void EffectNoise::PopulateOrExchange(ShuttleGui & S)
{
wxASSERT(nTypes == WXSIZEOF(kTypeStrings));
S.StartMultiColumn(2, wxCENTER);
{
auto typeChoices = LocalizedStrings(kTypeStrings, nTypes);
S.AddChoice(_("Noise type:"), wxT(""), &typeChoices)->SetValidator(wxGenericValidator(&mType));
FloatingPointValidator<double> vldAmp(6, &mAmp, NumValidatorStyle::NO_TRAILING_ZEROES);
vldAmp.SetRange(MIN_Amp, MAX_Amp);
S.AddTextBox(_("Amplitude (0-1):"), wxT(""), 12)->SetValidator(vldAmp);
S.AddPrompt(_("Duration:"));
mNoiseDurationT = safenew
NumericTextCtrl(S.GetParent(), wxID_ANY,
NumericConverter::TIME,
GetDurationFormat(),
GetDuration(),
mProjectRate,
NumericTextCtrl::Options{}
.AutoPos(true));
mNoiseDurationT->SetName(_("Duration"));
S.AddWindow(mNoiseDurationT, wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL | wxALL);
}
S.EndMultiColumn();
}
void EffectSilence::PopulateOrExchange(ShuttleGui & S)
{
S.StartVerticalLay();
{
S.StartHorizontalLay();
{
S.AddPrompt(_("Duration:"));
mDurationT = new
NumericTextCtrl(NumericConverter::TIME,
S.GetParent(),
wxID_ANY,
GetDurationFormat(),
GetDuration(),
mProjectRate,
wxDefaultPosition,
wxDefaultSize,
true);
mDurationT->SetName(_("Duration"));
mDurationT->EnableMenu();
S.AddWindow(mDurationT, wxALIGN_CENTER | wxALL);
}
S.EndHorizontalLay();
}
S.EndVerticalLay();
return;
}
void EffectNoise::PopulateOrExchange(ShuttleGui & S)
{
wxASSERT(kNumTypes == WXSIZEOF(kTypeStrings));
wxArrayString typeChoices;
for (int i = 0; i < kNumTypes; i++)
{
typeChoices.Add(wxGetTranslation(kTypeStrings[i]));
}
S.StartMultiColumn(2, wxCENTER);
{
S.AddChoice(_("Noise type:"), wxT(""), &typeChoices)->SetValidator(wxGenericValidator(&mType));
FloatingPointValidator<double> vldAmp(6, &mAmp, NUM_VAL_NO_TRAILING_ZEROES);
vldAmp.SetRange(MIN_Amp, MAX_Amp);
S.AddTextBox(_("Amplitude (0-1):"), wxT(""), 12)->SetValidator(vldAmp);
S.AddPrompt(_("Duration:"));
mNoiseDurationT = new
NumericTextCtrl(NumericConverter::TIME,
S.GetParent(),
wxID_ANY,
GetDurationFormat(),
GetDuration(),
mProjectRate,
wxDefaultPosition,
wxDefaultSize,
true);
mNoiseDurationT->SetName(_("Duration"));
mNoiseDurationT->EnableMenu();
S.AddWindow(mNoiseDurationT, wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL | wxALL);
}
S.EndMultiColumn();
}
void EffectDtmf::PopulateOrExchange(ShuttleGui & S)
{
// dialog will be passed values from effect
// Effect retrieves values from saved config
// Dialog will take care of using them to initialize controls
// If there is a selection, use that duration, otherwise use
// value from saved config: this is useful is user wants to
// replace selection with dtmf sequence
S.AddSpace(0, 5);
S.StartMultiColumn(2, wxCENTER);
{
wxTextValidator vldDtmf(wxFILTER_INCLUDE_CHAR_LIST, &dtmfSequence);
vldDtmf.SetIncludes(wxArrayString(WXSIZEOF(kSymbols), kSymbols));
mDtmfSequenceT = S.Id(ID_Sequence).AddTextBox(_("DTMF sequence:"), wxT(""), 10);
mDtmfSequenceT->SetValidator(vldDtmf);
FloatingPointValidator<double> vldAmp(3, &dtmfAmplitude, NUM_VAL_NO_TRAILING_ZEROES);
vldAmp.SetRange(MIN_Amplitude, MAX_Amplitude);
S.Id(ID_Amplitude).AddTextBox(_("Amplitude (0-1):"), wxT(""), 10)->SetValidator(vldAmp);
S.AddPrompt(_("Duration:"));
mDtmfDurationT = safenew
NumericTextCtrl(NumericConverter::TIME,
S.GetParent(),
ID_Duration,
GetDurationFormat(),
GetDuration(),
mProjectRate,
wxDefaultPosition,
wxDefaultSize,
true);
mDtmfDurationT->SetName(_("Duration"));
mDtmfDurationT->EnableMenu();
S.AddWindow(mDtmfDurationT);
S.AddFixedText(_("Tone/silence ratio:"), false);
S.SetStyle(wxSL_HORIZONTAL | wxEXPAND);
mDtmfDutyCycleS = S.Id(ID_DutyCycle).AddSlider( {},
dtmfDutyCycle * SCL_DutyCycle,
MAX_DutyCycle * SCL_DutyCycle,
MIN_DutyCycle * SCL_DutyCycle);
S.SetSizeHints(-1,-1);
}
S.EndMultiColumn();
S.StartMultiColumn(2, wxCENTER);
{
S.AddFixedText(_("Duty cycle:"), false);
mDtmfDutyT = S.AddVariableText(wxString::Format(wxT("%.1f %%"), dtmfDutyCycle), false);
S.AddFixedText(_("Tone duration:"), false);
mDtmfSilenceT = S.AddVariableText(wxString::Format(wxString(wxT("%.0f ")) + _("ms"), dtmfTone * 1000.0), false);
S.AddFixedText(_("Silence duration:"), false);
mDtmfToneT = S.AddVariableText(wxString::Format(wxString(wxT("%0.f ")) + _("ms"), dtmfSilence * 1000.0), false);
}
S.EndMultiColumn();
}
void SplashDialog::Populate( ShuttleGui & S )
{
this->SetBackgroundColour(theTheme.Colour( clrAboutBoxBackground ));
bool bShow;
gPrefs->Read(wxT("/GUI/ShowSplashScreen"), &bShow, true );
S.StartVerticalLay(1);
//v For now, change to AudacityLogoWithName via old-fashioned ways, not Theme.
m_pLogo = new wxBitmap((const char **) AudacityLogoWithName_xpm); //v
// JKC: Resize to 50% of size. Later we may use a smaller xpm as
// our source, but this allows us to tweak the size - if we want to.
// It also makes it easier to revert to full size if we decide to.
const float fScale=0.5f;// smaller size.
wxImage RescaledImage( m_pLogo->ConvertToImage() );
// wxIMAGE_QUALITY_HIGH not supported by wxWidgets 2.6.1, or we would use it here.
RescaledImage.Rescale( int(LOGOWITHNAME_WIDTH * fScale), int(LOGOWITHNAME_HEIGHT *fScale) );
wxBitmap RescaledBitmap( RescaledImage );
m_pIcon =
new wxStaticBitmap(S.GetParent(), -1,
//*m_pLogo, //v theTheme.Bitmap(bmpAudacityLogoWithName),
RescaledBitmap,
wxDefaultPosition,
wxSize(int(LOGOWITHNAME_WIDTH*fScale), int(LOGOWITHNAME_HEIGHT*fScale)));
S.Prop(0).AddWindow( m_pIcon );
mpHtml = new LinkingHtmlWindow(S.GetParent(), -1,
wxDefaultPosition,
wxSize(506, 280),
wxHW_SCROLLBAR_AUTO | wxSUNKEN_BORDER );
mpHtml->SetPage(HelpText( wxT("welcome") ));
S.Prop(1).AddWindow( mpHtml, wxEXPAND );
S.Prop(0).StartMultiColumn(2, wxEXPAND);
S.SetStretchyCol( 1 );// Column 1 is stretchy...
{
S.SetBorder( 5 );
S.Id( DontShowID).AddCheckBox( _("Don't show this again at start up"), bShow ? wxT("false") : wxT("true") );
wxButton *ok = new wxButton(S.GetParent(), wxID_OK);
ok->SetDefault();
S.SetBorder( 5 );
S.Prop(0).AddWindow( ok, wxALIGN_RIGHT| wxALL );
}
S.EndVerticalLay();
}
void TagsEditor::PopulateOrExchange(ShuttleGui & S)
{
bool bShow;
gPrefs->Read(wxT("/AudioFiles/ShowId3Dialog"), &bShow, true );
S.StartVerticalLay();
{
S.StartHorizontalLay(wxALIGN_LEFT, 0);
{
S.AddUnits(_("Use arrow keys (or ENTER key after editing) to navigate fields."));
}
S.EndHorizontalLay();
if (mGrid == NULL) {
mGrid = safenew Grid(S.GetParent(),
wxID_ANY,
wxDefaultPosition,
wxDefaultSize,
wxSUNKEN_BORDER);
mGrid->RegisterDataType(wxT("Combo"),
(mStringRenderer = safenew wxGridCellStringRenderer),
(mComboEditor = safenew ComboEditor(wxArrayString(), true)));
mGrid->SetColLabelSize(mGrid->GetDefaultRowSize());
auto cs = names();
// Build the initial (empty) grid
mGrid->CreateGrid(0, 2);
mGrid->SetRowLabelSize(0);
mGrid->SetDefaultCellAlignment(wxALIGN_LEFT, wxALIGN_CENTER);
mGrid->SetColLabelValue(0, _("Tag"));
mGrid->SetColLabelValue(1, _("Value"));
// Resize the name column and set default row height.
wxComboBox tc(this, wxID_ANY, wxT(""), wxDefaultPosition, wxDefaultSize, cs);
mGrid->SetColSize(0, tc.GetSize().x);
mGrid->SetColMinimalWidth(0, tc.GetSize().x);
}
S.Prop(1);
S.AddWindow(mGrid, wxEXPAND | wxALL);
S.StartMultiColumn(4, wxALIGN_CENTER);
{
S.Id(AddID).AddButton(_("&Add"));
S.Id(RemoveID).AddButton(_("&Remove"));
S.AddTitle( {} );
S.Id(ClearID).AddButton(_("Cl&ear"));
}
S.EndMultiColumn();
S.StartHorizontalLay(wxALIGN_CENTRE, 0);
{
S.StartStatic(_("Genres"));
{
S.StartMultiColumn(4, wxALIGN_CENTER);
{
S.Id(EditID).AddButton(_("E&dit..."));
S.Id(ResetID).AddButton(_("Rese&t..."));
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Template"));
{
S.StartMultiColumn(4, wxALIGN_CENTER);
{
S.Id(LoadID).AddButton(_("&Load..."));
S.Id(SaveID).AddButton(_("&Save..."));
S.AddTitle( {} );
S.Id(SaveDefaultsID).AddButton(_("Set De&fault"));
}
S.EndMultiColumn();
}
S.EndStatic();
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxALIGN_LEFT, 0);
{
S.Id( DontShowID ).AddCheckBox( _("Don't show this when exporting audio"), !bShow );
}
S.EndHorizontalLay();
}
S.EndVerticalLay();
S.AddStandardButtons(eOkButton | eCancelButton | eHelpButton);
}
void TagsEditor::PopulateOrExchange(ShuttleGui & S)
{
S.StartVerticalLay();
{
S.StartHorizontalLay(wxALIGN_LEFT, false);
{
S.AddUnits(_("Use arrow keys (or RETURN key after editing) to navigate fields."));
}
S.EndHorizontalLay();
if (mGrid == NULL) {
mGrid = new Grid(S.GetParent(),
wxID_ANY,
wxDefaultPosition,
wxDefaultSize,
wxSUNKEN_BORDER);
mStringRenderer = new wxGridCellStringRenderer;
mComboEditor = new ComboEditor(wxArrayString(), true);
mGrid->RegisterDataType(wxT("Combo"), mStringRenderer, mComboEditor);
mGrid->SetColLabelSize(mGrid->GetDefaultRowSize());
wxArrayString cs(WXSIZEOF(names), names);
// Build the initial (empty) grid
mGrid->CreateGrid(0, 2);
mGrid->SetRowLabelSize(0);
mGrid->SetDefaultCellAlignment(wxALIGN_LEFT, wxALIGN_CENTER);
mGrid->SetColLabelValue(0, _("Tag"));
mGrid->SetColLabelValue(1, _("Value"));
// Resize the name column and set default row height.
wxComboBox tc(this, wxID_ANY, wxT(""), wxDefaultPosition, wxDefaultSize, cs);
mGrid->SetColSize(0, tc.GetSize().x);
mGrid->SetColMinimalWidth(0, tc.GetSize().x);
}
S.Prop(true);
S.AddWindow(mGrid, wxEXPAND | wxALL);
S.StartMultiColumn(4, wxALIGN_CENTER);
{
S.Id(AddID).AddButton(_("&Add"));
S.Id(RemoveID).AddButton(_("&Remove"));
S.AddTitle(wxT(" "));
S.Id(ClearID).AddButton(_("Cl&ear"));
}
S.EndMultiColumn();
S.StartHorizontalLay(wxALIGN_CENTRE, false);
{
S.StartStatic(_("Genres"));
{
S.StartMultiColumn(4, wxALIGN_CENTER);
{
S.Id(EditID).AddButton(_("E&dit..."));
S.Id(ResetID).AddButton(_("Rese&t..."));
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Template"));
{
S.StartMultiColumn(4, wxALIGN_CENTER);
{
S.Id(LoadID).AddButton(_("&Load..."));
S.Id(SaveID).AddButton(_("&Save..."));
S.AddTitle(wxT(" "));
S.Id(SaveDefaultsID).AddButton(_("Set De&fault"));
}
S.EndMultiColumn();
}
S.EndStatic();
}
S.EndHorizontalLay();
}
S.EndVerticalLay();
S.AddStandardButtons(eOkButton | eCancelButton);
}
void ExtImportPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.TieCheckBox(_("Attempt to use filter in OpenFile dialog first"),
wxT("/ExtendedImport/OverrideExtendedImportByOpenFileDialogChoice"),
true);
S.StartStatic(_("Rules to choose import filters"), 1);
{
S.SetSizerProportion(1);
S.StartHorizontalLay (wxEXPAND, 1);
{
bool fillRuleTable = false;
if (RuleTable == NULL)
{
RuleTable = new Grid(S.GetParent(),EIPRuleTable);
RuleTable->SetColLabelSize(RuleTable->GetDefaultRowSize());
#if EXTIMPORT_MIME_SUPPORT
RuleTable->CreateGrid (0, 2, wxGrid::wxGridSelectRows);
#else
RuleTable->CreateGrid (0, 1, wxGrid::wxGridSelectRows);
#endif
RuleTable->DisableDragColMove ();
RuleTable->DisableDragRowSize ();
RuleTable->SetDefaultCellAlignment(wxALIGN_LEFT, wxALIGN_CENTER);
RuleTable->SetColLabelValue (0, _("File extensions"));
#if EXTIMPORT_MIME_SUPPORT
RuleTable->SetColLabelValue (1, _("Mime-types"));
#endif
RuleTable->SetRowLabelSize (0);
RuleTable->SetSelectionMode (wxGrid::wxGridSelectRows);
RuleTable->AutoSizeColumns ();
RuleTable->SetDropTarget (dragtarget1);
RuleTable->EnableDragCell (true);
fillRuleTable = true;
}
S.AddWindow(RuleTable, wxEXPAND | wxALL);
PluginList = S.Id(EIPPluginList).AddListControl ();
if (fillRuleTable)
{
PluginList->SetSingleStyle (wxLC_REPORT, true);
PluginList->SetSingleStyle (wxLC_SINGLE_SEL, true);
PluginList->InsertColumn (0, _("Importer order"));
PluginList->SetDropTarget (dragtarget2);
ExtImportItems *items = wxGetApp().mImporter->GetImportItems();
for (unsigned int i = 0; i < items->Count(); i++)
AddItemToTable (i, &(*items)[i]);
if (items->Count() > 0)
{
RuleTable->SelectRow(0);
RuleTable->SetGridCursor(0,0);
}
}
}
S.EndHorizontalLay();
S.StartHorizontalLay (wxSHRINK, 0);
{
MoveRuleUp = S.Id (EIPMoveRuleUp).AddButton (_("Move rule &up"));
MoveRuleDown = S.Id (EIPMoveRuleDown).AddButton
(_("Move rule &down"));
MoveFilterUp = S.Id (EIPMoveFilterUp).AddButton
(_("Move f&ilter up"));
MoveFilterDown = S.Id (EIPMoveFilterDown).AddButton
(_("Move &filter down"));
}
S.EndHorizontalLay();
S.StartHorizontalLay (wxSHRINK, 0);
{
AddRule = S.Id (EIPAddRule).AddButton (_("&Add new rule"));
DelRule = S.Id (EIPDelRule).AddButton (_("De&lete selected rule"));
}
S.EndHorizontalLay();
}
S.EndStatic();
Layout();
Fit();
SetMinSize(GetSize());
}
void EffectAutoDuck::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(5);
S.StartVerticalLay(true);
{
S.AddSpace(0, 5);
mPanel = safenew EffectAutoDuckPanel(S.GetParent(), this);
S.AddWindow(mPanel);
S.AddSpace(0, 5);
S.StartMultiColumn(6, wxCENTER);
{
FloatingPointValidator<double> vldDuckAmountDb(1, &mDuckAmountDb, NUM_VAL_NO_TRAILING_ZEROES);
vldDuckAmountDb.SetRange(MIN_DuckAmountDb, MAX_DuckAmountDb);
mDuckAmountDbBox = S.AddTextBox(_("Duck amount:"), wxT(""), 10);
mDuckAmountDbBox->SetValidator(vldDuckAmountDb);
S.AddUnits(_("dB"));
FloatingPointValidator<double> vldMaximumPause(2, &mMaximumPause, NUM_VAL_NO_TRAILING_ZEROES);
vldMaximumPause.SetRange(MIN_MaximumPause, MAX_MaximumPause);
mMaximumPauseBox = S.AddTextBox(_("Maximum pause:"), wxT(""), 10);
mMaximumPauseBox->SetValidator(vldMaximumPause);
S.AddUnits(_("seconds"));
FloatingPointValidator<double> vldOuterFadeDownLen(2, &mOuterFadeDownLen, NUM_VAL_NO_TRAILING_ZEROES);
vldOuterFadeDownLen.SetRange(MIN_OuterFadeDownLen, MAX_OuterFadeDownLen);
mOuterFadeDownLenBox = S.AddTextBox(_("Outer fade down length:"), wxT(""), 10);
mOuterFadeDownLenBox->SetValidator(vldOuterFadeDownLen);
S.AddUnits(_("seconds"));
FloatingPointValidator<double> vldOuterFadeUpLen(2, &mOuterFadeUpLen, NUM_VAL_NO_TRAILING_ZEROES);
vldOuterFadeUpLen.SetRange(MIN_OuterFadeUpLen, MAX_OuterFadeUpLen);
mOuterFadeUpLenBox = S.AddTextBox(_("Outer fade up length:"), wxT(""), 10);
mOuterFadeUpLenBox->SetValidator(vldOuterFadeUpLen);
S.AddUnits(_("seconds"));
FloatingPointValidator<double> vldInnerFadeDownLen(2, &mInnerFadeDownLen, NUM_VAL_NO_TRAILING_ZEROES);
vldInnerFadeDownLen.SetRange(MIN_InnerFadeDownLen, MAX_InnerFadeDownLen);
mInnerFadeDownLenBox = S.AddTextBox(_("Inner fade down length:"), wxT(""), 10);
mInnerFadeDownLenBox->SetValidator(vldInnerFadeDownLen);
S.AddUnits(_("seconds"));
FloatingPointValidator<double> vldInnerFadeUpLen(2, &mInnerFadeUpLen, NUM_VAL_NO_TRAILING_ZEROES);
vldInnerFadeUpLen.SetRange(MIN_InnerFadeUpLen, MAX_InnerFadeUpLen);
mInnerFadeUpLenBox = S.AddTextBox(_("Inner fade up length:"), wxT(""), 10);
mInnerFadeUpLenBox->SetValidator(vldInnerFadeUpLen);
S.AddUnits(_("seconds"));
}
S.EndMultiColumn();
S.StartMultiColumn(3, wxCENTER);
{
FloatingPointValidator<double> vldThresholdDb(2, &mThresholdDb, NUM_VAL_NO_TRAILING_ZEROES);
vldThresholdDb.SetRange(MIN_ThresholdDb, MAX_ThresholdDb);
mThresholdDbBox = S.AddTextBox(_("Threshold:"), wxT(""), 10);
mThresholdDbBox->SetValidator(vldThresholdDb);
S.AddUnits(_("dB"));
}
S.EndMultiColumn();
}
S.EndVerticalLay();
return;
}
void SplashDialog::Populate( ShuttleGui & S )
{
//#if ((AUDACITY_BRANDING == BRAND_JAMLING__EASY) || (AUDACITY_BRANDING == BRAND_JAMLING__FULL))
// this->SetBackgroundColour(wxColour(rrr, ggg, bbb)); // same as waveform color
//#else
// this->SetBackgroundColour(theTheme.Colour( clrAboutBoxBackground ));
//#endif
this->SetBackgroundColour(theTheme.Colour( clrAboutBoxBackground ));
bool bShow;
gPrefs->Read(wxT("/GUI/ShowSplashScreen"), &bShow, true );
S.StartVerticalLay(1);
wxImage buttonImageUp;
wxImage buttonImageOver;
wxSize buttonSize;
wxBitmap* pButtonBitmap;
wxBitmap* pButtonBitmapOver;
//vvv Change this compile flag when other brands are supported.
#if ((AUDACITY_BRANDING == BRAND_JAMLING__EASY) || (AUDACITY_BRANDING == BRAND_JAMLING__FULL))
//vvv Compiles only BRAND_JAMLING__EASY or BRAND_JAMLING__FULL
// because we don't load any other company_logo*_xpm consts yet.
pButtonBitmap = new wxBitmap(company_logo_xpm);
buttonImageUp = pButtonBitmap->ConvertToImage();
pButtonBitmapOver = new wxBitmap(company_logo_over_xpm);
buttonImageOver = pButtonBitmapOver->ConvertToImage();
buttonSize = wxSize(pButtonBitmap->GetWidth(), pButtonBitmap->GetHeight());
mButton_Logo =
new AButton(this, ID_BUTTON_LOGO,
wxDefaultPosition, buttonSize,
&buttonImageUp, &buttonImageOver,
&buttonImageUp, &buttonImageUp, //v other images?
true);
#else
//vvv For now, change to AudacityLogoWithName via old-fashioned ways, not Theme.
pButtonBitmap = //vvv theTheme.Bitmap(bmpAudacityLogoWithName)
new wxBitmap((const char **) AudacityLogoWithName_xpm);
buttonImageUp = pButtonBitmap->ConvertToImage();
// JKC: Resize to 50% of size. Later we may use a smaller xpm as
// our source, but this allows us to tweak the size - if we want to.
// It also makes it easier to revert to full size if we decide to.
const float fScale=0.5f;// smaller size.
buttonSize = wxSize(LOGOWITHNAME_WIDTH * fScale, LOGOWITHNAME_HEIGHT * fScale);
// wxIMAGE_QUALITY_HIGH not supported by wxWidgets 2.6.x, or we would use it here.
buttonImageUp.Rescale(buttonSize.GetWidth(), buttonSize.GetHeight());
buttonImageOver = buttonImageUp.Copy();
buttonImageOver.RotateHue(-0.01);
mButton_Logo =
new AButton(this, ID_BUTTON_LOGO,
wxDefaultPosition, buttonSize,
&buttonImageUp, &buttonImageOver,
&buttonImageUp, &buttonImageUp, //v other images?
true);
#endif
S.Prop(0).AddWindow(mButton_Logo);
mpHtml = new LinkingHtmlWindow(S.GetParent(), -1,
wxDefaultPosition,
wxSize(kWidth, 280),
wxHW_SCROLLBAR_AUTO | wxSUNKEN_BORDER );
mpHtml->SetPage(HelpText( wxT("welcome") ));
S.Prop(1).AddWindow( mpHtml, wxEXPAND );
S.Prop(0).StartMultiColumn(2, wxEXPAND);
S.SetStretchyCol( 1 );// Column 1 is stretchy...
{
S.SetBorder( 5 );
S.Id( DontShowID).AddCheckBox( _("Don't show this again at start up"), bShow ? wxT("false") : wxT("true") );
wxButton *ok = new wxButton(S.GetParent(), wxID_OK);
ok->SetDefault();
ok->SetFocus();
S.SetBorder( 5 );
S.Prop(0).AddWindow( ok, wxALIGN_RIGHT| wxALL );
}
S.EndVerticalLay();
}
void EffectCompressor::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(5);
S.StartHorizontalLay(wxEXPAND, true);
{
S.SetBorder(10);
mPanel = safenew EffectCompressorPanel(S.GetParent(),
mThresholdDB,
mNoiseFloorDB,
mRatio);
mPanel->SetMinSize(wxSize(400, 200));
S.Prop(true).AddWindow(mPanel, wxEXPAND | wxALL);
S.SetBorder(5);
}
S.EndHorizontalLay();
S.StartStatic(wxT(""));
{
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol(1);
mThresholdLabel = S.AddVariableText(_("Threshold:"), true,
wxALIGN_RIGHT | wxALIGN_CENTER_VERTICAL);
S.SetStyle(wxSL_HORIZONTAL);
mThresholdSlider = S.Id(ID_Threshold).AddSlider(wxT(""),
DEF_Threshold * SCL_Threshold,
MAX_Threshold * SCL_Threshold,
MIN_Threshold * SCL_Threshold);
mThresholdSlider->SetName(_("Threshold"));
mThresholdText = S.AddVariableText(wxT("XXX dB"), true,
wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL);
mNoiseFloorLabel = S.AddVariableText(_("Noise Floor:"), true,
wxALIGN_RIGHT | wxALIGN_CENTER_VERTICAL);
S.SetStyle(wxSL_HORIZONTAL);
mNoiseFloorSlider = S.Id(ID_NoiseFloor).AddSlider(wxT(""),
DEF_NoiseFloor / SCL_NoiseFloor,
MAX_NoiseFloor / SCL_NoiseFloor,
MIN_NoiseFloor / SCL_NoiseFloor);
mNoiseFloorSlider->SetName(_("Noise Floor"));
mNoiseFloorText = S.AddVariableText(wxT("XXX dB"), true,
wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL);
mRatioLabel = S.AddVariableText(_("Ratio:"), true,
wxALIGN_RIGHT | wxALIGN_CENTER_VERTICAL);
S.SetStyle(wxSL_HORIZONTAL);
mRatioSlider = S.Id(ID_Ratio).AddSlider(wxT(""),
DEF_Ratio * SCL_Ratio,
MAX_Ratio * SCL_Ratio,
MIN_Ratio * SCL_Ratio);
mRatioSlider->SetName(_("Ratio"));
mRatioSlider->SetPageSize(5);
mRatioText = S.AddVariableText(wxT("XXXX:1"), true,
wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL);
/* i18n-hint: Particularly in percussion, sounds can be regarded as having
* an 'attack' phase where the sound builds up and a 'decay' where the
* sound dies away. So this means 'onset duration'. */
mAttackLabel = S.AddVariableText(_("Attack Time:"), true,
wxALIGN_RIGHT | wxALIGN_CENTER_VERTICAL);
S.SetStyle(wxSL_HORIZONTAL);
mAttackSlider = S.Id(ID_Attack).AddSlider(wxT(""),
DEF_AttackTime * SCL_AttackTime,
MAX_AttackTime * SCL_AttackTime,
MIN_AttackTime * SCL_AttackTime);
mAttackSlider->SetName(_("Attack Time"));
mAttackText = S.AddVariableText(wxT("XXXX secs"), true,
wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL);
mDecayLabel = S.AddVariableText(_("Release Time:"), true,
wxALIGN_RIGHT | wxALIGN_CENTER_VERTICAL);
S.SetStyle(wxSL_HORIZONTAL);
mDecaySlider = S.Id(ID_Decay).AddSlider(wxT(""),
DEF_ReleaseTime * SCL_ReleaseTime,
MAX_ReleaseTime * SCL_ReleaseTime,
MIN_ReleaseTime * SCL_ReleaseTime);
mDecaySlider->SetName(_("Release Time"));
mDecayText = S.AddVariableText(wxT("XXXX secs"), true,
wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL);
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartHorizontalLay(wxCENTER, false);
{
/* i18n-hint: Make-up, i.e. correct for any reduction, rather than fabricate it.*/
mGainCheckBox = S.AddCheckBox(_("Make-up gain for 0 dB after compressing"),
DEF_Normalize ? wxT("true") : wxT("false"));
mPeakCheckBox = S.AddCheckBox(_("Compress based on Peaks"),
DEF_UsePeak ? wxT("true") : wxT("false"));
}
S.EndHorizontalLay();
}
void EffectChangeSpeed::PopulateOrExchange(ShuttleGui & S)
{
GetPrivateConfig(GetCurrentSettingsGroup(), wxT("TimeFormat"), mFormat, mFormat);
GetPrivateConfig(GetCurrentSettingsGroup(), wxT("VinylChoice"), mFromVinyl, mFromVinyl);
S.SetBorder(5);
S.StartVerticalLay(0);
{
S.AddSpace(0, 5);
S.AddTitle(_("Change Speed, affecting both Tempo and Pitch"));
S.AddSpace(0, 10);
// Speed multiplier and percent change controls.
S.StartMultiColumn(4, wxCENTER);
{
FloatingPointValidator<double> vldMultiplier(3, &mMultiplier, NUM_VAL_THREE_TRAILING_ZEROES);
vldMultiplier.SetRange(MIN_Percentage / 100.0, ((MAX_Percentage / 100.0) + 1));
mpTextCtrl_Multiplier =
S.Id(ID_Multiplier).AddTextBox(_("Speed Multiplier:"), wxT(""), 12);
mpTextCtrl_Multiplier->SetValidator(vldMultiplier);
FloatingPointValidator<double> vldPercentage(3, &m_PercentChange, NUM_VAL_THREE_TRAILING_ZEROES);
vldPercentage.SetRange(MIN_Percentage, MAX_Percentage);
mpTextCtrl_PercentChange =
S.Id(ID_PercentChange).AddTextBox(_("Percent Change:"), wxT(""), 12);
mpTextCtrl_PercentChange->SetValidator(vldPercentage);
}
S.EndMultiColumn();
// Percent change slider.
S.StartHorizontalLay(wxEXPAND);
{
S.SetStyle(wxSL_HORIZONTAL);
mpSlider_PercentChange =
S.Id(ID_PercentChange).AddSlider(wxT(""), 0, (int)kSliderMax, (int)MIN_Percentage);
mpSlider_PercentChange->SetName(_("Percent Change"));
}
S.EndHorizontalLay();
// Vinyl rpm controls.
S.StartMultiColumn(5, wxCENTER);
{
/* i18n-hint: "rpm" is an English abbreviation meaning "revolutions per minute". */
S.AddUnits(_("Standard Vinyl rpm:"));
wxASSERT(kNumVinyl == WXSIZEOF(kVinylStrings));
wxArrayString vinylChoices;
for (int i = 0; i < kNumVinyl; i++)
{
if (i == kVinyl_NA)
{
vinylChoices.Add(wxGetTranslation(kVinylStrings[i]));
}
else
{
vinylChoices.Add(kVinylStrings[i]);
}
}
mpChoice_FromVinyl =
S.Id(ID_FromVinyl).AddChoice(_("from"), wxT(""), &vinylChoices);
mpChoice_FromVinyl->SetName(_("From rpm"));
mpChoice_FromVinyl->SetSizeHints(100, -1);
mpChoice_ToVinyl =
S.Id(ID_ToVinyl).AddChoice(_("to"), wxT(""), &vinylChoices);
mpChoice_ToVinyl->SetName(_("To rpm"));
mpChoice_ToVinyl->SetSizeHints(100, -1);
}
S.EndMultiColumn();
// From/To time controls.
S.StartStatic(_("Selection Length"), 0);
{
S.StartMultiColumn(2, wxALIGN_LEFT);
{
S.AddPrompt(_("Current Length:"));
mpFromLengthCtrl = safenew
NumericTextCtrl(NumericConverter::TIME,
S.GetParent(),
wxID_ANY,
mFormat,
mFromLength,
mProjectRate);
mpFromLengthCtrl->SetName(_("from"));
mpFromLengthCtrl->SetToolTip(_("Current length of selection."));
mpFromLengthCtrl->SetReadOnly(true);
mpFromLengthCtrl->EnableMenu(false);
S.AddWindow(mpFromLengthCtrl, wxALIGN_LEFT);
S.AddPrompt(_("New Length:"));
mpToLengthCtrl = safenew
NumericTextCtrl(NumericConverter::TIME,
S.GetParent(),
ID_ToLength,
mFormat,
mToLength,
mProjectRate);
mpToLengthCtrl->SetName(_("to"));
mpToLengthCtrl->EnableMenu();
S.AddWindow(mpToLengthCtrl, wxALIGN_LEFT);
}
S.EndMultiColumn();
}
S.EndStatic();
}
S.EndVerticalLay();
}
void EffectScienFilter::PopulateOrExchange(ShuttleGui & S)
{
wxWindow *parent = S.GetParent();
S.AddSpace(5);
S.SetSizerProportion(1);
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol(1);
S.SetStretchyRow(0);
// -------------------------------------------------------------------
// ROW 1: Freq response panel and sliders for vertical scale
// -------------------------------------------------------------------
S.StartVerticalLay();
{
mdBRuler = new RulerPanel(parent, wxID_ANY);
mdBRuler->ruler.SetBounds(0, 0, 100, 100); // Ruler can't handle small sizes
mdBRuler->ruler.SetOrientation(wxVERTICAL);
mdBRuler->ruler.SetRange(30.0, -120.0);
mdBRuler->ruler.SetFormat(Ruler::LinearDBFormat);
mdBRuler->ruler.SetUnits(_("dB"));
mdBRuler->ruler.SetLabelEdges(true);
int w;
mdBRuler->ruler.GetMaxSize(&w, NULL);
mdBRuler->SetSize(wxSize(w, 150)); // height needed for wxGTK
S.SetBorder(1);
S.AddSpace(1, 1);
S.Prop(1);
S.AddWindow(mdBRuler, wxALIGN_RIGHT | wxTOP);
S.AddSpace(1, 1);
}
S.EndVerticalLay();
mPanel = new EffectScienFilterPanel(this, parent);
mPanel->SetFreqRange(mLoFreq, mNyquist);
S.SetBorder(5);
S.Prop(1);
S.AddWindow(mPanel, wxEXPAND | wxRIGHT);
S.SetSizeHints(-1, -1);
S.StartVerticalLay();
{
S.AddVariableText(_("+ dB"), false, wxCENTER);
S.SetStyle(wxSL_VERTICAL | wxSL_INVERSE);
mdBMaxSlider = S.Id(ID_dBMax).AddSlider(wxT(""), 10, 20, 0);
#if wxUSE_ACCESSIBILITY
mdBMaxSlider->SetName(_("Max dB"));
mdBMaxSlider->SetAccessible(new SliderAx(mdBMaxSlider, wxString(wxT("%d ")) + _("dB")));
#endif
S.SetStyle(wxSL_VERTICAL | wxSL_INVERSE);
mdBMinSlider = S.Id(ID_dBMin).AddSlider(wxT(""), -10, -10, -120);
S.AddVariableText(_("- dB"), false, wxCENTER);
#if wxUSE_ACCESSIBILITY
mdBMinSlider->SetName(_("Min dB"));
mdBMinSlider->SetAccessible(new SliderAx(mdBMinSlider, wxString(wxT("%d ")) + _("dB")));
#endif
}
S.EndVerticalLay();
// -------------------------------------------------------------------
// ROW 2: Frequency ruler
// -------------------------------------------------------------------
S.AddSpace(1, 1);
mfreqRuler = new RulerPanel(parent, wxID_ANY);
mfreqRuler->ruler.SetBounds(0, 0, 100, 100); // Ruler can't handle small sizes
mfreqRuler->ruler.SetOrientation(wxHORIZONTAL);
mfreqRuler->ruler.SetLog(true);
mfreqRuler->ruler.SetRange(mLoFreq, mNyquist);
mfreqRuler->ruler.SetFormat(Ruler::IntFormat);
mfreqRuler->ruler.SetUnits(wxT(""));
mfreqRuler->ruler.SetFlip(true);
mfreqRuler->ruler.SetLabelEdges(true);
int h;
mfreqRuler->ruler.GetMaxSize(NULL, &h);
mfreqRuler->SetMinSize(wxSize(-1, h));
S.Prop(1);
S.AddWindow(mfreqRuler, wxEXPAND | wxALIGN_LEFT | wxRIGHT);
S.AddSpace(1, 1);
// -------------------------------------------------------------------
// ROW 3 and 4: Type, Order, Ripple, Subtype, Cutoff
// -------------------------------------------------------------------
S.AddSpace(1, 1);
S.SetSizerProportion(0);
S.StartMultiColumn(8, wxALIGN_CENTER);
{
wxASSERT(kNumTypes == WXSIZEOF(kTypeStrings));
wxArrayString typeChoices;
for (int i = 0; i < kNumTypes; i++)
{
typeChoices.Add(wxGetTranslation(kTypeStrings[i]));
}
mFilterTypeCtl = S.Id(ID_Type).AddChoice(_("&Filter Type:"), wxT(""), &typeChoices);
mFilterTypeCtl->SetValidator(wxGenericValidator(&mFilterType));
S.SetSizeHints(-1, -1);
wxArrayString orders;
for (int i = 1; i <= 10; i++)
{
orders.Add(wxString::Format(wxT("%d"), i));
}
/*i18n-hint: 'Order' means the complexity of the filter, and is a number between 1 and 10.*/
mFilterOrderCtl = S.Id(ID_Order).AddChoice(_("O&rder:"), wxT(""), &orders);
mFilterOrderCtl->SetValidator(wxGenericValidator(&mOrderIndex));
S.SetSizeHints(-1, -1);
S.AddSpace(1, 1);
FloatingPointValidator<float> vldRipple(1, &mRipple);
vldRipple.SetRange(MIN_Passband, MAX_Passband);
mRippleCtlP = S.AddVariableText(_("&Passband Ripple:"), false, wxALL | wxALIGN_RIGHT | wxALIGN_CENTER_VERTICAL);
mRippleCtl = S.Id(ID_Ripple).AddTextBox(wxT(""), wxT(""), 10);
mRippleCtl->SetName(_("Passband Ripple (dB)"));
mRippleCtl->SetValidator(vldRipple);
mRippleCtlU = S.AddVariableText(_("dB"), false, wxALL | wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL);
wxASSERT(kNumSubTypes == WXSIZEOF(kSubTypeStrings));
wxArrayString subTypeChoices;
for (int i = 0; i < kNumSubTypes; i++)
{
subTypeChoices.Add(wxGetTranslation(kSubTypeStrings[i]));
}
mFilterSubTypeCtl = S.Id(ID_SubType).AddChoice(_("&Subtype:"), wxT(""), &subTypeChoices);
mFilterSubTypeCtl->SetValidator(wxGenericValidator(&mFilterSubtype));
S.SetSizeHints(-1, -1);
FloatingPointValidator<float> vldCutoff(1, &mCutoff);
vldCutoff.SetRange(MIN_Cutoff, mNyquist - 1);
mCutoffCtl = S.Id(ID_Cutoff).AddTextBox(_("C&utoff:"), wxT(""), 10);
mCutoffCtl->SetName(_("Cutoff (Hz)"));
mCutoffCtl->SetValidator(vldCutoff);
S.AddUnits(_("Hz"));
FloatingPointValidator<float> vldStopbandRipple(1, &mStopbandRipple);
vldStopbandRipple.SetRange(MIN_Stopband, MAX_Stopband);
mStopbandRippleCtlP = S.AddVariableText(_("Minimum S&topband Attenuation:"), false, wxALL | wxALIGN_RIGHT | wxALIGN_CENTER_VERTICAL);
mStopbandRippleCtl = S.Id(ID_StopbandRipple).AddTextBox(wxT(""), wxT(""), 10);
mStopbandRippleCtl->SetName(_("Minimum S&topband Attenuation (dB)"));
mStopbandRippleCtl->SetValidator(vldStopbandRipple);
mStopbandRippleCtlU = S.AddVariableText(_("dB"), false, wxALL | wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL);
}
S.EndMultiColumn();
S.AddSpace(1, 1);
}
S.EndMultiColumn();
mFilterTypeCtl->SetFocus();
return;
}
void EffectToneGen::PopulateOrExchange(ShuttleGui & S)
{
wxTextCtrl *t;
S.StartMultiColumn(2, wxCENTER);
{
wxChoice *c = S.AddChoice(_("Waveform:"), wxT(""), &mWaveforms);
c->SetValidator(wxGenericValidator(&mWaveform));
if (mChirp)
{
S.AddFixedText(wxT(""));
S.StartHorizontalLay(wxEXPAND);
{
S.StartHorizontalLay(wxLEFT, 50);
{
S.AddTitle(_("Start"));
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxLEFT, 50);
{
S.AddTitle(_("End"));
}
S.EndHorizontalLay();
}
S.EndHorizontalLay();
S.AddPrompt(_("Frequency (Hz):"));
S.StartHorizontalLay(wxEXPAND);
{
S.StartHorizontalLay(wxLEFT, 50);
{
FloatingPointValidator<double> vldStartFreq(6, &mFrequency[0], NUM_VAL_NO_TRAILING_ZEROES);
vldStartFreq.SetRange(MIN_StartFreq, GetActiveProject()->GetRate() / 2.0);
t = S.AddTextBox(wxT(""), wxT(""), 12);
t->SetName(_("Frequency Hertz Start"));
t->SetValidator(vldStartFreq);
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxLEFT, 50);
{
FloatingPointValidator<double> vldEndFreq(6, &mFrequency[1], NUM_VAL_NO_TRAILING_ZEROES);
vldEndFreq.SetRange(MIN_EndFreq, GetActiveProject()->GetRate() / 2.0);
t = S.AddTextBox(wxT(""), wxT(""), 12);
t->SetName(_("Frequency Hertz End"));
t->SetValidator(vldEndFreq);
}
S.EndHorizontalLay();
}
S.EndHorizontalLay();
S.AddPrompt(_("Amplitude (Hz):"));
S.StartHorizontalLay(wxEXPAND);
{
S.StartHorizontalLay(wxLEFT, 50);
{
FloatingPointValidator<double> vldStartAmp(6, &mAmplitude[0], NUM_VAL_NO_TRAILING_ZEROES);
vldStartAmp.SetRange(MIN_StartAmp, MAX_StartAmp);
t = S.AddTextBox(wxT(""), wxT(""), 12);
t->SetName(_("Amplitude Start"));
t->SetValidator(vldStartAmp);
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxLEFT, 50);
{
FloatingPointValidator<double> vldEndAmp(6, &mAmplitude[1], NUM_VAL_NO_TRAILING_ZEROES);
vldEndAmp.SetRange(MIN_EndAmp, MAX_EndAmp);
t = S.AddTextBox(wxT(""), wxT(""), 12);
t->SetName(_("Amplitude End"));
t->SetValidator(vldEndAmp);
}
S.EndHorizontalLay();
}
S.EndHorizontalLay();
c = S.AddChoice(_("Interpolation:"), wxT(""), &mInterpolations);
c->SetValidator(wxGenericValidator(&mInterpolation));
}
else
{
FloatingPointValidator<double> vldFrequency(6, &mFrequency[0], NUM_VAL_NO_TRAILING_ZEROES);
vldFrequency.SetRange(MIN_Frequency, GetActiveProject()->GetRate() / 2.0);
t = S.AddTextBox(_("Frequency (Hz):"), wxT(""), 12);
t->SetValidator(vldFrequency);
FloatingPointValidator<double> vldAmplitude(6, &mAmplitude[0], NUM_VAL_NO_TRAILING_ZEROES);
vldAmplitude.SetRange(MIN_Amplitude, MAX_Amplitude);
t = S.AddTextBox(_("Amplitude (0-1):"), wxT(""), 12);
t->SetValidator(vldAmplitude);
}
bool isSelection;
double duration = GetDuration(&isSelection);
S.AddPrompt(_("Duration:"));
mToneDurationT = new
NumericTextCtrl(NumericConverter::TIME,
S.GetParent(),
wxID_ANY,
isSelection ? _("hh:mm:ss + samples") : _("hh:mm:ss + milliseconds"),
duration,
mProjectRate,
wxDefaultPosition,
wxDefaultSize,
true);
mToneDurationT->SetName(_("Duration"));
mToneDurationT->EnableMenu();
S.AddWindow(mToneDurationT, wxALIGN_LEFT | wxALL);
}
S.EndMultiColumn();
return;
}
