Example #1
0
/**
 * Function PlaceCells
 * Initialize the matrix routing by setting obstacles for each occupied cell
 * a cell set to HOLE is an obstacle for tracks and vias
 * a cell set to VIA_IMPOSSIBLE is an obstacle for vias only.
 * a cell set to CELL_is_EDGE is a frontier.
 * Tracks and vias having the same net code as net_code are skipped
 * (htey do not are obstacles)
 *
 * For single-sided Routing 1:
 * BOTTOM side is used, and Route_Layer_BOTTOM = Route_Layer_TOP
 *
 * If flag == FORCE_PADS: all pads will be put in matrix as obstacles.
 */
void PlaceCells( BOARD* aPcb, int net_code, int flag )
{
    int       ux0 = 0, uy0 = 0, ux1, uy1, dx, dy;
    int       marge, via_marge;
    LAYER_MSK layerMask;

    // use the default NETCLASS?
    NETCLASS* nc = aPcb->m_NetClasses.GetDefault();

    int       trackWidth = nc->GetTrackWidth();
    int       clearance  = nc->GetClearance();
    int       viaSize    = nc->GetViaDiameter();

    marge     = clearance + (trackWidth / 2);
    via_marge = clearance + (viaSize / 2);

    // Place PADS on matrix routing:
    for( unsigned i = 0; i < aPcb->GetPadCount(); ++i )
    {
        D_PAD* pad = aPcb->GetPad( i );

        if( net_code != pad->GetNet() || (flag & FORCE_PADS) )
        {
            ::PlacePad( pad, HOLE, marge, WRITE_CELL );
        }

        ::PlacePad( pad, VIA_IMPOSSIBLE, via_marge, WRITE_OR_CELL );
    }

    // Place outlines of modules on matrix routing, if they are on a copper layer
    // or on the edge layer
    TRACK tmpSegm( NULL );  // A dummy track used to create segments.

    for( MODULE* module = aPcb->m_Modules; module; module = module->Next() )
    {
        for( BOARD_ITEM* item = module->GraphicalItems(); item; item = item->Next() )
        {
            switch( item->Type() )
            {
            case PCB_MODULE_EDGE_T:
            {
                EDGE_MODULE* edge = (EDGE_MODULE*) item;

                tmpSegm.SetLayer( edge->GetLayer() );

                if( tmpSegm.GetLayer() == EDGE_N )
                    tmpSegm.SetLayer( UNDEFINED_LAYER );

                tmpSegm.SetStart( edge->GetStart() );
                tmpSegm.SetEnd(   edge->GetEnd() );
                tmpSegm.SetShape( edge->GetShape() );
                tmpSegm.SetWidth( edge->GetWidth() );
                tmpSegm.m_Param = edge->GetAngle();
                tmpSegm.SetNet( -1 );

                TraceSegmentPcb( &tmpSegm, HOLE, marge, WRITE_CELL );
                TraceSegmentPcb( &tmpSegm, VIA_IMPOSSIBLE, via_marge, WRITE_OR_CELL );
            }
            break;

            default:
                break;
            }
        }
    }

    // Place board outlines and texts on copper layers:
    for( BOARD_ITEM* item = aPcb->m_Drawings; item; item = item->Next() )
    {
        switch( item->Type() )
        {
        case PCB_LINE_T:
        {
            DRAWSEGMENT* DrawSegm;

            int          type_cell = HOLE;
            DrawSegm = (DRAWSEGMENT*) item;
            tmpSegm.SetLayer( DrawSegm->GetLayer() );

            if( DrawSegm->GetLayer() == EDGE_N )
            {
                tmpSegm.SetLayer( UNDEFINED_LAYER );
                type_cell |= CELL_is_EDGE;
            }

            tmpSegm.SetStart( DrawSegm->GetStart() );
            tmpSegm.SetEnd(   DrawSegm->GetEnd() );
            tmpSegm.SetShape( DrawSegm->GetShape() );
            tmpSegm.SetWidth( DrawSegm->GetWidth() );
            tmpSegm.m_Param = DrawSegm->GetAngle();
            tmpSegm.SetNet( -1 );

            TraceSegmentPcb( &tmpSegm, type_cell, marge, WRITE_CELL );
        }
        break;

        case PCB_TEXT_T:
        {
            TEXTE_PCB* PtText;
            PtText = (TEXTE_PCB*) item;

            if( PtText->GetText().Length() == 0 )
                break;

            EDA_RECT textbox = PtText->GetTextBox( -1 );
            ux0 = textbox.GetX();
            uy0 = textbox.GetY();
            dx  = textbox.GetWidth();
            dy  = textbox.GetHeight();

            /* Put bounding box (rectangle) on matrix */
            dx /= 2;
            dy /= 2;

            ux1 = ux0 + dx;
            uy1 = uy0 + dy;

            ux0 -= dx;
            uy0 -= dy;

            layerMask = GetLayerMask( PtText->GetLayer() );

            TraceFilledRectangle( ux0 - marge, uy0 - marge, ux1 + marge,
                                  uy1 + marge, PtText->GetOrientation(),
                                  layerMask, HOLE, WRITE_CELL );

            TraceFilledRectangle( ux0 - via_marge, uy0 - via_marge,
                                  ux1 + via_marge, uy1 + via_marge,
                                  PtText->GetOrientation(),
                                  layerMask, VIA_IMPOSSIBLE, WRITE_OR_CELL );
        }
        break;

        default:
            break;
        }
    }

    /* Put tracks and vias on matrix */
    for( TRACK* track = aPcb->m_Track; track; track = track->Next() )
    {
        if( net_code == track->GetNet() )
            continue;

        TraceSegmentPcb( track, HOLE, marge, WRITE_CELL );
        TraceSegmentPcb( track, VIA_IMPOSSIBLE, via_marge, WRITE_OR_CELL );
    }
}
void DIALOG_MODEDIT_FP_BODY_ITEM_PROPERTIES::initDlg()
/* Initialize messages and values in text control,
 * according to the item parameters values
*/
{
    SetFocus();
    m_StandardButtonsSizerOK->SetDefault();

    // Set unit symbol
    wxStaticText * texts_unit[] =
    {
        m_StartPointXUnit,
        m_StartPointYUnit,
        m_EndPointXUnit,
        m_EndPointYUnit,
        m_ThicknessTextUnit,
        m_DefaulThicknessTextUnit,
        NULL
    };

    for( int ii = 0; ; ii++ )
    {
        if( texts_unit[ii] == NULL )
            break;
        texts_unit[ii]->SetLabel( GetAbbreviatedUnitsLabel() );
    }

    wxString msg;

    // Change texts according to the segment shape:
    switch ( m_item->GetShape() )
    {
    case S_CIRCLE:
        m_StartPointXLabel->SetLabel(_("Center X"));
        m_StartPointYLabel->SetLabel(_("Center Y"));
        m_EndPointXLabel->SetLabel(_("Point X"));
        m_EndPointYLabel->SetLabel(_("Point Y"));
        m_Angle_Text->Show(false);
        m_Angle_Ctrl->Show(false);
        m_AngleUnit->Show(false);
        break;

    case S_ARC:
        m_StartPointXLabel->SetLabel(_("Center X"));
        m_StartPointYLabel->SetLabel(_("Center Y"));
        m_EndPointXLabel->SetLabel(_("Start Point X"));
        m_EndPointYLabel->SetLabel(_("Start Point Y"));

        // Here the angle is a double, but the UI is still working
        // with integers
        msg << int( m_item->GetAngle() );
        m_Angle_Ctrl->SetValue(msg);
        break;

    default:
        m_Angle_Text->Show(false);
        m_Angle_Ctrl->Show(false);
        m_AngleUnit->Show(false);
        break;
    }

    PutValueInLocalUnits( *m_Center_StartXCtrl, m_item->GetStart().x );

    PutValueInLocalUnits( *m_Center_StartYCtrl, m_item->GetStart().y );

    PutValueInLocalUnits( *m_EndX_Radius_Ctrl, m_item->GetEnd().x );

    PutValueInLocalUnits( *m_EndY_Ctrl, m_item->GetEnd().y );

    PutValueInLocalUnits( *m_ThicknessCtrl, m_item->GetWidth() );

    PutValueInLocalUnits( *m_DefaultThicknessCtrl, m_brdSettings.m_ModuleSegmentWidth );

    // Configure the layers list selector
    m_LayerSelectionCtrl->SetLayersHotkeys( false );
    m_LayerSelectionCtrl->SetLayerMask( INTERNAL_CU_LAYERS|EDGE_LAYER );
    m_LayerSelectionCtrl->SetBoardFrame( m_parent );
    m_LayerSelectionCtrl->Resync();
    if( m_LayerSelectionCtrl->SetLayerSelection( m_item->GetLayer() ) < 0 )
    {
        wxMessageBox( _("This item has an illegal layer id.\n"
                        "Now, forced on the front silk screen layer. Please, fix it") );
        m_LayerSelectionCtrl->SetLayerSelection( SILKSCREEN_N_FRONT );
    }
}
bool DIALOG_MODEDIT_FP_BODY_ITEM_PROPERTIES::TransferDataToWindow()
{
    // Set unit symbol
    wxStaticText* texts_unit[] =
    {
        m_StartPointXUnit,
        m_StartPointYUnit,
        m_EndPointXUnit,
        m_EndPointYUnit,
        m_ThicknessTextUnit,
        m_DefaulThicknessTextUnit,
    };

    for( size_t ii = 0; ii < DIM( texts_unit ); ii++ )
    {
        texts_unit[ii]->SetLabel( GetAbbreviatedUnitsLabel() );
    }

    wxString msg;

    // Change texts according to the segment shape:
    switch( m_item->GetShape() )
    {
    case S_CIRCLE:
        SetTitle( _( "Circle Properties" ) );
        m_StartPointXLabel->SetLabel( _( "Center X" ) );
        m_StartPointYLabel->SetLabel( _( "Center Y" ) );
        m_EndPointXLabel->SetLabel( _( "Point X" ) );
        m_EndPointYLabel->SetLabel( _( "Point Y" ) );
        m_AngleText->Show( false );
        m_AngleCtrl->Show( false );
        m_AngleUnit->Show( false );
        break;

    case S_ARC:
        SetTitle( _( "Arc Properties" ) );
        m_StartPointXLabel->SetLabel( _( "Center X" ) );
        m_StartPointYLabel->SetLabel( _( "Center Y" ) );
        m_EndPointXLabel->SetLabel( _( "Start Point X" ) );
        m_EndPointYLabel->SetLabel( _( "Start Point Y" ) );

        m_AngleValue = m_item->GetAngle() / 10.0;
        break;

    case S_SEGMENT:
        SetTitle( _( "Line Segment Properties" ) );

        // Fall through.
    default:
        m_AngleText->Show( false );
        m_AngleCtrl->Show( false );
        m_AngleUnit->Show( false );
        break;
    }

    PutValueInLocalUnits( *m_Center_StartXCtrl, m_item->GetStart().x );

    PutValueInLocalUnits( *m_Center_StartYCtrl, m_item->GetStart().y );

    PutValueInLocalUnits( *m_EndX_Radius_Ctrl, m_item->GetEnd().x );

    PutValueInLocalUnits( *m_EndY_Ctrl, m_item->GetEnd().y );

    PutValueInLocalUnits( *m_ThicknessCtrl, m_item->GetWidth() );

    PutValueInLocalUnits( *m_DefaultThicknessCtrl, m_brdSettings.m_ModuleSegmentWidth );

    // Configure the layers list selector
    m_LayerSelectionCtrl->SetLayersHotkeys( false );
    m_LayerSelectionCtrl->SetLayerSet( LSET::InternalCuMask().set( Edge_Cuts ) );
    m_LayerSelectionCtrl->SetBoardFrame( m_parent );
    m_LayerSelectionCtrl->Resync();

    if( m_LayerSelectionCtrl->SetLayerSelection( m_item->GetLayer() ) < 0 )
    {
        wxMessageBox( _( "This item was on an unknown layer.\n"
                         "It has been moved to the front silk screen layer. Please fix it." ) );
        m_LayerSelectionCtrl->SetLayerSelection( F_SilkS );
    }

    return DIALOG_GRAPHIC_ITEM_PROPERTIES_BASE::TransferDataToWindow();
}
/* generate shapes of graphic items (outlines) on layer aLayer as polygons,
 * and adds these polygons to aCornerBuffer
 * aCornerBuffer = the buffer to store polygons
 * aInflateValue = a value to inflate shapes
 * aCircleToSegmentsCount = number of segments to approximate a circle
 * aCorrectionFactor = the correction to apply to the circle radius
 *  to generate the polygon.
 *  if aCorrectionFactor = 1.0, the polygon is inside the circle
 *  the radius of circle approximated by segments is
 *  initial radius * aCorrectionFactor
 */
void MODULE::TransformGraphicShapesWithClearanceToPolygonSet(
                        LAYER_NUM aLayer,
                        CPOLYGONS_LIST& aCornerBuffer,
                        int                    aInflateValue,
                        int                    aCircleToSegmentsCount,
                        double                 aCorrectionFactor )
{
    std::vector<TEXTE_MODULE *> texts;  // List of TEXTE_MODULE to convert
    EDGE_MODULE* outline;

    for( EDA_ITEM* item = GraphicalItems(); item != NULL; item = item->Next() )
    {
        switch( item->Type() )
        {
        case PCB_MODULE_TEXT_T:
            if( ((TEXTE_MODULE*)item)->GetLayer() == aLayer )
                texts.push_back( (TEXTE_MODULE *) item );
            break;

        case PCB_MODULE_EDGE_T:
            outline = (EDGE_MODULE*) item;
            if( outline->GetLayer() != aLayer )
                break;

            switch( outline->GetShape() )
            {
            case S_SEGMENT:
                TransformRoundedEndsSegmentToPolygon( aCornerBuffer,
                                           outline->GetStart(),
                                           outline->GetEnd(),
                                           aCircleToSegmentsCount,
                                           outline->GetWidth() );
                break;

            case S_CIRCLE:
                TransformRingToPolygon( aCornerBuffer, outline->GetCenter(),
                                outline->GetRadius(), aCircleToSegmentsCount,
                                outline->GetWidth() );
                break;

            case S_ARC:
                TransformArcToPolygon( aCornerBuffer,
                            outline->GetCenter(), outline->GetArcStart(),
                            outline->GetAngle(),
                            aCircleToSegmentsCount, outline->GetWidth() );
                break;

            case S_POLYGON:
                // for outline shape = S_POLYGON:
                // We must compute true coordinates from m_PolyPoints
                // which are relative to module position and module orientation = 0
                for( unsigned ii = 0; ii < outline->GetPolyPoints().size(); ii++ )
                {
                    CPolyPt corner( outline->GetPolyPoints()[ii] );
                    RotatePoint( &corner.x, &corner.y, GetOrientation() );
                    corner.x += GetPosition().x;
                    corner.y += GetPosition().y;
                    aCornerBuffer.Append( corner );
                }
                aCornerBuffer.CloseLastContour();
                break;

            default:
                DBG( printf( "Error: Shape %d not implemented!\n",
                        outline->GetShape() ); )
                break;
            }
                break;

            default:
                break;
        }
    }