/// Populates simple dialog that has a single tone.
void ToneGenDialog::PopulateOrExchangeStandard( ShuttleGui & S )
{
S.StartMultiColumn(2, wxCENTER);
{
S.TieChoice(_("Waveform") + wxString(wxT(":")), waveform, waveforms);
S.SetSizeHints(-1, -1);
// The added colon to improve visual consistency was placed outside
// the translatable strings to avoid breaking translations close to 2.0.
// TODO: Make colon part of the translatable string after 2.0.
S.TieNumericTextBox(_("Frequency (Hz)") + wxString(wxT(":")), frequency[0], 5);
S.TieNumericTextBox(_("Amplitude (0-1)") + wxString(wxT(":")), amplitude[0], 5);
S.AddPrompt(_("Duration") + wxString(wxT(":")));
if (mToneDurationT == NULL)
{
mToneDurationT = new
TimeTextCtrl(this,
wxID_ANY,
wxT(""),
mDuration,
mEffect->mProjectRate,
wxDefaultPosition,
wxDefaultSize,
true);
mToneDurationT->SetName(_("Duration"));
mToneDurationT->SetFormatString(mToneDurationT->GetBuiltinFormat(isSelection==true?(_("hh:mm:ss + samples")):(_("seconds"))));
mToneDurationT->EnableMenu();
}
S.AddWindow(mToneDurationT);
}
S.EndMultiColumn();
}
void NoiseDialog::PopulateOrExchange( ShuttleGui & S )
{
S.StartMultiColumn(2, wxCENTER);
{
S.TieChoice(_("Noise type:"), nType, nTypeList);
S.TieNumericTextBox(_("Amplitude (0-1)") + wxString(wxT(":")), nAmplitude, 10);
S.AddPrompt(_("Duration") + wxString(wxT(":")));
if (mNoiseDurationT == NULL)
{
mNoiseDurationT = new
NumericTextCtrl(NumericConverter::TIME, this,
wxID_ANY,
wxT(""),
nDuration,
mEffect->mProjectRate,
wxDefaultPosition,
wxDefaultSize,
true);
/* use this instead of "seconds" because if a selection is passed to
* the effect, I want it (nDuration) to be used as the duration, and
* with "seconds" this does not always work properly. For example,
* it rounds down to zero... */
mNoiseDurationT->SetName(_("Duration"));
mNoiseDurationT->SetFormatString(mNoiseDurationT->GetBuiltinFormat(nIsSelection==true?(_("hh:mm:ss + samples")):(_("hh:mm:ss + milliseconds"))));
mNoiseDurationT->EnableMenu();
}
S.AddWindow(mNoiseDurationT, wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL | wxALL);
}
S.EndMultiColumn();
}
void DtmfDialog::PopulateOrExchange( ShuttleGui & S )
{
wxTextValidator vldDtmf(wxFILTER_INCLUDE_CHAR_LIST);
vldDtmf.SetIncludes(wxArrayString(42, dtmfSymbols));
S.AddTitle(_("by Salvo Ventura"));
S.StartMultiColumn(2, wxEXPAND);
{
mDtmfStringT = S.Id(ID_DTMF_STRING_TEXT).AddTextBox(_("DTMF sequence:"), wxT(""), 10);
mDtmfStringT->SetValidator(vldDtmf);
// The added colon to improve visual consistency was placed outside
// the translatable strings to avoid breaking translations close to 2.0.
// TODO: Make colon part of the translatable string after 2.0.
S.TieNumericTextBox(_("Amplitude (0-1)") + wxString(wxT(":")), dAmplitude, 10);
S.AddPrompt(_("Duration:"));
if (mDtmfDurationT == NULL)
{
mDtmfDurationT = new
TimeTextCtrl(this,
ID_DTMF_DURATION_TEXT,
wxT(""),
dDuration,
mEffect->mProjectRate,
wxDefaultPosition,
wxDefaultSize,
true);
/* use this instead of "seconds" because if a selection is passed to the
* effect, I want it (dDuration) to be used as the duration, and with
* "seconds" this does not always work properly. For example, it rounds
* down to zero... */
mDtmfDurationT->SetName(_("Duration"));
mDtmfDurationT->SetFormatString(mDtmfDurationT->GetBuiltinFormat(dIsSelection==true?(_("hh:mm:ss + samples")):(_("hh:mm:ss + milliseconds"))));
mDtmfDurationT->EnableMenu();
}
S.AddWindow(mDtmfDurationT);
S.AddFixedText(_("Tone/silence ratio:"), false);
S.SetStyle(wxSL_HORIZONTAL | wxEXPAND);
mDtmfDutyS = S.Id(ID_DTMF_DUTYCYCLE_SLIDER).AddSlider(wxT(""), (int)dDutyCycle, DUTY_MAX, DUTY_MIN);
S.SetSizeHints(-1,-1);
}
S.EndMultiColumn();
S.StartMultiColumn(2, wxCENTER);
{
S.AddFixedText(_("Duty cycle:"), false);
mDtmfDutyT = S.Id(ID_DTMF_DUTYCYCLE_TEXT).AddVariableText(wxString::Format(wxT("%.1f %%"), (float) dDutyCycle/DUTY_SCALE), false);
S.AddFixedText(_("Tone duration:"), false);
mDtmfSilenceT = S.Id(ID_DTMF_TONELEN_TEXT).AddVariableText(wxString::Format(wxString(wxT("%d ")) + _("ms"), (int) dTone * 1000), false);
S.AddFixedText(_("Silence duration:"), false);
mDtmfToneT = S.Id(ID_DTMF_SILENCE_TEXT).AddVariableText(wxString::Format(wxString(wxT("%d ")) + _("ms"), (int) dSilence * 1000), false);
}
S.EndMultiColumn();
}
void DirectoriesPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("Temporary files directory"));
{
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol(1);
S.Id(TempDirID);
mTempDir = S.TieTextBox(_("&Location:"),
wxT("/Directories/TempDir"),
wxT(""),
30);
S.Id(ChooseButtonID);
S.AddButton(_("C&hoose..."));
S.AddFixedText(_("Free Space:"));
mFreeSpace = S.AddVariableText(wxT(""));
}
S.EndMultiColumn();
}
S.EndStatic();
#ifdef DEPRECATED_AUDIO_CACHE
// See http://bugzilla.audacityteam.org/show_bug.cgi?id=545.
S.StartStatic(_("Audio cache"));
{
S.TieCheckBox(_("Play and/or record using &RAM (useful for slow drives)"),
wxT("/Directories/CacheBlockFiles"),
false);
S.StartTwoColumn();
{
S.TieNumericTextBox(_("Mi&nimum Free Memory (MB):"),
wxT("/Directories/CacheLowMem"),
16,
9);
}
S.EndTwoColumn();
S.AddVariableText(_("If the available system memory falls below this value, audio will no longer\nbe cached in memory and will be written to disk."))->Wrap(600);
}
S.EndStatic();
#endif // DEPRECATED_AUDIO_CACHE
}
void SpectrumPrefs::PopulateOrExchange(ShuttleGui & S)
{
mPopulating = true;
S.SetBorder(2);
// S.StartStatic(_("Track Settings"));
// {
mDefaultsCheckbox = 0;
if (mWt) {
/* i18n-hint: use is a verb */
mDefaultsCheckbox = S.Id(ID_DEFAULTS).TieCheckBox(_("Use Preferences"), mDefaulted);
}
S.StartStatic(_("Scale"));
{
S.StartTwoColumn();
{
S.Id(ID_SCALE).TieChoice(_("S&cale") + wxString(wxT(":")),
*(int*)&mTempSettings.scaleType,
&mScaleChoices);
mMinFreq =
S.Id(ID_MINIMUM).TieNumericTextBox(_("Mi&nimum Frequency (Hz):"),
mTempSettings.minFreq,
12);
mMaxFreq =
S.Id(ID_MAXIMUM).TieNumericTextBox(_("Ma&ximum Frequency (Hz):"),
mTempSettings.maxFreq,
12);
}
S.EndTwoColumn();
}
S.EndStatic();
S.StartStatic(_("Colors"));
{
S.StartTwoColumn();
{
mGain =
S.Id(ID_GAIN).TieNumericTextBox(_("&Gain (dB):"),
mTempSettings.gain,
8);
mRange =
S.Id(ID_RANGE).TieNumericTextBox(_("&Range (dB):"),
mTempSettings.range,
8);
mFrequencyGain =
S.Id(ID_FREQUENCY_GAIN).TieNumericTextBox(_("Frequency g&ain (dB/dec):"),
mTempSettings.frequencyGain,
4);
}
S.Id(ID_GRAYSCALE).TieCheckBox(_("S&how the spectrum using grayscale colors"),
mTempSettings.isGrayscale);
S.EndTwoColumn();
}
S.EndStatic();
S.StartStatic(_("Algorithm"));
{
S.StartMultiColumn(2);
{
mAlgorithmChoice =
S.Id(ID_ALGORITHM).TieChoice(_("A&lgorithm") + wxString(wxT(":")),
*(int*)&mTempSettings.algorithm,
&mAlgorithmChoices);
S.Id(ID_WINDOW_SIZE).TieChoice(_("Window &size:"),
mTempSettings.windowSize,
&mSizeChoices);
S.SetSizeHints(mSizeChoices);
S.Id(ID_WINDOW_TYPE).TieChoice(_("Window &type:"),
mTempSettings.windowType,
&mTypeChoices);
S.SetSizeHints(mTypeChoices);
#ifdef EXPERIMENTAL_ZERO_PADDED_SPECTROGRAMS
mZeroPaddingChoiceCtrl =
S.Id(ID_PADDING_SIZE).TieChoice(_("&Zero padding factor") + wxString(wxT(":")),
mTempSettings.zeroPaddingFactor,
&mZeroPaddingChoices);
S.SetSizeHints(mZeroPaddingChoices);
#endif
}
S.EndMultiColumn();
}
S.EndStatic();
#ifndef SPECTRAL_SELECTION_GLOBAL_SWITCH
S.Id(ID_SPECTRAL_SELECTION).TieCheckBox(_("Ena&ble Spectral Selection"),
mTempSettings.spectralSelection);
#endif
#ifdef EXPERIMENTAL_FFT_Y_GRID
S.TieCheckBox(_("Show a grid along the &Y-axis"),
mTempSettings.fftYGrid);
#endif //EXPERIMENTAL_FFT_Y_GRID
#ifdef EXPERIMENTAL_FIND_NOTES
/* i18n-hint: FFT stands for Fast Fourier Transform and probably shouldn't be translated*/
S.StartStatic(_("FFT Find Notes"));
{
S.StartTwoColumn();
{
mFindNotesMinA =
S.TieNumericTextBox(_("Minimum Amplitude (dB):"),
mTempSettings.fftFindNotes,
8);
mFindNotesN =
S.TieNumericTextBox(_("Max. Number of Notes (1..128):"),
mTempSettings.findNotesMinA,
8);
}
S.EndTwoColumn();
S.TieCheckBox(_("&Find Notes"),
mTempSettings.numberOfMaxima);
S.TieCheckBox(_("&Quantize Notes"),
mTempSettings.findNotesQuantize);
}
S.EndStatic();
#endif //EXPERIMENTAL_FIND_NOTES
// S.EndStatic();
#ifdef SPECTRAL_SELECTION_GLOBAL_SWITCH
S.StartStatic(_("Global settings"));
{
S.TieCheckBox(_("Ena&ble spectral selection"),
SpectrogramSettings::Globals::Get().spectralSelection);
}
S.EndStatic();
#endif
EnableDisableSTFTOnlyControls();
mPopulating = false;
}
void EffectsPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartScroller();
S.StartStatic(_("Enable Effects"));
{
#if USE_AUDIO_UNITS
S.TieCheckBox(_("Audio Unit"),
wxT("/AudioUnit/Enable"),
true);
#endif
// JKC: LADSPA, LV2, Nyquist, VST, VAMP should not be translated.
#if USE_LADSPA
S.TieCheckBox(wxT("&LADSPA"),
wxT("/Ladspa/Enable"),
true);
#endif
#if USE_LV2
S.TieCheckBox(wxT("LV&2"),
wxT("/LV2/Enable"),
true);
#endif
#if USE_NYQUIST
S.TieCheckBox(wxT("N&yquist"),
wxT("/Nyquist/Enable"),
true);
#endif
#if USE_VAMP
S.TieCheckBox(wxT("&Vamp"),
wxT("/VAMP/Enable"),
true);
#endif
#if USE_VST
S.TieCheckBox(wxT("V&ST"),
wxT("/VST/Enable"),
true);
#endif
}
S.EndStatic();
S.StartStatic(_("Effect Options"));
{
S.StartMultiColumn(2);
{
wxArrayString visualgroups;
wxArrayString prefsgroups;
visualgroups.Add(_("Sorted by Effect Name"));
visualgroups.Add(_("Sorted by Publisher and Effect Name"));
visualgroups.Add(_("Sorted by Type and Effect Name"));
visualgroups.Add(_("Grouped by Publisher"));
visualgroups.Add(_("Grouped by Type"));
prefsgroups.Add(wxT("sortby:name"));
prefsgroups.Add(wxT("sortby:publisher:name"));
prefsgroups.Add(wxT("sortby:type:name"));
prefsgroups.Add(wxT("groupby:publisher"));
prefsgroups.Add(wxT("groupby:type"));
wxChoice *c = S.TieChoice(_("S&ort or Group:"),
wxT("/Effects/GroupBy"),
wxT("name"),
visualgroups,
prefsgroups);
c->SetMinSize(c->GetBestSize());
S.TieNumericTextBox(_("&Maximum effects per group (0 to disable):"),
wxT("/Effects/MaxPerGroup"),
#if defined(__WXGTK__)
15,
#else
0,
#endif
5);
}
S.EndMultiColumn();
}
S.EndStatic();
#ifndef EXPERIMENTAL_EFFECT_MANAGEMENT
S.StartStatic(_("Plugin Options"));
{
S.TieCheckBox(_("Check for updated plugins when Audacity starts"),
wxT("/Plugins/CheckForUpdates"),
true);
S.TieCheckBox(_("Rescan plugins next time Audacity is started"),
wxT("/Plugins/Rescan"),
false);
}
S.EndStatic();
#endif
#ifdef EXPERIMENTAL_EQ_SSE_THREADED
S.StartStatic(_("Instruction Set"));
{
S.TieCheckBox(_("&Use SSE/SSE2/.../AVX"),
wxT("/SSE/GUI"),
true);
}
S.EndStatic();
#endif
S.EndScroller();
}
void MidiIOPrefs::PopulateOrExchange( ShuttleGui & S ) {
wxArrayString empty;
S.SetBorder(2);
S.StartStatic(_("Interface"));
{
S.StartMultiColumn(2);
{
S.Id(HostID);
/* i18n-hint: (noun) */
mHost = S.TieChoice(_("Host") + wxString(wxT(":")),
wxT("/MidiIO/Host"),
wxT(""),
mHostNames,
mHostLabels);
S.SetSizeHints(mHostNames);
S.AddPrompt(_("Using: PortMidi"));
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Playback"));
{
S.StartMultiColumn(2);
{
S.Id(PlayID);
mPlay = S.AddChoice(_("Device") + wxString(wxT(":")),
wxEmptyString,
&empty);
int latency = gPrefs->Read(wxT("/MidiIO/OutputLatency"),
DEFAULT_SYNTH_LATENCY);
mLatency = S.TieNumericTextBox(_("MIDI Synthesizer Latency (ms):"),
wxT("/MidiIO/SynthLatency"),
latency, 3);
}
S.EndMultiColumn();
}
S.EndStatic();
#ifdef EXPERIMENTAL_MIDI_IN
S.StartStatic(_("Recording"));
{
S.StartMultiColumn(2);
{
S.Id(RecordID);
mRecord = S.AddChoice(_("Device") + wxString(wxT(":")),
wxEmptyString,
&empty);
S.Id(ChannelsID);
/*
mChannels = S.AddChoice(_("Channels") + wxString(wxT(":")),
wxEmptyString,
&empty);
*/
}
S.EndMultiColumn();
}
S.EndStatic();
#endif
}
void QualityPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("Sampling"));
{
S.StartMultiColumn(2);
{
S.AddPrompt(_("Default Sample &Rate:"));
S.StartMultiColumn(2);
{
// If the value in Prefs isn't in the list, then we want
// the last item, 'Other...' to be shown.
S.SetNoMatchSelector(mSampleRateNames.GetCount() - 1);
// First the choice...
// We make sure it uses the ID we want, so that we get changes
S.Id(ID_SAMPLE_RATE_CHOICE);
// We make sure we have a pointer to it, so that we can drive it.
mSampleRates = S.TieChoice(wxT(""),
wxT("/SamplingRate/DefaultProjectSampleRate"),
AudioIO::GetOptimalSupportedSampleRate(),
mSampleRateNames,
mSampleRateLabels);
S.SetSizeHints(mSampleRateNames);
// Now do the edit box...
mOtherSampleRate = S.TieNumericTextBox(wxT(""),
mOtherSampleRateValue,
15);
}
S.EndHorizontalLay();
S.TieChoice(_("Default Sample &Format:"),
wxT("/SamplingRate/DefaultProjectSampleFormat"),
floatSample,
mSampleFormatNames,
mSampleFormatLabels);
S.SetSizeHints(mSampleFormatNames);
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Real-time Conversion"));
{
S.StartMultiColumn(2, wxEXPAND);
{
S.SetStretchyCol(2);
S.TieChoice(_("Sample Rate Con&verter:"),
Resample::GetFastMethodKey(),
Resample::GetFastMethodDefault(),
mConverterNames,
mConverterLabels),
S.SetSizeHints(mConverterNames);
S.TieChoice(_("&Dither:"),
wxT("/Quality/DitherAlgorithm"),
Dither::none,
mDitherNames,
mDitherLabels);
S.SetSizeHints(mDitherNames);
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("High-quality Conversion"));
{
S.StartMultiColumn(2);
{
S.TieChoice(_("Sample Rate Conver&ter:"),
Resample::GetBestMethodKey(),
Resample::GetBestMethodDefault(),
mConverterNames,
mConverterLabels),
S.SetSizeHints(mConverterNames);
S.TieChoice(_("Dit&her:"),
wxT("/Quality/HQDitherAlgorithm"),
Dither::shaped,
mDitherNames,
mDitherLabels);
S.SetSizeHints(mDitherNames);
}
S.EndMultiColumn();
}
S.EndStatic();
}
void RecordingPrefs::PopulateOrExchange(ShuttleGui & S)
{
wxTextCtrl *w;
S.SetBorder(2);
S.StartStatic(_("Playthrough"));
{
S.TieCheckBox(_("Overdub: &Play other tracks while recording new one"),
wxT("/AudioIO/Duplex"),
true);
#if defined(__WXMAC__)
S.TieCheckBox(_("&Hardware Playthrough: Listen while recording or monitoring new track"),
wxT("/AudioIO/Playthrough"),
false);
#endif
S.TieCheckBox(_("&Software Playthrough: Listen while recording or monitoring new track"),
wxT("/AudioIO/SWPlaythrough"),
false);
#if !defined(__WXMAC__)
S.AddUnits(wxString(wxT(" ")) + _("(uncheck when recording \"stereo mix\")"));
#endif
}
S.EndStatic();
S.StartStatic( _("Latency"));
{
S.StartThreeColumn();
{
// only show the following controls if we use Portaudio v19, because
// for Portaudio v18 we always use default buffer sizes
w = S.TieNumericTextBox(_("Audio to &buffer:"),
wxT("/AudioIO/LatencyDuration"),
DEFAULT_LATENCY_DURATION,
9);
S.AddUnits(_("milliseconds (higher = more latency)"));
w->SetName(w->GetName() + wxT(" ") + _("milliseconds (higher = more latency)"));
w = S.TieNumericTextBox(_("L&atency correction:"),
wxT("/AudioIO/LatencyCorrection"),
DEFAULT_LATENCY_CORRECTION,
9);
S.AddUnits(_("milliseconds (negative = backwards)"));
w->SetName(w->GetName() + wxT(" ") + _("milliseconds (negative = backwards)"));
}
S.EndThreeColumn();
}
S.EndStatic();
S.StartStatic(_("Sound Activated Recording"));
{
S.TieCheckBox(_("Sound Activated &Recording"),
wxT("/AudioIO/SoundActivatedRecord"),
false);
S.StartMultiColumn(2, wxEXPAND);
{
S.SetStretchyCol(1);
int dBRange = gPrefs->Read(wxT("/GUI/EnvdBRange"), ENV_DB_RANGE);
S.TieSlider(_("Sound Activation Le&vel (dB):"),
wxT("/AudioIO/SilenceLevel"),
-50,
0,
-dBRange);
}
S.EndMultiColumn();
}
S.EndStatic();
#ifdef AUTOMATED_INPUT_LEVEL_ADJUSTMENT
S.StartStatic(_("AutomatedRecording Level Adjustment"));
{
S.TieCheckBox(_("Enable Automated Recordingt Level Adjustment."),
wxT("/AudioIO/AutomatedInputLevelAdjustment"),
false);
S.StartMultiColumn(2, wxEXPAND);
{
S.SetStretchyCol(1);
/* i18n-hint: Desired maximum (peak) volume for sound */
S.TieSlider(_("Target Peak:"),
wxT("/AudioIO/TargetPeak"),
AILA_DEF_TARGET_PEAK,
100,
0);
S.TieSlider(_("Within:"),
wxT("/AudioIO/DeltaPeakVolume"),
AILA_DEF_DELTA_PEAK,
100,
0);
}
S.EndMultiColumn();
S.StartThreeColumn();
{
S.TieNumericTextBox(_("Analysis Time:"),
wxT("/AudioIO/AnalysisTime"),
AILA_DEF_ANALYSIS_TIME,
9);
S.AddUnits(_("milliseconds (time of one analysis)"));
S.TieNumericTextBox(_("Number of consecutive analysis:"),
wxT("/AudioIO/NumberAnalysis"),
AILA_DEF_NUMBER_ANALYSIS,
2);
S.AddUnits(_("0 means endless"));
}
S.EndThreeColumn();
}
S.EndStatic();
#endif
}