/* Redraw the current graphic item during its creation
* Use this function to show a new outline, in begin command
*/
static void ShowNewEdgeModule( EDA_DRAW_PANEL* aPanel, wxDC* aDC, const wxPoint& aPosition,
bool aErase )
{
BASE_SCREEN* screen = aPanel->GetScreen();
EDGE_MODULE* edge = (EDGE_MODULE*) screen->GetCurItem();
if( edge == NULL )
return;
MODULE* module = (MODULE*) edge->GetParent();
// if( erase )
{
edge->Draw( aPanel, aDC, GR_XOR );
}
edge->SetEnd( aPanel->GetParent()->GetCrossHairPosition() );
// Update relative coordinate.
edge->SetEnd0( edge->GetEnd() - module->GetPosition() );
wxPoint pt( edge->GetEnd0() );
RotatePoint( &pt, -module->GetOrientation() );
edge->SetEnd0( pt );
edge->Draw( aPanel, aDC, GR_XOR );
module->CalculateBoundingBox();
}
int DRAWING_TOOL::DrawLine( const TOOL_EVENT& aEvent )
{
boost::optional<VECTOR2D> startingPoint;
if( m_editModules )
{
m_frame->SetToolID( ID_MODEDIT_LINE_TOOL, wxCURSOR_PENCIL, _( "Add graphic line" ) );
EDGE_MODULE* line = new EDGE_MODULE( m_board->m_Modules );
while( drawSegment( S_SEGMENT, reinterpret_cast<DRAWSEGMENT*&>( line ), startingPoint ) )
{
if( line )
{
m_frame->OnModify();
m_frame->SaveCopyInUndoList( m_board->m_Modules, UR_MODEDIT );
line->SetParent( m_board->m_Modules );
line->SetLocalCoord();
m_board->m_Modules->GraphicalItems().PushFront( line );
startingPoint = line->GetEnd();
}
else
{
startingPoint = boost::none;
}
line = new EDGE_MODULE( m_board->m_Modules );
}
}
else // !m_editModules case
{
m_frame->SetToolID( ID_PCB_ADD_LINE_BUTT, wxCURSOR_PENCIL, _( "Add graphic line" ) );
DRAWSEGMENT* line = new DRAWSEGMENT;
while( drawSegment( S_SEGMENT, line, startingPoint ) )
{
if( line )
{
m_board->Add( line );
m_frame->OnModify();
m_frame->SaveCopyInUndoList( line, UR_NEW );
startingPoint = line->GetEnd();
}
else
{
startingPoint = boost::none;
}
line = new DRAWSEGMENT;
}
}
m_frame->SetToolID( ID_NO_TOOL_SELECTED, wxCURSOR_DEFAULT, wxEmptyString );
return 0;
}
/* Move marked items, at new position = old position + offset
*/
void MoveMarkedItems( MODULE* module, wxPoint offset )
{
EDA_ITEM* item;
if( module == NULL )
return;
if( module->Reference().IsSelected() )
module->Reference().Move( offset );
if( module->Value().IsSelected() )
module->Value().Move( offset );
D_PAD* pad = module->Pads();
for( ; pad != NULL; pad = pad->Next() )
{
if( !pad->IsSelected() )
continue;
pad->SetPosition( pad->GetPosition() + offset );
pad->SetPos0( pad->GetPos0() + offset );
}
item = module->GraphicalItems();
for( ; item != NULL; item = item->Next() )
{
if( !item->IsSelected() )
continue;
switch( item->Type() )
{
case PCB_MODULE_TEXT_T:
static_cast<TEXTE_MODULE*>( item )->Move( offset );
break;
case PCB_MODULE_EDGE_T:
{
EDGE_MODULE* em = (EDGE_MODULE*) item;
em->SetStart( em->GetStart() + offset );
em->SetEnd( em->GetEnd() + offset );
em->SetStart0( em->GetStart0() + offset );
em->SetEnd0( em->GetEnd0() + offset );
}
break;
default:
;
}
}
ClearMarkItems( module );
}
/* Move marked items, at new position = old position + offset
*/
void MoveMarkedItems( MODULE* module, wxPoint offset )
{
EDA_ITEM* item;
if( module == NULL )
return;
D_PAD* pad = module->Pads();
for( ; pad != NULL; pad = pad->Next() )
{
if( !pad->IsSelected() )
continue;
pad->SetPosition( pad->GetPosition() + offset );
pad->SetPos0( pad->GetPos0() + offset );
}
item = module->GraphicalItems();
for( ; item != NULL; item = item->Next() )
{
if( !item->IsSelected() )
continue;
switch( item->Type() )
{
case PCB_MODULE_TEXT_T:
{
TEXTE_MODULE* tm = (TEXTE_MODULE*) item;
tm->Offset( offset );
tm->SetPos0( tm->GetPos0() + offset );
}
break;
case PCB_MODULE_EDGE_T:
{
EDGE_MODULE* em = (EDGE_MODULE*) item;
em->SetStart( em->GetStart() + offset );
em->SetEnd( em->GetEnd() + offset );
em->SetStart0( em->GetStart0() + offset );
em->SetEnd0( em->GetEnd0() + offset );
}
break;
default:
;
}
item->ClearFlags();
}
}
MODULE* MWAVE::CreateMicrowaveInductor( INDUCTOR_PATTERN& inductorPattern,
PCB_EDIT_FRAME* aPcbFrame, wxString& aErrorMessage )
{
/* Build a microwave inductor footprint.
* - Length Mself.lng
* - Extremities Mself.m_Start and Mself.m_End
* We must determine:
* Mself.nbrin = number of segments perpendicular to the direction
* (The coil nbrin will demicercles + 1 + 2 1 / 4 circle)
* Mself.lbrin = length of a strand
* Mself.radius = radius of rounded parts of the coil
* Mself.delta = segments extremities connection between him and the coil even
*
* The equations are
* Mself.m_Size.x = 2 * Mself.radius + Mself.lbrin
* Mself.m_Size.y * Mself.delta = 2 + 2 * Mself.nbrin * Mself.radius
* Mself.lng = 2 * Mself.delta / / connections to the coil
+ (Mself.nbrin-2) * Mself.lbrin / / length of the strands except 1st and last
+ (Mself.nbrin 1) * (PI * Mself.radius) / / length of rounded
* Mself.lbrin + / 2 - Melf.radius * 2) / / length of 1st and last bit
*
* The constraints are:
* Nbrin >= 2
* Mself.radius < Mself.m_Size.x
* Mself.m_Size.y = Mself.radius * 4 + 2 * Mself.raccord
* Mself.lbrin> Mself.radius * 2
*
* The calculation is conducted in the following way:
* Initially:
* Nbrin = 2
* Radius = 4 * m_Size.x (arbitrarily fixed value)
* Then:
* Increasing the number of segments to the desired length
* (Radius decreases if necessary)
*/
D_PAD* pad;
int ll;
wxString msg;
auto pt = inductorPattern.m_End - inductorPattern.m_Start;
int min_len = KiROUND( EuclideanNorm( pt ) );
inductorPattern.m_length = min_len;
// Enter the desired length.
msg = StringFromValue( g_UserUnit, inductorPattern.m_length );
wxTextEntryDialog dlg( nullptr, wxEmptyString, _( "Length of Trace:" ), msg );
if( dlg.ShowModal() != wxID_OK )
return nullptr; // canceled by user
msg = dlg.GetValue();
inductorPattern.m_length = ValueFromString( g_UserUnit, msg );
// Control values (ii = minimum length)
if( inductorPattern.m_length < min_len )
{
aErrorMessage = _( "Requested length < minimum length" );
return nullptr;
}
// Calculate the elements.
std::vector <wxPoint> buffer;
ll = BuildCornersList_S_Shape( buffer, inductorPattern.m_Start,
inductorPattern.m_End, inductorPattern.m_length,
inductorPattern.m_Width );
if( !ll )
{
aErrorMessage = _( "Requested length too large" );
return nullptr;
}
// Generate footprint. the value is also used as footprint name.
msg = "L";
wxTextEntryDialog cmpdlg( nullptr, wxEmptyString, _( "Component Value:" ), msg );
cmpdlg.SetTextValidator( FILE_NAME_CHAR_VALIDATOR( &msg ) );
if( ( cmpdlg.ShowModal() != wxID_OK ) || msg.IsEmpty() )
return nullptr; // Aborted by user
MODULE* module = aPcbFrame->CreateNewModule( msg );
// here the module is already in the BOARD, CreateNewModule() does that.
module->SetFPID( LIB_ID( wxString( "mw_inductor" ) ) );
module->SetAttributes( MOD_VIRTUAL | MOD_CMS );
module->ClearFlags();
module->SetPosition( inductorPattern.m_End );
// Generate segments
for( unsigned jj = 1; jj < buffer.size(); jj++ )
{
EDGE_MODULE* PtSegm;
PtSegm = new EDGE_MODULE( module );
PtSegm->SetStart( buffer[jj - 1] );
PtSegm->SetEnd( buffer[jj] );
PtSegm->SetWidth( inductorPattern.m_Width );
PtSegm->SetLayer( module->GetLayer() );
PtSegm->SetShape( S_SEGMENT );
PtSegm->SetStart0( PtSegm->GetStart() - module->GetPosition() );
PtSegm->SetEnd0( PtSegm->GetEnd() - module->GetPosition() );
module->GraphicalItemsList().PushBack( PtSegm );
}
// Place a pad on each end of coil.
pad = new D_PAD( module );
module->PadsList().PushFront( pad );
pad->SetName( "1" );
pad->SetPosition( inductorPattern.m_End );
pad->SetPos0( pad->GetPosition() - module->GetPosition() );
pad->SetSize( wxSize( inductorPattern.m_Width, inductorPattern.m_Width ) );
pad->SetLayerSet( LSET( module->GetLayer() ) );
pad->SetAttribute( PAD_ATTRIB_SMD );
pad->SetShape( PAD_SHAPE_CIRCLE );
D_PAD* newpad = new D_PAD( *pad );
module->PadsList().Insert( newpad, pad->Next() );
pad = newpad;
pad->SetName( "2" );
pad->SetPosition( inductorPattern.m_Start );
pad->SetPos0( pad->GetPosition() - module->GetPosition() );
// Modify text positions.
wxPoint refPos( ( inductorPattern.m_Start.x + inductorPattern.m_End.x ) / 2,
( inductorPattern.m_Start.y + inductorPattern.m_End.y ) / 2 );
wxPoint valPos = refPos;
refPos.y -= module->Reference().GetTextSize().y;
module->Reference().SetPosition( refPos );
valPos.y += module->Value().GetTextSize().y;
module->Value().SetPosition( valPos );
module->CalculateBoundingBox();
return module;
}
/** Rotate marked items, refer to a rotation point at position offset
* Note: because this function is used in global transform,
* if force_all is true, all items will be rotated
*/
void RotateMarkedItems( MODULE* module, wxPoint offset, bool force_all )
{
#define ROTATE( z ) RotatePoint( (&z), offset, 900 )
if( module == NULL )
return;
for( D_PAD* pad = module->Pads(); pad; pad = pad->Next() )
{
if( !pad->IsSelected() && !force_all )
continue;
wxPoint pos = pad->GetPosition();
ROTATE( pos );
pad->SetPosition( pos );
pad->SetPos0( pad->GetPosition() );
pad->SetOrientation( pad->GetOrientation() + 900 );
}
for( EDA_ITEM* item = module->GraphicalItems(); item; item = item->Next() )
{
if( !item->IsSelected() && !force_all)
continue;
switch( item->Type() )
{
case PCB_MODULE_EDGE_T:
{
EDGE_MODULE* em = (EDGE_MODULE*) item;
wxPoint tmp = em->GetStart();
ROTATE( tmp );
em->SetStart( tmp );
em->SetStart0( tmp );
tmp = em->GetEnd();
ROTATE( tmp );
em->SetEnd( tmp );
em->SetEnd0( tmp );
}
break;
case PCB_MODULE_TEXT_T:
{
TEXTE_MODULE* tm = (TEXTE_MODULE*) item;
wxPoint pos = tm->GetTextPosition();
ROTATE( pos );
tm->SetTextPosition( pos );
tm->SetPos0( tm->GetTextPosition() );
tm->SetOrientation( tm->GetOrientation() + 900 );
}
break;
default:
;
}
item->ClearFlags();
}
}
/**
* Function PlaceCells
* Initialize the matrix routing by setting obstacles for each occupied cell
* a cell set to HOLE is an obstacle for tracks and vias
* a cell set to VIA_IMPOSSIBLE is an obstacle for vias only.
* a cell set to CELL_is_EDGE is a frontier.
* Tracks and vias having the same net code as net_code are skipped
* (htey do not are obstacles)
*
* For single-sided Routing 1:
* BOTTOM side is used, and Route_Layer_BOTTOM = Route_Layer_TOP
*
* If flag == FORCE_PADS: all pads will be put in matrix as obstacles.
*/
void PlaceCells( BOARD* aPcb, int net_code, int flag )
{
int ux0 = 0, uy0 = 0, ux1, uy1, dx, dy;
int marge, via_marge;
LAYER_MSK layerMask;
// use the default NETCLASS?
NETCLASS* nc = aPcb->m_NetClasses.GetDefault();
int trackWidth = nc->GetTrackWidth();
int clearance = nc->GetClearance();
int viaSize = nc->GetViaDiameter();
marge = clearance + (trackWidth / 2);
via_marge = clearance + (viaSize / 2);
// Place PADS on matrix routing:
for( unsigned i = 0; i < aPcb->GetPadCount(); ++i )
{
D_PAD* pad = aPcb->GetPad( i );
if( net_code != pad->GetNet() || (flag & FORCE_PADS) )
{
::PlacePad( pad, HOLE, marge, WRITE_CELL );
}
::PlacePad( pad, VIA_IMPOSSIBLE, via_marge, WRITE_OR_CELL );
}
// Place outlines of modules on matrix routing, if they are on a copper layer
// or on the edge layer
TRACK tmpSegm( NULL ); // A dummy track used to create segments.
for( MODULE* module = aPcb->m_Modules; module; module = module->Next() )
{
for( BOARD_ITEM* item = module->GraphicalItems(); item; item = item->Next() )
{
switch( item->Type() )
{
case PCB_MODULE_EDGE_T:
{
EDGE_MODULE* edge = (EDGE_MODULE*) item;
tmpSegm.SetLayer( edge->GetLayer() );
if( tmpSegm.GetLayer() == EDGE_N )
tmpSegm.SetLayer( UNDEFINED_LAYER );
tmpSegm.SetStart( edge->GetStart() );
tmpSegm.SetEnd( edge->GetEnd() );
tmpSegm.SetShape( edge->GetShape() );
tmpSegm.SetWidth( edge->GetWidth() );
tmpSegm.m_Param = edge->GetAngle();
tmpSegm.SetNet( -1 );
TraceSegmentPcb( &tmpSegm, HOLE, marge, WRITE_CELL );
TraceSegmentPcb( &tmpSegm, VIA_IMPOSSIBLE, via_marge, WRITE_OR_CELL );
}
break;
default:
break;
}
}
}
// Place board outlines and texts on copper layers:
for( BOARD_ITEM* item = aPcb->m_Drawings; item; item = item->Next() )
{
switch( item->Type() )
{
case PCB_LINE_T:
{
DRAWSEGMENT* DrawSegm;
int type_cell = HOLE;
DrawSegm = (DRAWSEGMENT*) item;
tmpSegm.SetLayer( DrawSegm->GetLayer() );
if( DrawSegm->GetLayer() == EDGE_N )
{
tmpSegm.SetLayer( UNDEFINED_LAYER );
type_cell |= CELL_is_EDGE;
}
tmpSegm.SetStart( DrawSegm->GetStart() );
tmpSegm.SetEnd( DrawSegm->GetEnd() );
tmpSegm.SetShape( DrawSegm->GetShape() );
tmpSegm.SetWidth( DrawSegm->GetWidth() );
tmpSegm.m_Param = DrawSegm->GetAngle();
tmpSegm.SetNet( -1 );
TraceSegmentPcb( &tmpSegm, type_cell, marge, WRITE_CELL );
}
break;
case PCB_TEXT_T:
{
TEXTE_PCB* PtText;
PtText = (TEXTE_PCB*) item;
if( PtText->GetText().Length() == 0 )
break;
EDA_RECT textbox = PtText->GetTextBox( -1 );
ux0 = textbox.GetX();
uy0 = textbox.GetY();
dx = textbox.GetWidth();
dy = textbox.GetHeight();
/* Put bounding box (rectangle) on matrix */
dx /= 2;
dy /= 2;
ux1 = ux0 + dx;
uy1 = uy0 + dy;
ux0 -= dx;
uy0 -= dy;
layerMask = GetLayerMask( PtText->GetLayer() );
TraceFilledRectangle( ux0 - marge, uy0 - marge, ux1 + marge,
uy1 + marge, PtText->GetOrientation(),
layerMask, HOLE, WRITE_CELL );
TraceFilledRectangle( ux0 - via_marge, uy0 - via_marge,
ux1 + via_marge, uy1 + via_marge,
PtText->GetOrientation(),
layerMask, VIA_IMPOSSIBLE, WRITE_OR_CELL );
}
break;
default:
break;
}
}
/* Put tracks and vias on matrix */
for( TRACK* track = aPcb->m_Track; track; track = track->Next() )
{
if( net_code == track->GetNet() )
continue;
TraceSegmentPcb( track, HOLE, marge, WRITE_CELL );
TraceSegmentPcb( track, VIA_IMPOSSIBLE, via_marge, WRITE_OR_CELL );
}
}
bool DIALOG_MODEDIT_FP_BODY_ITEM_PROPERTIES::TransferDataToWindow()
{
// Set unit symbol
wxStaticText* texts_unit[] =
{
m_StartPointXUnit,
m_StartPointYUnit,
m_EndPointXUnit,
m_EndPointYUnit,
m_ThicknessTextUnit,
m_DefaulThicknessTextUnit,
};
for( size_t ii = 0; ii < DIM( texts_unit ); ii++ )
{
texts_unit[ii]->SetLabel( GetAbbreviatedUnitsLabel() );
}
wxString msg;
// Change texts according to the segment shape:
switch( m_item->GetShape() )
{
case S_CIRCLE:
SetTitle( _( "Circle Properties" ) );
m_StartPointXLabel->SetLabel( _( "Center X" ) );
m_StartPointYLabel->SetLabel( _( "Center Y" ) );
m_EndPointXLabel->SetLabel( _( "Point X" ) );
m_EndPointYLabel->SetLabel( _( "Point Y" ) );
m_AngleText->Show( false );
m_AngleCtrl->Show( false );
m_AngleUnit->Show( false );
break;
case S_ARC:
SetTitle( _( "Arc Properties" ) );
m_StartPointXLabel->SetLabel( _( "Center X" ) );
m_StartPointYLabel->SetLabel( _( "Center Y" ) );
m_EndPointXLabel->SetLabel( _( "Start Point X" ) );
m_EndPointYLabel->SetLabel( _( "Start Point Y" ) );
m_AngleValue = m_item->GetAngle() / 10.0;
break;
case S_SEGMENT:
SetTitle( _( "Line Segment Properties" ) );
// Fall through.
default:
m_AngleText->Show( false );
m_AngleCtrl->Show( false );
m_AngleUnit->Show( false );
break;
}
PutValueInLocalUnits( *m_Center_StartXCtrl, m_item->GetStart().x );
PutValueInLocalUnits( *m_Center_StartYCtrl, m_item->GetStart().y );
PutValueInLocalUnits( *m_EndX_Radius_Ctrl, m_item->GetEnd().x );
PutValueInLocalUnits( *m_EndY_Ctrl, m_item->GetEnd().y );
PutValueInLocalUnits( *m_ThicknessCtrl, m_item->GetWidth() );
PutValueInLocalUnits( *m_DefaultThicknessCtrl, m_brdSettings.m_ModuleSegmentWidth );
// Configure the layers list selector
m_LayerSelectionCtrl->SetLayersHotkeys( false );
m_LayerSelectionCtrl->SetLayerSet( LSET::InternalCuMask().set( Edge_Cuts ) );
m_LayerSelectionCtrl->SetBoardFrame( m_parent );
m_LayerSelectionCtrl->Resync();
if( m_LayerSelectionCtrl->SetLayerSelection( m_item->GetLayer() ) < 0 )
{
wxMessageBox( _( "This item was on an unknown layer.\n"
"It has been moved to the front silk screen layer. Please fix it." ) );
m_LayerSelectionCtrl->SetLayerSelection( F_SilkS );
}
return DIALOG_GRAPHIC_ITEM_PROPERTIES_BASE::TransferDataToWindow();
}
void DIALOG_MODEDIT_FP_BODY_ITEM_PROPERTIES::initDlg()
/* Initialize messages and values in text control,
* according to the item parameters values
*/
{
SetFocus();
m_StandardButtonsSizerOK->SetDefault();
// Set unit symbol
wxStaticText * texts_unit[] =
{
m_StartPointXUnit,
m_StartPointYUnit,
m_EndPointXUnit,
m_EndPointYUnit,
m_ThicknessTextUnit,
m_DefaulThicknessTextUnit,
NULL
};
for( int ii = 0; ; ii++ )
{
if( texts_unit[ii] == NULL )
break;
texts_unit[ii]->SetLabel( GetAbbreviatedUnitsLabel() );
}
wxString msg;
// Change texts according to the segment shape:
switch ( m_item->GetShape() )
{
case S_CIRCLE:
m_StartPointXLabel->SetLabel(_("Center X"));
m_StartPointYLabel->SetLabel(_("Center Y"));
m_EndPointXLabel->SetLabel(_("Point X"));
m_EndPointYLabel->SetLabel(_("Point Y"));
m_Angle_Text->Show(false);
m_Angle_Ctrl->Show(false);
m_AngleUnit->Show(false);
break;
case S_ARC:
m_StartPointXLabel->SetLabel(_("Center X"));
m_StartPointYLabel->SetLabel(_("Center Y"));
m_EndPointXLabel->SetLabel(_("Start Point X"));
m_EndPointYLabel->SetLabel(_("Start Point Y"));
// Here the angle is a double, but the UI is still working
// with integers
msg << int( m_item->GetAngle() );
m_Angle_Ctrl->SetValue(msg);
break;
default:
m_Angle_Text->Show(false);
m_Angle_Ctrl->Show(false);
m_AngleUnit->Show(false);
break;
}
PutValueInLocalUnits( *m_Center_StartXCtrl, m_item->GetStart().x );
PutValueInLocalUnits( *m_Center_StartYCtrl, m_item->GetStart().y );
PutValueInLocalUnits( *m_EndX_Radius_Ctrl, m_item->GetEnd().x );
PutValueInLocalUnits( *m_EndY_Ctrl, m_item->GetEnd().y );
PutValueInLocalUnits( *m_ThicknessCtrl, m_item->GetWidth() );
PutValueInLocalUnits( *m_DefaultThicknessCtrl, m_brdSettings.m_ModuleSegmentWidth );
// Configure the layers list selector
m_LayerSelectionCtrl->SetLayersHotkeys( false );
m_LayerSelectionCtrl->SetLayerMask( INTERNAL_CU_LAYERS|EDGE_LAYER );
m_LayerSelectionCtrl->SetBoardFrame( m_parent );
m_LayerSelectionCtrl->Resync();
if( m_LayerSelectionCtrl->SetLayerSelection( m_item->GetLayer() ) < 0 )
{
wxMessageBox( _("This item has an illegal layer id.\n"
"Now, forced on the front silk screen layer. Please, fix it") );
m_LayerSelectionCtrl->SetLayerSelection( SILKSCREEN_N_FRONT );
}
}
/* generate shapes of graphic items (outlines) on layer aLayer as polygons,
* and adds these polygons to aCornerBuffer
* aCornerBuffer = the buffer to store polygons
* aInflateValue = a value to inflate shapes
* aCircleToSegmentsCount = number of segments to approximate a circle
* aCorrectionFactor = the correction to apply to the circle radius
* to generate the polygon.
* if aCorrectionFactor = 1.0, the polygon is inside the circle
* the radius of circle approximated by segments is
* initial radius * aCorrectionFactor
*/
void MODULE::TransformGraphicShapesWithClearanceToPolygonSet(
LAYER_NUM aLayer,
CPOLYGONS_LIST& aCornerBuffer,
int aInflateValue,
int aCircleToSegmentsCount,
double aCorrectionFactor )
{
std::vector<TEXTE_MODULE *> texts; // List of TEXTE_MODULE to convert
EDGE_MODULE* outline;
for( EDA_ITEM* item = GraphicalItems(); item != NULL; item = item->Next() )
{
switch( item->Type() )
{
case PCB_MODULE_TEXT_T:
if( ((TEXTE_MODULE*)item)->GetLayer() == aLayer )
texts.push_back( (TEXTE_MODULE *) item );
break;
case PCB_MODULE_EDGE_T:
outline = (EDGE_MODULE*) item;
if( outline->GetLayer() != aLayer )
break;
switch( outline->GetShape() )
{
case S_SEGMENT:
TransformRoundedEndsSegmentToPolygon( aCornerBuffer,
outline->GetStart(),
outline->GetEnd(),
aCircleToSegmentsCount,
outline->GetWidth() );
break;
case S_CIRCLE:
TransformRingToPolygon( aCornerBuffer, outline->GetCenter(),
outline->GetRadius(), aCircleToSegmentsCount,
outline->GetWidth() );
break;
case S_ARC:
TransformArcToPolygon( aCornerBuffer,
outline->GetCenter(), outline->GetArcStart(),
outline->GetAngle(),
aCircleToSegmentsCount, outline->GetWidth() );
break;
case S_POLYGON:
// for outline shape = S_POLYGON:
// We must compute true coordinates from m_PolyPoints
// which are relative to module position and module orientation = 0
for( unsigned ii = 0; ii < outline->GetPolyPoints().size(); ii++ )
{
CPolyPt corner( outline->GetPolyPoints()[ii] );
RotatePoint( &corner.x, &corner.y, GetOrientation() );
corner.x += GetPosition().x;
corner.y += GetPosition().y;
aCornerBuffer.Append( corner );
}
aCornerBuffer.CloseLastContour();
break;
default:
DBG( printf( "Error: Shape %d not implemented!\n",
outline->GetShape() ); )
break;
}
break;
default:
break;
}
}
MODULE* PCB_EDIT_FRAME::Genere_Self( wxDC* DC )
{
D_PAD* pad;
int ll;
wxString msg;
m_canvas->CallMouseCapture( DC, wxDefaultPosition, false );
m_canvas->SetMouseCapture( NULL, NULL );
if( s_inductor_pattern.m_Flag == false )
{
DisplayError( this, wxT( "Starting point not init.." ) );
return NULL;
}
s_inductor_pattern.m_Flag = false;
s_inductor_pattern.m_End = GetCrossHairPosition();
wxPoint pt = s_inductor_pattern.m_End - s_inductor_pattern.m_Start;
int min_len = KiROUND( EuclideanNorm( pt ) );
s_inductor_pattern.m_lenght = min_len;
// Enter the desired length.
msg = StringFromValue( g_UserUnit, s_inductor_pattern.m_lenght );
wxTextEntryDialog dlg( this, wxEmptyString, _( "Length of Trace:" ), msg );
if( dlg.ShowModal() != wxID_OK )
return NULL; // canceled by user
msg = dlg.GetValue();
s_inductor_pattern.m_lenght = ValueFromString( g_UserUnit, msg );
// Control values (ii = minimum length)
if( s_inductor_pattern.m_lenght < min_len )
{
DisplayError( this, _( "Requested length < minimum length" ) );
return NULL;
}
// Calculate the elements.
s_inductor_pattern.m_Width = GetDesignSettings().GetCurrentTrackWidth();
std::vector <wxPoint> buffer;
ll = BuildCornersList_S_Shape( buffer, s_inductor_pattern.m_Start,
s_inductor_pattern.m_End, s_inductor_pattern.m_lenght,
s_inductor_pattern.m_Width );
if( !ll )
{
DisplayError( this, _( "Requested length too large" ) );
return NULL;
}
// Generate footprint. the value is also used as footprint name.
msg.Empty();
wxTextEntryDialog cmpdlg( this, wxEmptyString, _( "Component Value:" ), msg );
cmpdlg.SetTextValidator( FILE_NAME_CHAR_VALIDATOR( &msg ) );
if( ( cmpdlg.ShowModal() != wxID_OK ) || msg.IsEmpty() )
return NULL; // Aborted by user
MODULE* module = CreateNewModule( msg );
// here the module is already in the BOARD, CreateNewModule() does that.
module->SetFPID( FPID( std::string( "mw_inductor" ) ) );
module->SetAttributes( MOD_VIRTUAL | MOD_CMS );
module->ClearFlags();
module->SetPosition( s_inductor_pattern.m_End );
// Generate segments
for( unsigned jj = 1; jj < buffer.size(); jj++ )
{
EDGE_MODULE* PtSegm;
PtSegm = new EDGE_MODULE( module );
PtSegm->SetStart( buffer[jj - 1] );
PtSegm->SetEnd( buffer[jj] );
PtSegm->SetWidth( s_inductor_pattern.m_Width );
PtSegm->SetLayer( module->GetLayer() );
PtSegm->SetShape( S_SEGMENT );
PtSegm->SetStart0( PtSegm->GetStart() - module->GetPosition() );
PtSegm->SetEnd0( PtSegm->GetEnd() - module->GetPosition() );
module->GraphicalItems().PushBack( PtSegm );
}
// Place a pad on each end of coil.
pad = new D_PAD( module );
module->Pads().PushFront( pad );
pad->SetPadName( wxT( "1" ) );
pad->SetPosition( s_inductor_pattern.m_End );
pad->SetPos0( pad->GetPosition() - module->GetPosition() );
pad->SetSize( wxSize( s_inductor_pattern.m_Width, s_inductor_pattern.m_Width ) );
pad->SetLayerSet( LSET( module->GetLayer() ) );
pad->SetAttribute( PAD_ATTRIB_SMD );
pad->SetShape( PAD_SHAPE_CIRCLE );
D_PAD* newpad = new D_PAD( *pad );
module->Pads().Insert( newpad, pad->Next() );
pad = newpad;
pad->SetPadName( wxT( "2" ) );
pad->SetPosition( s_inductor_pattern.m_Start );
pad->SetPos0( pad->GetPosition() - module->GetPosition() );
// Modify text positions.
SetMsgPanel( module );
wxPoint refPos( ( s_inductor_pattern.m_Start.x + s_inductor_pattern.m_End.x ) / 2,
( s_inductor_pattern.m_Start.y + s_inductor_pattern.m_End.y ) / 2 );
wxPoint valPos = refPos;
refPos.y -= module->Reference().GetSize().y;
module->Reference().SetPosition( refPos );
valPos.y += module->Value().GetSize().y;
module->Value().SetPosition( valPos );
module->CalculateBoundingBox();
module->Draw( m_canvas, DC, GR_OR );
return module;
}
void MODULE::Flip( const wxPoint& aCentre )
{
TEXTE_MODULE* text;
// Move module to its final position:
wxPoint finalPos = m_Pos;
finalPos.y = aCentre.y - ( finalPos.y - aCentre.y ); /// Mirror the Y position
SetPosition( finalPos );
// Flip layer
SetLayer( FlipLayer( GetLayer() ) );
// Reverse mirror orientation.
NEGATE( m_Orient );
NORMALIZE_ANGLE_POS( m_Orient );
// Mirror pads to other side of board about the x axis, i.e. vertically.
for( D_PAD* pad = m_Pads; pad; pad = pad->Next() )
pad->Flip( m_Pos );
// Mirror reference.
text = m_Reference;
text->m_Pos.y -= m_Pos.y;
NEGATE( text->m_Pos.y );
text->m_Pos.y += m_Pos.y;
NEGATE(text->m_Pos0.y);
NEGATE_AND_NORMALIZE_ANGLE_POS( text->m_Orient );
text->SetLayer( FlipLayer( text->GetLayer() ) );
text->m_Mirror = IsBackLayer( GetLayer() );
// Mirror value.
text = m_Value;
text->m_Pos.y -= m_Pos.y;
NEGATE( text->m_Pos.y );
text->m_Pos.y += m_Pos.y;
NEGATE( text->m_Pos0.y );
NEGATE_AND_NORMALIZE_ANGLE_POS( text->m_Orient );
text->SetLayer( FlipLayer( text->GetLayer() ) );
text->m_Mirror = IsBackLayer( GetLayer() );
// Reverse mirror module graphics and texts.
for( EDA_ITEM* item = m_Drawings; item; item = item->Next() )
{
switch( item->Type() )
{
case PCB_MODULE_EDGE_T:
{
EDGE_MODULE* em = (EDGE_MODULE*) item;
wxPoint s = em->GetStart();
s.y -= m_Pos.y;
s.y = -s.y;
s.y += m_Pos.y;
em->SetStart( s );
wxPoint e = em->GetEnd();
e.y -= m_Pos.y;
e.y = -e.y;
e.y += m_Pos.y;
em->SetEnd( e );
NEGATE( em->m_Start0.y );
NEGATE( em->m_End0.y );
if( em->GetShape() == S_ARC )
{
em->SetAngle( -em->GetAngle() );
}
em->SetLayer( FlipLayer( em->GetLayer() ) );
}
break;
case PCB_MODULE_TEXT_T:
text = (TEXTE_MODULE*) item;
text->m_Pos.y -= m_Pos.y;
NEGATE( text->m_Pos.y );
text->m_Pos.y += m_Pos.y;
NEGATE( text->m_Pos0.y );
NEGATE_AND_NORMALIZE_ANGLE_POS( text->m_Orient );
text->SetLayer( FlipLayer( text->GetLayer() ) );
text->m_Mirror = IsBackLayer( GetLayer() );
break;
default:
wxMessageBox( wxT( "MODULE::Flip() error: Unknown Draw Type" ) );
break;
}
}
CalculateBoundingBox();
}
MODULE* PCB_EDIT_FRAME::Genere_Self( wxDC* DC )
{
D_PAD* pad;
int ll;
wxString msg;
m_canvas->CallMouseCapture( DC, wxDefaultPosition, false );
m_canvas->SetMouseCapture( NULL, NULL );
if( Self_On == 0 )
{
DisplayError( this, wxT( "Starting point not init.." ) );
return NULL;
}
Self_On = 0;
Mself.m_End = GetCrossHairPosition();
wxPoint pt = Mself.m_End - Mself.m_Start;
int min_len = KiROUND( EuclideanNorm( pt ) );
Mself.lng = min_len;
// Enter the desired length.
msg = StringFromValue( g_UserUnit, Mself.lng );
wxTextEntryDialog dlg( this, _( "Length:" ), _( "Length" ), msg );
if( dlg.ShowModal() != wxID_OK )
return NULL; // canceled by user
msg = dlg.GetValue();
Mself.lng = ValueFromString( g_UserUnit, msg );
// Control values (ii = minimum length)
if( Mself.lng < min_len )
{
DisplayError( this, _( "Requested length < minimum length" ) );
return NULL;
}
// Calculate the elements.
Mself.m_Width = GetBoard()->GetCurrentTrackWidth();
std::vector <wxPoint> buffer;
ll = BuildCornersList_S_Shape( buffer, Mself.m_Start, Mself.m_End, Mself.lng, Mself.m_Width );
if( !ll )
{
DisplayError( this, _( "Requested length too large" ) );
return NULL;
}
// Generate module.
MODULE* module;
module = Create_1_Module( wxEmptyString );
if( module == NULL )
return NULL;
// here the module is already in the BOARD, Create_1_Module() does that.
module->SetFPID( FPID( std::string( "MuSelf" ) ) );
module->SetAttributes( MOD_VIRTUAL | MOD_CMS );
module->ClearFlags();
module->SetPosition( Mself.m_End );
// Generate segments
for( unsigned jj = 1; jj < buffer.size(); jj++ )
{
EDGE_MODULE* PtSegm;
PtSegm = new EDGE_MODULE( module );
PtSegm->SetStart( buffer[jj - 1] );
PtSegm->SetEnd( buffer[jj] );
PtSegm->SetWidth( Mself.m_Width );
PtSegm->SetLayer( module->GetLayer() );
PtSegm->SetShape( S_SEGMENT );
PtSegm->SetStart0( PtSegm->GetStart() - module->GetPosition() );
PtSegm->SetEnd0( PtSegm->GetEnd() - module->GetPosition() );
module->GraphicalItems().PushBack( PtSegm );
}
// Place a pad on each end of coil.
pad = new D_PAD( module );
module->Pads().PushFront( pad );
pad->SetPadName( wxT( "1" ) );
pad->SetPosition( Mself.m_End );
pad->SetPos0( pad->GetPosition() - module->GetPosition() );
pad->SetSize( wxSize( Mself.m_Width, Mself.m_Width ) );
pad->SetLayerMask( GetLayerMask( module->GetLayer() ) );
pad->SetAttribute( PAD_SMD );
pad->SetShape( PAD_CIRCLE );
D_PAD* newpad = new D_PAD( *pad );
module->Pads().Insert( newpad, pad->Next() );
pad = newpad;
pad->SetPadName( wxT( "2" ) );
pad->SetPosition( Mself.m_Start );
pad->SetPos0( pad->GetPosition() - module->GetPosition() );
// Modify text positions.
SetMsgPanel( module );
wxPoint refPos( ( Mself.m_Start.x + Mself.m_End.x ) / 2,
( Mself.m_Start.y + Mself.m_End.y ) / 2 );
wxPoint valPos = refPos;
refPos.y -= module->Reference().GetSize().y;
module->Reference().SetTextPosition( refPos );
valPos.y += module->Value().GetSize().y;
module->Value().SetTextPosition( valPos );
module->Reference().SetPos0( module->Reference().GetTextPosition() - module->GetPosition() );
module->Value().SetPos0( module->Value().GetTextPosition() - module->GetPosition() );
module->CalculateBoundingBox();
module->Draw( m_canvas, DC, GR_OR );
return module;
}
