int SCH_SCREEN::UpdatePickList()
{
ITEM_PICKER picker;
EDA_RECT area;
unsigned count;
area.SetOrigin( m_BlockLocate.GetOrigin() );
area.SetSize( m_BlockLocate.GetSize() );
area.Normalize();
for( SCH_ITEM* item = m_drawList.begin(); item; item = item->Next() )
{
// An item is picked if its bounding box intersects the reference area.
if( item->HitTest( area ) )
{
picker.SetItem( item );
m_BlockLocate.PushItem( picker );
}
}
// if the block is composed of one item,
// select it as the current item
count = m_BlockLocate.GetCount();
if( count == 1 )
{
SetCurItem( (SCH_ITEM*) m_BlockLocate.GetItem( 0 ) );
}
else
{
SetCurItem( NULL );
}
return count;
}
void SCH_SCREEN::addConnectedItemsToBlock( const wxPoint& position )
{
SCH_ITEM* item;
ITEM_PICKER picker;
bool addinlist = true;
for( item = m_drawList.begin(); item; item = item->Next() )
{
picker.SetItem( item );
if( !item->IsConnectable() || !item->IsConnected( position )
|| (item->GetFlags() & SKIP_STRUCT) )
continue;
if( item->IsSelected() && item->Type() != SCH_LINE_T )
continue;
// A line having 2 ends, it can be tested twice: one time per end
if( item->Type() == SCH_LINE_T )
{
if( ! item->IsSelected() ) // First time this line is tested
item->SetFlags( SELECTED | STARTPOINT | ENDPOINT );
else // second time (or more) this line is tested
addinlist = false;
SCH_LINE* line = (SCH_LINE*) item;
if( line->GetStartPoint() == position )
item->ClearFlags( STARTPOINT );
else if( line->GetEndPoint() == position )
item->ClearFlags( ENDPOINT );
}
else
item->SetFlags( SELECTED );
if( addinlist )
{
picker.SetFlags( item->GetFlags() );
m_BlockLocate.GetItems().PushItem( picker );
}
}
}
bool SCH_EDIT_FRAME::HandleBlockEnd( wxDC* aDC )
{
bool nextcmd = false;
bool zoom_command = false;
BLOCK_SELECTOR* block = &GetScreen()->m_BlockLocate;
if( block->GetCount() )
{
BLOCK_STATE_T state = block->GetState();
BLOCK_COMMAND_T command = block->GetCommand();
m_canvas->CallEndMouseCapture( aDC );
block->SetState( state );
block->SetCommand( command );
m_canvas->SetMouseCapture( DrawAndSizingBlockOutlines, AbortBlockCurrentCommand );
SetCrossHairPosition( block->GetEnd() );
if( block->GetCommand() != BLOCK_ABORT )
m_canvas->MoveCursorToCrossHair();
}
if( m_canvas->IsMouseCaptured() )
{
switch( block->GetCommand() )
{
case BLOCK_IDLE:
DisplayError( this, wxT( "Error in HandleBlockPLace()" ) );
break;
case BLOCK_ROTATE:
GetScreen()->UpdatePickList();
DrawAndSizingBlockOutlines( m_canvas, aDC, wxDefaultPosition, false );
if( block->GetCount() )
{
// Compute the rotation center and put it on grid:
wxPoint rotationPoint = block->Centre();
rotationPoint = GetNearestGridPosition( rotationPoint );
SetCrossHairPosition( rotationPoint );
SaveCopyInUndoList( block->GetItems(), UR_ROTATED, rotationPoint );
RotateListOfItems( block->GetItems(), rotationPoint );
OnModify();
}
block->ClearItemsList();
GetScreen()->TestDanglingEnds( m_canvas, aDC );
m_canvas->Refresh();
break;
case BLOCK_DRAG:
case BLOCK_DRAG_ITEM: // Drag from a drag command
GetScreen()->BreakSegmentsOnJunctions();
// fall through
case BLOCK_MOVE:
case BLOCK_COPY:
if( block->GetCommand() == BLOCK_DRAG_ITEM &&
GetScreen()->GetCurItem() != NULL )
{
// This is a drag command, not a mouse block command
// Only this item is put in list
ITEM_PICKER picker;
picker.SetItem( GetScreen()->GetCurItem() );
block->PushItem( picker );
}
else
{
// Collect all items in the locate block
GetScreen()->UpdatePickList();
}
// fall through
case BLOCK_PRESELECT_MOVE: /* Move with preselection list*/
if( block->GetCount() )
{
nextcmd = true;
GetScreen()->SelectBlockItems();
m_canvas->CallMouseCapture( aDC, wxDefaultPosition, false );
m_canvas->SetMouseCaptureCallback( DrawMovingBlockOutlines );
m_canvas->CallMouseCapture( aDC, wxDefaultPosition, false );
block->SetState( STATE_BLOCK_MOVE );
}
else
{
m_canvas->CallMouseCapture( aDC, wxDefaultPosition, false );
m_canvas->SetMouseCapture( NULL, NULL );
}
break;
case BLOCK_DELETE:
GetScreen()->UpdatePickList();
DrawAndSizingBlockOutlines( m_canvas, aDC, wxDefaultPosition, false );
if( block->GetCount() )
{
DeleteItemsInList( m_canvas, block->GetItems() );
OnModify();
}
block->ClearItemsList();
GetScreen()->TestDanglingEnds( m_canvas, aDC );
m_canvas->Refresh();
break;
case BLOCK_SAVE: // Save a copy of items in paste buffer
GetScreen()->UpdatePickList();
DrawAndSizingBlockOutlines( m_canvas, aDC, wxDefaultPosition, false );
if( block->GetCount() )
{
wxPoint move_vector = -GetScreen()->m_BlockLocate.GetLastCursorPosition();
copyBlockItems( block->GetItems() );
MoveItemsInList( m_blockItems.GetItems(), move_vector );
}
block->ClearItemsList();
break;
case BLOCK_PASTE:
block->SetState( STATE_BLOCK_MOVE );
break;
case BLOCK_ZOOM:
zoom_command = true;
break;
case BLOCK_MIRROR_X:
GetScreen()->UpdatePickList();
DrawAndSizingBlockOutlines( m_canvas, aDC, wxDefaultPosition, false );
if( block->GetCount() )
{
// Compute the mirror center and put it on grid.
wxPoint mirrorPoint = block->Centre();
mirrorPoint = GetNearestGridPosition( mirrorPoint );
SetCrossHairPosition( mirrorPoint );
SaveCopyInUndoList( block->GetItems(), UR_MIRRORED_X, mirrorPoint );
MirrorX( block->GetItems(), mirrorPoint );
OnModify();
}
GetScreen()->TestDanglingEnds( m_canvas, aDC );
m_canvas->Refresh();
break;
case BLOCK_MIRROR_Y:
GetScreen()->UpdatePickList();
DrawAndSizingBlockOutlines( m_canvas, aDC, wxDefaultPosition, false );
if( block->GetCount() )
{
// Compute the mirror center and put it on grid.
wxPoint mirrorPoint = block->Centre();
mirrorPoint = GetNearestGridPosition( mirrorPoint );
SetCrossHairPosition( mirrorPoint );
SaveCopyInUndoList( block->GetItems(), UR_MIRRORED_Y, mirrorPoint );
MirrorY( block->GetItems(), mirrorPoint );
OnModify();
}
GetScreen()->TestDanglingEnds( m_canvas, aDC );
m_canvas->Refresh();
break;
default:
break;
}
}
if( block->GetCommand() == BLOCK_ABORT )
{
GetScreen()->ClearDrawingState();
m_canvas->Refresh();
}
if( ! nextcmd )
{
block->SetState( STATE_NO_BLOCK );
block->SetCommand( BLOCK_IDLE );
GetScreen()->SetCurItem( NULL );
m_canvas->EndMouseCapture( GetToolId(), m_canvas->GetCurrentCursor(), wxEmptyString,
false );
}
if( zoom_command )
Window_Zoom( GetScreen()->m_BlockLocate );
return nextcmd;
}
int PCB_EDITOR_CONTROL::ZoneMerge( const TOOL_EVENT& aEvent )
{
SELECTION selection = m_toolMgr->GetTool<SELECTION_TOOL>()->GetSelection();
BOARD* board = getModel<BOARD>();
RN_DATA* ratsnest = board->GetRatsnest();
KIGFX::VIEW* view = getView();
if( selection.Size() < 2 )
return 0;
PICKED_ITEMS_LIST changes;
int netcode = -1;
// Loop through all combinations
for( int ia1 = 0; ia1 < selection.Size() - 1; ++ia1 )
{
ZONE_CONTAINER* curr_area = dynamic_cast<ZONE_CONTAINER*>( selection.Item<EDA_ITEM>( ia1 ) );
if( !curr_area )
continue;
netcode = curr_area->GetNetCode();
EDA_RECT b1 = curr_area->Outline()->GetBoundingBox();
bool mod_ia1 = false;
for( int ia2 = selection.Size() - 1; ia2 > ia1; --ia2 )
{
ZONE_CONTAINER* area2 = dynamic_cast<ZONE_CONTAINER*>( selection.Item<EDA_ITEM>( ia2 ) );
if( !area2 )
continue;
if( area2->GetNetCode() != netcode )
continue;
if( curr_area->GetPriority() != area2->GetPriority() )
continue;
if( curr_area->GetIsKeepout() != area2->GetIsKeepout() )
continue;
if( curr_area->GetLayer() != area2->GetLayer() )
continue;
EDA_RECT b2 = area2->Outline()->GetBoundingBox();
if( b1.Intersects( b2 ) )
{
EDA_ITEM* backup = curr_area->Clone();
bool ret = board->TestAreaIntersection( curr_area, area2 );
if( ret && board->CombineAreas( &changes, curr_area, area2 ) )
{
mod_ia1 = true;
selection.items.RemovePicker( ia2 );
ITEM_PICKER picker( curr_area, UR_CHANGED );
picker.SetLink( backup );
changes.PushItem( picker );
}
else
{
delete backup;
}
}
}
if( mod_ia1 )
--ia1; // if modified, we need to check it again
}
m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true );
m_frame->SaveCopyInUndoList( changes, UR_UNSPECIFIED );
for( unsigned i = 0; i < changes.GetCount(); ++i )
{
ITEM_PICKER picker = changes.GetItemWrapper( i );
BOARD_ITEM* item = static_cast<BOARD_ITEM*>( picker.GetItem() );
if( picker.GetStatus() == UR_DELETED )
{
view->Remove( item );
ratsnest->Remove( item );
}
else if( picker.GetStatus() == UR_CHANGED )
{
item->ViewUpdate( KIGFX::VIEW_ITEM::ALL );
m_toolMgr->RunAction( COMMON_ACTIONS::selectItem, true, item );
}
}
return 0;
}
/**
* When the component table dialog is closed,
* work out if we need to save any changed.
* If so, capture those changes and push them to the undo stack.
*/
bool DIALOG_BOM_EDITOR::TransferDataFromWindow()
{
if( m_bom->HaveFieldsChanged() )
{
/**
* As we may be saving changes across multiple sheets,
* we need to first determine which changes need to be made to which sheet.
* To this end, we perform the following:
* 1. Save the "path" of the currently displayed sheet
* 2. Create a MAP of <SheetPath:ChangeList> changes that need to be made
* 3. Push UNDO actions to appropriate sheets
* 4. Perform all the update actions
* 5. Reset the view to the current sheet
*/
auto currentSheet = m_parent->GetCurrentSheet();
//! Create a map of changes required for each sheet
std::map<wxString, SheetUndoList> undoSheetMap;
// List of components that have changed
auto changed = m_bom->GetChangedComponents();
ITEM_PICKER picker;
// Iterate through each of the components that were changed
for( auto ref : changed )
{
// Extract the SCH_COMPONENT* object
auto cmp = ref.GetComp();
wxString path = ref.GetSheetPath().Path();
// Push the component into the picker list
picker = ITEM_PICKER( cmp, UR_CHANGED );
picker.SetFlags( cmp->GetFlags() );
/*
* If there is not currently an undo list for the given sheet,
* create an empty one
*/
if( undoSheetMap.count( path ) == 0 )
{
SheetUndoList newList;
newList.path = ref.GetSheetPath();
undoSheetMap[path] = newList;
}
auto& pickerList = undoSheetMap[path];
pickerList.items.PushItem( picker );
}
// Iterate through each sheet that needs updating
for( auto it = undoSheetMap.begin(); it != undoSheetMap.end(); ++it )
{
auto undo = it->second;
m_parent->SetCurrentSheet( undo.path );
m_parent->SaveCopyInUndoList( undo.items, UR_CHANGED );
m_parent->OnModify();
}
// Make all component changes
m_bom->ApplyFieldChanges();
// Redraw the current sheet and mark as dirty
m_parent->Refresh();
m_parent->OnModify();
// Reset the view to where we left the user
m_parent->SetCurrentSheet(currentSheet);
}
return true;
}
void SCH_SCREEN::addConnectedItemsToBlock( const SCH_ITEM* aItem, const wxPoint& position )
{
SCH_ITEM* item;
ITEM_PICKER picker;
for( item = m_drawList.begin(); item; item = item->Next() )
{
if( !item->IsConnectable() || ( item->GetFlags() & SKIP_STRUCT )
|| !item->CanConnect( aItem ) || item == aItem )
continue;
// A line having 2 ends, it can be tested twice: one time per end
if( item->Type() == SCH_LINE_T )
{
SCH_LINE* line = (SCH_LINE*) item;
if( !item->HitTest( position ) )
continue;
// First time through. Flags set to denote an end that is not moving
if( !item->IsSelected() )
item->SetFlags( CANDIDATE | STARTPOINT | ENDPOINT );
if( line->GetStartPoint() == position )
item->ClearFlags( STARTPOINT );
else if( line->GetEndPoint() == position )
item->ClearFlags( ENDPOINT );
else
// This picks up items such as labels that can connect to the middle of a line
item->ClearFlags( STARTPOINT | ENDPOINT );
}
// We want to move a mid-connected label or bus entry when the full line is being moved
else if( !item->IsSelected()
&& aItem->Type() == SCH_LINE_T
&& !( aItem->GetFlags() & ( ENDPOINT | STARTPOINT ) ) )
{
std::vector< wxPoint > connections;
item->GetConnectionPoints( connections );
for( auto conn : connections )
{
if( aItem->HitTest( conn ) )
{
item->SetFlags( CANDIDATE );
break;
}
}
}
if( item->IsSelected() )
continue;
if( ( item->GetFlags() & CANDIDATE ) || item->IsConnected( position ) ) // Deal with all non-line items
{
item->ClearFlags( CANDIDATE );
item->SetFlags( SELECTED );
picker.SetItem( item );
picker.SetFlags( item->GetFlags() );
m_BlockLocate.GetItems().PushItem( picker );
}
}
}
