static void __init omap_tablet_init(void)
{
int package = OMAP_PACKAGE_CBS;
int tablet_rev = 0;
if (omap_rev() == OMAP4430_REV_ES1_0)
package = OMAP_PACKAGE_CBL;
omap4_mux_init(board_mux, NULL, package);
acclaim_mem_init();
omap_board_config = tablet_config;
omap_board_config_size = ARRAY_SIZE(tablet_config);
tablet_rev = omap_init_board_version(0);
omap4_create_board_props();
omap4_i2c_init();
#ifdef CONFIG_CHARGER_MAX8903
max8903_init_charger();
#endif //CONFIG_CHARGER_MAX8903
acclaim_touch_init();
omap_dmm_init();
acclaim_panel_init();
tablet_pmic_mux_init();
acclaim_button_init();
omap4_register_ion();
board_serial_init();
omap4_tablet_wifi_init();
omap4_twl6030_hsmmc_init(mmc);
omap4_ehci_ohci_init();
usb_musb_init(&musb_board_data);
omap_enable_smartreflex_on_init();
if (enable_suspend_off)
omap_pm_enable_off_mode();
}
static void __init omap_4430sdp_init(void)
{
int status;
int package = OMAP_PACKAGE_CBS;
if (omap_rev() == OMAP4430_REV_ES1_0)
package = OMAP_PACKAGE_CBL;
omap4_mux_init(board_mux, package);
omap4_i2c_init();
omap_sfh7741prox_init();
platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
omap_serial_init();
omap4_twl6030_hsmmc_init(mmc);
/* OMAP4 SDP uses internal transceiver so register nop transceiver */
usb_nop_xceiv_register(0);
/* FIXME: allow multi-omap to boot until musb is updated for omap4 */
if (!cpu_is_omap44xx())
usb_musb_init(&musb_board_data);
status = omap_ethernet_init();
if (status) {
pr_err("Ethernet initialization failed: %d\n", status);
} else {
sdp4430_spi_board_info[0].irq = gpio_to_irq(ETH_KS8851_IRQ);
spi_register_board_info(sdp4430_spi_board_info,
ARRAY_SIZE(sdp4430_spi_board_info));
}
}
static void __init omap4_panda_init(void)
{
int package = OMAP_PACKAGE_CBS;
int ret;
if (omap_rev() == OMAP4430_REV_ES1_0)
package = OMAP_PACKAGE_CBL;
omap4_mux_init(board_mux, NULL, package);
omap_panda_wlan_data.irq = gpio_to_irq(GPIO_WIFI_IRQ);
ret = wl12xx_set_platform_data(&omap_panda_wlan_data);
if (ret)
pr_err("error setting wl12xx data: %d\n", ret);
omap4_panda_init_rev();
omap4_panda_i2c_init();
platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
platform_device_register(&omap_vwlan_device);
omap_serial_init();
omap_sdrc_init(NULL, NULL);
omap4_twl6030_hsmmc_init(mmc);
omap4_ehci_init();
usb_musb_init(&musb_board_data);
omap4_panda_display_init();
}
static void __init omap_4430sdp_init(void)
{
int status;
int package = OMAP_PACKAGE_CBS;
if (omap_rev() == OMAP4430_REV_ES1_0)
package = OMAP_PACKAGE_CBL;
omap4_mux_init(board_mux, NULL, package);
omap4_i2c_init();
omap_sfh7741prox_init();
platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
omap_serial_init();
omap_sdrc_init(NULL, NULL);
omap4_sdp4430_wifi_init();
omap4_twl6030_hsmmc_init(mmc);
usb_musb_init(&musb_board_data);
status = omap_ethernet_init();
if (status) {
pr_err("Ethernet initialization failed: %d\n", status);
} else {
sdp4430_spi_board_info[0].irq = gpio_to_irq(ETH_KS8851_IRQ);
spi_register_board_info(sdp4430_spi_board_info,
ARRAY_SIZE(sdp4430_spi_board_info));
}
status = omap4_keyboard_init(&sdp4430_keypad_data, &keypad_data);
if (status)
pr_err("Keypad initialization failed: %d\n", status);
omap_4430sdp_display_init();
}
static void __init omap4_panda_init(void)
{
int package = OMAP_PACKAGE_CBS;
omap_emif_setup_device_details(&emif_devices, &emif_devices);
if (omap_rev() == OMAP4430_REV_ES1_0)
package = OMAP_PACKAGE_CBL;
omap4_mux_init(board_mux, NULL, package);
if (wl12xx_set_platform_data(&omap_panda_wlan_data))
pr_err("error setting wl12xx data\n");
omap4_panda_i2c_init();
omap4_audio_conf();
platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
/*
* This is temporaray. With WLAN regsitering, we see that UART2 is not
* idling on panda and CORE RET is not happening. So removing this FTM.
* Later will be enabled.
*
* platform_device_register(&omap_vwlan_device);
*/
board_serial_init();
omap4_twl6030_hsmmc_init(mmc);
omap4_ehci_init();
usb_musb_init(&musb_board_data);
omap_dmm_init();
omap4_panda_display_init();
}
static void __init omap_tablet_init(void)
{
int status;
int package = OMAP_PACKAGE_CBS;
int tablet_rev = 0;
if (omap_rev() == OMAP4430_REV_ES1_0)
package = OMAP_PACKAGE_CBL;
omap4_mux_init(board_mux, NULL, package);
omap_emif_setup_device_details(&emif_devices, &emif_devices);
omap_board_config = tablet_config;
omap_board_config_size = ARRAY_SIZE(tablet_config);
tablet_rev = omap_init_board_version(0);
omap4_create_board_props();
omap4_audio_conf();
omap4_i2c_init();
tablet_touch_init();
tablet_camera_mux_init();
omap_dmm_init();
tablet_panel_init();
tablet_pmic_mux_init();
tablet_set_osc_timings();
tablet_button_init();
omap4_register_ion();
board_serial_init();
omap4_tablet_wifi_init();
omap4_twl6030_hsmmc_init(mmc);
tablet_sensor_init();
platform_add_devices(tablet4430_devices,
ARRAY_SIZE(tablet4430_devices));
wake_lock_init(&st_wk_lock, WAKE_LOCK_SUSPEND, "st_wake_lock");
omap4_ehci_ohci_init();
usb_musb_init(&musb_board_data);
status = omap_ethernet_init();
if (status) {
pr_err("Ethernet initialization failed: %d\n", status);
} else {
tablet_spi_board_info[0].irq = gpio_to_irq(ETH_KS8851_IRQ);
spi_register_board_info(tablet_spi_board_info,
ARRAY_SIZE(tablet_spi_board_info));
}
if (cpu_is_omap446x()) {
/* Vsel0 = gpio, vsel1 = gnd */
status = omap_tps6236x_board_setup(true, TPS62361_GPIO, -1,
OMAP_PIN_OFF_OUTPUT_HIGH, -1);
if (status)
pr_err("TPS62361 initialization failed: %d\n", status);
}
omap_enable_smartreflex_on_init();
if (enable_suspend_off)
omap_pm_enable_off_mode();
}
static void __init omap4_panda_init(void)
{
int package = OMAP_PACKAGE_CBS;
int ret;
if (omap_rev() == OMAP4430_REV_ES1_0)
package = OMAP_PACKAGE_CBL;
omap_emif_set_device_details(1, &lpddr2_elpida_2G_S4_x2_info,
lpddr2_elpida_2G_S4_timings,
ARRAY_SIZE(lpddr2_elpida_2G_S4_timings),
&lpddr2_elpida_S4_min_tck,
&custom_configs);
omap_emif_set_device_details(2, &lpddr2_elpida_2G_S4_x2_info,
lpddr2_elpida_2G_S4_timings,
ARRAY_SIZE(lpddr2_elpida_2G_S4_timings),
&lpddr2_elpida_S4_min_tck,
&custom_configs);
if (cpu_is_omap446x())
gpio_leds[0].gpio = 110;
omap4_mux_init(board_mux, NULL, package);
omap_panda_wlan_data.irq = gpio_to_irq(GPIO_WIFI_IRQ);
omap_register_mac_device_fixup_paths(panda_fixup_mac_device_paths,
ARRAY_SIZE(panda_fixup_mac_device_paths));
ret = wl12xx_set_platform_data(&omap_panda_wlan_data);
if (ret)
pr_err("error setting wl12xx data: %d\n", ret);
omap4_panda_init_rev();
omap4_panda_i2c_init();
platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
platform_device_register(&omap_vwlan_device);
omap_serial_init();
omap_sdrc_init(NULL, NULL);
omap4_twl6030_hsmmc_init(mmc);
omap4_ehci_init();
usb_musb_init(&musb_board_data);
omap4_panda_display_init();
#ifdef CONFIG_MACH_OMAP4_PANDA_CAMERA_SUPPORT
panda_camera_init(&panda_camera_board_info);
#endif
if (cpu_is_omap446x()) {
/* Vsel0 = gpio, vsel1 = gnd */
ret = omap_tps6236x_board_setup(true, TPS62361_GPIO, -1,
OMAP_PIN_OFF_OUTPUT_HIGH, -1);
if (ret)
pr_err("TPS62361 initialization failed: %d\n", ret);
}
omap_enable_smartreflex_on_init();
}
static void __init pcm049_init(void)
{
pm_power_off = pcm049_power_off;
omap4_mux_init(board_mux, NULL, OMAP_PACKAGE_CBS);
pcm049_init_smsc911x();
pcm049_i2c_init();
platform_add_devices(pcm049_devices, ARRAY_SIZE(pcm049_devices));
board_serial_init();
omap_sdrc_init(NULL, NULL);
omap4_twl6030_hsmmc_init(mmc);
omap4_ehci_init();
usb_musb_init(&musb_board_data);
pcm049_display_init();
}
static void __init omap4_panda_init(void)
{
int package = OMAP_PACKAGE_CBS;
if (omap_rev() == OMAP4430_REV_ES1_0)
package = OMAP_PACKAGE_CBL;
omap4_mux_init(board_mux, package);
omap4_panda_i2c_init();
platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
omap_serial_init();
omap4_twl6030_hsmmc_init(mmc);
omap4_ehci_init();
usb_musb_init(&musb_board_data);
}
void __init omap_ovation_init(void)
{
int package = OMAP_PACKAGE_CBS;
if (omap_rev() == OMAP4430_REV_ES1_0)
package = OMAP_PACKAGE_CBL;
omap4_mux_init(board_mux, NULL, package);
/* Turn off the external FET for twl6032 charger */
gpio_request ( EXT_FET_EN , "EXT-FET-EN" );
gpio_direction_output ( EXT_FET_EN , 0 );
/* EVT1a bringup only */
if (system_rev == OVATION_EVT1A) {
/* The GPIO for Charging level - 1=2A, 0=1A */
gpio_request(44, "ic_chg_level");
gpio_direction_output(44, 1);
}
ovation_mem_init();
omap_board_config = ovation_config;
omap_board_config_size = ARRAY_SIZE(ovation_config);
omap4_create_board_props();
omap4_audio_conf();
omap4_i2c_init();
ovation_lcd_touch_init();
ovation_touch_init();
omap_dmm_init();
ovation_panel_init();
ovation_pmic_mux_init();
ovation_button_init();
kxtj9_dev_init();
omap4_register_ion();
board_serial_init();
bn_wilink_init();
omap4_twl6030_hsmmc_init(mmc);
usb_musb_init(&musb_board_data);
omap_enable_smartreflex_on_init();
if (enable_suspend_off)
omap_pm_enable_off_mode();
/* Enable GG bat_low irq to wake up device to inform framework to shutdown. */
omap_mux_init_gpio(BQ27500_BAT_LOW_GPIO, OMAP_PIN_INPUT | OMAP_PIN_OFF_WAKEUPENABLE);
}
static void __init omap_4430sdp_init(void)
{
int status;
int package = OMAP_PACKAGE_CBS;
if (omap_rev() == OMAP4430_REV_ES1_0)
package = OMAP_PACKAGE_CBL;
omap4_mux_init(board_mux, NULL, package);
omap_emif_setup_device_details(&emif_devices, &emif_devices);
omap_board_config = sdp4430_config;
omap_board_config_size = ARRAY_SIZE(sdp4430_config);
omap4_i2c_init();
omap_sfh7741prox_init();
platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
board_serial_init();
omap4_twl6030_hsmmc_init(mmc);
usb_musb_init(&musb_board_data);
status = omap_ethernet_init();
if (status) {
pr_err("Ethernet initialization failed: %d\n", status);
} else {
sdp4430_spi_board_info[0].irq = gpio_to_irq(ETH_KS8851_IRQ);
spi_register_board_info(sdp4430_spi_board_info,
ARRAY_SIZE(sdp4430_spi_board_info));
}
status = omap4_keyboard_init(&sdp4430_keypad_data);
if (status)
pr_err("Keypad initialization failed: %d\n", status);
omap_dmm_init();
omap_4430sdp_display_init();
if (cpu_is_omap446x()) {
/* Vsel0 = gpio, vsel1 = gnd */
status = omap_tps6236x_board_setup(true, TPS62361_GPIO, -1,
OMAP_PIN_OFF_OUTPUT_HIGH, -1);
if (status)
pr_err("TPS62361 initialization failed: %d\n", status);
}
}
static void __init omap4_panda_init(void)
{
int package = OMAP_PACKAGE_CBS;
if (omap_rev() == OMAP4430_REV_ES1_0)
package = OMAP_PACKAGE_CBL;
omap4_mux_init(board_mux, NULL, package);
if (wl12xx_set_platform_data(&omap_panda_wlan_data))
pr_err("error setting wl12xx data\n");
omap4_panda_i2c_init();
platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
platform_device_register(&omap_vwlan_device);
board_serial_init();
omap4_twl6030_hsmmc_init(mmc);
omap4_ehci_init();
usb_musb_init(&musb_board_data);
omap4_panda_display_init();
}
static void __init omap_4430sdp_init(void)
{
int status;
omap4_i2c_init();
platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
omap_serial_init();
omap4_twl6030_hsmmc_init(mmc);
/* FIXME: allow multi-omap to boot until musb is updated for omap4 */
if (!cpu_is_omap44xx())
usb_musb_init(&musb_board_data);
status = omap_ethernet_init();
if (status) {
pr_err("Ethernet initialization failed: %d\n", status);
} else {
sdp4430_spi_board_info[0].irq = gpio_to_irq(ETH_KS8851_IRQ);
spi_register_board_info(sdp4430_spi_board_info,
ARRAY_SIZE(sdp4430_spi_board_info));
}
}
static void __init omap_4430sdp_init(void)
{
int status;
omap4_i2c_init();
platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
omap_serial_init();
omap4_twl6030_hsmmc_init(mmc);
/* OMAP4 SDP uses internal transceiver so register nop transceiver */
usb_nop_xceiv_register();
if (!cpu_is_omap44xx())
usb_musb_init(&musb_board_data);
status = omap_ethernet_init();
if (status) {
pr_err("Ethernet initialization failed: %d\n", status);
} else {
sdp4430_spi_board_info[0].irq = gpio_to_irq(ETH_KS8851_IRQ);
spi_register_board_info(sdp4430_spi_board_info,
ARRAY_SIZE(sdp4430_spi_board_info));
}
}
static void __init omap_4430sdp_init(void)
{
int package = OMAP_PACKAGE_CBS;
if (omap_rev() == OMAP4430_REV_ES1_0)
package = OMAP_PACKAGE_CBL;
omap4_mux_init(board_mux, NULL, package);
lpddr_init();
omap_board_config = sdp4430_config;
omap_board_config_size = ARRAY_SIZE(sdp4430_config);
omap_init_board_version(0);
omap4_create_board_props();
blaze_pmic_mux_init();
omap4_i2c_init();
/* JossCheng, 20111221, Porting gyro sensor and e-compass {*/
#ifdef CONFIG_MPU_SENSORS_MPU6050B1
mpu6050b1_init();
#endif
/* JossCheng, 20111221, Porting gyro sensor and e-compass }*/
//blaze_sensor_init();
// Anvoi, 2011/12/14, Porting Light sensor driver to ICS
omap4_als_init();
// Anvoi, 2011/12/14, Porting Light sensor driver to ICS
//blaze_touch_init();
omap4_register_ion();
/*SW5, Anvoi, 20111215, Config key VolumeUp/VolumeDown{*/
platform_add_devices(bowser_devices, ARRAY_SIZE(bowser_devices));
/*SW5, Anvoi, 20111215, Config key VolumeUp/VolumeDown}*/
#if defined (CONFIG_TATE_HALL_SENSORS)
hall_init();
#endif
board_serial_init();
omap4_twl6030_hsmmc_init(mmc);
bowser_wifi_init();
omap4_sdp4430_bt_init();
omap4_ehci_ohci_init();
usb_musb_init(&musb_board_data);
// BokeeLi, 2011/12/14, Porting proximity driver
#ifdef CONFIG_INPUT_PIC12LF1822_PROXIMITY
omap4_proximity_init();
#endif
// BokeeLi, 2011/12/14, Porting proximity driver
/*SW5, Jamestsai, 1213, enable cypress{*/
#if defined(CONFIG_TOUCHSCREEN_CYPRESS_TTSP) || (CONFIG_TOUCHSCREEN_ATMEL_MXT) || defined(CONFIG_TOUCHSCREEN_ATMEL_MXT_MODULE)
omap4_touch_init();
#endif
/*}SW5, Jamestsai, 1213, enable cypress*/
omap_dmm_init();
//omap_4430sdp_display_init();
bowser_panel_init();
omap_enable_smartreflex_on_init();
if (enable_suspend_off)
omap_pm_enable_off_mode();
}
static void __init board_init(void)
{
int package = OMAP_PACKAGE_CBS;
int status;
omap_board_config = board_config;
omap_board_config_size = ARRAY_SIZE(board_config);
board_set_osc_timings();
if (omap_rev() == OMAP4430_REV_ES1_0)
package = OMAP_PACKAGE_CBL;
omap4_mux_init(board_mux, NULL, package);
archos_memory_init();
omap4_i2c_init();
board_buttons_init();
board_xceiv_init();
archos_usb_musb_init(&archos_vbus_info);
archos_audio_twl6040_init(&twl6040_codec);
archos_accel_mma8453q_init(&board_mma8453q_pdata);
archos_compass_init(&board_akm8975_pdata);
archos_battery_twl4030_bci_init(&board_bci_data);
omap4_leds_init();
platform_add_devices(a101s_devices, ARRAY_SIZE(a101s_devices));
board_touch_init();
wake_lock_init(&st_wk_lock, WAKE_LOCK_SUSPEND, "st_wake_lock");
board_serial_init();
board_wifi_init();
usb_musb_init(&musb_board_data);
omap4_twl6030_hsmmc_init(mmc);
archos_omap4_ehci_init();
archos_camera_mt9m114_init();
omap_dmm_init();
omap_board_display_init();
archos_hsusb_ext_regulator_init();
enable_board_wakeup_source();
hardware_comp.tps62361 = 1;
/* Vsel0 = gpio, vsel1 = gnd */
status = omap_tps6236x_board_setup(true, TPS62361_GPIO, -1,
OMAP_PIN_OFF_OUTPUT_HIGH, -1);
if (status)
pr_err("TPS62361 initialization failed: %d\n", status);
omap_enable_smartreflex_on_init();
if (omap_rev() >= OMAP4430_REV_ES2_3)
if (enable_suspend_off)
omap_pm_enable_off_mode();
}
void __init acclaim_peripherals_init(void)
{
int status;
int package = OMAP_PACKAGE_CBS;
ulong sdram_size = get_sdram_size();
ramconsole_init();
if (omap_rev() == OMAP4430_REV_ES1_0)
package = OMAP_PACKAGE_CBL;
omap4_mux_init(board_mux, package);
acclaim_board_init();
if (sdram_vendor() == SAMSUNG_SDRAM) {
if (sdram_size == SZ_512M) {
omap_emif_setup_device_details(&emif_devices_512_samsung, &emif_devices_512_samsung);
} else if (sdram_size == SZ_1G) {
omap_emif_setup_device_details(&emif_devices_samsung, &emif_devices_samsung);
} else {
pr_err("sdram memory size does not exist, default to using 1024MB \n");
omap_emif_setup_device_details(&emif_devices_samsung, &emif_devices_samsung);
}
printk(KERN_INFO"Samsung DDR Memory \n");
} else if (sdram_vendor() == ELPIDA_SDRAM) {
if (sdram_size == SZ_512M) {
omap_emif_setup_device_details(&emif_devices_512_elpida, &emif_devices_512_elpida);
} else if (sdram_size == SZ_1G) {
omap_emif_setup_device_details(&emif_devices_elpida, &emif_devices_elpida);
} else {
pr_err("sdram memory size does not exist, default to using 1024MB \n");
omap_emif_setup_device_details(&emif_devices_elpida, &emif_devices_elpida);
}
printk(KERN_INFO"Elpida DDR Memory \n");
} else if (sdram_vendor() == HYNIX_SDRAM) {
/* Re-use ELPIDA timings as they are absolutely the same */
if (sdram_size == SZ_512M) {
omap_emif_setup_device_details(&emif_devices_512_elpida, &emif_devices_512_elpida);
} else if (sdram_size == SZ_1G) {
omap_emif_setup_device_details(&emif_devices_elpida, &emif_devices_elpida);
} else {
pr_err("sdram memory size does not exist, default to using 1024MB \n");
omap_emif_setup_device_details(&emif_devices_elpida, &emif_devices_elpida);
}
printk(KERN_INFO"Hynix DDR Memory \n");
} else
pr_err("Memory type does not exist\n");
omap_init_emif_timings();
enable_rtc_gpio();
omap4_i2c_init();
platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
acclaim_init_charger();
wake_lock_init(&uart_lock, WAKE_LOCK_SUSPEND, "uart_wake_lock");
omap_serial_init(omap_serial_platform_data);
omap4_twl6030_hsmmc_init(mmc);
#ifdef CONFIG_TIWLAN_SDIO
config_wlan_mux();
#else
//omap4_4430sdp_wifi_init();
#endif
kxtf9_dev_init();
#ifdef CONFIG_BATTERY_MAX17042
max17042_dev_init();
#endif
usb_uhhtll_init(&usbhs_pdata);
usb_musb_init(&musb_board_data);
status = omap4_keypad_initialization(&sdp4430_keypad_data);
if (status)
pr_err("Keypad initialization failed: %d\n", status);
spi_register_board_info(sdp4430_spi_board_info,
ARRAY_SIZE(sdp4430_spi_board_info));
acclaim_panel_init();
enable_board_wakeup_source();
omap_voltage_register_pmic(&omap_pmic_core, "core");
omap_voltage_register_pmic(&omap_pmic_mpu, "mpu");
omap_voltage_register_pmic(&omap_pmic_iva, "iva");
omap_voltage_init_vc(&vc_config);
}
static void __init omap_4430sdp_init(void)
{
int status;
int package = OMAP_PACKAGE_CBS;
if (omap_rev() == OMAP4430_REV_ES1_0)
package = OMAP_PACKAGE_CBL;
/* Modification for ELPIDA LPDDR2-s4 8Gb memory device */
omap_emif_set_device_details(1, &lpddr2_elpida_8G_S4_x2_info,
lpddr2_elpida_8G_S4_timings,
ARRAY_SIZE(lpddr2_elpida_8G_S4_timings),
&lpddr2_elpida_S4_min_tck,
&custom_configs);
omap_emif_set_device_details(2, &lpddr2_elpida_8G_S4_x2_info,
lpddr2_elpida_8G_S4_timings,
ARRAY_SIZE(lpddr2_elpida_8G_S4_timings),
&lpddr2_elpida_S4_min_tck,
&custom_configs);
omap4_mux_init(board_mux, NULL, package);
omap_board_config = sdp4430_config;
omap_board_config_size = ARRAY_SIZE(sdp4430_config);
omap4_i2c_init();
omap4_twl6030_hsmmc_init(mmc);
omap_sfh7741prox_init();
platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
omap_serial_init();
omap_sdrc_init(NULL, NULL);
omap4_sdp4430_wifi_init();
usb_musb_init(&musb_board_data);
status = omap_ethernet_init();
if (status) {
pr_err("Ethernet initialization failed: %d\n", status);
} else {
sdp4430_spi_board_info[0].irq = gpio_to_irq(ETH_KS8851_IRQ);
spi_register_board_info(sdp4430_spi_board_info,
ARRAY_SIZE(sdp4430_spi_board_info));
}
status = omap4_keyboard_init(&sdp4430_keypad_data, &keypad_data);
if (status)
pr_err("Keypad initialization failed: %d\n", status);
omap_4430sdp_display_init();
if (cpu_is_omap446x()) {
/* Vsel0 = gpio, vsel1 = gnd */
status = omap_tps6236x_board_setup(true, TPS62361_GPIO, -1,
OMAP_PIN_OFF_OUTPUT_HIGH, -1);
if (status)
pr_err("TPS62361 initialization failed: %d\n", status);
}
omap_enable_smartreflex_on_init();
omap_rprm_regulator_init(sdp4430_rprm_regulators,
ARRAY_SIZE(sdp4430_rprm_regulators));
enable_board_wakeups();
}
static void __init omap_4430sdp_init(void)
{
int status;
int package = OMAP_PACKAGE_CBS;
if (omap_rev() == OMAP4430_REV_ES1_0)
package = OMAP_PACKAGE_CBL;
omap4_mux_init(board_mux, NULL, package);
if (cpu_is_omap447x())
omap_emif_setup_device_details(&emif_devices_4470,
&emif_devices_4470);
else
omap_emif_setup_device_details(&emif_devices, &emif_devices);
omap_board_config = sdp4430_config;
omap_board_config_size = ARRAY_SIZE(sdp4430_config);
omap_init_board_version(0);
omap4_audio_conf();
omap4_create_board_props();
blaze_pmic_mux_init();
blaze_set_osc_timings();
omap4_i2c_init();
blaze_sensor_init();
blaze_touch_init();
omap4_register_ion();
platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
wake_lock_init(&st_wk_lock, WAKE_LOCK_SUSPEND, "st_wake_lock");
board_serial_init();
omap4_sdp4430_wifi_init();
omap4_twl6030_hsmmc_init(mmc);
/* blaze_modem_init shall be called before omap4_ehci_ohci_init */
if (!strcmp(modem_ipc, "hsi"))
blaze_modem_init(true);
else
blaze_modem_init(false);
omap4_ehci_ohci_init();
usb_musb_init(&musb_board_data);
status = omap_ethernet_init();
if (status) {
pr_err("Ethernet initialization failed: %d\n", status);
} else {
sdp4430_spi_board_info[0].irq = gpio_to_irq(ETH_KS8851_IRQ);
spi_register_board_info(sdp4430_spi_board_info,
ARRAY_SIZE(sdp4430_spi_board_info));
}
status = omap4_keyboard_init(&sdp4430_keypad_data);
if (status)
pr_err("Keypad initialization failed: %d\n", status);
omap_dmm_init();
omap_4430sdp_display_init();
blaze_panel_init();
blaze_keypad_init();
init_duty_governor();
if (cpu_is_omap446x()) {
/* Vsel0 = gpio, vsel1 = gnd */
status = omap_tps6236x_board_setup(true, TPS62361_GPIO, -1,
OMAP_PIN_OFF_OUTPUT_HIGH, -1);
if (status)
pr_err("TPS62361 initialization failed: %d\n", status);
}
omap_enable_smartreflex_on_init();
if (enable_suspend_off)
omap_pm_enable_off_mode();
}