nscoord
nsColumnSetFrame::GetAvailableContentBSize(const ReflowInput& aReflowInput)
{
if (aReflowInput.AvailableBSize() == NS_INTRINSICSIZE) {
return NS_INTRINSICSIZE;
}
WritingMode wm = aReflowInput.GetWritingMode();
LogicalMargin bp = aReflowInput.ComputedLogicalBorderPadding();
bp.ApplySkipSides(GetLogicalSkipSides(&aReflowInput));
bp.BEnd(wm) = aReflowInput.ComputedLogicalBorderPadding().BEnd(wm);
return std::max(0, aReflowInput.AvailableBSize() - bp.BStartEnd(wm));
}
void
nsRubyFrame::ReflowSegment(nsPresContext* aPresContext,
const ReflowInput& aReflowInput,
nsRubyBaseContainerFrame* aBaseContainer,
nsReflowStatus& aStatus)
{
WritingMode lineWM = aReflowInput.mLineLayout->GetWritingMode();
LogicalSize availSize(lineWM, aReflowInput.AvailableISize(),
aReflowInput.AvailableBSize());
WritingMode rubyWM = GetWritingMode();
NS_ASSERTION(!rubyWM.IsOrthogonalTo(lineWM),
"Ruby frame writing-mode shouldn't be orthogonal to its line");
AutoRubyTextContainerArray textContainers(aBaseContainer);
const uint32_t rtcCount = textContainers.Length();
ReflowOutput baseMetrics(aReflowInput);
bool pushedFrame;
aReflowInput.mLineLayout->ReflowFrame(aBaseContainer, aStatus,
&baseMetrics, pushedFrame);
if (NS_INLINE_IS_BREAK_BEFORE(aStatus)) {
if (aBaseContainer != mFrames.FirstChild()) {
// Some segments may have been reflowed before, hence it is not
// a break-before for the ruby container.
aStatus = NS_INLINE_LINE_BREAK_AFTER(NS_FRAME_NOT_COMPLETE);
PushChildren(aBaseContainer, aBaseContainer->GetPrevSibling());
aReflowInput.mLineLayout->SetDirtyNextLine();
}
// This base container is not placed at all, we can skip all
// text containers paired with it.
return;
}
if (NS_FRAME_IS_NOT_COMPLETE(aStatus)) {
// It always promise that if the status is incomplete, there is a
// break occurs. Break before has been processed above. However,
// it is possible that break after happens with the frame reflow
// completed. It happens if there is a force break at the end.
MOZ_ASSERT(NS_INLINE_IS_BREAK_AFTER(aStatus));
// Find the previous sibling which we will
// insert new continuations after.
nsIFrame* lastChild;
if (rtcCount > 0) {
lastChild = textContainers.LastElement();
} else {
lastChild = aBaseContainer;
}
// Create continuations for the base container
nsIFrame* newBaseContainer = CreateNextInFlow(aBaseContainer);
// newBaseContainer is null if there are existing next-in-flows.
// We only need to move and push if there were not.
if (newBaseContainer) {
// Move the new frame after all the text containers
mFrames.RemoveFrame(newBaseContainer);
mFrames.InsertFrame(nullptr, lastChild, newBaseContainer);
// Create continuations for text containers
nsIFrame* newLastChild = newBaseContainer;
for (uint32_t i = 0; i < rtcCount; i++) {
nsIFrame* newTextContainer = CreateNextInFlow(textContainers[i]);
MOZ_ASSERT(newTextContainer, "Next-in-flow of rtc should not exist "
"if the corresponding rbc does not");
mFrames.RemoveFrame(newTextContainer);
mFrames.InsertFrame(nullptr, newLastChild, newTextContainer);
newLastChild = newTextContainer;
}
}
if (lastChild != mFrames.LastChild()) {
// Always push the next frame after the last child in this segment.
// It is possible that we pulled it back before our next-in-flow
// drain our overflow.
PushChildren(lastChild->GetNextSibling(), lastChild);
aReflowInput.mLineLayout->SetDirtyNextLine();
}
} else {
// If the ruby base container is reflowed completely, the line
// layout will remove the next-in-flows of that frame. But the
// line layout is not aware of the ruby text containers, hence
// it is necessary to remove them here.
for (uint32_t i = 0; i < rtcCount; i++) {
nsIFrame* nextRTC = textContainers[i]->GetNextInFlow();
if (nextRTC) {
nextRTC->GetParent()->DeleteNextInFlowChild(nextRTC, true);
}
}
}
nscoord segmentISize = baseMetrics.ISize(lineWM);
const nsSize dummyContainerSize;
LogicalRect baseRect =
aBaseContainer->GetLogicalRect(lineWM, dummyContainerSize);
// We need to position our rtc frames on one side or the other of the
// base container's rect, using a coordinate space that's relative to
// the ruby frame. Right now, the base container's rect's block-axis
// position is relative to the block container frame containing the
// lines, so we use 0 instead. (i.e. we assume that the base container
// is adjacent to the ruby frame's block-start edge.)
// XXX We may need to add border/padding here. See bug 1055667.
baseRect.BStart(lineWM) = 0;
// The rect for offsets of text containers.
LogicalRect offsetRect = baseRect;
for (uint32_t i = 0; i < rtcCount; i++) {
nsRubyTextContainerFrame* textContainer = textContainers[i];
WritingMode rtcWM = textContainer->GetWritingMode();
nsReflowStatus textReflowStatus;
ReflowOutput textMetrics(aReflowInput);
ReflowInput textReflowInput(aPresContext, aReflowInput, textContainer,
availSize.ConvertTo(rtcWM, lineWM));
// FIXME We probably shouldn't be using the same nsLineLayout for
// the text containers. But it should be fine now as we are
// not actually using this line layout to reflow something,
// but just read the writing mode from it.
textReflowInput.mLineLayout = aReflowInput.mLineLayout;
textContainer->Reflow(aPresContext, textMetrics,
textReflowInput, textReflowStatus);
// Ruby text containers always return NS_FRAME_COMPLETE even when
// they have continuations, because the breaking has already been
// handled when reflowing the base containers.
NS_ASSERTION(textReflowStatus == NS_FRAME_COMPLETE,
"Ruby text container must not break itself inside");
// The metrics is initialized with reflow state of this ruby frame,
// hence the writing-mode is tied to rubyWM instead of rtcWM.
LogicalSize size = textMetrics.Size(rubyWM).ConvertTo(lineWM, rubyWM);
textContainer->SetSize(lineWM, size);
nscoord reservedISize = RubyUtils::GetReservedISize(textContainer);
segmentISize = std::max(segmentISize, size.ISize(lineWM) + reservedISize);
uint8_t rubyPosition = textContainer->StyleText()->mRubyPosition;
MOZ_ASSERT(rubyPosition == NS_STYLE_RUBY_POSITION_OVER ||
rubyPosition == NS_STYLE_RUBY_POSITION_UNDER);
Maybe<LogicalSide> side;
if (rubyPosition == NS_STYLE_RUBY_POSITION_OVER) {
side.emplace(lineWM.LogicalSideForLineRelativeDir(eLineRelativeDirOver));
} else if (rubyPosition == NS_STYLE_RUBY_POSITION_UNDER) {
side.emplace(lineWM.LogicalSideForLineRelativeDir(eLineRelativeDirUnder));
} else {
// XXX inter-character support in bug 1055672
MOZ_ASSERT_UNREACHABLE("Unsupported ruby-position");
}
LogicalPoint position(lineWM);
if (side.isSome()) {
if (side.value() == eLogicalSideBStart) {
offsetRect.BStart(lineWM) -= size.BSize(lineWM);
offsetRect.BSize(lineWM) += size.BSize(lineWM);
position = offsetRect.Origin(lineWM);
} else if (side.value() == eLogicalSideBEnd) {
position = offsetRect.Origin(lineWM) +
LogicalPoint(lineWM, 0, offsetRect.BSize(lineWM));
offsetRect.BSize(lineWM) += size.BSize(lineWM);
} else {
MOZ_ASSERT_UNREACHABLE("???");
}
}
// Using a dummy container-size here, so child positioning may not be
// correct. We will fix it in nsLineLayout after the whole line is
// reflowed.
FinishReflowChild(textContainer, aPresContext, textMetrics,
&textReflowInput, lineWM, position, dummyContainerSize, 0);
}
MOZ_ASSERT(baseRect.ISize(lineWM) == offsetRect.ISize(lineWM),
"Annotations should only be placed on the block directions");
nscoord deltaISize = segmentISize - baseMetrics.ISize(lineWM);
if (deltaISize <= 0) {
RubyUtils::ClearReservedISize(aBaseContainer);
} else {
RubyUtils::SetReservedISize(aBaseContainer, deltaISize);
aReflowInput.mLineLayout->AdvanceICoord(deltaISize);
}
// Set block leadings of the base container
nscoord startLeading = baseRect.BStart(lineWM) - offsetRect.BStart(lineWM);
nscoord endLeading = offsetRect.BEnd(lineWM) - baseRect.BEnd(lineWM);
// XXX When bug 765861 gets fixed, this warning should be upgraded.
NS_WARNING_ASSERTION(startLeading >= 0 && endLeading >= 0,
"Leadings should be non-negative (because adding "
"ruby annotation can only increase the size)");
mBStartLeading = std::max(mBStartLeading, startLeading);
mBEndLeading = std::max(mBEndLeading, endLeading);
}
void
nsTableCellFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsTableCellFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);
if (aReflowInput.mFlags.mSpecialBSizeReflow) {
FirstInFlow()->AddStateBits(NS_TABLE_CELL_HAD_SPECIAL_REFLOW);
}
// see if a special bsize reflow needs to occur due to having a pct height
nsTableFrame::CheckRequestSpecialBSizeReflow(aReflowInput);
aStatus = NS_FRAME_COMPLETE;
WritingMode wm = aReflowInput.GetWritingMode();
LogicalSize availSize(wm, aReflowInput.AvailableISize(),
aReflowInput.AvailableBSize());
LogicalMargin borderPadding = aReflowInput.ComputedLogicalPadding();
LogicalMargin border = GetBorderWidth(wm);
borderPadding += border;
// reduce available space by insets, if we're in a constrained situation
availSize.ISize(wm) -= borderPadding.IStartEnd(wm);
if (NS_UNCONSTRAINEDSIZE != availSize.BSize(wm)) {
availSize.BSize(wm) -= borderPadding.BStartEnd(wm);
}
// Try to reflow the child into the available space. It might not
// fit or might need continuing.
if (availSize.BSize(wm) < 0) {
availSize.BSize(wm) = 1;
}
ReflowOutput kidSize(wm, aDesiredSize.mFlags);
kidSize.ClearSize();
SetPriorAvailISize(aReflowInput.AvailableISize());
nsIFrame* firstKid = mFrames.FirstChild();
NS_ASSERTION(firstKid, "Frame construction error, a table cell always has an inner cell frame");
nsTableFrame* tableFrame = GetTableFrame();
if (aReflowInput.mFlags.mSpecialBSizeReflow) {
const_cast<ReflowInput&>(aReflowInput).
SetComputedBSize(BSize(wm) - borderPadding.BStartEnd(wm));
DISPLAY_REFLOW_CHANGE();
}
else if (aPresContext->IsPaginated()) {
nscoord computedUnpaginatedBSize =
CalcUnpaginatedBSize((nsTableCellFrame&)*this,
*tableFrame, borderPadding.BStartEnd(wm));
if (computedUnpaginatedBSize > 0) {
const_cast<ReflowInput&>(aReflowInput).SetComputedBSize(computedUnpaginatedBSize);
DISPLAY_REFLOW_CHANGE();
}
}
else {
SetHasPctOverBSize(false);
}
WritingMode kidWM = firstKid->GetWritingMode();
ReflowInput kidReflowInput(aPresContext, aReflowInput, firstKid,
availSize.ConvertTo(kidWM, wm));
// Don't be a percent height observer if we're in the middle of
// special-bsize reflow, in case we get an accidental NotifyPercentBSize()
// call (which we shouldn't honor during special-bsize reflow)
if (!aReflowInput.mFlags.mSpecialBSizeReflow) {
// mPercentBSizeObserver is for children of cells in quirks mode,
// but only those than are tables in standards mode. NeedsToObserve
// will determine how far this is propagated to descendants.
kidReflowInput.mPercentBSizeObserver = this;
}
// Don't propagate special bsize reflow state to our kids
kidReflowInput.mFlags.mSpecialBSizeReflow = false;
if (aReflowInput.mFlags.mSpecialBSizeReflow ||
FirstInFlow()->HasAnyStateBits(NS_TABLE_CELL_HAD_SPECIAL_REFLOW)) {
// We need to force the kid to have mBResize set if we've had a
// special reflow in the past, since the non-special reflow needs to
// resize back to what it was without the special bsize reflow.
kidReflowInput.SetBResize(true);
}
nsSize containerSize =
aReflowInput.ComputedSizeAsContainerIfConstrained();
LogicalPoint kidOrigin(wm, borderPadding.IStart(wm),
borderPadding.BStart(wm));
nsRect origRect = firstKid->GetRect();
nsRect origVisualOverflow = firstKid->GetVisualOverflowRect();
bool firstReflow = firstKid->HasAnyStateBits(NS_FRAME_FIRST_REFLOW);
ReflowChild(firstKid, aPresContext, kidSize, kidReflowInput,
wm, kidOrigin, containerSize, 0, aStatus);
if (NS_FRAME_OVERFLOW_IS_INCOMPLETE(aStatus)) {
// Don't pass OVERFLOW_INCOMPLETE through tables until they can actually handle it
//XXX should paginate overflow as overflow, but not in this patch (bug 379349)
NS_FRAME_SET_INCOMPLETE(aStatus);
printf("Set table cell incomplete %p\n", static_cast<void*>(this));
}
// XXXbz is this invalidate actually needed, really?
if (HasAnyStateBits(NS_FRAME_IS_DIRTY)) {
InvalidateFrameSubtree();
}
#ifdef DEBUG
DebugCheckChildSize(firstKid, kidSize);
#endif
// 0 dimensioned cells need to be treated specially in Standard/NavQuirks mode
// see testcase "emptyCells.html"
nsIFrame* prevInFlow = GetPrevInFlow();
bool isEmpty;
if (prevInFlow) {
isEmpty = static_cast<nsTableCellFrame*>(prevInFlow)->GetContentEmpty();
} else {
isEmpty = !CellHasVisibleContent(kidSize.Height(), tableFrame, firstKid);
}
SetContentEmpty(isEmpty);
// Place the child
FinishReflowChild(firstKid, aPresContext, kidSize, &kidReflowInput,
wm, kidOrigin, containerSize, 0);
nsTableFrame::InvalidateTableFrame(firstKid, origRect, origVisualOverflow,
firstReflow);
// first, compute the bsize which can be set w/o being restricted by
// available bsize
LogicalSize cellSize(wm);
cellSize.BSize(wm) = kidSize.BSize(wm);
if (NS_UNCONSTRAINEDSIZE != cellSize.BSize(wm)) {
cellSize.BSize(wm) += borderPadding.BStartEnd(wm);
}
// next determine the cell's isize
cellSize.ISize(wm) = kidSize.ISize(wm); // at this point, we've factored in the cell's style attributes
// factor in border and padding
if (NS_UNCONSTRAINEDSIZE != cellSize.ISize(wm)) {
cellSize.ISize(wm) += borderPadding.IStartEnd(wm);
}
// set the cell's desired size and max element size
aDesiredSize.SetSize(wm, cellSize);
// the overflow area will be computed when BlockDirAlignChild() gets called
if (aReflowInput.mFlags.mSpecialBSizeReflow) {
if (aDesiredSize.BSize(wm) > BSize(wm)) {
// set a bit indicating that the pct bsize contents exceeded
// the height that they could honor in the pass 2 reflow
SetHasPctOverBSize(true);
}
if (NS_UNCONSTRAINEDSIZE == aReflowInput.AvailableBSize()) {
aDesiredSize.BSize(wm) = BSize(wm);
}
}
// If our parent is in initial reflow, it'll handle invalidating our
// entire overflow rect.
if (!GetParent()->HasAnyStateBits(NS_FRAME_FIRST_REFLOW) &&
nsSize(aDesiredSize.Width(), aDesiredSize.Height()) != mRect.Size()) {
InvalidateFrame();
}
// remember the desired size for this reflow
SetDesiredSize(aDesiredSize);
// Any absolutely-positioned children will get reflowed in
// nsFrame::FixupPositionedTableParts in another pass, so propagate our
// dirtiness to them before our parent clears our dirty bits.
PushDirtyBitToAbsoluteFrames();
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aDesiredSize);
}
bool
nsColumnSetFrame::ReflowChildren(ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus,
const ReflowConfig& aConfig,
bool aUnboundedLastColumn,
nsCollapsingMargin* aCarriedOutBEndMargin,
ColumnBalanceData& aColData)
{
aColData.Reset();
bool allFit = true;
WritingMode wm = GetWritingMode();
bool isVertical = wm.IsVertical();
bool isRTL = !wm.IsBidiLTR();
bool shrinkingBSizeOnly = !NS_SUBTREE_DIRTY(this) &&
mLastBalanceBSize > aConfig.mColMaxBSize;
#ifdef DEBUG_roc
printf("*** Doing column reflow pass: mLastBalanceBSize=%d, mColMaxBSize=%d, RTL=%d\n"
" mBalanceColCount=%d, mColISize=%d, mColGap=%d\n",
mLastBalanceBSize, aConfig.mColMaxBSize, isRTL, aConfig.mBalanceColCount,
aConfig.mColISize, aConfig.mColGap);
#endif
DrainOverflowColumns();
const bool colBSizeChanged = mLastBalanceBSize != aConfig.mColMaxBSize;
if (colBSizeChanged) {
mLastBalanceBSize = aConfig.mColMaxBSize;
// XXX Seems like this could fire if incremental reflow pushed the column set
// down so we reflow incrementally with a different available height.
// We need a way to do an incremental reflow and be sure availableHeight
// changes are taken account of! Right now I think block frames with absolute
// children might exit early.
//NS_ASSERTION(aKidReason != eReflowReason_Incremental,
// "incremental reflow should not have changed the balance height");
}
// get our border and padding
LogicalMargin borderPadding = aReflowInput.ComputedLogicalBorderPadding();
borderPadding.ApplySkipSides(GetLogicalSkipSides(&aReflowInput));
nsRect contentRect(0, 0, 0, 0);
nsOverflowAreas overflowRects;
nsIFrame* child = mFrames.FirstChild();
LogicalPoint childOrigin(wm, borderPadding.IStart(wm),
borderPadding.BStart(wm));
// In vertical-rl mode, columns will not be correctly placed if the
// reflowInput's ComputedWidth() is UNCONSTRAINED (in which case we'll get
// a containerSize.width of zero here). In that case, the column positions
// will be adjusted later, after our correct contentSize is known.
nsSize containerSize = aReflowInput.ComputedSizeAsContainerIfConstrained();
// For RTL, since the columns might not fill the frame exactly, we
// need to account for the slop. Otherwise we'll waste time moving the
// columns by some tiny amount
// XXX when all of layout is converted to logical coordinates, we
// probably won't need to do this hack any more. For now, we
// confine it to the legacy horizontal-rl case
if (!isVertical && isRTL) {
nscoord availISize = aReflowInput.AvailableISize();
if (aReflowInput.ComputedISize() != NS_INTRINSICSIZE) {
availISize = aReflowInput.ComputedISize();
}
if (availISize != NS_INTRINSICSIZE) {
childOrigin.I(wm) = containerSize.width - borderPadding.Left(wm) -
availISize;
#ifdef DEBUG_roc
printf("*** childOrigin.iCoord = %d\n", childOrigin.I(wm));
#endif
}
}
int columnCount = 0;
int contentBEnd = 0;
bool reflowNext = false;
while (child) {
// Try to skip reflowing the child. We can't skip if the child is dirty. We also can't
// skip if the next column is dirty, because the next column's first line(s)
// might be pullable back to this column. We can't skip if it's the last child
// because we need to obtain the bottom margin. We can't skip
// if this is the last column and we're supposed to assign unbounded
// height to it, because that could change the available height from
// the last time we reflowed it and we should try to pull all the
// content from its next sibling. (Note that it might be the last
// column, but not be the last child because the desired number of columns
// has changed.)
bool skipIncremental = !aReflowInput.ShouldReflowAllKids()
&& !NS_SUBTREE_DIRTY(child)
&& child->GetNextSibling()
&& !(aUnboundedLastColumn && columnCount == aConfig.mBalanceColCount - 1)
&& !NS_SUBTREE_DIRTY(child->GetNextSibling());
// If we need to pull up content from the prev-in-flow then this is not just
// a height shrink. The prev in flow will have set the dirty bit.
// Check the overflow rect YMost instead of just the child's content height. The child
// may have overflowing content that cares about the available height boundary.
// (It may also have overflowing content that doesn't care about the available height
// boundary, but if so, too bad, this optimization is defeated.)
// We want scrollable overflow here since this is a calculation that
// affects layout.
bool skipResizeBSizeShrink = false;
if (shrinkingBSizeOnly) {
switch (wm.GetBlockDir()) {
case WritingMode::eBlockTB:
if (child->GetScrollableOverflowRect().YMost() <= aConfig.mColMaxBSize) {
skipResizeBSizeShrink = true;
}
break;
case WritingMode::eBlockLR:
if (child->GetScrollableOverflowRect().XMost() <= aConfig.mColMaxBSize) {
skipResizeBSizeShrink = true;
}
break;
case WritingMode::eBlockRL:
// XXX not sure how to handle this, so for now just don't attempt
// the optimization
break;
default:
NS_NOTREACHED("unknown block direction");
break;
}
}
nscoord childContentBEnd = 0;
if (!reflowNext && (skipIncremental || skipResizeBSizeShrink)) {
// This child does not need to be reflowed, but we may need to move it
MoveChildTo(child, childOrigin, wm, containerSize);
// If this is the last frame then make sure we get the right status
nsIFrame* kidNext = child->GetNextSibling();
if (kidNext) {
aStatus = (kidNext->GetStateBits() & NS_FRAME_IS_OVERFLOW_CONTAINER)
? NS_FRAME_OVERFLOW_INCOMPLETE
: NS_FRAME_NOT_COMPLETE;
} else {
aStatus = mLastFrameStatus;
}
childContentBEnd = nsLayoutUtils::CalculateContentBEnd(wm, child);
#ifdef DEBUG_roc
printf("*** Skipping child #%d %p (incremental %d, resize block-size shrink %d): status = %d\n",
columnCount, (void*)child, skipIncremental, skipResizeBSizeShrink, aStatus);
#endif
} else {
LogicalSize availSize(wm, aConfig.mColISize, aConfig.mColMaxBSize);
if (aUnboundedLastColumn && columnCount == aConfig.mBalanceColCount - 1) {
availSize.BSize(wm) = GetAvailableContentBSize(aReflowInput);
}
LogicalSize computedSize = aReflowInput.ComputedSize(wm);
if (reflowNext)
child->AddStateBits(NS_FRAME_IS_DIRTY);
LogicalSize kidCBSize(wm, availSize.ISize(wm), computedSize.BSize(wm));
ReflowInput kidReflowInput(PresContext(), aReflowInput, child,
availSize, &kidCBSize);
kidReflowInput.mFlags.mIsTopOfPage = true;
kidReflowInput.mFlags.mTableIsSplittable = false;
kidReflowInput.mFlags.mIsColumnBalancing = aConfig.mBalanceColCount < INT32_MAX;
// We need to reflow any float placeholders, even if our column height
// hasn't changed.
kidReflowInput.mFlags.mMustReflowPlaceholders = !colBSizeChanged;
#ifdef DEBUG_roc
printf("*** Reflowing child #%d %p: availHeight=%d\n",
columnCount, (void*)child,availSize.BSize(wm));
#endif
// Note if the column's next in flow is not being changed by this incremental reflow.
// This may allow the current column to avoid trying to pull lines from the next column.
if (child->GetNextSibling() &&
!(GetStateBits() & NS_FRAME_IS_DIRTY) &&
!(child->GetNextSibling()->GetStateBits() & NS_FRAME_IS_DIRTY)) {
kidReflowInput.mFlags.mNextInFlowUntouched = true;
}
ReflowOutput kidDesiredSize(wm, aDesiredSize.mFlags);
// XXX it would be cool to consult the float manager for the
// previous block to figure out the region of floats from the
// previous column that extend into this column, and subtract
// that region from the new float manager. So you could stick a
// really big float in the first column and text in following
// columns would flow around it.
// Reflow the frame
LogicalPoint origin(wm,
childOrigin.I(wm) +
kidReflowInput.ComputedLogicalMargin().IStart(wm),
childOrigin.B(wm) +
kidReflowInput.ComputedLogicalMargin().BStart(wm));
ReflowChild(child, PresContext(), kidDesiredSize, kidReflowInput,
wm, origin, containerSize, 0, aStatus);
reflowNext = (aStatus & NS_FRAME_REFLOW_NEXTINFLOW) != 0;
#ifdef DEBUG_roc
printf("*** Reflowed child #%d %p: status = %d, desiredSize=%d,%d CarriedOutBEndMargin=%d\n",
columnCount, (void*)child, aStatus, kidDesiredSize.Width(), kidDesiredSize.Height(),
kidDesiredSize.mCarriedOutBEndMargin.get());
#endif
NS_FRAME_TRACE_REFLOW_OUT("Column::Reflow", aStatus);
*aCarriedOutBEndMargin = kidDesiredSize.mCarriedOutBEndMargin;
FinishReflowChild(child, PresContext(), kidDesiredSize,
&kidReflowInput, wm, childOrigin, containerSize, 0);
childContentBEnd = nsLayoutUtils::CalculateContentBEnd(wm, child);
if (childContentBEnd > aConfig.mColMaxBSize) {
allFit = false;
}
if (childContentBEnd > availSize.BSize(wm)) {
aColData.mMaxOverflowingBSize = std::max(childContentBEnd,
aColData.mMaxOverflowingBSize);
}
}
contentRect.UnionRect(contentRect, child->GetRect());
ConsiderChildOverflow(overflowRects, child);
contentBEnd = std::max(contentBEnd, childContentBEnd);
aColData.mLastBSize = childContentBEnd;
aColData.mSumBSize += childContentBEnd;
// Build a continuation column if necessary
nsIFrame* kidNextInFlow = child->GetNextInFlow();
if (NS_FRAME_IS_FULLY_COMPLETE(aStatus) && !NS_FRAME_IS_TRUNCATED(aStatus)) {
NS_ASSERTION(!kidNextInFlow, "next in flow should have been deleted");
child = nullptr;
break;
} else {
++columnCount;
// Make sure that the column has a next-in-flow. If not, we must
// create one to hold the overflowing stuff, even if we're just
// going to put it on our overflow list and let *our*
// next in flow handle it.
if (!kidNextInFlow) {
NS_ASSERTION(aStatus & NS_FRAME_REFLOW_NEXTINFLOW,
"We have to create a continuation, but the block doesn't want us to reflow it?");
// We need to create a continuing column
kidNextInFlow = CreateNextInFlow(child);
}
// Make sure we reflow a next-in-flow when it switches between being
// normal or overflow container
if (NS_FRAME_OVERFLOW_IS_INCOMPLETE(aStatus)) {
if (!(kidNextInFlow->GetStateBits() & NS_FRAME_IS_OVERFLOW_CONTAINER)) {
aStatus |= NS_FRAME_REFLOW_NEXTINFLOW;
reflowNext = true;
kidNextInFlow->AddStateBits(NS_FRAME_IS_OVERFLOW_CONTAINER);
}
}
else if (kidNextInFlow->GetStateBits() & NS_FRAME_IS_OVERFLOW_CONTAINER) {
aStatus |= NS_FRAME_REFLOW_NEXTINFLOW;
reflowNext = true;
kidNextInFlow->RemoveStateBits(NS_FRAME_IS_OVERFLOW_CONTAINER);
}
if ((contentBEnd > aReflowInput.ComputedMaxBSize() ||
contentBEnd > aReflowInput.ComputedBSize()) &&
aConfig.mBalanceColCount < INT32_MAX) {
// We overflowed vertically, but have not exceeded the number of
// columns. We're going to go into overflow columns now, so balancing
// no longer applies.
aColData.mHasExcessBSize = true;
}
if (columnCount >= aConfig.mBalanceColCount) {
// No more columns allowed here. Stop.
aStatus |= NS_FRAME_REFLOW_NEXTINFLOW;
kidNextInFlow->AddStateBits(NS_FRAME_IS_DIRTY);
// Move any of our leftover columns to our overflow list. Our
// next-in-flow will eventually pick them up.
const nsFrameList& continuationColumns = mFrames.RemoveFramesAfter(child);
if (continuationColumns.NotEmpty()) {
SetOverflowFrames(continuationColumns);
}
child = nullptr;
break;
}
}
if (PresContext()->HasPendingInterrupt()) {
// Stop the loop now while |child| still points to the frame that bailed
// out. We could keep going here and condition a bunch of the code in
// this loop on whether there's an interrupt, or even just keep going and
// trying to reflow the blocks (even though we know they'll interrupt
// right after their first line), but stopping now is conceptually the
// simplest (and probably fastest) thing.
break;
}
// Advance to the next column
child = child->GetNextSibling();
if (child) {
childOrigin.I(wm) += aConfig.mColISize + aConfig.mColGap;
#ifdef DEBUG_roc
printf("*** NEXT CHILD ORIGIN.icoord = %d\n", childOrigin.I(wm));
#endif
}
}
if (PresContext()->CheckForInterrupt(this) &&
(GetStateBits() & NS_FRAME_IS_DIRTY)) {
// Mark all our kids starting with |child| dirty
// Note that this is a CheckForInterrupt call, not a HasPendingInterrupt,
// because we might have interrupted while reflowing |child|, and since
// we're about to add a dirty bit to |child| we need to make sure that
// |this| is scheduled to have dirty bits marked on it and its ancestors.
// Otherwise, when we go to mark dirty bits on |child|'s ancestors we'll
// bail out immediately, since it'll already have a dirty bit.
for (; child; child = child->GetNextSibling()) {
child->AddStateBits(NS_FRAME_IS_DIRTY);
}
}
aColData.mMaxBSize = contentBEnd;
LogicalSize contentSize = LogicalSize(wm, contentRect.Size());
contentSize.BSize(wm) = std::max(contentSize.BSize(wm), contentBEnd);
mLastFrameStatus = aStatus;
// Apply computed and min/max values
if (aConfig.mComputedBSize != NS_INTRINSICSIZE) {
if (aReflowInput.AvailableBSize() != NS_INTRINSICSIZE) {
contentSize.BSize(wm) = std::min(contentSize.BSize(wm),
aConfig.mComputedBSize);
} else {
contentSize.BSize(wm) = aConfig.mComputedBSize;
}
} else {
// We add the "consumed" block-size back in so that we're applying
// constraints to the correct bSize value, then subtract it again
// after we've finished with the min/max calculation. This prevents us from
// having a last continuation that is smaller than the min bSize. but which
// has prev-in-flows, trigger a larger bSize than actually required.
contentSize.BSize(wm) =
aReflowInput.ApplyMinMaxBSize(contentSize.BSize(wm),
aConfig.mConsumedBSize);
}
if (aReflowInput.ComputedISize() != NS_INTRINSICSIZE) {
contentSize.ISize(wm) = aReflowInput.ComputedISize();
} else {
contentSize.ISize(wm) =
aReflowInput.ApplyMinMaxISize(contentSize.ISize(wm));
}
contentSize.ISize(wm) += borderPadding.IStartEnd(wm);
contentSize.BSize(wm) += borderPadding.BStartEnd(wm);
aDesiredSize.SetSize(wm, contentSize);
aDesiredSize.mOverflowAreas = overflowRects;
aDesiredSize.UnionOverflowAreasWithDesiredBounds();
// In vertical-rl mode, make a second pass if necessary to reposition the
// columns with the correct container width. (In other writing modes,
// correct containerSize was not required for column positioning so we don't
// need this fixup.)
if (wm.IsVerticalRL() && containerSize.width != contentSize.Width(wm)) {
const nsSize finalContainerSize = aDesiredSize.PhysicalSize();
for (nsIFrame* child : mFrames) {
// Get the logical position as set previously using a provisional or
// dummy containerSize, and reset with the correct container size.
child->SetPosition(wm, child->GetLogicalPosition(wm, containerSize),
finalContainerSize);
}
}
#ifdef DEBUG_roc
printf("*** DONE PASS feasible=%d\n", allFit && NS_FRAME_IS_FULLY_COMPLETE(aStatus)
&& !NS_FRAME_IS_TRUNCATED(aStatus));
#endif
return allFit && NS_FRAME_IS_FULLY_COMPLETE(aStatus)
&& !NS_FRAME_IS_TRUNCATED(aStatus);
}
void
nsColumnSetFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
// Don't support interruption in columns
nsPresContext::InterruptPreventer noInterrupts(aPresContext);
DO_GLOBAL_REFLOW_COUNT("nsColumnSetFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);
// Initialize OUT parameter
aStatus = NS_FRAME_COMPLETE;
// Our children depend on our block-size if we have a fixed block-size.
if (aReflowInput.ComputedBSize() != NS_AUTOHEIGHT) {
AddStateBits(NS_FRAME_CONTAINS_RELATIVE_BSIZE);
} else {
RemoveStateBits(NS_FRAME_CONTAINS_RELATIVE_BSIZE);
}
#ifdef DEBUG
nsFrameList::Enumerator oc(GetChildList(kOverflowContainersList));
for (; !oc.AtEnd(); oc.Next()) {
MOZ_ASSERT(!IS_TRUE_OVERFLOW_CONTAINER(oc.get()));
}
nsFrameList::Enumerator eoc(GetChildList(kExcessOverflowContainersList));
for (; !eoc.AtEnd(); eoc.Next()) {
MOZ_ASSERT(!IS_TRUE_OVERFLOW_CONTAINER(eoc.get()));
}
#endif
nsOverflowAreas ocBounds;
nsReflowStatus ocStatus = NS_FRAME_COMPLETE;
if (GetPrevInFlow()) {
ReflowOverflowContainerChildren(aPresContext, aReflowInput, ocBounds, 0,
ocStatus);
}
//------------ Handle Incremental Reflow -----------------
// If inline size is unconstrained, set aForceAuto to true to allow
// the columns to expand in the inline direction. (This typically
// happens in orthogonal flows where the inline direction is the
// container's block direction).
ReflowConfig config =
ChooseColumnStrategy(aReflowInput,
aReflowInput.ComputedISize() == NS_UNCONSTRAINEDSIZE);
// If balancing, then we allow the last column to grow to unbounded
// height during the first reflow. This gives us a way to estimate
// what the average column height should be, because we can measure
// the heights of all the columns and sum them up. But don't do this
// if we have a next in flow because we don't want to suck all its
// content back here and then have to push it out again!
nsIFrame* nextInFlow = GetNextInFlow();
bool unboundedLastColumn = config.mIsBalancing && !nextInFlow;
nsCollapsingMargin carriedOutBottomMargin;
ColumnBalanceData colData;
colData.mHasExcessBSize = false;
bool feasible = ReflowColumns(aDesiredSize, aReflowInput, aStatus, config,
unboundedLastColumn, &carriedOutBottomMargin,
colData);
// If we're not balancing, then we're already done, since we should have
// reflown all of our children, and there is no need for a binary search to
// determine proper column height.
if (config.mIsBalancing && !aPresContext->HasPendingInterrupt()) {
FindBestBalanceBSize(aReflowInput, aPresContext, config, colData,
aDesiredSize, carriedOutBottomMargin,
unboundedLastColumn, feasible, aStatus);
}
if (aPresContext->HasPendingInterrupt() &&
aReflowInput.AvailableBSize() == NS_UNCONSTRAINEDSIZE) {
// In this situation, we might be lying about our reflow status, because
// our last kid (the one that got interrupted) was incomplete. Fix that.
aStatus = NS_FRAME_COMPLETE;
}
NS_ASSERTION(NS_FRAME_IS_FULLY_COMPLETE(aStatus) ||
aReflowInput.AvailableBSize() != NS_UNCONSTRAINEDSIZE,
"Column set should be complete if the available block-size is unconstrained");
// Merge overflow container bounds and status.
aDesiredSize.mOverflowAreas.UnionWith(ocBounds);
NS_MergeReflowStatusInto(&aStatus, ocStatus);
FinishReflowWithAbsoluteFrames(aPresContext, aDesiredSize, aReflowInput, aStatus, false);
aDesiredSize.mCarriedOutBEndMargin = carriedOutBottomMargin;
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aDesiredSize);
}
void
nsAbsoluteContainingBlock::ReflowAbsoluteFrame(nsIFrame* aDelegatingFrame,
nsPresContext* aPresContext,
const ReflowInput& aReflowInput,
const nsRect& aContainingBlock,
AbsPosReflowFlags aFlags,
nsIFrame* aKidFrame,
nsReflowStatus& aStatus,
nsOverflowAreas* aOverflowAreas)
{
#ifdef DEBUG
if (nsBlockFrame::gNoisyReflow) {
nsFrame::IndentBy(stdout,nsBlockFrame::gNoiseIndent);
printf("abs pos ");
nsAutoString name;
aKidFrame->GetFrameName(name);
printf("%s ", NS_LossyConvertUTF16toASCII(name).get());
char width[16];
char height[16];
PrettyUC(aReflowInput.AvailableWidth(), width, 16);
PrettyUC(aReflowInput.AvailableHeight(), height, 16);
printf(" a=%s,%s ", width, height);
PrettyUC(aReflowInput.ComputedWidth(), width, 16);
PrettyUC(aReflowInput.ComputedHeight(), height, 16);
printf("c=%s,%s \n", width, height);
}
AutoNoisyIndenter indent(nsBlockFrame::gNoisy);
#endif // DEBUG
WritingMode wm = aKidFrame->GetWritingMode();
LogicalSize logicalCBSize(wm, aContainingBlock.Size());
nscoord availISize = logicalCBSize.ISize(wm);
if (availISize == -1) {
NS_ASSERTION(aReflowInput.ComputedSize(wm).ISize(wm) !=
NS_UNCONSTRAINEDSIZE,
"Must have a useful inline-size _somewhere_");
availISize =
aReflowInput.ComputedSizeWithPadding(wm).ISize(wm);
}
uint32_t rsFlags = 0;
if (aFlags & AbsPosReflowFlags::eIsGridContainerCB) {
// When a grid container generates the abs.pos. CB for a *child* then
// the static-position is the CB origin (i.e. of the grid area rect).
// https://drafts.csswg.org/css-grid/#static-position
nsIFrame* placeholder =
aPresContext->PresShell()->GetPlaceholderFrameFor(aKidFrame);
if (placeholder && placeholder->GetParent() == aDelegatingFrame) {
rsFlags |= ReflowInput::STATIC_POS_IS_CB_ORIGIN;
}
}
ReflowInput kidReflowInput(aPresContext, aReflowInput, aKidFrame,
LogicalSize(wm, availISize,
NS_UNCONSTRAINEDSIZE),
&logicalCBSize, rsFlags);
// Get the border values
WritingMode outerWM = aReflowInput.GetWritingMode();
const LogicalMargin border(outerWM,
aReflowInput.mStyleBorder->GetComputedBorder());
LogicalMargin margin =
kidReflowInput.ComputedLogicalMargin().ConvertTo(outerWM, wm);
// If we're doing CSS Box Alignment in either axis, that will apply the
// margin for us in that axis (since the thing that's aligned is the margin
// box). So, we clear out the margin here to avoid applying it twice.
if (kidReflowInput.mFlags.mIOffsetsNeedCSSAlign) {
margin.IStart(outerWM) = margin.IEnd(outerWM) = 0;
}
if (kidReflowInput.mFlags.mBOffsetsNeedCSSAlign) {
margin.BStart(outerWM) = margin.BEnd(outerWM) = 0;
}
bool constrainBSize = (aReflowInput.AvailableBSize() != NS_UNCONSTRAINEDSIZE)
&& (aFlags & AbsPosReflowFlags::eConstrainHeight)
// Don't split if told not to (e.g. for fixed frames)
&& (aDelegatingFrame->GetType() != nsGkAtoms::inlineFrame)
//XXX we don't handle splitting frames for inline absolute containing blocks yet
&& (aKidFrame->GetLogicalRect(aContainingBlock.Size()).BStart(wm) <=
aReflowInput.AvailableBSize());
// Don't split things below the fold. (Ideally we shouldn't *have*
// anything totally below the fold, but we can't position frames
// across next-in-flow breaks yet.
if (constrainBSize) {
kidReflowInput.AvailableBSize() =
aReflowInput.AvailableBSize() - border.ConvertTo(wm, outerWM).BStart(wm) -
kidReflowInput.ComputedLogicalMargin().BStart(wm);
if (NS_AUTOOFFSET != kidReflowInput.ComputedLogicalOffsets().BStart(wm)) {
kidReflowInput.AvailableBSize() -=
kidReflowInput.ComputedLogicalOffsets().BStart(wm);
}
}
// Do the reflow
ReflowOutput kidDesiredSize(kidReflowInput);
aKidFrame->Reflow(aPresContext, kidDesiredSize, kidReflowInput, aStatus);
const LogicalSize kidSize = kidDesiredSize.Size(wm).ConvertTo(outerWM, wm);
LogicalMargin offsets =
kidReflowInput.ComputedLogicalOffsets().ConvertTo(outerWM, wm);
// If we're solving for start in either inline or block direction,
// then compute it now that we know the dimensions.
ResolveSizeDependentOffsets(aPresContext, kidReflowInput, kidSize, margin,
&offsets, &logicalCBSize);
// Position the child relative to our padding edge
LogicalRect rect(outerWM,
border.IStart(outerWM) + offsets.IStart(outerWM) +
margin.IStart(outerWM),
border.BStart(outerWM) + offsets.BStart(outerWM) +
margin.BStart(outerWM),
kidSize.ISize(outerWM), kidSize.BSize(outerWM));
nsRect r =
rect.GetPhysicalRect(outerWM, logicalCBSize.GetPhysicalSize(wm) +
border.Size(outerWM).GetPhysicalSize(outerWM));
// Offset the frame rect by the given origin of the absolute containing block.
// If the frame is auto-positioned on both sides of an axis, it will be
// positioned based on its containing block and we don't need to offset
// (unless the caller demands it (the STATIC_POS_IS_CB_ORIGIN case)).
if (aContainingBlock.TopLeft() != nsPoint(0, 0)) {
const nsStyleSides& offsets = kidReflowInput.mStylePosition->mOffset;
if (!(offsets.GetLeftUnit() == eStyleUnit_Auto &&
offsets.GetRightUnit() == eStyleUnit_Auto) ||
(rsFlags & ReflowInput::STATIC_POS_IS_CB_ORIGIN)) {
r.x += aContainingBlock.x;
}
if (!(offsets.GetTopUnit() == eStyleUnit_Auto &&
offsets.GetBottomUnit() == eStyleUnit_Auto) ||
(rsFlags & ReflowInput::STATIC_POS_IS_CB_ORIGIN)) {
r.y += aContainingBlock.y;
}
}
aKidFrame->SetRect(r);
nsView* view = aKidFrame->GetView();
if (view) {
// Size and position the view and set its opacity, visibility, content
// transparency, and clip
nsContainerFrame::SyncFrameViewAfterReflow(aPresContext, aKidFrame, view,
kidDesiredSize.VisualOverflow());
} else {
nsContainerFrame::PositionChildViews(aKidFrame);
}
aKidFrame->DidReflow(aPresContext, &kidReflowInput,
nsDidReflowStatus::FINISHED);
#ifdef DEBUG
if (nsBlockFrame::gNoisyReflow) {
nsFrame::IndentBy(stdout,nsBlockFrame::gNoiseIndent - 1);
printf("abs pos ");
nsAutoString name;
aKidFrame->GetFrameName(name);
printf("%s ", NS_LossyConvertUTF16toASCII(name).get());
printf("%p rect=%d,%d,%d,%d\n", static_cast<void*>(aKidFrame),
r.x, r.y, r.width, r.height);
}
#endif
if (aOverflowAreas) {
aOverflowAreas->UnionWith(kidDesiredSize.mOverflowAreas + r.TopLeft());
}
}
BlockReflowInput::BlockReflowInput(const ReflowInput& aReflowInput,
nsPresContext* aPresContext,
nsBlockFrame* aFrame,
bool aBStartMarginRoot,
bool aBEndMarginRoot,
bool aBlockNeedsFloatManager,
nscoord aConsumedBSize)
: mBlock(aFrame),
mPresContext(aPresContext),
mReflowInput(aReflowInput),
mContentArea(aReflowInput.GetWritingMode()),
mPushedFloats(nullptr),
mOverflowTracker(nullptr),
mBorderPadding(mReflowInput.ComputedLogicalBorderPadding()),
mPrevBEndMargin(),
mLineNumber(0),
mFloatBreakType(StyleClear::None),
mConsumedBSize(aConsumedBSize)
{
if (!sFloatFragmentsInsideColumnPrefCached) {
sFloatFragmentsInsideColumnPrefCached = true;
Preferences::AddBoolVarCache(&sFloatFragmentsInsideColumnEnabled,
"layout.float-fragments-inside-column.enabled");
}
mFlags.mFloatFragmentsInsideColumnEnabled = sFloatFragmentsInsideColumnEnabled;
WritingMode wm = aReflowInput.GetWritingMode();
mFlags.mIsFirstInflow = !aFrame->GetPrevInFlow();
mFlags.mIsOverflowContainer = IS_TRUE_OVERFLOW_CONTAINER(aFrame);
nsIFrame::LogicalSides logicalSkipSides =
aFrame->GetLogicalSkipSides(&aReflowInput);
mBorderPadding.ApplySkipSides(logicalSkipSides);
// Note that mContainerSize is the physical size, needed to
// convert logical block-coordinates in vertical-rl writing mode
// (measured from a RHS origin) to physical coordinates within the
// containing block.
// If aReflowInput doesn't have a constrained ComputedWidth(), we set
// mContainerSize.width to zero, which means lines will be positioned
// (physically) incorrectly; we will fix them up at the end of
// nsBlockFrame::Reflow, after we know the total block-size of the
// frame.
mContainerSize.width = aReflowInput.ComputedWidth();
if (mContainerSize.width == NS_UNCONSTRAINEDSIZE) {
mContainerSize.width = 0;
}
mContainerSize.width += mBorderPadding.LeftRight(wm);
// For now at least, we don't do that fix-up for mContainerHeight.
// It's only used in nsBidiUtils::ReorderFrames for vertical rtl
// writing modes, which aren't fully supported for the time being.
mContainerSize.height = aReflowInput.ComputedHeight() +
mBorderPadding.TopBottom(wm);
if ((aBStartMarginRoot && !logicalSkipSides.BStart()) ||
0 != mBorderPadding.BStart(wm)) {
mFlags.mIsBStartMarginRoot = true;
mFlags.mShouldApplyBStartMargin = true;
}
if ((aBEndMarginRoot && !logicalSkipSides.BEnd()) ||
0 != mBorderPadding.BEnd(wm)) {
mFlags.mIsBEndMarginRoot = true;
}
if (aBlockNeedsFloatManager) {
mFlags.mBlockNeedsFloatManager = true;
}
mFloatManager = aReflowInput.mFloatManager;
NS_ASSERTION(mFloatManager,
"FloatManager should be set in BlockReflowInput" );
if (mFloatManager) {
// Save the coordinate system origin for later.
mFloatManager->GetTranslation(mFloatManagerI, mFloatManagerB);
mFloatManager->PushState(&mFloatManagerStateBefore); // never popped
}
mReflowStatus = NS_FRAME_COMPLETE;
mNextInFlow = static_cast<nsBlockFrame*>(mBlock->GetNextInFlow());
LAYOUT_WARN_IF_FALSE(NS_UNCONSTRAINEDSIZE != aReflowInput.ComputedISize(),
"have unconstrained width; this should only result "
"from very large sizes, not attempts at intrinsic "
"width calculation");
mContentArea.ISize(wm) = aReflowInput.ComputedISize();
// Compute content area height. Unlike the width, if we have a
// specified style height we ignore it since extra content is
// managed by the "overflow" property. When we don't have a
// specified style height then we may end up limiting our height if
// the availableHeight is constrained (this situation occurs when we
// are paginated).
if (NS_UNCONSTRAINEDSIZE != aReflowInput.AvailableBSize()) {
// We are in a paginated situation. The bottom edge is just inside
// the bottom border and padding. The content area height doesn't
// include either border or padding edge.
mBEndEdge = aReflowInput.AvailableBSize() - mBorderPadding.BEnd(wm);
mContentArea.BSize(wm) = std::max(0, mBEndEdge - mBorderPadding.BStart(wm));
}
else {
// When we are not in a paginated situation then we always use
// a constrained height.
mFlags.mHasUnconstrainedBSize = true;
mContentArea.BSize(wm) = mBEndEdge = NS_UNCONSTRAINEDSIZE;
}
mContentArea.IStart(wm) = mBorderPadding.IStart(wm);
mBCoord = mContentArea.BStart(wm) = mBorderPadding.BStart(wm);
mPrevChild = nullptr;
mCurrentLine = aFrame->LinesEnd();
mMinLineHeight = aReflowInput.CalcLineHeight();
}
void
nsTableWrapperFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aOuterRI,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsTableWrapperFrame");
DISPLAY_REFLOW(aPresContext, this, aOuterRI, aDesiredSize, aStatus);
// Initialize out parameters
aDesiredSize.ClearSize();
aStatus = NS_FRAME_COMPLETE;
if (!HasAnyStateBits(NS_FRAME_FIRST_REFLOW)) {
// Set up our kids. They're already present, on an overflow list,
// or there are none so we'll create them now
MoveOverflowToChildList();
}
Maybe<ReflowInput> captionRI;
Maybe<ReflowInput> innerRI;
nsRect origInnerRect = InnerTableFrame()->GetRect();
nsRect origInnerVisualOverflow = InnerTableFrame()->GetVisualOverflowRect();
bool innerFirstReflow =
InnerTableFrame()->HasAnyStateBits(NS_FRAME_FIRST_REFLOW);
nsRect origCaptionRect;
nsRect origCaptionVisualOverflow;
bool captionFirstReflow = false;
if (mCaptionFrames.NotEmpty()) {
origCaptionRect = mCaptionFrames.FirstChild()->GetRect();
origCaptionVisualOverflow =
mCaptionFrames.FirstChild()->GetVisualOverflowRect();
captionFirstReflow =
mCaptionFrames.FirstChild()->HasAnyStateBits(NS_FRAME_FIRST_REFLOW);
}
// ComputeAutoSize has to match this logic.
WritingMode wm = aOuterRI.GetWritingMode();
uint8_t captionSide = GetCaptionSide();
WritingMode captionWM = wm; // will be changed below if necessary
if (captionSide == NO_SIDE) {
// We don't have a caption.
OuterBeginReflowChild(aPresContext, InnerTableFrame(), aOuterRI,
innerRI, aOuterRI.ComputedSize(wm).ISize(wm));
} else if (captionSide == NS_STYLE_CAPTION_SIDE_LEFT ||
captionSide == NS_STYLE_CAPTION_SIDE_RIGHT) {
// ComputeAutoSize takes care of making side captions small. Compute
// the caption's size first, and tell the table to fit in what's left.
OuterBeginReflowChild(aPresContext, mCaptionFrames.FirstChild(), aOuterRI,
captionRI, aOuterRI.ComputedSize(wm).ISize(wm));
captionWM = captionRI->GetWritingMode();
nscoord innerAvailISize = aOuterRI.ComputedSize(wm).ISize(wm) -
captionRI->ComputedSizeWithMarginBorderPadding(wm).ISize(wm);
OuterBeginReflowChild(aPresContext, InnerTableFrame(), aOuterRI,
innerRI, innerAvailISize);
} else if (captionSide == NS_STYLE_CAPTION_SIDE_TOP ||
captionSide == NS_STYLE_CAPTION_SIDE_BOTTOM) {
// Compute the table's size first, and then prevent the caption from
// being larger in the inline dir unless it has to be.
//
// Note that CSS 2.1 (but not 2.0) says:
// The width of the anonymous box is the border-edge width of the
// table box inside it
// We don't actually make our anonymous box that isize (if we did,
// it would break 'auto' margins), but this effectively does that.
OuterBeginReflowChild(aPresContext, InnerTableFrame(), aOuterRI,
innerRI, aOuterRI.ComputedSize(wm).ISize(wm));
// It's good that CSS 2.1 says not to include margins, since we
// can't, since they already been converted so they exactly
// fill the available isize (ignoring the margin on one side if
// neither are auto). (We take advantage of that later when we call
// GetCaptionOrigin, though.)
nscoord innerBorderISize =
innerRI->ComputedSizeWithBorderPadding(wm).ISize(wm);
OuterBeginReflowChild(aPresContext, mCaptionFrames.FirstChild(), aOuterRI,
captionRI, innerBorderISize);
captionWM = captionRI->GetWritingMode();
} else {
NS_ASSERTION(captionSide == NS_STYLE_CAPTION_SIDE_TOP_OUTSIDE ||
captionSide == NS_STYLE_CAPTION_SIDE_BOTTOM_OUTSIDE,
"unexpected caption-side");
// Size the table and the caption independently.
captionWM = mCaptionFrames.FirstChild()->GetWritingMode();
OuterBeginReflowChild(aPresContext, mCaptionFrames.FirstChild(),
aOuterRI, captionRI,
aOuterRI.ComputedSize(captionWM).ISize(captionWM));
OuterBeginReflowChild(aPresContext, InnerTableFrame(), aOuterRI,
innerRI, aOuterRI.ComputedSize(wm).ISize(wm));
}
// First reflow the caption.
Maybe<ReflowOutput> captionMet;
LogicalSize captionSize(wm);
LogicalMargin captionMargin(wm);
if (mCaptionFrames.NotEmpty()) {
captionMet.emplace(wm);
nsReflowStatus capStatus; // don't let the caption cause incomplete
OuterDoReflowChild(aPresContext, mCaptionFrames.FirstChild(),
*captionRI, *captionMet, capStatus);
captionSize.ISize(wm) = captionMet->ISize(wm);
captionSize.BSize(wm) = captionMet->BSize(wm);
captionMargin =
captionRI->ComputedLogicalMargin().ConvertTo(wm, captionWM);
// Now that we know the bsize of the caption, reduce the available bsize
// for the table frame if we are bsize constrained and the caption is above
// or below the inner table. Also reduce the CB size that we store for
// our children in case we're a grid item, by the same amount.
LogicalSize* cbSize = Properties().Get(GridItemCBSizeProperty());
if (NS_UNCONSTRAINEDSIZE != aOuterRI.AvailableBSize() || cbSize) {
nscoord captionBSize = 0;
nscoord captionISize = 0;
switch (captionSide) {
case NS_STYLE_CAPTION_SIDE_TOP:
case NS_STYLE_CAPTION_SIDE_BOTTOM:
case NS_STYLE_CAPTION_SIDE_TOP_OUTSIDE:
case NS_STYLE_CAPTION_SIDE_BOTTOM_OUTSIDE:
captionBSize = captionSize.BSize(wm) + captionMargin.BStartEnd(wm);
break;
case NS_STYLE_CAPTION_SIDE_LEFT:
case NS_STYLE_CAPTION_SIDE_RIGHT:
captionISize = captionSize.ISize(wm) + captionMargin.IStartEnd(wm);
break;
}
if (NS_UNCONSTRAINEDSIZE != aOuterRI.AvailableBSize()) {
innerRI->AvailableBSize() =
std::max(0, innerRI->AvailableBSize() - captionBSize);
}
if (cbSize) {
// Shrink the CB size by the size reserved for the caption.
LogicalSize oldCBSize = *cbSize;
cbSize->ISize(wm) = std::max(0, cbSize->ISize(wm) - captionISize);
cbSize->BSize(wm) = std::max(0, cbSize->BSize(wm) - captionBSize);
if (oldCBSize != *cbSize) {
// Reset the inner table's ReflowInput to stretch it to the new size.
innerRI.reset();
OuterBeginReflowChild(aPresContext, InnerTableFrame(), aOuterRI,
innerRI, aOuterRI.ComputedSize(wm).ISize(wm));
}
}
}
}
// Then, now that we know how much to reduce the isize of the inner
// table to account for side captions, reflow the inner table.
ReflowOutput innerMet(innerRI->GetWritingMode());
OuterDoReflowChild(aPresContext, InnerTableFrame(), *innerRI,
innerMet, aStatus);
LogicalSize innerSize(wm, innerMet.ISize(wm), innerMet.BSize(wm));
LogicalMargin innerMargin = innerRI->ComputedLogicalMargin();
LogicalSize containSize(wm, GetContainingBlockSize(aOuterRI));
// Now that we've reflowed both we can place them.
// XXXldb Most of the input variables here are now uninitialized!
// XXX Need to recompute inner table's auto margins for the case of side
// captions. (Caption's are broken too, but that should be fixed earlier.)
// Compute the desiredSize so that we can use it as the containerSize
// for the FinishReflowChild calls below.
LogicalSize desiredSize(wm);
SetDesiredSize(captionSide, innerSize, captionSize,
innerMargin, captionMargin,
desiredSize.ISize(wm), desiredSize.BSize(wm), wm);
aDesiredSize.SetSize(wm, desiredSize);
nsSize containerSize = aDesiredSize.PhysicalSize();
// XXX It's possible for this to be NS_UNCONSTRAINEDSIZE, which will result
// in assertions from FinishReflowChild.
if (mCaptionFrames.NotEmpty()) {
LogicalPoint captionOrigin(wm);
GetCaptionOrigin(captionSide, containSize, innerSize, innerMargin,
captionSize, captionMargin, captionOrigin, wm);
FinishReflowChild(mCaptionFrames.FirstChild(), aPresContext, *captionMet,
captionRI.ptr(), wm, captionOrigin, containerSize, 0);
captionRI.reset();
}
// XXX If the bsize is constrained then we need to check whether
// everything still fits...
LogicalPoint innerOrigin(wm);
GetInnerOrigin(captionSide, containSize, captionSize, captionMargin,
innerSize, innerMargin, innerOrigin, wm);
FinishReflowChild(InnerTableFrame(), aPresContext, innerMet, innerRI.ptr(),
wm, innerOrigin, containerSize, 0);
innerRI.reset();
nsTableFrame::InvalidateTableFrame(InnerTableFrame(), origInnerRect,
origInnerVisualOverflow,
innerFirstReflow);
if (mCaptionFrames.NotEmpty()) {
nsTableFrame::InvalidateTableFrame(mCaptionFrames.FirstChild(),
origCaptionRect,
origCaptionVisualOverflow,
captionFirstReflow);
}
UpdateOverflowAreas(aDesiredSize);
if (GetPrevInFlow()) {
ReflowOverflowContainerChildren(aPresContext, aOuterRI,
aDesiredSize.mOverflowAreas, 0,
aStatus);
}
FinishReflowWithAbsoluteFrames(aPresContext, aDesiredSize, aOuterRI, aStatus);
// Return our desired rect
NS_FRAME_SET_TRUNCATION(aStatus, aOuterRI, aDesiredSize);
}
/* virtual */ void
nsRubyBaseContainerFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsRubyBaseContainerFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);
aStatus = NS_FRAME_COMPLETE;
if (!aReflowInput.mLineLayout) {
NS_ASSERTION(
aReflowInput.mLineLayout,
"No line layout provided to RubyBaseContainerFrame reflow method.");
return;
}
mDescendantLeadings.Reset();
MoveOverflowToChildList();
// Ask text containers to drain overflows
AutoRubyTextContainerArray textContainers(this);
const uint32_t rtcCount = textContainers.Length();
for (uint32_t i = 0; i < rtcCount; i++) {
textContainers[i]->MoveOverflowToChildList();
}
WritingMode lineWM = aReflowInput.mLineLayout->GetWritingMode();
LogicalSize availSize(lineWM, aReflowInput.AvailableISize(),
aReflowInput.AvailableBSize());
// We have a reflow state and a line layout for each RTC.
// They are conceptually the state of the RTCs, but we don't actually
// reflow those RTCs in this code. These two arrays are holders of
// the reflow states and line layouts.
// Since there are pointers refer to reflow states and line layouts,
// it is necessary to guarantee that they won't be moved. For this
// reason, they are wrapped in UniquePtr here.
AutoTArray<UniquePtr<ReflowInput>, RTC_ARRAY_SIZE> reflowInputs;
AutoTArray<UniquePtr<nsLineLayout>, RTC_ARRAY_SIZE> lineLayouts;
reflowInputs.SetCapacity(rtcCount);
lineLayouts.SetCapacity(rtcCount);
// Begin the line layout for each ruby text container in advance.
bool hasSpan = false;
for (uint32_t i = 0; i < rtcCount; i++) {
nsRubyTextContainerFrame* textContainer = textContainers[i];
if (textContainer->IsSpanContainer()) {
hasSpan = true;
}
ReflowInput* reflowInput = new ReflowInput(
aPresContext, *aReflowInput.mParentReflowInput, textContainer,
availSize.ConvertTo(textContainer->GetWritingMode(), lineWM));
reflowInputs.AppendElement(reflowInput);
nsLineLayout* lineLayout = new nsLineLayout(aPresContext,
reflowInput->mFloatManager,
reflowInput, nullptr,
aReflowInput.mLineLayout);
lineLayout->SetSuppressLineWrap(true);
lineLayouts.AppendElement(lineLayout);
// Line number is useless for ruby text
// XXX nullptr here may cause problem, see comments for
// nsLineLayout::mBlockRI and nsLineLayout::AddFloat
lineLayout->Init(nullptr, reflowInput->CalcLineHeight(), -1);
reflowInput->mLineLayout = lineLayout;
// Border and padding are suppressed on ruby text containers.
// If the writing mode is vertical-rl, the horizontal position of
// rt frames will be updated when reflowing this text container,
// hence leave container size 0 here for now.
lineLayout->BeginLineReflow(0, 0, reflowInput->ComputedISize(),
NS_UNCONSTRAINEDSIZE,
false, false, lineWM, nsSize(0, 0));
lineLayout->AttachRootFrameToBaseLineLayout();
}
aReflowInput.mLineLayout->BeginSpan(this, &aReflowInput,
0, aReflowInput.AvailableISize(),
&mBaseline);
bool allowInitialLineBreak, allowLineBreak;
GetIsLineBreakAllowed(this, aReflowInput.mLineLayout->LineIsBreakable(),
&allowInitialLineBreak, &allowLineBreak);
nscoord isize = 0;
// Reflow columns excluding any span
RubyReflowInput reflowInput = {
allowInitialLineBreak, allowLineBreak && !hasSpan,
textContainers, aReflowInput, reflowInputs
};
isize = ReflowColumns(reflowInput, aStatus);
DebugOnly<nscoord> lineSpanSize = aReflowInput.mLineLayout->EndSpan(this);
aDesiredSize.ISize(lineWM) = isize;
// When there are no frames inside the ruby base container, EndSpan
// will return 0. However, in this case, the actual width of the
// container could be non-zero because of non-empty ruby annotations.
// XXX When bug 765861 gets fixed, this warning should be upgraded.
NS_WARNING_ASSERTION(
NS_INLINE_IS_BREAK(aStatus) || isize == lineSpanSize || mFrames.IsEmpty(),
"bad isize");
// If there exists any span, the columns must either be completely
// reflowed, or be not reflowed at all.
MOZ_ASSERT(NS_INLINE_IS_BREAK_BEFORE(aStatus) ||
NS_FRAME_IS_COMPLETE(aStatus) || !hasSpan);
if (!NS_INLINE_IS_BREAK_BEFORE(aStatus) &&
NS_FRAME_IS_COMPLETE(aStatus) && hasSpan) {
// Reflow spans
RubyReflowInput reflowInput = {
false, false, textContainers, aReflowInput, reflowInputs
};
nscoord spanISize = ReflowSpans(reflowInput);
isize = std::max(isize, spanISize);
}
for (uint32_t i = 0; i < rtcCount; i++) {
// It happens before the ruby text container is reflowed, and that
// when it is reflowed, it will just use this size.
nsRubyTextContainerFrame* textContainer = textContainers[i];
nsLineLayout* lineLayout = lineLayouts[i].get();
RubyUtils::ClearReservedISize(textContainer);
nscoord rtcISize = lineLayout->GetCurrentICoord();
// Only span containers and containers with collapsed annotations
// need reserving isize. For normal ruby text containers, their
// children will be expanded properly. We only need to expand their
// own size.
if (!textContainer->IsSpanContainer()) {
rtcISize = isize;
} else if (isize > rtcISize) {
RubyUtils::SetReservedISize(textContainer, isize - rtcISize);
}
lineLayout->VerticalAlignLine();
textContainer->SetISize(rtcISize);
lineLayout->EndLineReflow();
}
// Border and padding are suppressed on ruby base container,
// create a fake borderPadding for setting BSize.
WritingMode frameWM = aReflowInput.GetWritingMode();
LogicalMargin borderPadding(frameWM);
nsLayoutUtils::SetBSizeFromFontMetrics(this, aDesiredSize,
borderPadding, lineWM, frameWM);
}