void GUIPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("Display"));
{
S.TieCheckBox(_("&Ergonomic order of Transport Toolbar buttons"),
wxT("/GUI/ErgonomicTransportButtons"),
true);
S.TieCheckBox(_("S&how 'How to Get Help' dialog box at program start up"),
wxT("/GUI/ShowSplashScreen"),
true);
S.AddSpace(10);
S.StartMultiColumn(2);
{
const wxString defaultRange = wxString::Format(wxT("%d"), ENV_DB_RANGE);
S.TieChoice(_("Meter dB &range:"),
ENV_DB_KEY,
defaultRange,
mRangeChoices,
mRangeCodes);
S.SetSizeHints(mRangeChoices);
S.TieChoice(_("&Language:"),
wxT("/Locale/Language"),
wxT(""),
mLangNames,
mLangCodes);
S.SetSizeHints(mLangNames);
S.TieChoice(_("Location of &Manual:"),
wxT("/GUI/Help"),
wxT("Local"),
mHtmlHelpChoices,
mHtmlHelpCodes);
S.SetSizeHints(mHtmlHelpChoices);
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Behaviors"));
{
S.TieCheckBox(_("&Beep on completion of longer activities"),
wxT("/GUI/BeepOnCompletion"),
false);
S.TieCheckBox(_("Re&tain labels if selection snaps to a label edge"),
wxT("/GUI/RetainLabels"),
false);
#ifdef EXPERIMENTAL_OUTPUT_DISPLAY
S.TieCheckBox(_("&Display a mono channel as virtual stereo"),
wxT("/GUI/MonoAsVirtualStereo"),
false);
#endif
}
S.EndStatic();
}
void MidiIOPrefs::PopulateOrExchange( ShuttleGui & S ) {
wxArrayString empty;
S.SetBorder(2);
S.StartStatic(_("Interface"));
{
S.StartMultiColumn(2);
{
S.Id(HostID);
mHost = S.TieChoice(_("Host") + wxString(wxT(":")),
wxT("/MidiIO/Host"),
wxT(""),
mHostNames,
mHostLabels);
S.SetSizeHints(mHostNames);
S.AddPrompt(_("Using:"));
S.AddFixedText(wxString(Pa_GetVersionText(), wxConvLocal));
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Playback"));
{
S.StartMultiColumn(2);
{
S.Id(PlayID);
mPlay = S.AddChoice(_("Device") + wxString(wxT(":")),
wxEmptyString,
&empty);
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Recording"));
{
S.StartMultiColumn(2);
{
S.Id(RecordID);
mRecord = S.AddChoice(_("Device") + wxString(wxT(":")),
wxEmptyString,
&empty);
S.Id(ChannelsID);
/*
mChannels = S.AddChoice(_("Channels") + wxString(wxT(":")),
wxEmptyString,
&empty);
*/
}
S.EndMultiColumn();
}
S.EndStatic();
}
void ModulePrefs::PopulateOrExchange(ShuttleGui & S)
{
wxArrayString StatusChoices;
StatusChoices.Add( _("Disabled" ) );
StatusChoices.Add( _("Enabled" ) );
StatusChoices.Add( _("Ask" ) );
StatusChoices.Add( _("Failed" ) );
StatusChoices.Add( _("New" ) );
S.SetBorder(2);
S.StartStatic(_(""));
{
S.AddFixedText(_("These are experimental Modules. Enable them only if you've read the manual\nand know what you are doing.") );
S.AddFixedText(wxString(wxT(" ")) + _("'Ask' means Audacity will ask if you want to load the plug-each time it starts.") );
S.AddFixedText(wxString(wxT(" ")) + _("'Failed' means Audacity thinks the plug-in is broken and won't run it.") );
S.AddFixedText(wxString(wxT(" ")) + _("'New' is like 'Ask', but asks just once.") );
S.StartMultiColumn( 2 );
int i;
for(i=0;i<(int)mModules.GetCount();i++)
S.TieChoice( mModules[i], mStatuses[i], &StatusChoices );
S.EndMultiColumn();
lse);
}
S.EndStatic();
}
void TruncSilenceDialog::PopulateOrExchange(ShuttleGui & S)
{
S.AddSpace(0, 5);
S.StartHorizontalLay();
{
// Action choices
wxArrayString processChoices;
processChoices.Add(_("Truncate Detected Silence"));
processChoices.Add(_("Compress Excess Silence"));
S.Id(ID_PROCESS_CHOICE).TieChoice(wxT(""),
mEffect->mProcessIndex,
&processChoices);
S.SetSizeHints(-1, -1);
}
S.EndHorizontalLay();
S.StartStatic(_("Detect Silence"));
{
S.StartMultiColumn(3, wxALIGN_CENTER_HORIZONTAL);
{
// Threshold
wxArrayString choices(Enums::NumDbChoices, Enums::GetDbChoices());
S.TieChoice(_("Level:"),
mEffect->mTruncDbChoiceIndex,
&choices);
S.SetSizeHints(-1, -1);
S.AddSpace(0); // 'choices' aleady includes units.
// Ignored silence
S.Id(ID_DETECT_SILENCE).TieNumericTextBox(_("Duration:"),
mEffect->mInitialAllowedSilence,
12);
S.AddUnits(wxT("seconds"));
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartMultiColumn(3, wxALIGN_CENTER_HORIZONTAL);
{
// Truncation / Compression factor
S.Id( ID_TRUNCATION_DURATION ).TieNumericTextBox(_("Truncate to:"),
mEffect->mTruncLongestAllowedSilence,
12);
S.AddUnits(wxT("seconds"));
S.Id( ID_COMPRESS_FACTOR ).TieNumericTextBox(_("Compress to:"),
mEffect->mSilenceCompressPercent,
12);
S.AddUnits(wxT("percent"));
}
S.EndMultiColumn();
// Warnings
pWarning = S.AddVariableText( wxT("") );
UpdateUI();
}
void TimeDialog::PopulateOrExchange(ShuttleGui &S)
{
S.SetBorder(5);
S.StartVerticalLay(true);
{
S.StartStatic(mPrompt, true);
{
mTimeCtrl = new
TimeTextCtrl(this,
wxID_ANY,
wxT(""),
mTime,
mRate,
wxDefaultPosition,
wxDefaultSize,
true);
mTimeCtrl->SetName(mPrompt);
mTimeCtrl->SetFormatString(mTimeCtrl->GetBuiltinFormat(mFormat));
S.AddWindow(mTimeCtrl);
mTimeCtrl->EnableMenu();
}
S.EndStatic();
}
S.EndVerticalLay();
S.AddStandardButtons();
TransferDataToWindow();
Layout();
Fit();
SetMinSize(GetSize());
Center();
}
void ExportFFmpegWMAOptions::PopulateOrExchange(ShuttleGui & S)
{
S.StartHorizontalLay(wxEXPAND, 0);
{
S.StartStatic(_("WMA Export Setup"), 0);
{
S.StartTwoColumn();
{
S.TieChoice(_("Bit Rate:"), wxT("/FileFormats/WMABitRate"),
180189, mBitRateNames, mBitRateLabels);
}
S.EndTwoColumn();
}
S.EndStatic();
}
S.EndHorizontalLay();
S.AddStandardButtons();
Layout();
Fit();
SetMinSize(GetSize());
Center();
return;
}
void ModulePrefs::PopulateOrExchange(ShuttleGui & S)
{
wxArrayString StatusChoices;
StatusChoices.Add( _("Disabled" ) );
StatusChoices.Add( _("Enabled" ) );
StatusChoices.Add( _("Ask" ) );
StatusChoices.Add( _("Failed" ) );
StatusChoices.Add( _("New" ) );
S.SetBorder(2);
S.StartStatic(wxT(""));
{
S.AddFixedText(_("These are experimental modules. Enable them only if you've read the Audacity Manual\nand know what you are doing.") );
S.AddFixedText(wxString(wxT(" ")) + _("'Ask' means Audacity will ask if you want to load the module each time it starts.") );
S.AddFixedText(wxString(wxT(" ")) + _("'Failed' means Audacity thinks the module is broken and won't run it.") );
S.AddFixedText(wxString(wxT(" ")) + _("'New' means no choice has been made yet.") );
S.AddFixedText(_("Changes to these settings only take effect when Audacity starts up."));
S.StartScroller();
{
S.StartMultiColumn( 2 );
int i;
for(i=0;i<(int)mModules.GetCount();i++)
S.TieChoice( mModules[i], mStatuses[i], &StatusChoices );
S.EndMultiColumn();
}
if( mModules.GetCount() < 1 )
{
S.AddFixedText( _("No modules were found") );
}
S.EndScroller();
}
S.EndStatic();
}
void DirectoriesPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("Temporary files directory"));
{
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol(1);
S.Id(TempDirID);
mTempDir = S.TieTextBox(_("&Location:"),
wxT("/Directories/TempDir"),
wxT(""),
30);
S.Id(ChooseButtonID);
S.AddButton(_("C&hoose..."));
S.AddFixedText(_("Free Space:"));
mFreeSpace = S.AddVariableText(wxT(""));
}
S.EndMultiColumn();
}
S.EndStatic();
#ifdef DEPRECATED_AUDIO_CACHE
// See http://bugzilla.audacityteam.org/show_bug.cgi?id=545.
S.StartStatic(_("Audio cache"));
{
S.TieCheckBox(_("Play and/or record using &RAM (useful for slow drives)"),
wxT("/Directories/CacheBlockFiles"),
false);
S.StartTwoColumn();
{
S.TieNumericTextBox(_("Mi&nimum Free Memory (MB):"),
wxT("/Directories/CacheLowMem"),
16,
9);
}
S.EndTwoColumn();
S.AddVariableText(_("If the available system memory falls below this value, audio will no longer\nbe cached in memory and will be written to disk."))->Wrap(600);
}
S.EndStatic();
#endif // DEPRECATED_AUDIO_CACHE
}
void DirectoriesPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("Temporary files directory"));
{
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol(1);
S.Id(TempDirID);
mTempDir = S.TieTextBox(_("Location:"),
wxT("/Directories/TempDir"),
wxT(""),
30);
S.Id(ChooseButtonID);
S.AddButton(_("Choose..."));
S.AddFixedText(_("Free Space:"));
mFreeSpace = S.AddVariableText(wxT(""));
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Audio cache"));
{
S.TieCheckBox(_("Play and/or record using RAM (useful for slow drives)"),
wxT("/Directories/CacheBlockFiles"),
false);
S.StartTwoColumn();
{
S.TieTextBox(_("Minimum Free Memory (MB):"),
wxT("/Directories/CacheLowMem"),
16,
9);
}
S.EndTwoColumn();
S.AddVariableText(_("If the available system memory falls below this value, audio will no longer\nbe cached in memory and will be written to disk."))->Wrap(600);
}
S.EndStatic();
}
/// Places controls on the panel and also exchanges data with them.
void MousePrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("Mouse Bindings (default values, not configurable)"), 1);
{
mList = S.AddListControlReportMode();
}
S.EndStatic();
}
/// Normally in classes derived from PrefsPanel this function
/// is used both to populate the panel and to exchange data with it.
/// With KeyConfigPrefs all the exchanges are handled specially,
/// so this is only used in populating the panel.
void KeyConfigPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("Key Bindings"), 1);
{
S.StartHorizontalLay(wxALIGN_CENTRE, false);
{
S.Id(CategoryID);
mCat = S.AddChoice(_("C&ategory:"),
mCats[0],
&mCats);
}
S.EndHorizontalLay();
mList = S.Id(CommandsListID).AddListControlReportMode();
mList->SetName(_("Key Bindings"));
S.StartThreeColumn();
{
if (!mKey) {
mKey = new wxTextCtrl(this,
CurrentComboID,
wxT(""),
wxDefaultPosition,
#if defined(__WXMAC__)
wxSize(300, -1));
#else
wxSize(210, -1));
#endif
mKey->Connect(wxEVT_KEY_DOWN,
wxKeyEventHandler(KeyConfigPrefs::OnCaptureKeyDown));
mKey->Connect(wxEVT_CHAR,
wxKeyEventHandler(KeyConfigPrefs::OnCaptureChar));
}
S.AddWindow(mKey);
/* i18n-hint: (verb)*/
S.Id(SetButtonID).AddButton(_("Set"));
S.Id(ClearButtonID).AddButton(_("Cl&ear"));
}
S.EndThreeColumn();
#if defined(__WXMAC__)
S.AddFixedText(_("Note: Pressing Cmd+Q will quit. All other keys are valid."));
#endif
S.StartThreeColumn();
{
S.Id(ImportButtonID).AddButton(_("&Import..."));
S.Id(ExportButtonID).AddButton(_("&Export..."));
S.Id(AssignDefaultsButtonID).AddButton(_("&Defaults"));
}
S.EndThreeColumn();
}
void TracksBehaviorsPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartScroller();
S.StartStatic(_("Behaviors"));
{
S.TieCheckBox(_("A&uto-select, if selection required"),
wxT("/GUI/SelectAllOnNone"),
false);
/* i18n-hint: Cut-lines are lines that can expand to show the cut audio.*/
S.TieCheckBox(_("Enable cut &lines"),
wxT("/GUI/EnableCutLines"),
false);
S.TieCheckBox(_("Enable &dragging selection edges"),
wxT("/GUI/AdjustSelectionEdges"),
true);
S.TieCheckBox(_("Editing a clip can &move other clips"),
wxT("/GUI/EditClipCanMove"),
true);
S.TieCheckBox(_("\"Move track focus\" c&ycles repeatedly through tracks"),
wxT("/GUI/CircularTrackNavigation"),
false);
S.TieCheckBox(_("&Type to create a label"),
wxT("/GUI/TypeToCreateLabel"),
true);
S.TieCheckBox(_("Use dialog for the &name of a new label"),
wxT("/GUI/DialogForNameNewLabel"),
false);
#ifdef EXPERIMENTAL_SCROLLING_LIMITS
S.TieCheckBox(_("Enable scrolling left of &zero"),
ScrollingPreferenceKey(),
ScrollingPreferenceDefault());
#endif
S.TieCheckBox(_("Advanced &vertical zooming"),
wxT("/GUI/VerticalZooming"),
false);
S.AddSpace(10);
S.StartMultiColumn(2);
{
S.TieChoice(_("Solo &Button:"),
wxT("/GUI/Solo"),
wxT("Standard"),
mSoloChoices,
mSoloCodes);
}
S.EndMultiColumn();
}
S.EndStatic();
S.EndScroller();
}
/// Create the dialog contents, or exchange data with it.
void SmartRecordPrefs::PopulateOrExchange( ShuttleGui & S)
{
S.StartStatic( _("Pause Recording on Silence") );
{
S.TieCheckBox( _("Pause Recording on Silence"), wxT("/AudioIO/PauseRecOnSilence"),false);
S.StartMultiColumn(2, wxEXPAND);
S.SetStretchyCol(1);
S.TieSlider(_("Silence level (dB):"), wxT("/AudioIO/SilenceLevel"), -50, 0, -60);
S.EndMultiColumn();
}
S.EndStatic();
}
/// Defines the dialog and does data exchange with it.
void BatchProcessDialog::PopulateOrExchange(ShuttleGui &S)
{
S.StartVerticalLay(true);
{
/*i18n-hint: A chain is a sequence of commands that can be applied
* to one or more audio files.*/
S.StartStatic(_("&Select Chain"), true);
{
S.SetStyle(wxSUNKEN_BORDER | wxLC_REPORT | wxLC_HRULES | wxLC_VRULES |
wxLC_SINGLE_SEL);
mChains = S.Id(ChainsListID).AddListControlReportMode();
mChains->InsertColumn(0, _("Chain"), wxLIST_FORMAT_LEFT);
}
S.EndStatic();
S.StartHorizontalLay(wxALIGN_RIGHT, false);
{
S.SetBorder(10);
S.Id(ApplyToProjectID).AddButton(_("Apply to Current &Project"));
S.Id(ApplyToFilesID).AddButton(_("Apply to &Files..."));
S.Id(wxID_CANCEL).AddButton(_("&Cancel"));
}
S.EndHorizontalLay();
}
S.EndVerticalLay();
wxArrayString names = mBatchCommands.GetNames();
for (int i = 0; i < (int)names.GetCount(); i++) {
mChains->InsertItem(i, names[i]);
}
// Get and validate the currently active chain
wxString name = gPrefs->Read(wxT("/Batch/ActiveChain"), wxT(""));
int item = mChains->FindItem(-1, name);
if (item == -1) {
item = 0;
name = mChains->GetItemText(0);
}
// Select the name in the list...this will fire an event.
mChains->SetItemState(item, wxLIST_STATE_SELECTED, wxLIST_STATE_SELECTED);
Layout();
Fit();
SetSizeHints(GetSize());
Center();
// Set the column size for the chains list.
wxSize sz = mChains->GetClientSize();
mChains->SetColumnWidth(0, sz.x);
}
/// Defines the dialog and does data exchange with it.
void BatchPrefs::PopulateOrExchange( ShuttleGui & S )
{
S.StartHorizontalLay( wxEXPAND, 0 );
S.SetBorder( 2 );
S.StartStatic( _("Behaviors"),1 );
{
#ifdef __WXDEBUG__
S.TieCheckBox( _("&Don't apply effects in batch mode"),
wxT("/Batch/Debug"), false);
#endif
}
S.EndStatic();
S.EndHorizontalLay();
return;
}
void ExportFFmpegAACOptions::PopulateOrExchange(ShuttleGui & S)
{
S.StartStatic(_("AAC Export Setup"), 1);
{
S.TieSlider(wxT("Quality:"),wxT("/FileFormats/AACQuality"),100,500,10);
}
S.EndStatic();
S.AddStandardButtons();
Layout();
Fit();
SetMinSize(GetSize());
Center();
return;
}
void WaveformPrefs::PopulateOrExchange(ShuttleGui & S)
{
mPopulating = true;
S.SetBorder(2);
// S.StartStatic(_("Track Settings"));
{
mDefaultsCheckbox = 0;
if (mWt) {
/* i18n-hint: use is a verb */
mDefaultsCheckbox = S.Id(ID_DEFAULTS).TieCheckBox(_("&Use Preferences"), mDefaulted);
}
S.StartStatic(_("Display"));
{
S.StartTwoColumn();
{
mScaleChoice =
S.Id(ID_SCALE).TieChoice(_("S&cale") + wxString(wxT(":")),
*(int*)&mTempSettings.scaleType,
&mScaleChoices);
mRangeChoice =
S.Id(ID_RANGE).TieChoice(_("Waveform dB &range") + wxString(wxT(":")),
*(int*)&mTempSettings.dBRange,
&mRangeChoices);
S.SetSizeHints(mRangeChoices);
}
S.EndTwoColumn();
}
S.EndStatic();
}
// S.EndStatic();
/*
S.StartStatic(_("Global settings"));
{
}
S.EndStatic();
*/
EnableDisableRange();
mPopulating = false;
}
void WaveformPrefs::PopulateOrExchange(ShuttleGui & S)
{
mPopulating = true;
S.SetBorder(2);
// S.StartStatic(_("Track Settings"));
{
mDefaultsCheckbox = 0;
if (mWt) {
/* i18n-hint: use is a verb */
mDefaultsCheckbox = S.Id(ID_DEFAULTS).TieCheckBox(_("Use Preferences"), mDefaulted);
}
S.StartStatic(_("Display"));
{
S.StartTwoColumn();
{
S.Id(ID_SCALE).TieChoice(_("S&cale") + wxString(wxT(":")),
*(int*)&mTempSettings.scaleType,
&mScaleChoices);
}
S.EndTwoColumn();
}
S.EndStatic();
}
// S.EndStatic();
/*
S.StartStatic(_("Global settings"));
{
}
S.EndStatic();
*/
S.StartMultiColumn(2, wxALIGN_RIGHT);
{
S.Id(ID_APPLY).AddButton(_("Appl&y"));
}
S.EndMultiColumn();
mPopulating = false;
}
void ProjectsPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("When saving a project that depends on other audio files"));
{
S.StartRadioButtonGroup(wxT("/FileFormats/SaveProjectWithDependencies"), wxT("ask"));
{
S.TieRadioButton(_("&Always copy all audio into project (safest)"),
wxT("copy"));
S.TieRadioButton(_("Do ¬ copy any audio"),
wxT("never"));
S.TieRadioButton(_("As&k user"),
wxT("ask"));
}
S.EndRadioButtonGroup();
}
S.EndStatic();
}
void BatchCommandDialog::PopulateOrExchange(ShuttleGui &S)
{
S.StartVerticalLay(true);
{
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol(1);
mCommand = S.AddTextBox(_("&Command"), wxT(""), 20);
mCommand->SetEditable(false);
mEditParams = S.Id(EditParamsButtonID).AddButton(_("&Edit Parameters"));
mEditParams->Enable( false ); // disable button as box is empty
}
S.EndMultiColumn();
S.StartMultiColumn(2, wxEXPAND);
{
S.SetStretchyCol(1);
mParameters = S.AddTextBox(_("&Parameters"), wxT(""), 0);
mParameters->SetEditable(false);
}
S.EndMultiColumn();
S.StartStatic(_("C&hoose command"), true);
{
S.SetStyle(wxSUNKEN_BORDER | wxLC_LIST | wxLC_SINGLE_SEL);
mChoices = S.Id(CommandsListID).AddListControl();
}
S.EndStatic();
}
S.EndVerticalLay();
S.AddStandardButtons();
for(int i=0;i<99;i++)
{
mChoices->InsertItem( i, wxString::Format(wxT("Item%02i"),i));
}
PopulateCommandList();
SetSize(350, 400);
SetSizeHints(GetSize());
Center();
}
void ModulePrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("Enable these Modules (if present), next time Audacity is started"));
{
S.AddFixedText(_("These are experimental. Enable them only if you've read the manual\nand know what you are doing.") );
S.TieCheckBox(_("mod-&script-pipe"),
wxT("/Module/mod-script-pipe"),
false);
S.TieCheckBox(_("mod-&nyq-bench"),
wxT("/Module/mod-nyq-bench"),
false);
S.TieCheckBox(_("mod-&track-panel"),
wxT("/Module/mod-track-panel"),
false);
}
S.EndStatic();
}
/// Normally in classes derived from PrefsPanel this function
/// is used both to populate the panel and to exchange data with it.
/// With KeyConfigPrefs all the exchanges are handled specially,
/// so this is only used in populating the panel.
void KeyConfigPrefs::PopulateOrExchange( ShuttleGui & S )
{
S.StartStatic( _("Key Bindings"), 1 );
mList = S.Id( CommandsListID ).AddListControlReportMode();
S.StartHorizontalLay( wxALIGN_LEFT, 0);
{
// LLL: Moved here from Populate. On the Mac, the control
// would not accept focus when using the mouse, but it
// would when tabbing to the field. Not really sure
// why...just glad it works now. :-)
// The SysKeyText ctrl is so special that we aren't
// going to include it into Audacity's version of ShuttleGui.
// So instead we create it here, and we can add it into
// the sizer scheme later...
mCurrentComboText = new SysKeyTextCtrl(
this, CurrentComboID, wxT(""),
wxDefaultPosition, wxSize(115, -1), 0 );
// AddWindow is a generic 'Add' for ShuttleGui.
// It allows us to add 'foreign' controls.
S.AddWindow( mCurrentComboText )->MoveAfterInTabOrder( mList );
S.Id( SetButtonID ).AddButton( _("S&et"));
S.Id( ClearButtonID ).AddButton( _("&Clear"));
}
S.EndHorizontalLay();
#ifdef __WXMAC__
S.AddFixedText( _("Note: Pressing Cmd+Q will quit. All other keys are valid."));
#endif
S.StartHorizontalLay( wxALIGN_LEFT, 0);
{
S.Id( AssignDefaultsButtonID ).AddButton( _("&Defaults"));
S.Id( SaveButtonID ).AddButton( _("&Save..."));
S.Id( LoadButtonID ).AddButton( _("&Load..."));
}
S.EndHorizontalLay();
S.EndStatic();
return;
}
void WarningsPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("Show Warnings/Prompts"));
{
S.TieCheckBox(_("When saving &projects"),
wxT("/Warnings/FirstProjectSave"),
true);
S.TieCheckBox(_("When saving &empty project"),
wxT("/GUI/EmptyCanBeDirty"),
true);
S.TieCheckBox(_("When &disk space is getting low"),
wxT("/Warnings/DiskSpaceWarning"),
true);
S.TieCheckBox(_("When mixing down to &stereo during export"),
wxT("/Warnings/MixStereo"),
true);
S.TieCheckBox(_("When mixing down to &mono during export"),
wxT("/Warnings/MixMono"),
true);
}
S.EndStatic();
}
void SpectrumPrefs::PopulateOrExchange(ShuttleGui & S)
{
mPopulating = true;
S.SetBorder(2);
// S.StartStatic(_("Track Settings"));
// {
mDefaultsCheckbox = 0;
if (mWt) {
/* i18n-hint: use is a verb */
mDefaultsCheckbox = S.Id(ID_DEFAULTS).TieCheckBox(_("Use Preferences"), mDefaulted);
}
S.StartStatic(_("Scale"));
{
S.StartTwoColumn();
{
S.Id(ID_SCALE).TieChoice(_("S&cale") + wxString(wxT(":")),
*(int*)&mTempSettings.scaleType,
&mScaleChoices);
mMinFreq =
S.Id(ID_MINIMUM).TieNumericTextBox(_("Mi&nimum Frequency (Hz):"),
mTempSettings.minFreq,
12);
mMaxFreq =
S.Id(ID_MAXIMUM).TieNumericTextBox(_("Ma&ximum Frequency (Hz):"),
mTempSettings.maxFreq,
12);
}
S.EndTwoColumn();
}
S.EndStatic();
S.StartStatic(_("Colors"));
{
S.StartTwoColumn();
{
mGain =
S.Id(ID_GAIN).TieNumericTextBox(_("&Gain (dB):"),
mTempSettings.gain,
8);
mRange =
S.Id(ID_RANGE).TieNumericTextBox(_("&Range (dB):"),
mTempSettings.range,
8);
mFrequencyGain =
S.Id(ID_FREQUENCY_GAIN).TieNumericTextBox(_("Frequency g&ain (dB/dec):"),
mTempSettings.frequencyGain,
4);
}
S.Id(ID_GRAYSCALE).TieCheckBox(_("S&how the spectrum using grayscale colors"),
mTempSettings.isGrayscale);
S.EndTwoColumn();
}
S.EndStatic();
S.StartStatic(_("Algorithm"));
{
S.StartMultiColumn(2);
{
mAlgorithmChoice =
S.Id(ID_ALGORITHM).TieChoice(_("A&lgorithm") + wxString(wxT(":")),
*(int*)&mTempSettings.algorithm,
&mAlgorithmChoices);
S.Id(ID_WINDOW_SIZE).TieChoice(_("Window &size:"),
mTempSettings.windowSize,
&mSizeChoices);
S.SetSizeHints(mSizeChoices);
S.Id(ID_WINDOW_TYPE).TieChoice(_("Window &type:"),
mTempSettings.windowType,
&mTypeChoices);
S.SetSizeHints(mTypeChoices);
#ifdef EXPERIMENTAL_ZERO_PADDED_SPECTROGRAMS
mZeroPaddingChoiceCtrl =
S.Id(ID_PADDING_SIZE).TieChoice(_("&Zero padding factor") + wxString(wxT(":")),
mTempSettings.zeroPaddingFactor,
&mZeroPaddingChoices);
S.SetSizeHints(mZeroPaddingChoices);
#endif
}
S.EndMultiColumn();
}
S.EndStatic();
#ifndef SPECTRAL_SELECTION_GLOBAL_SWITCH
S.Id(ID_SPECTRAL_SELECTION).TieCheckBox(_("Ena&ble Spectral Selection"),
mTempSettings.spectralSelection);
#endif
#ifdef EXPERIMENTAL_FFT_Y_GRID
S.TieCheckBox(_("Show a grid along the &Y-axis"),
mTempSettings.fftYGrid);
#endif //EXPERIMENTAL_FFT_Y_GRID
#ifdef EXPERIMENTAL_FIND_NOTES
/* i18n-hint: FFT stands for Fast Fourier Transform and probably shouldn't be translated*/
S.StartStatic(_("FFT Find Notes"));
{
S.StartTwoColumn();
{
mFindNotesMinA =
S.TieNumericTextBox(_("Minimum Amplitude (dB):"),
mTempSettings.fftFindNotes,
8);
mFindNotesN =
S.TieNumericTextBox(_("Max. Number of Notes (1..128):"),
mTempSettings.findNotesMinA,
8);
}
S.EndTwoColumn();
S.TieCheckBox(_("&Find Notes"),
mTempSettings.numberOfMaxima);
S.TieCheckBox(_("&Quantize Notes"),
mTempSettings.findNotesQuantize);
}
S.EndStatic();
#endif //EXPERIMENTAL_FIND_NOTES
// S.EndStatic();
#ifdef SPECTRAL_SELECTION_GLOBAL_SWITCH
S.StartStatic(_("Global settings"));
{
S.TieCheckBox(_("Ena&ble spectral selection"),
SpectrogramSettings::Globals::Get().spectralSelection);
}
S.EndStatic();
#endif
EnableDisableSTFTOnlyControls();
mPopulating = false;
}
void EffectTruncSilence::PopulateOrExchange(ShuttleGui & S)
{
wxASSERT(kNumActions == WXSIZEOF(kActionStrings));
wxArrayString actionChoices;
for (int i = 0; i < kNumActions; i++)
{
actionChoices.Add(wxGetTranslation(kActionStrings[i]));
}
S.AddSpace(0, 5);
S.StartStatic(_("Detect Silence"));
{
S.StartMultiColumn(3, wxALIGN_CENTER_HORIZONTAL);
{
// Threshold
mTruncDbChoice = S.AddChoice(_("Level:"), wxT(""), &mDbChoices);
mTruncDbChoice->SetValidator(wxGenericValidator(&mTruncDbChoiceIndex));
S.SetSizeHints(-1, -1);
S.AddSpace(0); // 'choices' already includes units.
// Ignored silence
FloatingPointValidator<double> vldDur(3, &mInitialAllowedSilence, NUM_VAL_NO_TRAILING_ZEROES);
vldDur.SetRange(MIN_Minimum, MAX_Minimum);
mInitialAllowedSilenceT = S.AddTextBox(_("Duration:"), wxT(""), 12);
mInitialAllowedSilenceT->SetValidator(vldDur);
S.AddUnits(wxT("seconds"));
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Action"));
{
S.StartHorizontalLay();
{
// Action choices
mActionChoice = S.AddChoice(wxT(""), wxT(""), &actionChoices);
mActionChoice->SetValidator(wxGenericValidator(&mActionIndex));
S.SetSizeHints(-1, -1);
}
S.EndHorizontalLay();
S.StartMultiColumn(3, wxALIGN_CENTER_HORIZONTAL);
{
// Truncation / Compression factor
FloatingPointValidator<double> vldTrunc(3, &mTruncLongestAllowedSilence, NUM_VAL_NO_TRAILING_ZEROES);
vldTrunc.SetRange(MIN_Truncate, MAX_Truncate);
mTruncLongestAllowedSilenceT = S.AddTextBox(_("Truncate to:"), wxT(""), 12);
mTruncLongestAllowedSilenceT->SetValidator(vldTrunc);
S.AddUnits(wxT("seconds"));
FloatingPointValidator<double> vldComp(3, &mSilenceCompressPercent, NUM_VAL_NO_TRAILING_ZEROES);
vldComp.SetRange(MIN_Compress, MAX_Compress);
mSilenceCompressPercentT = S.AddTextBox(_("Compress to:"), wxT(""), 12);
mSilenceCompressPercentT->SetValidator(vldComp);
S.AddUnits(wxT("percent"));
}
S.EndMultiColumn();
S.StartMultiColumn(2, wxALIGN_CENTER_HORIZONTAL);
{
mIndependent = S.AddCheckBox(_("Truncate tracks independently"),
mbIndependent ? wxT("true") : wxT("false"));
}
S.EndMultiColumn();
}
S.EndStatic();
UpdateUI();
}
void EffectsPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartScroller();
S.StartStatic(_("Enable Effects"));
{
#if USE_AUDIO_UNITS
S.TieCheckBox(_("Audio Unit"),
wxT("/AudioUnit/Enable"),
true);
#endif
// JKC: LADSPA, LV2, Nyquist, VST, VAMP should not be translated.
#if USE_LADSPA
S.TieCheckBox(wxT("&LADSPA"),
wxT("/Ladspa/Enable"),
true);
#endif
#if USE_LV2
S.TieCheckBox(wxT("LV&2"),
wxT("/LV2/Enable"),
true);
#endif
#if USE_NYQUIST
S.TieCheckBox(wxT("N&yquist"),
wxT("/Nyquist/Enable"),
true);
#endif
#if USE_VAMP
S.TieCheckBox(wxT("&Vamp"),
wxT("/VAMP/Enable"),
true);
#endif
#if USE_VST
S.TieCheckBox(wxT("V&ST"),
wxT("/VST/Enable"),
true);
#endif
}
S.EndStatic();
S.StartStatic(_("Effect Options"));
{
S.StartMultiColumn(2);
{
wxArrayString visualgroups;
wxArrayString prefsgroups;
visualgroups.Add(_("Sorted by Effect Name"));
visualgroups.Add(_("Sorted by Publisher and Effect Name"));
visualgroups.Add(_("Sorted by Type and Effect Name"));
visualgroups.Add(_("Grouped by Publisher"));
visualgroups.Add(_("Grouped by Type"));
prefsgroups.Add(wxT("sortby:name"));
prefsgroups.Add(wxT("sortby:publisher:name"));
prefsgroups.Add(wxT("sortby:type:name"));
prefsgroups.Add(wxT("groupby:publisher"));
prefsgroups.Add(wxT("groupby:type"));
wxChoice *c = S.TieChoice(_("S&ort or Group:"),
wxT("/Effects/GroupBy"),
wxT("name"),
visualgroups,
prefsgroups);
c->SetMinSize(c->GetBestSize());
S.TieNumericTextBox(_("&Maximum effects per group (0 to disable):"),
wxT("/Effects/MaxPerGroup"),
#if defined(__WXGTK__)
15,
#else
0,
#endif
5);
}
S.EndMultiColumn();
}
S.EndStatic();
#ifndef EXPERIMENTAL_EFFECT_MANAGEMENT
S.StartStatic(_("Plugin Options"));
{
S.TieCheckBox(_("Check for updated plugins when Audacity starts"),
wxT("/Plugins/CheckForUpdates"),
true);
S.TieCheckBox(_("Rescan plugins next time Audacity is started"),
wxT("/Plugins/Rescan"),
false);
}
S.EndStatic();
#endif
#ifdef EXPERIMENTAL_EQ_SSE_THREADED
S.StartStatic(_("Instruction Set"));
{
S.TieCheckBox(_("&Use SSE/SSE2/.../AVX"),
wxT("/SSE/GUI"),
true);
}
S.EndStatic();
#endif
S.EndScroller();
}
void TagsEditor::PopulateOrExchange(ShuttleGui & S)
{
S.StartVerticalLay();
{
S.StartHorizontalLay(wxALIGN_LEFT, false);
{
S.AddUnits(_("Use arrow keys (or RETURN key after editing) to navigate fields."));
}
S.EndHorizontalLay();
if (mGrid == NULL) {
mGrid = new Grid(S.GetParent(),
wxID_ANY,
wxDefaultPosition,
wxDefaultSize,
wxSUNKEN_BORDER);
mStringRenderer = new wxGridCellStringRenderer;
mComboEditor = new ComboEditor(wxArrayString(), true);
mGrid->RegisterDataType(wxT("Combo"), mStringRenderer, mComboEditor);
mGrid->SetColLabelSize(mGrid->GetDefaultRowSize());
wxArrayString cs(WXSIZEOF(names), names);
// Build the initial (empty) grid
mGrid->CreateGrid(0, 2);
mGrid->SetRowLabelSize(0);
mGrid->SetDefaultCellAlignment(wxALIGN_LEFT, wxALIGN_CENTER);
mGrid->SetColLabelValue(0, _("Tag"));
mGrid->SetColLabelValue(1, _("Value"));
// Resize the name column and set default row height.
wxComboBox tc(this, wxID_ANY, wxT(""), wxDefaultPosition, wxDefaultSize, cs);
mGrid->SetColSize(0, tc.GetSize().x);
mGrid->SetColMinimalWidth(0, tc.GetSize().x);
}
S.Prop(true);
S.AddWindow(mGrid, wxEXPAND | wxALL);
S.StartMultiColumn(4, wxALIGN_CENTER);
{
S.Id(AddID).AddButton(_("&Add"));
S.Id(RemoveID).AddButton(_("&Remove"));
S.AddTitle(wxT(" "));
S.Id(ClearID).AddButton(_("Cl&ear"));
}
S.EndMultiColumn();
S.StartHorizontalLay(wxALIGN_CENTRE, false);
{
S.StartStatic(_("Genres"));
{
S.StartMultiColumn(4, wxALIGN_CENTER);
{
S.Id(EditID).AddButton(_("E&dit..."));
S.Id(ResetID).AddButton(_("Rese&t..."));
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Template"));
{
S.StartMultiColumn(4, wxALIGN_CENTER);
{
S.Id(LoadID).AddButton(_("&Load..."));
S.Id(SaveID).AddButton(_("&Save..."));
S.AddTitle(wxT(" "));
S.Id(SaveDefaultsID).AddButton(_("Set De&fault"));
}
S.EndMultiColumn();
}
S.EndStatic();
}
S.EndHorizontalLay();
}
S.EndVerticalLay();
S.AddStandardButtons(eOkButton | eCancelButton);
}
void QualityPrefs::PopulateOrExchange( ShuttleGui & S )
{
S.SetBorder( 2 );
S.StartStatic(_("Sampling"),0 );
{
S.StartTwoColumn();
S.AddPrompt( _("Default Sample Rate:") );
DefineSampleRateControl( S ); // A tricky control.
S.TieChoice(_("Default Sample Format:"),
wxT("/SamplingRate/DefaultProjectSampleFormat"),
floatSample, mmSampleFormatNames, mmSampleFormatLabels );
// JKC For the old style of layout, uncomment the next line.
// #define OLD_STYLE_LAYOUT
// Once we've chosen which layout to use we'll remove the
// other one. (June/2006).
#ifdef OLD_STYLE_LAYOUT
S.TieChoice(_("Real-time sample rate converter:"),
wxT("/Quality/LibresampleSampleRateConverter"),
(int)0, mConverterNames, mConverterLabels),
S.TieChoice(_("High-quality sample rate converter:"),
wxT("/Quality/LibresampleHQSampleRateConverter"),
(int)1, mConverterNames, mConverterLabels),
S.TieChoice(_("Real-time dither:"),
wxT("/Quality/DitherAlgorithm"),
Dither::none, mmDitherNames, mmDitherLabels );
S.TieChoice(_("High-quality dither:"),
wxT("/Quality/HQDitherAlgorithm"),
Dither::shaped, mmDitherNames, mmDitherLabels );
#endif
S.EndTwoColumn();
}
S.EndStatic();
// The new style of layout has
// - columns for converter and dither.
// - rows for Real-time and High-quality.
#ifndef OLD_STYLE_LAYOUT
S.StartStatic( _("Conversion") );
{
// We use blank labels here and there to end up with
// a three column layout.
S.StartMultiColumn(3);
S.AddFixedText(wxT(""));
S.AddTitle(_("Sample Rate Converter" ));
S.AddTitle(_("Dither"));
S.TieChoice(_("Real-time:"),
wxT("/Quality/LibresampleSampleRateConverter"),
(int)0, mConverterNames, mConverterLabels),
S.TieChoice(wxT(""),
wxT("/Quality/DitherAlgorithm"),
Dither::none, mmDitherNames, mmDitherLabels );
S.TieChoice(_("High-quality:"),
wxT("/Quality/LibresampleHQSampleRateConverter"),
(int)1, mConverterNames, mConverterLabels),
S.TieChoice(wxT(""),
wxT("/Quality/HQDitherAlgorithm"),
Dither::shaped, mmDitherNames, mmDitherLabels );
S.EndMultiColumn();
}
S.EndStatic();
#endif
}
void BassTrebleDialog::PopulateOrExchange(ShuttleGui & S)
{
S.StartStatic(wxT(""));
{
S.StartMultiColumn(3, wxEXPAND);
S.SetStretchyCol(2);
{
#ifdef __WXGTK__
// BoxSizer is to make first mnemonic work, on Linux.
wxPanel* cPanel = new wxPanel( this, wxID_ANY );
wxBoxSizer* cSizer = new wxBoxSizer(wxVERTICAL);
cPanel->SetSizer(cSizer);
#endif
wxTextValidator vld(wxFILTER_NUMERIC);
// Bass control
mBassT = S.Id(ID_BASS_TEXT).AddTextBox(_("&Bass (dB):"), wxT(""), 10);
mBassT->SetName(_("Bass (dB):"));
mBassT->SetValidator(vld);
S.SetStyle(wxSL_HORIZONTAL);
mBassS = S.Id(ID_BASS_SLIDER).AddSlider(wxT(""), 0, BASS_MAX, BASS_MIN);
mBassS->SetName(_("Bass"));
mBassS->SetRange(BASS_MIN, BASS_MAX);
mBassS->SetPageSize(30);
// Treble control
mTrebleT = S.Id(ID_TREBLE_TEXT).AddTextBox(_("&Treble (dB):"), wxT(""), 10);
mTrebleT->SetValidator(vld);
S.SetStyle(wxSL_HORIZONTAL);
mTrebleS = S.Id(ID_TREBLE_SLIDER).AddSlider(wxT(""), 0, TREBLE_MAX, TREBLE_MIN);
mTrebleS->SetName(_("Treble"));
mTrebleS->SetRange(TREBLE_MIN, TREBLE_MAX);
mTrebleS->SetPageSize(30);
// Level control
mLevelT = S.Id(ID_LEVEL_TEXT).AddTextBox(_("&Level (dB):"), wxT(""), 10);
mLevelT->SetValidator(vld);
S.SetStyle(wxSL_HORIZONTAL);
mLevelS = S.Id(ID_LEVEL_SLIDER).AddSlider(wxT(""), 0, LEVEL_MAX, LEVEL_MIN);
mLevelS->SetName(_("Level"));
mLevelS->SetRange(LEVEL_MIN, LEVEL_MAX);
mLevelS->SetPageSize(30);
}
S.EndMultiColumn();
}
S.EndStatic();
// Normalize checkbox
S.StartHorizontalLay(wxLEFT, true);
{
mNormalizeCheckBox = S.Id(ID_NORMALIZE).AddCheckBox(_("&Enable level control"),
mbNormalize ? wxT("true") : wxT("false"));
mWarning = S.AddVariableText( wxT(""), false,
wxALIGN_CENTER_VERTICAL | wxALIGN_LEFT);
}
S.EndHorizontalLay();
}
void TagsEditor::PopulateOrExchange(ShuttleGui & S)
{
bool bShow;
gPrefs->Read(wxT("/AudioFiles/ShowId3Dialog"), &bShow, true );
S.StartVerticalLay();
{
S.StartHorizontalLay(wxALIGN_LEFT, 0);
{
S.AddUnits(_("Use arrow keys (or ENTER key after editing) to navigate fields."));
}
S.EndHorizontalLay();
if (mGrid == NULL) {
mGrid = safenew Grid(S.GetParent(),
wxID_ANY,
wxDefaultPosition,
wxDefaultSize,
wxSUNKEN_BORDER);
mGrid->RegisterDataType(wxT("Combo"),
(mStringRenderer = safenew wxGridCellStringRenderer),
(mComboEditor = safenew ComboEditor(wxArrayString(), true)));
mGrid->SetColLabelSize(mGrid->GetDefaultRowSize());
auto cs = names();
// Build the initial (empty) grid
mGrid->CreateGrid(0, 2);
mGrid->SetRowLabelSize(0);
mGrid->SetDefaultCellAlignment(wxALIGN_LEFT, wxALIGN_CENTER);
mGrid->SetColLabelValue(0, _("Tag"));
mGrid->SetColLabelValue(1, _("Value"));
// Resize the name column and set default row height.
wxComboBox tc(this, wxID_ANY, wxT(""), wxDefaultPosition, wxDefaultSize, cs);
mGrid->SetColSize(0, tc.GetSize().x);
mGrid->SetColMinimalWidth(0, tc.GetSize().x);
}
S.Prop(1);
S.AddWindow(mGrid, wxEXPAND | wxALL);
S.StartMultiColumn(4, wxALIGN_CENTER);
{
S.Id(AddID).AddButton(_("&Add"));
S.Id(RemoveID).AddButton(_("&Remove"));
S.AddTitle( {} );
S.Id(ClearID).AddButton(_("Cl&ear"));
}
S.EndMultiColumn();
S.StartHorizontalLay(wxALIGN_CENTRE, 0);
{
S.StartStatic(_("Genres"));
{
S.StartMultiColumn(4, wxALIGN_CENTER);
{
S.Id(EditID).AddButton(_("E&dit..."));
S.Id(ResetID).AddButton(_("Rese&t..."));
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Template"));
{
S.StartMultiColumn(4, wxALIGN_CENTER);
{
S.Id(LoadID).AddButton(_("&Load..."));
S.Id(SaveID).AddButton(_("&Save..."));
S.AddTitle( {} );
S.Id(SaveDefaultsID).AddButton(_("Set De&fault"));
}
S.EndMultiColumn();
}
S.EndStatic();
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxALIGN_LEFT, 0);
{
S.Id( DontShowID ).AddCheckBox( _("Don't show this when exporting audio"), !bShow );
}
S.EndHorizontalLay();
}
S.EndVerticalLay();
S.AddStandardButtons(eOkButton | eCancelButton | eHelpButton);
}
