Ejemplo n.º 1
0
void DataBlockFile::prepareToWrite()
{
 //   std::cerr << "DataBlockFile[" << m_fileName << "]: prepareToWrite" << std::endl;
    if (!m_file.isWritable()) {
        m_file.close();
        m_file.open(QIODevice::WriteOnly | QIODevice::Append);
        Q_ASSERT(m_file.isWritable());
    }
}
Ejemplo n.º 2
0
/** \fn copy(QFile&,QFile&,uint)
 *  \brief Copies src file to dst file.
 *
 *   If the dst file is open, it must be open for writing.
 *   If the src file is open, if must be open for reading.
 *
 *   The files will be in the same open or close state after
 *   this function runs as they were prior to this function being called.
 *
 *   This function does not care if the files are actual files.
 *   For compatibility with pipes and socket streams the file location
 *   will not be reset to 0 at the end of this function. If the function
 *   is successful the file pointers will be at the end of the copied
 *   data.
 *
 *  \param dst Destination QFile
 *  \param src Source QFile
 *  \param block_size Optional block size in bytes, must be at least 1024,
 *                    otherwise the default of 16 KB will be used.
 *  \return bytes copied on success, -1 on failure.
 */
long long copy(QFile &dst, QFile &src, uint block_size)
{
    uint buflen = (block_size < 1024) ? (16 * 1024) : block_size;
    char *buf = new char[buflen];
    bool odst = false, osrc = false;

    if (!buf)
        return -1LL;

    if (!dst.isWritable() && !dst.isOpen())
        odst = dst.open(QIODevice::Unbuffered|QIODevice::WriteOnly|QIODevice::Truncate);

    if (!src.isReadable() && !src.isOpen())
        osrc = src.open(QIODevice::Unbuffered|QIODevice::ReadOnly);

    bool ok = dst.isWritable() && src.isReadable();
    long long total_bytes = 0LL;
    while (ok)
    {
        long long rlen, wlen, off = 0;
        rlen = src.read(buf, buflen);
        if (rlen<0)
        {
            VERBOSE(VB_IMPORTANT, "util.cpp:copy: read error");
            ok = false;
            break;
        }
        if (rlen==0)
            break;

        total_bytes += (long long) rlen;

        while ((rlen-off>0) && ok)
        {
            wlen = dst.write(buf + off, rlen - off);
            if (wlen>=0)
                off+= wlen;
            if (wlen<0)
            {
                VERBOSE(VB_IMPORTANT, "util.cpp:copy: write error");
                ok = false;
            }
        }
    }
    delete[] buf;

    if (odst)
        dst.close();

    if (osrc)
        src.close();

    return (ok) ? total_bytes : -1LL;
}
Ejemplo n.º 3
0
static __forceinline void doWriteOutput(QFile &outFile, const QResource *const resource)
{
	for(int i = 0; i < 64; i++)
	{
		if(outFile.open(QIODevice::WriteOnly))
		{
			break;
		}
		if(i == 0)
		{
			qWarning("Failed to open file on first attemp, retrying...");
		}
		Sleep(25);
	}
	
	//Write data to file
	if(outFile.isOpen() && outFile.isWritable())
	{
		if(outFile.write(reinterpret_cast<const char*>(resource->data()), resource->size()) != resource->size())
		{
			QFile::remove(QFileInfo(outFile).canonicalFilePath());
			MUTILS_THROW_FMT("File '%s' could not be written!", MUTILS_UTF8(QFileInfo(outFile).fileName()));
		}
	}
	else
	{
		MUTILS_THROW_FMT("File '%s' could not be created!", MUTILS_UTF8(QFileInfo(outFile).fileName()));
	}

	//Close file after it has been written
	outFile.close();
}
Ejemplo n.º 4
0
 void XmlSerializable ::
 saveAsXml(const QFileInfo& fileinfo, const char* element_tag) const
 {
   QString s = getAsXml(element_tag);
   if (s.isNull()) ntk_throw_exception("Empty xml document.");
   QFile file (fileinfo.absoluteFilePath());
   qDebug() << fileinfo.absoluteFilePath();
   file.open(QFile::WriteOnly);
   ntk_throw_exception_if(!file.isWritable(),
                          "Cannot write into file "
                          + fileinfo.absoluteFilePath().toStdString());
   file.write(s.toUtf8());
   file.close();
 }
Ejemplo n.º 5
0
  bool File::writable(const String& file)
  {
    QFileInfo fi(file.toQString());

    bool tmp = false;
    if (fi.exists())
    {
      tmp = fi.isWritable();
    }
    else
    {
      QFile f;
      f.setFileName(file.toQString());
      f.open(QIODevice::WriteOnly);
      tmp = f.isWritable();
      f.remove();
    }

    return tmp;
  }
Ejemplo n.º 6
0
void RxDev::openSpecFile(){
    const QModelIndex index = ui->treeView_availableNodes->selectionModel()->currentIndex();
    QModelIndex seekRoot = index;
    while(seekRoot.parent() != QModelIndex())
    {
        seekRoot = seekRoot.parent();
    }
    QString filePath =  seekRoot.child(0,0).child(0,0).data(Qt::DisplayRole).toString();
    //qDebug()<<filePath;
    SpecFileParser *specParser = new SpecFileParser;
    specParser->nodeParser(filePath);

    SpecFileEdit specFile(&specParser->node);
    //qDebug()<<QString::fromStdString(specParser->node.type);
    specFile.setWindowTitle("Specfile: "+seekRoot.data(Qt::DisplayRole).toString());
    bool accept = specFile.exec();
    if ((accept)){
        QFile file;
        file.setFileName(filePath);
        file.open(QIODevice::WriteOnly | QIODevice::Text);
        if (file.isWritable()){
            QString tempContens = specParser->writeSpecFile(&specParser->node);
            QTextStream text(&file);
            text<<tempContens;
            //qDebug()<<"subs "<<specFile.getSubscriptions();
            file.close();
            QMessageBox::information( this, "File written!", "The file "+filePath+" was updated\n", QMessageBox::Ok, 0 );
            on_pushButton_refreshNodesOrComps_clicked();
        } else
            QMessageBox::critical(this, "File is write protected!", "The file "+filePath+" could not get updated\n", QMessageBox::Ok, 0 );

        //        setType(nodeEdit.getType());
        //        setName(nodeEdit.getName());
        //        setArgs(nodeEdit.getArgs());


    }
//    QDesktopServices::openUrl(QUrl::fromLocalFile( filePath));
}
Ejemplo n.º 7
0
bool FormattedTouchstone::Write(FormattedNetworkData &network, QString filename) {
    QFile file;
    CreateFile(file, filename, network);
    if (file.isWritable() == false) {
        if (file.isOpen()) file.close();
        return(false);
    }
    //else
    QTextStream snpFile(&file);
    WriteComments(network, snpFile);
    WriteOptions(network, snpFile);
    if (network.numberOfPorts() != 2)
        WriteData(network, snpFile);
    else {
        FormattedNetworkData copyNetwork = network;
        Flip2Ports(copyNetwork);
        WriteData(copyNetwork, snpFile);

    }
    snpFile.flush();
    file.close();
    return(true);
}
Ejemplo n.º 8
0
ClientSocketOpt::ClientSocketOpt(QObject *parent) : QObject(parent)
{
    timerid = -1;
    recvCounts = 0;
    socket = nullptr;
    socketThread = new QThread;
    socketThread->setObjectName("client socket thread");
    this->moveToThread(socketThread);

    connect(socketThread, &QThread::finished, this, [=] () {
        this->deleteLater();
        socketThread->deleteLater();
    });

    connect(this, &ClientSocketOpt::connectHost,
            this, [=] (QString ip, quint16 port) {
        socket = new QTcpSocket(this);
        connect(socket, &QTcpSocket::connected,
                this, [=] () {
            // connected
            emit connected();
        });
        socket->connectToHost(ip, port);
        if (!socket->waitForConnected())
        {
            emit recvInformation(cn("接收终止"));
            emit disconnected();
            socketThread->quit();
            return;
        }


        QFile *file = new QFile(this);
        TcpDataDeal *deal = new TcpDataDeal(this);
        MessageDataDeal *msg = new MessageDataDeal(this);
        connect(deal, &TcpDataDeal::fullFrameData,
                msg, &MessageDataDeal::ParserFrameData);

        connect(msg, &MessageDataDeal::recvMessageData,
                this, [=] (MessageData data) {
            if (data.datatype() != FileSendType &&
                data.datatype() != commonStr)
                return;
            if (data.datatype() == commonStr)
            {
                MessageCharData *charconent = dynamic_cast<MessageCharData*>(data.content());
                if (charconent && charconent->type() == FileInfo)
                {
                    QString strinfo = QString::fromLocal8Bit(charconent->content());
                    emit recvInformation(strinfo);
                }
                return;
            }
            // write file
            FileDataContent *content = dynamic_cast<FileDataContent*>(data.content());
            if (!content)
                return;
            FileDataContent::FileHead *head = content->sendInfo();
            FileDataContent::FileNameHead *namehead = content->fileName();
            emit recvProgress(head->totalProgress >= 100 ? 99 : head->totalProgress, head->currentProgress / 100.0);
            QString filename = namehead->name.replace(namehead->path, savePath + "/");
            QFileInfo info(filename);
            emit recvInformation(cn("正在接收 %1").arg(info.fileName()));
            QDir dir(info.absolutePath());
            if (!dir.exists())
                dir.mkpath(info.absolutePath());
            if (file->fileName() != filename)
            {
                file->close();
                if (info.exists())
                {
                    QString dt = QDateTime::currentDateTime().toString("yyyyMMddhhmmss");
                    filename = info.absolutePath() + "/" +
                            info.bundleName() + dt + "." + info.suffix();
                }
                file->setFileName(filename);
            }
            if (!file->isOpen())
            {
                file->open(QIODevice::WriteOnly | QIODevice::Append);
            }
            if (file->isWritable())
            {
                file->write(content->data(), head->fileCurrentSize);
                if (head->currentProgress == 100)
                    file->close();
            }
            if (socketThread->isInterruptionRequested())
            {
                emit recvInformation(cn("接收终止"));
                file->close();
                socket->disconnectFromHost();
                socket->abort();
                socketThread->quit();
            }
            if (head->currentProgress == 100 && head->totalProgress == 100)
            {
                file->close();
                emit recvProgress(100, 1);
                emit recvInformation(cn("接收完成"));
                emit disconnected();
                socket->disconnectFromHost();
                socket->abort();
                socketThread->quit();
            }
        });

        connect(socket, &QTcpSocket::disconnected,
                this, [=] () {
            // disconnected
        });
        connect(socket, static_cast<void(QTcpSocket::*)(QAbstractSocket::SocketError)>(&QTcpSocket::error),
                this, [=] () {
            emit recvInformation(cn("接收终止"));
            emit disconnected();
            socketThread->quit();
        });
        connect(this, &ClientSocketOpt::senddata,
                this, [=] (QByteArray ba) {
            if (socket->state() != QAbstractSocket::ConnectedState)
                return;
            socket->write(ba);
            socket->waitForBytesWritten();
            socket->flush();
        });
        connect(socket, &QTcpSocket::readyRead,
                this, [=] () {
            // read data
            QByteArray ba = socket->readAll();
            recvCounts += ba.length();
            NetworkData nd(ba.data(), ba.length());
            deal->slotPosData(nd);
        });

        timerid = startTimer(1000);
    });
    socketThread->start();
}