static void __init omap_tablet_init(void) { int package = OMAP_PACKAGE_CBS; int tablet_rev = 0; if (omap_rev() == OMAP4430_REV_ES1_0) package = OMAP_PACKAGE_CBL; omap4_mux_init(board_mux, NULL, package); acclaim_mem_init(); omap_board_config = tablet_config; omap_board_config_size = ARRAY_SIZE(tablet_config); tablet_rev = omap_init_board_version(0); omap4_create_board_props(); omap4_i2c_init(); #ifdef CONFIG_CHARGER_MAX8903 max8903_init_charger(); #endif //CONFIG_CHARGER_MAX8903 acclaim_touch_init(); omap_dmm_init(); acclaim_panel_init(); tablet_pmic_mux_init(); acclaim_button_init(); omap4_register_ion(); board_serial_init(); omap4_tablet_wifi_init(); omap4_twl6030_hsmmc_init(mmc); omap4_ehci_ohci_init(); usb_musb_init(&musb_board_data); omap_enable_smartreflex_on_init(); if (enable_suspend_off) omap_pm_enable_off_mode(); }
static void __init omap_4430sdp_init(void) { int status; int package = OMAP_PACKAGE_CBS; if (omap_rev() == OMAP4430_REV_ES1_0) package = OMAP_PACKAGE_CBL; omap4_mux_init(board_mux, package); omap4_i2c_init(); omap_sfh7741prox_init(); platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices)); omap_serial_init(); omap4_twl6030_hsmmc_init(mmc); /* OMAP4 SDP uses internal transceiver so register nop transceiver */ usb_nop_xceiv_register(0); /* FIXME: allow multi-omap to boot until musb is updated for omap4 */ if (!cpu_is_omap44xx()) usb_musb_init(&musb_board_data); status = omap_ethernet_init(); if (status) { pr_err("Ethernet initialization failed: %d\n", status); } else { sdp4430_spi_board_info[0].irq = gpio_to_irq(ETH_KS8851_IRQ); spi_register_board_info(sdp4430_spi_board_info, ARRAY_SIZE(sdp4430_spi_board_info)); } }
static void __init omap4_panda_init(void) { int package = OMAP_PACKAGE_CBS; int ret; if (omap_rev() == OMAP4430_REV_ES1_0) package = OMAP_PACKAGE_CBL; omap4_mux_init(board_mux, NULL, package); omap_panda_wlan_data.irq = gpio_to_irq(GPIO_WIFI_IRQ); ret = wl12xx_set_platform_data(&omap_panda_wlan_data); if (ret) pr_err("error setting wl12xx data: %d\n", ret); omap4_panda_init_rev(); omap4_panda_i2c_init(); platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices)); platform_device_register(&omap_vwlan_device); omap_serial_init(); omap_sdrc_init(NULL, NULL); omap4_twl6030_hsmmc_init(mmc); omap4_ehci_init(); usb_musb_init(&musb_board_data); omap4_panda_display_init(); }
static void __init omap_4430sdp_init(void) { int status; int package = OMAP_PACKAGE_CBS; if (omap_rev() == OMAP4430_REV_ES1_0) package = OMAP_PACKAGE_CBL; omap4_mux_init(board_mux, NULL, package); omap4_i2c_init(); omap_sfh7741prox_init(); platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices)); omap_serial_init(); omap_sdrc_init(NULL, NULL); omap4_sdp4430_wifi_init(); omap4_twl6030_hsmmc_init(mmc); usb_musb_init(&musb_board_data); status = omap_ethernet_init(); if (status) { pr_err("Ethernet initialization failed: %d\n", status); } else { sdp4430_spi_board_info[0].irq = gpio_to_irq(ETH_KS8851_IRQ); spi_register_board_info(sdp4430_spi_board_info, ARRAY_SIZE(sdp4430_spi_board_info)); } status = omap4_keyboard_init(&sdp4430_keypad_data, &keypad_data); if (status) pr_err("Keypad initialization failed: %d\n", status); omap_4430sdp_display_init(); }
static void __init omap4_panda_init(void) { int package = OMAP_PACKAGE_CBS; omap_emif_setup_device_details(&emif_devices, &emif_devices); if (omap_rev() == OMAP4430_REV_ES1_0) package = OMAP_PACKAGE_CBL; omap4_mux_init(board_mux, NULL, package); if (wl12xx_set_platform_data(&omap_panda_wlan_data)) pr_err("error setting wl12xx data\n"); omap4_panda_i2c_init(); omap4_audio_conf(); platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices)); /* * This is temporaray. With WLAN regsitering, we see that UART2 is not * idling on panda and CORE RET is not happening. So removing this FTM. * Later will be enabled. * * platform_device_register(&omap_vwlan_device); */ board_serial_init(); omap4_twl6030_hsmmc_init(mmc); omap4_ehci_init(); usb_musb_init(&musb_board_data); omap_dmm_init(); omap4_panda_display_init(); }
static void __init omap_tablet_init(void) { int status; int package = OMAP_PACKAGE_CBS; int tablet_rev = 0; if (omap_rev() == OMAP4430_REV_ES1_0) package = OMAP_PACKAGE_CBL; omap4_mux_init(board_mux, NULL, package); omap_emif_setup_device_details(&emif_devices, &emif_devices); omap_board_config = tablet_config; omap_board_config_size = ARRAY_SIZE(tablet_config); tablet_rev = omap_init_board_version(0); omap4_create_board_props(); omap4_audio_conf(); omap4_i2c_init(); tablet_touch_init(); tablet_camera_mux_init(); omap_dmm_init(); tablet_panel_init(); tablet_pmic_mux_init(); tablet_set_osc_timings(); tablet_button_init(); omap4_register_ion(); board_serial_init(); omap4_tablet_wifi_init(); omap4_twl6030_hsmmc_init(mmc); tablet_sensor_init(); platform_add_devices(tablet4430_devices, ARRAY_SIZE(tablet4430_devices)); wake_lock_init(&st_wk_lock, WAKE_LOCK_SUSPEND, "st_wake_lock"); omap4_ehci_ohci_init(); usb_musb_init(&musb_board_data); status = omap_ethernet_init(); if (status) { pr_err("Ethernet initialization failed: %d\n", status); } else { tablet_spi_board_info[0].irq = gpio_to_irq(ETH_KS8851_IRQ); spi_register_board_info(tablet_spi_board_info, ARRAY_SIZE(tablet_spi_board_info)); } if (cpu_is_omap446x()) { /* Vsel0 = gpio, vsel1 = gnd */ status = omap_tps6236x_board_setup(true, TPS62361_GPIO, -1, OMAP_PIN_OFF_OUTPUT_HIGH, -1); if (status) pr_err("TPS62361 initialization failed: %d\n", status); } omap_enable_smartreflex_on_init(); if (enable_suspend_off) omap_pm_enable_off_mode(); }
static void __init omap4_panda_init(void) { int package = OMAP_PACKAGE_CBS; int ret; if (omap_rev() == OMAP4430_REV_ES1_0) package = OMAP_PACKAGE_CBL; omap_emif_set_device_details(1, &lpddr2_elpida_2G_S4_x2_info, lpddr2_elpida_2G_S4_timings, ARRAY_SIZE(lpddr2_elpida_2G_S4_timings), &lpddr2_elpida_S4_min_tck, &custom_configs); omap_emif_set_device_details(2, &lpddr2_elpida_2G_S4_x2_info, lpddr2_elpida_2G_S4_timings, ARRAY_SIZE(lpddr2_elpida_2G_S4_timings), &lpddr2_elpida_S4_min_tck, &custom_configs); if (cpu_is_omap446x()) gpio_leds[0].gpio = 110; omap4_mux_init(board_mux, NULL, package); omap_panda_wlan_data.irq = gpio_to_irq(GPIO_WIFI_IRQ); omap_register_mac_device_fixup_paths(panda_fixup_mac_device_paths, ARRAY_SIZE(panda_fixup_mac_device_paths)); ret = wl12xx_set_platform_data(&omap_panda_wlan_data); if (ret) pr_err("error setting wl12xx data: %d\n", ret); omap4_panda_init_rev(); omap4_panda_i2c_init(); platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices)); platform_device_register(&omap_vwlan_device); omap_serial_init(); omap_sdrc_init(NULL, NULL); omap4_twl6030_hsmmc_init(mmc); omap4_ehci_init(); usb_musb_init(&musb_board_data); omap4_panda_display_init(); #ifdef CONFIG_MACH_OMAP4_PANDA_CAMERA_SUPPORT panda_camera_init(&panda_camera_board_info); #endif if (cpu_is_omap446x()) { /* Vsel0 = gpio, vsel1 = gnd */ ret = omap_tps6236x_board_setup(true, TPS62361_GPIO, -1, OMAP_PIN_OFF_OUTPUT_HIGH, -1); if (ret) pr_err("TPS62361 initialization failed: %d\n", ret); } omap_enable_smartreflex_on_init(); }
static void __init pcm049_init(void) { pm_power_off = pcm049_power_off; omap4_mux_init(board_mux, NULL, OMAP_PACKAGE_CBS); pcm049_init_smsc911x(); pcm049_i2c_init(); platform_add_devices(pcm049_devices, ARRAY_SIZE(pcm049_devices)); board_serial_init(); omap_sdrc_init(NULL, NULL); omap4_twl6030_hsmmc_init(mmc); omap4_ehci_init(); usb_musb_init(&musb_board_data); pcm049_display_init(); }
static void __init omap4_panda_init(void) { int package = OMAP_PACKAGE_CBS; if (omap_rev() == OMAP4430_REV_ES1_0) package = OMAP_PACKAGE_CBL; omap4_mux_init(board_mux, package); omap4_panda_i2c_init(); platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices)); omap_serial_init(); omap4_twl6030_hsmmc_init(mmc); omap4_ehci_init(); usb_musb_init(&musb_board_data); }
void __init omap_ovation_init(void) { int package = OMAP_PACKAGE_CBS; if (omap_rev() == OMAP4430_REV_ES1_0) package = OMAP_PACKAGE_CBL; omap4_mux_init(board_mux, NULL, package); /* Turn off the external FET for twl6032 charger */ gpio_request ( EXT_FET_EN , "EXT-FET-EN" ); gpio_direction_output ( EXT_FET_EN , 0 ); /* EVT1a bringup only */ if (system_rev == OVATION_EVT1A) { /* The GPIO for Charging level - 1=2A, 0=1A */ gpio_request(44, "ic_chg_level"); gpio_direction_output(44, 1); } ovation_mem_init(); omap_board_config = ovation_config; omap_board_config_size = ARRAY_SIZE(ovation_config); omap4_create_board_props(); omap4_audio_conf(); omap4_i2c_init(); ovation_lcd_touch_init(); ovation_touch_init(); omap_dmm_init(); ovation_panel_init(); ovation_pmic_mux_init(); ovation_button_init(); kxtj9_dev_init(); omap4_register_ion(); board_serial_init(); bn_wilink_init(); omap4_twl6030_hsmmc_init(mmc); usb_musb_init(&musb_board_data); omap_enable_smartreflex_on_init(); if (enable_suspend_off) omap_pm_enable_off_mode(); /* Enable GG bat_low irq to wake up device to inform framework to shutdown. */ omap_mux_init_gpio(BQ27500_BAT_LOW_GPIO, OMAP_PIN_INPUT | OMAP_PIN_OFF_WAKEUPENABLE); }
static void __init omap_4430sdp_init(void) { int status; int package = OMAP_PACKAGE_CBS; if (omap_rev() == OMAP4430_REV_ES1_0) package = OMAP_PACKAGE_CBL; omap4_mux_init(board_mux, NULL, package); omap_emif_setup_device_details(&emif_devices, &emif_devices); omap_board_config = sdp4430_config; omap_board_config_size = ARRAY_SIZE(sdp4430_config); omap4_i2c_init(); omap_sfh7741prox_init(); platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices)); board_serial_init(); omap4_twl6030_hsmmc_init(mmc); usb_musb_init(&musb_board_data); status = omap_ethernet_init(); if (status) { pr_err("Ethernet initialization failed: %d\n", status); } else { sdp4430_spi_board_info[0].irq = gpio_to_irq(ETH_KS8851_IRQ); spi_register_board_info(sdp4430_spi_board_info, ARRAY_SIZE(sdp4430_spi_board_info)); } status = omap4_keyboard_init(&sdp4430_keypad_data); if (status) pr_err("Keypad initialization failed: %d\n", status); omap_dmm_init(); omap_4430sdp_display_init(); if (cpu_is_omap446x()) { /* Vsel0 = gpio, vsel1 = gnd */ status = omap_tps6236x_board_setup(true, TPS62361_GPIO, -1, OMAP_PIN_OFF_OUTPUT_HIGH, -1); if (status) pr_err("TPS62361 initialization failed: %d\n", status); } }
static void __init omap4_panda_init(void) { int package = OMAP_PACKAGE_CBS; if (omap_rev() == OMAP4430_REV_ES1_0) package = OMAP_PACKAGE_CBL; omap4_mux_init(board_mux, NULL, package); if (wl12xx_set_platform_data(&omap_panda_wlan_data)) pr_err("error setting wl12xx data\n"); omap4_panda_i2c_init(); platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices)); platform_device_register(&omap_vwlan_device); board_serial_init(); omap4_twl6030_hsmmc_init(mmc); omap4_ehci_init(); usb_musb_init(&musb_board_data); omap4_panda_display_init(); }
static void __init omap_4430sdp_init(void) { int status; omap4_i2c_init(); platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices)); omap_serial_init(); omap4_twl6030_hsmmc_init(mmc); /* FIXME: allow multi-omap to boot until musb is updated for omap4 */ if (!cpu_is_omap44xx()) usb_musb_init(&musb_board_data); status = omap_ethernet_init(); if (status) { pr_err("Ethernet initialization failed: %d\n", status); } else { sdp4430_spi_board_info[0].irq = gpio_to_irq(ETH_KS8851_IRQ); spi_register_board_info(sdp4430_spi_board_info, ARRAY_SIZE(sdp4430_spi_board_info)); } }
static void __init omap_4430sdp_init(void) { int status; omap4_i2c_init(); platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices)); omap_serial_init(); omap4_twl6030_hsmmc_init(mmc); /* OMAP4 SDP uses internal transceiver so register nop transceiver */ usb_nop_xceiv_register(); if (!cpu_is_omap44xx()) usb_musb_init(&musb_board_data); status = omap_ethernet_init(); if (status) { pr_err("Ethernet initialization failed: %d\n", status); } else { sdp4430_spi_board_info[0].irq = gpio_to_irq(ETH_KS8851_IRQ); spi_register_board_info(sdp4430_spi_board_info, ARRAY_SIZE(sdp4430_spi_board_info)); } }
static void __init omap_4430sdp_init(void) { int package = OMAP_PACKAGE_CBS; if (omap_rev() == OMAP4430_REV_ES1_0) package = OMAP_PACKAGE_CBL; omap4_mux_init(board_mux, NULL, package); lpddr_init(); omap_board_config = sdp4430_config; omap_board_config_size = ARRAY_SIZE(sdp4430_config); omap_init_board_version(0); omap4_create_board_props(); blaze_pmic_mux_init(); omap4_i2c_init(); /* JossCheng, 20111221, Porting gyro sensor and e-compass {*/ #ifdef CONFIG_MPU_SENSORS_MPU6050B1 mpu6050b1_init(); #endif /* JossCheng, 20111221, Porting gyro sensor and e-compass }*/ //blaze_sensor_init(); // Anvoi, 2011/12/14, Porting Light sensor driver to ICS omap4_als_init(); // Anvoi, 2011/12/14, Porting Light sensor driver to ICS //blaze_touch_init(); omap4_register_ion(); /*SW5, Anvoi, 20111215, Config key VolumeUp/VolumeDown{*/ platform_add_devices(bowser_devices, ARRAY_SIZE(bowser_devices)); /*SW5, Anvoi, 20111215, Config key VolumeUp/VolumeDown}*/ #if defined (CONFIG_TATE_HALL_SENSORS) hall_init(); #endif board_serial_init(); omap4_twl6030_hsmmc_init(mmc); bowser_wifi_init(); omap4_sdp4430_bt_init(); omap4_ehci_ohci_init(); usb_musb_init(&musb_board_data); // BokeeLi, 2011/12/14, Porting proximity driver #ifdef CONFIG_INPUT_PIC12LF1822_PROXIMITY omap4_proximity_init(); #endif // BokeeLi, 2011/12/14, Porting proximity driver /*SW5, Jamestsai, 1213, enable cypress{*/ #if defined(CONFIG_TOUCHSCREEN_CYPRESS_TTSP) || (CONFIG_TOUCHSCREEN_ATMEL_MXT) || defined(CONFIG_TOUCHSCREEN_ATMEL_MXT_MODULE) omap4_touch_init(); #endif /*}SW5, Jamestsai, 1213, enable cypress*/ omap_dmm_init(); //omap_4430sdp_display_init(); bowser_panel_init(); omap_enable_smartreflex_on_init(); if (enable_suspend_off) omap_pm_enable_off_mode(); }
static void __init board_init(void) { int package = OMAP_PACKAGE_CBS; int status; omap_board_config = board_config; omap_board_config_size = ARRAY_SIZE(board_config); board_set_osc_timings(); if (omap_rev() == OMAP4430_REV_ES1_0) package = OMAP_PACKAGE_CBL; omap4_mux_init(board_mux, NULL, package); archos_memory_init(); omap4_i2c_init(); board_buttons_init(); board_xceiv_init(); archos_usb_musb_init(&archos_vbus_info); archos_audio_twl6040_init(&twl6040_codec); archos_accel_mma8453q_init(&board_mma8453q_pdata); archos_compass_init(&board_akm8975_pdata); archos_battery_twl4030_bci_init(&board_bci_data); omap4_leds_init(); platform_add_devices(a101s_devices, ARRAY_SIZE(a101s_devices)); board_touch_init(); wake_lock_init(&st_wk_lock, WAKE_LOCK_SUSPEND, "st_wake_lock"); board_serial_init(); board_wifi_init(); usb_musb_init(&musb_board_data); omap4_twl6030_hsmmc_init(mmc); archos_omap4_ehci_init(); archos_camera_mt9m114_init(); omap_dmm_init(); omap_board_display_init(); archos_hsusb_ext_regulator_init(); enable_board_wakeup_source(); hardware_comp.tps62361 = 1; /* Vsel0 = gpio, vsel1 = gnd */ status = omap_tps6236x_board_setup(true, TPS62361_GPIO, -1, OMAP_PIN_OFF_OUTPUT_HIGH, -1); if (status) pr_err("TPS62361 initialization failed: %d\n", status); omap_enable_smartreflex_on_init(); if (omap_rev() >= OMAP4430_REV_ES2_3) if (enable_suspend_off) omap_pm_enable_off_mode(); }
void __init acclaim_peripherals_init(void) { int status; int package = OMAP_PACKAGE_CBS; ulong sdram_size = get_sdram_size(); ramconsole_init(); if (omap_rev() == OMAP4430_REV_ES1_0) package = OMAP_PACKAGE_CBL; omap4_mux_init(board_mux, package); acclaim_board_init(); if (sdram_vendor() == SAMSUNG_SDRAM) { if (sdram_size == SZ_512M) { omap_emif_setup_device_details(&emif_devices_512_samsung, &emif_devices_512_samsung); } else if (sdram_size == SZ_1G) { omap_emif_setup_device_details(&emif_devices_samsung, &emif_devices_samsung); } else { pr_err("sdram memory size does not exist, default to using 1024MB \n"); omap_emif_setup_device_details(&emif_devices_samsung, &emif_devices_samsung); } printk(KERN_INFO"Samsung DDR Memory \n"); } else if (sdram_vendor() == ELPIDA_SDRAM) { if (sdram_size == SZ_512M) { omap_emif_setup_device_details(&emif_devices_512_elpida, &emif_devices_512_elpida); } else if (sdram_size == SZ_1G) { omap_emif_setup_device_details(&emif_devices_elpida, &emif_devices_elpida); } else { pr_err("sdram memory size does not exist, default to using 1024MB \n"); omap_emif_setup_device_details(&emif_devices_elpida, &emif_devices_elpida); } printk(KERN_INFO"Elpida DDR Memory \n"); } else if (sdram_vendor() == HYNIX_SDRAM) { /* Re-use ELPIDA timings as they are absolutely the same */ if (sdram_size == SZ_512M) { omap_emif_setup_device_details(&emif_devices_512_elpida, &emif_devices_512_elpida); } else if (sdram_size == SZ_1G) { omap_emif_setup_device_details(&emif_devices_elpida, &emif_devices_elpida); } else { pr_err("sdram memory size does not exist, default to using 1024MB \n"); omap_emif_setup_device_details(&emif_devices_elpida, &emif_devices_elpida); } printk(KERN_INFO"Hynix DDR Memory \n"); } else pr_err("Memory type does not exist\n"); omap_init_emif_timings(); enable_rtc_gpio(); omap4_i2c_init(); platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices)); acclaim_init_charger(); wake_lock_init(&uart_lock, WAKE_LOCK_SUSPEND, "uart_wake_lock"); omap_serial_init(omap_serial_platform_data); omap4_twl6030_hsmmc_init(mmc); #ifdef CONFIG_TIWLAN_SDIO config_wlan_mux(); #else //omap4_4430sdp_wifi_init(); #endif kxtf9_dev_init(); #ifdef CONFIG_BATTERY_MAX17042 max17042_dev_init(); #endif usb_uhhtll_init(&usbhs_pdata); usb_musb_init(&musb_board_data); status = omap4_keypad_initialization(&sdp4430_keypad_data); if (status) pr_err("Keypad initialization failed: %d\n", status); spi_register_board_info(sdp4430_spi_board_info, ARRAY_SIZE(sdp4430_spi_board_info)); acclaim_panel_init(); enable_board_wakeup_source(); omap_voltage_register_pmic(&omap_pmic_core, "core"); omap_voltage_register_pmic(&omap_pmic_mpu, "mpu"); omap_voltage_register_pmic(&omap_pmic_iva, "iva"); omap_voltage_init_vc(&vc_config); }
static void __init omap_4430sdp_init(void) { int status; int package = OMAP_PACKAGE_CBS; if (omap_rev() == OMAP4430_REV_ES1_0) package = OMAP_PACKAGE_CBL; /* Modification for ELPIDA LPDDR2-s4 8Gb memory device */ omap_emif_set_device_details(1, &lpddr2_elpida_8G_S4_x2_info, lpddr2_elpida_8G_S4_timings, ARRAY_SIZE(lpddr2_elpida_8G_S4_timings), &lpddr2_elpida_S4_min_tck, &custom_configs); omap_emif_set_device_details(2, &lpddr2_elpida_8G_S4_x2_info, lpddr2_elpida_8G_S4_timings, ARRAY_SIZE(lpddr2_elpida_8G_S4_timings), &lpddr2_elpida_S4_min_tck, &custom_configs); omap4_mux_init(board_mux, NULL, package); omap_board_config = sdp4430_config; omap_board_config_size = ARRAY_SIZE(sdp4430_config); omap4_i2c_init(); omap4_twl6030_hsmmc_init(mmc); omap_sfh7741prox_init(); platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices)); omap_serial_init(); omap_sdrc_init(NULL, NULL); omap4_sdp4430_wifi_init(); usb_musb_init(&musb_board_data); status = omap_ethernet_init(); if (status) { pr_err("Ethernet initialization failed: %d\n", status); } else { sdp4430_spi_board_info[0].irq = gpio_to_irq(ETH_KS8851_IRQ); spi_register_board_info(sdp4430_spi_board_info, ARRAY_SIZE(sdp4430_spi_board_info)); } status = omap4_keyboard_init(&sdp4430_keypad_data, &keypad_data); if (status) pr_err("Keypad initialization failed: %d\n", status); omap_4430sdp_display_init(); if (cpu_is_omap446x()) { /* Vsel0 = gpio, vsel1 = gnd */ status = omap_tps6236x_board_setup(true, TPS62361_GPIO, -1, OMAP_PIN_OFF_OUTPUT_HIGH, -1); if (status) pr_err("TPS62361 initialization failed: %d\n", status); } omap_enable_smartreflex_on_init(); omap_rprm_regulator_init(sdp4430_rprm_regulators, ARRAY_SIZE(sdp4430_rprm_regulators)); enable_board_wakeups(); }
static void __init omap_4430sdp_init(void) { int status; int package = OMAP_PACKAGE_CBS; if (omap_rev() == OMAP4430_REV_ES1_0) package = OMAP_PACKAGE_CBL; omap4_mux_init(board_mux, NULL, package); if (cpu_is_omap447x()) omap_emif_setup_device_details(&emif_devices_4470, &emif_devices_4470); else omap_emif_setup_device_details(&emif_devices, &emif_devices); omap_board_config = sdp4430_config; omap_board_config_size = ARRAY_SIZE(sdp4430_config); omap_init_board_version(0); omap4_audio_conf(); omap4_create_board_props(); blaze_pmic_mux_init(); blaze_set_osc_timings(); omap4_i2c_init(); blaze_sensor_init(); blaze_touch_init(); omap4_register_ion(); platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices)); wake_lock_init(&st_wk_lock, WAKE_LOCK_SUSPEND, "st_wake_lock"); board_serial_init(); omap4_sdp4430_wifi_init(); omap4_twl6030_hsmmc_init(mmc); /* blaze_modem_init shall be called before omap4_ehci_ohci_init */ if (!strcmp(modem_ipc, "hsi")) blaze_modem_init(true); else blaze_modem_init(false); omap4_ehci_ohci_init(); usb_musb_init(&musb_board_data); status = omap_ethernet_init(); if (status) { pr_err("Ethernet initialization failed: %d\n", status); } else { sdp4430_spi_board_info[0].irq = gpio_to_irq(ETH_KS8851_IRQ); spi_register_board_info(sdp4430_spi_board_info, ARRAY_SIZE(sdp4430_spi_board_info)); } status = omap4_keyboard_init(&sdp4430_keypad_data); if (status) pr_err("Keypad initialization failed: %d\n", status); omap_dmm_init(); omap_4430sdp_display_init(); blaze_panel_init(); blaze_keypad_init(); init_duty_governor(); if (cpu_is_omap446x()) { /* Vsel0 = gpio, vsel1 = gnd */ status = omap_tps6236x_board_setup(true, TPS62361_GPIO, -1, OMAP_PIN_OFF_OUTPUT_HIGH, -1); if (status) pr_err("TPS62361 initialization failed: %d\n", status); } omap_enable_smartreflex_on_init(); if (enable_suspend_off) omap_pm_enable_off_mode(); }