void GUIPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("Display"));
{
S.TieCheckBox(_("&Ergonomic order of Transport Toolbar buttons"),
wxT("/GUI/ErgonomicTransportButtons"),
true);
S.TieCheckBox(_("S&how 'How to Get Help' dialog box at program start up"),
wxT("/GUI/ShowSplashScreen"),
true);
S.AddSpace(10);
S.StartMultiColumn(2);
{
const wxString defaultRange = wxString::Format(wxT("%d"), ENV_DB_RANGE);
S.TieChoice(_("Meter dB &range:"),
ENV_DB_KEY,
defaultRange,
mRangeChoices,
mRangeCodes);
S.SetSizeHints(mRangeChoices);
S.TieChoice(_("&Language:"),
wxT("/Locale/Language"),
wxT(""),
mLangNames,
mLangCodes);
S.SetSizeHints(mLangNames);
S.TieChoice(_("Location of &Manual:"),
wxT("/GUI/Help"),
wxT("Local"),
mHtmlHelpChoices,
mHtmlHelpCodes);
S.SetSizeHints(mHtmlHelpChoices);
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Behaviors"));
{
S.TieCheckBox(_("&Beep on completion of longer activities"),
wxT("/GUI/BeepOnCompletion"),
false);
S.TieCheckBox(_("Re&tain labels if selection snaps to a label edge"),
wxT("/GUI/RetainLabels"),
false);
#ifdef EXPERIMENTAL_OUTPUT_DISPLAY
S.TieCheckBox(_("&Display a mono channel as virtual stereo"),
wxT("/GUI/MonoAsVirtualStereo"),
false);
#endif
}
S.EndStatic();
}
void TruncSilenceDialog::PopulateOrExchange(ShuttleGui & S)
{
S.AddSpace(0, 5);
S.StartHorizontalLay();
{
// Action choices
wxArrayString processChoices;
processChoices.Add(_("Truncate Detected Silence"));
processChoices.Add(_("Compress Excess Silence"));
S.Id(ID_PROCESS_CHOICE).TieChoice(wxT(""),
mEffect->mProcessIndex,
&processChoices);
S.SetSizeHints(-1, -1);
}
S.EndHorizontalLay();
S.StartStatic(_("Detect Silence"));
{
S.StartMultiColumn(3, wxALIGN_CENTER_HORIZONTAL);
{
// Threshold
wxArrayString choices(Enums::NumDbChoices, Enums::GetDbChoices());
S.TieChoice(_("Level:"),
mEffect->mTruncDbChoiceIndex,
&choices);
S.SetSizeHints(-1, -1);
S.AddSpace(0); // 'choices' aleady includes units.
// Ignored silence
S.Id(ID_DETECT_SILENCE).TieNumericTextBox(_("Duration:"),
mEffect->mInitialAllowedSilence,
12);
S.AddUnits(wxT("seconds"));
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartMultiColumn(3, wxALIGN_CENTER_HORIZONTAL);
{
// Truncation / Compression factor
S.Id( ID_TRUNCATION_DURATION ).TieNumericTextBox(_("Truncate to:"),
mEffect->mTruncLongestAllowedSilence,
12);
S.AddUnits(wxT("seconds"));
S.Id( ID_COMPRESS_FACTOR ).TieNumericTextBox(_("Compress to:"),
mEffect->mSilenceCompressPercent,
12);
S.AddUnits(wxT("percent"));
}
S.EndMultiColumn();
// Warnings
pWarning = S.AddVariableText( wxT("") );
UpdateUI();
}
/// Populates more complex dialog that has a chirp.
void ToneGenDialog::PopulateOrExchangeExtended( ShuttleGui & S )
{
S.StartMultiColumn(2, wxCENTER);
{
S.TieChoice( _("Waveform:"), waveform, waveforms);
S.SetSizeHints(-1,-1);
}
S.EndMultiColumn();
S.StartMultiColumn(3, wxCENTER);
{
S.AddFixedText(wxT(""));
S.AddTitle( _("Start"));
S.AddTitle( _("End") );
S.TieTextBox( _("Frequency / Hz"),frequency[0], 10);
S.TieTextBox( wxT(""),frequency[1], 10);
S.TieTextBox( _("Amplitude (0-1)"),amplitude[0], 10);
S.TieTextBox( wxT(""),amplitude[1], 10);
}
S.EndMultiColumn();
S.StartMultiColumn(2, wxCENTER);
{
S.TieTextBox( _("Length (seconds)"),length, 10 );
}
S.EndMultiColumn();
}
void NoiseDialog::PopulateOrExchange( ShuttleGui & S )
{
S.StartMultiColumn(2, wxCENTER);
{
S.AddFixedText(_("Duration"), false);
if (mNoiseDurationT == NULL)
{
mNoiseDurationT = new
TimeTextCtrl(this,
wxID_ANY,
wxT(""),
nDuration,
44100,
wxDefaultPosition,
wxDefaultSize,
true);
/* use this instead of "seconds" because if a selection is passed to
* the effect, I want it (nDuration) to be used as the duration, and
* with "seconds" this does not always work properly. For example,
* it rounds down to zero... */
mNoiseDurationT->SetFormatString(mNoiseDurationT->GetBuiltinFormat(nIsSelection==true?(wxT("hh:mm:ss + samples")):(wxT("seconds"))));
mNoiseDurationT->EnableMenu();
}
S.AddWindow(mNoiseDurationT);
S.TieTextBox(_("Amplitude (0-1)"), nAmplitude, 10);
S.TieChoice(_("Noise type"), nType, nTypeList);
S.SetSizeHints(-1, -1);
}
S.EndMultiColumn();
}
/// Populates simple dialog that has a single tone.
void ToneGenDialog::PopulateOrExchangeStandard( ShuttleGui & S )
{
S.StartMultiColumn(2, wxCENTER);
{
S.TieChoice(_("Waveform") + wxString(wxT(":")), waveform, waveforms);
S.SetSizeHints(-1, -1);
// The added colon to improve visual consistency was placed outside
// the translatable strings to avoid breaking translations close to 2.0.
// TODO: Make colon part of the translatable string after 2.0.
S.TieNumericTextBox(_("Frequency (Hz)") + wxString(wxT(":")), frequency[0], 5);
S.TieNumericTextBox(_("Amplitude (0-1)") + wxString(wxT(":")), amplitude[0], 5);
S.AddPrompt(_("Duration") + wxString(wxT(":")));
if (mToneDurationT == NULL)
{
mToneDurationT = new
TimeTextCtrl(this,
wxID_ANY,
wxT(""),
mDuration,
mEffect->mProjectRate,
wxDefaultPosition,
wxDefaultSize,
true);
mToneDurationT->SetName(_("Duration"));
mToneDurationT->SetFormatString(mToneDurationT->GetBuiltinFormat(isSelection==true?(_("hh:mm:ss + samples")):(_("seconds"))));
mToneDurationT->EnableMenu();
}
S.AddWindow(mToneDurationT);
}
S.EndMultiColumn();
}
void EffectDtmf::PopulateOrExchange(ShuttleGui & S)
{
// dialog will be passed values from effect
// Effect retrieves values from saved config
// Dialog will take care of using them to initialize controls
// If there is a selection, use that duration, otherwise use
// value from saved config: this is useful is user wants to
// replace selection with dtmf sequence
S.AddSpace(0, 5);
S.StartMultiColumn(2, wxCENTER);
{
wxTextValidator vldDtmf(wxFILTER_INCLUDE_CHAR_LIST, &dtmfSequence);
vldDtmf.SetIncludes(wxArrayString(WXSIZEOF(kSymbols), kSymbols));
mDtmfSequenceT = S.Id(ID_Sequence).AddTextBox(_("DTMF sequence:"), wxT(""), 10);
mDtmfSequenceT->SetValidator(vldDtmf);
FloatingPointValidator<double> vldAmp(3, &dtmfAmplitude, NUM_VAL_NO_TRAILING_ZEROES);
vldAmp.SetRange(MIN_Amplitude, MAX_Amplitude);
S.Id(ID_Amplitude).AddTextBox(_("Amplitude (0-1):"), wxT(""), 10)->SetValidator(vldAmp);
S.AddPrompt(_("Duration:"));
mDtmfDurationT = safenew
NumericTextCtrl(NumericConverter::TIME,
S.GetParent(),
ID_Duration,
GetDurationFormat(),
GetDuration(),
mProjectRate,
wxDefaultPosition,
wxDefaultSize,
true);
mDtmfDurationT->SetName(_("Duration"));
mDtmfDurationT->EnableMenu();
S.AddWindow(mDtmfDurationT);
S.AddFixedText(_("Tone/silence ratio:"), false);
S.SetStyle(wxSL_HORIZONTAL | wxEXPAND);
mDtmfDutyCycleS = S.Id(ID_DutyCycle).AddSlider( {},
dtmfDutyCycle * SCL_DutyCycle,
MAX_DutyCycle * SCL_DutyCycle,
MIN_DutyCycle * SCL_DutyCycle);
S.SetSizeHints(-1,-1);
}
S.EndMultiColumn();
S.StartMultiColumn(2, wxCENTER);
{
S.AddFixedText(_("Duty cycle:"), false);
mDtmfDutyT = S.AddVariableText(wxString::Format(wxT("%.1f %%"), dtmfDutyCycle), false);
S.AddFixedText(_("Tone duration:"), false);
mDtmfSilenceT = S.AddVariableText(wxString::Format(wxString(wxT("%.0f ")) + _("ms"), dtmfTone * 1000.0), false);
S.AddFixedText(_("Silence duration:"), false);
mDtmfToneT = S.AddVariableText(wxString::Format(wxString(wxT("%0.f ")) + _("ms"), dtmfSilence * 1000.0), false);
}
S.EndMultiColumn();
}
void DtmfDialog::PopulateOrExchange( ShuttleGui & S )
{
wxTextValidator vldDtmf(wxFILTER_INCLUDE_CHAR_LIST);
vldDtmf.SetIncludes(wxArrayString(42, dtmfSymbols));
S.AddTitle(_("by Salvo Ventura"));
S.StartMultiColumn(2, wxEXPAND);
{
mDtmfStringT = S.Id(ID_DTMF_STRING_TEXT).AddTextBox(_("DTMF sequence:"), wxT(""), 10);
mDtmfStringT->SetValidator(vldDtmf);
// The added colon to improve visual consistency was placed outside
// the translatable strings to avoid breaking translations close to 2.0.
// TODO: Make colon part of the translatable string after 2.0.
S.TieNumericTextBox(_("Amplitude (0-1)") + wxString(wxT(":")), dAmplitude, 10);
S.AddPrompt(_("Duration:"));
if (mDtmfDurationT == NULL)
{
mDtmfDurationT = new
TimeTextCtrl(this,
ID_DTMF_DURATION_TEXT,
wxT(""),
dDuration,
mEffect->mProjectRate,
wxDefaultPosition,
wxDefaultSize,
true);
/* use this instead of "seconds" because if a selection is passed to the
* effect, I want it (dDuration) to be used as the duration, and with
* "seconds" this does not always work properly. For example, it rounds
* down to zero... */
mDtmfDurationT->SetName(_("Duration"));
mDtmfDurationT->SetFormatString(mDtmfDurationT->GetBuiltinFormat(dIsSelection==true?(_("hh:mm:ss + samples")):(_("hh:mm:ss + milliseconds"))));
mDtmfDurationT->EnableMenu();
}
S.AddWindow(mDtmfDurationT);
S.AddFixedText(_("Tone/silence ratio:"), false);
S.SetStyle(wxSL_HORIZONTAL | wxEXPAND);
mDtmfDutyS = S.Id(ID_DTMF_DUTYCYCLE_SLIDER).AddSlider(wxT(""), (int)dDutyCycle, DUTY_MAX, DUTY_MIN);
S.SetSizeHints(-1,-1);
}
S.EndMultiColumn();
S.StartMultiColumn(2, wxCENTER);
{
S.AddFixedText(_("Duty cycle:"), false);
mDtmfDutyT = S.Id(ID_DTMF_DUTYCYCLE_TEXT).AddVariableText(wxString::Format(wxT("%.1f %%"), (float) dDutyCycle/DUTY_SCALE), false);
S.AddFixedText(_("Tone duration:"), false);
mDtmfSilenceT = S.Id(ID_DTMF_TONELEN_TEXT).AddVariableText(wxString::Format(wxString(wxT("%d ")) + _("ms"), (int) dTone * 1000), false);
S.AddFixedText(_("Silence duration:"), false);
mDtmfToneT = S.Id(ID_DTMF_SILENCE_TEXT).AddVariableText(wxString::Format(wxString(wxT("%d ")) + _("ms"), (int) dSilence * 1000), false);
}
S.EndMultiColumn();
}
void MidiIOPrefs::PopulateOrExchange( ShuttleGui & S ) {
wxArrayString empty;
S.SetBorder(2);
S.StartStatic(_("Interface"));
{
S.StartMultiColumn(2);
{
S.Id(HostID);
mHost = S.TieChoice(_("Host") + wxString(wxT(":")),
wxT("/MidiIO/Host"),
wxT(""),
mHostNames,
mHostLabels);
S.SetSizeHints(mHostNames);
S.AddPrompt(_("Using:"));
S.AddFixedText(wxString(Pa_GetVersionText(), wxConvLocal));
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Playback"));
{
S.StartMultiColumn(2);
{
S.Id(PlayID);
mPlay = S.AddChoice(_("Device") + wxString(wxT(":")),
wxEmptyString,
&empty);
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Recording"));
{
S.StartMultiColumn(2);
{
S.Id(RecordID);
mRecord = S.AddChoice(_("Device") + wxString(wxT(":")),
wxEmptyString,
&empty);
S.Id(ChannelsID);
/*
mChannels = S.AddChoice(_("Channels") + wxString(wxT(":")),
wxEmptyString,
&empty);
*/
}
S.EndMultiColumn();
}
S.EndStatic();
}
/// Populates simple dialog that has a single tone.
void ToneGenDialog::PopulateOrExchangeStandard( ShuttleGui & S )
{
S.StartMultiColumn(2, wxCENTER);
{
S.TieChoice( _("Waveform:"), waveform, waveforms);
S.SetSizeHints(-1,-1);
S.TieTextBox( _("Frequency / Hz"),frequency[0], 5);
S.TieTextBox( _("Amplitude (0-1)"),amplitude[0], 5);
S.TieTextBox( _("Length (seconds)"),length, 5 );
}
S.EndMultiColumn();
}
void TracksBehaviorsPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartScroller();
S.StartStatic(_("Behaviors"));
{
S.TieCheckBox(_("A&uto-select, if selection required"),
wxT("/GUI/SelectAllOnNone"),
false);
/* i18n-hint: Cut-lines are lines that can expand to show the cut audio.*/
S.TieCheckBox(_("Enable cut &lines"),
wxT("/GUI/EnableCutLines"),
false);
S.TieCheckBox(_("Enable &dragging selection edges"),
wxT("/GUI/AdjustSelectionEdges"),
true);
S.TieCheckBox(_("Editing a clip can &move other clips"),
wxT("/GUI/EditClipCanMove"),
true);
S.TieCheckBox(_("\"Move track focus\" c&ycles repeatedly through tracks"),
wxT("/GUI/CircularTrackNavigation"),
false);
S.TieCheckBox(_("&Type to create a label"),
wxT("/GUI/TypeToCreateLabel"),
true);
#ifdef EXPERIMENTAL_SCROLLING_LIMITS
S.TieCheckBox(_("Enable scrolling left of &zero"),
ScrollingPreferenceKey(),
ScrollingPreferenceDefault());
#endif
S.TieCheckBox(_("Advanced &vertical zooming"),
wxT("/GUI/VerticalZooming"),
false);
S.AddSpace(10);
S.StartMultiColumn(2);
{
S.TieChoice(_("Solo &Button:"),
wxT("/GUI/Solo"),
wxT("Standard"),
mSoloChoices,
mSoloCodes);
S.SetSizeHints(mSoloChoices);
}
S.EndMultiColumn();
}
S.EndStatic();
S.EndScroller();
}
void DtmfDialog::PopulateOrExchange( ShuttleGui & S )
{
wxTextValidator vldDtmf(wxFILTER_INCLUDE_CHAR_LIST);
vldDtmf.SetIncludes(wxArrayString(20, dtmfSymbols));
S.AddTitle(_("by Salvo Ventura (2006)"));
S.StartMultiColumn(2, wxEXPAND);
{
mDtmfStringT = S.Id(ID_DTMF_STRING_TEXT).AddTextBox(_("DTMF sequence:"), wxT(""), 10);
mDtmfStringT->SetValidator(vldDtmf);
S.AddPrompt(_("DTMF duration:"));
mDtmfDurationT = new
TimeTextCtrl(this,
ID_DTMF_DURATION_TEXT,
/*
use this instead of "seconds" because if a selection is passed to the effect,
I want it (dDuration) to be used as the duration, and with "seconds" this does
not always work properly. For example, it rounds down to zero...
*/
TimeTextCtrl::GetBuiltinFormat(dIsSelection==true?(wxT("hh:mm:ss + samples")):(wxT("seconds"))),
dDuration,
44100,
wxDefaultPosition,
wxDefaultSize,
true);
S.AddWindow(mDtmfDurationT);
mDtmfDurationT->EnableMenu();
S.AddFixedText(_("Tone/silence ratio:"), false);
S.SetStyle(wxSL_HORIZONTAL | wxEXPAND);
mDtmfDutyS = S.Id(ID_DTMF_DUTYCYCLE_SLIDER).AddSlider(wxT(""), (int)dDutyCycle, DUTY_MAX);
mDtmfDutyS->SetRange(DUTY_MIN, DUTY_MAX);
S.SetSizeHints(-1,-1);
}
S.EndMultiColumn();
S.StartMultiColumn(2, wxCENTER);
{
S.AddFixedText(_("Duty cycle:"), false);
mDtmfDutyT = S.Id(ID_DTMF_DUTYCYCLE_TEXT).AddVariableText(wxString::Format(wxT("%.1f %%"), (float) dDutyCycle/DUTY_SCALE), false);
S.AddFixedText(_("Tone duration:"), false);
mDtmfSilenceT = S.Id(ID_DTMF_TONELEN_TEXT).AddVariableText(wxString::Format(wxString(wxT("%d ")) + _("ms"), (int) dTone * 1000), false);
S.AddFixedText(_("Silence duration:"), false);
mDtmfToneT = S.Id(ID_DTMF_SILENCE_TEXT).AddVariableText(wxString::Format(wxString(wxT("%d ")) + _("ms"), (int) dSilence * 1000), false);
}
S.EndMultiColumn();
}
void WaveformPrefs::PopulateOrExchange(ShuttleGui & S)
{
mPopulating = true;
S.SetBorder(2);
// S.StartStatic(_("Track Settings"));
{
mDefaultsCheckbox = 0;
if (mWt) {
/* i18n-hint: use is a verb */
mDefaultsCheckbox = S.Id(ID_DEFAULTS).TieCheckBox(_("&Use Preferences"), mDefaulted);
}
S.StartStatic(_("Display"));
{
S.StartTwoColumn();
{
mScaleChoice =
S.Id(ID_SCALE).TieChoice(_("S&cale") + wxString(wxT(":")),
*(int*)&mTempSettings.scaleType,
&mScaleChoices);
mRangeChoice =
S.Id(ID_RANGE).TieChoice(_("Waveform dB &range") + wxString(wxT(":")),
*(int*)&mTempSettings.dBRange,
&mRangeChoices);
S.SetSizeHints(mRangeChoices);
}
S.EndTwoColumn();
}
S.EndStatic();
}
// S.EndStatic();
/*
S.StartStatic(_("Global settings"));
{
}
S.EndStatic();
*/
EnableDisableRange();
mPopulating = false;
}
void SpectrumPrefs::PopulateOrExchange( ShuttleGui & S )
{
wxArrayString windowTypeList;
for(int i=0; i<NumWindowFuncs(); i++)
windowTypeList.Add(WindowFuncName(i));
S.SetBorder( 2 );
S.StartHorizontalLay(wxEXPAND, 0 );
S.StartStatic( _("FFT Size"), 0 );
{
S.StartRadioButtonGroup( wxT("/Spectrum/FFTSize"), 256 );
S.TieRadioButton( _("8 - most wideband"), 8);
S.TieRadioButton( wxT("16"), 16);
S.TieRadioButton( wxT("32"), 32);
S.TieRadioButton( wxT("64"), 64);
S.TieRadioButton( wxT("128"), 128);
S.TieRadioButton( _("256 - default"), 256);
S.TieRadioButton( wxT("512"), 512);
S.TieRadioButton( wxT("1024"), 1024);
S.TieRadioButton( wxT("2048"), 2048);
#ifdef EXPERIMENTAL_FIND_NOTES
S.TieRadioButton( wxT("4096"), 4096);
S.TieRadioButton( wxT("8192"), 8192);
S.TieRadioButton( wxT("16384"), 16384);
S.TieRadioButton( _("32768 - most narrowband"),32768);
#else
S.TieRadioButton( _("4096 - most narrowband"),4096);
#endif //LOGARITHMIC_SPECTRUM
S.EndRadioButtonGroup();
// add choice for windowtype
S.StartMultiColumn(2, wxCENTER);
{
S.TieChoice( _("Window type:"), windowType, &windowTypeList);
S.SetSizeHints(-1,-1);
}
S.EndMultiColumn();
}
S.EndStatic();
#ifdef EXPERIMENTAL_FFT_SKIP_POINTS
S.StartHorizontalLay(wxEXPAND, 0 );
S.StartStatic( _("FFT Skip Points"), 0 );
{
S.StartRadioButtonGroup(wxT("/Spectrum/FFTSkipPoints"), 0);
S.TieRadioButton(wxT("0"), 0);
S.TieRadioButton(wxT("1"), 1);
S.TieRadioButton(wxT("3"), 3);
S.TieRadioButton(wxT("7"), 7);
S.TieRadioButton(wxT("15"), 15);
S.TieRadioButton(wxT("31"), 31);
S.TieRadioButton(wxT("63"), 63);
S.EndRadioButtonGroup();
}
S.EndStatic();
#endif //EXPERIMENTAL_FFT_SKIP_POINTS
S.StartStatic( _("Display"),1 );
{
// JC: For layout of mixtures of controls I prefer checkboxes on the right,
// with everything in two columns over what we have here.
S.TieCheckBox( _("&Grayscale"), wxT("/Spectrum/Grayscale"), false);
S.StartTwoColumn(); // 2 cols because we have a control with a separate label.
S.Id(ID_MINFREQUENCY).TieTextBox(
_("Minimum Frequency (Hz):"), // prompt
minFreqStr, // String to exchange with
12 // max number of characters (used to size the control).
);
S.Id(ID_MAXFREQUENCY).TieTextBox(
_("Maximum Frequency (Hz):"), // prompt
maxFreqStr, // String to exchange with
12 // max number of characters (used to size the control).
);
S.EndTwoColumn();
#ifdef EXPERIMENTAL_FFT_Y_GRID
S.TieCheckBox( _("&Y-Grid"), wxT("/Spectrum/FFTYGrid"), false);
#endif //EXPERIMENTAL_FFT_Y_GRID
#ifdef EXPERIMENTAL_FIND_NOTES
S.TieCheckBox( _("&Find Notes"), wxT("/Spectrum/FFTFindNotes"), false);
S.TieCheckBox( _("&Quantize Notes"), wxT("/Spectrum/FindNotesQuantize"), false);
S.StartTwoColumn(); // 2 cols because we have a control with a separate label.
S.Id(ID_FIND_NOTES_MIN_A).TieTextBox(
_("Minimum Amplitude (dB):"), // prompt
findNotesMinAStr, // String to exchange with
8 // max number of characters (used to size the control).
);
S.Id(ID_FIND_NOTES_N).TieTextBox(
_("Max. Number of Notes (1..128):"), // prompt
findNotesNStr, // String to exchange with
8 // max number of characters (used to size the control).
);
S.EndTwoColumn();
#endif //EXPERIMENTAL_FIND_NOTES
}
S.EndStatic();
S.EndHorizontalLay();
}
void QualityPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("Sampling"));
{
S.StartMultiColumn(2);
{
S.AddPrompt(_("Default Sample &Rate:"));
S.StartMultiColumn(2);
{
// If the value in Prefs isn't in the list, then we want
// the last item, 'Other...' to be shown.
S.SetNoMatchSelector(mSampleRateNames.GetCount() - 1);
// First the choice...
// We make sure it uses the ID we want, so that we get changes
S.Id(ID_SAMPLE_RATE_CHOICE);
// We make sure we have a pointer to it, so that we can drive it.
mSampleRates = S.TieChoice(wxT(""),
wxT("/SamplingRate/DefaultProjectSampleRate"),
AudioIO::GetOptimalSupportedSampleRate(),
mSampleRateNames,
mSampleRateLabels);
S.SetSizeHints(mSampleRateNames);
// Now do the edit box...
mOtherSampleRate = S.TieNumericTextBox(wxT(""),
mOtherSampleRateValue,
15);
}
S.EndHorizontalLay();
S.TieChoice(_("Default Sample &Format:"),
wxT("/SamplingRate/DefaultProjectSampleFormat"),
floatSample,
mSampleFormatNames,
mSampleFormatLabels);
S.SetSizeHints(mSampleFormatNames);
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Real-time Conversion"));
{
S.StartMultiColumn(2, wxEXPAND);
{
S.SetStretchyCol(2);
S.TieChoice(_("Sample Rate Con&verter:"),
Resample::GetFastMethodKey(),
Resample::GetFastMethodDefault(),
mConverterNames,
mConverterLabels),
S.SetSizeHints(mConverterNames);
S.TieChoice(_("&Dither:"),
wxT("/Quality/DitherAlgorithm"),
Dither::none,
mDitherNames,
mDitherLabels);
S.SetSizeHints(mDitherNames);
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("High-quality Conversion"));
{
S.StartMultiColumn(2);
{
S.TieChoice(_("Sample Rate Conver&ter:"),
Resample::GetBestMethodKey(),
Resample::GetBestMethodDefault(),
mConverterNames,
mConverterLabels),
S.SetSizeHints(mConverterNames);
S.TieChoice(_("Dit&her:"),
wxT("/Quality/HQDitherAlgorithm"),
Dither::shaped,
mDitherNames,
mDitherLabels);
S.SetSizeHints(mDitherNames);
}
S.EndMultiColumn();
}
S.EndStatic();
}
void MidiIOPrefs::PopulateOrExchange( ShuttleGui & S ) {
wxArrayString empty;
S.SetBorder(2);
S.StartStatic(_("Interface"));
{
S.StartMultiColumn(2);
{
S.Id(HostID);
/* i18n-hint: (noun) */
mHost = S.TieChoice(_("Host") + wxString(wxT(":")),
wxT("/MidiIO/Host"),
wxT(""),
mHostNames,
mHostLabels);
S.SetSizeHints(mHostNames);
S.AddPrompt(_("Using: PortMidi"));
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Playback"));
{
S.StartMultiColumn(2);
{
S.Id(PlayID);
mPlay = S.AddChoice(_("Device") + wxString(wxT(":")),
wxEmptyString,
&empty);
int latency = gPrefs->Read(wxT("/MidiIO/OutputLatency"),
DEFAULT_SYNTH_LATENCY);
mLatency = S.TieNumericTextBox(_("MIDI Synthesizer Latency (ms):"),
wxT("/MidiIO/SynthLatency"),
latency, 3);
}
S.EndMultiColumn();
}
S.EndStatic();
#ifdef EXPERIMENTAL_MIDI_IN
S.StartStatic(_("Recording"));
{
S.StartMultiColumn(2);
{
S.Id(RecordID);
mRecord = S.AddChoice(_("Device") + wxString(wxT(":")),
wxEmptyString,
&empty);
S.Id(ChannelsID);
/*
mChannels = S.AddChoice(_("Channels") + wxString(wxT(":")),
wxEmptyString,
&empty);
*/
}
S.EndMultiColumn();
}
S.EndStatic();
#endif
}
void SpectrumPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("FFT Window"));
{
S.StartMultiColumn(2);
{
S.TieChoice(_("Window size") + wxString(wxT(":")),
wxT("/Spectrum/FFTSize"),
256,
mSizeChoices,
mSizeCodes);
S.SetSizeHints(mSizeChoices);
S.TieChoice(_("Window type") + wxString(wxT(":")),
wxT("/Spectrum/WindowType"),
3,
mTypeChoices,
mTypeCodes);
S.SetSizeHints(mTypeChoices);
}
S.EndMultiColumn();
}
S.EndStatic();
#ifdef EXPERIMENTAL_FFT_SKIP_POINTS
wxArrayString wskipn;
wxArrayInt wskipv;
for (size_t i = 0; i < 7; i++) {
wskipn.Add(wxString::Format(wxT("%d"), (1 << i) - 1));
wskipv.Add((1 << i) - 1);
}
S.StartStatic(_("FFT Skip Points"));
{
S.StartMultiColumn(2);
{
S.TieChoice(_("Skip Points") + wxString(wxT(":")),
wxT("/Spectrum/FFTSkipPoints"),
0,
wskipn,
wskipv);
S.SetSizeHints(wskipn);
}
S.EndMultiColumn();
}
S.EndStatic();
#endif //EXPERIMENTAL_FFT_SKIP_POINTS
S.StartStatic(_("Display"));
{
S.StartTwoColumn();
{
mMinFreq =
S.TieTextBox(_("Minimum Frequency (Hz):"),
wxT("/Spectrum/MinFreq"),
0,
12);
mMaxFreq =
S.TieTextBox(_("Maximum Frequency (Hz):"),
wxT("/Spectrum/MaxFreq"),
8000,
12);
mGain =
S.TieTextBox(_("Gain (dB):"),
wxT("/Spectrum/Gain"),
20,
8);
mRange =
S.TieTextBox(_("Range (dB):"),
wxT("/Spectrum/Range"),
80,
8);
mFrequencyGain =
S.TieTextBox(_("Frequency gain: (dB/dec)"),
wxT("/Spectrum/FrequencyGain"),
0,
4);
}
S.EndTwoColumn();
S.TieCheckBox(_("Show the spectrum using &grayscale colors"),
wxT("/Spectrum/Grayscale"),
false);
#ifdef EXPERIMENTAL_FFT_Y_GRID
S.TieCheckBox(_("Show a grid along the &Y-axis"),
wxT("/Spectrum/FFTYGrid"),
false);
#endif //EXPERIMENTAL_FFT_Y_GRID
}
S.EndStatic();
#ifdef EXPERIMENTAL_FIND_NOTES
S.StartStatic(_("FFT Find Notes"));
{
S.StartTwoColumn();
{
mFindNotesMinA =
S.TieTextBox(_("Minimum Amplitude (dB):"),
wxT("/Spectrum/FindNotesMinA"),
-30L,
8);
mFindNotesN =
S.TieTextBox(_("Max. Number of Notes (1..128):"),
wxT("/Spectrum/FindNotesN"),
5L,
8);
}
S.EndTwoColumn();
S.TieCheckBox(_("&Find Notes"),
wxT("/Spectrum/FFTFindNotes"),
false);
S.TieCheckBox(_("&Quantize Notes"),
wxT("/Spectrum/FindNotesQuantize"),
false);
}
S.EndStatic();
#endif //EXPERIMENTAL_FIND_NOTES
}
void GUIPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartScroller();
S.StartStatic(_("Display"));
{
S.StartMultiColumn(2);
{
#ifdef EXPERIMENTAL_DA
const wxString defaultTheme = wxT("dark");
#else
const wxString defaultTheme = wxT("light");
#endif
const wxString defaultRange = wxString::Format(wxT("%d"), ENV_DB_RANGE);
S.TieChoice(_("&Language:"),
wxT("/Locale/Language"),
wxT(""),
mLangNames,
mLangCodes);
S.SetSizeHints(mLangNames);
S.TieChoice(_("Location of &Manual:"),
wxT("/GUI/Help"),
wxT("Local"),
mHtmlHelpChoices,
mHtmlHelpCodes);
S.SetSizeHints(mHtmlHelpChoices);
S.TieChoice(_("Th&eme:"),
wxT("/GUI/Theme"),
defaultTheme,
mThemeChoices,
mThemeCodes);
S.SetSizeHints(mThemeChoices);
S.TieChoice(_("Meter dB &range:"),
ENV_DB_KEY,
defaultRange,
mRangeChoices,
mRangeCodes);
S.SetSizeHints(mRangeChoices);
}
S.EndMultiColumn();
// S.AddSpace(10);
// JKC: This is a silly preference. Kept here as a reminder that we may
// later want to have configurable button order.
// S.TieCheckBox(_("&Ergonomic order of Transport Toolbar buttons"),
// wxT("/GUI/ErgonomicTransportButtons"),
// true);
}
S.EndStatic();
S.StartStatic(_("Show"));
{
S.TieCheckBox(_("'How to Get &Help' at launch"),
wxT("/GUI/ShowSplashScreen"),
true);
S.TieCheckBox(_("E&xtra menus"),
wxT("/GUI/ShowExtraMenus"),
false);
#ifdef EXPERIMENTAL_THEME_PREFS
// We do not want to make this option mainstream. It's a
// convenience for developers.
S.TieCheckBox(_("Show alternative &styling (Mac vs PC)"),
wxT("/GUI/ShowMac"),
false);
#endif
}
S.EndStatic();
S.StartStatic(_("Behaviors"));
{
S.TieCheckBox(_("&Beep on completion of longer activities"),
wxT("/GUI/BeepOnCompletion"),
false);
S.TieCheckBox(_("Re&tain labels if selection snaps to a label"),
wxT("/GUI/RetainLabels"),
false);
S.TieCheckBox(_("B&lend system and Audacity theme"),
wxT("/GUI/BlendThemes"),
true);
}
S.EndStatic();
S.EndScroller();
}
void TracksPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("Display"));
{
S.TieCheckBox(_("&Update display while playing"),
wxT("/GUI/AutoScroll"),
true);
S.TieCheckBox(_("Automatically &fit tracks vertically zoomed"),
wxT("/GUI/TracksFitVerticallyZoomed"),
false);
S.AddSpace(10);
S.StartMultiColumn(2);
{
S.TieChoice(_("Default &view mode:"),
wxT("/GUI/DefaultViewModeNew"),
0,
mViewChoices,
mViewCodes);
S.SetSizeHints(mViewChoices);
S.TieTextBox(_("Default audio track &name:"),
wxT("/GUI/TrackNames/DefaultTrackName"),
_("Audio Track"),
30);
}
S.EndMultiColumn();
S.TieCheckBox(_("Sho&w audio track name as overlay"),
wxT("/GUI/ShowTrackNameInWaveform"),
false);
}
S.EndStatic();
S.StartStatic(_("Behaviors"));
{
S.TieCheckBox(_("&Select all audio in project, if none selected"),
wxT("/GUI/SelectAllOnNone"),
true);
/* i18n-hint: cut-lines are a lines indicating where to cut.*/
S.TieCheckBox(_("Enable cu&t lines"),
wxT("/GUI/EnableCutLines"),
false);
S.TieCheckBox(_("Enable &dragging of left and right selection edges"),
wxT("/GUI/AdjustSelectionEdges"),
true);
S.TieCheckBox(_("\"Move track focus\" c&ycles repeatedly through tracks"),
wxT("/GUI/CircularTrackNavigation"),
false);
S.TieCheckBox(_("Editing a clip can &move other clips"),
wxT("/GUI/EditClipCanMove"),
true);
#ifdef EXPERIMENTAL_SCROLLING_LIMITS
S.TieCheckBox(_("Enable scrolling left of &zero"),
wxT("/GUI/ScrollBeyondZero"),
false);
#endif
S.AddSpace(10);
S.StartMultiColumn(2);
{
S.TieChoice(_("Solo &Button:"),
wxT("/GUI/Solo"),
wxT("Standard"),
mSoloChoices,
mSoloCodes);
S.SetSizeHints(mSoloChoices);
}
S.EndMultiColumn();
}
S.EndStatic();
}
void EffectTruncSilence::PopulateOrExchange(ShuttleGui & S)
{
wxASSERT(kNumActions == WXSIZEOF(kActionStrings));
wxArrayString actionChoices;
for (int i = 0; i < kNumActions; i++)
{
actionChoices.Add(wxGetTranslation(kActionStrings[i]));
}
S.AddSpace(0, 5);
S.StartStatic(_("Detect Silence"));
{
S.StartMultiColumn(3, wxALIGN_CENTER_HORIZONTAL);
{
// Threshold
mTruncDbChoice = S.AddChoice(_("Level:"), wxT(""), &mDbChoices);
mTruncDbChoice->SetValidator(wxGenericValidator(&mTruncDbChoiceIndex));
S.SetSizeHints(-1, -1);
S.AddSpace(0); // 'choices' already includes units.
// Ignored silence
FloatingPointValidator<double> vldDur(3, &mInitialAllowedSilence, NUM_VAL_NO_TRAILING_ZEROES);
vldDur.SetRange(MIN_Minimum, MAX_Minimum);
mInitialAllowedSilenceT = S.AddTextBox(_("Duration:"), wxT(""), 12);
mInitialAllowedSilenceT->SetValidator(vldDur);
S.AddUnits(wxT("seconds"));
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Action"));
{
S.StartHorizontalLay();
{
// Action choices
mActionChoice = S.AddChoice(wxT(""), wxT(""), &actionChoices);
mActionChoice->SetValidator(wxGenericValidator(&mActionIndex));
S.SetSizeHints(-1, -1);
}
S.EndHorizontalLay();
S.StartMultiColumn(3, wxALIGN_CENTER_HORIZONTAL);
{
// Truncation / Compression factor
FloatingPointValidator<double> vldTrunc(3, &mTruncLongestAllowedSilence, NUM_VAL_NO_TRAILING_ZEROES);
vldTrunc.SetRange(MIN_Truncate, MAX_Truncate);
mTruncLongestAllowedSilenceT = S.AddTextBox(_("Truncate to:"), wxT(""), 12);
mTruncLongestAllowedSilenceT->SetValidator(vldTrunc);
S.AddUnits(wxT("seconds"));
FloatingPointValidator<double> vldComp(3, &mSilenceCompressPercent, NUM_VAL_NO_TRAILING_ZEROES);
vldComp.SetRange(MIN_Compress, MAX_Compress);
mSilenceCompressPercentT = S.AddTextBox(_("Compress to:"), wxT(""), 12);
mSilenceCompressPercentT->SetValidator(vldComp);
S.AddUnits(wxT("percent"));
}
S.EndMultiColumn();
S.StartMultiColumn(2, wxALIGN_CENTER_HORIZONTAL);
{
mIndependent = S.AddCheckBox(_("Truncate tracks independently"),
mbIndependent ? wxT("true") : wxT("false"));
}
S.EndMultiColumn();
}
S.EndStatic();
UpdateUI();
}
void EffectTruncSilence::PopulateOrExchange(ShuttleGui & S)
{
wxASSERT(nActions == WXSIZEOF(kActionStrings));
S.AddSpace(0, 5);
S.StartStatic(_("Detect Silence"));
{
S.StartMultiColumn(3, wxALIGN_CENTER_HORIZONTAL);
{
// Threshold
FloatingPointValidator<double> vldThreshold(3, &mThresholdDB,
NumValidatorStyle::NO_TRAILING_ZEROES);
vldThreshold.SetRange(MIN_Threshold, MAX_Threshold);
mThresholdText = S.AddTextBox(_("Threshold:"), wxT(""), 0);
mThresholdText->SetValidator(vldThreshold);
S.AddUnits(_("dB"));
// Ignored silence
FloatingPointValidator<double> vldDur(3, &mInitialAllowedSilence, NumValidatorStyle::NO_TRAILING_ZEROES);
vldDur.SetRange(MIN_Minimum, MAX_Minimum);
mInitialAllowedSilenceT = S.AddTextBox(_("Duration:"), wxT(""), 12);
mInitialAllowedSilenceT->SetValidator(vldDur);
S.AddUnits(_("seconds"));
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Action"));
{
S.StartHorizontalLay();
{
// Action choices
auto actionChoices = LocalizedStrings(kActionStrings, nActions);
mActionChoice = S.AddChoice( {}, wxT(""), &actionChoices);
mActionChoice->SetValidator(wxGenericValidator(&mActionIndex));
S.SetSizeHints(-1, -1);
}
S.EndHorizontalLay();
S.StartMultiColumn(3, wxALIGN_CENTER_HORIZONTAL);
{
// Truncation / Compression factor
FloatingPointValidator<double> vldTrunc(3, &mTruncLongestAllowedSilence, NumValidatorStyle::NO_TRAILING_ZEROES);
vldTrunc.SetRange(MIN_Truncate, MAX_Truncate);
mTruncLongestAllowedSilenceT = S.AddTextBox(_("Truncate to:"), wxT(""), 12);
mTruncLongestAllowedSilenceT->SetValidator(vldTrunc);
S.AddUnits(_("seconds"));
FloatingPointValidator<double> vldComp(3, &mSilenceCompressPercent, NumValidatorStyle::NO_TRAILING_ZEROES);
vldComp.SetRange(MIN_Compress, MAX_Compress);
mSilenceCompressPercentT = S.AddTextBox(_("Compress to:"), wxT(""), 12);
mSilenceCompressPercentT->SetValidator(vldComp);
S.AddUnits(_("%"));
}
S.EndMultiColumn();
S.StartMultiColumn(2, wxALIGN_CENTER_HORIZONTAL);
{
mIndependent = S.AddCheckBox(_("Truncate tracks independently"),
mbIndependent ? wxT("true") : wxT("false"));
}
S.EndMultiColumn();
}
S.EndStatic();
UpdateUI();
}
void EffectScienFilter::PopulateOrExchange(ShuttleGui & S)
{
wxWindow *parent = S.GetParent();
S.AddSpace(5);
S.SetSizerProportion(1);
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol(1);
S.SetStretchyRow(0);
// -------------------------------------------------------------------
// ROW 1: Freq response panel and sliders for vertical scale
// -------------------------------------------------------------------
S.StartVerticalLay();
{
mdBRuler = new RulerPanel(parent, wxID_ANY);
mdBRuler->ruler.SetBounds(0, 0, 100, 100); // Ruler can't handle small sizes
mdBRuler->ruler.SetOrientation(wxVERTICAL);
mdBRuler->ruler.SetRange(30.0, -120.0);
mdBRuler->ruler.SetFormat(Ruler::LinearDBFormat);
mdBRuler->ruler.SetUnits(_("dB"));
mdBRuler->ruler.SetLabelEdges(true);
int w;
mdBRuler->ruler.GetMaxSize(&w, NULL);
mdBRuler->SetSize(wxSize(w, 150)); // height needed for wxGTK
S.SetBorder(1);
S.AddSpace(1, 1);
S.Prop(1);
S.AddWindow(mdBRuler, wxALIGN_RIGHT | wxTOP);
S.AddSpace(1, 1);
}
S.EndVerticalLay();
mPanel = new EffectScienFilterPanel(this, parent);
mPanel->SetFreqRange(mLoFreq, mNyquist);
S.SetBorder(5);
S.Prop(1);
S.AddWindow(mPanel, wxEXPAND | wxRIGHT);
S.SetSizeHints(-1, -1);
S.StartVerticalLay();
{
S.AddVariableText(_("+ dB"), false, wxCENTER);
S.SetStyle(wxSL_VERTICAL | wxSL_INVERSE);
mdBMaxSlider = S.Id(ID_dBMax).AddSlider(wxT(""), 10, 20, 0);
#if wxUSE_ACCESSIBILITY
mdBMaxSlider->SetName(_("Max dB"));
mdBMaxSlider->SetAccessible(new SliderAx(mdBMaxSlider, wxString(wxT("%d ")) + _("dB")));
#endif
S.SetStyle(wxSL_VERTICAL | wxSL_INVERSE);
mdBMinSlider = S.Id(ID_dBMin).AddSlider(wxT(""), -10, -10, -120);
S.AddVariableText(_("- dB"), false, wxCENTER);
#if wxUSE_ACCESSIBILITY
mdBMinSlider->SetName(_("Min dB"));
mdBMinSlider->SetAccessible(new SliderAx(mdBMinSlider, wxString(wxT("%d ")) + _("dB")));
#endif
}
S.EndVerticalLay();
// -------------------------------------------------------------------
// ROW 2: Frequency ruler
// -------------------------------------------------------------------
S.AddSpace(1, 1);
mfreqRuler = new RulerPanel(parent, wxID_ANY);
mfreqRuler->ruler.SetBounds(0, 0, 100, 100); // Ruler can't handle small sizes
mfreqRuler->ruler.SetOrientation(wxHORIZONTAL);
mfreqRuler->ruler.SetLog(true);
mfreqRuler->ruler.SetRange(mLoFreq, mNyquist);
mfreqRuler->ruler.SetFormat(Ruler::IntFormat);
mfreqRuler->ruler.SetUnits(wxT(""));
mfreqRuler->ruler.SetFlip(true);
mfreqRuler->ruler.SetLabelEdges(true);
int h;
mfreqRuler->ruler.GetMaxSize(NULL, &h);
mfreqRuler->SetMinSize(wxSize(-1, h));
S.Prop(1);
S.AddWindow(mfreqRuler, wxEXPAND | wxALIGN_LEFT | wxRIGHT);
S.AddSpace(1, 1);
// -------------------------------------------------------------------
// ROW 3 and 4: Type, Order, Ripple, Subtype, Cutoff
// -------------------------------------------------------------------
S.AddSpace(1, 1);
S.SetSizerProportion(0);
S.StartMultiColumn(8, wxALIGN_CENTER);
{
wxASSERT(kNumTypes == WXSIZEOF(kTypeStrings));
wxArrayString typeChoices;
for (int i = 0; i < kNumTypes; i++)
{
typeChoices.Add(wxGetTranslation(kTypeStrings[i]));
}
mFilterTypeCtl = S.Id(ID_Type).AddChoice(_("&Filter Type:"), wxT(""), &typeChoices);
mFilterTypeCtl->SetValidator(wxGenericValidator(&mFilterType));
S.SetSizeHints(-1, -1);
wxArrayString orders;
for (int i = 1; i <= 10; i++)
{
orders.Add(wxString::Format(wxT("%d"), i));
}
/*i18n-hint: 'Order' means the complexity of the filter, and is a number between 1 and 10.*/
mFilterOrderCtl = S.Id(ID_Order).AddChoice(_("O&rder:"), wxT(""), &orders);
mFilterOrderCtl->SetValidator(wxGenericValidator(&mOrderIndex));
S.SetSizeHints(-1, -1);
S.AddSpace(1, 1);
FloatingPointValidator<float> vldRipple(1, &mRipple);
vldRipple.SetRange(MIN_Passband, MAX_Passband);
mRippleCtlP = S.AddVariableText(_("&Passband Ripple:"), false, wxALL | wxALIGN_RIGHT | wxALIGN_CENTER_VERTICAL);
mRippleCtl = S.Id(ID_Ripple).AddTextBox(wxT(""), wxT(""), 10);
mRippleCtl->SetName(_("Passband Ripple (dB)"));
mRippleCtl->SetValidator(vldRipple);
mRippleCtlU = S.AddVariableText(_("dB"), false, wxALL | wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL);
wxASSERT(kNumSubTypes == WXSIZEOF(kSubTypeStrings));
wxArrayString subTypeChoices;
for (int i = 0; i < kNumSubTypes; i++)
{
subTypeChoices.Add(wxGetTranslation(kSubTypeStrings[i]));
}
mFilterSubTypeCtl = S.Id(ID_SubType).AddChoice(_("&Subtype:"), wxT(""), &subTypeChoices);
mFilterSubTypeCtl->SetValidator(wxGenericValidator(&mFilterSubtype));
S.SetSizeHints(-1, -1);
FloatingPointValidator<float> vldCutoff(1, &mCutoff);
vldCutoff.SetRange(MIN_Cutoff, mNyquist - 1);
mCutoffCtl = S.Id(ID_Cutoff).AddTextBox(_("C&utoff:"), wxT(""), 10);
mCutoffCtl->SetName(_("Cutoff (Hz)"));
mCutoffCtl->SetValidator(vldCutoff);
S.AddUnits(_("Hz"));
FloatingPointValidator<float> vldStopbandRipple(1, &mStopbandRipple);
vldStopbandRipple.SetRange(MIN_Stopband, MAX_Stopband);
mStopbandRippleCtlP = S.AddVariableText(_("Minimum S&topband Attenuation:"), false, wxALL | wxALIGN_RIGHT | wxALIGN_CENTER_VERTICAL);
mStopbandRippleCtl = S.Id(ID_StopbandRipple).AddTextBox(wxT(""), wxT(""), 10);
mStopbandRippleCtl->SetName(_("Minimum S&topband Attenuation (dB)"));
mStopbandRippleCtl->SetValidator(vldStopbandRipple);
mStopbandRippleCtlU = S.AddVariableText(_("dB"), false, wxALL | wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL);
}
S.EndMultiColumn();
S.AddSpace(1, 1);
}
S.EndMultiColumn();
mFilterTypeCtl->SetFocus();
return;
}
void SpectrumPrefs::PopulateOrExchange(ShuttleGui & S)
{
mPopulating = true;
S.SetBorder(2);
// S.StartStatic(_("Track Settings"));
// {
mDefaultsCheckbox = 0;
if (mWt) {
/* i18n-hint: use is a verb */
mDefaultsCheckbox = S.Id(ID_DEFAULTS).TieCheckBox(_("Use Preferences"), mDefaulted);
}
S.StartStatic(_("Scale"));
{
S.StartTwoColumn();
{
S.Id(ID_SCALE).TieChoice(_("S&cale") + wxString(wxT(":")),
*(int*)&mTempSettings.scaleType,
&mScaleChoices);
mMinFreq =
S.Id(ID_MINIMUM).TieNumericTextBox(_("Mi&nimum Frequency (Hz):"),
mTempSettings.minFreq,
12);
mMaxFreq =
S.Id(ID_MAXIMUM).TieNumericTextBox(_("Ma&ximum Frequency (Hz):"),
mTempSettings.maxFreq,
12);
}
S.EndTwoColumn();
}
S.EndStatic();
S.StartStatic(_("Colors"));
{
S.StartTwoColumn();
{
mGain =
S.Id(ID_GAIN).TieNumericTextBox(_("&Gain (dB):"),
mTempSettings.gain,
8);
mRange =
S.Id(ID_RANGE).TieNumericTextBox(_("&Range (dB):"),
mTempSettings.range,
8);
mFrequencyGain =
S.Id(ID_FREQUENCY_GAIN).TieNumericTextBox(_("Frequency g&ain (dB/dec):"),
mTempSettings.frequencyGain,
4);
}
S.Id(ID_GRAYSCALE).TieCheckBox(_("S&how the spectrum using grayscale colors"),
mTempSettings.isGrayscale);
S.EndTwoColumn();
}
S.EndStatic();
S.StartStatic(_("Algorithm"));
{
S.StartMultiColumn(2);
{
mAlgorithmChoice =
S.Id(ID_ALGORITHM).TieChoice(_("A&lgorithm") + wxString(wxT(":")),
*(int*)&mTempSettings.algorithm,
&mAlgorithmChoices);
S.Id(ID_WINDOW_SIZE).TieChoice(_("Window &size:"),
mTempSettings.windowSize,
&mSizeChoices);
S.SetSizeHints(mSizeChoices);
S.Id(ID_WINDOW_TYPE).TieChoice(_("Window &type:"),
mTempSettings.windowType,
&mTypeChoices);
S.SetSizeHints(mTypeChoices);
#ifdef EXPERIMENTAL_ZERO_PADDED_SPECTROGRAMS
mZeroPaddingChoiceCtrl =
S.Id(ID_PADDING_SIZE).TieChoice(_("&Zero padding factor") + wxString(wxT(":")),
mTempSettings.zeroPaddingFactor,
&mZeroPaddingChoices);
S.SetSizeHints(mZeroPaddingChoices);
#endif
}
S.EndMultiColumn();
}
S.EndStatic();
#ifndef SPECTRAL_SELECTION_GLOBAL_SWITCH
S.Id(ID_SPECTRAL_SELECTION).TieCheckBox(_("Ena&ble Spectral Selection"),
mTempSettings.spectralSelection);
#endif
#ifdef EXPERIMENTAL_FFT_Y_GRID
S.TieCheckBox(_("Show a grid along the &Y-axis"),
mTempSettings.fftYGrid);
#endif //EXPERIMENTAL_FFT_Y_GRID
#ifdef EXPERIMENTAL_FIND_NOTES
/* i18n-hint: FFT stands for Fast Fourier Transform and probably shouldn't be translated*/
S.StartStatic(_("FFT Find Notes"));
{
S.StartTwoColumn();
{
mFindNotesMinA =
S.TieNumericTextBox(_("Minimum Amplitude (dB):"),
mTempSettings.fftFindNotes,
8);
mFindNotesN =
S.TieNumericTextBox(_("Max. Number of Notes (1..128):"),
mTempSettings.findNotesMinA,
8);
}
S.EndTwoColumn();
S.TieCheckBox(_("&Find Notes"),
mTempSettings.numberOfMaxima);
S.TieCheckBox(_("&Quantize Notes"),
mTempSettings.findNotesQuantize);
}
S.EndStatic();
#endif //EXPERIMENTAL_FIND_NOTES
// S.EndStatic();
#ifdef SPECTRAL_SELECTION_GLOBAL_SWITCH
S.StartStatic(_("Global settings"));
{
S.TieCheckBox(_("Ena&ble spectral selection"),
SpectrogramSettings::Globals::Get().spectralSelection);
}
S.EndStatic();
#endif
EnableDisableSTFTOnlyControls();
mPopulating = false;
}
void EffectDistortion::PopulateOrExchange(ShuttleGui & S)
{
S.AddSpace(0, 5);
S.StartVerticalLay();
{
S.StartMultiColumn(4, wxCENTER);
{
mTypeChoiceCtrl = S.Id(ID_Type).AddChoice(_("Distortion type:"), wxT(""), &mTableTypes);
mTypeChoiceCtrl->SetValidator(wxGenericValidator(&mParams.mTableChoiceIndx));
S.SetSizeHints(-1, -1);
mDCBlockCheckBox = S.Id(ID_DCBlock).AddCheckBox(_("DC blocking filter"),
DEF_DCBlock ? wxT("true") : wxT("false"));
}
S.EndMultiColumn();
S.AddSpace(0, 10);
S.StartStatic(_("Threshold controls"));
{
S.StartMultiColumn(4, wxEXPAND);
S.SetStretchyCol(2);
{
// Allow space for first Column
S.AddSpace(250,0); S.AddSpace(0,0); S.AddSpace(0,0); S.AddSpace(0,0);
// Upper threshold control
mThresholdTxt = S.AddVariableText(defaultLabel[0], false, wxALIGN_CENTER_VERTICAL | wxALIGN_LEFT);
FloatingPointValidator<double> vldThreshold(2, &mParams.mThreshold_dB);
vldThreshold.SetRange(MIN_Threshold_dB, MAX_Threshold_dB);
mThresholdT = S.Id(ID_Threshold).AddTextBox(wxT(""), wxT(""), 10);
mThresholdT->SetName(defaultLabel[0]);
mThresholdT->SetValidator(vldThreshold);
S.SetStyle(wxSL_HORIZONTAL);
double maxLin = DB_TO_LINEAR(MAX_Threshold_dB) * SCL_Threshold_dB;
double minLin = DB_TO_LINEAR(MIN_Threshold_dB) * SCL_Threshold_dB;
mThresholdS = S.Id(ID_Threshold).AddSlider(wxT(""), 0, maxLin, minLin);
mThresholdS->SetName(defaultLabel[0]);
S.AddSpace(20, 0);
// Noise floor control
mNoiseFloorTxt = S.AddVariableText(defaultLabel[1], false, wxALIGN_CENTER_VERTICAL | wxALIGN_LEFT);
FloatingPointValidator<double> vldfloor(2, &mParams.mNoiseFloor);
vldfloor.SetRange(MIN_NoiseFloor, MAX_NoiseFloor);
mNoiseFloorT = S.Id(ID_NoiseFloor).AddTextBox(wxT(""), wxT(""), 10);
mNoiseFloorT->SetName(defaultLabel[1]);
mNoiseFloorT->SetValidator(vldfloor);
S.SetStyle(wxSL_HORIZONTAL);
mNoiseFloorS = S.Id(ID_NoiseFloor).AddSlider(wxT(""), 0, MAX_NoiseFloor, MIN_NoiseFloor);
mNoiseFloorS->SetName(defaultLabel[1]);
S.AddSpace(20, 0);
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Parameter controls"));
{
S.StartMultiColumn(4, wxEXPAND);
S.SetStretchyCol(2);
{
// Allow space for first Column
S.AddSpace(250,0); S.AddSpace(0,0); S.AddSpace(0,0); S.AddSpace(0,0);
// Parameter1 control
mParam1Txt = S.AddVariableText(defaultLabel[2], false, wxALIGN_CENTER_VERTICAL | wxALIGN_LEFT);
FloatingPointValidator<double> vldparam1(2, &mParams.mParam1);
vldparam1.SetRange(MIN_Param1, MAX_Param1);
mParam1T = S.Id(ID_Param1).AddTextBox(wxT(""), wxT(""), 10);
mParam1T->SetName(defaultLabel[2]);
mParam1T->SetValidator(vldparam1);
S.SetStyle(wxSL_HORIZONTAL);
mParam1S = S.Id(ID_Param1).AddSlider(wxT(""), 0, MAX_Param1, MIN_Param1);
mParam1S->SetName(defaultLabel[2]);
S.AddSpace(20, 0);
// Parameter2 control
mParam2Txt = S.AddVariableText(defaultLabel[3], false, wxALIGN_CENTER_VERTICAL | wxALIGN_LEFT);
FloatingPointValidator<double> vldParam2(2, &mParams.mParam2);
vldParam2.SetRange(MIN_Param2, MAX_Param2);
mParam2T = S.Id(ID_Param2).AddTextBox(wxT(""), wxT(""), 10);
mParam2T->SetName(defaultLabel[3]);
mParam2T->SetValidator(vldParam2);
S.SetStyle(wxSL_HORIZONTAL);
mParam2S = S.Id(ID_Param2).AddSlider(wxT(""), 0, MAX_Param2, MIN_Param2);
mParam2S->SetName(defaultLabel[3]);
S.AddSpace(20, 0);
// Repeats control
mRepeatsTxt = S.AddVariableText(defaultLabel[4], false, wxALIGN_CENTER_VERTICAL | wxALIGN_LEFT);
IntegerValidator<int>vldRepeats(&mParams.mRepeats);
vldRepeats.SetRange(MIN_Repeats, MAX_Repeats);
mRepeatsT = S.Id(ID_Repeats).AddTextBox(wxT(""), wxT(""), 10);
mRepeatsT->SetName(defaultLabel[4]);
mRepeatsT->SetValidator(vldRepeats);
S.SetStyle(wxSL_HORIZONTAL);
mRepeatsS = S.Id(ID_Repeats).AddSlider(wxT(""), DEF_Repeats, MAX_Repeats, MIN_Repeats);
mRepeatsS->SetName(defaultLabel[4]);
S.AddSpace(20, 0);
}
S.EndMultiColumn();
}
S.EndStatic();
}
S.EndVerticalLay();
return;
}
