/**
* In a contiguous list of wires, remove wires that backtrack over the previous
* wire. Example:
*
* Wire is added:
* ---------------------------------------->
*
* A second wire backtracks over it:
* -------------------<====================>
*
* RemoveBacktracks is called:
* ------------------->
*/
static void RemoveBacktracks( DLIST<SCH_ITEM>& aWires )
{
SCH_LINE* last_line = NULL;
EDA_ITEM* first = aWires.GetFirst();
for( EDA_ITEM* p = first; p; )
{
SCH_LINE *line = dynamic_cast<SCH_LINE*>( p );
if( !line )
{
wxFAIL_MSG( "RemoveBacktracks() requires SCH_LINE items" );
break;
}
p = line->Next();
if( last_line )
{
wxASSERT_MSG( last_line->GetEndPoint() == line->GetStartPoint(),
"RemoveBacktracks() requires contiguous lines" );
if( IsPointOnSegment( last_line->GetStartPoint(), line->GetStartPoint(),
line->GetEndPoint() ) )
{
last_line->SetEndPoint( line->GetEndPoint() );
delete s_wires.Remove( line );
}
else
last_line = line;
}
else
last_line = line;
}
}
void SCH_EDIT_FRAME::CheckListConnections( PICKED_ITEMS_LIST& aItemsList, bool aAppend )
{
std::vector< wxPoint > pts;
std::vector< wxPoint > connections;
GetSchematicConnections( connections );
for( unsigned ii = 0; ii < aItemsList.GetCount(); ii++ )
{
SCH_ITEM* item = (SCH_ITEM*) aItemsList.GetPickedItem( ii );
std::vector< wxPoint > new_pts;
if( !item->IsConnectable() )
continue;
item->GetConnectionPoints( new_pts );
pts.insert( pts.end(), new_pts.begin(), new_pts.end() );
// If the item is a line, we also add any connection points from the rest of the schematic
// that terminate on the line after it is moved.
if( item->Type() == SCH_LINE_T )
{
SCH_LINE* line = (SCH_LINE*) item;
for( auto i : connections )
if( IsPointOnSegment( line->GetStartPoint(), line->GetEndPoint(), i ) )
pts.push_back( i );
}
else
{
// Clean up any wires that short non-wire connections in the list
for( auto point = new_pts.begin(); point != new_pts.end(); point++ )
{
for( auto second_point = point + 1; second_point != new_pts.end(); second_point++ )
{
aAppend |= TrimWire( *point, *second_point, aAppend );
}
}
}
}
// We always have some overlapping connection points. Drop duplicates here
std::sort( pts.begin(), pts.end(),
[]( const wxPoint& a, const wxPoint& b ) -> bool
{ return a.x < b.x || (a.x == b.x && a.y < b.y); } );
pts.erase( unique( pts.begin(), pts.end() ), pts.end() );
for( auto point : pts )
{
if( GetScreen()->IsJunctionNeeded( point, true ) )
{
AddJunction( point, aAppend );
aAppend = true;
}
}
}
void SCH_SCREEN::MarkConnections( SCH_LINE* aSegment )
{
wxCHECK_RET( (aSegment) && (aSegment->Type() == SCH_LINE_T),
wxT( "Invalid object pointer." ) );
for( SCH_ITEM* item = m_drawList.begin(); item; item = item->Next() )
{
if( item->GetFlags() & CANDIDATE )
continue;
if( item->Type() == SCH_JUNCTION_T )
{
SCH_JUNCTION* junction = (SCH_JUNCTION*) item;
if( aSegment->IsEndPoint( junction->GetPosition() ) )
item->SetFlags( CANDIDATE );
continue;
}
if( item->Type() != SCH_LINE_T )
continue;
SCH_LINE* segment = (SCH_LINE*) item;
if( aSegment->IsEndPoint( segment->GetStartPoint() )
&& !GetPin( segment->GetStartPoint(), NULL, true ) )
{
item->SetFlags( CANDIDATE );
MarkConnections( segment );
}
if( aSegment->IsEndPoint( segment->GetEndPoint() )
&& !GetPin( segment->GetEndPoint(), NULL, true ) )
{
item->SetFlags( CANDIDATE );
MarkConnections( segment );
}
}
}
/**
* In a contiguous list of wires, remove wires that backtrack over the previous
* wire. Example:
*
* Wire is added:
* ---------------------------------------->
*
* A second wire backtracks over it:
* -------------------<====================>
*
* RemoveBacktracks is called:
* ------------------->
*/
static void RemoveBacktracks( DLIST<SCH_ITEM>& aWires )
{
EDA_ITEM* first = aWires.GetFirst();
std::vector<SCH_LINE*> last_lines;
for( EDA_ITEM* p = first; p; )
{
SCH_LINE *line = static_cast<SCH_LINE*>( p );
p = line->Next();
if( !last_lines.empty() )
{
SCH_LINE* last_line = last_lines[last_lines.size() - 1];
bool contiguous = ( last_line->GetEndPoint() == line->GetStartPoint() );
bool backtracks = IsPointOnSegment( last_line->GetStartPoint(),
last_line->GetEndPoint(), line->GetEndPoint() );
bool total_backtrack = ( last_line->GetStartPoint() == line->GetEndPoint() );
if( contiguous && backtracks )
{
if( total_backtrack )
{
delete s_wires.Remove( last_line );
delete s_wires.Remove( line );
last_lines.pop_back();
}
else
{
last_line->SetEndPoint( line->GetEndPoint() );
delete s_wires.Remove( line );
}
}
else
{
last_lines.push_back( line );
}
}
else
{
last_lines.push_back( line );
}
}
}
void SCH_SCREEN::addConnectedItemsToBlock( const wxPoint& position )
{
SCH_ITEM* item;
ITEM_PICKER picker;
bool addinlist = true;
for( item = m_drawList.begin(); item; item = item->Next() )
{
picker.SetItem( item );
if( !item->IsConnectable() || !item->IsConnected( position )
|| (item->GetFlags() & SKIP_STRUCT) )
continue;
if( item->IsSelected() && item->Type() != SCH_LINE_T )
continue;
// A line having 2 ends, it can be tested twice: one time per end
if( item->Type() == SCH_LINE_T )
{
if( ! item->IsSelected() ) // First time this line is tested
item->SetFlags( SELECTED | STARTPOINT | ENDPOINT );
else // second time (or more) this line is tested
addinlist = false;
SCH_LINE* line = (SCH_LINE*) item;
if( line->GetStartPoint() == position )
item->ClearFlags( STARTPOINT );
else if( line->GetEndPoint() == position )
item->ClearFlags( ENDPOINT );
}
else
item->SetFlags( SELECTED );
if( addinlist )
{
picker.SetFlags( item->GetFlags() );
m_BlockLocate.GetItems().PushItem( picker );
}
}
}
void SCH_EDIT_FRAME::EndSegment( wxDC* DC )
{
SCH_SCREEN* screen = GetScreen();
SCH_LINE* segment = (SCH_LINE*) screen->GetCurItem();
if( segment == NULL || segment->Type() != SCH_LINE_T || !segment->IsNew() )
return;
// Delete zero length segments and clear item flags.
SCH_ITEM* item = s_wires.begin();
while( item )
{
item->ClearFlags();
wxCHECK_RET( item->Type() == SCH_LINE_T, wxT( "Unexpected object type in wire list." ) );
segment = (SCH_LINE*) item;
item = item->Next();
if( segment->IsNull() )
delete s_wires.Remove( segment );
}
if( s_wires.GetCount() == 0 )
return;
// Get the last non-null wire (this is the last created segment).
SetRepeatItem( segment = (SCH_LINE*) s_wires.GetLast() );
screen->SetCurItem( NULL );
m_canvas->EndMouseCapture( -1, -1, wxEmptyString, false );
// store the terminal point of this last segment: a junction could be needed
// (the last wire could be merged/deleted/modified, and lost)
wxPoint endpoint = segment->GetEndPoint();
// store the starting point of this first segment: a junction could be needed
SCH_LINE* firstsegment = (SCH_LINE*) s_wires.GetFirst();
wxPoint startPoint = firstsegment->GetStartPoint();
// Save the old wires for the undo command
DLIST< SCH_ITEM > oldWires; // stores here the old wires
GetScreen()->ExtractWires( oldWires, true ); // Save them in oldWires list
// Put the snap shot of the previous wire, buses, and junctions in the undo/redo list.
PICKED_ITEMS_LIST oldItems;
oldItems.m_Status = UR_WIRE_IMAGE;
while( oldWires.GetCount() != 0 )
{
ITEM_PICKER picker = ITEM_PICKER( oldWires.PopFront(), UR_WIRE_IMAGE );
oldItems.PushItem( picker );
}
SaveCopyInUndoList( oldItems, UR_WIRE_IMAGE );
// Remove segments backtracking over others
RemoveBacktracks( s_wires );
// Add the new wires
screen->Append( s_wires );
// Correct and remove segments that need to be merged.
screen->SchematicCleanUp();
// A junction could be needed to connect the end point of the last created segment.
if( screen->IsJunctionNeeded( endpoint ) )
screen->Append( AddJunction( DC, endpoint ) );
// A junction could be needed to connect the start point of the set of new created wires
if( screen->IsJunctionNeeded( startPoint ) )
screen->Append( AddJunction( DC, startPoint ) );
m_canvas->Refresh();
OnModify();
}
int SCH_SCREEN::GetConnection( const wxPoint& aPosition, PICKED_ITEMS_LIST& aList,
bool aFullConnection )
{
SCH_ITEM* item;
EDA_ITEM* tmp;
EDA_ITEMS list;
// Clear flags member for all items.
ClearDrawingState();
BreakSegmentsOnJunctions();
if( GetNode( aPosition, list ) == 0 )
return 0;
for( size_t i = 0; i < list.size(); i++ )
{
item = (SCH_ITEM*) list[ i ];
item->SetFlags( SELECTEDNODE | STRUCT_DELETED );
/* Put this structure in the picked list: */
ITEM_PICKER picker( item, UR_DELETED );
aList.PushItem( picker );
}
// Mark all wires, junctions, .. connected to the item(s) found.
if( aFullConnection )
{
SCH_LINE* segment;
for( item = m_drawList.begin(); item; item = item->Next() )
{
if( !(item->GetFlags() & SELECTEDNODE) )
continue;
if( item->Type() != SCH_LINE_T )
continue;
MarkConnections( (SCH_LINE*) item );
}
// Search all attached wires (i.e wire with one new dangling end )
for( item = m_drawList.begin(); item; item = item->Next() )
{
bool noconnect = false;
if( item->GetFlags() & STRUCT_DELETED )
continue; // Already seen
if( !(item->GetFlags() & CANDIDATE) )
continue; // not a candidate
if( item->Type() != SCH_LINE_T )
continue;
item->SetFlags( SKIP_STRUCT );
segment = (SCH_LINE*) item;
/* If the wire start point is connected to a wire that was already found
* and now is not connected, add the wire to the list. */
for( tmp = m_drawList.begin(); tmp; tmp = tmp->Next() )
{
// Ensure tmp is a previously deleted segment:
if( ( tmp->GetFlags() & STRUCT_DELETED ) == 0 )
continue;
if( tmp->Type() != SCH_LINE_T )
continue;
SCH_LINE* testSegment = (SCH_LINE*) tmp;
// Test for segment connected to the previously deleted segment:
if( testSegment->IsEndPoint( segment->GetStartPoint() ) )
break;
}
// when tmp != NULL, segment is a new candidate:
// put it in deleted list if
// the start point is not connected to an other item (like pin)
if( tmp && !CountConnectedItems( segment->GetStartPoint(), true ) )
noconnect = true;
/* If the wire end point is connected to a wire that has already been found
* and now is not connected, add the wire to the list. */
for( tmp = m_drawList.begin(); tmp; tmp = tmp->Next() )
{
// Ensure tmp is a previously deleted segment:
if( ( tmp->GetFlags() & STRUCT_DELETED ) == 0 )
continue;
if( tmp->Type() != SCH_LINE_T )
continue;
SCH_LINE* testSegment = (SCH_LINE*) tmp;
// Test for segment connected to the previously deleted segment:
if( testSegment->IsEndPoint( segment->GetEndPoint() ) )
break;
}
// when tmp != NULL, segment is a new candidate:
// put it in deleted list if
// the end point is not connected to an other item (like pin)
if( tmp && !CountConnectedItems( segment->GetEndPoint(), true ) )
noconnect = true;
item->ClearFlags( SKIP_STRUCT );
if( noconnect )
{
item->SetFlags( STRUCT_DELETED );
ITEM_PICKER picker( item, UR_DELETED );
aList.PushItem( picker );
item = m_drawList.begin();
}
}
// Get redundant junctions (junctions which connect < 3 end wires
// and no pin)
for( item = m_drawList.begin(); item; item = item->Next() )
{
if( item->GetFlags() & STRUCT_DELETED )
continue;
if( !(item->GetFlags() & CANDIDATE) )
continue;
if( item->Type() != SCH_JUNCTION_T )
continue;
SCH_JUNCTION* junction = (SCH_JUNCTION*) item;
if( CountConnectedItems( junction->GetPosition(), false ) <= 2 )
{
item->SetFlags( STRUCT_DELETED );
ITEM_PICKER picker( item, UR_DELETED );
aList.PushItem( picker );
}
}
for( item = m_drawList.begin(); item; item = item->Next() )
{
if( item->GetFlags() & STRUCT_DELETED )
continue;
if( item->Type() != SCH_LABEL_T )
continue;
tmp = GetWireOrBus( ( (SCH_TEXT*) item )->GetPosition() );
if( tmp && tmp->GetFlags() & STRUCT_DELETED )
{
item->SetFlags( STRUCT_DELETED );
ITEM_PICKER picker( item, UR_DELETED );
aList.PushItem( picker );
}
}
}
ClearDrawingState();
return aList.GetCount();
}
void SCH_SCREEN::addConnectedItemsToBlock( const SCH_ITEM* aItem, const wxPoint& position )
{
SCH_ITEM* item;
ITEM_PICKER picker;
for( item = m_drawList.begin(); item; item = item->Next() )
{
if( !item->IsConnectable() || ( item->GetFlags() & SKIP_STRUCT )
|| !item->CanConnect( aItem ) || item == aItem )
continue;
// A line having 2 ends, it can be tested twice: one time per end
if( item->Type() == SCH_LINE_T )
{
SCH_LINE* line = (SCH_LINE*) item;
if( !item->HitTest( position ) )
continue;
// First time through. Flags set to denote an end that is not moving
if( !item->IsSelected() )
item->SetFlags( CANDIDATE | STARTPOINT | ENDPOINT );
if( line->GetStartPoint() == position )
item->ClearFlags( STARTPOINT );
else if( line->GetEndPoint() == position )
item->ClearFlags( ENDPOINT );
else
// This picks up items such as labels that can connect to the middle of a line
item->ClearFlags( STARTPOINT | ENDPOINT );
}
// We want to move a mid-connected label or bus entry when the full line is being moved
else if( !item->IsSelected()
&& aItem->Type() == SCH_LINE_T
&& !( aItem->GetFlags() & ( ENDPOINT | STARTPOINT ) ) )
{
std::vector< wxPoint > connections;
item->GetConnectionPoints( connections );
for( auto conn : connections )
{
if( aItem->HitTest( conn ) )
{
item->SetFlags( CANDIDATE );
break;
}
}
}
if( item->IsSelected() )
continue;
if( ( item->GetFlags() & CANDIDATE ) || item->IsConnected( position ) ) // Deal with all non-line items
{
item->ClearFlags( CANDIDATE );
item->SetFlags( SELECTED );
picker.SetItem( item );
picker.SetFlags( item->GetFlags() );
m_BlockLocate.GetItems().PushItem( picker );
}
}
}
