void CubeReflector::updateFace( const ReflectParams ¶ms, U32 faceidx )
{
GFXDEBUGEVENT_SCOPE( CubeReflector_UpdateFace, ColorI::WHITE );
// store current matrices
GFXTransformSaver saver;
// set projection to 90 degrees vertical and horizontal
F32 left, right, top, bottom;
MathUtils::makeFrustum( &left, &right, &top, &bottom, M_HALFPI_F, 1.0f, mDesc->nearDist );
GFX->setFrustum( left, right, bottom, top, mDesc->nearDist, mDesc->farDist );
// We don't use a special clipping projection, but still need to initialize
// this for objects like SkyBox which will use it during a reflect pass.
gClientSceneGraph->setNonClipProjection( GFX->getProjectionMatrix() );
// Standard view that will be overridden below.
VectorF vLookatPt(0.0f, 0.0f, 0.0f), vUpVec(0.0f, 0.0f, 0.0f), vRight(0.0f, 0.0f, 0.0f);
switch( faceidx )
{
case 0 : // D3DCUBEMAP_FACE_POSITIVE_X:
vLookatPt = VectorF( 1.0f, 0.0f, 0.0f );
vUpVec = VectorF( 0.0f, 1.0f, 0.0f );
break;
case 1 : // D3DCUBEMAP_FACE_NEGATIVE_X:
vLookatPt = VectorF( -1.0f, 0.0f, 0.0f );
vUpVec = VectorF( 0.0f, 1.0f, 0.0f );
break;
case 2 : // D3DCUBEMAP_FACE_POSITIVE_Y:
vLookatPt = VectorF( 0.0f, 1.0f, 0.0f );
vUpVec = VectorF( 0.0f, 0.0f,-1.0f );
break;
case 3 : // D3DCUBEMAP_FACE_NEGATIVE_Y:
vLookatPt = VectorF( 0.0f, -1.0f, 0.0f );
vUpVec = VectorF( 0.0f, 0.0f, 1.0f );
break;
case 4 : // D3DCUBEMAP_FACE_POSITIVE_Z:
vLookatPt = VectorF( 0.0f, 0.0f, 1.0f );
vUpVec = VectorF( 0.0f, 1.0f, 0.0f );
break;
case 5: // D3DCUBEMAP_FACE_NEGATIVE_Z:
vLookatPt = VectorF( 0.0f, 0.0f, -1.0f );
vUpVec = VectorF( 0.0f, 1.0f, 0.0f );
break;
}
// create camera matrix
VectorF cross = mCross( vUpVec, vLookatPt );
cross.normalizeSafe();
MatrixF matView(true);
matView.setColumn( 0, cross );
matView.setColumn( 1, vLookatPt );
matView.setColumn( 2, vUpVec );
matView.setPosition( mObject->getPosition() );
matView.inverse();
GFX->setWorldMatrix(matView);
renderTarget->attachTexture( GFXTextureTarget::Color0, cubemap, faceidx );
GFX->setActiveRenderTarget( renderTarget );
GFX->clear( GFXClearStencil | GFXClearTarget | GFXClearZBuffer, gCanvasClearColor, 1.0f, 0 );
SceneRenderState reflectRenderState
(
gClientSceneGraph,
SPT_Reflect,
SceneCameraState::fromGFX()
);
reflectRenderState.getMaterialDelegate().bind( REFLECTMGR, &ReflectionManager::getReflectionMaterial );
reflectRenderState.setDiffuseCameraTransform( params.query->cameraMatrix );
reflectRenderState.disableAdvancedLightingBins(true);
// render scene
LIGHTMGR->registerGlobalLights( &reflectRenderState.getCullingFrustum(), false );
gClientSceneGraph->renderSceneNoLights( &reflectRenderState, mDesc->objectTypeMask );
LIGHTMGR->unregisterAllLights();
// Clean up.
renderTarget->resolve();
}
bool AITurretShape::_testTargetLineOfSight(Point3F& aimPoint, ShapeBase* target, Point3F& sightPoint)
{
Point3F targetCenter = target->getBoxCenter();
RayInfo ri;
bool hit = false;
target->disableCollision();
// First check for a clear line of sight to the target's center
Point3F testPoint = targetCenter;
hit = gServerContainer.castRay(aimPoint, testPoint, sAimTypeMask, &ri);
if (hit)
{
// No clear line of sight to center, so try to the target's right. Players holding
// a gun in their right hand will tend to stick their right shoulder out first if
// they're peering around some cover to shoot, like a wall.
Box3F targetBounds = target->getObjBox();
F32 radius = targetBounds.len_x() > targetBounds.len_y() ? targetBounds.len_x() : targetBounds.len_y();
radius *= 0.5;
VectorF toTurret = aimPoint - targetCenter;
toTurret.normalizeSafe();
VectorF toTurretRight = mCross(toTurret, Point3F::UnitZ);
testPoint = targetCenter + toTurretRight * radius;
hit = gServerContainer.castRay(aimPoint, testPoint, sAimTypeMask, &ri);
if (hit)
{
// No clear line of sight to right, so try the target's left
VectorF toTurretLeft = toTurretRight * -1.0f;
testPoint = targetCenter + toTurretLeft * radius;
hit = gServerContainer.castRay(aimPoint, testPoint, sAimTypeMask, &ri);
}
if (hit)
{
// No clear line of sight to left, so try the target's top
testPoint = targetCenter;
testPoint.z += targetBounds.len_z() * 0.5f;
hit = gServerContainer.castRay(aimPoint, testPoint, sAimTypeMask, &ri);
}
if (hit)
{
// No clear line of sight to top, so try the target's bottom
testPoint = targetCenter;
testPoint.z -= targetBounds.len_z() * 0.5f;
hit = gServerContainer.castRay(aimPoint, testPoint, sAimTypeMask, &ri);
}
}
target->enableCollision();
if (!hit)
{
// Line of sight point is that last one we tested
sightPoint = testPoint;
}
return !hit;
}
void ClippedPolyList::end()
{
PROFILE_SCOPE( ClippedPolyList_Clip );
Poly& poly = mPolyList.last();
// Reject polygons facing away from our normal.
if ( mDot( poly.plane, mNormal ) < mNormalTolCosineRadians )
{
mIndexList.setSize(poly.vertexStart);
mPolyList.decrement();
return;
}
// Build initial inside/outside plane masks
U32 indexStart = poly.vertexStart;
U32 vertexCount = mIndexList.size() - indexStart;
U32 frontMask = 0,backMask = 0;
U32 i;
for (i = indexStart; i < mIndexList.size(); i++)
{
U32 mask = mVertexList[mIndexList[i]].mask;
frontMask |= mask;
backMask |= ~mask;
}
// Trivial accept if all the vertices are on the backsides of
// all the planes.
if (!frontMask)
{
poly.vertexCount = vertexCount;
return;
}
// Trivial reject if any plane not crossed has all it's points
// on the front.
U32 crossMask = frontMask & backMask;
if (~crossMask & frontMask)
{
mIndexList.setSize(poly.vertexStart);
mPolyList.decrement();
return;
}
// Potentially, this will add up to mPlaneList.size() * (indexStart - indexEnd)
// elements to mIndexList, so ensure that it has enough space to store that
// so we can use push_back_noresize. If you find this code block getting hit
// frequently, changing the value of 'IndexListReserveSize' or doing some selective
// allocation is suggested
//
// TODO: Re-visit this, since it obviously does not work correctly, and than
// re-enable the push_back_noresize
//while(mIndexList.size() + mPlaneList.size() * (mIndexList.size() - indexStart) > mIndexList.capacity() )
// mIndexList.reserve(mIndexList.capacity() * 2);
// Need to do some clipping
for (U32 p = 0; p < mPlaneList.size(); p++)
{
U32 pmask = 1 << p;
// Only test against this plane if we have something
// on both sides
if (!(crossMask & pmask))
continue;
U32 indexEnd = mIndexList.size();
U32 i1 = indexEnd - 1;
U32 mask1 = mVertexList[mIndexList[i1]].mask;
for (U32 i2 = indexStart; i2 < indexEnd; i2++)
{
U32 mask2 = mVertexList[mIndexList[i2]].mask;
if ((mask1 ^ mask2) & pmask)
{
//
mVertexList.increment();
VectorF& v1 = mVertexList[mIndexList[i1]].point;
VectorF& v2 = mVertexList[mIndexList[i2]].point;
VectorF vv = v2 - v1;
F32 t = -mPlaneList[p].distToPlane(v1) / mDot(mPlaneList[p],vv);
mNormalList.increment();
VectorF& n1 = mNormalList[mIndexList[i1]];
VectorF& n2 = mNormalList[mIndexList[i1]];
VectorF nn = mLerp( n1, n2, t );
nn.normalizeSafe();
mNormalList.last() = nn;
mIndexList.push_back/*_noresize*/(mVertexList.size() - 1);
Vertex& iv = mVertexList.last();
iv.point.x = v1.x + vv.x * t;
iv.point.y = v1.y + vv.y * t;
iv.point.z = v1.z + vv.z * t;
iv.mask = 0;
// Test against the remaining planes
for (U32 i = p + 1; i < mPlaneList.size(); i++)
if (mPlaneList[i].distToPlane(iv.point) > 0)
{
iv.mask = 1 << i;
break;
}
}
if (!(mask2 & pmask))
{
U32 index = mIndexList[i2];
mIndexList.push_back/*_noresize*/(index);
}
mask1 = mask2;
i1 = i2;
}
// Check for degenerate
indexStart = indexEnd;
if (mIndexList.size() - indexStart < 3)
{
mIndexList.setSize(poly.vertexStart);
mPolyList.decrement();
return;
}
}
// Emit what's left and compress the index list.
poly.vertexCount = mIndexList.size() - indexStart;
memcpy(&mIndexList[poly.vertexStart],
&mIndexList[indexStart],poly.vertexCount);
mIndexList.setSize(poly.vertexStart + poly.vertexCount);
}
