void DIALOG_MODEDIT_FP_BODY_ITEM_PROPERTIES::OnOkClick( wxCommandEvent& event )
/*******************************************************************/
/* Copy values in text control to the item parameters
*/
{
LAYER_NUM layer = m_LayerSelectionCtrl->GetLayerSelection();
if( IsCopperLayer( layer ) )
{
/* an edge is put on a copper layer: this it is very dangerous. a
* confirmation is requested */
if( !IsOK( NULL,
_( "The graphic item will be on a copper layer. This is very dangerous. Are you sure?" ) ) )
return;
}
m_parent->SaveCopyInUndoList( m_module, UR_MODEDIT );
m_module->SetLastEditTime();
wxString msg;
wxPoint coord;
msg = m_Center_StartXCtrl->GetValue();
coord.x = ValueFromString( g_UserUnit, msg );
msg = m_Center_StartYCtrl->GetValue();
coord.y = ValueFromString( g_UserUnit, msg );
m_item->SetStart( coord );
m_item->SetStart0( coord );
msg = m_EndX_Radius_Ctrl->GetValue();
coord.x = ValueFromString( g_UserUnit, msg );
msg = m_EndY_Ctrl->GetValue();
coord.y = ValueFromString( g_UserUnit, msg );
m_item->SetEnd( coord );
m_item->SetEnd0( coord );
msg = m_ThicknessCtrl->GetValue();
m_item->SetWidth( ValueFromString( g_UserUnit, msg ) );
msg = m_DefaultThicknessCtrl->GetValue();
int thickness = ValueFromString( g_UserUnit, msg );
m_brdSettings.m_ModuleSegmentWidth = thickness;
m_parent->SetDesignSettings( m_brdSettings );
m_item->SetLayer( layer );
if( m_item->GetShape() == S_ARC )
{
double angle;
m_Angle_Ctrl->GetValue().ToDouble( &angle );
NORMALIZE_ANGLE_360(angle);
m_item->SetAngle( angle );
}
m_parent->OnModify();
m_parent->SetMsgPanel( m_item );
Close( true );
}
bool DIALOG_MODEDIT_FP_BODY_ITEM_PROPERTIES::TransferDataFromWindow()
{
if( !DIALOG_GRAPHIC_ITEM_PROPERTIES_BASE::TransferDataFromWindow() )
return false;
LAYER_NUM layer = m_LayerSelectionCtrl->GetLayerSelection();
if( IsCopperLayer( layer ) )
{
/* an edge is put on a copper layer: this it is very dangerous. a
* confirmation is requested */
if( !IsOK( NULL,
_( "The graphic item will be on a copper layer. This is very dangerous. Are you sure?" ) ) )
return false;;
}
m_parent->SaveCopyInUndoList( m_module, UR_MODEDIT );
m_module->SetLastEditTime();
wxString msg;
wxPoint coord;
msg = m_Center_StartXCtrl->GetValue();
coord.x = ValueFromString( g_UserUnit, msg );
msg = m_Center_StartYCtrl->GetValue();
coord.y = ValueFromString( g_UserUnit, msg );
m_item->SetStart( coord );
m_item->SetStart0( coord );
msg = m_EndX_Radius_Ctrl->GetValue();
coord.x = ValueFromString( g_UserUnit, msg );
msg = m_EndY_Ctrl->GetValue();
coord.y = ValueFromString( g_UserUnit, msg );
m_item->SetEnd( coord );
m_item->SetEnd0( coord );
msg = m_ThicknessCtrl->GetValue();
m_item->SetWidth( ValueFromString( g_UserUnit, msg ) );
msg = m_DefaultThicknessCtrl->GetValue();
int thickness = ValueFromString( g_UserUnit, msg );
m_brdSettings.m_ModuleSegmentWidth = thickness;
m_parent->SetDesignSettings( m_brdSettings );
m_item->SetLayer( ToLAYER_ID( layer ) );
if( m_item->GetShape() == S_ARC )
{
m_item->SetAngle( m_AngleValue * 10.0 );
}
m_parent->OnModify();
m_parent->SetMsgPanel( m_item );
return true;
}
/* Move marked items, at new position = old position + offset
*/
void MoveMarkedItems( MODULE* module, wxPoint offset )
{
EDA_ITEM* item;
if( module == NULL )
return;
if( module->Reference().IsSelected() )
module->Reference().Move( offset );
if( module->Value().IsSelected() )
module->Value().Move( offset );
D_PAD* pad = module->Pads();
for( ; pad != NULL; pad = pad->Next() )
{
if( !pad->IsSelected() )
continue;
pad->SetPosition( pad->GetPosition() + offset );
pad->SetPos0( pad->GetPos0() + offset );
}
item = module->GraphicalItems();
for( ; item != NULL; item = item->Next() )
{
if( !item->IsSelected() )
continue;
switch( item->Type() )
{
case PCB_MODULE_TEXT_T:
static_cast<TEXTE_MODULE*>( item )->Move( offset );
break;
case PCB_MODULE_EDGE_T:
{
EDGE_MODULE* em = (EDGE_MODULE*) item;
em->SetStart( em->GetStart() + offset );
em->SetEnd( em->GetEnd() + offset );
em->SetStart0( em->GetStart0() + offset );
em->SetEnd0( em->GetEnd0() + offset );
}
break;
default:
;
}
}
ClearMarkItems( module );
}
/* Move marked items, at new position = old position + offset
*/
void MoveMarkedItems( MODULE* module, wxPoint offset )
{
EDA_ITEM* item;
if( module == NULL )
return;
D_PAD* pad = module->Pads();
for( ; pad != NULL; pad = pad->Next() )
{
if( !pad->IsSelected() )
continue;
pad->SetPosition( pad->GetPosition() + offset );
pad->SetPos0( pad->GetPos0() + offset );
}
item = module->GraphicalItems();
for( ; item != NULL; item = item->Next() )
{
if( !item->IsSelected() )
continue;
switch( item->Type() )
{
case PCB_MODULE_TEXT_T:
{
TEXTE_MODULE* tm = (TEXTE_MODULE*) item;
tm->Offset( offset );
tm->SetPos0( tm->GetPos0() + offset );
}
break;
case PCB_MODULE_EDGE_T:
{
EDGE_MODULE* em = (EDGE_MODULE*) item;
em->SetStart( em->GetStart() + offset );
em->SetEnd( em->GetEnd() + offset );
em->SetStart0( em->GetStart0() + offset );
em->SetEnd0( em->GetEnd0() + offset );
}
break;
default:
;
}
item->ClearFlags();
}
}
MODULE* MWAVE::CreateMicrowaveInductor( INDUCTOR_PATTERN& inductorPattern,
PCB_EDIT_FRAME* aPcbFrame, wxString& aErrorMessage )
{
/* Build a microwave inductor footprint.
* - Length Mself.lng
* - Extremities Mself.m_Start and Mself.m_End
* We must determine:
* Mself.nbrin = number of segments perpendicular to the direction
* (The coil nbrin will demicercles + 1 + 2 1 / 4 circle)
* Mself.lbrin = length of a strand
* Mself.radius = radius of rounded parts of the coil
* Mself.delta = segments extremities connection between him and the coil even
*
* The equations are
* Mself.m_Size.x = 2 * Mself.radius + Mself.lbrin
* Mself.m_Size.y * Mself.delta = 2 + 2 * Mself.nbrin * Mself.radius
* Mself.lng = 2 * Mself.delta / / connections to the coil
+ (Mself.nbrin-2) * Mself.lbrin / / length of the strands except 1st and last
+ (Mself.nbrin 1) * (PI * Mself.radius) / / length of rounded
* Mself.lbrin + / 2 - Melf.radius * 2) / / length of 1st and last bit
*
* The constraints are:
* Nbrin >= 2
* Mself.radius < Mself.m_Size.x
* Mself.m_Size.y = Mself.radius * 4 + 2 * Mself.raccord
* Mself.lbrin> Mself.radius * 2
*
* The calculation is conducted in the following way:
* Initially:
* Nbrin = 2
* Radius = 4 * m_Size.x (arbitrarily fixed value)
* Then:
* Increasing the number of segments to the desired length
* (Radius decreases if necessary)
*/
D_PAD* pad;
int ll;
wxString msg;
auto pt = inductorPattern.m_End - inductorPattern.m_Start;
int min_len = KiROUND( EuclideanNorm( pt ) );
inductorPattern.m_length = min_len;
// Enter the desired length.
msg = StringFromValue( g_UserUnit, inductorPattern.m_length );
wxTextEntryDialog dlg( nullptr, wxEmptyString, _( "Length of Trace:" ), msg );
if( dlg.ShowModal() != wxID_OK )
return nullptr; // canceled by user
msg = dlg.GetValue();
inductorPattern.m_length = ValueFromString( g_UserUnit, msg );
// Control values (ii = minimum length)
if( inductorPattern.m_length < min_len )
{
aErrorMessage = _( "Requested length < minimum length" );
return nullptr;
}
// Calculate the elements.
std::vector <wxPoint> buffer;
ll = BuildCornersList_S_Shape( buffer, inductorPattern.m_Start,
inductorPattern.m_End, inductorPattern.m_length,
inductorPattern.m_Width );
if( !ll )
{
aErrorMessage = _( "Requested length too large" );
return nullptr;
}
// Generate footprint. the value is also used as footprint name.
msg = "L";
wxTextEntryDialog cmpdlg( nullptr, wxEmptyString, _( "Component Value:" ), msg );
cmpdlg.SetTextValidator( FILE_NAME_CHAR_VALIDATOR( &msg ) );
if( ( cmpdlg.ShowModal() != wxID_OK ) || msg.IsEmpty() )
return nullptr; // Aborted by user
MODULE* module = aPcbFrame->CreateNewModule( msg );
// here the module is already in the BOARD, CreateNewModule() does that.
module->SetFPID( LIB_ID( wxString( "mw_inductor" ) ) );
module->SetAttributes( MOD_VIRTUAL | MOD_CMS );
module->ClearFlags();
module->SetPosition( inductorPattern.m_End );
// Generate segments
for( unsigned jj = 1; jj < buffer.size(); jj++ )
{
EDGE_MODULE* PtSegm;
PtSegm = new EDGE_MODULE( module );
PtSegm->SetStart( buffer[jj - 1] );
PtSegm->SetEnd( buffer[jj] );
PtSegm->SetWidth( inductorPattern.m_Width );
PtSegm->SetLayer( module->GetLayer() );
PtSegm->SetShape( S_SEGMENT );
PtSegm->SetStart0( PtSegm->GetStart() - module->GetPosition() );
PtSegm->SetEnd0( PtSegm->GetEnd() - module->GetPosition() );
module->GraphicalItemsList().PushBack( PtSegm );
}
// Place a pad on each end of coil.
pad = new D_PAD( module );
module->PadsList().PushFront( pad );
pad->SetName( "1" );
pad->SetPosition( inductorPattern.m_End );
pad->SetPos0( pad->GetPosition() - module->GetPosition() );
pad->SetSize( wxSize( inductorPattern.m_Width, inductorPattern.m_Width ) );
pad->SetLayerSet( LSET( module->GetLayer() ) );
pad->SetAttribute( PAD_ATTRIB_SMD );
pad->SetShape( PAD_SHAPE_CIRCLE );
D_PAD* newpad = new D_PAD( *pad );
module->PadsList().Insert( newpad, pad->Next() );
pad = newpad;
pad->SetName( "2" );
pad->SetPosition( inductorPattern.m_Start );
pad->SetPos0( pad->GetPosition() - module->GetPosition() );
// Modify text positions.
wxPoint refPos( ( inductorPattern.m_Start.x + inductorPattern.m_End.x ) / 2,
( inductorPattern.m_Start.y + inductorPattern.m_End.y ) / 2 );
wxPoint valPos = refPos;
refPos.y -= module->Reference().GetTextSize().y;
module->Reference().SetPosition( refPos );
valPos.y += module->Value().GetTextSize().y;
module->Value().SetPosition( valPos );
module->CalculateBoundingBox();
return module;
}
/** Rotate marked items, refer to a rotation point at position offset
* Note: because this function is used in global transform,
* if force_all is true, all items will be rotated
*/
void RotateMarkedItems( MODULE* module, wxPoint offset, bool force_all )
{
#define ROTATE( z ) RotatePoint( (&z), offset, 900 )
if( module == NULL )
return;
for( D_PAD* pad = module->Pads(); pad; pad = pad->Next() )
{
if( !pad->IsSelected() && !force_all )
continue;
wxPoint pos = pad->GetPosition();
ROTATE( pos );
pad->SetPosition( pos );
pad->SetPos0( pad->GetPosition() );
pad->SetOrientation( pad->GetOrientation() + 900 );
}
for( EDA_ITEM* item = module->GraphicalItems(); item; item = item->Next() )
{
if( !item->IsSelected() && !force_all)
continue;
switch( item->Type() )
{
case PCB_MODULE_EDGE_T:
{
EDGE_MODULE* em = (EDGE_MODULE*) item;
wxPoint tmp = em->GetStart();
ROTATE( tmp );
em->SetStart( tmp );
em->SetStart0( tmp );
tmp = em->GetEnd();
ROTATE( tmp );
em->SetEnd( tmp );
em->SetEnd0( tmp );
}
break;
case PCB_MODULE_TEXT_T:
{
TEXTE_MODULE* tm = (TEXTE_MODULE*) item;
wxPoint pos = tm->GetTextPosition();
ROTATE( pos );
tm->SetTextPosition( pos );
tm->SetPos0( tm->GetTextPosition() );
tm->SetOrientation( tm->GetOrientation() + 900 );
}
break;
default:
;
}
item->ClearFlags();
}
}
MODULE* PCB_EDIT_FRAME::Genere_Self( wxDC* DC )
{
D_PAD* pad;
int ll;
wxString msg;
m_canvas->CallMouseCapture( DC, wxDefaultPosition, false );
m_canvas->SetMouseCapture( NULL, NULL );
if( s_inductor_pattern.m_Flag == false )
{
DisplayError( this, wxT( "Starting point not init.." ) );
return NULL;
}
s_inductor_pattern.m_Flag = false;
s_inductor_pattern.m_End = GetCrossHairPosition();
wxPoint pt = s_inductor_pattern.m_End - s_inductor_pattern.m_Start;
int min_len = KiROUND( EuclideanNorm( pt ) );
s_inductor_pattern.m_lenght = min_len;
// Enter the desired length.
msg = StringFromValue( g_UserUnit, s_inductor_pattern.m_lenght );
wxTextEntryDialog dlg( this, wxEmptyString, _( "Length of Trace:" ), msg );
if( dlg.ShowModal() != wxID_OK )
return NULL; // canceled by user
msg = dlg.GetValue();
s_inductor_pattern.m_lenght = ValueFromString( g_UserUnit, msg );
// Control values (ii = minimum length)
if( s_inductor_pattern.m_lenght < min_len )
{
DisplayError( this, _( "Requested length < minimum length" ) );
return NULL;
}
// Calculate the elements.
s_inductor_pattern.m_Width = GetDesignSettings().GetCurrentTrackWidth();
std::vector <wxPoint> buffer;
ll = BuildCornersList_S_Shape( buffer, s_inductor_pattern.m_Start,
s_inductor_pattern.m_End, s_inductor_pattern.m_lenght,
s_inductor_pattern.m_Width );
if( !ll )
{
DisplayError( this, _( "Requested length too large" ) );
return NULL;
}
// Generate footprint. the value is also used as footprint name.
msg.Empty();
wxTextEntryDialog cmpdlg( this, wxEmptyString, _( "Component Value:" ), msg );
cmpdlg.SetTextValidator( FILE_NAME_CHAR_VALIDATOR( &msg ) );
if( ( cmpdlg.ShowModal() != wxID_OK ) || msg.IsEmpty() )
return NULL; // Aborted by user
MODULE* module = CreateNewModule( msg );
// here the module is already in the BOARD, CreateNewModule() does that.
module->SetFPID( FPID( std::string( "mw_inductor" ) ) );
module->SetAttributes( MOD_VIRTUAL | MOD_CMS );
module->ClearFlags();
module->SetPosition( s_inductor_pattern.m_End );
// Generate segments
for( unsigned jj = 1; jj < buffer.size(); jj++ )
{
EDGE_MODULE* PtSegm;
PtSegm = new EDGE_MODULE( module );
PtSegm->SetStart( buffer[jj - 1] );
PtSegm->SetEnd( buffer[jj] );
PtSegm->SetWidth( s_inductor_pattern.m_Width );
PtSegm->SetLayer( module->GetLayer() );
PtSegm->SetShape( S_SEGMENT );
PtSegm->SetStart0( PtSegm->GetStart() - module->GetPosition() );
PtSegm->SetEnd0( PtSegm->GetEnd() - module->GetPosition() );
module->GraphicalItems().PushBack( PtSegm );
}
// Place a pad on each end of coil.
pad = new D_PAD( module );
module->Pads().PushFront( pad );
pad->SetPadName( wxT( "1" ) );
pad->SetPosition( s_inductor_pattern.m_End );
pad->SetPos0( pad->GetPosition() - module->GetPosition() );
pad->SetSize( wxSize( s_inductor_pattern.m_Width, s_inductor_pattern.m_Width ) );
pad->SetLayerSet( LSET( module->GetLayer() ) );
pad->SetAttribute( PAD_ATTRIB_SMD );
pad->SetShape( PAD_SHAPE_CIRCLE );
D_PAD* newpad = new D_PAD( *pad );
module->Pads().Insert( newpad, pad->Next() );
pad = newpad;
pad->SetPadName( wxT( "2" ) );
pad->SetPosition( s_inductor_pattern.m_Start );
pad->SetPos0( pad->GetPosition() - module->GetPosition() );
// Modify text positions.
SetMsgPanel( module );
wxPoint refPos( ( s_inductor_pattern.m_Start.x + s_inductor_pattern.m_End.x ) / 2,
( s_inductor_pattern.m_Start.y + s_inductor_pattern.m_End.y ) / 2 );
wxPoint valPos = refPos;
refPos.y -= module->Reference().GetSize().y;
module->Reference().SetPosition( refPos );
valPos.y += module->Value().GetSize().y;
module->Value().SetPosition( valPos );
module->CalculateBoundingBox();
module->Draw( m_canvas, DC, GR_OR );
return module;
}
void MODULE::Flip( const wxPoint& aCentre )
{
TEXTE_MODULE* text;
// Move module to its final position:
wxPoint finalPos = m_Pos;
finalPos.y = aCentre.y - ( finalPos.y - aCentre.y ); /// Mirror the Y position
SetPosition( finalPos );
// Flip layer
SetLayer( FlipLayer( GetLayer() ) );
// Reverse mirror orientation.
NEGATE( m_Orient );
NORMALIZE_ANGLE_POS( m_Orient );
// Mirror pads to other side of board about the x axis, i.e. vertically.
for( D_PAD* pad = m_Pads; pad; pad = pad->Next() )
pad->Flip( m_Pos );
// Mirror reference.
text = m_Reference;
text->m_Pos.y -= m_Pos.y;
NEGATE( text->m_Pos.y );
text->m_Pos.y += m_Pos.y;
NEGATE(text->m_Pos0.y);
NEGATE_AND_NORMALIZE_ANGLE_POS( text->m_Orient );
text->SetLayer( FlipLayer( text->GetLayer() ) );
text->m_Mirror = IsBackLayer( GetLayer() );
// Mirror value.
text = m_Value;
text->m_Pos.y -= m_Pos.y;
NEGATE( text->m_Pos.y );
text->m_Pos.y += m_Pos.y;
NEGATE( text->m_Pos0.y );
NEGATE_AND_NORMALIZE_ANGLE_POS( text->m_Orient );
text->SetLayer( FlipLayer( text->GetLayer() ) );
text->m_Mirror = IsBackLayer( GetLayer() );
// Reverse mirror module graphics and texts.
for( EDA_ITEM* item = m_Drawings; item; item = item->Next() )
{
switch( item->Type() )
{
case PCB_MODULE_EDGE_T:
{
EDGE_MODULE* em = (EDGE_MODULE*) item;
wxPoint s = em->GetStart();
s.y -= m_Pos.y;
s.y = -s.y;
s.y += m_Pos.y;
em->SetStart( s );
wxPoint e = em->GetEnd();
e.y -= m_Pos.y;
e.y = -e.y;
e.y += m_Pos.y;
em->SetEnd( e );
NEGATE( em->m_Start0.y );
NEGATE( em->m_End0.y );
if( em->GetShape() == S_ARC )
{
em->SetAngle( -em->GetAngle() );
}
em->SetLayer( FlipLayer( em->GetLayer() ) );
}
break;
case PCB_MODULE_TEXT_T:
text = (TEXTE_MODULE*) item;
text->m_Pos.y -= m_Pos.y;
NEGATE( text->m_Pos.y );
text->m_Pos.y += m_Pos.y;
NEGATE( text->m_Pos0.y );
NEGATE_AND_NORMALIZE_ANGLE_POS( text->m_Orient );
text->SetLayer( FlipLayer( text->GetLayer() ) );
text->m_Mirror = IsBackLayer( GetLayer() );
break;
default:
wxMessageBox( wxT( "MODULE::Flip() error: Unknown Draw Type" ) );
break;
}
}
CalculateBoundingBox();
}
MODULE* PCB_EDIT_FRAME::Genere_Self( wxDC* DC )
{
D_PAD* pad;
int ll;
wxString msg;
m_canvas->CallMouseCapture( DC, wxDefaultPosition, false );
m_canvas->SetMouseCapture( NULL, NULL );
if( Self_On == 0 )
{
DisplayError( this, wxT( "Starting point not init.." ) );
return NULL;
}
Self_On = 0;
Mself.m_End = GetCrossHairPosition();
wxPoint pt = Mself.m_End - Mself.m_Start;
int min_len = KiROUND( EuclideanNorm( pt ) );
Mself.lng = min_len;
// Enter the desired length.
msg = StringFromValue( g_UserUnit, Mself.lng );
wxTextEntryDialog dlg( this, _( "Length:" ), _( "Length" ), msg );
if( dlg.ShowModal() != wxID_OK )
return NULL; // canceled by user
msg = dlg.GetValue();
Mself.lng = ValueFromString( g_UserUnit, msg );
// Control values (ii = minimum length)
if( Mself.lng < min_len )
{
DisplayError( this, _( "Requested length < minimum length" ) );
return NULL;
}
// Calculate the elements.
Mself.m_Width = GetBoard()->GetCurrentTrackWidth();
std::vector <wxPoint> buffer;
ll = BuildCornersList_S_Shape( buffer, Mself.m_Start, Mself.m_End, Mself.lng, Mself.m_Width );
if( !ll )
{
DisplayError( this, _( "Requested length too large" ) );
return NULL;
}
// Generate module.
MODULE* module;
module = Create_1_Module( wxEmptyString );
if( module == NULL )
return NULL;
// here the module is already in the BOARD, Create_1_Module() does that.
module->SetFPID( FPID( std::string( "MuSelf" ) ) );
module->SetAttributes( MOD_VIRTUAL | MOD_CMS );
module->ClearFlags();
module->SetPosition( Mself.m_End );
// Generate segments
for( unsigned jj = 1; jj < buffer.size(); jj++ )
{
EDGE_MODULE* PtSegm;
PtSegm = new EDGE_MODULE( module );
PtSegm->SetStart( buffer[jj - 1] );
PtSegm->SetEnd( buffer[jj] );
PtSegm->SetWidth( Mself.m_Width );
PtSegm->SetLayer( module->GetLayer() );
PtSegm->SetShape( S_SEGMENT );
PtSegm->SetStart0( PtSegm->GetStart() - module->GetPosition() );
PtSegm->SetEnd0( PtSegm->GetEnd() - module->GetPosition() );
module->GraphicalItems().PushBack( PtSegm );
}
// Place a pad on each end of coil.
pad = new D_PAD( module );
module->Pads().PushFront( pad );
pad->SetPadName( wxT( "1" ) );
pad->SetPosition( Mself.m_End );
pad->SetPos0( pad->GetPosition() - module->GetPosition() );
pad->SetSize( wxSize( Mself.m_Width, Mself.m_Width ) );
pad->SetLayerMask( GetLayerMask( module->GetLayer() ) );
pad->SetAttribute( PAD_SMD );
pad->SetShape( PAD_CIRCLE );
D_PAD* newpad = new D_PAD( *pad );
module->Pads().Insert( newpad, pad->Next() );
pad = newpad;
pad->SetPadName( wxT( "2" ) );
pad->SetPosition( Mself.m_Start );
pad->SetPos0( pad->GetPosition() - module->GetPosition() );
// Modify text positions.
SetMsgPanel( module );
wxPoint refPos( ( Mself.m_Start.x + Mself.m_End.x ) / 2,
( Mself.m_Start.y + Mself.m_End.y ) / 2 );
wxPoint valPos = refPos;
refPos.y -= module->Reference().GetSize().y;
module->Reference().SetTextPosition( refPos );
valPos.y += module->Value().GetSize().y;
module->Value().SetTextPosition( valPos );
module->Reference().SetPos0( module->Reference().GetTextPosition() - module->GetPosition() );
module->Value().SetPos0( module->Value().GetTextPosition() - module->GetPosition() );
module->CalculateBoundingBox();
module->Draw( m_canvas, DC, GR_OR );
return module;
}
int DRAWING_TOOL::PlaceDXF( const TOOL_EVENT& aEvent )
{
if( !m_frame->GetModel() )
return 0;
DIALOG_DXF_IMPORT dlg( m_frame );
int dlgResult = dlg.ShowModal();
const std::list<BOARD_ITEM*>& list = dlg.GetImportedItems();
if( dlgResult != wxID_OK || list.empty() )
return 0;
VECTOR2I cursorPos = m_controls->GetCursorPosition();
VECTOR2I delta = cursorPos - list.front()->GetPosition();
// Add a VIEW_GROUP that serves as a preview for the new item
SELECTION preview( m_view );
BOARD_COMMIT commit( m_frame );
// Build the undo list & add items to the current view
for( auto item : list )
{
assert( item->Type() == PCB_LINE_T || item->Type() == PCB_TEXT_T );
preview.Add( item );
}
BOARD_ITEM* firstItem = preview.Front();
m_view->Add( &preview );
m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true );
m_controls->ShowCursor( true );
m_controls->SetSnapping( true );
SCOPED_DRAW_MODE scopedDrawMode( m_mode, MODE::DXF );
Activate();
// Main loop: keep receiving events
while( OPT_TOOL_EVENT evt = Wait() )
{
cursorPos = m_controls->GetCursorPosition();
if( evt->IsMotion() )
{
delta = cursorPos - firstItem->GetPosition();
for( auto item : preview )
item->Move( wxPoint( delta.x, delta.y ) );
m_view->Update( &preview );
}
else if( evt->Category() == TC_COMMAND )
{
// TODO it should be handled by EDIT_TOOL, so add items and select?
if( evt->IsAction( &COMMON_ACTIONS::rotate ) )
{
for( auto item : preview )
item->Rotate( wxPoint( cursorPos.x, cursorPos.y ),
m_frame->GetRotationAngle() );
m_view->Update( &preview );
}
else if( evt->IsAction( &COMMON_ACTIONS::flip ) )
{
for( auto item : preview )
item->Flip( wxPoint( cursorPos.x, cursorPos.y ) );
m_view->Update( &preview );
}
else if( evt->IsCancel() || evt->IsActivate() )
{
preview.FreeItems();
break;
}
}
else if ( evt->IsClick( BUT_RIGHT ) )
{
showContextMenu();
}
else if( evt->IsClick( BUT_LEFT ) )
{
// Place the drawing
BOARD_ITEM_CONTAINER* parent = m_frame->GetModel();
for( auto item : preview )
{
if( m_editModules )
{
// Modules use different types for the same things,
// so we need to convert imported items to appropriate classes.
BOARD_ITEM* converted = NULL;
switch( item->Type() )
{
case PCB_TEXT_T:
{
TEXTE_PCB* text = static_cast<TEXTE_PCB*>( item );
TEXTE_MODULE* textMod = new TEXTE_MODULE( (MODULE*) parent );
// Assignment operator also copies the item PCB_TEXT_T type,
// so it cannot be added to a module which handles PCB_MODULE_TEXT_T
textMod->SetPosition( text->GetPosition() );
textMod->SetText( text->GetText() );
textMod->SetSize( text->GetSize() );
textMod->SetThickness( text->GetThickness() );
textMod->SetOrientation( text->GetOrientation() );
textMod->SetTextPosition( text->GetTextPosition() );
textMod->SetSize( text->GetSize() );
textMod->SetMirrored( text->IsMirrored() );
textMod->SetAttributes( text->GetAttributes() );
textMod->SetItalic( text->IsItalic() );
textMod->SetBold( text->IsBold() );
textMod->SetHorizJustify( text->GetHorizJustify() );
textMod->SetVertJustify( text->GetVertJustify() );
textMod->SetMultilineAllowed( text->IsMultilineAllowed() );
converted = textMod;
break;
}
case PCB_LINE_T:
{
DRAWSEGMENT* seg = static_cast<DRAWSEGMENT*>( item );
EDGE_MODULE* modSeg = new EDGE_MODULE( (MODULE*) parent );
// Assignment operator also copies the item PCB_LINE_T type,
// so it cannot be added to a module which handles PCB_MODULE_EDGE_T
modSeg->SetWidth( seg->GetWidth() );
modSeg->SetStart( seg->GetStart() );
modSeg->SetEnd( seg->GetEnd() );
modSeg->SetAngle( seg->GetAngle() );
modSeg->SetShape( seg->GetShape() );
modSeg->SetType( seg->GetType() );
modSeg->SetBezControl1( seg->GetBezControl1() );
modSeg->SetBezControl2( seg->GetBezControl2() );
modSeg->SetBezierPoints( seg->GetBezierPoints() );
modSeg->SetPolyPoints( seg->GetPolyPoints() );
converted = modSeg;
break;
}
default:
assert( false );
break;
}
if( converted )
converted->SetLayer( item->GetLayer() );
delete item;
item = converted;
}
if( item )
commit.Add( item );
}
commit.Push( _( "Place a DXF drawing" ) );
break;
}
}
preview.Clear();
m_controls->ShowCursor( false );
m_controls->SetSnapping( false );
m_controls->SetAutoPan( false );
m_controls->CaptureCursor( false );
m_view->Remove( &preview );
return 0;
}
