCount, points + verbParams.pointOffset));
        if (SkPath::kConic_Verb == verb)
            pathPointItem->setNumber("conicWeight", iter.conicWeight());
        pathPointsArray->pushObject(pathPointItem);
    }
    pathItem->setArray("pathPoints", pathPointsArray);
    pathItem->setObject("bounds", objectForSkRect(path.getBounds()));
    return pathItem.release();
}
Beispiel #7
0
static void dontFailOne(skiatest::Reporter* reporter, int index) {
    SkPath path;
    int f = (int) (index % finitePtsCount);
    int g = (int) ((f + 1) % finitePtsCount);
    switch (index % 11) {
        case 0: path.lineTo(finitePts[f]); break;
        case 1: path.quadTo(finitePts[f], finitePts[f]); break;
        case 2: path.quadTo(finitePts[f], finitePts[g]); break;
        case 3: path.quadTo(finitePts[g], finitePts[f]); break;
        case 4: path.cubicTo(finitePts[f], finitePts[f], finitePts[f]); break;
        case 5: path.cubicTo(finitePts[f], finitePts[f], finitePts[g]); break;
        case 6: path.cubicTo(finitePts[f], finitePts[g], finitePts[f]); break;
        case 7: path.cubicTo(finitePts[f], finitePts[g], finitePts[g]); break;
        case 8: path.cubicTo(finitePts[g], finitePts[f], finitePts[f]); break;
        case 9: path.cubicTo(finitePts[g], finitePts[f], finitePts[g]); break;
        case 10: path.moveTo(finitePts[f]); break;
    }
    SkPath result;
    result.setFillType(SkPath::kWinding_FillType);
    bool success = Simplify(path, &result);
    REPORTER_ASSERT(reporter, success);
    REPORTER_ASSERT(reporter, result.getFillType() != SkPath::kWinding_FillType);
    reporter->bumpTestCount();
}
bool GrDefaultPathRenderer::internalDrawPath(GrDrawContext* drawContext,
                                             const GrPaint& paint,
                                             const GrUserStencilSettings& userStencilSettings,
                                             const GrClip& clip,
                                             const SkMatrix& viewMatrix,
                                             const GrShape& shape,
                                             bool stencilOnly) {
    SkPath path;
    shape.asPath(&path);

    SkScalar hairlineCoverage;
    uint8_t newCoverage = 0xff;
    bool isHairline = false;
    if (IsStrokeHairlineOrEquivalent(shape.style(), viewMatrix, &hairlineCoverage)) {
        newCoverage = SkScalarRoundToInt(hairlineCoverage * 0xff);
        isHairline = true;
    } else {
        SkASSERT(shape.style().isSimpleFill());
    }

    int                          passCount = 0;
    const GrUserStencilSettings* passes[3];
    GrDrawFace                   drawFace[3];
    bool                         reverse = false;
    bool                         lastPassIsBounds;

    if (isHairline) {
        passCount = 1;
        if (stencilOnly) {
            passes[0] = &gDirectToStencil;
        } else {
            passes[0] = &userStencilSettings;
        }
        lastPassIsBounds = false;
        drawFace[0] = GrDrawFace::kBoth;
    } else {
        if (single_pass_shape(shape)) {
            passCount = 1;
            if (stencilOnly) {
                passes[0] = &gDirectToStencil;
            } else {
                passes[0] = &userStencilSettings;
            }
            drawFace[0] = GrDrawFace::kBoth;
            lastPassIsBounds = false;
        } else {
            switch (path.getFillType()) {
                case SkPath::kInverseEvenOdd_FillType:
                    reverse = true;
                    // fallthrough
                case SkPath::kEvenOdd_FillType:
                    passes[0] = &gEOStencilPass;
                    if (stencilOnly) {
                        passCount = 1;
                        lastPassIsBounds = false;
                    } else {
                        passCount = 2;
                        lastPassIsBounds = true;
                        if (reverse) {
                            passes[1] = &gInvEOColorPass;
                        } else {
                            passes[1] = &gEOColorPass;
                        }
                    }
                    drawFace[0] = drawFace[1] = GrDrawFace::kBoth;
                    break;

                case SkPath::kInverseWinding_FillType:
                    reverse = true;
                    // fallthrough
                case SkPath::kWinding_FillType:
                    if (fSeparateStencil) {
                        if (fStencilWrapOps) {
                            passes[0] = &gWindStencilSeparateWithWrap;
                        } else {
                            passes[0] = &gWindStencilSeparateNoWrap;
                        }
                        passCount = 2;
                        drawFace[0] = GrDrawFace::kBoth;
                    } else {
                        if (fStencilWrapOps) {
                            passes[0] = &gWindSingleStencilWithWrapInc;
                            passes[1] = &gWindSingleStencilWithWrapDec;
                        } else {
                            passes[0] = &gWindSingleStencilNoWrapInc;
                            passes[1] = &gWindSingleStencilNoWrapDec;
                        }
                        // which is cw and which is ccw is arbitrary.
                        drawFace[0] = GrDrawFace::kCW;
                        drawFace[1] = GrDrawFace::kCCW;
                        passCount = 3;
                    }
                    if (stencilOnly) {
                        lastPassIsBounds = false;
                        --passCount;
                    } else {
                        lastPassIsBounds = true;
                        drawFace[passCount-1] = GrDrawFace::kBoth;
                        if (reverse) {
                            passes[passCount-1] = &gInvWindColorPass;
                        } else {
                            passes[passCount-1] = &gWindColorPass;
                        }
                    }
                    break;
                default:
                    SkDEBUGFAIL("Unknown path fFill!");
                    return false;
            }
        }
    }

    SkScalar tol = GrPathUtils::kDefaultTolerance;
    SkScalar srcSpaceTol = GrPathUtils::scaleToleranceToSrc(tol, viewMatrix, path.getBounds());

    SkRect devBounds;
    GetPathDevBounds(path, drawContext->width(), drawContext->height(), viewMatrix, &devBounds);

    for (int p = 0; p < passCount; ++p) {
        if (lastPassIsBounds && (p == passCount-1)) {
            SkRect bounds;
            SkMatrix localMatrix = SkMatrix::I();
            if (reverse) {
                // draw over the dev bounds (which will be the whole dst surface for inv fill).
                bounds = devBounds;
                SkMatrix vmi;
                // mapRect through persp matrix may not be correct
                if (!viewMatrix.hasPerspective() && viewMatrix.invert(&vmi)) {
                    vmi.mapRect(&bounds);
                } else {
                    if (!viewMatrix.invert(&localMatrix)) {
                        return false;
                    }
                }
            } else {
                bounds = path.getBounds();
            }
            const SkMatrix& viewM = (reverse && viewMatrix.hasPerspective()) ? SkMatrix::I() :
                                                                               viewMatrix;
            SkAutoTUnref<GrDrawBatch> batch(
                    GrRectBatchFactory::CreateNonAAFill(paint.getColor(), viewM, bounds, nullptr,
                                                        &localMatrix));

            SkASSERT(GrDrawFace::kBoth == drawFace[p]);
            GrPipelineBuilder pipelineBuilder(paint, drawContext->mustUseHWAA(paint));
            pipelineBuilder.setDrawFace(drawFace[p]);
            pipelineBuilder.setUserStencil(passes[p]);

            drawContext->drawBatch(pipelineBuilder, clip, batch);
        } else {
            SkAutoTUnref<GrDrawBatch> batch(new DefaultPathBatch(paint.getColor(), path,
                                                                 srcSpaceTol,
                                                                 newCoverage, viewMatrix,
                                                                 isHairline, devBounds));

            GrPipelineBuilder pipelineBuilder(paint, drawContext->mustUseHWAA(paint));
            pipelineBuilder.setDrawFace(drawFace[p]);
            pipelineBuilder.setUserStencil(passes[p]);
            if (passCount > 1) {
                pipelineBuilder.setDisableColorXPFactory();
            }

            drawContext->drawBatch(pipelineBuilder, clip, batch);
        }
    }
    return true;
}
bool GrStencilAndCoverPathRenderer::onDrawPath(GrDrawTarget* target,
                                               GrPipelineBuilder* pipelineBuilder,
                                               GrColor color,
                                               const SkMatrix& viewMatrix,
                                               const SkPath& path,
                                               const GrStrokeInfo& stroke,
                                               bool antiAlias) {
    SkASSERT(!antiAlias);
    SkASSERT(!stroke.getStrokeRec().isHairlineStyle());
    SkASSERT(!stroke.isDashed());
    SkASSERT(pipelineBuilder->getStencil().isDisabled());

    SkAutoTUnref<GrPath> p(get_gr_path(fGpu, path, stroke.getStrokeRec()));

    if (path.isInverseFillType()) {
        GR_STATIC_CONST_SAME_STENCIL(kInvertedStencilPass,
            kZero_StencilOp,
            kZero_StencilOp,
            // We know our rect will hit pixels outside the clip and the user bits will be 0
            // outside the clip. So we can't just fill where the user bits are 0. We also need to
            // check that the clip bit is set.
            kEqualIfInClip_StencilFunc,
            0xffff,
            0x0000,
            0xffff);

        pipelineBuilder->setStencil(kInvertedStencilPass);

        // fake inverse with a stencil and cover
        SkAutoTUnref<GrPathProcessor> pp(GrPathProcessor::Create(GrColor_WHITE, viewMatrix));
        target->stencilPath(pipelineBuilder, pp, p, convert_skpath_filltype(path.getFillType()));

        SkMatrix invert = SkMatrix::I();
        SkRect bounds =
            SkRect::MakeLTRB(0, 0, SkIntToScalar(pipelineBuilder->getRenderTarget()->width()),
                             SkIntToScalar(pipelineBuilder->getRenderTarget()->height()));
        SkMatrix vmi;
        // mapRect through persp matrix may not be correct
        if (!viewMatrix.hasPerspective() && viewMatrix.invert(&vmi)) {
            vmi.mapRect(&bounds);
            // theoretically could set bloat = 0, instead leave it because of matrix inversion
            // precision.
            SkScalar bloat = viewMatrix.getMaxScale() * SK_ScalarHalf;
            bounds.outset(bloat, bloat);
        } else {
            if (!viewMatrix.invert(&invert)) {
                return false;
            }
        }
        const SkMatrix& viewM = viewMatrix.hasPerspective() ? SkMatrix::I() : viewMatrix;
        target->drawRect(pipelineBuilder, color, viewM, bounds, NULL, &invert);
    } else {
        GR_STATIC_CONST_SAME_STENCIL(kStencilPass,
            kZero_StencilOp,
            kZero_StencilOp,
            kNotEqual_StencilFunc,
            0xffff,
            0x0000,
            0xffff);

        pipelineBuilder->setStencil(kStencilPass);
        SkAutoTUnref<GrPathProcessor> pp(GrPathProcessor::Create(color, viewMatrix));
        target->drawPath(pipelineBuilder, pp, p, convert_skpath_filltype(path.getFillType()));
    }

    pipelineBuilder->stencil()->setDisabled();
    return true;
}
Beispiel #10
0
static bool get_geometry(const SkPath& path, const SkMatrix& m, PLSVertices& triVertices, 
                         PLSVertices& quadVertices, GrResourceProvider* resourceProvider,
                         SkRect bounds) {
    SkScalar screenSpaceTol = GrPathUtils::kDefaultTolerance;
    SkScalar tol = GrPathUtils::scaleToleranceToSrc(screenSpaceTol, m, bounds);
    int contourCnt;
    int maxPts = GrPathUtils::worstCasePointCount(path, &contourCnt, tol);
    if (maxPts <= 0) {
        return 0;
    }
    SkPath linesOnlyPath;
    linesOnlyPath.setFillType(path.getFillType());
    SkSTArray<15, SkPoint, true> quadPoints;
    SkPath::Iter iter(path, true);
    bool done = false;
    while (!done) {
        SkPoint pts[4];
        SkPath::Verb verb = iter.next(pts);
        switch (verb) {
            case SkPath::kMove_Verb:
                SkASSERT(quadPoints.count() % 3 == 0);
                for (int i = 0; i < quadPoints.count(); i += 3) {
                    add_quad(&quadPoints[i], quadVertices);
                }
                quadPoints.reset();
                m.mapPoints(&pts[0], 1);
                linesOnlyPath.moveTo(pts[0]);
                break;
            case SkPath::kLine_Verb:
                m.mapPoints(&pts[1], 1);
                linesOnlyPath.lineTo(pts[1]);
                break;
            case SkPath::kQuad_Verb:
                m.mapPoints(pts, 3);
                linesOnlyPath.lineTo(pts[2]);
                quadPoints.push_back(pts[0]);
                quadPoints.push_back(pts[1]);
                quadPoints.push_back(pts[2]);
                break;
            case SkPath::kCubic_Verb: {
                m.mapPoints(pts, 4);
                SkSTArray<15, SkPoint, true> quads;
                GrPathUtils::convertCubicToQuads(pts, kCubicTolerance, &quads);
                int count = quads.count();
                for (int q = 0; q < count; q += 3) {
                    linesOnlyPath.lineTo(quads[q + 2]);
                    quadPoints.push_back(quads[q]);
                    quadPoints.push_back(quads[q + 1]);
                    quadPoints.push_back(quads[q + 2]);
                }
                break;
            }
            case SkPath::kConic_Verb: {
                m.mapPoints(pts, 3);
                SkScalar weight = iter.conicWeight();
                SkAutoConicToQuads converter;
                const SkPoint* quads = converter.computeQuads(pts, weight, kConicTolerance);
                int count = converter.countQuads();
                for (int i = 0; i < count; ++i) {
                    linesOnlyPath.lineTo(quads[2 * i + 2]);
                    quadPoints.push_back(quads[2 * i]);
                    quadPoints.push_back(quads[2 * i + 1]);
                    quadPoints.push_back(quads[2 * i + 2]);
                }
                break;
            }
            case SkPath::kClose_Verb:
                linesOnlyPath.close();
                break;
            case SkPath::kDone_Verb:
                done = true;
                break;
            default: SkASSERT(false);
        }
    }
    SkASSERT(quadPoints.count() % 3 == 0);
    for (int i = 0; i < quadPoints.count(); i += 3) {
        add_quad(&quadPoints[i], quadVertices);
    }

    static const GrUniqueKey::Domain kDomain = GrUniqueKey::GenerateDomain();
    GrUniqueKey key;
    GrUniqueKey::Builder builder(&key, kDomain, 2);
    builder[0] = path.getGenerationID();
    builder[1] = path.getFillType();
    builder.finish();
    GrTessellator::WindingVertex* windingVertices;
    int triVertexCount = GrTessellator::PathToVertices(linesOnlyPath, 0, bounds, &windingVertices);
    if (triVertexCount > 0) {
        for (int i = 0; i < triVertexCount; i += 3) {
            SkPoint p1 = windingVertices[i].fPos;
            SkPoint p2 = windingVertices[i + 1].fPos;
            SkPoint p3 = windingVertices[i + 2].fPos;
            int winding = windingVertices[i].fWinding;
            SkASSERT(windingVertices[i + 1].fWinding == winding);
            SkASSERT(windingVertices[i + 2].fWinding == winding);
            SkScalar cross = (p2 - p1).cross(p3 - p1);
            SkPoint bloated[3] = { p1, p2, p3 };
            if (cross < 0.0f) {
                SkTSwap(p1, p3);
            }
            if (bloat_tri(bloated)) {
                triVertices.push_back({ bloated[0], p1, p2, p3, winding });
                triVertices.push_back({ bloated[1], p1, p2, p3, winding });
                triVertices.push_back({ bloated[2], p1, p2, p3, winding });
            }
            else {
                SkScalar minX = SkTMin(p1.fX, SkTMin(p2.fX, p3.fX)) - 1.0f;
                SkScalar minY = SkTMin(p1.fY, SkTMin(p2.fY, p3.fY)) - 1.0f;
                SkScalar maxX = SkTMax(p1.fX, SkTMax(p2.fX, p3.fX)) + 1.0f;
                SkScalar maxY = SkTMax(p1.fY, SkTMax(p2.fY, p3.fY)) + 1.0f;
                triVertices.push_back({ { minX, minY }, p1, p2, p3, winding });
                triVertices.push_back({ { maxX, minY }, p1, p2, p3, winding });
                triVertices.push_back({ { minX, maxY }, p1, p2, p3, winding });
                triVertices.push_back({ { maxX, minY }, p1, p2, p3, winding });
                triVertices.push_back({ { maxX, maxY }, p1, p2, p3, winding });
                triVertices.push_back({ { minX, maxY }, p1, p2, p3, winding });
            }
        }
        delete[] windingVertices;
    }
    return triVertexCount > 0 || quadVertices.count() > 0;
}
bool GrStencilAndCoverPathRenderer::onDrawPath(const SkPath& path,
                                               const SkStrokeRec& stroke,
                                               GrDrawTarget* target,
                                               bool antiAlias) {
    SkASSERT(!antiAlias);
    SkASSERT(!stroke.isHairlineStyle());

    GrDrawState* drawState = target->drawState();
    SkASSERT(drawState->getStencil().isDisabled());

    SkAutoTUnref<GrPath> p(fGpu->createPath(path));

    SkPath::FillType nonInvertedFill = SkPath::ConvertToNonInverseFillType(path.getFillType());
    target->stencilPath(p, stroke, nonInvertedFill);

    // TODO: Use built in cover operation rather than a rect draw. This will require making our
    // fragment shaders be able to eat varyings generated by a matrix.

    // fill the path, zero out the stencil
    SkRect bounds = p->getBounds();
    SkScalar bloat = drawState->getViewMatrix().getMaxStretch() * SK_ScalarHalf;
    GrDrawState::AutoViewMatrixRestore avmr;

    if (nonInvertedFill == path.getFillType()) {
        GR_STATIC_CONST_SAME_STENCIL(kStencilPass,
            kZero_StencilOp,
            kZero_StencilOp,
            kNotEqual_StencilFunc,
            0xffff,
            0x0000,
            0xffff);
        *drawState->stencil() = kStencilPass;
    } else {
        GR_STATIC_CONST_SAME_STENCIL(kInvertedStencilPass,
            kZero_StencilOp,
            kZero_StencilOp,
            // We know our rect will hit pixels outside the clip and the user bits will be 0
            // outside the clip. So we can't just fill where the user bits are 0. We also need to
            // check that the clip bit is set.
            kEqualIfInClip_StencilFunc,
            0xffff,
            0x0000,
            0xffff);
        SkMatrix vmi;
        bounds.setLTRB(0, 0,
                       SkIntToScalar(drawState->getRenderTarget()->width()),
                       SkIntToScalar(drawState->getRenderTarget()->height()));
        // mapRect through persp matrix may not be correct
        if (!drawState->getViewMatrix().hasPerspective() && drawState->getViewInverse(&vmi)) {
            vmi.mapRect(&bounds);
            // theoretically could set bloat = 0, instead leave it because of matrix inversion
            // precision.
        } else {
            avmr.setIdentity(drawState);
            bloat = 0;
        }
        *drawState->stencil() = kInvertedStencilPass;
    }
    bounds.outset(bloat, bloat);
    target->drawSimpleRect(bounds, NULL);
    target->drawState()->stencil()->setDisabled();
    return true;
}
bool GrDefaultPathRenderer::internalDrawPath(GrDrawTarget* target,
                                             GrPipelineBuilder* pipelineBuilder,
                                             GrColor color,
                                             const SkMatrix& viewMatrix,
                                             const SkPath& path,
                                             const GrStrokeInfo& origStroke,
                                             bool stencilOnly) {
    SkTCopyOnFirstWrite<GrStrokeInfo> stroke(origStroke);

    SkScalar hairlineCoverage;
    uint8_t newCoverage = 0xff;
    if (IsStrokeHairlineOrEquivalent(*stroke, viewMatrix, &hairlineCoverage)) {
        newCoverage = SkScalarRoundToInt(hairlineCoverage * 0xff);

        if (!stroke->getStrokeRec().isHairlineStyle()) {
            stroke.writable()->getStrokeRecPtr()->setHairlineStyle();
        }
    }

    const bool isHairline = stroke->getStrokeRec().isHairlineStyle();

    // Save the current xp on the draw state so we can reset it if needed
    SkAutoTUnref<const GrXPFactory> backupXPFactory(SkRef(pipelineBuilder->getXPFactory()));
    // face culling doesn't make sense here
    SkASSERT(GrPipelineBuilder::kBoth_DrawFace == pipelineBuilder->getDrawFace());

    int                         passCount = 0;
    const GrStencilSettings*    passes[3];
    GrPipelineBuilder::DrawFace drawFace[3];
    bool                        reverse = false;
    bool                        lastPassIsBounds;

    if (isHairline) {
        passCount = 1;
        if (stencilOnly) {
            passes[0] = &gDirectToStencil;
        } else {
            passes[0] = NULL;
        }
        lastPassIsBounds = false;
        drawFace[0] = GrPipelineBuilder::kBoth_DrawFace;
    } else {
        if (single_pass_path(path, stroke->getStrokeRec())) {
            passCount = 1;
            if (stencilOnly) {
                passes[0] = &gDirectToStencil;
            } else {
                passes[0] = NULL;
            }
            drawFace[0] = GrPipelineBuilder::kBoth_DrawFace;
            lastPassIsBounds = false;
        } else {
            switch (path.getFillType()) {
                case SkPath::kInverseEvenOdd_FillType:
                    reverse = true;
                    // fallthrough
                case SkPath::kEvenOdd_FillType:
                    passes[0] = &gEOStencilPass;
                    if (stencilOnly) {
                        passCount = 1;
                        lastPassIsBounds = false;
                    } else {
                        passCount = 2;
                        lastPassIsBounds = true;
                        if (reverse) {
                            passes[1] = &gInvEOColorPass;
                        } else {
                            passes[1] = &gEOColorPass;
                        }
                    }
                    drawFace[0] = drawFace[1] = GrPipelineBuilder::kBoth_DrawFace;
                    break;

                case SkPath::kInverseWinding_FillType:
                    reverse = true;
                    // fallthrough
                case SkPath::kWinding_FillType:
                    if (fSeparateStencil) {
                        if (fStencilWrapOps) {
                            passes[0] = &gWindStencilSeparateWithWrap;
                        } else {
                            passes[0] = &gWindStencilSeparateNoWrap;
                        }
                        passCount = 2;
                        drawFace[0] = GrPipelineBuilder::kBoth_DrawFace;
                    } else {
                        if (fStencilWrapOps) {
                            passes[0] = &gWindSingleStencilWithWrapInc;
                            passes[1] = &gWindSingleStencilWithWrapDec;
                        } else {
                            passes[0] = &gWindSingleStencilNoWrapInc;
                            passes[1] = &gWindSingleStencilNoWrapDec;
                        }
                        // which is cw and which is ccw is arbitrary.
                        drawFace[0] = GrPipelineBuilder::kCW_DrawFace;
                        drawFace[1] = GrPipelineBuilder::kCCW_DrawFace;
                        passCount = 3;
                    }
                    if (stencilOnly) {
                        lastPassIsBounds = false;
                        --passCount;
                    } else {
                        lastPassIsBounds = true;
                        drawFace[passCount-1] = GrPipelineBuilder::kBoth_DrawFace;
                        if (reverse) {
                            passes[passCount-1] = &gInvWindColorPass;
                        } else {
                            passes[passCount-1] = &gWindColorPass;
                        }
                    }
                    break;
                default:
                    SkDEBUGFAIL("Unknown path fFill!");
                    return false;
            }
        }
    }

    SkScalar tol = GrPathUtils::kDefaultTolerance;
    SkScalar srcSpaceTol = GrPathUtils::scaleToleranceToSrc(tol, viewMatrix, path.getBounds());

    SkRect devBounds;
    GetPathDevBounds(path, pipelineBuilder->getRenderTarget(), viewMatrix, &devBounds);

    for (int p = 0; p < passCount; ++p) {
        pipelineBuilder->setDrawFace(drawFace[p]);
        if (passes[p]) {
            *pipelineBuilder->stencil() = *passes[p];
        }

        if (lastPassIsBounds && (p == passCount-1)) {
            // Reset the XP Factory on pipelineBuilder
            pipelineBuilder->setXPFactory(backupXPFactory);
            SkRect bounds;
            SkMatrix localMatrix = SkMatrix::I();
            if (reverse) {
                SkASSERT(pipelineBuilder->getRenderTarget());
                // draw over the dev bounds (which will be the whole dst surface for inv fill).
                bounds = devBounds;
                SkMatrix vmi;
                // mapRect through persp matrix may not be correct
                if (!viewMatrix.hasPerspective() && viewMatrix.invert(&vmi)) {
                    vmi.mapRect(&bounds);
                } else {
                    if (!viewMatrix.invert(&localMatrix)) {
                        return false;
                    }
                }
            } else {
                bounds = path.getBounds();
            }
            const SkMatrix& viewM = (reverse && viewMatrix.hasPerspective()) ? SkMatrix::I() :
                                                                               viewMatrix;
            target->drawRect(pipelineBuilder, color, viewM, bounds, NULL, &localMatrix);
        } else {
            if (passCount > 1) {
                pipelineBuilder->setDisableColorXPFactory();
            }

            DefaultPathBatch::Geometry geometry;
            geometry.fColor = color;
            geometry.fPath = path;
            geometry.fTolerance = srcSpaceTol;

            SkAutoTUnref<GrBatch> batch(DefaultPathBatch::Create(geometry, newCoverage, viewMatrix,
                                                                 isHairline, devBounds));

            target->drawBatch(pipelineBuilder, batch);
        }
    }
    return true;
}
bool GrStencilAndCoverPathRenderer::onDrawPath(const SkPath& path,
                                               const SkStrokeRec& stroke,
                                               GrDrawTarget* target,
                                               bool antiAlias) {
    SkASSERT(!antiAlias);
    SkASSERT(!stroke.isHairlineStyle());

    GrDrawState* drawState = target->drawState();
    SkASSERT(drawState->getStencil().isDisabled());

    SkAutoTUnref<GrPath> p(get_gr_path(fGpu, path, stroke));

    if (path.isInverseFillType()) {
        GR_STATIC_CONST_SAME_STENCIL(kInvertedStencilPass,
            kZero_StencilOp,
            kZero_StencilOp,
            // We know our rect will hit pixels outside the clip and the user bits will be 0
            // outside the clip. So we can't just fill where the user bits are 0. We also need to
            // check that the clip bit is set.
            kEqualIfInClip_StencilFunc,
            0xffff,
            0x0000,
            0xffff);

        drawState->setStencil(kInvertedStencilPass);

        // fake inverse with a stencil and cover
        target->stencilPath(p, convert_skpath_filltype(path.getFillType()));

        GrDrawState::AutoViewMatrixRestore avmr;
        SkRect bounds = SkRect::MakeLTRB(0, 0,
                                         SkIntToScalar(drawState->getRenderTarget()->width()),
                                         SkIntToScalar(drawState->getRenderTarget()->height()));
        SkMatrix vmi;
        // mapRect through persp matrix may not be correct
        if (!drawState->getViewMatrix().hasPerspective() && drawState->getViewInverse(&vmi)) {
            vmi.mapRect(&bounds);
            // theoretically could set bloat = 0, instead leave it because of matrix inversion
            // precision.
            SkScalar bloat = drawState->getViewMatrix().getMaxScale() * SK_ScalarHalf;
            bounds.outset(bloat, bloat);
        } else {
            avmr.setIdentity(drawState);
        }
        target->drawSimpleRect(bounds);
    } else {
        GR_STATIC_CONST_SAME_STENCIL(kStencilPass,
            kZero_StencilOp,
            kZero_StencilOp,
            kNotEqual_StencilFunc,
            0xffff,
            0x0000,
            0xffff);

        drawState->setStencil(kStencilPass);
        target->drawPath(p, convert_skpath_filltype(path.getFillType()));
    }

    target->drawState()->stencil()->setDisabled();
    return true;
}
Beispiel #14
0
Json::Value SkJSONCanvas::makePath(const SkPath& path) {
    Json::Value result(Json::objectValue);
    switch (path.getFillType()) {
        case SkPath::kWinding_FillType:
            result[SKJSONCANVAS_ATTRIBUTE_FILLTYPE] = SKJSONCANVAS_FILLTYPE_WINDING;
            break;
        case SkPath::kEvenOdd_FillType:
            result[SKJSONCANVAS_ATTRIBUTE_FILLTYPE] = SKJSONCANVAS_FILLTYPE_EVENODD;
            break;
        case SkPath::kInverseWinding_FillType:
            result[SKJSONCANVAS_ATTRIBUTE_FILLTYPE] = SKJSONCANVAS_FILLTYPE_INVERSEWINDING;
            break;
        case SkPath::kInverseEvenOdd_FillType:
            result[SKJSONCANVAS_ATTRIBUTE_FILLTYPE] = SKJSONCANVAS_FILLTYPE_INVERSEEVENODD;
            break;
    }    
    Json::Value verbs(Json::arrayValue);
    SkPath::Iter iter(path, false);
    SkPoint pts[4];
    SkPath::Verb verb;
    while ((verb = iter.next(pts)) != SkPath::kDone_Verb) {
        switch (verb) {
            case SkPath::kLine_Verb: {
                Json::Value line(Json::objectValue);
                line[SKJSONCANVAS_VERB_LINE] = this->makePoint(pts[1]);
                verbs.append(line);
                break;
            }
            case SkPath::kQuad_Verb: {
                Json::Value quad(Json::objectValue);
                Json::Value coords(Json::arrayValue);
                coords.append(this->makePoint(pts[1]));
                coords.append(this->makePoint(pts[2]));
                quad[SKJSONCANVAS_VERB_QUAD] = coords;
                verbs.append(quad);
                break;
            }
            case SkPath::kCubic_Verb: {
                Json::Value cubic(Json::objectValue);
                Json::Value coords(Json::arrayValue);
                coords.append(this->makePoint(pts[1]));
                coords.append(this->makePoint(pts[2]));
                coords.append(this->makePoint(pts[3]));
                cubic[SKJSONCANVAS_VERB_CUBIC] = coords;
                verbs.append(cubic);
                break;
            }
            case SkPath::kConic_Verb: {
                Json::Value conic(Json::objectValue);
                Json::Value coords(Json::arrayValue);
                coords.append(this->makePoint(pts[1]));
                coords.append(this->makePoint(pts[2]));
                coords.append(Json::Value(iter.conicWeight()));
                conic[SKJSONCANVAS_VERB_CONIC] = coords;
                verbs.append(conic);
                break;
            }
            case SkPath::kMove_Verb: {
                Json::Value move(Json::objectValue);
                move[SKJSONCANVAS_VERB_MOVE] = this->makePoint(pts[0]);
                verbs.append(move);
                break;
            }
            case SkPath::kClose_Verb:
                verbs.append(Json::Value(SKJSONCANVAS_VERB_CLOSE));
                break;
            case SkPath::kDone_Verb:
                break;
        }
    }
    result[SKJSONCANVAS_ATTRIBUTE_VERBS] = verbs;
    return result;
}
Beispiel #15
0
bool GrDefaultPathRenderer::internalDrawPath(GrRenderTargetContext* renderTargetContext,
                                             GrPaint&& paint,
                                             GrAAType aaType,
                                             const GrUserStencilSettings& userStencilSettings,
                                             const GrClip& clip,
                                             const SkMatrix& viewMatrix,
                                             const GrShape& shape,
                                             bool stencilOnly) {
    auto context = renderTargetContext->surfPriv().getContext();

    SkASSERT(GrAAType::kCoverage != aaType);
    SkPath path;
    shape.asPath(&path);

    SkScalar hairlineCoverage;
    uint8_t newCoverage = 0xff;
    bool isHairline = false;
    if (IsStrokeHairlineOrEquivalent(shape.style(), viewMatrix, &hairlineCoverage)) {
        newCoverage = SkScalarRoundToInt(hairlineCoverage * 0xff);
        isHairline = true;
    } else {
        SkASSERT(shape.style().isSimpleFill());
    }

    int                          passCount = 0;
    const GrUserStencilSettings* passes[2];
    bool                         reverse = false;
    bool                         lastPassIsBounds;

    if (isHairline) {
        passCount = 1;
        if (stencilOnly) {
            passes[0] = &gDirectToStencil;
        } else {
            passes[0] = &userStencilSettings;
        }
        lastPassIsBounds = false;
    } else {
        if (single_pass_shape(shape)) {
            passCount = 1;
            if (stencilOnly) {
                passes[0] = &gDirectToStencil;
            } else {
                passes[0] = &userStencilSettings;
            }
            lastPassIsBounds = false;
        } else {
            switch (path.getFillType()) {
                case SkPath::kInverseEvenOdd_FillType:
                    reverse = true;
                    // fallthrough
                case SkPath::kEvenOdd_FillType:
                    passes[0] = &gEOStencilPass;
                    if (stencilOnly) {
                        passCount = 1;
                        lastPassIsBounds = false;
                    } else {
                        passCount = 2;
                        lastPassIsBounds = true;
                        if (reverse) {
                            passes[1] = &gInvEOColorPass;
                        } else {
                            passes[1] = &gEOColorPass;
                        }
                    }
                    break;

                case SkPath::kInverseWinding_FillType:
                    reverse = true;
                    // fallthrough
                case SkPath::kWinding_FillType:
                    passes[0] = &gWindStencilPass;
                    passCount = 2;
                    if (stencilOnly) {
                        lastPassIsBounds = false;
                        --passCount;
                    } else {
                        lastPassIsBounds = true;
                        if (reverse) {
                            passes[passCount-1] = &gInvWindColorPass;
                        } else {
                            passes[passCount-1] = &gWindColorPass;
                        }
                    }
                    break;
                default:
                    SkDEBUGFAIL("Unknown path fFill!");
                    return false;
            }
        }
    }

    SkScalar tol = GrPathUtils::kDefaultTolerance;
    SkScalar srcSpaceTol = GrPathUtils::scaleToleranceToSrc(tol, viewMatrix, path.getBounds());

    SkRect devBounds;
    GetPathDevBounds(path,
                     renderTargetContext->asRenderTargetProxy()->worstCaseWidth(),
                     renderTargetContext->asRenderTargetProxy()->worstCaseHeight(),
                     viewMatrix, &devBounds);

    for (int p = 0; p < passCount; ++p) {
        if (lastPassIsBounds && (p == passCount-1)) {
            SkRect bounds;
            SkMatrix localMatrix = SkMatrix::I();
            if (reverse) {
                // draw over the dev bounds (which will be the whole dst surface for inv fill).
                bounds = devBounds;
                SkMatrix vmi;
                // mapRect through persp matrix may not be correct
                if (!viewMatrix.hasPerspective() && viewMatrix.invert(&vmi)) {
                    vmi.mapRect(&bounds);
                } else {
                    if (!viewMatrix.invert(&localMatrix)) {
                        return false;
                    }
                }
            } else {
                bounds = path.getBounds();
            }
            const SkMatrix& viewM = (reverse && viewMatrix.hasPerspective()) ? SkMatrix::I() :
                                                                               viewMatrix;
            // This is a non-coverage aa rect op since we assert aaType != kCoverage at the start
            assert_alive(paint);
            renderTargetContext->priv().stencilRect(clip, passes[p], std::move(paint),
                    GrAA(aaType == GrAAType::kMSAA), viewM, bounds, &localMatrix);
        } else {
            bool stencilPass = stencilOnly || passCount > 1;
            std::unique_ptr<GrDrawOp> op;
            if (stencilPass) {
                GrPaint stencilPaint;
                stencilPaint.setXPFactory(GrDisableColorXPFactory::Get());
                op = DefaultPathOp::Make(context, std::move(stencilPaint), path, srcSpaceTol,
                                         newCoverage, viewMatrix, isHairline, aaType, devBounds,
                                         passes[p]);
            } else {
                assert_alive(paint);
                op = DefaultPathOp::Make(context, std::move(paint), path, srcSpaceTol, newCoverage,
                                         viewMatrix, isHairline, aaType, devBounds, passes[p]);
            }
            renderTargetContext->addDrawOp(clip, std::move(op));
        }
    }
    return true;
}
Beispiel #16
0
// clipRect has not been shifted up
void sk_fill_path(const SkPath& path, const SkIRect& clipRect, SkBlitter* blitter,
                  int start_y, int stop_y, int shiftEdgesUp, bool pathContainedInClip) {
    SkASSERT(blitter);

    SkIRect shiftedClip = clipRect;
    shiftedClip.fLeft = SkLeftShift(shiftedClip.fLeft, shiftEdgesUp);
    shiftedClip.fRight = SkLeftShift(shiftedClip.fRight, shiftEdgesUp);
    shiftedClip.fTop = SkLeftShift(shiftedClip.fTop, shiftEdgesUp);
    shiftedClip.fBottom = SkLeftShift(shiftedClip.fBottom, shiftEdgesUp);

    SkEdgeBuilder builder;
    int count = builder.build_edges(path, &shiftedClip, shiftEdgesUp, pathContainedInClip);
    SkEdge** list = builder.edgeList();

    if (0 == count) {
        if (path.isInverseFillType()) {
            /*
             *  Since we are in inverse-fill, our caller has already drawn above
             *  our top (start_y) and will draw below our bottom (stop_y). Thus
             *  we need to restrict our drawing to the intersection of the clip
             *  and those two limits.
             */
            SkIRect rect = clipRect;
            if (rect.fTop < start_y) {
                rect.fTop = start_y;
            }
            if (rect.fBottom > stop_y) {
                rect.fBottom = stop_y;
            }
            if (!rect.isEmpty()) {
                blitter->blitRect(rect.fLeft << shiftEdgesUp,
                                  rect.fTop << shiftEdgesUp,
                                  rect.width() << shiftEdgesUp,
                                  rect.height() << shiftEdgesUp);
            }
        }
        return;
    }

    SkEdge headEdge, tailEdge, *last;
    // this returns the first and last edge after they're sorted into a dlink list
    SkEdge* edge = sort_edges(list, count, &last);

    headEdge.fPrev = nullptr;
    headEdge.fNext = edge;
    headEdge.fFirstY = kEDGE_HEAD_Y;
    headEdge.fX = SK_MinS32;
    edge->fPrev = &headEdge;

    tailEdge.fPrev = last;
    tailEdge.fNext = nullptr;
    tailEdge.fFirstY = kEDGE_TAIL_Y;
    last->fNext = &tailEdge;

    // now edge is the head of the sorted linklist

    start_y = SkLeftShift(start_y, shiftEdgesUp);
    stop_y = SkLeftShift(stop_y, shiftEdgesUp);
    if (!pathContainedInClip && start_y < shiftedClip.fTop) {
        start_y = shiftedClip.fTop;
    }
    if (!pathContainedInClip && stop_y > shiftedClip.fBottom) {
        stop_y = shiftedClip.fBottom;
    }

    InverseBlitter  ib;
    PrePostProc     proc = nullptr;

    if (path.isInverseFillType()) {
        ib.setBlitter(blitter, clipRect, shiftEdgesUp);
        blitter = &ib;
        proc = PrePostInverseBlitterProc;
    }

    // count >= 2 is required as the convex walker does not handle missing right edges
    if (path.isConvex() && (nullptr == proc) && count >= 2) {
        walk_simple_edges(&headEdge, blitter, start_y, stop_y);
    } else {
        walk_edges(&headEdge, path.getFillType(), blitter, start_y, stop_y, proc,
                shiftedClip.right());
    }
}
bool GrDefaultPathRenderer::internalDrawPath(const SkPath& path,
                                             const SkStrokeRec& origStroke,
                                             GrDrawTarget* target,
                                             bool stencilOnly) {

    SkMatrix viewM = target->getDrawState().getViewMatrix();
    SkTCopyOnFirstWrite<SkStrokeRec> stroke(origStroke);

    SkScalar hairlineCoverage;
    if (IsStrokeHairlineOrEquivalent(*stroke, target->getDrawState().getViewMatrix(),
                                     &hairlineCoverage)) {
        uint8_t newCoverage = SkScalarRoundToInt(hairlineCoverage *
                                                 target->getDrawState().getCoverage());
        target->drawState()->setCoverage(newCoverage);

        if (!stroke->isHairlineStyle()) {
            stroke.writable()->setHairlineStyle();
        }
    }

    SkScalar tol = SK_Scalar1;
    tol = GrPathUtils::scaleToleranceToSrc(tol, viewM, path.getBounds());

    int vertexCnt;
    int indexCnt;
    GrPrimitiveType primType;
    GrDrawTarget::AutoReleaseGeometry arg;
    if (!this->createGeom(path,
                          *stroke,
                          tol,
                          target,
                          &primType,
                          &vertexCnt,
                          &indexCnt,
                          &arg)) {
        return false;
    }

    SkASSERT(NULL != target);
    GrDrawTarget::AutoStateRestore asr(target, GrDrawTarget::kPreserve_ASRInit);
    GrDrawState* drawState = target->drawState();
    bool colorWritesWereDisabled = drawState->isColorWriteDisabled();
    // face culling doesn't make sense here
    SkASSERT(GrDrawState::kBoth_DrawFace == drawState->getDrawFace());

    int                         passCount = 0;
    const GrStencilSettings*    passes[3];
    GrDrawState::DrawFace       drawFace[3];
    bool                        reverse = false;
    bool                        lastPassIsBounds;

    if (stroke->isHairlineStyle()) {
        passCount = 1;
        if (stencilOnly) {
            passes[0] = &gDirectToStencil;
        } else {
            passes[0] = NULL;
        }
        lastPassIsBounds = false;
        drawFace[0] = GrDrawState::kBoth_DrawFace;
    } else {
        if (single_pass_path(path, *stroke)) {
            passCount = 1;
            if (stencilOnly) {
                passes[0] = &gDirectToStencil;
            } else {
                passes[0] = NULL;
            }
            drawFace[0] = GrDrawState::kBoth_DrawFace;
            lastPassIsBounds = false;
        } else {
            switch (path.getFillType()) {
                case SkPath::kInverseEvenOdd_FillType:
                    reverse = true;
                    // fallthrough
                case SkPath::kEvenOdd_FillType:
                    passes[0] = &gEOStencilPass;
                    if (stencilOnly) {
                        passCount = 1;
                        lastPassIsBounds = false;
                    } else {
                        passCount = 2;
                        lastPassIsBounds = true;
                        if (reverse) {
                            passes[1] = &gInvEOColorPass;
                        } else {
                            passes[1] = &gEOColorPass;
                        }
                    }
                    drawFace[0] = drawFace[1] = GrDrawState::kBoth_DrawFace;
                    break;

                case SkPath::kInverseWinding_FillType:
                    reverse = true;
                    // fallthrough
                case SkPath::kWinding_FillType:
                    if (fSeparateStencil) {
                        if (fStencilWrapOps) {
                            passes[0] = &gWindStencilSeparateWithWrap;
                        } else {
                            passes[0] = &gWindStencilSeparateNoWrap;
                        }
                        passCount = 2;
                        drawFace[0] = GrDrawState::kBoth_DrawFace;
                    } else {
                        if (fStencilWrapOps) {
                            passes[0] = &gWindSingleStencilWithWrapInc;
                            passes[1] = &gWindSingleStencilWithWrapDec;
                        } else {
                            passes[0] = &gWindSingleStencilNoWrapInc;
                            passes[1] = &gWindSingleStencilNoWrapDec;
                        }
                        // which is cw and which is ccw is arbitrary.
                        drawFace[0] = GrDrawState::kCW_DrawFace;
                        drawFace[1] = GrDrawState::kCCW_DrawFace;
                        passCount = 3;
                    }
                    if (stencilOnly) {
                        lastPassIsBounds = false;
                        --passCount;
                    } else {
                        lastPassIsBounds = true;
                        drawFace[passCount-1] = GrDrawState::kBoth_DrawFace;
                        if (reverse) {
                            passes[passCount-1] = &gInvWindColorPass;
                        } else {
                            passes[passCount-1] = &gWindColorPass;
                        }
                    }
                    break;
                default:
                    SkDEBUGFAIL("Unknown path fFill!");
                    return false;
            }
        }
    }

    SkRect devBounds;
    GetPathDevBounds(path, drawState->getRenderTarget(), viewM, &devBounds);

    for (int p = 0; p < passCount; ++p) {
        drawState->setDrawFace(drawFace[p]);
        if (NULL != passes[p]) {
            *drawState->stencil() = *passes[p];
        }

        if (lastPassIsBounds && (p == passCount-1)) {
            if (!colorWritesWereDisabled) {
                drawState->disableState(GrDrawState::kNoColorWrites_StateBit);
            }
            SkRect bounds;
            GrDrawState::AutoViewMatrixRestore avmr;
            if (reverse) {
                SkASSERT(NULL != drawState->getRenderTarget());
                // draw over the dev bounds (which will be the whole dst surface for inv fill).
                bounds = devBounds;
                SkMatrix vmi;
                // mapRect through persp matrix may not be correct
                if (!drawState->getViewMatrix().hasPerspective() &&
                    drawState->getViewInverse(&vmi)) {
                    vmi.mapRect(&bounds);
                } else {
                    avmr.setIdentity(drawState);
                }
            } else {
                bounds = path.getBounds();
            }
            GrDrawTarget::AutoGeometryAndStatePush agasp(target, GrDrawTarget::kPreserve_ASRInit);
            target->drawSimpleRect(bounds, NULL);
        } else {
            if (passCount > 1) {
                drawState->enableState(GrDrawState::kNoColorWrites_StateBit);
            }
            if (indexCnt) {
                target->drawIndexed(primType, 0, 0,
                                    vertexCnt, indexCnt, &devBounds);
            } else {
                target->drawNonIndexed(primType, 0, vertexCnt, &devBounds);
            }
        }
    }
    return true;
}