//
// Displays the values from memory in the GUI.
//
void CPageDisk::ShowData()
{
Manager *manager;
Worker *worker;
// Only enable the display if a disk worker or a manager with disk
// interfaces is selected.
manager = theApp.pView->m_pWorkerView->GetSelectedManager();
worker = theApp.pView->m_pWorkerView->GetSelectedWorker();
if (( theApp.pView->m_pWorkerView->GetSelectedType() == ALL_MANAGERS) ||
( manager && !manager->InterfaceCount( GenericDiskType ) ) ||
( worker && !IsType( worker->Type(), GenericDiskType ) ) )
{
Reset();
return;
}
// This is a new view of the target assignment.
// It has not been modified.
selected = NULL;
highlighted = NULL;
// Show the target list.
ShowTargets();
// Set the target selection check boxes.
ShowTargetSelection();
// Bold the last selected item.
ShowFocus();
// Show the connection rate settings.
ShowConnectionRate();
// Show the disk specific settings.
ShowSettings();
// Enable the apropriate windows and redraw the page.
EnableWindow();
}
//
// Displays the connection rate settings for the current selection in the
// worker view. If the selection is a manager or all managers, displays
// a value if all the children's values are the same.
//
void CPageNetwork::ShowConnectionRate()
{
Manager *manager;
Worker *worker;
int trans_per_conn;
int test_connection_rate;
switch ( theApp.pView->m_pWorkerView->GetSelectedType() )
{
case WORKER:
worker = theApp.pView->m_pWorkerView->GetSelectedWorker();
// update controls with worker's data
if ( IsType( worker->Type(), GenericNetType ) )
{
trans_per_conn = worker->GetTransPerConn( GenericNetType );
test_connection_rate = worker->GetConnectionRate( GenericNetType );
}
break;
case MANAGER:
manager = theApp.pView->m_pWorkerView->GetSelectedManager();
trans_per_conn = manager->GetTransPerConn( GenericServerType );
test_connection_rate = manager->GetConnectionRate( GenericServerType );
break;
default:
trans_per_conn =
theApp.manager_list.GetTransPerConn( GenericServerType );
test_connection_rate =
theApp.manager_list.GetConnectionRate( GenericServerType );
break;
}
// If the test connection rate settings are different between a manager's
// workers, set the state of the check box to AUTO3STATE and disable the
// edit box and spin control.
SetDlgItemInt( EConnectionRate, trans_per_conn );
if ( test_connection_rate == AMBIGUOUS_VALUE )
{
m_CConnectionRate.SetButtonStyle( BS_AUTO3STATE );
m_EConnectionRate.SetPasswordChar( 32 );
m_EConnectionRate.Invalidate( TRUE );
// Set check box to undetermined state.
CheckDlgButton( CConnectionRate, 2 );
}
else
{
m_CConnectionRate.SetButtonStyle( BS_AUTOCHECKBOX );
CheckDlgButton( CConnectionRate, test_connection_rate );
if ( test_connection_rate == ENABLED_VALUE && trans_per_conn !=
AMBIGUOUS_VALUE )
{
m_EConnectionRate.SetPasswordChar( 0 );
}
else
{
m_EConnectionRate.SetPasswordChar( 32 );
m_EConnectionRate.Invalidate();
}
}
}
//
// Displays the fixed seed value for the current selection in the
// worker view. If the selection is a manager or all managers, displays
// a value if all the children's values are the same.
//
void CPageDisk::ShowFixedSeedValue()
{
Manager *manager;
Worker *worker;
DWORDLONG fixed_seed_value = 0;
BOOL use_fixed_seed = 0;
switch (theApp.pView->m_pWorkerView->GetSelectedType()) {
case WORKER:
// update controls with worker's data
worker = theApp.pView->m_pWorkerView->GetSelectedWorker();
if (IsType(worker->Type(), GenericDiskType)) {
fixed_seed_value = worker->GetFixedSeedValue(GenericDiskType);
use_fixed_seed = worker->GetUseFixedSeed(GenericDiskType);
}
break;
case MANAGER:
manager = theApp.pView->m_pWorkerView->GetSelectedManager();
fixed_seed_value = manager->GetFixedSeedValue(GenericDiskType);
use_fixed_seed = manager->GetUseFixedSeed(GenericDiskType);
break;
default:
fixed_seed_value = theApp.manager_list.GetFixedSeedValue(GenericDiskType);
use_fixed_seed = theApp.manager_list.GetUseFixedSeed(GenericDiskType);
break;
}
// If the fixed seed values are different between a manager's
// workers, set the state of the check box to AUTO3STATE and disable the
// edit box and spin control.
SetDlgItemInt64(EFixedSeed, fixed_seed_value, false);
if (use_fixed_seed == AMBIGUOUS_VALUE) {
m_CUseFixedSeed.SetButtonStyle(BS_AUTO3STATE);
m_EFixedSeed.SetPasswordChar(32);
m_EFixedSeed.Invalidate(TRUE);
// Set check box to undetermined state.
CheckDlgButton(CUseFixedSeed, 2);
} else {
m_CUseFixedSeed.SetButtonStyle(BS_AUTOCHECKBOX);
CheckDlgButton(CUseFixedSeed, use_fixed_seed);
if (use_fixed_seed == ENABLED_VALUE && fixed_seed_value != (DWORDLONG)AMBIGUOUS_VALUE) {
m_EFixedSeed.SetPasswordChar(0);
} else {
m_EFixedSeed.SetPasswordChar(32);
m_EFixedSeed.Invalidate();
}
}
}
//
// Enables the assigned list and add button based on the input variable.
// Verifies that enabling is allowed before enabling.
//
void CPageAccess::SetAssignedAccess( BOOL enable )
{
Manager *mgr;
Worker *wkr;
BOOL enabling_worker;
// Get the currently selected manager and worker.
switch ( theApp.pView->m_pWorkerView->GetSelectedType() )
{
case ALL_MANAGERS:
// Allow enabling if there are any workers,
enabling_worker = theApp.manager_list.WorkerCount();
break;
case MANAGER:
mgr = theApp.pView->m_pWorkerView->GetSelectedManager();
// Allow enabling if there are non-client workers.
enabling_worker = ( mgr->WorkerCount() >
mgr->WorkerCount( GenericClientType ) );
break;
case WORKER:
wkr = theApp.pView->m_pWorkerView->GetSelectedWorker();
// Allow enabling if it's not a client.
enabling_worker = !IsType( wkr->Type(), GenericClientType );
break;
}
m_LAssignedAccess.EnableWindow( enable && enabling_worker &&
theApp.test_state == TestIdle );
m_BAdd.EnableWindow( enable && enabling_worker && theApp.test_state == TestIdle &&
( m_LGlobalAccess.GetNextItem( FIND_FIRST, LVNI_SELECTED ) != -1 ) );
m_LAssignedAccess.RedrawWindow();
m_BAdd.RedrawWindow();
}
void CPageDisk::ShowDataPattern()
{
Manager *manager;
Worker *worker;
int data_pattern = 1;
switch (theApp.pView->m_pWorkerView->GetSelectedType()) {
case WORKER:
// update controls with worker's data
worker = theApp.pView->m_pWorkerView->GetSelectedWorker();
if (IsType(worker->Type(), GenericDiskType)) {
data_pattern = worker->GetDataPattern(GenericDiskType);
}
break;
case MANAGER:
manager = theApp.pView->m_pWorkerView->GetSelectedManager();
data_pattern = manager->GetDataPattern(GenericDiskType);
break;
default:
data_pattern = theApp.manager_list.GetDataPattern(GenericDiskType);
break;
}
m_CDataPattern.SetCurSel(data_pattern);
}
//
// Enabling controls on the form for user access.
//
void CPageDisk::EnableWindow( BOOL enable )
{
Manager *manager;
Worker *worker;
CWnd *last_focused;
// Only enable things if a test is not running.
if ( theApp.test_state != TestIdle )
return;
// Get the current worker and manager selections.
manager = theApp.pView->m_pWorkerView->GetSelectedManager();
worker = theApp.pView->m_pWorkerView->GetSelectedWorker();
switch ( theApp.pView->m_pWorkerView->GetSelectedType() )
{
case WORKER:
// Enable the target list only if the selected worker is a disk worker.
enable = enable && IsType( worker->Type(), GenericDiskType );
m_TTargets.EnableWindow( enable );
// If the selected worker is not a disk worker, switch to the network
// target page.
if ( !IsType( worker->Type(), GenericDiskType ) &&
theApp.pView->m_pPropSheet->GetActiveIndex() == DISK_PAGE )
{
last_focused = GetFocus();
theApp.pView->m_pPropSheet->SetActivePage( NETWORK_PAGE );
if ( last_focused )
last_focused->SetFocus();
}
break;
case MANAGER:
// Enable the target list only if the selected manager has a
// disk worker.
enable = enable && manager->WorkerCount( GenericDiskType );
m_TTargets.EnableWindow( enable );
// If the selected manager has no disk workers but has network server
// workers, switch to the network target page.
if ( !manager->WorkerCount( GenericDiskType ) &&
manager->WorkerCount( GenericServerType ) &&
theApp.pView->m_pPropSheet->GetActiveIndex() == DISK_PAGE )
{
enable = FALSE;
last_focused = GetFocus();
theApp.pView->m_pPropSheet->SetActivePage( NETWORK_PAGE );
if ( last_focused )
last_focused->SetFocus();
}
break;
case ALL_MANAGERS:
// Only enable the connection rate controls if there exists a
// GenericDiskType worker.
enable = enable && theApp.manager_list.WorkerCount( GenericDiskType );
// The target list is disabled for all managers.
m_TTargets.EnableWindow( FALSE );
}
// Enable the connection rate check box.
m_CConnectionRate.EnableWindow( enable );
// Enable the connection rate edit box and spin control if the connection
// rate check box is checked.
m_EConnectionRate.EnableWindow( enable &&
m_CConnectionRate.GetCheck() == 1 );
m_SConnectionRate.EnableWindow( enable &&
m_CConnectionRate.GetCheck() == 1 );
// Enable the disk parameter controls.
m_EDiskStart.EnableWindow( enable );
m_EDiskSize.EnableWindow( enable );
m_EQueueDepth.EnableWindow( enable );
// The spin button sometimes needs to be redrawn even if it didn't change
// when the edit box was partially redrawn.
m_SConnectionRate.Invalidate( TRUE );
// Redraw the page. Note that all the child windows will be redrawn too.
// Also note that only windows that have already been invalidated will get
// redrawn, avoiding much flicker.
RedrawWindow( NULL, NULL, RDW_ALLCHILDREN | RDW_UPDATENOW | RDW_ERASE );
}
//
// Enable or disable the tab's windows, if apropriate.
//
void CPageNetwork::EnableWindow(BOOL enable)
{
Manager *manager;
Worker *worker;
int selected_type;
CWnd *last_focused;
BOOL enable_max_sends = false;
// Only enable thingies if a test is not running.
if (theApp.test_state != TestIdle)
return;
selected_type = theApp.pView->m_pWorkerView->GetSelectedType();
switch (selected_type) {
case WORKER:
// Get the current worker selection.
worker = theApp.pView->m_pWorkerView->GetSelectedWorker();
enable = enable && IsType(worker->Type(), GenericServerType);
enable_max_sends = enable && IsType(worker->Type(), VIServerType);
// If the selected worker is a disk worker,
// switch to the disk targets page.
if (IsType(worker->Type(), GenericDiskType) &&
theApp.pView->m_pPropSheet->GetActiveIndex() == NETWORK_PAGE) {
last_focused = GetFocus();
theApp.pView->m_pPropSheet->SetActivePage(DISK_PAGE);
if (last_focused)
last_focused->SetFocus();
}
break;
case MANAGER:
// Get the current manager selection.
manager = theApp.pView->m_pWorkerView->GetSelectedManager();
enable = enable && manager->WorkerCount(GenericServerType);
enable_max_sends = enable && manager->WorkerCount(VIServerType);
// If the selected manager has no network servers but has disk workers,
// switch to the disk targets page.
if (!manager->WorkerCount(GenericServerType) &&
manager->WorkerCount(GenericDiskType) &&
theApp.pView->m_pPropSheet->GetActiveIndex() == NETWORK_PAGE) {
enable = FALSE;
last_focused = GetFocus();
theApp.pView->m_pPropSheet->SetActivePage(DISK_PAGE);
if (last_focused)
last_focused->SetFocus();
}
break;
case ALL_MANAGERS:
// Only enable the connection rate controls if there exists a
// server worker.
enable = enable && theApp.manager_list.WorkerCount(GenericServerType);
enable_max_sends = enable && (theApp.manager_list.WorkerCount(VIServerType));
}
// Do not enable the target list for all managers.
m_TTargets.EnableWindow(enable && selected_type != ALL_MANAGERS);
m_DInterface.EnableWindow(enable && selected_type != ALL_MANAGERS);
m_EMaxSends.EnableWindow(enable_max_sends);
// Enable the connection rate check box.
m_CConnectionRate.EnableWindow(enable);
// Enable the connection rate edit box and spin control if the connection
// rate check box is checked.
m_EConnectionRate.EnableWindow(enable && m_CConnectionRate.GetCheck() == 1);
m_SConnectionRate.EnableWindow(enable && m_CConnectionRate.GetCheck() == 1);
// The spin button sometimes needs to be redrawn even if it didn't change
// when the edit box was partially redrawn.
m_SConnectionRate.Invalidate(TRUE);
// Redraw the page. Note that all the child windows will be redrawn too.
// Also note that only windows that have already been invalidated will get
// redrawn, avoiding much flicker.
RedrawWindow(NULL, NULL, RDW_ALLCHILDREN | RDW_UPDATENOW | RDW_ERASE);
}
//
// This function is called whenever the selection in the WorkerView changes.
// If the selection changes to a worker, it displays that worker's access
// spec assignment.
//
void CPageAccess::ShowAssignedAccess()
{
int m, w, s, mgr_count, wkr_count, spec_count;
Manager *mgr;
Worker *wkr = NULL;
Test_Spec *spec;
// Clear the list of assigned access specs.
m_LAssignedAccess.DeleteAllItems();
// find out who is selected: All managers, a manager, or a worker.
switch ( theApp.pView->m_pWorkerView->GetSelectedType() )
{
case ALL_MANAGERS:
// Disable the Assigned Access Spec listbox if there are no workers.
if ( !theApp.manager_list.WorkerCount() )
{
SetAssignedAccess( FALSE );
return;
}
// Enable the Assigned Access Spec listbox.
SetAssignedAccess( TRUE );
// Only display items in the listbox if all the descended workers
// have the same access spec list.
if ( !theApp.manager_list.AreAccessSpecsIdentical() )
return;
// All access specs are the same. Show the specs stored by any worker.
// Find a manager with any non-client workers.
mgr_count = theApp.manager_list.ManagerCount();
for ( m = 0; m < mgr_count; m++ )
{
mgr = theApp.manager_list.GetManager( m );
wkr_count = mgr->WorkerCount();
if ( wkr_count > mgr->WorkerCount( GenericClientType ) )
break;
}
// Find the manager's first non-client worker.
for ( w = 0; w < wkr_count; w++ )
{
// Find the first non-client worker.
wkr = mgr->GetWorker( w );
if ( !IsType( wkr->Type(), GenericClientType ) )
break;
}
break;
case MANAGER:
mgr = theApp.pView->m_pWorkerView->GetSelectedManager();
wkr_count = mgr->WorkerCount();
// Disable the access spec list if there are no non-client workers.
if ( wkr_count == mgr->WorkerCount( GenericClientType ) )
{
SetAssignedAccess( FALSE );
return;
}
// Enable the Assigned Access Spec listbox.
SetAssignedAccess( TRUE );
// Only display items in the listbox if all the descended workers
// have the same access spec list.
if ( !mgr->AreAccessSpecsIdentical() )
return;
// All the access specs are the same.
// Find the first non-client worker.
for ( w = 0; w < wkr_count; w++ )
{
wkr = mgr->GetWorker( w );
if ( !IsType( wkr->Type(), GenericClientType ) )
break;
}
break;
case WORKER:
wkr = theApp.pView->m_pWorkerView->GetSelectedWorker();
if ( IsType( wkr->Type(), GenericClientType ) )
{
// Worker is a net client. Display it's net server's spec
// assignment, but disable the view.
wkr = wkr->net_partner;
SetAssignedAccess( FALSE );
}
else
{
SetAssignedAccess( TRUE );
}
break;
}
if ( !wkr )
{
ErrorMessage( "No valid worker in CPageAccess::ShowAssignedAccess()." );
return;
}
// Add the Access Spec to the assigned access spec list view.
spec_count = wkr->AccessSpecCount();
for ( s = 0; s < spec_count; s++ )
{
spec = wkr->GetAccessSpec( s );
// Set the data portion to pointer to the access spec in the
// worker's access spec list.
m_LAssignedAccess.InsertItem( LVIF_TEXT | LVIF_PARAM | LVIF_IMAGE,
s, spec->name, NULL, LVIS_SELECTED, BLUE,
(ULONG_PTR)spec );
}
}
