//
// Originally, 'endTransmission' was an f(void) function.
// It has been modified to take one parameter indicating
// whether or not a STOP should be performed on the bus.
// Calling endTransmission(false) allows a sketch to
// perform a repeated start.
//
// WARNING: Nothing in the library keeps track of whether
// the bus tenure has been properly ended with a STOP. It
// is very possible to leave the bus in a hung state if
// no call to endTransmission(true) is made. Some I2C
// devices will behave oddly if they do not see a STOP.
//
uint8_t TwoWire::endTransmission(uint8_t sendStop) {
uint8_t error = 0;
// transmit buffer (blocking)
TWI_StartWrite(twi, txAddress, 0, 0, txBuffer[0]);
if (!TWI_WaitByteSent(twi, XMIT_TIMEOUT))
error = 2; // error, got NACK on address transmit
if (error == 0) {
uint16_t sent = 1;
while (sent < txBufferLength) {
TWI_WriteByte(twi, txBuffer[sent++]);
if (!TWI_WaitByteSent(twi, XMIT_TIMEOUT))
error = 3; // error, got NACK during data transmmit
}
}
if (error == 0) {
TWI_Stop(twi);
if (!TWI_WaitTransferComplete(twi, XMIT_TIMEOUT))
error = 4; // error, finishing up
}
txBufferLength = 0; // empty buffer
status = MASTER_IDLE;
return error;
}
/**
* \brief Asynchronously sends data to a slave on the TWI bus. An optional callback
* function is invoked whenever the transfer is complete.
* \param pTwid Pointer to a Twid instance.
* \param address TWI slave address.
* \param iaddress Optional slave internal address.
* \param isize Number of internal address bytes.
* \param pData Data buffer for storing received bytes.
* \param num Data buffer to send.
* \param pAsync Asynchronous transfer descriptor.
* \return 0 if the transfer has been started; otherwise returns a TWI error code.
*/
uint8_t TWID_Write(
Twi *pTwi,
uint8_t address,
uint32_t iaddress,
uint8_t isize,
uint8_t *pData,
uint32_t num)
{
//Twi *pTwi = pTwid->pTwi;
uint32_t timeout;
assert( pTwi != NULL ) ;
assert( (address & 0x80) == 0 ) ;
assert( (iaddress & 0xFF000000) == 0 ) ;
assert( isize < 4 ) ;
/* Synchronous transfer*/
// Start write
TWI_StartWrite(pTwi, address, iaddress, isize, *pData++);
num--;
/* Send all bytes */
while (num > 0) {
/* Wait before sending the next byte */
timeout = 0;
while( !TWI_ByteSent(pTwi) && (++timeout<TWITIMEOUTMAX) );
if (timeout == TWITIMEOUTMAX) {
TRACE_ERROR("TWID Timeout BS\n\r");
}
TWI_WriteByte(pTwi, *pData++);
num--;
}
/* Wait for actual end of transfer */
timeout = 0;
/* Send a STOP condition */
TWI_SendSTOPCondition(pTwi);
while( !TWI_TransferComplete(pTwi) && (++timeout<TWITIMEOUTMAX) );
if (timeout == TWITIMEOUTMAX) {
TRACE_ERROR("TWID Timeout TC2\n\r");
}
return 0;
}
bool i2c_eeprom_master_write(Twi *twi,
const uint16_t internal_address,
const char *data,
const uint16_t length) {
uint32_t timeout;
mutex_take(mutex_twi_bricklet, MUTEX_BLOCKING);
// Start write
TWI_StartWrite(twi,
bricklet_eeprom_address,
internal_address,
I2C_EEPROM_INTERNAL_ADDRESS_BYTES,
data[0]);
for(uint16_t i = 1; i < length; i++) {
timeout = 0;
// Wait until byte is sent, otherwise return false
while(!TWI_ByteSent(twi) && (++timeout < I2C_EEPROM_TIMEOUT)) {}
if(timeout == I2C_EEPROM_TIMEOUT) {
logieew("write timeout (nothing sent)\n\r");
mutex_give(mutex_twi_bricklet);
return false;
}
TWI_WriteByte(twi, data[i]);
}
// Send STOP
TWI_SendSTOPCondition(twi);
timeout = 0;
// Wait for transfer to be complete
while(!TWI_TransferComplete(twi) && (++timeout < I2C_EEPROM_TIMEOUT)) {}
if (timeout == I2C_EEPROM_TIMEOUT) {
logieew("write timeout (transfer incomplete)\n\r");
mutex_give(mutex_twi_bricklet);
return false;
}
// Wait at least 5ms between writes (see m24128-bw.pdf)
SLEEP_MS(5);
mutex_give(mutex_twi_bricklet);
return true;
}
//
// Originally, 'endTransmission' was an f(void) function.
// It has been modified to take one parameter indicating
// whether or not a STOP should be performed on the bus.
// Calling endTransmission(false) allows a sketch to
// perform a repeated start.
//
// WARNING: Nothing in the library keeps track of whether
// the bus tenure has been properly ended with a STOP. It
// is very possible to leave the bus in a hung state if
// no call to endTransmission(true) is made. Some I2C
// devices will behave oddly if they do not see a STOP.
//
uint8_t TwoWire::endTransmission(uint8_t sendStop) {
// transmit buffer (blocking)
TWI_StartWrite(twi, txAddress, 0, 0, txBuffer[0]);
TWI_WaitByteSent(twi, XMIT_TIMEOUT);
int sent = 1;
while (sent < txBufferLength) {
twi_write_byte(twi, txBuffer[sent++]);
TWI_WaitByteSent(twi, XMIT_TIMEOUT);
}
TWI_Stop( twi);
TWI_WaitTransferComplete(twi, XMIT_TIMEOUT);
// empty buffer
txBufferLength = 0;
status = MASTER_IDLE;
return sent;
}
/**********************************************
* \brief
*
*
* \return none
*/
result_t HalExpansionPortClass::writePcaPorts(uint32_t iRegister, uint8_t *pBuffer, uint32_t bufLength) {
uint32_t bufCnt=bufLength;
uint32_t breakOut_cnt=0;
result_t retResult=SUCCESS;
TWI_StartWrite(HW_ADDR_TWI_PCA9698,HW_PCA9698_TwiAddr, iRegister,HW_PCA9698_InternalAddrLen,*pBuffer);
pBuffer++;
bufCnt--;
while(bufCnt >0) {
//if no NACK and Byte sent, then transmit next one
if (TWI_SR_NACK & TWI_GetStatus(HW_ADDR_TWI_PCA9698)) {
dbgOut1(eDbgAll_errEvt,'B',"HalTwiPca Unexpected NACK ",bufCnt);
retResult=FAIL;
break;
}
if (!TWI_ByteSent(HW_ADDR_TWI_PCA9698)) {
if (90000 < ++breakOut_cnt) {
dbgOut1(eDbgAll_errEvt,'B',"HalTwiPca TWI_SR_TXRDY exceeded ",bufCnt);
retResult=FAIL;
break; //Out while
}
continue;
}
breakOut_cnt = 0;
TWI_WriteByte(HW_ADDR_TWI_PCA9698,*pBuffer);
pBuffer++;
bufCnt--;
}
TWI_Stop(HW_ADDR_TWI_PCA9698);
while (!TWI_TransferComplete(HW_ADDR_TWI_PCA9698)) {
if (90000 < ++breakOut_cnt) {
dbgOut(eDbgAll_errEvt,'B',"HalTwiPca TWI_SR_TXCOMP exceeded ");
break; //Out while
}
}
return retResult;
}//portInit
unsigned char WriteAccelData(unsigned int iaddress, char *bytes, unsigned int num)
{
unsigned int timeout;
// wait for TWI bus to be ready
while(!(TWI_TransferComplete(AT91C_BASE_TWI))) nop();
// Start Writing
TWI_StartWrite(AT91C_BASE_TWI,ACCELADDR,iaddress,1,*bytes++);
num--;
while(num > 0){
// Wait before sending the next byte
timeout = 0;
while(!TWI_ByteSent(AT91C_BASE_TWI) && (++timeout<TWITIMEOUTMAX)) nop();
if(timeout == TWITIMEOUTMAX) return 1;
TWI_WriteByte(AT91C_BASE_TWI, *bytes++);
num--;
}
return 0;
}
/**
* \brief Asynchronously sends data to a slave on the TWI bus. An optional callback
* function is invoked whenever the transfer is complete.
* \param pTwid Pointer to a Twid instance.
* \param address TWI slave address.
* \param iaddress Optional slave internal address.
* \param isize Number of internal address bytes.
* \param pData Data buffer for storing received bytes.
* \param num Data buffer to send.
* \param pAsync Asynchronous transfer descriptor.
* \return 0 if the transfer has been started; otherwise returns a TWI error code.
*/
uint8_t TWID_Write(
Twid *pTwid,
uint8_t address,
uint32_t iaddress,
uint8_t isize,
uint8_t *pData,
uint32_t num,
Async *pAsync)
{
Twi *pTwi = pTwid->pTwi;
AsyncTwi *pTransfer = (AsyncTwi *) pTwid->pTransfer;
uint32_t timeout;
assert( pTwi != NULL ) ;
assert( (address & 0x80) == 0 ) ;
assert( (iaddress & 0xFF000000) == 0 ) ;
assert( isize < 4 ) ;
/* Check that no transfer is already pending */
if (pTransfer) {
TRACE_ERROR("TWI_Write: A transfer is already pending\n\r");
return TWID_ERROR_BUSY;
}
/* Asynchronous transfer */
if (pAsync) {
/* Update the transfer descriptor */
pTwid->pTransfer = pAsync;
pTransfer = (AsyncTwi *) pAsync;
pTransfer->status = ASYNC_STATUS_PENDING;
pTransfer->pData = pData;
pTransfer->num = num;
pTransfer->transferred = 1;
/* Enable write interrupt and start the transfer */
TWI_StartWrite(pTwi, address, iaddress, isize, *pData);
TWI_EnableIt(pTwi, TWI_IER_TXRDY);
}
/* Synchronous transfer*/
else {
// Start write
TWI_StartWrite(pTwi, address, iaddress, isize, *pData++);
num--;
/* Send all bytes */
while (num > 0) {
/* Wait before sending the next byte */
timeout = 0;
while( !TWI_ByteSent(pTwi) && (++timeout<TWITIMEOUTMAX) );
if (timeout == TWITIMEOUTMAX) {
TRACE_ERROR("TWID Timeout BS\n\r");
}
TWI_WriteByte(pTwi, *pData++);
num--;
}
/* Wait for actual end of transfer */
timeout = 0;
/* Send a STOP condition */
TWI_SendSTOPCondition(pTwi);
while( !TWI_TransferComplete(pTwi) && (++timeout<TWITIMEOUTMAX) );
if (timeout == TWITIMEOUTMAX) {
TRACE_ERROR("TWID Timeout TC2\n\r");
}
}
return 0;
}
//------------------------------------------------------------------------------
/// Asynchronously sends data to a slave on the TWI bus. An optional callback
/// function is invoked whenever the transfer is complete.
/// \param pTwid Pointer to a Twid instance.
/// \param address Slave address.
/// \param iaddress Optional slave internal address.
/// \param isize Number of internal address bytes.
/// \param pData Data buffer to send.
/// \param num Number of bytes to send.
/// \param pAsync Pointer to an Asynchronous transfer descriptor.
//------------------------------------------------------------------------------
unsigned char TWID_Write(
Twid *pTwid,
unsigned char address,
unsigned int iaddress,
unsigned char isize,
unsigned char *pData,
unsigned int num,
Async *pAsync)
{
AT91S_TWI *pTwi = pTwid->pTwi;
AsyncTwi *pTransfer = (AsyncTwi *) pTwid->pTransfer;
unsigned int timeout;
//TRACE_DEBUG("TWID_Write()\n\r");
//TRACE_DEBUG("0x%X\n\r", pData[0]);
SANITY_CHECK(pTwi);
SANITY_CHECK((address & 0x80) == 0);
SANITY_CHECK((iaddress & 0xFF000000) == 0);
SANITY_CHECK(isize < 4);
// Check that no transfer is already pending
if (pTransfer) {
TRACE_ERROR("TWI_Write: A transfer is already pending\n\r");
return TWID_ERROR_BUSY;
}
// Asynchronous transfer
if (pAsync) {
// Update the transfer descriptor
pTwid->pTransfer = pAsync;
pTransfer = (AsyncTwi *) pAsync;
pTransfer->status = ASYNC_STATUS_PENDING;
pTransfer->pData = pData;
pTransfer->num = num;
pTransfer->transferred = 1;
// Enable write interrupt and start the transfer
TWI_StartWrite(pTwi, address, iaddress, isize, *pData);
TWI_EnableIt(pTwi, AT91C_TWI_TXRDY);
}
// Synchronous transfer
else {
// Start write
TWI_StartWrite(pTwi, address, iaddress, isize, *pData++);
num--;
// Send all bytes
while (num > 0) {
// Wait before sending the next byte
timeout = 0;
while( !TWI_ByteSent(pTwi) && (++timeout<TWITIMEOUTMAX) );
if (timeout == TWITIMEOUTMAX) {
TRACE_ERROR("TWID Timeout BS\n\r");
return TWID_ERROR_TIMEOUT;
}
TWI_WriteByte(pTwi, *pData++);
num--;
}
// Wait for actual end of transfer
timeout = 0;
#ifdef TWI_V3XX
// Send a STOP condition
TWI_SendSTOPCondition(pTwi);
#endif
while( !TWI_TransferComplete(pTwi) && (++timeout<TWITIMEOUTMAX) );
if (timeout == TWITIMEOUTMAX) {
TRACE_ERROR("TWID Timeout TC2\n\r");
return TWID_ERROR_TIMEOUT;
}
}
return 0;
}
