Пример #1
0
static void __init omap_tablet_init(void)
{
	int package = OMAP_PACKAGE_CBS;
	int tablet_rev = 0;

	if (omap_rev() == OMAP4430_REV_ES1_0)
		package = OMAP_PACKAGE_CBL;
	omap4_mux_init(board_mux, NULL, package);
	acclaim_mem_init();
	omap_board_config = tablet_config;
	omap_board_config_size = ARRAY_SIZE(tablet_config);
	tablet_rev = omap_init_board_version(0);
	omap4_create_board_props();
	omap4_i2c_init();
#ifdef CONFIG_CHARGER_MAX8903
	max8903_init_charger();
#endif //CONFIG_CHARGER_MAX8903
	acclaim_touch_init();
	omap_dmm_init();
	acclaim_panel_init();
	tablet_pmic_mux_init();
	acclaim_button_init();
	omap4_register_ion();
	board_serial_init();
	omap4_tablet_wifi_init();
	omap4_twl6030_hsmmc_init(mmc);

	omap4_ehci_ohci_init();
	usb_musb_init(&musb_board_data);

	omap_enable_smartreflex_on_init();
        if (enable_suspend_off)
                omap_pm_enable_off_mode();

}
Пример #2
0
static void __init omap_4430sdp_init(void)
{
	int status;
	int package = OMAP_PACKAGE_CBS;

	if (omap_rev() == OMAP4430_REV_ES1_0)
		package = OMAP_PACKAGE_CBL;
	omap4_mux_init(board_mux, package);

	omap4_i2c_init();
	omap_sfh7741prox_init();
	platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
	omap_serial_init();
	omap4_twl6030_hsmmc_init(mmc);
	/* OMAP4 SDP uses internal transceiver so register nop transceiver */
	usb_nop_xceiv_register(0);
	/* FIXME: allow multi-omap to boot until musb is updated for omap4 */
	if (!cpu_is_omap44xx())
		usb_musb_init(&musb_board_data);

	status = omap_ethernet_init();
	if (status) {
		pr_err("Ethernet initialization failed: %d\n", status);
	} else {
		sdp4430_spi_board_info[0].irq = gpio_to_irq(ETH_KS8851_IRQ);
		spi_register_board_info(sdp4430_spi_board_info,
				ARRAY_SIZE(sdp4430_spi_board_info));
	}
}
Пример #3
0
static void __init omap4_panda_init(void)
{
	int package = OMAP_PACKAGE_CBS;
	int ret;

	if (omap_rev() == OMAP4430_REV_ES1_0)
		package = OMAP_PACKAGE_CBL;
	omap4_mux_init(board_mux, NULL, package);

	omap_panda_wlan_data.irq = gpio_to_irq(GPIO_WIFI_IRQ);
	ret = wl12xx_set_platform_data(&omap_panda_wlan_data);
	if (ret)
		pr_err("error setting wl12xx data: %d\n", ret);

	omap4_panda_init_rev();
	omap4_panda_i2c_init();
	platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
	platform_device_register(&omap_vwlan_device);
	omap_serial_init();
	omap_sdrc_init(NULL, NULL);
	omap4_twl6030_hsmmc_init(mmc);
	omap4_ehci_init();
	usb_musb_init(&musb_board_data);
	omap4_panda_display_init();
}
Пример #4
0
static void __init omap_4430sdp_init(void)
{
	int status;
	int package = OMAP_PACKAGE_CBS;

	if (omap_rev() == OMAP4430_REV_ES1_0)
		package = OMAP_PACKAGE_CBL;
	omap4_mux_init(board_mux, NULL, package);

	omap4_i2c_init();
	omap_sfh7741prox_init();
	platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
	omap_serial_init();
	omap_sdrc_init(NULL, NULL);
	omap4_sdp4430_wifi_init();
	omap4_twl6030_hsmmc_init(mmc);

	usb_musb_init(&musb_board_data);

	status = omap_ethernet_init();
	if (status) {
		pr_err("Ethernet initialization failed: %d\n", status);
	} else {
		sdp4430_spi_board_info[0].irq = gpio_to_irq(ETH_KS8851_IRQ);
		spi_register_board_info(sdp4430_spi_board_info,
				ARRAY_SIZE(sdp4430_spi_board_info));
	}

	status = omap4_keyboard_init(&sdp4430_keypad_data, &keypad_data);
	if (status)
		pr_err("Keypad initialization failed: %d\n", status);

	omap_4430sdp_display_init();
}
Пример #5
0
static void __init omap4_panda_init(void)
{
	int package = OMAP_PACKAGE_CBS;

	omap_emif_setup_device_details(&emif_devices, &emif_devices);

	if (omap_rev() == OMAP4430_REV_ES1_0)
		package = OMAP_PACKAGE_CBL;
	omap4_mux_init(board_mux, NULL, package);

	if (wl12xx_set_platform_data(&omap_panda_wlan_data))
		pr_err("error setting wl12xx data\n");

	omap4_panda_i2c_init();
	omap4_audio_conf();
	platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
/*
 * 	This is temporaray. With WLAN regsitering, we see that UART2 is not
 * 	idling on panda and CORE RET is not happening. So removing this FTM.
 * 	Later will be enabled.
 *
 *	platform_device_register(&omap_vwlan_device);
 */
	board_serial_init();
	omap4_twl6030_hsmmc_init(mmc);
	omap4_ehci_init();
	usb_musb_init(&musb_board_data);

	omap_dmm_init();
	omap4_panda_display_init();
}
static void __init omap_tablet_init(void)
{
	int status;
	int package = OMAP_PACKAGE_CBS;
	int tablet_rev = 0;

	if (omap_rev() == OMAP4430_REV_ES1_0)
		package = OMAP_PACKAGE_CBL;
	omap4_mux_init(board_mux, NULL, package);

	omap_emif_setup_device_details(&emif_devices, &emif_devices);

	omap_board_config = tablet_config;
	omap_board_config_size = ARRAY_SIZE(tablet_config);
	tablet_rev = omap_init_board_version(0);
	omap4_create_board_props();
	omap4_audio_conf();
	omap4_i2c_init();
	tablet_touch_init();
	tablet_camera_mux_init();
	omap_dmm_init();
	tablet_panel_init();
	tablet_pmic_mux_init();
	tablet_set_osc_timings();
	tablet_button_init();
	omap4_register_ion();
	board_serial_init();
	omap4_tablet_wifi_init();
	omap4_twl6030_hsmmc_init(mmc);
	tablet_sensor_init();
	platform_add_devices(tablet4430_devices,
			ARRAY_SIZE(tablet4430_devices));
	wake_lock_init(&st_wk_lock, WAKE_LOCK_SUSPEND, "st_wake_lock");
	omap4_ehci_ohci_init();
	usb_musb_init(&musb_board_data);

	status = omap_ethernet_init();
	if (status) {
		pr_err("Ethernet initialization failed: %d\n", status);
	} else {
		tablet_spi_board_info[0].irq = gpio_to_irq(ETH_KS8851_IRQ);
		spi_register_board_info(tablet_spi_board_info,
				ARRAY_SIZE(tablet_spi_board_info));
	}

	if (cpu_is_omap446x()) {
		/* Vsel0 = gpio, vsel1 = gnd */
		status = omap_tps6236x_board_setup(true, TPS62361_GPIO, -1,
					OMAP_PIN_OFF_OUTPUT_HIGH, -1);
		if (status)
			pr_err("TPS62361 initialization failed: %d\n", status);
	}

	omap_enable_smartreflex_on_init();
        if (enable_suspend_off)
                omap_pm_enable_off_mode();

}
Пример #7
0
static void __init omap4_panda_init(void)
{
	int package = OMAP_PACKAGE_CBS;
	int ret;

	if (omap_rev() == OMAP4430_REV_ES1_0)
		package = OMAP_PACKAGE_CBL;

	omap_emif_set_device_details(1, &lpddr2_elpida_2G_S4_x2_info,
			lpddr2_elpida_2G_S4_timings,
			ARRAY_SIZE(lpddr2_elpida_2G_S4_timings),
			&lpddr2_elpida_S4_min_tck,
			&custom_configs);

	omap_emif_set_device_details(2, &lpddr2_elpida_2G_S4_x2_info,
			lpddr2_elpida_2G_S4_timings,
			ARRAY_SIZE(lpddr2_elpida_2G_S4_timings),
			&lpddr2_elpida_S4_min_tck,
			&custom_configs);

	if (cpu_is_omap446x())
		gpio_leds[0].gpio = 110;

	omap4_mux_init(board_mux, NULL, package);

	omap_panda_wlan_data.irq = gpio_to_irq(GPIO_WIFI_IRQ);

	omap_register_mac_device_fixup_paths(panda_fixup_mac_device_paths,
				     ARRAY_SIZE(panda_fixup_mac_device_paths));

	ret = wl12xx_set_platform_data(&omap_panda_wlan_data);
	if (ret)
		pr_err("error setting wl12xx data: %d\n", ret);

	omap4_panda_init_rev();
	omap4_panda_i2c_init();
	platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
	platform_device_register(&omap_vwlan_device);
	omap_serial_init();
	omap_sdrc_init(NULL, NULL);
	omap4_twl6030_hsmmc_init(mmc);
	omap4_ehci_init();
	usb_musb_init(&musb_board_data);
	omap4_panda_display_init();
#ifdef CONFIG_MACH_OMAP4_PANDA_CAMERA_SUPPORT
	panda_camera_init(&panda_camera_board_info);
#endif
	if (cpu_is_omap446x()) {
		/* Vsel0 = gpio, vsel1 = gnd */
		ret = omap_tps6236x_board_setup(true, TPS62361_GPIO, -1,
				OMAP_PIN_OFF_OUTPUT_HIGH, -1);
		if (ret)
			pr_err("TPS62361 initialization failed: %d\n", ret);
	}
	omap_enable_smartreflex_on_init();
}
Пример #8
0
static void __init pcm049_init(void)
{
	pm_power_off = pcm049_power_off;
	omap4_mux_init(board_mux, NULL, OMAP_PACKAGE_CBS);
	pcm049_init_smsc911x();
	pcm049_i2c_init();
	platform_add_devices(pcm049_devices, ARRAY_SIZE(pcm049_devices));
	board_serial_init();
	omap_sdrc_init(NULL, NULL);
	omap4_twl6030_hsmmc_init(mmc);
	omap4_ehci_init();
	usb_musb_init(&musb_board_data);
	pcm049_display_init();
}
Пример #9
0
static void __init omap4_panda_init(void)
{
	int package = OMAP_PACKAGE_CBS;

	if (omap_rev() == OMAP4430_REV_ES1_0)
		package = OMAP_PACKAGE_CBL;
	omap4_mux_init(board_mux, package);

	omap4_panda_i2c_init();
	platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
	omap_serial_init();
	omap4_twl6030_hsmmc_init(mmc);
	omap4_ehci_init();
	usb_musb_init(&musb_board_data);
}
void __init omap_ovation_init(void)
{
	int package = OMAP_PACKAGE_CBS;

	if (omap_rev() == OMAP4430_REV_ES1_0)
		package = OMAP_PACKAGE_CBL;
	omap4_mux_init(board_mux, NULL, package);

	/* Turn off the external FET for twl6032 charger */
	gpio_request ( EXT_FET_EN , "EXT-FET-EN" );
	gpio_direction_output ( EXT_FET_EN , 0 );

	/* EVT1a bringup only */
	if (system_rev == OVATION_EVT1A) {
		/* The GPIO for Charging level - 1=2A, 0=1A */
		gpio_request(44, "ic_chg_level");
		gpio_direction_output(44, 1);
	}

	ovation_mem_init();
	omap_board_config = ovation_config;
	omap_board_config_size = ARRAY_SIZE(ovation_config);
	omap4_create_board_props();
	omap4_audio_conf();
	omap4_i2c_init();
	ovation_lcd_touch_init();
	ovation_touch_init();
	omap_dmm_init();
	ovation_panel_init();
	ovation_pmic_mux_init();
	ovation_button_init();
	kxtj9_dev_init();
	omap4_register_ion();
	board_serial_init();
	bn_wilink_init();

	omap4_twl6030_hsmmc_init(mmc);
	usb_musb_init(&musb_board_data);

	omap_enable_smartreflex_on_init();
        if (enable_suspend_off)
                omap_pm_enable_off_mode();

	/* Enable GG bat_low irq to wake up device to inform framework to shutdown. */
	omap_mux_init_gpio(BQ27500_BAT_LOW_GPIO, OMAP_PIN_INPUT | OMAP_PIN_OFF_WAKEUPENABLE);
}
Пример #11
0
static void __init omap_4430sdp_init(void)
{
	int status;
	int package = OMAP_PACKAGE_CBS;

	if (omap_rev() == OMAP4430_REV_ES1_0)
		package = OMAP_PACKAGE_CBL;
	omap4_mux_init(board_mux, NULL, package);

	omap_emif_setup_device_details(&emif_devices, &emif_devices);

	omap_board_config = sdp4430_config;
	omap_board_config_size = ARRAY_SIZE(sdp4430_config);

	omap4_i2c_init();
	omap_sfh7741prox_init();
	platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
	board_serial_init();
	omap4_twl6030_hsmmc_init(mmc);

	usb_musb_init(&musb_board_data);

	status = omap_ethernet_init();
	if (status) {
		pr_err("Ethernet initialization failed: %d\n", status);
	} else {
		sdp4430_spi_board_info[0].irq = gpio_to_irq(ETH_KS8851_IRQ);
		spi_register_board_info(sdp4430_spi_board_info,
				ARRAY_SIZE(sdp4430_spi_board_info));
	}

	status = omap4_keyboard_init(&sdp4430_keypad_data);
	if (status)
		pr_err("Keypad initialization failed: %d\n", status);

	omap_dmm_init();
	omap_4430sdp_display_init();

	if (cpu_is_omap446x()) {
		/* Vsel0 = gpio, vsel1 = gnd */
		status = omap_tps6236x_board_setup(true, TPS62361_GPIO, -1,
					OMAP_PIN_OFF_OUTPUT_HIGH, -1);
		if (status)
			pr_err("TPS62361 initialization failed: %d\n", status);
	}
}
static void __init omap4_panda_init(void)
{
	int package = OMAP_PACKAGE_CBS;

	if (omap_rev() == OMAP4430_REV_ES1_0)
		package = OMAP_PACKAGE_CBL;
	omap4_mux_init(board_mux, NULL, package);

	if (wl12xx_set_platform_data(&omap_panda_wlan_data))
		pr_err("error setting wl12xx data\n");

	omap4_panda_i2c_init();
	platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
	platform_device_register(&omap_vwlan_device);
	board_serial_init();
	omap4_twl6030_hsmmc_init(mmc);
	omap4_ehci_init();
	usb_musb_init(&musb_board_data);
	omap4_panda_display_init();
}
static void __init omap_4430sdp_init(void)
{
	int status;

	omap4_i2c_init();
	platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
	omap_serial_init();
	omap4_twl6030_hsmmc_init(mmc);
	/* FIXME: allow multi-omap to boot until musb is updated for omap4 */
	if (!cpu_is_omap44xx())
		usb_musb_init(&musb_board_data);

	status = omap_ethernet_init();
	if (status) {
		pr_err("Ethernet initialization failed: %d\n", status);
	} else {
		sdp4430_spi_board_info[0].irq = gpio_to_irq(ETH_KS8851_IRQ);
		spi_register_board_info(sdp4430_spi_board_info,
				ARRAY_SIZE(sdp4430_spi_board_info));
	}
}
Пример #14
0
static void __init omap_4430sdp_init(void)
{
	int status;

	omap4_i2c_init();
	platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
	omap_serial_init();
	omap4_twl6030_hsmmc_init(mmc);
	/* OMAP4 SDP uses internal transceiver so register nop transceiver */
	usb_nop_xceiv_register();
	if (!cpu_is_omap44xx())
		usb_musb_init(&musb_board_data);

	status = omap_ethernet_init();
	if (status) {
		pr_err("Ethernet initialization failed: %d\n", status);
	} else {
		sdp4430_spi_board_info[0].irq = gpio_to_irq(ETH_KS8851_IRQ);
		spi_register_board_info(sdp4430_spi_board_info,
				ARRAY_SIZE(sdp4430_spi_board_info));
	}
}
Пример #15
0
static void __init omap_4430sdp_init(void)
{
	int package = OMAP_PACKAGE_CBS;

	if (omap_rev() == OMAP4430_REV_ES1_0)
		package = OMAP_PACKAGE_CBL;
	omap4_mux_init(board_mux, NULL, package);

	lpddr_init();

	omap_board_config = sdp4430_config;
	omap_board_config_size = ARRAY_SIZE(sdp4430_config);

	omap_init_board_version(0);

	omap4_create_board_props();
	blaze_pmic_mux_init();

	omap4_i2c_init();
	/* JossCheng, 20111221, Porting gyro sensor and e-compass {*/
#ifdef CONFIG_MPU_SENSORS_MPU6050B1
	mpu6050b1_init();
#endif
	/* JossCheng, 20111221, Porting gyro sensor and e-compass }*/
	//blaze_sensor_init();
// Anvoi, 2011/12/14, Porting Light sensor driver to ICS
	omap4_als_init();
// Anvoi, 2011/12/14, Porting Light sensor driver to ICS
	//blaze_touch_init();
	omap4_register_ion();
/*SW5, Anvoi, 20111215, Config key VolumeUp/VolumeDown{*/
	platform_add_devices(bowser_devices, ARRAY_SIZE(bowser_devices));
/*SW5, Anvoi, 20111215, Config key VolumeUp/VolumeDown}*/
#if defined (CONFIG_TATE_HALL_SENSORS)
	hall_init();
#endif
	board_serial_init();
	omap4_twl6030_hsmmc_init(mmc);
	bowser_wifi_init();
	omap4_sdp4430_bt_init();

	omap4_ehci_ohci_init();
	usb_musb_init(&musb_board_data);

// BokeeLi, 2011/12/14, Porting proximity driver
#ifdef CONFIG_INPUT_PIC12LF1822_PROXIMITY
	omap4_proximity_init();
#endif
// BokeeLi, 2011/12/14, Porting proximity driver

/*SW5, Jamestsai, 1213, enable cypress{*/
#if defined(CONFIG_TOUCHSCREEN_CYPRESS_TTSP) || (CONFIG_TOUCHSCREEN_ATMEL_MXT) || defined(CONFIG_TOUCHSCREEN_ATMEL_MXT_MODULE)
	omap4_touch_init();
#endif
/*}SW5, Jamestsai, 1213, enable cypress*/

	omap_dmm_init();

	//omap_4430sdp_display_init();
	bowser_panel_init();


	omap_enable_smartreflex_on_init();
        if (enable_suspend_off)
                omap_pm_enable_off_mode();

}
static void __init board_init(void)
{
	int package = OMAP_PACKAGE_CBS;
	int status;

	omap_board_config = board_config;
	omap_board_config_size = ARRAY_SIZE(board_config);

	board_set_osc_timings();

	if (omap_rev() == OMAP4430_REV_ES1_0)
		package = OMAP_PACKAGE_CBL;
	omap4_mux_init(board_mux, NULL, package);

	archos_memory_init();

	omap4_i2c_init();
	board_buttons_init();
	board_xceiv_init();

	archos_usb_musb_init(&archos_vbus_info);
	archos_audio_twl6040_init(&twl6040_codec);
	archos_accel_mma8453q_init(&board_mma8453q_pdata);
	archos_compass_init(&board_akm8975_pdata);
	archos_battery_twl4030_bci_init(&board_bci_data);

	omap4_leds_init();

	platform_add_devices(a101s_devices, ARRAY_SIZE(a101s_devices));

	board_touch_init();
	wake_lock_init(&st_wk_lock, WAKE_LOCK_SUSPEND, "st_wake_lock");
	board_serial_init();
	board_wifi_init();

	usb_musb_init(&musb_board_data);

	omap4_twl6030_hsmmc_init(mmc);

	archos_omap4_ehci_init();
	archos_camera_mt9m114_init();

	omap_dmm_init();
	omap_board_display_init();

	archos_hsusb_ext_regulator_init();

	enable_board_wakeup_source();

	hardware_comp.tps62361 = 1;

	/* Vsel0 = gpio, vsel1 = gnd */
	status = omap_tps6236x_board_setup(true, TPS62361_GPIO, -1,
				OMAP_PIN_OFF_OUTPUT_HIGH, -1);
	if (status)
		pr_err("TPS62361 initialization failed: %d\n", status);

	omap_enable_smartreflex_on_init();

	if (omap_rev() >= OMAP4430_REV_ES2_3)
		if (enable_suspend_off)
			omap_pm_enable_off_mode();
}
void __init acclaim_peripherals_init(void)
{
	int status;
	int package = OMAP_PACKAGE_CBS;
	ulong sdram_size = get_sdram_size();

	ramconsole_init();

	if (omap_rev() == OMAP4430_REV_ES1_0)
		package = OMAP_PACKAGE_CBL;
	omap4_mux_init(board_mux, package);
	acclaim_board_init();

	if (sdram_vendor() == SAMSUNG_SDRAM) {
		if (sdram_size == SZ_512M) {
			omap_emif_setup_device_details(&emif_devices_512_samsung, &emif_devices_512_samsung);
		} else if (sdram_size == SZ_1G) {
			omap_emif_setup_device_details(&emif_devices_samsung, &emif_devices_samsung);
		} else {
			pr_err("sdram memory size does not exist, default to using 1024MB \n");
			omap_emif_setup_device_details(&emif_devices_samsung, &emif_devices_samsung);
		}
		printk(KERN_INFO"Samsung DDR Memory \n");
	} else if (sdram_vendor() == ELPIDA_SDRAM) {
		if (sdram_size == SZ_512M) {
			omap_emif_setup_device_details(&emif_devices_512_elpida, &emif_devices_512_elpida);
		} else if (sdram_size == SZ_1G) {
			omap_emif_setup_device_details(&emif_devices_elpida, &emif_devices_elpida);
		} else {
			pr_err("sdram memory size does not exist, default to using 1024MB \n");
			omap_emif_setup_device_details(&emif_devices_elpida, &emif_devices_elpida);
		}
		printk(KERN_INFO"Elpida DDR Memory \n");
	} else if (sdram_vendor() == HYNIX_SDRAM) {
		/* Re-use ELPIDA timings as they are absolutely the same */
		if (sdram_size == SZ_512M) {
			omap_emif_setup_device_details(&emif_devices_512_elpida, &emif_devices_512_elpida);
		} else if (sdram_size == SZ_1G) {
			omap_emif_setup_device_details(&emif_devices_elpida, &emif_devices_elpida);
		} else {
			pr_err("sdram memory size does not exist, default to using 1024MB \n");
			omap_emif_setup_device_details(&emif_devices_elpida, &emif_devices_elpida);
		}
		printk(KERN_INFO"Hynix DDR Memory \n");
	} else
		pr_err("Memory type does not exist\n");

	omap_init_emif_timings();

	enable_rtc_gpio();
	omap4_i2c_init();
	platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
	acclaim_init_charger();

	wake_lock_init(&uart_lock, WAKE_LOCK_SUSPEND, "uart_wake_lock");
	omap_serial_init(omap_serial_platform_data);
	omap4_twl6030_hsmmc_init(mmc);

#ifdef CONFIG_TIWLAN_SDIO
	config_wlan_mux();
#else
	//omap4_4430sdp_wifi_init();
#endif

	kxtf9_dev_init();
#ifdef CONFIG_BATTERY_MAX17042
	max17042_dev_init();
#endif

	usb_uhhtll_init(&usbhs_pdata);
	usb_musb_init(&musb_board_data);

	status = omap4_keypad_initialization(&sdp4430_keypad_data);
	if (status)
		pr_err("Keypad initialization failed: %d\n", status);

	spi_register_board_info(sdp4430_spi_board_info,
			ARRAY_SIZE(sdp4430_spi_board_info));

	acclaim_panel_init();
	enable_board_wakeup_source();
	omap_voltage_register_pmic(&omap_pmic_core, "core");
	omap_voltage_register_pmic(&omap_pmic_mpu, "mpu");
	omap_voltage_register_pmic(&omap_pmic_iva, "iva");
	omap_voltage_init_vc(&vc_config);
}
Пример #18
0
static void __init omap_4430sdp_init(void)
{
	int status;
	int package = OMAP_PACKAGE_CBS;

	if (omap_rev() == OMAP4430_REV_ES1_0)
		package = OMAP_PACKAGE_CBL;

	/* Modification for ELPIDA LPDDR2-s4 8Gb memory device */
	omap_emif_set_device_details(1, &lpddr2_elpida_8G_S4_x2_info,
			lpddr2_elpida_8G_S4_timings,
			ARRAY_SIZE(lpddr2_elpida_8G_S4_timings),
			&lpddr2_elpida_S4_min_tck,
			&custom_configs);

	omap_emif_set_device_details(2, &lpddr2_elpida_8G_S4_x2_info,
			lpddr2_elpida_8G_S4_timings,
			ARRAY_SIZE(lpddr2_elpida_8G_S4_timings),
			&lpddr2_elpida_S4_min_tck,
			&custom_configs);

	omap4_mux_init(board_mux, NULL, package);

	omap_board_config = sdp4430_config;
	omap_board_config_size = ARRAY_SIZE(sdp4430_config);

	omap4_i2c_init();
	omap4_twl6030_hsmmc_init(mmc);
	omap_sfh7741prox_init();
	platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
	omap_serial_init();
	omap_sdrc_init(NULL, NULL);
	omap4_sdp4430_wifi_init();

	usb_musb_init(&musb_board_data);

	status = omap_ethernet_init();
	if (status) {
		pr_err("Ethernet initialization failed: %d\n", status);
	} else {
		sdp4430_spi_board_info[0].irq = gpio_to_irq(ETH_KS8851_IRQ);
		spi_register_board_info(sdp4430_spi_board_info,
				ARRAY_SIZE(sdp4430_spi_board_info));
	}

	status = omap4_keyboard_init(&sdp4430_keypad_data, &keypad_data);
	if (status)
		pr_err("Keypad initialization failed: %d\n", status);

	omap_4430sdp_display_init();

	if (cpu_is_omap446x()) {
		/* Vsel0 = gpio, vsel1 = gnd */
		status = omap_tps6236x_board_setup(true, TPS62361_GPIO, -1,
					OMAP_PIN_OFF_OUTPUT_HIGH, -1);
		if (status)
			pr_err("TPS62361 initialization failed: %d\n", status);
	}
	omap_enable_smartreflex_on_init();
	omap_rprm_regulator_init(sdp4430_rprm_regulators,
				 ARRAY_SIZE(sdp4430_rprm_regulators));

	enable_board_wakeups();
}
Пример #19
0
static void __init omap_4430sdp_init(void)
{
	int status;
	int package = OMAP_PACKAGE_CBS;

	if (omap_rev() == OMAP4430_REV_ES1_0)
		package = OMAP_PACKAGE_CBL;
	omap4_mux_init(board_mux, NULL, package);

	if (cpu_is_omap447x())
		omap_emif_setup_device_details(&emif_devices_4470,
					       &emif_devices_4470);
	else
		omap_emif_setup_device_details(&emif_devices, &emif_devices);

	omap_board_config = sdp4430_config;
	omap_board_config_size = ARRAY_SIZE(sdp4430_config);

	omap_init_board_version(0);

	omap4_audio_conf();
	omap4_create_board_props();
	blaze_pmic_mux_init();
	blaze_set_osc_timings();
	omap4_i2c_init();
	blaze_sensor_init();
	blaze_touch_init();
	omap4_register_ion();
	platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
	wake_lock_init(&st_wk_lock, WAKE_LOCK_SUSPEND, "st_wake_lock");
	board_serial_init();
	omap4_sdp4430_wifi_init();
	omap4_twl6030_hsmmc_init(mmc);

	/* blaze_modem_init shall be called before omap4_ehci_ohci_init */
	if (!strcmp(modem_ipc, "hsi"))
		blaze_modem_init(true);
	else
		blaze_modem_init(false);

	omap4_ehci_ohci_init();

	usb_musb_init(&musb_board_data);

	status = omap_ethernet_init();
	if (status) {
		pr_err("Ethernet initialization failed: %d\n", status);
	} else {
		sdp4430_spi_board_info[0].irq = gpio_to_irq(ETH_KS8851_IRQ);
		spi_register_board_info(sdp4430_spi_board_info,
				ARRAY_SIZE(sdp4430_spi_board_info));
	}

	status = omap4_keyboard_init(&sdp4430_keypad_data);
	if (status)
		pr_err("Keypad initialization failed: %d\n", status);

	omap_dmm_init();
	omap_4430sdp_display_init();
	blaze_panel_init();
	blaze_keypad_init();
	init_duty_governor();
	if (cpu_is_omap446x()) {
		/* Vsel0 = gpio, vsel1 = gnd */
		status = omap_tps6236x_board_setup(true, TPS62361_GPIO, -1,
					OMAP_PIN_OFF_OUTPUT_HIGH, -1);
		if (status)
			pr_err("TPS62361 initialization failed: %d\n", status);
	}

	omap_enable_smartreflex_on_init();
	if (enable_suspend_off)
		omap_pm_enable_off_mode();

}