/// ProcessInstruction - Given an instruction in the loop, check to see if it
/// has any uses that are outside the current loop. If so, insert LCSSA PHI
/// nodes and rewrite the uses.
bool LCSSA::ProcessInstruction(Instruction *Inst,
const SmallVectorImpl<BasicBlock*> &ExitBlocks) {
SmallVector<Use*, 16> UsesToRewrite;
BasicBlock *InstBB = Inst->getParent();
for (Value::use_iterator UI = Inst->use_begin(), E = Inst->use_end();
UI != E; ++UI) {
User *U = *UI;
BasicBlock *UserBB = cast<Instruction>(U)->getParent();
if (PHINode *PN = dyn_cast<PHINode>(U))
UserBB = PN->getIncomingBlock(UI);
if (InstBB != UserBB && !inLoop(UserBB))
UsesToRewrite.push_back(&UI.getUse());
}
// If there are no uses outside the loop, exit with no change.
if (UsesToRewrite.empty()) return false;
++NumLCSSA; // We are applying the transformation
// Invoke instructions are special in that their result value is not available
// along their unwind edge. The code below tests to see whether DomBB dominates
// the value, so adjust DomBB to the normal destination block, which is
// effectively where the value is first usable.
BasicBlock *DomBB = Inst->getParent();
if (InvokeInst *Inv = dyn_cast<InvokeInst>(Inst))
DomBB = Inv->getNormalDest();
DomTreeNode *DomNode = DT->getNode(DomBB);
SSAUpdater SSAUpdate;
SSAUpdate.Initialize(Inst->getType(), Inst->getName());
// Insert the LCSSA phi's into all of the exit blocks dominated by the
// value, and add them to the Phi's map.
for (SmallVectorImpl<BasicBlock*>::const_iterator BBI = ExitBlocks.begin(),
BBE = ExitBlocks.end(); BBI != BBE; ++BBI) {
BasicBlock *ExitBB = *BBI;
if (!DT->dominates(DomNode, DT->getNode(ExitBB))) continue;
// If we already inserted something for this BB, don't reprocess it.
if (SSAUpdate.HasValueForBlock(ExitBB)) continue;
PHINode *PN = PHINode::Create(Inst->getType(), Inst->getName()+".lcssa",
ExitBB->begin());
PN->reserveOperandSpace(PredCache.GetNumPreds(ExitBB));
// Add inputs from inside the loop for this PHI.
for (BasicBlock **PI = PredCache.GetPreds(ExitBB); *PI; ++PI) {
PN->addIncoming(Inst, *PI);
// If the exit block has a predecessor not within the loop, arrange for
// the incoming value use corresponding to that predecessor to be
// rewritten in terms of a different LCSSA PHI.
if (!inLoop(*PI))
UsesToRewrite.push_back(
&PN->getOperandUse(
PN->getOperandNumForIncomingValue(PN->getNumIncomingValues()-1)));
}
// Remember that this phi makes the value alive in this block.
SSAUpdate.AddAvailableValue(ExitBB, PN);
}
// Rewrite all uses outside the loop in terms of the new PHIs we just
// inserted.
for (unsigned i = 0, e = UsesToRewrite.size(); i != e; ++i) {
// If this use is in an exit block, rewrite to use the newly inserted PHI.
// This is required for correctness because SSAUpdate doesn't handle uses in
// the same block. It assumes the PHI we inserted is at the end of the
// block.
Instruction *User = cast<Instruction>(UsesToRewrite[i]->getUser());
BasicBlock *UserBB = User->getParent();
if (PHINode *PN = dyn_cast<PHINode>(User))
UserBB = PN->getIncomingBlock(*UsesToRewrite[i]);
if (isa<PHINode>(UserBB->begin()) &&
isExitBlock(UserBB, ExitBlocks)) {
UsesToRewrite[i]->set(UserBB->begin());
continue;
}
// Otherwise, do full PHI insertion.
SSAUpdate.RewriteUse(*UsesToRewrite[i]);
}
return true;
}
/// For every instruction from the worklist, check to see if it has any uses
/// that are outside the current loop. If so, insert LCSSA PHI nodes and
/// rewrite the uses.
bool llvm::formLCSSAForInstructions(SmallVectorImpl<Instruction *> &Worklist,
DominatorTree &DT, LoopInfo &LI) {
SmallVector<Use *, 16> UsesToRewrite;
SmallSetVector<PHINode *, 16> PHIsToRemove;
PredIteratorCache PredCache;
bool Changed = false;
// Cache the Loop ExitBlocks across this loop. We expect to get a lot of
// instructions within the same loops, computing the exit blocks is
// expensive, and we're not mutating the loop structure.
SmallDenseMap<Loop*, SmallVector<BasicBlock *,1>> LoopExitBlocks;
while (!Worklist.empty()) {
UsesToRewrite.clear();
Instruction *I = Worklist.pop_back_val();
BasicBlock *InstBB = I->getParent();
Loop *L = LI.getLoopFor(InstBB);
if (!LoopExitBlocks.count(L))
L->getExitBlocks(LoopExitBlocks[L]);
assert(LoopExitBlocks.count(L));
const SmallVectorImpl<BasicBlock *> &ExitBlocks = LoopExitBlocks[L];
if (ExitBlocks.empty())
continue;
// Tokens cannot be used in PHI nodes, so we skip over them.
// We can run into tokens which are live out of a loop with catchswitch
// instructions in Windows EH if the catchswitch has one catchpad which
// is inside the loop and another which is not.
if (I->getType()->isTokenTy())
continue;
for (Use &U : I->uses()) {
Instruction *User = cast<Instruction>(U.getUser());
BasicBlock *UserBB = User->getParent();
if (PHINode *PN = dyn_cast<PHINode>(User))
UserBB = PN->getIncomingBlock(U);
if (InstBB != UserBB && !L->contains(UserBB))
UsesToRewrite.push_back(&U);
}
// If there are no uses outside the loop, exit with no change.
if (UsesToRewrite.empty())
continue;
++NumLCSSA; // We are applying the transformation
// Invoke instructions are special in that their result value is not
// available along their unwind edge. The code below tests to see whether
// DomBB dominates the value, so adjust DomBB to the normal destination
// block, which is effectively where the value is first usable.
BasicBlock *DomBB = InstBB;
if (InvokeInst *Inv = dyn_cast<InvokeInst>(I))
DomBB = Inv->getNormalDest();
DomTreeNode *DomNode = DT.getNode(DomBB);
SmallVector<PHINode *, 16> AddedPHIs;
SmallVector<PHINode *, 8> PostProcessPHIs;
SmallVector<PHINode *, 4> InsertedPHIs;
SSAUpdater SSAUpdate(&InsertedPHIs);
SSAUpdate.Initialize(I->getType(), I->getName());
// Insert the LCSSA phi's into all of the exit blocks dominated by the
// value, and add them to the Phi's map.
for (BasicBlock *ExitBB : ExitBlocks) {
if (!DT.dominates(DomNode, DT.getNode(ExitBB)))
continue;
// If we already inserted something for this BB, don't reprocess it.
if (SSAUpdate.HasValueForBlock(ExitBB))
continue;
PHINode *PN = PHINode::Create(I->getType(), PredCache.size(ExitBB),
I->getName() + ".lcssa", &ExitBB->front());
// Add inputs from inside the loop for this PHI.
for (BasicBlock *Pred : PredCache.get(ExitBB)) {
PN->addIncoming(I, Pred);
// If the exit block has a predecessor not within the loop, arrange for
// the incoming value use corresponding to that predecessor to be
// rewritten in terms of a different LCSSA PHI.
if (!L->contains(Pred))
UsesToRewrite.push_back(
&PN->getOperandUse(PN->getOperandNumForIncomingValue(
PN->getNumIncomingValues() - 1)));
}
AddedPHIs.push_back(PN);
// Remember that this phi makes the value alive in this block.
SSAUpdate.AddAvailableValue(ExitBB, PN);
// LoopSimplify might fail to simplify some loops (e.g. when indirect
// branches are involved). In such situations, it might happen that an
// exit for Loop L1 is the header of a disjoint Loop L2. Thus, when we
// create PHIs in such an exit block, we are also inserting PHIs into L2's
// header. This could break LCSSA form for L2 because these inserted PHIs
// can also have uses outside of L2. Remember all PHIs in such situation
// as to revisit than later on. FIXME: Remove this if indirectbr support
// into LoopSimplify gets improved.
if (auto *OtherLoop = LI.getLoopFor(ExitBB))
if (!L->contains(OtherLoop))
PostProcessPHIs.push_back(PN);
}
// Rewrite all uses outside the loop in terms of the new PHIs we just
// inserted.
for (Use *UseToRewrite : UsesToRewrite) {
// If this use is in an exit block, rewrite to use the newly inserted PHI.
// This is required for correctness because SSAUpdate doesn't handle uses
// in the same block. It assumes the PHI we inserted is at the end of the
// block.
Instruction *User = cast<Instruction>(UseToRewrite->getUser());
BasicBlock *UserBB = User->getParent();
if (PHINode *PN = dyn_cast<PHINode>(User))
UserBB = PN->getIncomingBlock(*UseToRewrite);
if (isa<PHINode>(UserBB->begin()) && isExitBlock(UserBB, ExitBlocks)) {
// Tell the VHs that the uses changed. This updates SCEV's caches.
if (UseToRewrite->get()->hasValueHandle())
ValueHandleBase::ValueIsRAUWd(*UseToRewrite, &UserBB->front());
UseToRewrite->set(&UserBB->front());
continue;
}
// Otherwise, do full PHI insertion.
SSAUpdate.RewriteUse(*UseToRewrite);
}
// SSAUpdater might have inserted phi-nodes inside other loops. We'll need
// to post-process them to keep LCSSA form.
for (PHINode *InsertedPN : InsertedPHIs) {
if (auto *OtherLoop = LI.getLoopFor(InsertedPN->getParent()))
if (!L->contains(OtherLoop))
PostProcessPHIs.push_back(InsertedPN);
}
// Post process PHI instructions that were inserted into another disjoint
// loop and update their exits properly.
for (auto *PostProcessPN : PostProcessPHIs) {
if (PostProcessPN->use_empty())
continue;
// Reprocess each PHI instruction.
Worklist.push_back(PostProcessPN);
}
// Keep track of PHI nodes that we want to remove because they did not have
// any uses rewritten.
for (PHINode *PN : AddedPHIs)
if (PN->use_empty())
PHIsToRemove.insert(PN);
Changed = true;
}
// Remove PHI nodes that did not have any uses rewritten.
for (PHINode *PN : PHIsToRemove) {
assert (PN->use_empty() && "Trying to remove a phi with uses.");
PN->eraseFromParent();
}
return Changed;
}
/// Given an instruction in the loop, check to see if it has any uses that are
/// outside the current loop. If so, insert LCSSA PHI nodes and rewrite the
/// uses.
static bool processInstruction(Loop &L, Instruction &Inst, DominatorTree &DT,
const SmallVectorImpl<BasicBlock *> &ExitBlocks,
PredIteratorCache &PredCache, LoopInfo *LI) {
SmallVector<Use *, 16> UsesToRewrite;
// Tokens cannot be used in PHI nodes, so we skip over them.
// We can run into tokens which are live out of a loop with catchswitch
// instructions in Windows EH if the catchswitch has one catchpad which
// is inside the loop and another which is not.
if (Inst.getType()->isTokenTy())
return false;
BasicBlock *InstBB = Inst.getParent();
for (Use &U : Inst.uses()) {
Instruction *User = cast<Instruction>(U.getUser());
BasicBlock *UserBB = User->getParent();
if (PHINode *PN = dyn_cast<PHINode>(User))
UserBB = PN->getIncomingBlock(U);
if (InstBB != UserBB && !L.contains(UserBB))
UsesToRewrite.push_back(&U);
}
// If there are no uses outside the loop, exit with no change.
if (UsesToRewrite.empty())
return false;
++NumLCSSA; // We are applying the transformation
// Invoke instructions are special in that their result value is not available
// along their unwind edge. The code below tests to see whether DomBB
// dominates the value, so adjust DomBB to the normal destination block,
// which is effectively where the value is first usable.
BasicBlock *DomBB = Inst.getParent();
if (InvokeInst *Inv = dyn_cast<InvokeInst>(&Inst))
DomBB = Inv->getNormalDest();
DomTreeNode *DomNode = DT.getNode(DomBB);
SmallVector<PHINode *, 16> AddedPHIs;
SmallVector<PHINode *, 8> PostProcessPHIs;
SSAUpdater SSAUpdate;
SSAUpdate.Initialize(Inst.getType(), Inst.getName());
// Insert the LCSSA phi's into all of the exit blocks dominated by the
// value, and add them to the Phi's map.
for (BasicBlock *ExitBB : ExitBlocks) {
if (!DT.dominates(DomNode, DT.getNode(ExitBB)))
continue;
// If we already inserted something for this BB, don't reprocess it.
if (SSAUpdate.HasValueForBlock(ExitBB))
continue;
PHINode *PN = PHINode::Create(Inst.getType(), PredCache.size(ExitBB),
Inst.getName() + ".lcssa", &ExitBB->front());
// Add inputs from inside the loop for this PHI.
for (BasicBlock *Pred : PredCache.get(ExitBB)) {
PN->addIncoming(&Inst, Pred);
// If the exit block has a predecessor not within the loop, arrange for
// the incoming value use corresponding to that predecessor to be
// rewritten in terms of a different LCSSA PHI.
if (!L.contains(Pred))
UsesToRewrite.push_back(
&PN->getOperandUse(PN->getOperandNumForIncomingValue(
PN->getNumIncomingValues() - 1)));
}
AddedPHIs.push_back(PN);
// Remember that this phi makes the value alive in this block.
SSAUpdate.AddAvailableValue(ExitBB, PN);
// LoopSimplify might fail to simplify some loops (e.g. when indirect
// branches are involved). In such situations, it might happen that an exit
// for Loop L1 is the header of a disjoint Loop L2. Thus, when we create
// PHIs in such an exit block, we are also inserting PHIs into L2's header.
// This could break LCSSA form for L2 because these inserted PHIs can also
// have uses outside of L2. Remember all PHIs in such situation as to
// revisit than later on. FIXME: Remove this if indirectbr support into
// LoopSimplify gets improved.
if (auto *OtherLoop = LI->getLoopFor(ExitBB))
if (!L.contains(OtherLoop))
PostProcessPHIs.push_back(PN);
}
// Rewrite all uses outside the loop in terms of the new PHIs we just
// inserted.
for (Use *UseToRewrite : UsesToRewrite) {
// If this use is in an exit block, rewrite to use the newly inserted PHI.
// This is required for correctness because SSAUpdate doesn't handle uses in
// the same block. It assumes the PHI we inserted is at the end of the
// block.
Instruction *User = cast<Instruction>(UseToRewrite->getUser());
BasicBlock *UserBB = User->getParent();
if (PHINode *PN = dyn_cast<PHINode>(User))
UserBB = PN->getIncomingBlock(*UseToRewrite);
if (isa<PHINode>(UserBB->begin()) && isExitBlock(UserBB, ExitBlocks)) {
// Tell the VHs that the uses changed. This updates SCEV's caches.
if (UseToRewrite->get()->hasValueHandle())
ValueHandleBase::ValueIsRAUWd(*UseToRewrite, &UserBB->front());
UseToRewrite->set(&UserBB->front());
continue;
}
// Otherwise, do full PHI insertion.
SSAUpdate.RewriteUse(*UseToRewrite);
}
// Post process PHI instructions that were inserted into another disjoint loop
// and update their exits properly.
for (auto *I : PostProcessPHIs) {
if (I->use_empty())
continue;
BasicBlock *PHIBB = I->getParent();
Loop *OtherLoop = LI->getLoopFor(PHIBB);
SmallVector<BasicBlock *, 8> EBs;
OtherLoop->getExitBlocks(EBs);
if (EBs.empty())
continue;
// Recurse and re-process each PHI instruction. FIXME: we should really
// convert this entire thing to a worklist approach where we process a
// vector of instructions...
processInstruction(*OtherLoop, *I, DT, EBs, PredCache, LI);
}
// Remove PHI nodes that did not have any uses rewritten.
for (PHINode *PN : AddedPHIs)
if (PN->use_empty())
PN->eraseFromParent();
return true;
}
