void MacroCommandDialog::PopulateOrExchange(ShuttleGui &S)
{
S.StartVerticalLay(true);
{
S.StartMultiColumn(4, wxEXPAND);
{
S.SetStretchyCol(1);
mCommand = S.AddTextBox(_("&Command"), wxT(""), 20);
mCommand->SetEditable(false);
mEditParams = S.Id(EditParamsButtonID).AddButton(_("&Edit Parameters"));
mEditParams->Enable(false); // disable button as box is empty
mUsePreset = S.Id(UsePresetButtonID).AddButton(_("&Use Preset"));
mUsePreset->Enable(false); // disable button as box is empty
}
S.EndMultiColumn();
S.StartMultiColumn(2, wxEXPAND);
{
S.SetStretchyCol(1);
mParameters = S.AddTextBox(_("&Parameters"), wxT(""), 0);
mParameters->SetEditable(false);
wxString prompt{_("&Details")};
S.Prop(0).AddPrompt(prompt);
mDetails = S.AddTextWindow( wxT(""));
mDetails->SetEditable(false);
mDetails->SetName(wxStripMenuCodes(prompt));
}
S.EndMultiColumn();
S.Prop(10).StartStatic(_("Choose command"), true);
{
S.SetStyle(wxSUNKEN_BORDER | wxLC_LIST | wxLC_SINGLE_SEL);
mChoices = S.Id(CommandsListID).AddListControl();
}
S.EndStatic();
}
S.EndVerticalLay();
S.AddStandardButtons( eOkButton | eCancelButton | eHelpButton);
PopulateCommandList();
if (mChoices->GetItemCount() > 0) {
// set first item to be selected (and the focus when the
// list first becomes the focus)
mChoices->SetItemState(0, wxLIST_STATE_FOCUSED | wxLIST_STATE_SELECTED,
wxLIST_STATE_FOCUSED | wxLIST_STATE_SELECTED);
}
SetMinSize(wxSize(780, 560));
Fit();
Center();
}
void SplashDialog::Populate( ShuttleGui & S )
{
this->SetBackgroundColour(theTheme.Colour( clrAboutBoxBackground ));
bool bShow;
gPrefs->Read(wxT("/GUI/ShowSplashScreen"), &bShow, true );
S.StartVerticalLay(1);
//v For now, change to AudacityLogoWithName via old-fashioned ways, not Theme.
m_pLogo = new wxBitmap((const char **) AudacityLogoWithName_xpm); //v
// JKC: Resize to 50% of size. Later we may use a smaller xpm as
// our source, but this allows us to tweak the size - if we want to.
// It also makes it easier to revert to full size if we decide to.
const float fScale=0.5f;// smaller size.
wxImage RescaledImage( m_pLogo->ConvertToImage() );
// wxIMAGE_QUALITY_HIGH not supported by wxWidgets 2.6.1, or we would use it here.
RescaledImage.Rescale( int(LOGOWITHNAME_WIDTH * fScale), int(LOGOWITHNAME_HEIGHT *fScale) );
wxBitmap RescaledBitmap( RescaledImage );
m_pIcon =
new wxStaticBitmap(S.GetParent(), -1,
//*m_pLogo, //v theTheme.Bitmap(bmpAudacityLogoWithName),
RescaledBitmap,
wxDefaultPosition,
wxSize(int(LOGOWITHNAME_WIDTH*fScale), int(LOGOWITHNAME_HEIGHT*fScale)));
S.Prop(0).AddWindow( m_pIcon );
mpHtml = new LinkingHtmlWindow(S.GetParent(), -1,
wxDefaultPosition,
wxSize(506, 280),
wxHW_SCROLLBAR_AUTO | wxSUNKEN_BORDER );
mpHtml->SetPage(HelpText( wxT("welcome") ));
S.Prop(1).AddWindow( mpHtml, wxEXPAND );
S.Prop(0).StartMultiColumn(2, wxEXPAND);
S.SetStretchyCol( 1 );// Column 1 is stretchy...
{
S.SetBorder( 5 );
S.Id( DontShowID).AddCheckBox( _("Don't show this again at start up"), bShow ? wxT("false") : wxT("true") );
wxButton *ok = new wxButton(S.GetParent(), wxID_OK);
ok->SetDefault();
S.SetBorder( 5 );
S.Prop(0).AddWindow( ok, wxALIGN_RIGHT| wxALL );
}
S.EndVerticalLay();
}
void ExportOGGOptions::PopulateOrExchange(ShuttleGui & S)
{
S.StartVerticalLay();
{
S.StartHorizontalLay(wxEXPAND);
{
S.SetSizerProportion(1);
S.StartMultiColumn(2, wxCENTER);
{
S.SetStretchyCol(1);
S.Prop(1).TieSlider(_("Quality:"), mOggQualityUnscaled, 10);
}
S.EndMultiColumn();
}
S.EndHorizontalLay();
}
S.EndVerticalLay();
}
void TagsEditor::PopulateOrExchange(ShuttleGui & S)
{
bool bShow;
gPrefs->Read(wxT("/AudioFiles/ShowId3Dialog"), &bShow, true );
S.StartVerticalLay();
{
S.StartHorizontalLay(wxALIGN_LEFT, 0);
{
S.AddUnits(_("Use arrow keys (or ENTER key after editing) to navigate fields."));
}
S.EndHorizontalLay();
if (mGrid == NULL) {
mGrid = safenew Grid(S.GetParent(),
wxID_ANY,
wxDefaultPosition,
wxDefaultSize,
wxSUNKEN_BORDER);
mGrid->RegisterDataType(wxT("Combo"),
(mStringRenderer = safenew wxGridCellStringRenderer),
(mComboEditor = safenew ComboEditor(wxArrayString(), true)));
mGrid->SetColLabelSize(mGrid->GetDefaultRowSize());
auto cs = names();
// Build the initial (empty) grid
mGrid->CreateGrid(0, 2);
mGrid->SetRowLabelSize(0);
mGrid->SetDefaultCellAlignment(wxALIGN_LEFT, wxALIGN_CENTER);
mGrid->SetColLabelValue(0, _("Tag"));
mGrid->SetColLabelValue(1, _("Value"));
// Resize the name column and set default row height.
wxComboBox tc(this, wxID_ANY, wxT(""), wxDefaultPosition, wxDefaultSize, cs);
mGrid->SetColSize(0, tc.GetSize().x);
mGrid->SetColMinimalWidth(0, tc.GetSize().x);
}
S.Prop(1);
S.AddWindow(mGrid, wxEXPAND | wxALL);
S.StartMultiColumn(4, wxALIGN_CENTER);
{
S.Id(AddID).AddButton(_("&Add"));
S.Id(RemoveID).AddButton(_("&Remove"));
S.AddTitle( {} );
S.Id(ClearID).AddButton(_("Cl&ear"));
}
S.EndMultiColumn();
S.StartHorizontalLay(wxALIGN_CENTRE, 0);
{
S.StartStatic(_("Genres"));
{
S.StartMultiColumn(4, wxALIGN_CENTER);
{
S.Id(EditID).AddButton(_("E&dit..."));
S.Id(ResetID).AddButton(_("Rese&t..."));
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Template"));
{
S.StartMultiColumn(4, wxALIGN_CENTER);
{
S.Id(LoadID).AddButton(_("&Load..."));
S.Id(SaveID).AddButton(_("&Save..."));
S.AddTitle( {} );
S.Id(SaveDefaultsID).AddButton(_("Set De&fault"));
}
S.EndMultiColumn();
}
S.EndStatic();
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxALIGN_LEFT, 0);
{
S.Id( DontShowID ).AddCheckBox( _("Don't show this when exporting audio"), !bShow );
}
S.EndHorizontalLay();
}
S.EndVerticalLay();
S.AddStandardButtons(eOkButton | eCancelButton | eHelpButton);
}
void TagsEditor::PopulateOrExchange(ShuttleGui & S)
{
S.StartVerticalLay();
{
S.StartHorizontalLay(wxALIGN_LEFT, false);
{
S.AddUnits(_("Use arrow keys (or RETURN key after editing) to navigate fields."));
}
S.EndHorizontalLay();
if (mGrid == NULL) {
mGrid = new Grid(S.GetParent(),
wxID_ANY,
wxDefaultPosition,
wxDefaultSize,
wxSUNKEN_BORDER);
mStringRenderer = new wxGridCellStringRenderer;
mComboEditor = new ComboEditor(wxArrayString(), true);
mGrid->RegisterDataType(wxT("Combo"), mStringRenderer, mComboEditor);
mGrid->SetColLabelSize(mGrid->GetDefaultRowSize());
wxArrayString cs(WXSIZEOF(names), names);
// Build the initial (empty) grid
mGrid->CreateGrid(0, 2);
mGrid->SetRowLabelSize(0);
mGrid->SetDefaultCellAlignment(wxALIGN_LEFT, wxALIGN_CENTER);
mGrid->SetColLabelValue(0, _("Tag"));
mGrid->SetColLabelValue(1, _("Value"));
// Resize the name column and set default row height.
wxComboBox tc(this, wxID_ANY, wxT(""), wxDefaultPosition, wxDefaultSize, cs);
mGrid->SetColSize(0, tc.GetSize().x);
mGrid->SetColMinimalWidth(0, tc.GetSize().x);
}
S.Prop(true);
S.AddWindow(mGrid, wxEXPAND | wxALL);
S.StartMultiColumn(4, wxALIGN_CENTER);
{
S.Id(AddID).AddButton(_("&Add"));
S.Id(RemoveID).AddButton(_("&Remove"));
S.AddTitle(wxT(" "));
S.Id(ClearID).AddButton(_("Cl&ear"));
}
S.EndMultiColumn();
S.StartHorizontalLay(wxALIGN_CENTRE, false);
{
S.StartStatic(_("Genres"));
{
S.StartMultiColumn(4, wxALIGN_CENTER);
{
S.Id(EditID).AddButton(_("E&dit..."));
S.Id(ResetID).AddButton(_("Rese&t..."));
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Template"));
{
S.StartMultiColumn(4, wxALIGN_CENTER);
{
S.Id(LoadID).AddButton(_("&Load..."));
S.Id(SaveID).AddButton(_("&Save..."));
S.AddTitle(wxT(" "));
S.Id(SaveDefaultsID).AddButton(_("Set De&fault"));
}
S.EndMultiColumn();
}
S.EndStatic();
}
S.EndHorizontalLay();
}
S.EndVerticalLay();
S.AddStandardButtons(eOkButton | eCancelButton);
}
void SplashDialog::Populate( ShuttleGui & S )
{
//#if ((AUDACITY_BRANDING == BRAND_JAMLING__EASY) || (AUDACITY_BRANDING == BRAND_JAMLING__FULL))
// this->SetBackgroundColour(wxColour(rrr, ggg, bbb)); // same as waveform color
//#else
// this->SetBackgroundColour(theTheme.Colour( clrAboutBoxBackground ));
//#endif
this->SetBackgroundColour(theTheme.Colour( clrAboutBoxBackground ));
bool bShow;
gPrefs->Read(wxT("/GUI/ShowSplashScreen"), &bShow, true );
S.StartVerticalLay(1);
wxImage buttonImageUp;
wxImage buttonImageOver;
wxSize buttonSize;
wxBitmap* pButtonBitmap;
wxBitmap* pButtonBitmapOver;
//vvv Change this compile flag when other brands are supported.
#if ((AUDACITY_BRANDING == BRAND_JAMLING__EASY) || (AUDACITY_BRANDING == BRAND_JAMLING__FULL))
//vvv Compiles only BRAND_JAMLING__EASY or BRAND_JAMLING__FULL
// because we don't load any other company_logo*_xpm consts yet.
pButtonBitmap = new wxBitmap(company_logo_xpm);
buttonImageUp = pButtonBitmap->ConvertToImage();
pButtonBitmapOver = new wxBitmap(company_logo_over_xpm);
buttonImageOver = pButtonBitmapOver->ConvertToImage();
buttonSize = wxSize(pButtonBitmap->GetWidth(), pButtonBitmap->GetHeight());
mButton_Logo =
new AButton(this, ID_BUTTON_LOGO,
wxDefaultPosition, buttonSize,
&buttonImageUp, &buttonImageOver,
&buttonImageUp, &buttonImageUp, //v other images?
true);
#else
//vvv For now, change to AudacityLogoWithName via old-fashioned ways, not Theme.
pButtonBitmap = //vvv theTheme.Bitmap(bmpAudacityLogoWithName)
new wxBitmap((const char **) AudacityLogoWithName_xpm);
buttonImageUp = pButtonBitmap->ConvertToImage();
// JKC: Resize to 50% of size. Later we may use a smaller xpm as
// our source, but this allows us to tweak the size - if we want to.
// It also makes it easier to revert to full size if we decide to.
const float fScale=0.5f;// smaller size.
buttonSize = wxSize(LOGOWITHNAME_WIDTH * fScale, LOGOWITHNAME_HEIGHT * fScale);
// wxIMAGE_QUALITY_HIGH not supported by wxWidgets 2.6.x, or we would use it here.
buttonImageUp.Rescale(buttonSize.GetWidth(), buttonSize.GetHeight());
buttonImageOver = buttonImageUp.Copy();
buttonImageOver.RotateHue(-0.01);
mButton_Logo =
new AButton(this, ID_BUTTON_LOGO,
wxDefaultPosition, buttonSize,
&buttonImageUp, &buttonImageOver,
&buttonImageUp, &buttonImageUp, //v other images?
true);
#endif
S.Prop(0).AddWindow(mButton_Logo);
mpHtml = new LinkingHtmlWindow(S.GetParent(), -1,
wxDefaultPosition,
wxSize(kWidth, 280),
wxHW_SCROLLBAR_AUTO | wxSUNKEN_BORDER );
mpHtml->SetPage(HelpText( wxT("welcome") ));
S.Prop(1).AddWindow( mpHtml, wxEXPAND );
S.Prop(0).StartMultiColumn(2, wxEXPAND);
S.SetStretchyCol( 1 );// Column 1 is stretchy...
{
S.SetBorder( 5 );
S.Id( DontShowID).AddCheckBox( _("Don't show this again at start up"), bShow ? wxT("false") : wxT("true") );
wxButton *ok = new wxButton(S.GetParent(), wxID_OK);
ok->SetDefault();
ok->SetFocus();
S.SetBorder( 5 );
S.Prop(0).AddWindow( ok, wxALIGN_RIGHT| wxALL );
}
S.EndVerticalLay();
}
void EffectCompressor::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(5);
S.StartHorizontalLay(wxEXPAND, true);
{
S.SetBorder(10);
mPanel = safenew EffectCompressorPanel(S.GetParent(),
mThresholdDB,
mNoiseFloorDB,
mRatio);
mPanel->SetMinSize(wxSize(400, 200));
S.Prop(true).AddWindow(mPanel, wxEXPAND | wxALL);
S.SetBorder(5);
}
S.EndHorizontalLay();
S.StartStatic(wxT(""));
{
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol(1);
mThresholdLabel = S.AddVariableText(_("Threshold:"), true,
wxALIGN_RIGHT | wxALIGN_CENTER_VERTICAL);
S.SetStyle(wxSL_HORIZONTAL);
mThresholdSlider = S.Id(ID_Threshold).AddSlider(wxT(""),
DEF_Threshold * SCL_Threshold,
MAX_Threshold * SCL_Threshold,
MIN_Threshold * SCL_Threshold);
mThresholdSlider->SetName(_("Threshold"));
mThresholdText = S.AddVariableText(wxT("XXX dB"), true,
wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL);
mNoiseFloorLabel = S.AddVariableText(_("Noise Floor:"), true,
wxALIGN_RIGHT | wxALIGN_CENTER_VERTICAL);
S.SetStyle(wxSL_HORIZONTAL);
mNoiseFloorSlider = S.Id(ID_NoiseFloor).AddSlider(wxT(""),
DEF_NoiseFloor / SCL_NoiseFloor,
MAX_NoiseFloor / SCL_NoiseFloor,
MIN_NoiseFloor / SCL_NoiseFloor);
mNoiseFloorSlider->SetName(_("Noise Floor"));
mNoiseFloorText = S.AddVariableText(wxT("XXX dB"), true,
wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL);
mRatioLabel = S.AddVariableText(_("Ratio:"), true,
wxALIGN_RIGHT | wxALIGN_CENTER_VERTICAL);
S.SetStyle(wxSL_HORIZONTAL);
mRatioSlider = S.Id(ID_Ratio).AddSlider(wxT(""),
DEF_Ratio * SCL_Ratio,
MAX_Ratio * SCL_Ratio,
MIN_Ratio * SCL_Ratio);
mRatioSlider->SetName(_("Ratio"));
mRatioSlider->SetPageSize(5);
mRatioText = S.AddVariableText(wxT("XXXX:1"), true,
wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL);
/* i18n-hint: Particularly in percussion, sounds can be regarded as having
* an 'attack' phase where the sound builds up and a 'decay' where the
* sound dies away. So this means 'onset duration'. */
mAttackLabel = S.AddVariableText(_("Attack Time:"), true,
wxALIGN_RIGHT | wxALIGN_CENTER_VERTICAL);
S.SetStyle(wxSL_HORIZONTAL);
mAttackSlider = S.Id(ID_Attack).AddSlider(wxT(""),
DEF_AttackTime * SCL_AttackTime,
MAX_AttackTime * SCL_AttackTime,
MIN_AttackTime * SCL_AttackTime);
mAttackSlider->SetName(_("Attack Time"));
mAttackText = S.AddVariableText(wxT("XXXX secs"), true,
wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL);
mDecayLabel = S.AddVariableText(_("Release Time:"), true,
wxALIGN_RIGHT | wxALIGN_CENTER_VERTICAL);
S.SetStyle(wxSL_HORIZONTAL);
mDecaySlider = S.Id(ID_Decay).AddSlider(wxT(""),
DEF_ReleaseTime * SCL_ReleaseTime,
MAX_ReleaseTime * SCL_ReleaseTime,
MIN_ReleaseTime * SCL_ReleaseTime);
mDecaySlider->SetName(_("Release Time"));
mDecayText = S.AddVariableText(wxT("XXXX secs"), true,
wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL);
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartHorizontalLay(wxCENTER, false);
{
/* i18n-hint: Make-up, i.e. correct for any reduction, rather than fabricate it.*/
mGainCheckBox = S.AddCheckBox(_("Make-up gain for 0 dB after compressing"),
DEF_Normalize ? wxT("true") : wxT("false"));
mPeakCheckBox = S.AddCheckBox(_("Compress based on Peaks"),
DEF_UsePeak ? wxT("true") : wxT("false"));
}
S.EndHorizontalLay();
}
/// Normally in classes derived from PrefsPanel this function
/// is used both to populate the panel and to exchange data with it.
/// With KeyConfigPrefs all the exchanges are handled specially,
/// so this is only used in populating the panel.
void KeyConfigPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("Key Bindings"), 1);
{
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol(1);
S.StartHorizontalLay(wxALIGN_LEFT|wxALIGN_CENTER_VERTICAL, 0);
{
S.AddTitle(_("View by:"));
S.StartRadioButtonGroup(wxT("/Prefs/KeyConfig/ViewBy"), wxT("tree"));
{
mViewByTree = S.Id(ViewByTreeID).TieRadioButton(_("&Tree"), wxT("tree"));
mViewByTree->SetName(_("View by tree"));
mViewByName = S.Id(ViewByNameID).TieRadioButton(_("&Name"), wxT("name"));
mViewByName->SetName(_("View by name"));
mViewByKey = S.Id(ViewByKeyID).TieRadioButton(_("&Key"), wxT("key"));
mViewByKey->SetName(_("View by key"));
}
S.EndRadioButtonGroup();
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxALIGN_CENTER|wxALIGN_CENTER_VERTICAL, 0);
{
// just a spacer
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxALIGN_RIGHT|wxALIGN_CENTER_VERTICAL, 0);
{
mFilterLabel = S.AddVariableText(_("Searc&h:"));
if (!mFilter) {
mFilter = safenew wxTextCtrl(this,
FilterID,
wxT(""),
wxDefaultPosition,
#if defined(__WXMAC__)
wxSize(300, -1),
#else
wxSize(210, -1),
#endif
wxTE_PROCESS_ENTER);
mFilter->SetName(wxStripMenuCodes(mFilterLabel->GetLabel()));
mFilter->Connect(wxEVT_KEY_DOWN,
wxKeyEventHandler(KeyConfigPrefs::OnFilterKeyDown),
NULL,
this);
mFilter->Connect(wxEVT_CHAR,
wxKeyEventHandler(KeyConfigPrefs::OnFilterChar),
NULL,
this);
}
S.AddWindow(mFilter, wxALIGN_NOT | wxALIGN_LEFT);
}
S.EndHorizontalLay();
}
S.EndThreeColumn();
S.AddSpace(-1, 2);
S.StartHorizontalLay(wxEXPAND, 1);
{
if (!mView) {
mView = safenew KeyView(this, CommandsListID);
mView->SetName(_("Bindings"));
}
S.Prop(true);
S.AddWindow(mView, wxEXPAND);
}
S.EndHorizontalLay();
S.StartThreeColumn();
{
if (!mKey) {
mKey = safenew wxTextCtrl(this,
CurrentComboID,
wxT(""),
wxDefaultPosition,
#if defined(__WXMAC__)
wxSize(300, -1),
#else
wxSize(210, -1),
#endif
wxTE_PROCESS_ENTER);
mKey->SetName(_("Short cut"));
mKey->Connect(wxEVT_KEY_DOWN,
wxKeyEventHandler(KeyConfigPrefs::OnHotkeyKeyDown),
NULL,
this);
mKey->Connect(wxEVT_CHAR,
wxKeyEventHandler(KeyConfigPrefs::OnHotkeyChar),
NULL,
this);
mKey->Connect(wxEVT_KILL_FOCUS,
wxFocusEventHandler(KeyConfigPrefs::OnHotkeyKillFocus),
NULL,
this);
}
S.AddWindow(mKey);
/* i18n-hint: (verb)*/
mSet = S.Id(SetButtonID).AddButton(_("&Set"));
mClear = S.Id(ClearButtonID).AddButton(_("Cl&ear"));
}
S.EndThreeColumn();
#if defined(__WXMAC__)
S.AddFixedText(_("Note: Pressing Cmd+Q will quit. All other keys are valid."));
#endif
S.StartThreeColumn();
{
S.Id(ImportButtonID).AddButton(_("&Import..."));
S.Id(ExportButtonID).AddButton(_("&Export..."));
S.Id(AssignDefaultsButtonID).AddButton(_("&Defaults"));
}
S.EndThreeColumn();
}
S.EndStatic();
// Need to layout so that the KeyView is properly sized before populating.
// Otherwise, the initial selection is not scrolled into view.
Layout();
}
void EffectScienFilter::PopulateOrExchange(ShuttleGui & S)
{
wxWindow *parent = S.GetParent();
S.AddSpace(5);
S.SetSizerProportion(1);
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol(1);
S.SetStretchyRow(0);
// -------------------------------------------------------------------
// ROW 1: Freq response panel and sliders for vertical scale
// -------------------------------------------------------------------
S.StartVerticalLay();
{
mdBRuler = new RulerPanel(parent, wxID_ANY);
mdBRuler->ruler.SetBounds(0, 0, 100, 100); // Ruler can't handle small sizes
mdBRuler->ruler.SetOrientation(wxVERTICAL);
mdBRuler->ruler.SetRange(30.0, -120.0);
mdBRuler->ruler.SetFormat(Ruler::LinearDBFormat);
mdBRuler->ruler.SetUnits(_("dB"));
mdBRuler->ruler.SetLabelEdges(true);
int w;
mdBRuler->ruler.GetMaxSize(&w, NULL);
mdBRuler->SetSize(wxSize(w, 150)); // height needed for wxGTK
S.SetBorder(1);
S.AddSpace(1, 1);
S.Prop(1);
S.AddWindow(mdBRuler, wxALIGN_RIGHT | wxTOP);
S.AddSpace(1, 1);
}
S.EndVerticalLay();
mPanel = new EffectScienFilterPanel(this, parent);
mPanel->SetFreqRange(mLoFreq, mNyquist);
S.SetBorder(5);
S.Prop(1);
S.AddWindow(mPanel, wxEXPAND | wxRIGHT);
S.SetSizeHints(-1, -1);
S.StartVerticalLay();
{
S.AddVariableText(_("+ dB"), false, wxCENTER);
S.SetStyle(wxSL_VERTICAL | wxSL_INVERSE);
mdBMaxSlider = S.Id(ID_dBMax).AddSlider(wxT(""), 10, 20, 0);
#if wxUSE_ACCESSIBILITY
mdBMaxSlider->SetName(_("Max dB"));
mdBMaxSlider->SetAccessible(new SliderAx(mdBMaxSlider, wxString(wxT("%d ")) + _("dB")));
#endif
S.SetStyle(wxSL_VERTICAL | wxSL_INVERSE);
mdBMinSlider = S.Id(ID_dBMin).AddSlider(wxT(""), -10, -10, -120);
S.AddVariableText(_("- dB"), false, wxCENTER);
#if wxUSE_ACCESSIBILITY
mdBMinSlider->SetName(_("Min dB"));
mdBMinSlider->SetAccessible(new SliderAx(mdBMinSlider, wxString(wxT("%d ")) + _("dB")));
#endif
}
S.EndVerticalLay();
// -------------------------------------------------------------------
// ROW 2: Frequency ruler
// -------------------------------------------------------------------
S.AddSpace(1, 1);
mfreqRuler = new RulerPanel(parent, wxID_ANY);
mfreqRuler->ruler.SetBounds(0, 0, 100, 100); // Ruler can't handle small sizes
mfreqRuler->ruler.SetOrientation(wxHORIZONTAL);
mfreqRuler->ruler.SetLog(true);
mfreqRuler->ruler.SetRange(mLoFreq, mNyquist);
mfreqRuler->ruler.SetFormat(Ruler::IntFormat);
mfreqRuler->ruler.SetUnits(wxT(""));
mfreqRuler->ruler.SetFlip(true);
mfreqRuler->ruler.SetLabelEdges(true);
int h;
mfreqRuler->ruler.GetMaxSize(NULL, &h);
mfreqRuler->SetMinSize(wxSize(-1, h));
S.Prop(1);
S.AddWindow(mfreqRuler, wxEXPAND | wxALIGN_LEFT | wxRIGHT);
S.AddSpace(1, 1);
// -------------------------------------------------------------------
// ROW 3 and 4: Type, Order, Ripple, Subtype, Cutoff
// -------------------------------------------------------------------
S.AddSpace(1, 1);
S.SetSizerProportion(0);
S.StartMultiColumn(8, wxALIGN_CENTER);
{
wxASSERT(kNumTypes == WXSIZEOF(kTypeStrings));
wxArrayString typeChoices;
for (int i = 0; i < kNumTypes; i++)
{
typeChoices.Add(wxGetTranslation(kTypeStrings[i]));
}
mFilterTypeCtl = S.Id(ID_Type).AddChoice(_("&Filter Type:"), wxT(""), &typeChoices);
mFilterTypeCtl->SetValidator(wxGenericValidator(&mFilterType));
S.SetSizeHints(-1, -1);
wxArrayString orders;
for (int i = 1; i <= 10; i++)
{
orders.Add(wxString::Format(wxT("%d"), i));
}
/*i18n-hint: 'Order' means the complexity of the filter, and is a number between 1 and 10.*/
mFilterOrderCtl = S.Id(ID_Order).AddChoice(_("O&rder:"), wxT(""), &orders);
mFilterOrderCtl->SetValidator(wxGenericValidator(&mOrderIndex));
S.SetSizeHints(-1, -1);
S.AddSpace(1, 1);
FloatingPointValidator<float> vldRipple(1, &mRipple);
vldRipple.SetRange(MIN_Passband, MAX_Passband);
mRippleCtlP = S.AddVariableText(_("&Passband Ripple:"), false, wxALL | wxALIGN_RIGHT | wxALIGN_CENTER_VERTICAL);
mRippleCtl = S.Id(ID_Ripple).AddTextBox(wxT(""), wxT(""), 10);
mRippleCtl->SetName(_("Passband Ripple (dB)"));
mRippleCtl->SetValidator(vldRipple);
mRippleCtlU = S.AddVariableText(_("dB"), false, wxALL | wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL);
wxASSERT(kNumSubTypes == WXSIZEOF(kSubTypeStrings));
wxArrayString subTypeChoices;
for (int i = 0; i < kNumSubTypes; i++)
{
subTypeChoices.Add(wxGetTranslation(kSubTypeStrings[i]));
}
mFilterSubTypeCtl = S.Id(ID_SubType).AddChoice(_("&Subtype:"), wxT(""), &subTypeChoices);
mFilterSubTypeCtl->SetValidator(wxGenericValidator(&mFilterSubtype));
S.SetSizeHints(-1, -1);
FloatingPointValidator<float> vldCutoff(1, &mCutoff);
vldCutoff.SetRange(MIN_Cutoff, mNyquist - 1);
mCutoffCtl = S.Id(ID_Cutoff).AddTextBox(_("C&utoff:"), wxT(""), 10);
mCutoffCtl->SetName(_("Cutoff (Hz)"));
mCutoffCtl->SetValidator(vldCutoff);
S.AddUnits(_("Hz"));
FloatingPointValidator<float> vldStopbandRipple(1, &mStopbandRipple);
vldStopbandRipple.SetRange(MIN_Stopband, MAX_Stopband);
mStopbandRippleCtlP = S.AddVariableText(_("Minimum S&topband Attenuation:"), false, wxALL | wxALIGN_RIGHT | wxALIGN_CENTER_VERTICAL);
mStopbandRippleCtl = S.Id(ID_StopbandRipple).AddTextBox(wxT(""), wxT(""), 10);
mStopbandRippleCtl->SetName(_("Minimum S&topband Attenuation (dB)"));
mStopbandRippleCtl->SetValidator(vldStopbandRipple);
mStopbandRippleCtlU = S.AddVariableText(_("dB"), false, wxALL | wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL);
}
S.EndMultiColumn();
S.AddSpace(1, 1);
}
S.EndMultiColumn();
mFilterTypeCtl->SetFocus();
return;
}
void NyqBench::PopulateOrExchange(ShuttleGui & S)
{
S.StartHorizontalLay(wxEXPAND, true);
{
wxPanel *scriptp;
wxPanel *outputp;
wxStaticBoxSizer *scripts;
wxStaticBoxSizer *outputs;
wxBoxSizer *bs;
mSplitter = new wxSplitterWindow(this,
wxID_ANY,
wxDefaultPosition,
wxDefaultSize,
wxSP_LIVE_UPDATE |
wxSP_3DSASH |
wxSP_NOBORDER);
scriptp = new wxPanel(mSplitter,
wxID_ANY,
wxDefaultPosition,
wxDefaultSize,
wxNO_FULL_REPAINT_ON_RESIZE |
wxCLIP_CHILDREN);
bs = new wxBoxSizer(wxVERTICAL);
scriptp->SetSizer(bs);
mScriptBox = new wxStaticBox(scriptp,
wxID_ANY,
_("Script"));
scripts = new wxStaticBoxSizer(mScriptBox,
wxVERTICAL);
bs->Add(scripts, true, wxEXPAND);
mScript = new NyqTextCtrl(scriptp,
ID_SCRIPT,
wxEmptyString,
wxDefaultPosition,
wxDefaultSize,
wxTE_RICH2 | wxTE_RICH |
(mAutoWrap ? wxTE_BESTWRAP : wxTE_DONTWRAP) |
wxTE_NOHIDESEL |
wxTE_MULTILINE);
scripts->Add(mScript, true, wxEXPAND);
outputp = new wxPanel(mSplitter,
wxID_ANY,
wxDefaultPosition,
wxDefaultSize,
wxNO_FULL_REPAINT_ON_RESIZE |
wxCLIP_CHILDREN);
bs = new wxBoxSizer(wxVERTICAL);
outputp->SetSizer(bs);
mOutputBox = new wxStaticBox(outputp,
wxID_ANY,
_("Output"));
outputs = new wxStaticBoxSizer(mOutputBox,
wxVERTICAL);
bs->Add(outputs, true, wxEXPAND);
mOutput = new NyqTextCtrl(outputp,
ID_OUTPUT,
wxEmptyString,
wxDefaultPosition,
wxDefaultSize,
wxTE_READONLY |
#if !defined(__WXMAC__)
// I could not get the bloody horizontal scroll bar to appear on
// wxMac, so we can't use wxTE_DONTWRAP as you can't easily scroll
// left and right.
wxTE_DONTWRAP |
#endif
wxTE_NOHIDESEL |
wxTE_MULTILINE);
outputs->Add(mOutput, true, wxEXPAND);
switch (mSplitMode)
{
case wxSPLIT_VERTICAL:
mSplitter->SplitVertically(scriptp, outputp, 300);
break;
case wxSPLIT_HORIZONTAL:
mSplitter->SplitHorizontally(scriptp, outputp, 300);
break;
default:
mSplitter->Initialize((mShowCode ? scriptp : outputp));
break;
}
mSplitter->SetMinimumPaneSize(50);
S.AddSpace(5, 1);
S.Prop(true);
S.AddWindow(mSplitter, wxEXPAND);
S.AddSpace(5, 1);
mSplitter->SetMinSize(wxSize(600, 400));
}
S.EndHorizontalLay();
S.AddSpace(1, 5);
return;
}
