void IsisMain() {
// We will be processing by brick
ProcessByBrick p;
Isis::Cube *amatrixCube=NULL;
Isis::Cube *bmatrixCube=NULL;
// Setup the user input for the input/output files and the option
UserInterface &ui = Application::GetUserInterface();
// Setup the input HiRise cube
Isis::Cube *icube = p.SetInputCube("FROM");
if (icube->Bands() != 1) {
std::string msg = "Only single-band HiRise cubes can be calibrated";
throw Isis::iException::Message(Isis::iException::Io,msg,_FILEINFO_);
}
//Get pertinent label information to determine which band of matrix cube to use
HiLab hilab(icube);
int ccd = hilab.getCcd();
int channel = hilab.getChannel();
if (channel != 0 && channel != 1) {
std::string msg = "Only unstitched cubes can be calibrated";
throw Isis::iException::Message(Isis::iException::Io,msg,_FILEINFO_);
}
int band = 1 + ccd*2 + channel;
string option = ui.GetString("OPTION");
// Set attributes (input band number) for the matrix cube(s);
CubeAttributeInput att("+" + iString(band));
// Determine the file specification to the matrix file(s) if defaulted
// and open
if (ui.WasEntered ("MATRIX") ) {
if (option == "GAIN") {
string matrixFile = ui.GetFilename("MATRIX");
amatrixCube = p.SetInputCube(matrixFile, att);
}
else if (option == "OFFSET") {
string matrixFile = ui.GetFilename("MATRIX");
bmatrixCube = p.SetInputCube(matrixFile, att);
}
else { //(option == "BOTH")
std::string
msg = "The BOTH option cannot be used if a MATRIX is entered";
throw Isis::iException::Message(Isis::iException::Io,msg,_FILEINFO_);
}
}
else {
int tdi = hilab.getTdi();
int bin = hilab.getBin();
if (option == "OFFSET" || option == "BOTH") {
std::string bmatrixFile = "$mro/calibration";
bmatrixFile += "/B_matrix_tdi";
bmatrixFile += iString(tdi) + "_bin" + iString(bin);
bmatrixCube = p.SetInputCube(bmatrixFile, att);
}
if (option == "GAIN" || option == "BOTH") {
std::string amatrixFile = "$mro/calibration";
amatrixFile += "/A_matrix_tdi";
amatrixFile += iString(tdi) + "_bin" + iString(bin);
amatrixCube = p.SetInputCube(amatrixFile, att);
}
}
// Open the output file and set processing parameters
Cube *ocube = p.SetOutputCube ("TO");
p.SetWrap (true);
p.SetBrickSize ( icube->Samples(), 1, 1);
// Add the radiometry group if it is not there yet. Otherwise
// read the current value of the keyword CalibrationParameters.
// Then delete the keyword and rewrite it after appending the
// new value to it. Do it this way to avoid multiple Calibration
// Parameter keywords.
PvlGroup calgrp;
PvlKeyword calKey;
if (ocube->HasGroup("Radiometry")) {
calgrp = ocube->GetGroup ("Radiometry");
if (calgrp.HasKeyword("CalibrationParameters")) {
calKey = calgrp.FindKeyword("CalibrationParameters");
calgrp.DeleteKeyword( "CalibrationParameters" );
}
else {
calKey.SetName ("CalibrationParameters");
}
}
else {
calgrp.SetName("Radiometry");
calKey.SetName ("CalibrationParameters");
}
string keyValue = option;
if (option == "GAIN") {
keyValue += ":" + amatrixCube->Filename();
}
else if (option == "OFFSET") {
keyValue += ":" + bmatrixCube->Filename();
}
else { // "BOTH"
keyValue += ":"+bmatrixCube->Filename()+":"+amatrixCube->Filename();
}
calKey += keyValue;
calgrp += calKey;
ocube->PutGroup(calgrp);
// Start the processing based on the option
if (option == "GAIN") {
p.StartProcess(mult);
}
else if (option == "OFFSET") {
p.StartProcess(sub);
}
else { //(option == "BOTH")
p.StartProcess(multSub);
}
// Cleanup
p.EndProcess();
}
void IsisMain(){
const std::string hical_program = "hicalbeta";
const std::string hical_version = "3.5";
const std::string hical_revision = "$Revision: 1.14 $";
const std::string hical_runtime = Application::DateTime();
UserInterface &ui = Application::GetUserInterface();
string procStep("prepping phase");
try {
// The output from the last processing is the input into subsequent processing
ProcessByLine p;
Cube *hifrom = p.SetInputCube("FROM");
int nsamps = hifrom->Samples();
int nlines = hifrom->Lines();
// Initialize the configuration file
string conf(ui.GetAsString("CONF"));
HiCalConf hiconf(*(hifrom->Label()), conf);
DbProfile hiprof = hiconf.getMatrixProfile();
// Check for label propagation and set the output cube
Cube *ocube = p.SetOutputCube("TO");
if ( !IsTrueValue(hiprof,"PropagateTables", "TRUE") ) {
RemoveHiBlobs(*(ocube->Label()));
}
// Set specified profile if entered by user
if (ui.WasEntered("PROFILE")) {
hiconf.selectProfile(ui.GetAsString("PROFILE"));
}
// Add OPATH parameter to profiles
if (ui.WasEntered("OPATH")) {
hiconf.add("OPATH",ui.GetAsString("OPATH"));
}
else {
// Set default to output directory
hiconf.add("OPATH", Filename(ocube->Filename()).Path());
}
// Do I/F output DN conversions
string units = ui.GetString("UNITS");
// Allocate the calibration list
calVars = new MatrixList;
// Set up access to HiRISE ancillary data (tables, blobs) here. Note it they
// are gone, this will error out. See PropagateTables in conf file.
HiCalData caldata(*hifrom);
////////////////////////////////////////////////////////////////////////////
// FixGaps (Z_f) Get buffer pixels and compute coefficients for equation
// y = a[0] + a[1]*x + a[2] * exp(a[3] * x)
// where y is the average of the buffer pixel region,
// and x is the time at each line in electrons/sec/pixel
procStep = "Zf module";
hiconf.selectProfile("Zf");
hiprof = hiconf.getMatrixProfile();
HiHistory ZfHist;
ZfHist.add("Profile["+ hiprof.Name()+"]");
if ( !SkipModule(hiprof) ) {
DriftBuffer driftB(caldata, hiconf);
calVars->add("Zf", driftB.ref());
ZfHist = driftB.History();
if ( hiprof.exists("DumpModuleFile") ) {
driftB.Dump(hiconf.getMatrixSource("DumpModuleFile",hiprof));
}
}
else {
// NOT RECOMMENDED! This is required for the next step!
// SURELY must be skipped with Z_d step as well!
calVars->add("Zf", HiVector(nlines, 0.0));
ZfHist.add("Debug::SkipModule invoked!");
}
/////////////////////////////////////////////////////////////////////
// DriftCorrect (Z_d)
// Now compute the equation of fit
//
procStep = "Zd module";
HiHistory ZdHist;
hiconf.selectProfile("Zd");
hiprof = hiconf.getMatrixProfile();
ZdHist.add("Profile["+ hiprof.Name()+"]");
if (!SkipModule(hiconf.getMatrixProfile("Zd")) ) {
DriftCorrect driftC(hiconf);
calVars->add("Zd", driftC.Normalize(driftC.Solve(calVars->get("Zf"))));
ZdHist = driftC.History();
if ( hiprof.exists("DumpModuleFile") ) {
driftC.Dump(hiconf.getMatrixSource("DumpModuleFile",hiprof));
}
}
else {
calVars->add("Zd", HiVector(nlines, 0.0));
ZdHist.add("Debug::SkipModule invoked!");
}
////////////////////////////////////////////////////////////////////
// ZeroCorrect (Z_z) Get reverse clock
procStep = "Zz module";
hiconf.selectProfile("Zz");
hiprof = hiconf.getMatrixProfile();
HiHistory ZzHist;
ZzHist.add("Profile["+ hiprof.Name()+"]");
if ( !SkipModule(hiprof) ) {
OffsetCorrect zoff(caldata, hiconf);
calVars->add("Zz", zoff.ref());
ZzHist = zoff.History();
if ( hiprof.exists("DumpModuleFile") ) {
zoff.Dump(hiconf.getMatrixSource("DumpModuleFile",hiprof));
}
}
else {
calVars->add("Zz", HiVector(nsamps, 0.0));
ZzHist.add("Debug::SkipModule invoked!");
}
/////////////////////////////////////////////////////////////////
// DarkSubtract (Z_b) Remove dark current
//
procStep = "Zb module";
hiconf.selectProfile("Zb");
hiprof = hiconf.getMatrixProfile();
HiHistory ZbHist;
ZbHist.add("Profile["+ hiprof.Name()+"]");
if ( !SkipModule(hiprof) ) {
DarkSubtractComp dark(hiconf);
calVars->add("Zb", dark.ref());
ZbHist = dark.History();
if ( hiprof.exists("DumpModuleFile") ) {
dark.Dump(hiconf.getMatrixSource("DumpModuleFile",hiprof));
}
}
else {
calVars->add("Zb", HiVector(nsamps, 0.0));
ZbHist.add("Debug::SkipModule invoked!");
}
////////////////////////////////////////////////////////////////////
// GainVLineCorrect (Z_g) Correct for gain-based drift
//
procStep = "Zg module";
hiconf.selectProfile("Zg");
hiprof = hiconf.getMatrixProfile();
HiHistory ZgHist;
ZgHist.add("Profile["+ hiprof.Name()+"]");
if ( !SkipModule(hiprof) ) {
GainVLineComp gainV(hiconf);
calVars->add("Zg", gainV.ref());
ZgHist = gainV.History();
if ( hiprof.exists("DumpModuleFile") ) {
gainV.Dump(hiconf.getMatrixSource("DumpModuleFile",hiprof));
}
}
else {
calVars->add("Zg", HiVector(nlines, 1.0));
ZgHist.add("Debug::SkipModule invoked!");
}
////////////////////////////////////////////////////////////////////
// GainCorrect (Z_gg) Correct for gain with the G matrix
procStep = "Zgg module";
hiconf.selectProfile("Zgg");
hiprof = hiconf.getMatrixProfile();
HiHistory ZggHist;
ZggHist.add("Profile["+ hiprof.Name()+"]");
if ( !SkipModule(hiprof) ) {
double bin = ToDouble(hiprof("Summing"));
double tdi = ToDouble(hiprof("Tdi"));
double factor = 128.0 / tdi / (bin*bin);
HiVector zgg = hiconf.getMatrix("G", hiprof);
for ( int i = 0 ; i < zgg.dim() ; i++ ) { zgg[i] *= factor; }
calVars->add("Zgg", zgg);;
ZggHist.add("LoadMatrix(G[" + hiconf.getMatrixSource("G",hiprof) +
"],Band[" + ToString(hiconf.getMatrixBand(hiprof)) +
"],Factor[" + ToString(factor) + "])");
if ( hiprof.exists("DumpModuleFile") ) {
Component zg("GMatrix", ZggHist);
zg.Process(zgg);
zg.Dump(hiconf.getMatrixSource("DumpModuleFile",hiprof));
}
}
else {
calVars->add("Zgg", HiVector(nsamps, 1.0));
ZggHist.add("Debug::SkipModule invoked!");
}
////////////////////////////////////////////////////////////////////
// FlatField (Z_a) Flat field correction with A matrix
procStep = "Za module";
hiconf.selectProfile("Za");
hiprof = hiconf.getMatrixProfile();
HiHistory ZaHist;
ZaHist.add("Profile["+ hiprof.Name()+"]");
if ( !SkipModule(hiprof) ) {
FlatFieldComp flat(hiconf);
calVars->add("Za", flat.ref());
ZaHist = flat.History();
if ( hiprof.exists("DumpModuleFile") ) {
flat.Dump(hiconf.getMatrixSource("DumpModuleFile",hiprof));
}
}
else {
calVars->add("Za", HiVector(nsamps, 1.0));
ZaHist.add("Debug::SkipModule invoked!");
}
////////////////////////////////////////////////////////////////////
// FlatField (Z_t) Temperature-dependant gain correction
procStep = "Zt module";
hiconf.selectProfile("Zt");
hiprof = hiconf.getMatrixProfile();
HiHistory ZtHist;
ZtHist.add("Profile["+ hiprof.Name()+"]");
if ( !SkipModule(hiprof) ) {
TempGainCorrect tcorr(hiconf);
calVars->add("Zt", tcorr.ref());
ZtHist = tcorr.History();
if ( hiprof.exists("DumpModuleFile") ) {
tcorr.Dump(hiconf.getMatrixSource("DumpModuleFile",hiprof));
}
}
else {
calVars->add("Zt", HiVector(nsamps, 1.0));
ZtHist.add("Debug::SkipModule invoked!");
}
////////////////////////////////////////////////////////////////////
// I/FCorrect (Z_iof) Conversion to I/F
//
procStep = "Ziof module";
hiconf.selectProfile("Ziof");
hiprof = hiconf.getMatrixProfile();
HiHistory ZiofHist;
ZiofHist.add("Profile["+ hiprof.Name()+"]");
if ( !SkipModule(hiprof) ) {
double sed = ToDouble(hiprof("ScanExposureDuration")); // units = us
if ( IsEqual(units, "IOF") ) {
// Add solar I/F correction parameters
double au = hiconf.sunDistanceAU();
ZiofHist.add("SunDist[" + ToString(au) + " (AU)]");
double suncorr = 1.5 / au;
suncorr *= suncorr;
double zbin = ToDouble(hiprof("ZiofBinFactor"));
ZiofHist.add("ZiofBinFactor[" + ToString(zbin) + "]");
double zgain = ToDouble(hiprof("FilterGainCorrection"));
ZiofHist.add("FilterGainCorrection[" + ToString(zgain) + "]");
ZiofHist.add("ScanExposureDuration[" + ToString(sed) + "]");
double ziof = (zbin * zgain) * (sed * 1.0e-6) * suncorr;
calVars->add("Ziof", HiVector(1, ziof));
ZiofHist.add("I/F_Factor[" + ToString(ziof) + "]");
ZiofHist.add("Units[I/F Reflectance]");
}
else if ( IsEqual(units, "DN/US") ) {
// Ziof is a divisor in calibration equation
double ziof = sed;
calVars->add("Ziof", HiVector(1, ziof));
ZiofHist.add("ScanExposureDuration[" + ToString(sed) + "]");
ZiofHist.add("DN/US_Factor[" + ToString(ziof) + "]");
ZiofHist.add("Units[DNs/microsecond]");
}
else {
// Units are already in DN
double ziof = 1.0;
calVars->add("Ziof", HiVector(1, ziof));
ZiofHist.add("DN_Factor[" + ToString(ziof) + "]");
ZiofHist.add("Units[DN]");
}
}
else {
calVars->add("Ziof", HiVector(1,1.0));
ZiofHist.add("Debug::SkipModule invoked!");
ZiofHist.add("Units[Unknown]");
}
// Reset the profile selection to default
hiconf.selectProfile();
//----------------------------------------------------------------------
//
/////////////////////////////////////////////////////////////////////////
// Call the processing function
procStep = "calibration phase";
p.StartProcess(calibrate);
// Get the default profile for logging purposes
hiprof = hiconf.getMatrixProfile();
const std::string conf_file = hiconf.filepath(conf);
// Quitely dumps parameter history to alternative format file. This
// is completely controlled by the configuration file
if ( hiprof.exists("DumpHistoryFile") ) {
procStep = "logging/reporting phase";
Filename hdump(hiconf.getMatrixSource("DumpHistoryFile",hiprof));
string hdumpFile = hdump.Expanded();
ofstream ofile(hdumpFile.c_str(), ios::out);
if (!ofile) {
string mess = "Unable to open/create history dump file " +
hdump.Expanded();
iException::Message(iException::User, mess, _FILEINFO_).Report();
}
else {
ofile << "Program: " << hical_program << endl;
ofile << "RunTime: " << hical_runtime << endl;
ofile << "Version: " << hical_version << endl;
ofile << "Revision: " << hical_revision << endl << endl;
ofile << "FROM: " << hifrom->Filename() << endl;
ofile << "TO: " << ocube->Filename() << endl;
ofile << "CONF: " << conf_file << endl << endl;
ofile << "/* " << hical_program << " application equation */" << endl
<< "/* hdn = (idn - Zd(Zf) - Zz - Zb) */"
<< endl << "/* odn = hdn / Zg * Zgg * Za * Zt / Ziof */"
<< endl << endl;
ofile << "****** PARAMETER GENERATION HISTORY *******" << endl;
ofile << "\nZf = " << ZfHist << endl;
ofile << "\nZd = " << ZdHist << endl;
ofile << "\nZz = " << ZzHist << endl;
ofile << "\nZb = " << ZbHist << endl;
ofile << "\nZg = " << ZgHist << endl;
ofile << "\nZgg = " << ZggHist << endl;
ofile << "\nZa = " << ZaHist << endl;
ofile << "\nZt = " << ZtHist << endl;
ofile << "\nZiof = " << ZiofHist << endl;
ofile.close();
}
}
// Ensure the RadiometricCalibration group is out there
const std::string rcalGroup("RadiometricCalibration");
if (!ocube->HasGroup(rcalGroup)) {
PvlGroup temp(rcalGroup);
ocube->PutGroup(temp);
}
PvlGroup &rcal = ocube->GetGroup(rcalGroup);
rcal += PvlKeyword("Program", hical_program);
rcal += PvlKeyword("RunTime", hical_runtime);
rcal += PvlKeyword("Version",hical_version);
rcal += PvlKeyword("Revision",hical_revision);
PvlKeyword key("Conf", conf_file);
key.AddCommentWrapped("/* " + hical_program + " application equation */");
key.AddComment("/* hdn = (idn - Zd(Zf) - Zz - Zb) */");
key.AddComment("/* odn = hdn / Zg * Zgg * Za * Zt / Ziof */");
rcal += key;
// Record parameter generation history. Controllable in configuration
// file. Note this is optional because of a BUG!! in the ISIS label
// writer as this application was initially developed
if ( IsEqual(ConfKey(hiprof,"LogParameterHistory",string("TRUE")),"TRUE")) {
rcal += ZfHist.makekey("Zf");
rcal += ZdHist.makekey("Zd");
rcal += ZzHist.makekey("Zz");
rcal += ZbHist.makekey("Zb");
rcal += ZgHist.makekey("Zg");
rcal += ZggHist.makekey("Zgg");
rcal += ZaHist.makekey("Za");
rcal += ZiofHist.makekey("Ziof");
}
p.EndProcess();
}
catch (iException &ie) {
delete calVars;
calVars = 0;
string mess = "Failed in " + procStep;
ie.Message(iException::User, mess.c_str(), _FILEINFO_);
throw;
}
// Clean up parameters
delete calVars;
calVars = 0;
}
// Main program
void IsisMain(){
// Create an object for exporting Isis data
ProcessExport p;
// Open the input cube
Cube *icube = p.SetInputCube("FROM");
// Conform to the Big-Endian format for FITS
if(IsLsb()) p.SetOutputEndian(Isis::Msb);
// Generate the name of the fits file and open it
UserInterface &ui = Application::GetUserInterface();
// specify the bits per pixel
string bitpix;
if (ui.GetString ("BITTYPE") == "8BIT") bitpix = "8";
else if (ui.GetString ("BITTYPE") == "16BIT") bitpix = "16";
else if (ui.GetString ("BITTYPE") == "32BIT") bitpix = "-32";
else {
string msg = "Pixel type of [" + ui.GetString("BITTYPE") + "] is unsupported";
throw iException::Message(iException::User, msg, _FILEINFO_);
}
// Determine bit size and calculate number of bytes to write
// for each line.
if (bitpix == "8") p.SetOutputType(Isis::UnsignedByte);
if (bitpix == "16") p.SetOutputType(Isis::SignedWord);
if (bitpix == "-32") p.SetOutputType(Isis::Real);
// determine core base and multiplier, set up the stretch
PvlGroup pix = icube->Label()->FindObject("IsisCube").FindObject("Core").FindGroup("Pixels");
double scale = pix["Multiplier"][0].ToDouble();
double base = pix["Base"][0].ToDouble();
if (ui.GetString("STRETCH") != "NONE" && bitpix != "-32") {
if (ui.GetString("STRETCH") == "LINEAR") {
p.SetInputRange();
}
else if (ui.GetString("STRETCH") == "MANUAL") {
p.SetInputRange(ui.GetDouble("MINIMUM"), ui.GetDouble("MAXIMUM"));
}
// create a proper scale so pixels look like 32bit data.
scale = ((p.GetInputMaximum() - p.GetInputMinimum()) *
(p.GetOutputMaximum() - p.GetOutputMinimum()));
// round off after 14 decimals to avoid system architecture differences
scale = ((floor(scale * 1e14)) / 1e14);
// create a proper zero point so pixels look like 32bit data.
base = -1.0 * (scale * p.GetOutputMinimum()) + p.GetInputMinimum();
// round off after 14 decimals to avoid system architecture differences
base = ((floor(base * 1e14)) / 1e14);
}
//////////////////////////////////////////
// Write the minimal fits header //
//////////////////////////////////////////
string header;
// specify that this file conforms to simple fits standard
header += FitsKeyword("SIMPLE", true, "T");
// specify the bits per pixel
header += FitsKeyword("BITPIX", true, bitpix);
// specify the number of data axes (2: samples by lines)
int axes = 2;
if (icube->Bands() > 1) {
axes = 3;
}
header += FitsKeyword("NAXIS", true, iString(axes));
// specify the limit on data axis 1 (number of samples)
header += FitsKeyword("NAXIS1", true, iString(icube->Samples()));
// specify the limit on data axis 2 (number of lines)
header += FitsKeyword("NAXIS2", true, iString(icube->Lines()));
if (axes == 3){
header += FitsKeyword("NAXIS3", true, iString(icube->Bands()));
}
header += FitsKeyword("BZERO", true, base);
header += FitsKeyword("BSCALE", true, scale);
// Sky and All cases
if (ui.GetString("INFO") == "SKY" || ui.GetString("INFO") == "ALL") {
iString msg = "cube has not been skymapped";
PvlGroup map;
if (icube->HasGroup("mapping")) {
map = icube->GetGroup("mapping");
msg = (string)map["targetname"];
}
// If we have sky we want it
if (msg == "Sky") {
double midRa = 0, midDec = 0;
midRa = ((double)map["MaximumLongitude"] +
(double)map["MinimumLongitude"])/2;
midDec = ((double)map["MaximumLatitude"] +
(double)map["MinimumLatitude"])/2;
header += FitsKeyword("OBJCTRA", true, iString(midRa));
// Specify the Declination
header += FitsKeyword("OBJCTDEC", true, iString(midDec));
}
if (ui.GetString("INFO") == "ALL") {
header += WritePvl("INSTRUME","Instrument","InstrumentId", icube, true);
header += WritePvl("OBSERVER","Instrument","SpacecraftName", icube, true);
header += WritePvl("OBJECT ","Instrument","TargetName", icube, true);
// StartTime is sometimes middle of the exposure and somtimes beginning,
// so StopTime can't be calculated off of exposure reliably.
header += WritePvl("DATE-OBS","Instrument","StartTime", icube, true);
// Some cameras don't have StopTime
if (icube->HasGroup("Instrument")) {
PvlGroup inst = icube->GetGroup("Instrument");
if (inst.HasKeyword("StopTime")) {
header += WritePvl("TIME_END","Instrument","StopTime", icube, true);
}
if (inst.HasKeyword("ExposureDuration")) {
header += WritePvl("EXPTIME","Instrument","ExposureDuration", icube, false);
}
}
}
// If we were set on SKY and Sky doesn't exist
else if (msg != "Sky") {
throw iException::Message(iException::User,msg,_FILEINFO_);
}
}
// signal the end of the header
header += FitsKeyword("END", false, "");
// fill the rest of the fits header with space so to conform with the fits header
// size of 2880 bytes
for (int i = header.length() % 2880 ; i < 2880 ; i++) header += " ";
// open the cube for writing
string to = ui.GetFilename("TO","fits");
ofstream fout;
fout.open (to.c_str (), ios::out|ios::binary);
if (!fout.is_open ()) {
string msg = "Cannot open fits output file";
throw iException::Message(iException::Programmer,msg,_FILEINFO_);
}
fout.seekp(0);
fout.write(header.c_str(),header.length());
// write the raw cube data
p.StartProcess (fout);
// Finish off data area to a number n % 2880 == 0 is true
// 2880 is the size of the data blocks
int count = 2880 - (fout.tellp() % 2880);
for (int i = 0; i < count; i++) {
// Write nul characters as needed. ascii 0, hex 00...
fout.write("\0", 1);
}
fout.close();
p.EndProcess();
}
void IsisMain ()
{
UserInterface &ui = Application::GetUserInterface();
Filename inFile = ui.GetFilename("FROM");
// Set the processing object
ProcessExportMiniRFLroPds cProcess;
// Setup the input cube
Cube *cInCube = cProcess.SetInputCube("FROM");
Pvl * cInLabel = cInCube->Label();
// Get the output label file
Filename outFile(ui.GetFilename("TO", "lbl"));
string outFilename(outFile.Expanded());
cProcess.SetDetached (true, outFilename);
cProcess.SetExportType ( ProcessExportPds::Fixed );
//Set the resolution to Kilometers
cProcess.SetPdsResolution( ProcessExportPds::Kilometer );
// 32bit
cProcess.SetOutputType(Isis::Real);
cProcess.SetOutputNull(Isis::NULL4);
cProcess.SetOutputLrs(Isis::LOW_REPR_SAT4);
cProcess.SetOutputLis(Isis::LOW_INSTR_SAT4);
cProcess.SetOutputHrs(Isis::HIGH_REPR_SAT4);
cProcess.SetOutputHis(Isis::HIGH_INSTR_SAT4);
cProcess.SetOutputRange(-DBL_MAX, DBL_MAX);
cProcess.SetOutputEndian(Isis::Msb);
// Turn off Keywords
cProcess.ForceScalingFactor(false);
cProcess.ForceSampleBitMask(false);
cProcess.ForceCoreNull (false);
cProcess.ForceCoreLrs (false);
cProcess.ForceCoreLis (false);
cProcess.ForceCoreHrs (false);
cProcess.ForceCoreHis (false);
// Standard label Translation
Pvl &pdsLabel = cProcess.StandardPdsLabel( ProcessExportPds::Image);
// bLevel => Level 2 = True, Level 3 = False
bool bLevel2 = cInCube->HasGroup("Instrument");
// Translate the keywords from the original EDR PDS label that go in
// this RDR PDS label for Level2 images only
if (bLevel2) {
OriginalLabel cOriginalBlob;
cInCube->Read(cOriginalBlob);
Pvl cOrigLabel;
PvlObject cOrigLabelObj = cOriginalBlob.ReturnLabels();
cOrigLabelObj.SetName("OriginalLabelObject");
cOrigLabel.AddObject(cOrigLabelObj);
// Translates the ISIS labels along with the original EDR labels
cOrigLabel.AddObject( *(cInCube->Label()) );
PvlTranslationManager cCubeLabel2(cOrigLabel, "$lro/translations/mrfExportOrigLabel.trn");
cCubeLabel2.Auto(pdsLabel);
if (cInLabel->FindObject("IsisCube").FindGroup("Instrument").HasKeyword("MissionName")) {
PvlKeyword & cKeyMissionName = cInLabel->FindObject("IsisCube").FindGroup("Instrument").FindKeyword("MissionName");
size_t sFound = cKeyMissionName[0].find("CHANDRAYAAN");
if (sFound != string::npos ) {
cCubeLabel2 = PvlTranslationManager(cOrigLabel, "$lro/translations/mrfExportOrigLabelCH1.trn");
cCubeLabel2.Auto(pdsLabel);
}
else {
cCubeLabel2 = PvlTranslationManager(cOrigLabel, "$lro/translations/mrfExportOrigLabelLRO.trn");
cCubeLabel2.Auto(pdsLabel);
}
}
}
else { //Level3 - add Band_Name keyword
PvlGroup & cBandBinGrp = cInCube->GetGroup("BandBin");
PvlKeyword cKeyBandBin = PvlKeyword("BAND_NAME");
PvlKeyword cKeyInBandBin;
if (cBandBinGrp.HasKeyword("OriginalBand")){
cKeyInBandBin = cBandBinGrp.FindKeyword("OriginalBand");
}
else if (cBandBinGrp.HasKeyword("FilterName")){
cKeyInBandBin = cBandBinGrp.FindKeyword("FilterName");
}
for (int i=0; i<cKeyInBandBin.Size(); i++) {
cKeyBandBin += cKeyInBandBin[i];
}
PvlObject &cImageObject( pdsLabel.FindObject("IMAGE") );
cImageObject += cKeyBandBin;
}
// Get the Sources Product ID if entered for Level2 only as per example
if (ui.WasEntered("SRC") && bLevel2) {
std::string sSrcFile = ui.GetFilename("SRC");
std::string sSrcType = ui.GetString("TYPE");
GetSourceProductID(sSrcFile, sSrcType, pdsLabel);
}
// Get the User defined Labels
if (ui.WasEntered("USERLBL")) {
std::string sUserLbl = ui.GetFilename("USERLBL");
GetUserLabel(sUserLbl, pdsLabel, bLevel2);
}
// Calculate CheckSum
Statistics * cStats = cInCube->Statistics();
iCheckSum = (unsigned int )cStats->Sum();
FixLabel(pdsLabel, bLevel2);
// Add an output format template to the PDS PVL
// Distinguish betweeen Level 2 and 3 images by calling the camera()
// function as only non mosaic images(Level2) have a camera
if (bLevel2) {
pdsLabel.SetFormatTemplate ("$lro/translations/mrfPdsLevel2.pft");
} else {
pdsLabel.SetFormatTemplate ("$lro/translations/mrfPdsLevel3.pft");
}
size_t iFound = outFilename.find(".lbl");
outFilename.replace(iFound, 4, ".img");
ofstream oCube(outFilename.c_str());
cProcess.OutputDetatchedLabel();
//cProcess.OutputLabel(oCube);
cProcess.StartProcess(oCube);
oCube.close();
cProcess.EndProcess();
}