void ModulePrefs::PopulateOrExchange(ShuttleGui & S)
{
wxArrayString StatusChoices;
StatusChoices.Add( _("Disabled" ) );
StatusChoices.Add( _("Enabled" ) );
StatusChoices.Add( _("Ask" ) );
StatusChoices.Add( _("Failed" ) );
StatusChoices.Add( _("New" ) );
S.SetBorder(2);
S.StartStatic(_(""));
{
S.AddFixedText(_("These are experimental Modules. Enable them only if you've read the manual\nand know what you are doing.") );
S.AddFixedText(wxString(wxT(" ")) + _("'Ask' means Audacity will ask if you want to load the plug-each time it starts.") );
S.AddFixedText(wxString(wxT(" ")) + _("'Failed' means Audacity thinks the plug-in is broken and won't run it.") );
S.AddFixedText(wxString(wxT(" ")) + _("'New' is like 'Ask', but asks just once.") );
S.StartMultiColumn( 2 );
int i;
for(i=0;i<(int)mModules.GetCount();i++)
S.TieChoice( mModules[i], mStatuses[i], &StatusChoices );
S.EndMultiColumn();
lse);
}
S.EndStatic();
}
void EffectDtmf::PopulateOrExchange(ShuttleGui & S)
{
// dialog will be passed values from effect
// Effect retrieves values from saved config
// Dialog will take care of using them to initialize controls
// If there is a selection, use that duration, otherwise use
// value from saved config: this is useful is user wants to
// replace selection with dtmf sequence
S.AddSpace(0, 5);
S.StartMultiColumn(2, wxCENTER);
{
wxTextValidator vldDtmf(wxFILTER_INCLUDE_CHAR_LIST, &dtmfSequence);
vldDtmf.SetIncludes(wxArrayString(WXSIZEOF(kSymbols), kSymbols));
mDtmfSequenceT = S.Id(ID_Sequence).AddTextBox(_("DTMF sequence:"), wxT(""), 10);
mDtmfSequenceT->SetValidator(vldDtmf);
FloatingPointValidator<double> vldAmp(3, &dtmfAmplitude, NUM_VAL_NO_TRAILING_ZEROES);
vldAmp.SetRange(MIN_Amplitude, MAX_Amplitude);
S.Id(ID_Amplitude).AddTextBox(_("Amplitude (0-1):"), wxT(""), 10)->SetValidator(vldAmp);
S.AddPrompt(_("Duration:"));
mDtmfDurationT = safenew
NumericTextCtrl(NumericConverter::TIME,
S.GetParent(),
ID_Duration,
GetDurationFormat(),
GetDuration(),
mProjectRate,
wxDefaultPosition,
wxDefaultSize,
true);
mDtmfDurationT->SetName(_("Duration"));
mDtmfDurationT->EnableMenu();
S.AddWindow(mDtmfDurationT);
S.AddFixedText(_("Tone/silence ratio:"), false);
S.SetStyle(wxSL_HORIZONTAL | wxEXPAND);
mDtmfDutyCycleS = S.Id(ID_DutyCycle).AddSlider( {},
dtmfDutyCycle * SCL_DutyCycle,
MAX_DutyCycle * SCL_DutyCycle,
MIN_DutyCycle * SCL_DutyCycle);
S.SetSizeHints(-1,-1);
}
S.EndMultiColumn();
S.StartMultiColumn(2, wxCENTER);
{
S.AddFixedText(_("Duty cycle:"), false);
mDtmfDutyT = S.AddVariableText(wxString::Format(wxT("%.1f %%"), dtmfDutyCycle), false);
S.AddFixedText(_("Tone duration:"), false);
mDtmfSilenceT = S.AddVariableText(wxString::Format(wxString(wxT("%.0f ")) + _("ms"), dtmfTone * 1000.0), false);
S.AddFixedText(_("Silence duration:"), false);
mDtmfToneT = S.AddVariableText(wxString::Format(wxString(wxT("%0.f ")) + _("ms"), dtmfSilence * 1000.0), false);
}
S.EndMultiColumn();
}
void DtmfDialog::PopulateOrExchange( ShuttleGui & S )
{
wxTextValidator vldDtmf(wxFILTER_INCLUDE_CHAR_LIST);
vldDtmf.SetIncludes(wxArrayString(42, dtmfSymbols));
S.AddTitle(_("by Salvo Ventura"));
S.StartMultiColumn(2, wxEXPAND);
{
mDtmfStringT = S.Id(ID_DTMF_STRING_TEXT).AddTextBox(_("DTMF sequence:"), wxT(""), 10);
mDtmfStringT->SetValidator(vldDtmf);
// The added colon to improve visual consistency was placed outside
// the translatable strings to avoid breaking translations close to 2.0.
// TODO: Make colon part of the translatable string after 2.0.
S.TieNumericTextBox(_("Amplitude (0-1)") + wxString(wxT(":")), dAmplitude, 10);
S.AddPrompt(_("Duration:"));
if (mDtmfDurationT == NULL)
{
mDtmfDurationT = new
TimeTextCtrl(this,
ID_DTMF_DURATION_TEXT,
wxT(""),
dDuration,
mEffect->mProjectRate,
wxDefaultPosition,
wxDefaultSize,
true);
/* use this instead of "seconds" because if a selection is passed to the
* effect, I want it (dDuration) to be used as the duration, and with
* "seconds" this does not always work properly. For example, it rounds
* down to zero... */
mDtmfDurationT->SetName(_("Duration"));
mDtmfDurationT->SetFormatString(mDtmfDurationT->GetBuiltinFormat(dIsSelection==true?(_("hh:mm:ss + samples")):(_("hh:mm:ss + milliseconds"))));
mDtmfDurationT->EnableMenu();
}
S.AddWindow(mDtmfDurationT);
S.AddFixedText(_("Tone/silence ratio:"), false);
S.SetStyle(wxSL_HORIZONTAL | wxEXPAND);
mDtmfDutyS = S.Id(ID_DTMF_DUTYCYCLE_SLIDER).AddSlider(wxT(""), (int)dDutyCycle, DUTY_MAX, DUTY_MIN);
S.SetSizeHints(-1,-1);
}
S.EndMultiColumn();
S.StartMultiColumn(2, wxCENTER);
{
S.AddFixedText(_("Duty cycle:"), false);
mDtmfDutyT = S.Id(ID_DTMF_DUTYCYCLE_TEXT).AddVariableText(wxString::Format(wxT("%.1f %%"), (float) dDutyCycle/DUTY_SCALE), false);
S.AddFixedText(_("Tone duration:"), false);
mDtmfSilenceT = S.Id(ID_DTMF_TONELEN_TEXT).AddVariableText(wxString::Format(wxString(wxT("%d ")) + _("ms"), (int) dTone * 1000), false);
S.AddFixedText(_("Silence duration:"), false);
mDtmfToneT = S.Id(ID_DTMF_SILENCE_TEXT).AddVariableText(wxString::Format(wxString(wxT("%d ")) + _("ms"), (int) dSilence * 1000), false);
}
S.EndMultiColumn();
}
void DtmfDialog::PopulateOrExchange( ShuttleGui & S )
{
wxTextValidator vldDtmf(wxFILTER_INCLUDE_CHAR_LIST);
vldDtmf.SetIncludes(wxArrayString(20, dtmfSymbols));
S.AddTitle(_("by Salvo Ventura (2006)"));
S.StartMultiColumn(2, wxEXPAND);
{
mDtmfStringT = S.Id(ID_DTMF_STRING_TEXT).AddTextBox(_("DTMF sequence:"), wxT(""), 10);
mDtmfStringT->SetValidator(vldDtmf);
S.AddPrompt(_("DTMF duration:"));
mDtmfDurationT = new
TimeTextCtrl(this,
ID_DTMF_DURATION_TEXT,
/*
use this instead of "seconds" because if a selection is passed to the effect,
I want it (dDuration) to be used as the duration, and with "seconds" this does
not always work properly. For example, it rounds down to zero...
*/
TimeTextCtrl::GetBuiltinFormat(dIsSelection==true?(wxT("hh:mm:ss + samples")):(wxT("seconds"))),
dDuration,
44100,
wxDefaultPosition,
wxDefaultSize,
true);
S.AddWindow(mDtmfDurationT);
mDtmfDurationT->EnableMenu();
S.AddFixedText(_("Tone/silence ratio:"), false);
S.SetStyle(wxSL_HORIZONTAL | wxEXPAND);
mDtmfDutyS = S.Id(ID_DTMF_DUTYCYCLE_SLIDER).AddSlider(wxT(""), (int)dDutyCycle, DUTY_MAX);
mDtmfDutyS->SetRange(DUTY_MIN, DUTY_MAX);
S.SetSizeHints(-1,-1);
}
S.EndMultiColumn();
S.StartMultiColumn(2, wxCENTER);
{
S.AddFixedText(_("Duty cycle:"), false);
mDtmfDutyT = S.Id(ID_DTMF_DUTYCYCLE_TEXT).AddVariableText(wxString::Format(wxT("%.1f %%"), (float) dDutyCycle/DUTY_SCALE), false);
S.AddFixedText(_("Tone duration:"), false);
mDtmfSilenceT = S.Id(ID_DTMF_TONELEN_TEXT).AddVariableText(wxString::Format(wxString(wxT("%d ")) + _("ms"), (int) dTone * 1000), false);
S.AddFixedText(_("Silence duration:"), false);
mDtmfToneT = S.Id(ID_DTMF_SILENCE_TEXT).AddVariableText(wxString::Format(wxString(wxT("%d ")) + _("ms"), (int) dSilence * 1000), false);
}
S.EndMultiColumn();
}
/// Populates more complex dialog that has a chirp.
void ToneGenDialog::PopulateOrExchangeExtended( ShuttleGui & S )
{
S.StartMultiColumn(2, wxCENTER);
{
S.TieChoice( _("Waveform:"), waveform, waveforms);
S.SetSizeHints(-1,-1);
}
S.EndMultiColumn();
S.StartMultiColumn(3, wxCENTER);
{
S.AddFixedText(wxT(""));
S.AddTitle( _("Start"));
S.AddTitle( _("End") );
S.TieTextBox( _("Frequency / Hz"),frequency[0], 10);
S.TieTextBox( wxT(""),frequency[1], 10);
S.TieTextBox( _("Amplitude (0-1)"),amplitude[0], 10);
S.TieTextBox( wxT(""),amplitude[1], 10);
}
S.EndMultiColumn();
S.StartMultiColumn(2, wxCENTER);
{
S.TieTextBox( _("Length (seconds)"),length, 10 );
}
S.EndMultiColumn();
}
void NoiseDialog::PopulateOrExchange( ShuttleGui & S )
{
S.StartMultiColumn(2, wxCENTER);
{
S.AddFixedText(_("Duration"), false);
if (mNoiseDurationT == NULL)
{
mNoiseDurationT = new
TimeTextCtrl(this,
wxID_ANY,
wxT(""),
nDuration,
44100,
wxDefaultPosition,
wxDefaultSize,
true);
/* use this instead of "seconds" because if a selection is passed to
* the effect, I want it (nDuration) to be used as the duration, and
* with "seconds" this does not always work properly. For example,
* it rounds down to zero... */
mNoiseDurationT->SetFormatString(mNoiseDurationT->GetBuiltinFormat(nIsSelection==true?(wxT("hh:mm:ss + samples")):(wxT("seconds"))));
mNoiseDurationT->EnableMenu();
}
S.AddWindow(mNoiseDurationT);
S.TieTextBox(_("Amplitude (0-1)"), nAmplitude, 10);
S.TieChoice(_("Noise type"), nType, nTypeList);
S.SetSizeHints(-1, -1);
}
S.EndMultiColumn();
}
void MidiIOPrefs::PopulateOrExchange( ShuttleGui & S ) {
wxArrayString empty;
S.SetBorder(2);
S.StartStatic(_("Interface"));
{
S.StartMultiColumn(2);
{
S.Id(HostID);
mHost = S.TieChoice(_("Host") + wxString(wxT(":")),
wxT("/MidiIO/Host"),
wxT(""),
mHostNames,
mHostLabels);
S.SetSizeHints(mHostNames);
S.AddPrompt(_("Using:"));
S.AddFixedText(wxString(Pa_GetVersionText(), wxConvLocal));
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Playback"));
{
S.StartMultiColumn(2);
{
S.Id(PlayID);
mPlay = S.AddChoice(_("Device") + wxString(wxT(":")),
wxEmptyString,
&empty);
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Recording"));
{
S.StartMultiColumn(2);
{
S.Id(RecordID);
mRecord = S.AddChoice(_("Device") + wxString(wxT(":")),
wxEmptyString,
&empty);
S.Id(ChannelsID);
/*
mChannels = S.AddChoice(_("Channels") + wxString(wxT(":")),
wxEmptyString,
&empty);
*/
}
S.EndMultiColumn();
}
S.EndStatic();
}
/// Normally in classes derived from PrefsPanel this function
/// is used both to populate the panel and to exchange data with it.
/// With KeyConfigPrefs all the exchanges are handled specially,
/// so this is only used in populating the panel.
void KeyConfigPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("Key Bindings"), 1);
{
S.StartHorizontalLay(wxALIGN_CENTRE, false);
{
S.Id(CategoryID);
mCat = S.AddChoice(_("C&ategory:"),
mCats[0],
&mCats);
}
S.EndHorizontalLay();
mList = S.Id(CommandsListID).AddListControlReportMode();
mList->SetName(_("Key Bindings"));
S.StartThreeColumn();
{
if (!mKey) {
mKey = new wxTextCtrl(this,
CurrentComboID,
wxT(""),
wxDefaultPosition,
#if defined(__WXMAC__)
wxSize(300, -1));
#else
wxSize(210, -1));
#endif
mKey->Connect(wxEVT_KEY_DOWN,
wxKeyEventHandler(KeyConfigPrefs::OnCaptureKeyDown));
mKey->Connect(wxEVT_CHAR,
wxKeyEventHandler(KeyConfigPrefs::OnCaptureChar));
}
S.AddWindow(mKey);
/* i18n-hint: (verb)*/
S.Id(SetButtonID).AddButton(_("Set"));
S.Id(ClearButtonID).AddButton(_("Cl&ear"));
}
S.EndThreeColumn();
#if defined(__WXMAC__)
S.AddFixedText(_("Note: Pressing Cmd+Q will quit. All other keys are valid."));
#endif
S.StartThreeColumn();
{
S.Id(ImportButtonID).AddButton(_("&Import..."));
S.Id(ExportButtonID).AddButton(_("&Export..."));
S.Id(AssignDefaultsButtonID).AddButton(_("&Defaults"));
}
S.EndThreeColumn();
}
void ModulePrefs::PopulateOrExchange(ShuttleGui & S)
{
wxArrayString StatusChoices;
StatusChoices.Add( _("Disabled" ) );
StatusChoices.Add( _("Enabled" ) );
StatusChoices.Add( _("Ask" ) );
StatusChoices.Add( _("Failed" ) );
StatusChoices.Add( _("New" ) );
S.SetBorder(2);
S.StartStatic(wxT(""));
{
S.AddFixedText(_("These are experimental modules. Enable them only if you've read the Audacity Manual\nand know what you are doing.") );
S.AddFixedText(wxString(wxT(" ")) + _("'Ask' means Audacity will ask if you want to load the module each time it starts.") );
S.AddFixedText(wxString(wxT(" ")) + _("'Failed' means Audacity thinks the module is broken and won't run it.") );
S.AddFixedText(wxString(wxT(" ")) + _("'New' means no choice has been made yet.") );
S.AddFixedText(_("Changes to these settings only take effect when Audacity starts up."));
S.StartScroller();
{
S.StartMultiColumn( 2 );
int i;
for(i=0;i<(int)mModules.GetCount();i++)
S.TieChoice( mModules[i], mStatuses[i], &StatusChoices );
S.EndMultiColumn();
}
if( mModules.GetCount() < 1 )
{
S.AddFixedText( _("No modules were found") );
}
S.EndScroller();
}
S.EndStatic();
}
void DirectoriesPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("Temporary files directory"));
{
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol(1);
S.Id(TempDirID);
mTempDir = S.TieTextBox(_("&Location:"),
wxT("/Directories/TempDir"),
wxT(""),
30);
S.Id(ChooseButtonID);
S.AddButton(_("C&hoose..."));
S.AddFixedText(_("Free Space:"));
mFreeSpace = S.AddVariableText(wxT(""));
}
S.EndMultiColumn();
}
S.EndStatic();
#ifdef DEPRECATED_AUDIO_CACHE
// See http://bugzilla.audacityteam.org/show_bug.cgi?id=545.
S.StartStatic(_("Audio cache"));
{
S.TieCheckBox(_("Play and/or record using &RAM (useful for slow drives)"),
wxT("/Directories/CacheBlockFiles"),
false);
S.StartTwoColumn();
{
S.TieNumericTextBox(_("Mi&nimum Free Memory (MB):"),
wxT("/Directories/CacheLowMem"),
16,
9);
}
S.EndTwoColumn();
S.AddVariableText(_("If the available system memory falls below this value, audio will no longer\nbe cached in memory and will be written to disk."))->Wrap(600);
}
S.EndStatic();
#endif // DEPRECATED_AUDIO_CACHE
}
/// Populates more complex dialog that has a chirp.
void ToneGenDialog::PopulateOrExchangeExtended( ShuttleGui & S )
{
S.StartMultiColumn(2, wxCENTER);
{
S.TieChoice(_("Waveform:"), waveform, waveforms);
S.SetSizeHints(-1, -1);
}
S.EndMultiColumn();
S.StartMultiColumn(3, wxCENTER);
{
S.AddFixedText(wxT(""));
S.AddTitle(_("Start"));
S.AddTitle(_("End"));
// The added colon to improve visual consistency was placed outside
// the translatable strings to avoid breaking translations close to 2.0.
// TODO: Make colon part of the translatable string after 2.0.
S.TieNumericTextBox(_("Frequency (Hz)") + wxString(wxT(":")), frequency[0], 10)->SetName(_("Frequency Hertz Start"));
S.TieNumericTextBox(wxT(""), frequency[1], 10)->SetName(_("Frequency Hertz End"));
S.TieNumericTextBox(_("Amplitude (0-1)") + wxString(wxT(":")), amplitude[0], 10)->SetName(_("Amplitude Start"));
S.TieNumericTextBox(wxT(""), amplitude[1], 10)->SetName(_("Amplitude End"));
}
S.EndMultiColumn();
S.StartMultiColumn(2, wxCENTER);
{
S.TieChoice(_("Interpolation:"), interpolation, interpolations);
S.AddPrompt(_("Duration") + wxString(wxT(":")));
if (mToneDurationT == NULL)
{
mToneDurationT = new
TimeTextCtrl(this,
wxID_ANY,
wxT(""),
mDuration,
mEffect->mProjectRate,
wxDefaultPosition,
wxDefaultSize,
true);
mToneDurationT->SetName(_("Duration"));
mToneDurationT->SetFormatString(mToneDurationT->GetBuiltinFormat(isSelection==true?(_("hh:mm:ss + samples")):(_("seconds"))));
mToneDurationT->EnableMenu();
}
S.AddWindow(mToneDurationT);
}
S.EndMultiColumn();
}
void DirectoriesPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("Temporary files directory"));
{
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol(1);
S.Id(TempDirID);
mTempDir = S.TieTextBox(_("Location:"),
wxT("/Directories/TempDir"),
wxT(""),
30);
S.Id(ChooseButtonID);
S.AddButton(_("Choose..."));
S.AddFixedText(_("Free Space:"));
mFreeSpace = S.AddVariableText(wxT(""));
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Audio cache"));
{
S.TieCheckBox(_("Play and/or record using RAM (useful for slow drives)"),
wxT("/Directories/CacheBlockFiles"),
false);
S.StartTwoColumn();
{
S.TieTextBox(_("Minimum Free Memory (MB):"),
wxT("/Directories/CacheLowMem"),
16,
9);
}
S.EndTwoColumn();
S.AddVariableText(_("If the available system memory falls below this value, audio will no longer\nbe cached in memory and will be written to disk."))->Wrap(600);
}
S.EndStatic();
}
void ModulePrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("Enable these Modules (if present), next time Audacity is started"));
{
S.AddFixedText(_("These are experimental. Enable them only if you've read the manual\nand know what you are doing.") );
S.TieCheckBox(_("mod-&script-pipe"),
wxT("/Module/mod-script-pipe"),
false);
S.TieCheckBox(_("mod-&nyq-bench"),
wxT("/Module/mod-nyq-bench"),
false);
S.TieCheckBox(_("mod-&track-panel"),
wxT("/Module/mod-track-panel"),
false);
}
S.EndStatic();
}
/// Normally in classes derived from PrefsPanel this function
/// is used both to populate the panel and to exchange data with it.
/// With KeyConfigPrefs all the exchanges are handled specially,
/// so this is only used in populating the panel.
void KeyConfigPrefs::PopulateOrExchange( ShuttleGui & S )
{
S.StartStatic( _("Key Bindings"), 1 );
mList = S.Id( CommandsListID ).AddListControlReportMode();
S.StartHorizontalLay( wxALIGN_LEFT, 0);
{
// LLL: Moved here from Populate. On the Mac, the control
// would not accept focus when using the mouse, but it
// would when tabbing to the field. Not really sure
// why...just glad it works now. :-)
// The SysKeyText ctrl is so special that we aren't
// going to include it into Audacity's version of ShuttleGui.
// So instead we create it here, and we can add it into
// the sizer scheme later...
mCurrentComboText = new SysKeyTextCtrl(
this, CurrentComboID, wxT(""),
wxDefaultPosition, wxSize(115, -1), 0 );
// AddWindow is a generic 'Add' for ShuttleGui.
// It allows us to add 'foreign' controls.
S.AddWindow( mCurrentComboText )->MoveAfterInTabOrder( mList );
S.Id( SetButtonID ).AddButton( _("S&et"));
S.Id( ClearButtonID ).AddButton( _("&Clear"));
}
S.EndHorizontalLay();
#ifdef __WXMAC__
S.AddFixedText( _("Note: Pressing Cmd+Q will quit. All other keys are valid."));
#endif
S.StartHorizontalLay( wxALIGN_LEFT, 0);
{
S.Id( AssignDefaultsButtonID ).AddButton( _("&Defaults"));
S.Id( SaveButtonID ).AddButton( _("&Save..."));
S.Id( LoadButtonID ).AddButton( _("&Load..."));
}
S.EndHorizontalLay();
S.EndStatic();
return;
}
/// Normally in classes derived from PrefsPanel this function
/// is used both to populate the panel and to exchange data with it.
/// With KeyConfigPrefs all the exchanges are handled specially,
/// so this is only used in populating the panel.
void KeyConfigPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("Key Bindings"), 1);
{
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol(1);
S.StartHorizontalLay(wxALIGN_LEFT|wxALIGN_CENTER_VERTICAL, 0);
{
S.AddTitle(_("View by:"));
S.StartRadioButtonGroup(wxT("/Prefs/KeyConfig/ViewBy"), wxT("tree"));
{
mViewByTree = S.Id(ViewByTreeID).TieRadioButton(_("&Tree"), wxT("tree"));
mViewByTree->SetName(_("View by tree"));
mViewByName = S.Id(ViewByNameID).TieRadioButton(_("&Name"), wxT("name"));
mViewByName->SetName(_("View by name"));
mViewByKey = S.Id(ViewByKeyID).TieRadioButton(_("&Key"), wxT("key"));
mViewByKey->SetName(_("View by key"));
}
S.EndRadioButtonGroup();
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxALIGN_CENTER|wxALIGN_CENTER_VERTICAL, 0);
{
// just a spacer
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxALIGN_RIGHT|wxALIGN_CENTER_VERTICAL, 0);
{
mFilterLabel = S.AddVariableText(_("Searc&h:"));
if (!mFilter) {
mFilter = safenew wxTextCtrl(this,
FilterID,
wxT(""),
wxDefaultPosition,
#if defined(__WXMAC__)
wxSize(300, -1),
#else
wxSize(210, -1),
#endif
wxTE_PROCESS_ENTER);
mFilter->SetName(wxStripMenuCodes(mFilterLabel->GetLabel()));
mFilter->Connect(wxEVT_KEY_DOWN,
wxKeyEventHandler(KeyConfigPrefs::OnFilterKeyDown),
NULL,
this);
mFilter->Connect(wxEVT_CHAR,
wxKeyEventHandler(KeyConfigPrefs::OnFilterChar),
NULL,
this);
}
S.AddWindow(mFilter, wxALIGN_NOT | wxALIGN_LEFT);
}
S.EndHorizontalLay();
}
S.EndThreeColumn();
S.AddSpace(-1, 2);
S.StartHorizontalLay(wxEXPAND, 1);
{
if (!mView) {
mView = safenew KeyView(this, CommandsListID);
mView->SetName(_("Bindings"));
}
S.Prop(true);
S.AddWindow(mView, wxEXPAND);
}
S.EndHorizontalLay();
S.StartThreeColumn();
{
if (!mKey) {
mKey = safenew wxTextCtrl(this,
CurrentComboID,
wxT(""),
wxDefaultPosition,
#if defined(__WXMAC__)
wxSize(300, -1),
#else
wxSize(210, -1),
#endif
wxTE_PROCESS_ENTER);
mKey->SetName(_("Short cut"));
mKey->Connect(wxEVT_KEY_DOWN,
wxKeyEventHandler(KeyConfigPrefs::OnHotkeyKeyDown),
NULL,
this);
mKey->Connect(wxEVT_CHAR,
wxKeyEventHandler(KeyConfigPrefs::OnHotkeyChar),
NULL,
this);
mKey->Connect(wxEVT_KILL_FOCUS,
wxFocusEventHandler(KeyConfigPrefs::OnHotkeyKillFocus),
NULL,
this);
}
S.AddWindow(mKey);
/* i18n-hint: (verb)*/
mSet = S.Id(SetButtonID).AddButton(_("&Set"));
mClear = S.Id(ClearButtonID).AddButton(_("Cl&ear"));
}
S.EndThreeColumn();
#if defined(__WXMAC__)
S.AddFixedText(_("Note: Pressing Cmd+Q will quit. All other keys are valid."));
#endif
S.StartThreeColumn();
{
S.Id(ImportButtonID).AddButton(_("&Import..."));
S.Id(ExportButtonID).AddButton(_("&Export..."));
S.Id(AssignDefaultsButtonID).AddButton(_("&Defaults"));
}
S.EndThreeColumn();
}
S.EndStatic();
// Need to layout so that the KeyView is properly sized before populating.
// Otherwise, the initial selection is not scrolled into view.
Layout();
}
void EffectToneGen::PopulateOrExchange(ShuttleGui & S)
{
wxTextCtrl *t;
S.StartMultiColumn(2, wxCENTER);
{
wxChoice *c = S.AddChoice(_("Waveform:"), wxT(""), &mWaveforms);
c->SetValidator(wxGenericValidator(&mWaveform));
if (mChirp)
{
S.AddFixedText(wxT(""));
S.StartHorizontalLay(wxEXPAND);
{
S.StartHorizontalLay(wxLEFT, 50);
{
S.AddTitle(_("Start"));
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxLEFT, 50);
{
S.AddTitle(_("End"));
}
S.EndHorizontalLay();
}
S.EndHorizontalLay();
S.AddPrompt(_("Frequency (Hz):"));
S.StartHorizontalLay(wxEXPAND);
{
S.StartHorizontalLay(wxLEFT, 50);
{
FloatingPointValidator<double> vldStartFreq(6, &mFrequency[0], NUM_VAL_NO_TRAILING_ZEROES);
vldStartFreq.SetRange(MIN_StartFreq, GetActiveProject()->GetRate() / 2.0);
t = S.AddTextBox(wxT(""), wxT(""), 12);
t->SetName(_("Frequency Hertz Start"));
t->SetValidator(vldStartFreq);
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxLEFT, 50);
{
FloatingPointValidator<double> vldEndFreq(6, &mFrequency[1], NUM_VAL_NO_TRAILING_ZEROES);
vldEndFreq.SetRange(MIN_EndFreq, GetActiveProject()->GetRate() / 2.0);
t = S.AddTextBox(wxT(""), wxT(""), 12);
t->SetName(_("Frequency Hertz End"));
t->SetValidator(vldEndFreq);
}
S.EndHorizontalLay();
}
S.EndHorizontalLay();
S.AddPrompt(_("Amplitude (Hz):"));
S.StartHorizontalLay(wxEXPAND);
{
S.StartHorizontalLay(wxLEFT, 50);
{
FloatingPointValidator<double> vldStartAmp(6, &mAmplitude[0], NUM_VAL_NO_TRAILING_ZEROES);
vldStartAmp.SetRange(MIN_StartAmp, MAX_StartAmp);
t = S.AddTextBox(wxT(""), wxT(""), 12);
t->SetName(_("Amplitude Start"));
t->SetValidator(vldStartAmp);
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxLEFT, 50);
{
FloatingPointValidator<double> vldEndAmp(6, &mAmplitude[1], NUM_VAL_NO_TRAILING_ZEROES);
vldEndAmp.SetRange(MIN_EndAmp, MAX_EndAmp);
t = S.AddTextBox(wxT(""), wxT(""), 12);
t->SetName(_("Amplitude End"));
t->SetValidator(vldEndAmp);
}
S.EndHorizontalLay();
}
S.EndHorizontalLay();
c = S.AddChoice(_("Interpolation:"), wxT(""), &mInterpolations);
c->SetValidator(wxGenericValidator(&mInterpolation));
}
else
{
FloatingPointValidator<double> vldFrequency(6, &mFrequency[0], NUM_VAL_NO_TRAILING_ZEROES);
vldFrequency.SetRange(MIN_Frequency, GetActiveProject()->GetRate() / 2.0);
t = S.AddTextBox(_("Frequency (Hz):"), wxT(""), 12);
t->SetValidator(vldFrequency);
FloatingPointValidator<double> vldAmplitude(6, &mAmplitude[0], NUM_VAL_NO_TRAILING_ZEROES);
vldAmplitude.SetRange(MIN_Amplitude, MAX_Amplitude);
t = S.AddTextBox(_("Amplitude (0-1):"), wxT(""), 12);
t->SetValidator(vldAmplitude);
}
bool isSelection;
double duration = GetDuration(&isSelection);
S.AddPrompt(_("Duration:"));
mToneDurationT = new
NumericTextCtrl(NumericConverter::TIME,
S.GetParent(),
wxID_ANY,
isSelection ? _("hh:mm:ss + samples") : _("hh:mm:ss + milliseconds"),
duration,
mProjectRate,
wxDefaultPosition,
wxDefaultSize,
true);
mToneDurationT->SetName(_("Duration"));
mToneDurationT->EnableMenu();
S.AddWindow(mToneDurationT, wxALIGN_LEFT | wxALL);
}
S.EndMultiColumn();
return;
}
void AudioIOPrefs::PopulateOrExchange( ShuttleGui & S )
{
/// \todo
/// JKC: I think setting paths in gPrefs is bad practice.
/// Suppose we are using gPrefs from elsewhere at the same time?
/// Change these all to full paths?
gPrefs->SetPath(wxT("/AudioIO"));
S.SetBorder( 2 );
S.StartHorizontalLay(wxEXPAND, 0 );
S.StartStatic( _("Playback"),1 );
{
S.StartMultiColumn(2, wxEXPAND);
S.SetStretchyCol(1);
S.TieChoice( _("Device") + wxString(wxT(":")), wxT("PlaybackDevice"),
wxT(""), mmPlayNames, mmPlayLabels );
S.AddPrompt( _("Using:") );
wxString ver = _("Portaudio v");
#if USE_PORTAUDIO_V19
ver += wxT("19");
#else
ver += wxT("18");
#endif
S.AddFixedText( ver );
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic( _("Recording"), 1 );
{
S.StartMultiColumn(2, wxEXPAND);
S.SetStretchyCol(1);
S.TieChoice( _("Device") + wxString(wxT(":")), wxT("RecordingDevice"),
wxT(""), mmRecordNames, mmRecordLabels );
S.TieChoice( _("Channels") + wxString(wxT(":")), wxT("RecordChannels"),
2, mmChannelNames, mmChannelLabels );
S.EndMultiColumn();
}
S.EndStatic();
S.EndHorizontalLay();
S.StartStatic( _("Playthrough") );
{
S.TieCheckBox( _("&Play other tracks while recording new one"),
wxT("Duplex"),true);
#ifdef __MACOSX__
S.TieCheckBox( _("&Hardware Playthrough (Play new track while recording it)"),
wxT("Playthrough"),false);
#endif
S.TieCheckBox( _("&Software Playthrough (Play new track while recording it)"),
wxT("SWPlaythrough"),false);
}
S.EndStatic();
S.StartHorizontalLay( wxEXPAND, 0 );
S.StartStatic( _("Cut Preview"),1 );
{
S.StartThreeColumn();
S.TieTextBox( _("Play before cut region:"), wxT("CutPreviewBeforeLen"),1.0,9);
S.AddUnits( _("seconds") );
S.TieTextBox( _("Play after cut region:"),wxT("CutPreviewAfterLen"), 1.0,9);
S.AddUnits( _("seconds") );
S.EndThreeColumn();
}
S.EndStatic();
S.StartStatic( _("Latency"),1 );
{
S.StartThreeColumn();
#if USE_PORTAUDIO_V19
// only show the following controls if we use Portaudio v19, because
// for Portaudio v19 we always use default buffer sizes
S.TieTextBox( _("Audio to buffer:"),wxT("LatencyDuration"),100.0,9);
S.AddUnits( _("milliseconds") );
#endif
S.TieTextBox( _("Latency correction:"),wxT("LatencyCorrection"),0.0,9);
S.AddUnits( _("milliseconds") );
S.EndThreeColumn();
}
S.EndStatic();
S.EndHorizontalLay();
S.StartHorizontalLay( wxEXPAND, 0 );
S.StartStatic( _("Seek Time"),1 );
{
S.StartThreeColumn();
S.TieTextBox( _("Short period:"), wxT("SeekShortPeriod"),1.0,9);
S.AddUnits( _("seconds") );
S.TieTextBox( _("Long period:"),wxT("SeekLongPeriod"), 15.0,9);
S.AddUnits( _("seconds") );
S.EndThreeColumn();
}
S.EndStatic();
S.StartStatic( _("Effects Preview"),1 );
{
S.StartThreeColumn();
S.TieTextBox( _("Play when previewing:"), wxT("EffectsPreviewLen"), 3.0,9);
S.AddUnits( _("seconds") );
S.EndThreeColumn();
}
gPrefs->SetPath(wxT("/"));
}
void QualityPrefs::PopulateOrExchange( ShuttleGui & S )
{
S.SetBorder( 2 );
S.StartStatic(_("Sampling"),0 );
{
S.StartTwoColumn();
S.AddPrompt( _("Default Sample Rate:") );
DefineSampleRateControl( S ); // A tricky control.
S.TieChoice(_("Default Sample Format:"),
wxT("/SamplingRate/DefaultProjectSampleFormat"),
floatSample, mmSampleFormatNames, mmSampleFormatLabels );
// JKC For the old style of layout, uncomment the next line.
// #define OLD_STYLE_LAYOUT
// Once we've chosen which layout to use we'll remove the
// other one. (June/2006).
#ifdef OLD_STYLE_LAYOUT
S.TieChoice(_("Real-time sample rate converter:"),
wxT("/Quality/LibresampleSampleRateConverter"),
(int)0, mConverterNames, mConverterLabels),
S.TieChoice(_("High-quality sample rate converter:"),
wxT("/Quality/LibresampleHQSampleRateConverter"),
(int)1, mConverterNames, mConverterLabels),
S.TieChoice(_("Real-time dither:"),
wxT("/Quality/DitherAlgorithm"),
Dither::none, mmDitherNames, mmDitherLabels );
S.TieChoice(_("High-quality dither:"),
wxT("/Quality/HQDitherAlgorithm"),
Dither::shaped, mmDitherNames, mmDitherLabels );
#endif
S.EndTwoColumn();
}
S.EndStatic();
// The new style of layout has
// - columns for converter and dither.
// - rows for Real-time and High-quality.
#ifndef OLD_STYLE_LAYOUT
S.StartStatic( _("Conversion") );
{
// We use blank labels here and there to end up with
// a three column layout.
S.StartMultiColumn(3);
S.AddFixedText(wxT(""));
S.AddTitle(_("Sample Rate Converter" ));
S.AddTitle(_("Dither"));
S.TieChoice(_("Real-time:"),
wxT("/Quality/LibresampleSampleRateConverter"),
(int)0, mConverterNames, mConverterLabels),
S.TieChoice(wxT(""),
wxT("/Quality/DitherAlgorithm"),
Dither::none, mmDitherNames, mmDitherLabels );
S.TieChoice(_("High-quality:"),
wxT("/Quality/LibresampleHQSampleRateConverter"),
(int)1, mConverterNames, mConverterLabels),
S.TieChoice(wxT(""),
wxT("/Quality/HQDitherAlgorithm"),
Dither::shaped, mmDitherNames, mmDitherLabels );
S.EndMultiColumn();
}
S.EndStatic();
#endif
}
void EffectsPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("Enable Effects"));
{
#if USE_AUDIO_UNITS
S.TieCheckBox(_("Audio Unit"),
wxT("/AudioUnits/Enable"),
true);
#endif
// JKC: LADSPA, LV2, Nyquist, VST, VAMP should not be translated.
#if USE_LADSPA
S.TieCheckBox(wxT("&LADSPA"),
wxT("/Ladspa/Enable"),
true);
#endif
#if USE_LV2
S.TieCheckBox(wxT("LV&2"),
wxT("/LV2/Enable"),
true);
#endif
#if USE_NYQUIST
S.TieCheckBox(wxT("N&yquist"),
wxT("/Nyquist/Enable"),
true);
#endif
#if USE_VAMP
S.TieCheckBox(wxT("&VAMP"),
wxT("/VAMP/Enable"),
true);
#endif
#if USE_VST
S.TieCheckBox(wxT("V&ST"),
wxT("/VST/Enable"),
true);
#endif
S.AddFixedText(_("Restart Audacity to apply changes."));
}
S.EndStatic();
#if USE_AUDIO_UNITS
S.StartStatic(_("Audio Unit Effects"));
{
S.TieCheckBox(_("Display Audio Unit effects in Graphical Mode"),
wxT("/AudioUnits/GUI"),
true);
#if 0
S.TieCheckBox(_("Rescan VST effects next time Audacity is started"),
wxT("/VST/Rescan"),
false);
#endif
}
S.EndStatic();
#endif
#if USE_VST
S.StartStatic(_("VST Effects"));
{
S.TieCheckBox(_("&Display VST effects in Graphical Mode"),
wxT("/VST/GUI"),
true);
S.TieCheckBox(_("&Rescan VST effects next time Audacity is started"),
wxT("/VST/Rescan"),
false);
}
S.EndStatic();
#endif
#ifdef EXPERIMENTAL_EQ_SSE_THREADED
S.StartStatic(_("Instruction Set"));
{
S.TieCheckBox(_("&Use SSE/SSE2/.../AVX"),
wxT("/SSE/GUI"),
true);
}
S.EndStatic();
#endif
}
void EffectsPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("Enable"));
{
#if USE_LADSPA
S.TieCheckBox(_("LADSPA effects"),
wxT("/Ladspa/Enable"),
true);
#endif
#if USE_NYQUIST
S.TieCheckBox(_("Nyquist effects"),
wxT("/Nyquist/Enable"),
true);
#endif
#if USE_VAMP
S.TieCheckBox(_("VAMP effects"),
wxT("/VAMP/Enable"),
true);
#endif
S.AddFixedText(_("Restart Audacity to apply changes."));
}
S.EndStatic();
#if USE_AUDIO_UNITS
S.StartStatic(_("Audio Unit Effects"));
{
S.TieCheckBox(_("Enable Audio Unit effects"),
wxT("/AudioUnits/Enable"),
true);
S.TieCheckBox(_("Display Audio Unit effects in graphical mode"),
wxT("/AudioUnits/GUI"),
true);
#if 0
S.TieCheckBox(_("Rescan VST effects next time Audacity is started"),
wxT("/VST/Rescan"),
false);
#endif
}
S.EndStatic();
#endif
#if USE_VST
S.StartStatic(_("VST Effects"));
{
S.TieCheckBox(_("Enable VST effects"),
wxT("/VST/Enable"),
true);
S.TieCheckBox(_("Display VST effects in graphical mode"),
wxT("/VST/GUI"),
true);
S.TieCheckBox(_("Rescan VST effects next time Audacity is started"),
wxT("/VST/Rescan"),
false);
}
S.EndStatic();
#endif
}
/// Create the dialog contents, or exchange data with it.
void ThemePrefs::PopulateOrExchange( ShuttleGui & S)
{
S.StartHorizontalLay(wxEXPAND,1);
S.StartVerticalLay(0);
S.StartStatic( _("Theme Cache - Images && Color"));
{
S.Id( idSaveThemeCache ).AddButton( _("Save Theme Cache"));
S.Id( idLoadThemeCache ).AddButton( _("Load Theme Cache"));
// This next button is only provided in Debug mode.
// It is for developers who are compiling Audacity themselves
// and who who wish to generate a new ThemeAsCeeCode.h and compile it in.
#ifdef __WXDEBUG__
// S.Id( idSaveThemeAsCode ).AddButton( wxT("Save Code" ));
S.Id( idSaveThemeAsCode ).AddButton( wxT("Output Sourcery" ));
#endif
S.Id( idReadThemeInternal ).AddButton( _("Defaults" ));
S.TieCheckBox( _("Load Theme Cache At Startup"),
wxT("/Theme/LoadAtStart"), false);
}
S.EndStatic();
// JKC: 'Ergonomic' details:
// Theme components are used much less frequently than
// the ImageCache. Yet it's easy to click them 'by mistake'.
//
// To reduce that risk, we use a separate box to separate them off.
// And choose text on the buttons that is shorter, making the
// buttons smaller and less tempting to click.
S.StartStatic( _("Individual Theme Files"),1);
{
S.Id( idSaveThemeComponents ).AddButton( _("Save Files"));
S.Id( idLoadThemeComponents ).AddButton( _("Load Files"));
}
S.EndStatic();
S.EndVerticalLay();
S.StartStatic( _("Info"), 1 );
{
S.AddFixedText(
_("Themability is an experimental feature.\n\n"
wxT("To try it out, click \"Save Theme Cache\" then\n" )
wxT("find and modify the images and colors in \n" )
wxT("ImageCacheVxx.png using an image editor such \n" )
wxT("as the Gimp.\n\n")
wxT("Click \"Load Theme Cache\" to load the changed images\n")
wxT("and colors back into Audacity.\n\n")
wxT("[Only the control toolbar and the colors on the \n")
wxT("wavetrack are currently affected, even though the\n")
wxT("image file shows other icons too.]\n"))
);
#ifdef __WXDEBUG__
S.AddFixedText(
_("You have compiled Audacity with an extra button, \n"
wxT("'Output Sourcery'. This will save a C version of \n")
wxT("the image cache that can be compiled in as a default.\n"))
);
#endif
S.AddFixedText(
_("If 'Load Theme Cache At Startup' is checked, then \n"
wxT("the Theme Cache will be loaded when the program \n")
wxT("starts up.\n\n")
wxT("Saving and loading individual theme files uses a \n")
wxT("separate file for each image, but is otherwise the \n")
wxT("same idea.\n\n"))
);
}
S.EndStatic();
}