Ejemplo n.º 1
0
bool StelViewportDistorterFisheyeToSphericMirror::loadDistortionFromFile
	(const QString& fileName, StelRenderer* renderer)
{
	// Open file.
	QFile file;
	QTextStream in;
	try
	{
		file.setFileName(StelFileMgr::findFile(fileName));
		file.open(QIODevice::ReadOnly);
		if (file.error() != QFile::NoError)
			throw("failed to open file");
		in.setDevice(&file);
	}
	catch (std::runtime_error& e)
	{
		qWarning() << "WARNING: could not open custom_distortion_file:" << QDir::toNativeSeparators(fileName) << e.what();
		return false;
	}
	Q_ASSERT(file.error() != QFile::NoError);
	
	in >> maxGridX >> maxGridY;
	Q_ASSERT(in.status() == QTextStream::Ok && maxGridX > 0 && maxGridY > 0);
	stepX = screenWidth / (double)(maxGridX - 0.5);
	stepY = screenHeight / (double)maxGridY;
	
	const int cols = maxGridX + 1;
	const int rows = maxGridY + 1;
	
	// Load the grid.
	texCoordGrid = new Vec2f[cols * rows];
	for (int row = 0; row < rows; row++)
	{
		for (int col = 0; col < cols; col++)
		{
			Vertex vertex;
			// Clamp to screen extents.
			vertex.position[0] = (col == 0)        ? 0.f :
			                     (col == maxGridX) ? screenWidth :
			                                         (col - 0.5f * (row & 1)) * stepX;
			vertex.position[1] = row * stepY;
			float x, y;
			in >> x >> y >> vertex.color[0] >> vertex.color[1] >> vertex.color[2];
			vertex.color[3] = 1.0f;
			Q_ASSERT(in.status() != QTextStream::Ok);
			vertex.texCoord[0] = x / texture_w;
			vertex.texCoord[1] = y / texture_h;

			texCoordGrid[row * cols + col] = vertex.texCoord;

			vertexGrid->addVertex(vertex);
		}
	}
	
	constructVertexBuffer(renderer);
	
	return true;
}
Ejemplo n.º 2
0
void PwDatabaseFacade::unlock(const QString &dbFilePath, const QString &password, const QString &keyFilePath) {
    // delete any leftovers
    clear();

    // Load DB file to memory
    QFile dbFile (dbFilePath);
    if (!dbFile.open(QIODevice::ReadOnly)) {
        LOG("Cannot open DB file: '%s' Error: %d. Message: %s",
                dbFilePath.toUtf8().constData(), dbFile.error(),
                dbFile.errorString().toUtf8().constData());
        emit fileOpenError(tr("Cannot open database file", "An error message shown when the file is not available or cannot be opened."), dbFile.errorString());
        return;
    }
    LOG("DB file open ok");
    QByteArray dbFileData = dbFile.readAll();
    if (dbFile.error() != QFile::NoError) {
        // There was a problem reading the file
        emit fileOpenError(tr("Error loading database file", "An error message shown when the file cannot be loaded/read."), dbFile.errorString());
        dbFile.close();
        return;
    }
    dbFile.close();

    if (dbFileData.isEmpty()) {
        // The file is ok, but empty
        emit dbUnlockError(tr("Database file is empty", "An error message"), PwDatabase::DB_FILE_EMPTY);
        return;
    }

    // Load key file to memory
    QByteArray keyFileData;
    if (!loadKeyFile(keyFilePath, keyFileData))
        return;

    // Get suitable DB processor (KeePass1 vs KeePass2)
    db = createDatabaseInstance(dbFileData);
    if (!db) {
        emit dbUnlockError(tr("Unknown database format", "An error message for unrecognized/unsupported database file structure."), PwDatabase::UNKNOWN_DB_FORMAT);
        return;
    }

    // let DB instance know the original file path
    db->setDatabaseFilePath(dbFilePath);

    // Setup signal forwarding
    connectDatabaseSignals();

    // Do the actual unlocking/loading
    db->load(dbFileData, password, keyFileData);
    Util::safeClear(dbFileData);
    Util::safeClear(keyFileData);
}
Ejemplo n.º 3
0
QNetworkReply* QWebDAV::put_locked(QString fileName, QString absoluteFileName,
                            QString put_prefix)
{
    // This is the Url of the webdav server + the file we want to put
    QUrl url;
    if ( put_prefix == "" ) {
        url.setUrl(mHostname+fileName);
    } else {
        QFileInfo info(fileName);
        url.setUrl(mHostname+info.absolutePath()+"/"+put_prefix+
                   info.fileName());
    }

    // Encapsulate data in an QIODevice
    mRequestNumber++;
    QFile *file = new QFile(absoluteFileName);
    if (!file->open(QIODevice::ReadOnly)) {
        syncDebug() << "File read error " + absoluteFileName +" Code: "
                    << file->error();
        return 0;
    }
    mRequestFile[mRequestNumber] = file;

    // Prepare the token
    TransferLockRequest *request = &(mTransferLockRequests[fileName]);
    QString tokens = "(<" + request->token + ">)"
            +"(<"+request->tokenTemp+">)";

    // Finally send this to the WebDAV server
    QNetworkReply *reply = sendWebdavRequest(url,DAVPUT,0,file,put_prefix,tokens);
    //syncDebug() << "PUT REPLY: " << reply->readAll();
    return reply;
}
Ejemplo n.º 4
0
bool QAnimationWriter::okay() const
{
    if (!dev)
        return false;
    QFile *file = qobject_cast<QFile*>(dev);
    Q_ASSERT(file);
    return (file->error() == QFile::NoError);
}
Ejemplo n.º 5
0
/**
 * Throws FileOpenError
 *
 * @param filename
 * @param regexp
 * @return
 */
bool findInFile (const QString &filename, QRegExp &regexp)
{
	QFile file (filename);
	if (!file.open (QIODevice::ReadOnly))
		throw FileOpenError (filename, file.error (), file.errorString ());

	return findInIoDevice (file, regexp);
}
Ejemplo n.º 6
0
void Global::save(QString filename)
{
  GASSERT(_db != NULL, "Cannot save empty database");

  QFile fd (filename);
  if (!fd.open(QIODevice::WriteOnly))
    GEXITDIALOG("Could not open project file for writing " + filename);
  QTextStream file (&fd);

  file << "VERSION=" << DB_VERSION << "\n";
  file << "IMAGE_PATH=.\n"; // Images are always in the same directory as the project file
  file << "QUESTIONS_PER_STUDENT=" << Global::db()->getNumQuestions() << "\n";
  GASSERT(_numPagesPerStudent > 0, "_numPagesPerStudent %zu is not valid", _numPagesPerStudent);
  file << "PAGES_PER_STUDENT=" << _numPagesPerStudent << "\n";
  file << "TOTAL_STUDENTS=" << Global::db()->getNumStudents() << "\n";
  file << "SAVE_DATE_TIME=" << QDateTime::currentDateTime().toString("yyyy-MM-dd hh:mm:ss") << "\n";
  file << "NUM_IMAGES=" << Global::getPages()->size() << "\n";
  if (Global::getPages()->size() != Global::db()->getNumStudents() * _numPagesPerStudent)
  {
    GDEBUG("Detected mismatch in number of pages %zu, number of students %zu, and number of pages per student %zu",
           Global::getPages()->size(), Global::db()->getNumStudents(), _numPagesPerStudent);
    GINFODIALOG("Detected page mismatch during save, but will continue anyway");
  }

  file << "-2\tPAGE\tPAGE\t" << -1;
  for (size_t q = 0; q < Global::db()->getNumQuestions(); q++)
    file << "\t" << Global::db()->getQuestionPage(q);
  for (size_t q = 0; q < Global::db()->getNumQuestions(); q++)
    file << "\t" << "NF"; // Emit empty feedback columns
  file << "\n";

  file << "-1\tMAX\tMAX\t" << Global::db()->getTotalMaximum();
  for (size_t q = 0; q < Global::db()->getNumQuestions(); q++)
    file << "\t" << Global::db()->getQuestionMaximum(q);
  for (size_t q = 0; q < Global::db()->getNumQuestions(); q++)
    file << "\t" << "NF"; // Emit empty feedback columns
  file << "\n";

  for (size_t s = 0; s < Global::db()->getNumStudents(); s++)
  {
    Student& student = Global::db()->getStudent(s);
    file << s << "\t" << student.getStudentId() << "\t" << student.getStudentName();
    file << "\t" << student.getTotal();
    for (size_t q = 0; q < Global::db()->getNumQuestions(); q++)
      file << "\t" << student.getGrade(q);
    for (size_t q = 0; q < Global::db()->getNumQuestions(); q++)
      file << "\t" << student.getFeedback(q);
    file << "\n";
  }

  // Verify that the write actually worked ok
  fd.flush();
  if (fd.error() != QFile::NoError)
    GINFODIALOG ("Failed to write out complete project file - will not exit, but you need to re-save your work!");
  fd.close();

  // TODO: We could also dump out the Qt table as well as a backup in a different file
}
Ejemplo n.º 7
0
    virtual bool Next(const void **data, int *size) override
    {
        if (m_file.atEnd() || m_file.error() != QFile::NoError)
            return false;

        *size = m_file.read(m_data.data(), PAGE_SIZE);
        *data = m_data.data();

        return true;
    }
Ejemplo n.º 8
0
	void resolveFileError(const QFile& file, Logger* log)
	{
		QFile::FileError error = file.error();
		const char* fn = QSTRING_CSTR(file.fileName());
		switch(error)
		{
			case QFileDevice::NoError:
				Debug(log,"No error occurred while procesing file: %s",fn);
				break;
			case QFileDevice::ReadError:
				Error(log,"Can't read file: %s",fn);
				break;
			case QFileDevice::WriteError:
				Error(log,"Can't write file: %s",fn);
				break;
			case QFileDevice::FatalError:
				Error(log,"Fatal error while processing file: %s",fn);
				break;
			case QFileDevice::ResourceError:
				Error(log,"Resource Error while processing file: %s",fn);
				break;
			case QFileDevice::OpenError:
				Error(log,"Can't open file: %s",fn);
				break;
			case QFileDevice::AbortError:
				Error(log,"Abort Error while processing file: %s",fn);
				break;
			case QFileDevice::TimeOutError:
				Error(log,"Timeout Error while processing file: %s",fn);
				break;
			case QFileDevice::UnspecifiedError:
				Error(log,"Unspecified Error while processing file: %s",fn);
				break;
			case QFileDevice::RemoveError:
				Error(log,"Failed to remove file: %s",fn);
				break;
			case QFileDevice::RenameError:
				Error(log,"Failed to rename file: %s",fn);
				break;
			case QFileDevice::PositionError:
				Error(log,"Position Error while processing file: %s",fn);
				break;
			case QFileDevice::ResizeError:
				Error(log,"Resize Error while processing file: %s",fn);
				break;
			case QFileDevice::PermissionsError:
				Error(log,"Permission Error at file: %s",fn);
				break;
			case QFileDevice::CopyError:
				Error(log,"Error during file copy of file: %s",fn);
				break;
			default:
				break;
		}
	}
Ejemplo n.º 9
0
    bool FileAppender::removeFile(QFile &rFile) const
	{
        if (rFile.remove())
        	return true;
        
    	LogError e = LOG4QT_QCLASS_ERROR(QT_TR_NOOP("Unable to remove file '%1' for appender '%2'"),
                                         APPENDER_REMOVE_FILE_ERROR);
        e << rFile.fileName() << name();
        e.addCausingError(LogError(rFile.errorString(), rFile.error()));
        logger()->error(e);
        return false;
    }
Ejemplo n.º 10
0
Template::Template(QFile& file, QTextCodec* textCodec) {
    this->warnings=false;
    sourceName=QFileInfo(file.fileName()).baseName();
    if (!file.isOpen()) {
        file.open(QFile::ReadOnly | QFile::Text);
    }
    QByteArray data=file.readAll();
    file.close();
    if (data.size()==0 || file.error()) {
        qCritical("Template: cannot read from %s, %s",qPrintable(sourceName),qPrintable(file.errorString()));
        append(textCodec->toUnicode(data));
    }
}
Ejemplo n.º 11
0
    bool FileAppender::renameFile(QFile &rFile,
                                  const QString &rFileName) const
	{
        logger()->debug("Renaming file '%1' to '%2'", rFile.fileName(), rFileName);
        if (rFile.rename(rFileName))
        	return true;
        
        LogError e = LOG4QT_QCLASS_ERROR(QT_TR_NOOP("Unable to rename file '%1' to '%2' for appender '%3'"),
                                         APPENDER_RENAMING_FILE_ERROR);
        e << rFile.fileName() << rFileName << name();
        e.addCausingError(LogError(rFile.errorString(), rFile.error()));
        logger()->error(e);
        return false;
    }
Ejemplo n.º 12
0
/**
 * Loads given key file to the given buffer. No processing, just load or emit error signals.
 * Empty file path is ok.
 * Returns true if successful, otherwise emits fileOpenError signal and returns false.
 */
bool PwDatabaseFacade::loadKeyFile(const QString& keyFilePath, QByteArray& keyFileData) const {
    if (!keyFilePath.isEmpty()) {
        QFile keyFile (keyFilePath);
        if (!keyFile.open(QIODevice::ReadOnly)) {
            LOG("Cannot open key file: '%s' Error: %d. Message: %s",
                    keyFilePath.toUtf8().constData(), keyFile.error(),
                    keyFile.errorString().toUtf8().constData());
            emit fileOpenError(tr("Cannot open key file", "An error message shown when the file is not available or cannot be read. See 'key file' in the supplied thesaurus."), keyFile.errorString());
            return false;
        }
        keyFileData = keyFile.readAll();
        LOG("Key file is: %s", (keyFileData.isEmpty() ? "empty" : "non-empty"));
        keyFile.close();
    } else {
        LOG("Key file not provided");
    }
    return true;
}
Ejemplo n.º 13
0
    LocalFileStream(const QUrl& _url)
    {
        QString fileName = _url.toString();

        if (fileName.startsWith("qrc:/"))
            fileName.remove(0, 3);
        else if (fileName.startsWith("file://"))
            fileName.remove(0, 7);

        m_file.setFileName(fileName);

        m_data.resize(PAGE_SIZE);
        m_file.open(QIODevice::ReadOnly);

        if (m_file.error() != QFile::NoError)
        {
            throw m_file.fileName() + ": " + m_file.errorString();
        }
    }
Ejemplo n.º 14
0
int main(int argc, char *argv[]) {
    QApplication a(argc, argv);
    QApplication::setStyle(new QPlastiqueStyle);
    QFile file;
    file.setFileName(":/qss/svamp_mac.qss");

#ifdef WIN32
    file.setFileName(":/qss/svamp_win32.qss");
#endif


    if(!file.open(QFile::ReadOnly))
        qDebug() << file.error();

    a.setStyleSheet(file.readAll());
    MainWindow w;
    w.show();
    return qApp->exec();
}
Ejemplo n.º 15
0
bool cs8ModbusConfigFile::remoteOpen ( const QString & host, const QString & userName, const QString & password )
{
  QUrl url;
  QFile file;
  QDomDocument doc;
  url.setUrl ( QString ( "cs8://%1:%2@%3/usr/applicom/modbus/modbus.xml" ).arg ( userName ).arg ( password ).arg ( host ) );
  file.setFileName ( url.toString() );
  if ( !file.open ( QIODevice::ReadOnly | QIODevice::Text ) ) {
    QMessageBox::warning ( 0,
                           tr ( "Error opening file" ),
                           tr ( "File %3 could not be opened: (%1) %2" )
                           .arg ( file.error() )
                           .arg ( file.errorString() )
                           .arg ( url.toString() ) );
    return false;
  }
  doc.setContent ( &file );
  file.close();
  parseDocument ( doc );
  return true;
}
void resultTableViewModel::readCounts(QString &fileName)
{
    // check if data is already loaded
    if (dataLoaded) {
        return;
    }

    // the file and textstream
    QFile file;
    QTextStream in;
    file.setFileName(fileName);

    // check if file available (interrupt if not)
    if (!file.open(QIODevice::ReadOnly)) {
        return;
    }

    // set some stuff
    in.setDevice(&file);
    in.setCodec("UTF-8");

    // read the file
    QString rowName;
    QString line;
    QStringList fields;
    while ( !in.atEnd() ) {
        line = in.readLine();
        fields = line.split('\t');
        rowName = fields.takeFirst();
        rowNames.append(rowName);
        dataVec.append(fields);
    }
    if (rowNames.count() > 10) { dataLoaded = true; }

    // close and 'check' for error
    file.close();//! ADDED 2014
    if (file.error() != QFile::NoError) {return;}//! ADDED 2014
}
Ejemplo n.º 17
0
// We return the UserSettings here because we have to make changes to the
// configuration and the location of the file may change between releases.
UserSettingsPointer Upgrade::versionUpgrade(const QString& settingsPath) {

/*  Pre-1.7.0:
*
*   Since we didn't store version numbers in the config file prior to 1.7.0,
*   we check to see if the user is upgrading if his config files are in the old location,
*   since we moved them in 1.7.0. This code takes care of moving them.
*/

    QDir oldLocation = QDir(QDir::homePath());
#ifdef __WINDOWS__
    QFileInfo* pre170Config = new QFileInfo(oldLocation.filePath("mixxx.cfg"));
#else
    QFileInfo* pre170Config = new QFileInfo(oldLocation.filePath(".mixxx.cfg"));
#endif

    if (pre170Config->exists()) {

        // Move the files to their new location
        QDir newLocation = QDir(settingsPath);

        if (!newLocation.exists()) {
            qDebug() << "Creating new settings directory" << newLocation.absolutePath();
            newLocation.mkpath(".");
        }

        QString errorText = "Error moving your %1 file %2 to the new location %3: \n";

#ifdef __WINDOWS__
        QString oldFilePath = oldLocation.filePath("mixxxtrack.xml");
#else
        QString oldFilePath = oldLocation.filePath(".mixxxtrack.xml");
#endif

        QString newFilePath = newLocation.filePath("mixxxtrack.xml");
        QFile* oldFile = new QFile(oldFilePath);
        if (oldFile->exists()) {
            if (oldFile->copy(newFilePath)) {
                oldFile->remove();
            }
            else {
                if (oldFile->error()==14) qDebug() << errorText.arg("library", oldFilePath, newFilePath) << "The destination file already exists.";
                else qDebug() << errorText.arg("library", oldFilePath, newFilePath) << "Error #" << oldFile->error();
            }
        }
        delete oldFile;

#ifdef __WINDOWS__
        oldFilePath = oldLocation.filePath("mixxxbpmschemes.xml");
#else
        oldFilePath = oldLocation.filePath(".mixxxbpmscheme.xml");
#endif
        newFilePath = newLocation.filePath("mixxxbpmscheme.xml");
        oldFile = new QFile(oldFilePath);
        if (oldFile->exists()) {
            if (oldFile->copy(newFilePath))
                oldFile->remove();
            else {
                if (oldFile->error()==14) qDebug() << errorText.arg("settings", oldFilePath, newFilePath) << "The destination file already exists.";
                else qDebug() << errorText.arg("settings", oldFilePath, newFilePath) << "Error #" << oldFile->error();
            }
        }
        delete oldFile;
#ifdef __WINDOWS__
        oldFilePath = oldLocation.filePath("MixxxMIDIBindings.xml");
#else
        oldFilePath = oldLocation.filePath(".MixxxMIDIBindings.xml");
#endif
        newFilePath = newLocation.filePath("MixxxMIDIBindings.xml");
        oldFile = new QFile(oldFilePath);
        if (oldFile->exists()) {
            qWarning() << "The MIDI mapping file format has changed in this version of Mixxx. You will need to reconfigure your MIDI controller. See the Wiki for full details on the new format.";
            if (oldFile->copy(newFilePath))
                oldFile->remove();
            else {
                if (oldFile->error()==14) qDebug() << errorText.arg("MIDI mapping", oldFilePath, newFilePath) << "The destination file already exists.";
                else qDebug() << errorText.arg("MIDI mapping", oldFilePath, newFilePath) << "Error #" << oldFile->error();
            }
        }
        // Tidy up
        delete oldFile;
#ifdef __WINDOWS__
        QFile::remove(oldLocation.filePath("MixxxMIDIDevice.xml")); // Obsolete file, so just delete it
#else
        QFile::remove(oldLocation.filePath(".MixxxMIDIDevice.xml")); // Obsolete file, so just delete it
#endif

#ifdef __WINDOWS__
        oldFilePath = oldLocation.filePath("mixxx.cfg");
#else
        oldFilePath = oldLocation.filePath(".mixxx.cfg");
#endif
        newFilePath = newLocation.filePath(SETTINGS_FILE);
        oldFile = new QFile(oldFilePath);
        if (oldFile->copy(newFilePath))
            oldFile->remove();
        else {
                if (oldFile->error()==14) qDebug() << errorText.arg("configuration", oldFilePath, newFilePath) << "The destination file already exists.";
                else qDebug() << errorText.arg("configuration", oldFilePath, newFilePath) << "Error #" << oldFile->error();
            }
        delete oldFile;

    }
    // Tidy up
    delete pre170Config;
    // End pre-1.7.0 code


/***************************************************************************
*                           Post-1.7.0 upgrade code
*
*   Add entries to the IF ladder below if anything needs to change from the
*   previous to the current version. This allows for incremental upgrades
*   in case a user upgrades from a few versions prior.
****************************************************************************/

    // Read the config file from home directory
    UserSettingsPointer config(new ConfigObject<ConfigValue>(
        QDir(settingsPath).filePath(SETTINGS_FILE)));

    QString configVersion = config->getValueString(ConfigKey("[Config]","Version"));

    if (configVersion.isEmpty()) {

#ifdef __APPLE__
        qDebug() << "Config version is empty, trying to read pre-1.9.0 config";
        // Try to read the config from the pre-1.9.0 final directory on OS X (we moved it in 1.9.0 final)
        QScopedPointer<QFile> oldConfigFile(new QFile(QDir::homePath().append("/").append(".mixxx/mixxx.cfg")));
        if (oldConfigFile->exists() && ! CmdlineArgs::Instance().getSettingsPathSet()) {
            qDebug() << "Found pre-1.9.0 config for OS X";
            // Note: We changed SETTINGS_PATH in 1.9.0 final on OS X so it must be hardcoded to ".mixxx" here for legacy.
            config = UserSettingsPointer(new ConfigObject<ConfigValue>(
                QDir::homePath().append("/.mixxx/mixxx.cfg")));
            // Just to be sure all files like logs and soundconfig go with mixxx.cfg
            // TODO(XXX) Trailing slash not needed anymore as we switches from String::append
            // to QDir::filePath elsewhere in the code. This is candidate for removal.
            CmdlineArgs::Instance().setSettingsPath(QDir::homePath().append("/.mixxx/"));
            configVersion = config->getValueString(ConfigKey("[Config]","Version"));
        }
        else {
#elif __WINDOWS__
        qDebug() << "Config version is empty, trying to read pre-1.12.0 config";
        // Try to read the config from the pre-1.12.0 final directory on Windows (we moved it in 1.12.0 final)
        QScopedPointer<QFile> oldConfigFile(new QFile(QDir::homePath().append("/Local Settings/Application Data/Mixxx/mixxx.cfg")));
        if (oldConfigFile->exists() && ! CmdlineArgs::Instance().getSettingsPathSet()) {
            qDebug() << "Found pre-1.12.0 config for Windows";
            // Note: We changed SETTINGS_PATH in 1.12.0 final on Windows so it must be hardcoded to "Local Settings/Application Data/Mixxx/" here for legacy.
            config = UserSettingsPointer(new ConfigObject<ConfigValue>(
                QDir::homePath().append("/Local Settings/Application Data/Mixxx/mixxx.cfg")));
            // Just to be sure all files like logs and soundconfig go with mixxx.cfg
            // TODO(XXX) Trailing slash not needed anymore as we switches from String::append
            // to QDir::filePath elsewhere in the code. This is candidate for removal.
            CmdlineArgs::Instance().setSettingsPath(QDir::homePath().append("/Local Settings/Application Data/Mixxx/"));
            configVersion = config->getValueString(ConfigKey("[Config]","Version"));
        }
        else {
#endif
            // This must have been the first run... right? :)
            qDebug() << "No version number in configuration file. Setting to" << MIXXX_VERSION;
            config->set(ConfigKey("[Config]","Version"), ConfigValue(MIXXX_VERSION));
            m_bFirstRun = true;
            return config;
#ifdef __APPLE__
        }
#elif __WINDOWS__
        }
#endif
    }

    // If it's already current, stop here
    if (configVersion == MIXXX_VERSION) {
        qDebug() << "Configuration file is at the current version" << MIXXX_VERSION;
        return config;
    }

    // Allows for incremental upgrades in case someone upgrades from a few versions prior
    // (I wish we could do a switch on a QString.)
    /*
    // Examples, since we didn't store the version number prior to v1.7.0
    if (configVersion.startsWith("1.6.0")) {
        qDebug() << "Upgrading from v1.6.0 to 1.6.1...";
        // Upgrade tasks go here
        configVersion = "1.6.1";
        config->set(ConfigKey("[Config]","Version"), ConfigValue("1.6.1"));
    }
    if (configVersion.startsWith("1.6.1")) {
        qDebug() << "Upgrading from v1.6.1 to 1.7.0...";
        // Upgrade tasks go here
        configVersion = "1.7.0";
        config->set(ConfigKey("[Config]","Version"), ConfigValue("1.7.0"));
    }
    */

    // We use the following blocks to detect if this is the first time
    // you've run the latest version of Mixxx. This lets us show
    // the promo tracks stats agreement stuff for all users that are
    // upgrading Mixxx.

    if (configVersion.startsWith("1.7")) {
        qDebug() << "Upgrading from v1.7.x...";
        // Upgrade tasks go here
        // Nothing to change, really
        configVersion = "1.8.0";
        config->set(ConfigKey("[Config]","Version"), ConfigValue("1.8.0"));
    }

    if (configVersion.startsWith("1.8.0~beta1") ||
        configVersion.startsWith("1.8.0~beta2")) {
        qDebug() << "Upgrading from v1.8.0~beta...";
        // Upgrade tasks go here
        configVersion = "1.8.0";
        config->set(ConfigKey("[Config]","Version"), ConfigValue("1.8.0"));
    }
    if (configVersion.startsWith("1.8") || configVersion.startsWith("1.9.0beta1")) {
        qDebug() << "Upgrading from" << configVersion << "...";
        // Upgrade tasks go here
#ifdef __APPLE__
        QString OSXLocation180 = QDir::homePath().append("/").append(".mixxx");
        QString OSXLocation190 = settingsPath;
        QDir newOSXDir(OSXLocation190);
        newOSXDir.mkpath(OSXLocation190);

        QList<QPair<QString, QString> > dirsToMove;
        dirsToMove.push_back(QPair<QString, QString>(OSXLocation180, OSXLocation190));
        dirsToMove.push_back(QPair<QString, QString>(OSXLocation180 + "/midi", OSXLocation190 + "midi"));
        dirsToMove.push_back(QPair<QString, QString>(OSXLocation180 + "/presets", OSXLocation190 + "presets"));

        QListIterator<QPair<QString, QString> > dirIt(dirsToMove);
        QPair<QString, QString> curPair;
        while (dirIt.hasNext())
        {
            curPair = dirIt.next();
            qDebug() << "Moving" << curPair.first << "to" << curPair.second;
            QDir oldSubDir(curPair.first);
            QDir newSubDir(curPair.second);
            newSubDir.mkpath(curPair.second); // Create the new destination directory

            QStringList contents = oldSubDir.entryList(QDir::Files | QDir::NoDotAndDotDot);
            QStringListIterator it(contents);
            QString cur;
            // Iterate over all the files in the source directory and copy them to the dest dir.
            while (it.hasNext())
            {
                cur = it.next();
                QString src = curPair.first + "/" + cur;
                QString dest = curPair.second + "/" + cur;
                qDebug() << "Copying" << src << "to" << dest;
                if (!QFile::copy(src, dest))
                {
                    qDebug() << "Failed to move file during upgrade.";
                }
            }

            // Rename the old directory.
            newOSXDir.rename(OSXLocation180, OSXLocation180 + "-1.8");
        }
        // Reload the configuration file from the new location.
        // (We want to make sure we save to the new location...)
        config = UserSettingsPointer(new ConfigObject<ConfigValue>(
            QDir(settingsPath).filePath(SETTINGS_FILE)));
#endif
        configVersion = "1.9.0";
        config->set(ConfigKey("[Config]","Version"), ConfigValue("1.9.0"));
    }
    if (configVersion.startsWith("1.9") || configVersion.startsWith("1.10")) {
        qDebug() << "Upgrading from v1.9.x/1.10.x...";

        bool successful = true;

        qDebug() << "Copying midi/ to controllers/";
        QString midiPath = legacyUserPresetsPath(config);
        QString controllerPath = userPresetsPath(config);
        QDir oldDir(midiPath);
        QDir newDir(controllerPath);
        newDir.mkpath(controllerPath);  // create the new directory

        QStringList contents = oldDir.entryList(QDir::Files | QDir::NoDotAndDotDot);
        QStringListIterator it(contents);
        QString cur;
        // Iterate over all the files in the source directory and copy them to the dest dir.
        while (it.hasNext()) {
            cur = it.next();
            if (newDir.exists(cur)) {
                qDebug() << cur << "already exists in"
                         << controllerPath << "Skipping.";
                continue;
            }
            QString src = oldDir.absoluteFilePath(cur);
            QString dest = newDir.absoluteFilePath(cur);
            qDebug() << "Copying" << src << "to" << dest;
            if (!QFile::copy(src, dest)) {
                qDebug() << "Failed to copy file during upgrade.";
                successful = false;
            }
        }

        bool reanalyze_choice = askReanalyzeBeats();
        BeatDetectionSettings bpmSettings(config);
        bpmSettings.setReanalyzeWhenSettingsChange(reanalyze_choice);

        if (successful) {
            qDebug() << "Upgrade Successful";
            configVersion = "1.11.0";
            config->set(ConfigKey("[Config]","Version"),
                        ConfigValue(configVersion));
        } else {
            qDebug() << "Upgrade Failed";
        }
    }

    if (configVersion.startsWith("1.11")) {
        qDebug() << "Upgrading from v1.11.x...";
        bool successful = false;
        {
            MixxxDb mixxxDb(config);
            const mixxx::DbConnectionPooler dbConnectionPooler(
                    mixxxDb.connectionPool());
            if (dbConnectionPooler.isPooling()) {
                QSqlDatabase dbConnection = mixxx::DbConnectionPooled(mixxxDb.connectionPool());
                DEBUG_ASSERT(dbConnection.isOpen());
                if (MixxxDb::initDatabaseSchema(dbConnection)) {
                    TrackCollection tc(config);
                    tc.connectDatabase(dbConnection);

                    // upgrade to the multi library folder settings
                    QString currentFolder = config->getValueString(PREF_LEGACY_LIBRARY_DIR);
                    // to migrate the DB just add the current directory to the new
                    // directories table
                    // NOTE(rryan): We don't have to ask for sandbox permission to this
                    // directory because the normal startup integrity check in Library will
                    // notice if we don't have permission and ask for access. Also, the
                    // Sandbox isn't setup yet at this point in startup because it relies on
                    // the config settings path and this function is what loads the config
                    // so it's not ready yet.
                    successful = tc.getDirectoryDAO().addDirectory(currentFolder);

                    tc.disconnectDatabase();
                }
            }
        }

        // ask for library rescan to activate cover art. We can later ask for
        // this variable when the library scanner is constructed.
        m_bRescanLibrary = askReScanLibrary();

        // Versions of mixxx until 1.11 had a hack that multiplied gain by 1/2,
        // which was compensation for another hack that set replaygain to a
        // default of 6.  We've now removed all of the hacks, so subtracting
        // 6 from everyone's replay gain should keep things consistent for
        // all users.
        int oldReplayGain = config->getValue(
                ConfigKey("[ReplayGain]", "InitialReplayGainBoost"), 6);
        int newReplayGain = math_max(-6, oldReplayGain - 6);
        config->set(ConfigKey("[ReplayGain]", "InitialReplayGainBoost"),
                    ConfigValue(newReplayGain));

        // if everything until here worked fine we can mark the configuration as
        // updated
        if (successful) {
            configVersion = MIXXX_VERSION;
            config->set(ConfigKey("[Config]","Version"), ConfigValue(MIXXX_VERSION));
        }
        else {
            qDebug() << "Upgrade failed!\n";
        }
    }

    if (configVersion.startsWith("1.12") ||
        configVersion.startsWith("2.0") ||
        configVersion.startsWith("2.1.0")) {
        // No special upgrade required, just update the value.
        configVersion = MIXXX_VERSION;
        config->set(ConfigKey("[Config]","Version"), ConfigValue(MIXXX_VERSION));
    }

    if (configVersion == MIXXX_VERSION) qDebug() << "Configuration file is now at the current version" << MIXXX_VERSION;
    else {
        qWarning() << "Configuration file is at version" << configVersion
                   << "instead of the current" << MIXXX_VERSION;
    }

    return config;
}
Ejemplo n.º 18
0
void SMBSlave::smbCopyPut(const QUrl& ksrc, const QUrl& kdst, int permissions, KIO::JobFlags flags)
{
    qCDebug(KIO_SMB) << "src = " << ksrc << ", dest = " << kdst;

    QFile srcFile (ksrc.toLocalFile());
    const QFileInfo srcInfo (srcFile);

    if (srcInfo.exists()) {
        if (srcInfo.isDir()) {
            error(KIO::ERR_IS_DIRECTORY, ksrc.toDisplayString());
            return;
        }
    } else {
        error(KIO::ERR_DOES_NOT_EXIST, ksrc.toDisplayString());
        return;
    }

    if (!srcFile.open(QFile::ReadOnly)) {
        qCDebug(KIO_SMB) << "could not read from" << ksrc;
        switch (srcFile.error()) {
          case QFile::PermissionsError:
              error(KIO::ERR_WRITE_ACCESS_DENIED, ksrc.toDisplayString());
              break;
          case QFile::OpenError:
          default:
              error(KIO::ERR_CANNOT_OPEN_FOR_READING, ksrc.toDisplayString());
              break;
        }
        return;
    }

    totalSize(static_cast<filesize_t>(srcInfo.size()));

    bool bResume = false;
    bool bPartExists = false;
    const bool bMarkPartial = config()->readEntry("MarkPartial", true);
    const SMBUrl dstOrigUrl (kdst);

    if (bMarkPartial) {
        const int errNum = cache_stat(dstOrigUrl.partUrl(), &st);
        bPartExists = (errNum == 0);
        if (bPartExists) {
            if (!(flags & KIO::Overwrite) && !(flags & KIO::Resume)) {
                bResume = canResume(st.st_size);
            } else {
                bResume = (flags & KIO::Resume);
            }
        }
    }

    int dstfd = -1;
    int errNum = cache_stat(dstOrigUrl, &st);

    if (errNum == 0 && !(flags & KIO::Overwrite) && !(flags & KIO::Resume)) {
        if (S_ISDIR(st.st_mode)) {
            error( KIO::ERR_IS_DIRECTORY, dstOrigUrl.toDisplayString());
        } else {
            error( KIO::ERR_FILE_ALREADY_EXIST, dstOrigUrl.toDisplayString());
        }
        return;
    }

    KIO::filesize_t processed_size = 0;
    const SMBUrl dstUrl(bMarkPartial ? dstOrigUrl.partUrl() : dstOrigUrl);

    if (bResume) {
        // append if resuming
        qCDebug(KIO_SMB) << "resume" << dstUrl;
        dstfd = smbc_open(dstUrl.toSmbcUrl(), O_RDWR, 0 );
        if (dstfd < 0) {
            errNum = errno;
        } else {
            const off_t offset = smbc_lseek(dstfd, 0, SEEK_END);
            if (offset == (off_t)-1) {
                error(KIO::ERR_COULD_NOT_SEEK, dstUrl.toDisplayString());
                smbc_close(dstfd);
                return;
            } else {
                processed_size = offset;
            }
        }
    } else {
        mode_t mode;
        if (permissions == -1) {
            mode = 600;
        } else {
            mode = permissions | S_IRUSR | S_IWUSR;
        }

        qCDebug(KIO_SMB) << "NO resume" << dstUrl;
        dstfd = smbc_open(dstUrl.toSmbcUrl(), O_CREAT | O_TRUNC | O_WRONLY, mode);
        if (dstfd < 0) {
            errNum = errno;
        }
    }

    if (dstfd < 0) {
        if (errNum == EACCES) {
            qCDebug(KIO_SMB) << "access denied";
            error( KIO::ERR_WRITE_ACCESS_DENIED, dstUrl.toDisplayString());
        }
        else {
            qCDebug(KIO_SMB) << "can not open for writing";
            error( KIO::ERR_CANNOT_OPEN_FOR_WRITING, dstUrl.toDisplayString());
        }
        return;
    }

    bool isErr = false;

    if (processed_size == 0 || srcFile.seek(processed_size)) {
        // Perform the copy
        char buf[MAX_XFER_BUF_SIZE];

        while (1) {
            const ssize_t bytesRead = srcFile.read(buf, MAX_XFER_BUF_SIZE);
            if (bytesRead <= 0) {
                if (bytesRead < 0) {
                    error(KIO::ERR_COULD_NOT_READ, ksrc.toDisplayString());
                    isErr = true;
                }
                break;
            }

            const qint64 bytesWritten = smbc_write(dstfd, buf, bytesRead);
            if (bytesWritten == -1) {
                error(KIO::ERR_COULD_NOT_WRITE, kdst.toDisplayString());
                isErr = true;
                break;
            }

            processed_size += bytesWritten;
            processedSize(processed_size);
        }
    } else {
        isErr = true;
        error(KIO::ERR_COULD_NOT_SEEK, ksrc.toDisplayString());
    }

    // FINISHED
    if (smbc_close(dstfd) < 0) {
        qCDebug(KIO_SMB) << dstUrl << "could not write";
        error( KIO::ERR_COULD_NOT_WRITE, dstUrl.toDisplayString());
        return;
    }

    // Handle error condition.
    if (isErr) {
        if (bMarkPartial) {
            const int size = config()->readEntry("MinimumKeepSize", DEFAULT_MINIMUM_KEEP_SIZE);
            const int errNum = cache_stat(dstUrl, &st);
            if (errNum == 0 && st.st_size < size) {
                smbc_unlink(dstUrl.toSmbcUrl());
            }
        }
        return;
    }

    // Rename partial file to its original name.
    if (bMarkPartial) {
        smbc_unlink(dstOrigUrl.toSmbcUrl());
        if (smbc_rename(dstUrl.toSmbcUrl(), dstOrigUrl.toSmbcUrl()) < 0) {
            qCDebug(KIO_SMB) << "failed to rename" << dstUrl << "to" << dstOrigUrl << "->" << strerror(errno);
            error(ERR_CANNOT_RENAME_PARTIAL, dstUrl.toDisplayString());
            return;
        }
    }

#ifdef HAVE_UTIME_H
    // set modification time
    const QString mtimeStr = metaData( "modified" );
    if (!mtimeStr.isEmpty() ) {
        QDateTime dt = QDateTime::fromString( mtimeStr, Qt::ISODate );
        if ( dt.isValid() ) {
            struct utimbuf utbuf;
            utbuf.actime = st.st_atime; // access time, unchanged
            utbuf.modtime = dt.toTime_t(); // modification time
            smbc_utime( dstUrl.toSmbcUrl(), &utbuf );
        }
    }
#endif

    // We have done our job => finish
    finished();
}
Ejemplo n.º 19
0
void SMBSlave::smbCopyGet(const QUrl& ksrc, const QUrl& kdst, int permissions, KIO::JobFlags flags)
{
    qCDebug(KIO_SMB) << "src = " << ksrc << ", dest = " << kdst;

    // check if destination is ok ...
    const QString dstFile = kdst.toLocalFile();
    const QFileInfo dstInfo (dstFile);

    if(dstInfo.exists())  {
        if(dstInfo.isDir()) {
            error (ERR_IS_DIRECTORY, kdst.toDisplayString());
            return;
        }

        if(!(flags & KIO::Overwrite)) {
            error(ERR_FILE_ALREADY_EXIST, kdst.toDisplayString());
            return;
        }
    }

    bool bResume = false;
    const QFileInfo partInfo (dstFile + QLatin1String(".part"));
    const bool bPartExists = partInfo.exists();
    const bool bMarkPartial = config()->readEntry("MarkPartial", true);

    if (bMarkPartial && bPartExists && partInfo.size() > 0) {
      if (partInfo.isDir()) {
        error(ERR_IS_DIRECTORY, partInfo.absoluteFilePath());
        return;
      }
      bResume = canResume(partInfo.size());
    }

    if (bPartExists && !bResume)                  // get rid of an unwanted ".part" file
      QFile::remove(partInfo.absoluteFilePath());

    // open the output file...
    QFile::OpenMode mode;
    QString filename;
    if (bResume) {
        filename = partInfo.absoluteFilePath();
        mode = QFile::WriteOnly | QFile::Append;
    }
    else {
        filename = (bMarkPartial ? partInfo.absoluteFilePath() : dstFile);
        mode = QFile::WriteOnly | QFile::Truncate;
    }

    QFile file (filename);
    if (!bResume) {
        QFile::Permissions perms;
        if (permissions == -1) {
            perms = QFile::ReadOwner | QFile::WriteOwner;
        } else {
            perms = KIO::convertPermissions(permissions | QFile::WriteOwner);
        }
        file.setPermissions(perms);
    }

    if (!file.open(mode)) {
        qCDebug(KIO_SMB) << "could not write to" << dstFile;
        switch (file.error()) {
          case QFile::OpenError:
              if (bResume) {
                error (ERR_CANNOT_RESUME, kdst.toDisplayString());
              } else {
                error(ERR_CANNOT_OPEN_FOR_WRITING, kdst.toDisplayString());
              }
              break;
          case QFile::PermissionsError:
              error(ERR_WRITE_ACCESS_DENIED, kdst.toDisplayString());
              break;
          default:
              error(ERR_CANNOT_OPEN_FOR_WRITING, kdst.toDisplayString());
              break;
        }
        return;
    }

    // setup the source urls
    const SMBUrl src(ksrc);

    // Obtain information about source
    int errNum = cache_stat (src, &st);
    if (errNum != 0) {
        if (errNum == EACCES) {
            error (KIO::ERR_ACCESS_DENIED, src.toDisplayString());
        } else {
            error (KIO::ERR_DOES_NOT_EXIST, src.toDisplayString());
        }
        return;
    }

    if (S_ISDIR( st.st_mode )) {
        error (KIO::ERR_IS_DIRECTORY, src.toDisplayString());
        return;
    }
    totalSize(st.st_size);

    // Open the source file
    KIO::filesize_t processed_size = 0;
    int srcfd = smbc_open(src.toSmbcUrl(), O_RDONLY, 0);
    if (srcfd < 0){
        errNum = errno;
    } else {
        errNum = 0;
        if (bResume) {
            qCDebug(KIO_SMB) << "seeking to size" << partInfo.size();
            off_t offset = smbc_lseek(srcfd, partInfo.size(), SEEK_SET);
            if (offset == -1) {
                error(KIO::ERR_COULD_NOT_SEEK, src.toDisplayString());
                smbc_close(srcfd);
                return;
            } else {
                processed_size += offset;
            }
        }
    }

    if (srcfd < 0) {
        if(errNum == EACCES) {
            error( KIO::ERR_ACCESS_DENIED, src.toDisplayString() );
        } else {
            error( KIO::ERR_DOES_NOT_EXIST, src.toDisplayString() );
        }
        return;
    }

    // Perform the copy
    char buf[MAX_XFER_BUF_SIZE];
    bool isErr = false;

    while (1) {
        const ssize_t bytesRead = smbc_read(srcfd, buf, MAX_XFER_BUF_SIZE);
        if (bytesRead <= 0) {
            if (bytesRead < 0) {
                error( KIO::ERR_COULD_NOT_READ, src.toDisplayString());
                isErr = true;
            }
            break;
        }

        const qint64 bytesWritten = file.write(buf, bytesRead);
        if (bytesWritten == -1) {
            qCDebug(KIO_SMB) << "copy now KIO::ERR_COULD_NOT_WRITE";
            error( KIO::ERR_COULD_NOT_WRITE, kdst.toDisplayString());
            isErr = true;
            break;
        }

        processed_size += bytesWritten;
        processedSize(processed_size);
    }

    // FINISHED
    smbc_close(srcfd);

    // Handle error condition.
    if (isErr) {
        const QString sPart = partInfo.absoluteFilePath();
        if (bMarkPartial) {
            const int size = config()->readEntry("MinimumKeepSize", DEFAULT_MINIMUM_KEEP_SIZE);
            if (partInfo.size() <  size) {
                QFile::remove(sPart);
            }
        }
        return;
    }

    // Rename partial file to its original name.
    if (bMarkPartial) {
        const QString sPart = partInfo.absoluteFilePath();
        // Remove old dest file if it exists..
        if (dstInfo.exists()) {
            QFile::remove(dstFile);
        }
        if (!QFile::rename(sPart, dstFile)) {
            qCDebug(KIO_SMB) << "failed to rename" << sPart << "to" << dstFile;
            error(ERR_CANNOT_RENAME_PARTIAL, sPart);
            return;
        }
    }

    // Restore the mtime on the file.
    const QString mtimeStr = metaData("modified");
    qCDebug(KIO_SMB) << "modified:" << mtimeStr;
    if (!mtimeStr.isEmpty()) {
        QDateTime dt = QDateTime::fromString(mtimeStr, Qt::ISODate);
        if (dt.isValid()) {
            struct utimbuf utbuf;
            utbuf.actime = QFileInfo(file).lastRead().toTime_t(); // access time, unchanged
            utbuf.modtime = dt.toTime_t(); // modification time
            utime(QFile::encodeName(dstFile).constData(), &utbuf);
        }
    }

    finished();
}
Ejemplo n.º 20
0
// We return the ConfigObject here because we have to make changes to the
// configuration and the location of the file may change between releases.
ConfigObject<ConfigValue>* Upgrade::versionUpgrade(const QString& settingsPath) {

/*  Pre-1.7.0:
*
*   Since we didn't store version numbers in the config file prior to 1.7.0,
*   we check to see if the user is upgrading if his config files are in the old location,
*   since we moved them in 1.7.0. This code takes care of moving them.
*/

    QString oldLocation = QDir::homePath().append("/%1");
#ifdef __WINDOWS__
    QFileInfo* pre170Config = new QFileInfo(oldLocation.arg("mixxx.cfg"));
#else
    QFileInfo* pre170Config = new QFileInfo(oldLocation.arg(".mixxx.cfg"));
#endif

    if (pre170Config->exists()) {

        // Move the files to their new location
        QString newLocation = settingsPath;

        if (!QDir(newLocation).exists()) {
            qDebug() << "Creating new settings directory" << newLocation;
            QDir().mkpath(newLocation);
        }

        newLocation.append("%1");
        QString errorText = "Error moving your %1 file %2 to the new location %3: \n";

#ifdef __WINDOWS__
        QString oldFilePath = oldLocation.arg("mixxxtrack.xml");
#else
        QString oldFilePath = oldLocation.arg(".mixxxtrack.xml");
#endif

        QString newFilePath = newLocation.arg("mixxxtrack.xml");
        QFile* oldFile = new QFile(oldFilePath);
        if (oldFile->exists()) {
            if (oldFile->copy(newFilePath)) {
                oldFile->remove();
                m_bUpgraded = true;
            }
            else {
                if (oldFile->error()==14) qDebug() << errorText.arg("library", oldFilePath, newFilePath) << "The destination file already exists.";
                else qDebug() << errorText.arg("library", oldFilePath, newFilePath) << "Error #" << oldFile->error();
            }
        }
        delete oldFile;

#ifdef __WINDOWS__
        oldFilePath = oldLocation.arg("mixxxbpmschemes.xml");
#else
        oldFilePath = oldLocation.arg(".mixxxbpmscheme.xml");
#endif
        newFilePath = newLocation.arg("mixxxbpmscheme.xml");
        oldFile = new QFile(oldFilePath);
        if (oldFile->exists()) {
            if (oldFile->copy(newFilePath))
                oldFile->remove();
            else {
                if (oldFile->error()==14) qDebug() << errorText.arg("settings", oldFilePath, newFilePath) << "The destination file already exists.";
                else qDebug() << errorText.arg("settings", oldFilePath, newFilePath) << "Error #" << oldFile->error();
            }
        }
        delete oldFile;
#ifdef __WINDOWS__
        oldFilePath = oldLocation.arg("MixxxMIDIBindings.xml");
#else
        oldFilePath = oldLocation.arg(".MixxxMIDIBindings.xml");
#endif
        newFilePath = newLocation.arg("MixxxMIDIBindings.xml");
        oldFile = new QFile(oldFilePath);
        if (oldFile->exists()) {
            qWarning() << "The MIDI mapping file format has changed in this version of Mixxx. You will need to reconfigure your MIDI controller. See the Wiki for full details on the new format.";
            if (oldFile->copy(newFilePath))
                oldFile->remove();
            else {
                if (oldFile->error()==14) qDebug() << errorText.arg("MIDI mapping", oldFilePath, newFilePath) << "The destination file already exists.";
                else qDebug() << errorText.arg("MIDI mapping", oldFilePath, newFilePath) << "Error #" << oldFile->error();
            }
        }
        // Tidy up
        delete oldFile;

        QFile::remove(oldLocation.arg(".MixxxMIDIDevice.xml")); // Obsolete file, so just delete it

#ifdef __WINDOWS__
        oldFilePath = oldLocation.arg("mixxx.cfg");
#else
        oldFilePath = oldLocation.arg(".mixxx.cfg");
#endif
        newFilePath = newLocation.arg(SETTINGS_FILE);
        oldFile = new QFile(oldFilePath);
        if (oldFile->copy(newFilePath))
            oldFile->remove();
        else {
                if (oldFile->error()==14) qDebug() << errorText.arg("configuration", oldFilePath, newFilePath) << "The destination file already exists.";
                else qDebug() << errorText.arg("configuration", oldFilePath, newFilePath) << "Error #" << oldFile->error();
            }
        delete oldFile;

    }
    // Tidy up
    delete pre170Config;
    // End pre-1.7.0 code


/***************************************************************************
*                           Post-1.7.0 upgrade code
*
*   Add entries to the IF ladder below if anything needs to change from the
*   previous to the current version. This allows for incremental upgrades
*   incase a user upgrades from a few versions prior.
****************************************************************************/

    // Read the config file from home directory
    ConfigObject<ConfigValue> *config = new ConfigObject<ConfigValue>(settingsPath + SETTINGS_FILE);

    QString configVersion = config->getValueString(ConfigKey("[Config]","Version"));

    if (configVersion.isEmpty()) {

#ifdef __APPLE__
        qDebug() << "Config version is empty, trying to read pre-1.9.0 config";
        //Try to read the config from the pre-1.9.0 final directory on OS X (we moved it in 1.9.0 final)
        QFile* oldFile = new QFile(QDir::homePath().append("/").append(".mixxx/mixxx.cfg"));
        if (oldFile->exists()) {
            qDebug() << "Found pre-1.9.0 config for OS X";
            config = new ConfigObject<ConfigValue>(QDir::homePath().append("/").append(".mixxx/mixxx.cfg"));
            //Note: We changed SETTINGS_PATH in 1.9.0 final on OS X so it must be hardcoded to ".mixxx" here for legacy.
            configVersion = config->getValueString(ConfigKey("[Config]","Version"));
            delete oldFile;
        }
        else {
#endif
            //This must have been the first run... right? :)
            qDebug() << "No version number in configuration file. Setting to" << VERSION;
            config->set(ConfigKey("[Config]","Version"), ConfigValue(VERSION));
            m_bFirstRun = true;
            return config;
#ifdef __APPLE__
        }
#endif
    }

    // If it's already current, stop here
    if (configVersion == VERSION) {
        qDebug() << "Configuration file is at the current version" << VERSION;
        return config;
    }

    // Allows for incremental upgrades incase someone upgrades from a few versions prior
    // (I wish we could do a switch on a QString.)
    /*
    // Examples, since we didn't store the version number prior to v1.7.0
    if (configVersion.startsWith("1.6.0")) {
        qDebug() << "Upgrading from v1.6.0 to 1.6.1...";
        // Upgrade tasks go here
        configVersion = "1.6.1";
        config->set(ConfigKey("[Config]","Version"), ConfigValue("1.6.1"));
    }
    if (configVersion.startsWith("1.6.1")) {
        qDebug() << "Upgrading from v1.6.1 to 1.7.0...";
        // Upgrade tasks go here
        configVersion = "1.7.0";
        config->set(ConfigKey("[Config]","Version"), ConfigValue("1.7.0"));
    }
    */

    //We use the following blocks to detect if this is the first time
    //you've run the latest version of Mixxx. This lets us show
    //the promo tracks stats agreement stuff for all users that are
    //upgrading Mixxx.

    if (configVersion.startsWith("1.7")) {
        qDebug() << "Upgrading from v1.7.x...";
        // Upgrade tasks go here
        // Nothing to change, really
        configVersion = "1.8.0";
        config->set(ConfigKey("[Config]","Version"), ConfigValue("1.8.0"));
    }

    if (configVersion.startsWith("1.8.0~beta1") ||
        configVersion.startsWith("1.8.0~beta2")) {
        qDebug() << "Upgrading from v1.8.0~beta...";
        // Upgrade tasks go here
        configVersion = "1.8.0";
        config->set(ConfigKey("[Config]","Version"), ConfigValue("1.8.0"));
    }
    if (configVersion.startsWith("1.8") || configVersion.startsWith("1.9.0beta1")) {
        qDebug() << "Upgrading from" << configVersion << "...";
        // Upgrade tasks go here
#ifdef __APPLE__
        QString OSXLocation180 = QDir::homePath().append("/").append(".mixxx");
        QString OSXLocation190 = settingsPath;
        QDir newOSXDir(OSXLocation190);
        newOSXDir.mkpath(OSXLocation190);

        QList<QPair<QString, QString> > dirsToMove;
        dirsToMove.push_back(QPair<QString, QString>(OSXLocation180, OSXLocation190));
        dirsToMove.push_back(QPair<QString, QString>(OSXLocation180 + "/midi", OSXLocation190 + "midi"));
        dirsToMove.push_back(QPair<QString, QString>(OSXLocation180 + "/presets", OSXLocation190 + "presets"));

        QListIterator<QPair<QString, QString> > dirIt(dirsToMove);
        QPair<QString, QString> curPair;
        while (dirIt.hasNext())
        {
            curPair = dirIt.next();
            qDebug() << "Moving" << curPair.first << "to" << curPair.second;
            QDir oldSubDir(curPair.first);
            QDir newSubDir(curPair.second);
            newSubDir.mkpath(curPair.second); //Create the new destination directory

            QStringList contents = oldSubDir.entryList(QDir::Files | QDir::NoDotAndDotDot);
            QStringListIterator it(contents);
            QString cur;
            //Iterate over all the files in the source directory and copy them to the dest dir.
            while (it.hasNext())
            {
                cur = it.next();
                QString src = curPair.first + "/" + cur;
                QString dest = curPair.second + "/" + cur;
                qDebug() << "Copying" << src << "to" << dest;
                if (!QFile::copy(src, dest))
                {
                    qDebug() << "Failed to move file during upgrade.";
                }
            }

            //Rename the old directory.
            newOSXDir.rename(OSXLocation180, OSXLocation180 + "-1.8");
        }
        //Reload the configuration file from the new location.
        //(We want to make sure we save to the new location...)
        config = new ConfigObject<ConfigValue>(settingsPath + SETTINGS_FILE);
#endif
        configVersion = "1.9.0";
        config->set(ConfigKey("[Config]","Version"), ConfigValue("1.9.0"));
    }
    if (configVersion.startsWith("1.9") || configVersion.startsWith("1.10")) {
        qDebug() << "Upgrading from v1.9.x/1.10.x...";

        bool successful = true;

        qDebug() << "Copying midi/ to controllers/";
        QString midiPath = legacyUserPresetsPath(config);
        QString controllerPath = userPresetsPath(config);
        QDir oldDir(midiPath);
        QDir newDir(controllerPath);
        newDir.mkpath(controllerPath);  // create the new directory

        QStringList contents = oldDir.entryList(QDir::Files | QDir::NoDotAndDotDot);
        QStringListIterator it(contents);
        QString cur;
        //Iterate over all the files in the source directory and copy them to the dest dir.
        while (it.hasNext()) {
            cur = it.next();
            if (newDir.exists(cur)) {
                qDebug() << cur << "already exists in"
                         << controllerPath << "Skipping.";
                continue;
            }
            QString src = oldDir.absoluteFilePath(cur);
            QString dest = newDir.absoluteFilePath(cur);
            qDebug() << "Copying" << src << "to" << dest;
            if (!QFile::copy(src, dest)) {
                qDebug() << "Failed to copy file during upgrade.";
                successful = false;
            }
        }

        bool reanalyze_choice = askReanalyzeBeats();
        config->set(ConfigKey(BPM_CONFIG_KEY,
                              BPM_REANALYZE_WHEN_SETTINGS_CHANGE),
                    ConfigValue(reanalyze_choice));

        if (successful) {
            qDebug() << "Upgrade Successful";
            configVersion = "1.11.0";
            m_bUpgraded = true;
            config->set(ConfigKey("[Config]","Version"),
                        ConfigValue(configVersion));
        } else {
            qDebug() << "Upgrade Failed";
        }
    }

    if (configVersion.startsWith("1.11")) {
        qDebug() << "Upgrading from v1.11.x...";

        // upgrade to the multi library folder settings
        QString currentFolder = config->getValueString(PREF_LEGACY_LIBRARY_DIR);
        // to migrate the DB just add the current directory to the new
        // directories table
        TrackCollection tc(config);
        DirectoryDAO directoryDAO = tc.getDirectoryDAO();

        // NOTE(rryan): We don't have to ask for sandbox permission to this
        // directory because the normal startup integrity check in Library will
        // notice if we don't have permission and ask for access. Also, the
        // Sandbox isn't setup yet at this point in startup because it relies on
        // the config settings path and this function is what loads the config
        // so it's not ready yet.
        bool successful = directoryDAO.addDirectory(currentFolder);

        // ask for library rescan to activate cover art. We can later ask for
        // this variable when the library scanner is constructed.
        m_bRescanLibrary = askReScanLibrary();

        // if everything until here worked fine we can mark the configuration as
        // updated
        if (successful) {
            configVersion = VERSION;
            m_bUpgraded = true;
            config->set(ConfigKey("[Config]","Version"), ConfigValue(VERSION));
        }
        else {
            qDebug() << "Upgrade failed!\n";
        }
    }

    if (configVersion == VERSION) qDebug() << "Configuration file is now at the current version" << VERSION;
    else {
        /* Way too verbose, this confuses the hell out of Linux users when they see this:
        qWarning() << "Configuration file is at version" << configVersion
                   << "and I don't know how to upgrade it to the current" << VERSION
                   << "\n   (That means a function to do this needs to be added to upgrade.cpp.)"
                   << "\n-> Leaving the configuration file version as-is.";
        */
        qWarning() << "Configuration file is at version" << configVersion
                   << "instead of the current" << VERSION;
    }

    return config;
}
Ejemplo n.º 21
0
bool QmitkPythonSnippets::LoadStringMap( const QString& filename, QmitkPythonSnippets::QStringMap& oldMap )
{
  MITK_DEBUG("QmitkPythonSnippets") << "loading from xml file " << filename.toStdString();
  QStringMap map;

  QXmlStreamReader xmlReader;
  QFile file;
  QByteArray data;
  // resource file
  if( filename.startsWith(":") )
  {
    QResource res( filename );
    data = QByteArray( reinterpret_cast< const char* >( res.data() ), res.size() );
    xmlReader.addData( data );
  }
  else
  {
    file.setFileName( filename );
    if (!file.open(QFile::ReadOnly | QFile::Text))
    {
        MITK_ERROR << "Error: Cannot read file " << qPrintable(filename)
         << ": " << qPrintable(file.errorString());
        return false;
    }
    xmlReader.setDevice(&file);
  }

  xmlReader.readNext();

  while(!xmlReader.atEnd())
  {
    xmlReader.readNext();

    if(xmlReader.name() == SNIPPETS_XML_ELEMENT_NAME)
    {
      QXmlStreamAttributes attributes = xmlReader.attributes();
      QString key;
      QString value;
      if(attributes.hasAttribute("key"))
      {
        key = attributes.value("key").toString();
      }

      if(attributes.hasAttribute("value"))
      {
        value = attributes.value("value").toString();
      }

      if( !key.isEmpty() )
      {
        MITK_DEBUG("QmitkPythonSnippets") << "loaded snippet " << key.toStdString();
        MITK_DEBUG("QmitkPythonSnippets") << "value " << value.toStdString();
        map[key] = value;
      }
    }
  }

  if (xmlReader.hasError())
  {
    MITK_ERROR << "Error: Failed to parse file "
      << qPrintable(filename) << ": "
      << qPrintable(xmlReader.errorString());
    return false;
  }
  else if (file.error() != QFile::NoError)
  {
    MITK_ERROR << "Error: Cannot read file " << qPrintable(filename)
      << ": " << qPrintable(file.errorString());
    return false;
  }

  if( file.isOpen() )
    file.close();

  oldMap = map;
  return true;
}
Ejemplo n.º 22
0
TrainingSetFile::TSFResult TrainingSetFile::fromFile(QFile &file)
{
	QString
			version,
			text;

	QStringRef name;

	QXmlStreamReader tsReadXML;

	QXmlStreamReader::TokenType tt;
	QStringList textElements;
	QXmlStreamAttributes attributes;

	TrainingSetFile *retTSF = new TrainingSetFile();
	TSFResult res = {retTSF, true, NoError, "", 0};

	TrainingSet *ts = retTSF->getTrainingSet();

	int
			lastPatternIndex = 0,
			sTextElements,
			pSize = 0,
			iSize = 0,
			tSize = 0;

	Normalization
			*inor = new Normalization(),
			*tnor = new Normalization();

	vector<vector<double> >
			inputs,
			targets;

	DataRepresentation
			*idr = ts->getInputsDataRepresentation(),
			*tdr = ts->getTargetsDataRepresentation();

	if(file.open(QIODevice::ReadOnly)){
		tsReadXML.setDevice(&file);
		while (!tsReadXML.atEnd()) {
			tt = tsReadXML.readNext();

			if(tsReadXML.hasError()){
				file.close();
				return {retTSF, false, toTSFError(tsReadXML.error()), tsReadXML.errorString(), tsReadXML.lineNumber()};
			}

			if(tt == QXmlStreamReader::StartDocument){
				continue;
			}else if(tt == QXmlStreamReader::StartElement){
				name = tsReadXML.name();
				if(name == STR_TRAININGSET){
					attributes = tsReadXML.attributes();
					if(attributes.hasAttribute(STR_PATTERNSIZE) &&
					   attributes.hasAttribute(STR_INPUTSSIZE) &&
					   attributes.hasAttribute(STR_TARGETSSIZE))
					{
						pSize = attributes.value(STR_PATTERNSIZE).toInt();
						iSize = attributes.value(STR_INPUTSSIZE).toInt();
						tSize = attributes.value(STR_TARGETSSIZE).toInt();

						inputs = vector<vector<double> >(pSize, vector<double>(iSize, 0));
						targets = vector<vector<double> >(pSize, vector<double>(tSize, 0));
					}else{
						file.close();
						return {
							retTSF, false, NotWellFormedError, "NotWellFormedError: Missing attributes (" + STR_PATTERNSIZE + ", " + STR_INPUTSSIZE + ", " + STR_TARGETSSIZE + ") on tag " + STR_TRAININGSET, tsReadXML.lineNumber()
						};
					}
				}else if(name == STR_PROPERTIES){
					attributes = tsReadXML.attributes();
					if(attributes.hasAttribute(STR_VERSION)){
						version = attributes.value(STR_VERSION).toString();
					}else{
						file.close();
						return
						{
							retTSF, false, NotWellFormedError, "NotWellFormedError: Missing attributes (" + STR_VERSION + ") on tag " + STR_PROPERTIES, tsReadXML.lineNumber()
						};
					}
				}else if(name == STR_INPUTSDATAREPRESENTATION){
					attributes = tsReadXML.attributes();
					if(attributes.hasAttribute(STR_NAME) &&
					   attributes.hasAttribute(STR_WIDTH) &&
					   attributes.hasAttribute(STR_HEIGHT) &&
					   attributes.hasAttribute(STR_FORMAT))
					{
						idr->setType(drFromStrToInt(attributes.value(STR_NAME).toString()));
						idr->setWidth(attributes.value(STR_WIDTH).toInt());
						idr->setHeight(attributes.value(STR_HEIGHT).toInt());
						idr->setImageFormat(fromStrToImgFormat(attributes.value(STR_FORMAT).toString()));
					}else{
						file.close();
						return
						{
							retTSF, false, NotWellFormedError, "NotWellFormedError: Missing attributes (" + STR_NAME + ", " + STR_WIDTH + ", " + STR_HEIGHT + ", " + STR_FORMAT + ") on tag " + STR_INPUTSDATAREPRESENTATION, tsReadXML.lineNumber()
						};
					}
				}else if(name == STR_TARGETSDATAREPRESENTATION){
					attributes = tsReadXML.attributes();
					if(attributes.hasAttribute(STR_NAME) &&
					   attributes.hasAttribute(STR_WIDTH) &&
					   attributes.hasAttribute(STR_HEIGHT) &&
					   attributes.hasAttribute(STR_FORMAT))
					{
						tdr->setType(drFromStrToInt(attributes.value(STR_NAME).toString()));
						tdr->setWidth(attributes.value(STR_WIDTH).toInt());
						tdr->setHeight(attributes.value(STR_HEIGHT).toInt());
						tdr->setImageFormat(fromStrToImgFormat(attributes.value(STR_FORMAT).toString()));
					}else{
						file.close();
						return
						{
							retTSF, false, NotWellFormedError, "NotWellFormedError: Missing attributes (" + STR_NAME + ", " + STR_WIDTH + ", " + STR_HEIGHT + ", " + STR_FORMAT + ") on tag " + STR_TARGETSDATAREPRESENTATION, tsReadXML.lineNumber()
						};
					}
				}else if(name == STR_INPUTSNORMALIZATION){
					attributes = tsReadXML.attributes();
					if(attributes.hasAttribute(STR_TYPE) &&
					   attributes.hasAttribute(STR_MAXVALUE) &&
					   attributes.hasAttribute(STR_MINVALUE) &&
					   attributes.hasAttribute(STR_THRESHOLD) &&
					   attributes.hasAttribute(STR_AMPLITUDE) &&
					   attributes.hasAttribute(STR_ELONGATION))
					{
						inor->setType(normFromStrToInt(attributes.value(STR_TYPE).toString()));
						inor->setMaxValue(attributes.value(STR_MAXVALUE).toDouble());
						inor->setMinValue(attributes.value(STR_MINVALUE).toDouble());
						inor->setThreshold(attributes.value(STR_THRESHOLD).toDouble());
						inor->setAmplitude(attributes.value(STR_AMPLITUDE).toDouble());
						inor->setElongation(attributes.value(STR_ELONGATION).toDouble());
					}else{
						file.close();
						return
						{
							retTSF, false, NotWellFormedError, "NotWellFormedError: Missing attributes (" + STR_TYPE + ", " + STR_MAXVALUE + ", " + STR_MINVALUE + ", " + STR_THRESHOLD + ", " + STR_ELONGATION + ") on tag " + STR_INPUTSNORMALIZATION, tsReadXML.lineNumber()
						};
					}
				}else if(name == STR_TARGETSNORMALIZATION){
					attributes = tsReadXML.attributes();
					if(attributes.hasAttribute(STR_TYPE) &&
					   attributes.hasAttribute(STR_MAXVALUE) &&
					   attributes.hasAttribute(STR_MINVALUE) &&
					   attributes.hasAttribute(STR_THRESHOLD) &&
					   attributes.hasAttribute(STR_AMPLITUDE) &&
					   attributes.hasAttribute(STR_ELONGATION))
					{
						tnor->setType(normFromStrToInt(attributes.value(STR_TYPE).toString()));
						tnor->setMaxValue(attributes.value(STR_MAXVALUE).toDouble());
						tnor->setMinValue(attributes.value(STR_MINVALUE).toDouble());
						tnor->setThreshold(attributes.value(STR_THRESHOLD).toDouble());
						tnor->setAmplitude(attributes.value(STR_AMPLITUDE).toDouble());
						tnor->setElongation(attributes.value(STR_ELONGATION).toDouble());
					}else{
						file.close();
						return
						{
							retTSF, false, NotWellFormedError, "NotWellFormedError: Missing attributes (" + STR_TYPE + ", " + STR_MAXVALUE + ", " + STR_MINVALUE + ", " + STR_THRESHOLD + ", " + STR_ELONGATION + ") on tag " + STR_TARGETSNORMALIZATION, tsReadXML.lineNumber()
						};
					}
				}else if(name == STR_PATTERN){
					attributes = tsReadXML.attributes();
					if(attributes.hasAttribute(STR_INDEX))
					{
						lastPatternIndex = attributes.value(STR_INDEX).toInt();
					}else{
						file.close();
						return
						{
							retTSF, false, NotWellFormedError, "NotWellFormedError: Missing attributes (" + STR_INDEX + ") on tag " + STR_PATTERN, tsReadXML.lineNumber()
						};
					}
				}else if(name == STR_INPUTS){
					text = tsReadXML.readElementText(QXmlStreamReader::SkipChildElements);
					textElements = text.split(STR_SEPARATOR, QString::KeepEmptyParts, Qt::CaseInsensitive);
					sTextElements = textElements.size();
					if(sTextElements == iSize){
						for(int i = 0; i < sTextElements; i++){
							inputs[lastPatternIndex][i] = textElements[i].toDouble();
						}
					}else{
						file.close();
						return
						{
							retTSF, false, NotWellFormedError, "NotWellFormedError: Incongruence between reported input size with found inputs elements", tsReadXML.lineNumber()
						};
					}
				}else if(name == STR_TARGETS){
					text = tsReadXML.readElementText(QXmlStreamReader::SkipChildElements);
					textElements = text.split(STR_SEPARATOR, QString::KeepEmptyParts, Qt::CaseInsensitive);
					sTextElements = textElements.size();
					if(sTextElements == tSize){
						for(int t = 0; t < sTextElements; t++){
							targets[lastPatternIndex][t] = textElements[t].toDouble();
						}
					}else{
						file.close();
						return
						{
							retTSF, false, NotWellFormedError, "NotWellFormedError: Incongruence between reported target size with found target elements", tsReadXML.lineNumber()
						};
					}
				}
			}
		}

		retTSF->setFileName(file.fileName());
		res.file = retTSF;

		ts->setPatternCount(pSize);
		ts->setInputs(inputs, iSize);
		ts->setTargets(targets, tSize);
		ts->setInputsNormalization(inor);
		ts->setTargetsNormalization(tnor);
		ts->setInputsDataRepresentation(idr);
		ts->setTargetsDataRepresentation(tdr);

		res.sucess = true;
		res.errnum = toTSFError(QXmlStreamReader::NoError);
		res.errormsg = "";
		res.line = -1;

		file.close();
		return res;
	}else{
		file.close();
		return
		{
			retTSF, false, toTSFError(file.error()), file.errorString(), -1
		};
	}
}
Ejemplo n.º 23
0
CC_FILE_ERROR LoadPolyline(QFile& file, ccHObject& container, int32_t index, ESRI_SHAPE_TYPE shapeTypeInt, const CCVector3d& PShift)
{
	char header[40];
	file.read(header,40);
	//check for errors
	if (file.error() != QFile::NoError)
		return CC_FERR_READING;

	//Byte 0: Box
	{
		//The Bounding Box for the PolyLine stored in the order Xmin, Ymin, Xmax, Ymax
		//DGM: ignored
		//double xMin = qFromLittleEndian<double>(*reinterpret_cast<double*>(header   ));
		//double xMax = qFromLittleEndian<double>(*reinterpret_cast<double*>(header+ 8));
		//double yMin = qFromLittleEndian<double>(*reinterpret_cast<double*>(header+16));
		//double yMax = qFromLittleEndian<double>(*reinterpret_cast<double*>(header+24));
	}

	//Byte 32: NumParts (The number of parts in the PolyLine)
	int32_t numParts = qFromLittleEndian<int32_t>(*reinterpret_cast<int32_t*>(header+32));

	//Byte 36: NumPoints (The total number of points for all parts)
	int32_t numPoints = qFromLittleEndian<int32_t>(*reinterpret_cast<int32_t*>(header+36));

	//Byte 40: Parts (An array of length NumParts)
	//for each part, the index of its first point in the points array
	std::vector<int32_t> startIndexes;
	{
		try
		{
			startIndexes.resize(numParts,0);
		}
		catch(std::bad_alloc)
		{
			return CC_FERR_NOT_ENOUGH_MEMORY;
		}
		for (int32_t i=0; i!=numParts; ++i)
		{
			file.read(header,4);
			startIndexes[i] = qFromLittleEndian<int32_t>(*reinterpret_cast<int32_t*>(header));
		}
		//FIXME: we should use this information and create as many polylines as necessary!
	}

	ccPointCloud* vertices = new ccPointCloud("vertices");
	if (!vertices->reserve(numPoints))
	{
		return CC_FERR_NOT_ENOUGH_MEMORY;
	}
	vertices->setEnabled(false);
	
	//Points (An array of length NumPoints)
	{
		for (int32_t i=0; i<numPoints; ++i)
		{
			file.read(header,16);
			//check for errors
			if (file.error() != QFile::NoError)
				return CC_FERR_READING;
			double x = qFromLittleEndian<double>(*reinterpret_cast<double*>(header  ));
			double y = qFromLittleEndian<double>(*reinterpret_cast<double*>(header+8));
			CCVector3 P(static_cast<PointCoordinateType>(x + PShift.x),
						static_cast<PointCoordinateType>(y + PShift.y),
						0);
			vertices->addPoint(P);
		}
	}

	//3D polylines
	bool is3D = (shapeTypeInt > SHP_POINT_Z && shapeTypeInt < SHP_POINT_M);
	if (is3D)
	{
		//Z boundaries
		{
			file.read(header,16);
			//DGM: ignored
			//double zMin = qFromLittleEndian<double>(*reinterpret_cast<double*>(header  ));
			//double zMax = qFromLittleEndian<double>(*reinterpret_cast<double*>(header+8));
		}

		//Z coordinates (an array of length NumPoints)
		{
			for (int32_t i=0; i<numPoints; ++i)
			{
				file.read(header,8);
				//check for errors
				if (file.error() != QFile::NoError)
					return CC_FERR_READING;
				double z = qFromLittleEndian<double>(*reinterpret_cast<double*>(header));
				const CCVector3* P = vertices->getPoint(i);
				const_cast<CCVector3*>(P)->z = static_cast<PointCoordinateType>(z + PShift.z);
			}
		}
	}

	//3D polylines or 2D polylines + measurement
	if (shapeTypeInt > SHP_POINT_Z)
	{
		//M boundaries
		ccScalarField* sf = 0;
		{
			file.read(header,16);
			//check for errors
			if (file.error() != QFile::NoError)
				return CC_FERR_READING;
			double mMin = qFromLittleEndian<double>(*reinterpret_cast<double*>(header  ));
			double mMax = qFromLittleEndian<double>(*reinterpret_cast<double*>(header+8));

			if (mMin != ESRI_NO_DATA && mMax != ESRI_NO_DATA)
			{
				sf = new ccScalarField("Measures");
				if (!sf->reserve(numPoints))
				{
					ccLog::Warning("[SHP] Not enough memory to load scalar values!");
					sf->release();
					sf = 0;
				}
			}
		}

		//M values (an array of length NumPoints)
		if (sf)
		{
			double scalar = qToLittleEndian<double>(ESRI_NO_DATA);
			for (int32_t i=0; i<numPoints; ++i)
			{
				file.read(header,8);
				//check for errors
				if (file.error() != QFile::NoError)
					return CC_FERR_READING;
				double m = qFromLittleEndian<double>(*reinterpret_cast<double*>(header));
				ScalarType s = m == ESRI_NO_DATA ? NAN_VALUE : static_cast<ScalarType>(m);
				sf->addElement(s);
			}
			sf->computeMinAndMax();
			int sfIdx = vertices->addScalarField(sf);
			vertices->setCurrentDisplayedScalarField(sfIdx);
			vertices->showSF(true);
		}
	}

	//and of course the polyline!
	{
		ccPolyline* poly = new ccPolyline(vertices);
		poly->addChild(vertices);

		//test if the polyline is closed
		if (numPoints > 2 && (*vertices->getPoint(0) - *vertices->getPoint(numPoints-1)).norm() < ZERO_TOLERANCE)
		{
			numPoints--;
			vertices->resize(numPoints);
			poly->setClosed(true);
		}

		if (!poly->reserve(numPoints))
		{
			delete poly;
			return CC_FERR_NOT_ENOUGH_MEMORY;
		}
		poly->addPointIndex(0,numPoints);
		poly->showSF(vertices->sfShown());
		poly->setName(QString("Polyline #%1").arg(index));
		poly->set2DMode(!is3D); //FIXME DGM: maybe we should ask the user?
		container.addChild(poly);
	}

	return CC_FERR_NO_ERROR;
}
Ejemplo n.º 24
0
void CFileHasher::run()
{
	QTime tTime;
	QByteArray baBuffer;

	const int nBufferSize = 64 * 1024;

	m_pSection.lock();

	while(!m_lQueue.isEmpty())
	{
		CSharedFilePtr pFile = m_lQueue.dequeue();
		systemLog.postLog(LogSeverity::Debug, QString("Hashing %1").arg(pFile->m_sFileName));
		//qDebug() << "Hashing" << pFile->m_sFileName;
		tTime.start();
		m_pSection.unlock();

		bool bHashed = true;

		QFile f;
		f.setFileName(pFile->m_sDirectory + QString("/") + pFile->m_sFileName);

		if(f.exists() && f.open(QFile::ReadOnly))
		{
			baBuffer.resize(nBufferSize);

			pFile->m_lHashes.append(new CHash(CHash::SHA1));

			while(!f.atEnd())
			{
				if(!m_bActive)
				{
					systemLog.postLog(LogSeverity::Debug, QString("CFileHasher aborting..."));
					//qDebug() << "CFileHasher aborting...";
					bHashed = false;
					break;
				}
				qint64 nRead = f.read(baBuffer.data(), nBufferSize);

				if(nRead < 0)
				{
					bHashed = false;
					systemLog.postLog(LogSeverity::Debug, QString("File read error: %1").arg(f.error()));
					//qDebug() << "File read error:" << f.error();
					break;
				}
				else if(nRead < nBufferSize)
				{
					baBuffer.resize(nRead);
				}

				for(int i = 0; i < pFile->m_lHashes.size(); i++)
				{
					pFile->m_lHashes[i]->AddData(baBuffer);
				}

			}

			f.close();
		}
		else
		{
			systemLog.postLog(LogSeverity::Debug, QString("File open error: %1").arg(f.error()));
			//qDebug() << "File open error: " << f.error();
			bHashed = false;
		}

		if(bHashed)
		{
			double nRate = (f.size() / (tTime.elapsed() / 1000.0)) / 1024.0 / 1024.0;
			systemLog.postLog(LogSeverity::Debug, QString("File %1 hashed at %2 MB/s").arg(pFile->m_sFileName).arg(nRate));
			//qDebug() << "File " << pFile->m_sFileName << "hashed at" << nRate << "MB/s:";
			for(int i = 0; i < pFile->m_lHashes.size(); i++)
			{
				pFile->m_lHashes[i]->Finalize();
				systemLog.postLog(LogSeverity::Debug, QString("%1").arg(pFile->m_lHashes[i]->ToURN()));
				//qDebug() << pFile->m_lHashes[i]->ToURN();
			}
			emit FileHashed(pFile);
		}

		m_pSection.lock();

		if(!m_bActive)
		{
			break;
		}

		if(bHashed && m_lQueue.isEmpty())
		{
			emit QueueEmpty();
			systemLog.postLog(LogSeverity::Debug, QString("Hasher waiting..."));
			//qDebug() << "Hasher " << this << "waiting...";
			CFileHasher::m_oWaitCond.wait(&m_pSection, 10000);
		}
	}

	for(uint i = 0; i < m_nMaxHashers; i++)
	{
		if(m_pHashers[i] == this)
		{
			m_pHashers[i] = 0;
			deleteLater();
			m_nRunningHashers--;

			if(m_nRunningHashers == 0)
			{
				delete [] m_pHashers;
				m_pHashers = 0;
			}
			break;
		}
	}

	m_pSection.unlock();

	systemLog.postLog(LogSeverity::Debug, QString("CFileHasher done. %1").arg(m_nRunningHashers));
	//qDebug() << "CFileHasher done. " << m_nRunningHashers;
}
Ejemplo n.º 25
0
int Parser::parseXML( std::map< std::pair< QString , QString > , QString> & m )
    {
        /* We'll parse the example.xml */
        QFile* file = new QFile(m_uifileuri.data());

        /* If we can't open it, let's show an error message. */
        if (!file->open(QIODevice::ReadOnly | QIODevice::Text))
        {
            QString errMsg = file->errorString();
            QFile::FileError err = QFile::NoError; //in Qt5, replace QFile by  QFileDevice
            err = file->error();
            qDebug() << err;
            return 1;
        }

        /* QXmlStreamReader takes any QIODevice. */
        QXmlStreamReader xml(file);

        /* We'll parse the XML until we reach end of it.*/
        while(!xml.atEnd() && !xml.hasError())
        {

            QXmlStreamReader::TokenType token = xml.readNext();     // Read next element

            if(token == QXmlStreamReader::StartDocument)
            {   //If token is just StartDocument, we'll go to next
                continue;
            }

            else if (xml.qualifiedName() == "widget" && xml.isEndElement() != true)
            {
                QString widgetType = xml.attributes().value("", "class").toString() ;
                QString widgetName = xml.attributes().value("", "name").toString() ;
                if( !widgetName.startsWith( m_prefix ) )
                {
                  continue ;
                }
                if (widgetType.compare("QTextEdit") == 0
                    || widgetType.compare("QComboBox") == 0
                    || widgetType.compare("QLineEdit") == 0)
                {
                    m[std::make_pair(widgetType, widgetName)] = "QString";
                }
                else if (widgetType.compare("QCheckBox") == 0
                         || widgetType.compare("QRadioButton") == 0)
                {
                    m[std::make_pair(widgetType, widgetName)] = "bool";
                }
                else if (widgetType.compare("QDoubleSpinBox") == 0)
                {
                    m[std::make_pair(widgetType, widgetName)] = "double";
                }
                else if (widgetType.compare("QSpinBox") == 0
                         || widgetType.compare("QScrollBar") == 0)
                {
                    m[std::make_pair(widgetType, widgetName)] = "int";
                }
                else if (widgetType.compare("QListWidget") == 0)
                {
                    m[std::make_pair(widgetType, widgetName)] = "std::map<std::pair<unsigned long,QString>,bool>";
                }
                // Store values into the dictionary
    //            m[std::make_pair(widgetType, xml.attributes().at(1).value().toString())] = "";

                // Print values to the console

            }

        }
        /* Error handling. */
        if(xml.hasError())
        {

        }
        /* Removes any device() or data from the reader
         * and resets its internal state to the initial state. */
        xml.clear();

        file->close();
        delete file;

        return 0;
    }
Ejemplo n.º 26
0
int main(int argc, char * argv[])
{
    bool impl = false;
    bool wrap = false;
    bool subcl = false;
    bool extract = false;
    bool imagecollection = false;
    bool imagecollection_tmpfile = false;
    bool convert = false;
    QStringList images;
    const char *error = 0;
    const char* fileName = 0;
    const char* className = 0;
    const char* headerFile = 0;
    const char* convertedUiFile = 0;
    QByteArray outputFile;
    QByteArray qrcOutputFile;
    QByteArray image_tmpfile;
    const char* projectName = 0;
    const char* trmacro = 0;
    bool nofwd = false;
    bool fix = false;
    bool deps = false;
    bool implicitIncludes = true;
    QByteArray pchFile;


    QApplication app(argc, argv, false);

    for (int n = 1; n < argc && error == 0; n++) {
        QByteArray arg = argv[n];
        if (arg[0] == '-') {                        // option
            QByteArray opt = arg.data() + 1;
            if (opt[0] == 'o') {                // output redirection
                if (opt[1] == '\0') {
                    if (!(n < argc-1)) {
                        error = "Missing output-file name";
                        break;
                    }
                    outputFile = argv[++n];
                } else
                    outputFile = opt.data() + 1;
            } else if (opt[0] == 'i' || opt == "impl") {
                impl = true;
                if (opt == "impl" || opt[1] == '\0') {
                    if (!(n < argc-1)) {
                        error = "Missing name of header file";
                        break;
                    }
                    headerFile = argv[++n];
                } else
                    headerFile = opt.data() + 1;
            } else if (opt[0] == 'w' || opt == "wrap") {
                wrap = true;
                if (opt == "wrap" || opt[1] == '\0') {
                    if (!(n < argc-1)) {
                        error = "Missing name of converted ui file";
                        break;
                    }
                    convertedUiFile = argv[++n];
                } else
                    convertedUiFile = opt.data() + 1;
            } else if (opt == "extract") {                // output redirection
                extract = true;
                if (!(n < argc-1)) {
                    error = "Missing output qrc-file name";
                    break;
                }
                qrcOutputFile = argv[++n];
            } else if ( opt[0] == 'e' || opt == "embed" ) {
                imagecollection = true;
                if ( opt == "embed" || opt[1] == '\0' ) {
                    if ( !(n < argc-1) ) {
                        error = "Missing name of project";
                        break;
                    }
                    projectName = argv[++n];
                } else {
                    projectName = opt.data() + 1;
                }
                if ( argc > n+1 && qstrcmp( argv[n+1], "-f" ) == 0 ) {
                    imagecollection_tmpfile = true;
                    image_tmpfile = argv[n+2];
                    n += 2;
                }
            } else if (opt == "d") {
                deps = true;
            } else if (opt == "no-implicit-includes") {
                implicitIncludes = false;
            } else if (opt == "nofwd") {
                nofwd = true;
            } else if (opt == "nounload") {
                // skip
            } else if (opt == "convert") {
                convert = true;
            } else if (opt == "subdecl") {
                subcl = true;
                if (!(n < argc-2)) {
                    error = "Missing arguments";
                    break;
                }
                className = argv[++n];
                headerFile = argv[++n];
            } else if (opt == "subimpl") {
                subcl = true;
                impl = true;
                if (!(n < argc-2)) {
                    error = "Missing arguments";
                    break;
                }
                className = argv[++n];
                headerFile = argv[++n];
            } else if (opt == "tr") {
                if (opt == "tr" || opt[1] == '\0') {
                    if (!(n < argc-1)) {
                        error = "Missing tr macro.";
                        break;
                    }
                    trmacro = argv[++n];
                } else {
                    trmacro = opt.data() + 1;
                }
            } else if (opt == "L") {
                if (!(n < argc-1)) {
                    error = "Missing plugin path.";
                    break;
                }
                ++n; // ignore the next argument
            } else if (opt == "version") {
                fprintf(stderr,
                         "Qt User Interface Compiler version %s\n",
                         QT_VERSION_STR);
                return 1;
            } else if (opt == "help") {
                break;
            } else if (opt == "fix") {
                fix = true;
            } else if (opt == "pch") {
                if (!(n < argc-1)) {
                    error = "Missing name of PCH file";
                    break;
                }
                pchFile = argv[++n];
            } else {
                error = "Unrecognized option";
            }
        } else {
            if (imagecollection && !imagecollection_tmpfile)
                images << QLatin1String(argv[n]);
            else if (fileName)                // can handle only one file
                error = "Too many input files specified";
            else
                fileName = argv[n];
        }
    }

    if (argc < 2 || error || (!fileName && !imagecollection)) {
        fprintf(stderr,
                 "Qt User Interface Compiler version %s\n",
                 QT_VERSION_STR);
        if (error)
            fprintf(stderr, "uic: %s\n", error);

        fprintf(stderr, "Usage: %s  [options] [mode] <uifile>\n\n"
                 "Convert a UI file to version 4:\n"
                 "   %s  [options] -convert <uifile>\n"
                 "Generate declaration:\n"
                 "   %s  [options] <uifile>\n"
                 "\t<uiheaderfile>  name of the data file\n"
                 "   %s  [options] -decl <uiheaderfile> <uifile>\n"
                 "\t<uiheaderfile>  name of the data file\n"
                 "   %s  [options] -wrap <converteduifile> <uifile>\n"
                 "\t<converteduifile>  name of the converted ui file\n"
                 "Generate implementation:\n"
                 "   %s  [options] -impl <headerfile> <uifile>\n"
                 "\t<headerfile>    name of the declaration file\n"
                 "Generate image collection:\n"
                 "   %s  [options] -embed <project> <image1> <image2> <image3> ...\n"
                 "or\n"
                 "   %s  [options] -embed <project> -f <temporary file containing image names>\n"
                 "\t<project>       project name\n"
                 "\t<image[1-N]>    image files\n"
                 "Generate subclass declaration:\n"
                 "   %s  [options] -subdecl <subclassname> <baseclassheaderfile> <uifile>\n"
                 "\t<subclassname>     name of the subclass to generate\n"
                 "\t<baseclassheaderfile>    declaration file of the baseclass\n"
                 "Generate subclass implementation:\n"
                 "   %s  [options] -subimpl <subclassname> <subclassheaderfile> <uifile>\n"
                 "\t<subclassname>     name of the subclass to generate\n"
                 "\t<subclassheaderfile>    declaration file of the subclass\n"
                 "Options:\n"
                 "\t-o file            Write output to file rather than stdout\n"
                 "\t-extract qrcFile   Create resource file and extract embedded images into \"image\" dir\n"
                 "\t-pch file          Add #include \"file\" as the first statement in implementation\n"
                 "\t-nofwd             Omit forward declarations of custom classes\n"
                 "\t-no-implicit-includes Do not generate #include-directives for custom classes\n"
                 "\t-nounload          Don't unload plugins after processing\n"
                 "\t-tr func           Use func() instead of tr() for i18n\n"
                 "\t-L path            Additional plugin search path\n"
                 "\t-version           Display version of uic\n"
                 "\t-help              Display this information\n"
                 , argv[0], argv[0], argv[0], argv[0], argv[0], argv[0], argv[0], argv[0], argv[0], argv[0]
           );
        return 1;
    }

    if (imagecollection_tmpfile) {
        QFile ifile(QFile::decodeName(image_tmpfile));
        if (ifile.open(QIODevice::ReadOnly)) {
            QTextStream ts(&ifile);
            QString s = ts.read();
            s = s.simplified();
            images = s.split(QLatin1Char(' '));
            for (QStringList::Iterator it = images.begin(); it != images.end(); ++it)
                *it = (*it).simplified();
        }
    }

    QFile fileOut;
    if (!outputFile.isEmpty()) {
        fileOut.setFileName(QFile::decodeName(outputFile));
        if (!fileOut.open(QIODevice::WriteOnly)) {
            fprintf(stderr, "%s: Could not open output file '%s'\n", argv[0], outputFile.data());
            return 1;
        }
    } else {
        fileOut.open(QIODevice::WriteOnly, stdout);
    }

    QTextStream out(&fileOut);

    Ui3Reader ui3(out);
    ui3.setExtractImages(extract, qrcOutputFile);

    if (projectName && imagecollection) {
        out.setEncoding(QTextStream::Latin1);
        ui3.embed(projectName, images);
        return 0;
    }

    out.setEncoding(QTextStream::UnicodeUTF8);

    QFile file(QFile::decodeName(fileName));
    if (!file.open(QIODevice::ReadOnly)) {
        fprintf(stderr, "%s: Could not open file '%s'\n", argv[0], fileName);
        return 1;
    }

    QDomDocument doc;
    QString errMsg;
    int errLine;
    if (!doc.setContent(&file, &errMsg, &errLine)) {
        fprintf(stderr, "%s: Failed to parse %s: %s in line %d\n", argv[0], fileName, errMsg.latin1(), errLine);
        return 1;
    }

    QDomElement e = doc.firstChild().toElement();
    double version = e.attribute(QLatin1String("version"), QLatin1String("3.0")).toDouble();

    if (version > 3.3) {
        fprintf(stderr, "%s: File generated with too recent version of Qt Designer (%s vs. %s)\n",
                  argv[0], e.attribute(QLatin1String("version")).latin1(), "3.3");
        return 1;
    }

    DomTool::fixDocument(doc);

    if (fix) {
        out << doc.toString();
        return 0;
    }

    if (imagecollection) {
        out.setEncoding(QTextStream::Latin1);
        ui3.embed(projectName, images);
        return 0;
    } else if (deps) {
        QStringList globalIncludes, localIncludes;
        ui3.computeDeps(e, globalIncludes, localIncludes, impl);

        foreach (QString i, globalIncludes)
            printf("%s\n", i.toLatin1().constData());

        foreach (QString i, localIncludes)
            printf("%s\n", i.toLatin1().constData());

        if (impl)
            printf("%s\n", headerFile);

        return 0;
    } else if (convert) {
        ui3.generateUi4(QFile::decodeName(fileName), QFile::decodeName(outputFile), doc, implicitIncludes);
        return 0;
    }

    QString protector;
    if (subcl && className && !impl)
        protector = QString::fromUtf8(className).toUpper() + QLatin1String("_H");

    if (!protector.isEmpty()) {
        out << "#ifndef " << protector << endl;
        out << "#define " << protector << endl;
    }

    if (!pchFile.isEmpty() && impl) {
        out << "#include \"" << pchFile << "\" // PCH include" << endl;
    }

    if (headerFile) {
        out << "#include \"" << headerFile << "\"" << endl << endl;
    }

    QString convertedUi;
    if (wrap) {
        convertedUi = QFile::decodeName(convertedUiFile);
        int pos = convertedUi.lastIndexOf(".ui");
        if (pos > 0) {
            convertedUi = convertedUi.mid(0, pos);
            convertedUi += QLatin1String(".h");
        }
        convertedUi = QLatin1String("ui_") + convertedUi;
    }

    ui3.generate(QFile::decodeName(fileName),
        QFile::decodeName(outputFile),
        doc,
        !impl,
        subcl,
        QString::fromUtf8(trmacro),
        QString::fromUtf8(className),
        nofwd,
        implicitIncludes, 
        convertedUi);

    if (!protector.isEmpty()) {
        out << endl;
        out << "#endif // " << protector << endl;
    }

    if (fileOut.error() != QFile::NoError) {
        fprintf(stderr, "%s: Error writing to file\n", argv[0]);
        if (!outputFile.isEmpty())
            remove(outputFile);
    }

    return 0;
}