bool PNS_LINE_PLACER::buildInitialLine( const VECTOR2I& aP, PNS_LINE& aHead )
{
SHAPE_LINE_CHAIN l;
if( m_p_start == aP )
{
l.Clear();
}
else
{
if( Settings().GetFreeAngleMode() && Settings().Mode() == RM_MarkObstacles )
{
l = SHAPE_LINE_CHAIN( m_p_start, aP );
}
else
{
l = m_direction.BuildInitialTrace( m_p_start, aP );
}
if( l.SegmentCount() > 1 && m_orthoMode )
{
VECTOR2I newLast = l.CSegment( 0 ).LineProject( l.CPoint( -1 ) );
l.Remove( -1, -1 );
l.Point( 1 ) = newLast;
}
}
aHead.SetShape( l );
if( !m_placingVia )
return true;
PNS_VIA v( makeVia( aP ) );
v.SetNet( aHead.Net() );
if( m_currentMode == RM_MarkObstacles )
{
aHead.AppendVia( v );
return true;
}
VECTOR2I force;
VECTOR2I lead = aP - m_p_start;
bool solidsOnly = ( m_currentMode != RM_Walkaround );
if( v.PushoutForce( m_currentNode, lead, force, solidsOnly, 40 ) )
{
SHAPE_LINE_CHAIN line = m_direction.BuildInitialTrace( m_p_start, aP + force );
aHead = PNS_LINE( aHead, line );
v.SetPos( v.Pos() + force );
return true;
}
return false; // via placement unsuccessful
}
static void drawGw( VECTOR2I p, int color )
{
SHAPE_LINE_CHAIN l;
l.Append( p - VECTOR2I( -50000, -50000 ) );
l.Append( p + VECTOR2I( -50000, -50000 ) );
l.Clear();
l.Append( p - VECTOR2I( 50000, -50000 ) );
l.Append( p + VECTOR2I( 50000, -50000 ) );
}
void AddPoint( VECTOR2I aP, int aColor )
{
SHAPE_LINE_CHAIN l;
l.Append( aP - VECTOR2I( -50000, -50000 ) );
l.Append( aP + VECTOR2I( -50000, -50000 ) );
AddLine ( l, aColor, 10000 );
l.Clear();
l.Append( aP - VECTOR2I( 50000, -50000 ) );
l.Append( aP + VECTOR2I( 50000, -50000 ) );
AddLine( l, aColor, 10000 );
}
void DrawDebugPoint( VECTOR2I aP, int aColor )
{
SHAPE_LINE_CHAIN l;
l.Append( aP - VECTOR2I( -50000, -50000 ) );
l.Append( aP + VECTOR2I( -50000, -50000 ) );
ROUTER::GetInstance()->DisplayDebugLine ( l, aColor, 10000 );
l.Clear();
l.Append( aP - VECTOR2I( 50000, -50000 ) );
l.Append( aP + VECTOR2I( 50000, -50000 ) );
ROUTER::GetInstance()->DisplayDebugLine( l, aColor, 10000 );
}
bool PNS_TOPOLOGY::LeadingRatLine( const PNS_LINE* aTrack, SHAPE_LINE_CHAIN& aRatLine )
{
PNS_LINE track( *aTrack );
VECTOR2I end;
if( !track.PointCount() )
return false;
std::unique_ptr<PNS_NODE> tmpNode( m_world->Branch() );
tmpNode->Add( &track );
PNS_JOINT* jt = tmpNode->FindJoint( track.CPoint( -1 ), &track );
if( !jt )
return false;
if( ( !track.EndsWithVia() && jt->LinkCount() >= 2 ) || ( track.EndsWithVia() && jt->LinkCount() >= 3 ) ) // we got something connected
{
end = jt->Pos();
}
else
{
int anchor;
PNS_TOPOLOGY topo( tmpNode.get() );
PNS_ITEM* it = topo.NearestUnconnectedItem( jt, &anchor );
if( !it )
return false;
end = it->Anchor( anchor );
}
aRatLine.Clear();
aRatLine.Append( track.CPoint( -1 ) );
aRatLine.Append( end );
return true;
}
void ZONE_FILLER::buildUnconnectedThermalStubsPolygonList( SHAPE_POLY_SET& aCornerBuffer,
const ZONE_CONTAINER* aZone,
const SHAPE_POLY_SET& aRawFilledArea,
double aArcCorrection,
double aRoundPadThermalRotation ) const
{
SHAPE_LINE_CHAIN spokes;
BOX2I itemBB;
VECTOR2I ptTest[4];
auto zoneBB = aRawFilledArea.BBox();
int zone_clearance = aZone->GetZoneClearance();
int biggest_clearance = m_board->GetDesignSettings().GetBiggestClearanceValue();
biggest_clearance = std::max( biggest_clearance, zone_clearance );
zoneBB.Inflate( biggest_clearance );
// half size of the pen used to draw/plot zones outlines
int pen_radius = aZone->GetMinThickness() / 2;
for( auto module : m_board->Modules() )
{
for( auto pad : module->Pads() )
{
// Rejects non-standard pads with tht-only thermal reliefs
if( aZone->GetPadConnection( pad ) == PAD_ZONE_CONN_THT_THERMAL
&& pad->GetAttribute() != PAD_ATTRIB_STANDARD )
continue;
if( aZone->GetPadConnection( pad ) != PAD_ZONE_CONN_THERMAL
&& aZone->GetPadConnection( pad ) != PAD_ZONE_CONN_THT_THERMAL )
continue;
if( !pad->IsOnLayer( aZone->GetLayer() ) )
continue;
if( pad->GetNetCode() != aZone->GetNetCode() )
continue;
// Calculate thermal bridge half width
int thermalBridgeWidth = aZone->GetThermalReliefCopperBridge( pad )
- aZone->GetMinThickness();
if( thermalBridgeWidth <= 0 )
continue;
// we need the thermal bridge half width
// with a small extra size to be sure we create a stub
// slightly larger than the actual stub
thermalBridgeWidth = ( thermalBridgeWidth + 4 ) / 2;
int thermalReliefGap = aZone->GetThermalReliefGap( pad );
itemBB = pad->GetBoundingBox();
itemBB.Inflate( thermalReliefGap );
if( !( itemBB.Intersects( zoneBB ) ) )
continue;
// Thermal bridges are like a segment from a starting point inside the pad
// to an ending point outside the pad
// calculate the ending point of the thermal pad, outside the pad
VECTOR2I endpoint;
endpoint.x = ( pad->GetSize().x / 2 ) + thermalReliefGap;
endpoint.y = ( pad->GetSize().y / 2 ) + thermalReliefGap;
// Calculate the starting point of the thermal stub
// inside the pad
VECTOR2I startpoint;
int copperThickness = aZone->GetThermalReliefCopperBridge( pad )
- aZone->GetMinThickness();
if( copperThickness < 0 )
copperThickness = 0;
// Leave a small extra size to the copper area inside to pad
copperThickness += KiROUND( IU_PER_MM * 0.04 );
startpoint.x = std::min( pad->GetSize().x, copperThickness );
startpoint.y = std::min( pad->GetSize().y, copperThickness );
startpoint.x /= 2;
startpoint.y /= 2;
// This is a CIRCLE pad tweak
// for circle pads, the thermal stubs orientation is 45 deg
double fAngle = pad->GetOrientation();
if( pad->GetShape() == PAD_SHAPE_CIRCLE )
{
endpoint.x = KiROUND( endpoint.x * aArcCorrection );
endpoint.y = endpoint.x;
fAngle = aRoundPadThermalRotation;
}
// contour line width has to be taken into calculation to avoid "thermal stub bleed"
endpoint.x += pen_radius;
endpoint.y += pen_radius;
// compute north, south, west and east points for zone connection.
ptTest[0] = VECTOR2I( 0, endpoint.y ); // lower point
ptTest[1] = VECTOR2I( 0, -endpoint.y ); // upper point
ptTest[2] = VECTOR2I( endpoint.x, 0 ); // right point
ptTest[3] = VECTOR2I( -endpoint.x, 0 ); // left point
// Test all sides
for( int i = 0; i < 4; i++ )
{
// rotate point
RotatePoint( ptTest[i], fAngle );
// translate point
ptTest[i] += pad->ShapePos();
if( aRawFilledArea.Contains( ptTest[i] ) )
continue;
spokes.Clear();
// polygons are rectangles with width of copper bridge value
switch( i )
{
case 0: // lower stub
spokes.Append( -thermalBridgeWidth, endpoint.y );
spokes.Append( +thermalBridgeWidth, endpoint.y );
spokes.Append( +thermalBridgeWidth, startpoint.y );
spokes.Append( -thermalBridgeWidth, startpoint.y );
break;
case 1: // upper stub
spokes.Append( -thermalBridgeWidth, -endpoint.y );
spokes.Append( +thermalBridgeWidth, -endpoint.y );
spokes.Append( +thermalBridgeWidth, -startpoint.y );
spokes.Append( -thermalBridgeWidth, -startpoint.y );
break;
case 2: // right stub
spokes.Append( endpoint.x, -thermalBridgeWidth );
spokes.Append( endpoint.x, thermalBridgeWidth );
spokes.Append( +startpoint.x, thermalBridgeWidth );
spokes.Append( +startpoint.x, -thermalBridgeWidth );
break;
case 3: // left stub
spokes.Append( -endpoint.x, -thermalBridgeWidth );
spokes.Append( -endpoint.x, thermalBridgeWidth );
spokes.Append( -startpoint.x, thermalBridgeWidth );
spokes.Append( -startpoint.x, -thermalBridgeWidth );
break;
}
aCornerBuffer.NewOutline();
// add computed polygon to list
for( int ic = 0; ic < spokes.PointCount(); ic++ )
{
auto cpos = spokes.CPoint( ic );
RotatePoint( cpos, fAngle ); // Rotate according to module orientation
cpos += pad->ShapePos(); // Shift origin to position
aCornerBuffer.Append( cpos );
}
}
}
}
}
bool PNS_LINE::Walkaround( SHAPE_LINE_CHAIN aObstacle, SHAPE_LINE_CHAIN& aPre,
SHAPE_LINE_CHAIN& aWalk, SHAPE_LINE_CHAIN& aPost, bool aCw ) const
{
const SHAPE_LINE_CHAIN& line ( CLine() );
VECTOR2I ip_start;
VECTOR2I ip_end;
if( line.SegmentCount() < 1 )
return false;
if( aObstacle.PointInside( line.CPoint( 0 ) ) || aObstacle.PointInside( line.CPoint( -1 ) ) )
return false;
SHAPE_LINE_CHAIN::INTERSECTIONS ips, ips2;
line.Intersect( aObstacle, ips );
int nearest_dist = INT_MAX;
int farthest_dist = 0;
SHAPE_LINE_CHAIN::INTERSECTION nearest, farthest;
for( int i = 0; i < (int) ips.size(); i++ )
{
const VECTOR2I p = ips[i].p;
int dist = line.PathLength( p );
if( dist < 0 )
return false;
if( dist <= nearest_dist )
{
nearest_dist = dist;
nearest = ips[i];
}
if( dist >= farthest_dist )
{
farthest_dist = dist;
farthest = ips[i];
}
}
if( ips.size() <= 1 || nearest.p == farthest.p )
{
aPre = line;
return true;
}
aPre = line.Slice( 0, nearest.our.Index() );
aPre.Append( nearest.p );
aPre.Simplify();
aWalk.Clear();
aWalk.SetClosed( false );
aWalk.Append( nearest.p );
int i = nearest.their.Index();
assert( nearest.their.Index() >= 0 );
assert( farthest.their.Index() >= 0 );
assert( nearest_dist <= farthest_dist );
aObstacle.Split( nearest.p );
aObstacle.Split( farthest.p );
int i_first = aObstacle.Find( nearest.p );
int i_last = aObstacle.Find( farthest.p );
i = i_first;
while( i != i_last )
{
aWalk.Append( aObstacle.CPoint( i ) );
i += ( aCw ? 1 : -1 );
if( i < 0 )
i = aObstacle.PointCount() - 1;
else if( i == aObstacle.PointCount() )
i = 0;
}
aWalk.Append( farthest.p );
aWalk.Simplify();
aPost.Clear();
aPost.Append( farthest.p );
aPost.Append( line.Slice( farthest.our.Index() + 1, -1 ) );
aPost.Simplify();
return true;
}
