void
nsNumberControlFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsNumberControlFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);
NS_ASSERTION(mOuterWrapper, "Outer wrapper div must exist!");
NS_ASSERTION(!GetPrevContinuation() && !GetNextContinuation(),
"nsNumberControlFrame should not have continuations; if it does we "
"need to call RegUnregAccessKey only for the first");
NS_ASSERTION(!mFrames.FirstChild() ||
!mFrames.FirstChild()->GetNextSibling(),
"We expect at most one direct child frame");
if (mState & NS_FRAME_FIRST_REFLOW) {
nsFormControlFrame::RegUnRegAccessKey(this, true);
}
const WritingMode myWM = aReflowInput.GetWritingMode();
// The ISize of our content box, which is the available ISize
// for our anonymous content:
const nscoord contentBoxISize = aReflowInput.ComputedISize();
nscoord contentBoxBSize = aReflowInput.ComputedBSize();
// Figure out our border-box sizes as well (by adding borderPadding to
// content-box sizes):
const nscoord borderBoxISize = contentBoxISize +
aReflowInput.ComputedLogicalBorderPadding().IStartEnd(myWM);
nscoord borderBoxBSize;
if (contentBoxBSize != NS_INTRINSICSIZE) {
borderBoxBSize = contentBoxBSize +
aReflowInput.ComputedLogicalBorderPadding().BStartEnd(myWM);
} // else, we'll figure out borderBoxBSize after we resolve contentBoxBSize.
nsIFrame* outerWrapperFrame = mOuterWrapper->GetPrimaryFrame();
if (!outerWrapperFrame) { // display:none?
if (contentBoxBSize == NS_INTRINSICSIZE) {
contentBoxBSize = 0;
borderBoxBSize =
aReflowInput.ComputedLogicalBorderPadding().BStartEnd(myWM);
}
} else {
NS_ASSERTION(outerWrapperFrame == mFrames.FirstChild(), "huh?");
ReflowOutput wrappersDesiredSize(aReflowInput);
WritingMode wrapperWM = outerWrapperFrame->GetWritingMode();
LogicalSize availSize = aReflowInput.ComputedSize(wrapperWM);
availSize.BSize(wrapperWM) = NS_UNCONSTRAINEDSIZE;
ReflowInput wrapperReflowInput(aPresContext, aReflowInput,
outerWrapperFrame, availSize);
// Convert wrapper margin into my own writing-mode (in case it differs):
LogicalMargin wrapperMargin =
wrapperReflowInput.ComputedLogicalMargin().ConvertTo(myWM, wrapperWM);
// offsets of wrapper frame within this frame:
LogicalPoint
wrapperOffset(myWM,
aReflowInput.ComputedLogicalBorderPadding().IStart(myWM) +
wrapperMargin.IStart(myWM),
aReflowInput.ComputedLogicalBorderPadding().BStart(myWM) +
wrapperMargin.BStart(myWM));
nsReflowStatus childStatus;
// We initially reflow the child with a dummy containerSize; positioning
// will be fixed later.
const nsSize dummyContainerSize;
ReflowChild(outerWrapperFrame, aPresContext, wrappersDesiredSize,
wrapperReflowInput, myWM, wrapperOffset, dummyContainerSize, 0,
childStatus);
MOZ_ASSERT(NS_FRAME_IS_FULLY_COMPLETE(childStatus),
"We gave our child unconstrained available block-size, "
"so it should be complete");
nscoord wrappersMarginBoxBSize =
wrappersDesiredSize.BSize(myWM) + wrapperMargin.BStartEnd(myWM);
if (contentBoxBSize == NS_INTRINSICSIZE) {
// We are intrinsically sized -- we should shrinkwrap the outer wrapper's
// block-size:
contentBoxBSize = wrappersMarginBoxBSize;
// Make sure we obey min/max-bsize in the case when we're doing intrinsic
// sizing (we get it for free when we have a non-intrinsic
// aReflowInput.ComputedBSize()). Note that we do this before
// adjusting for borderpadding, since ComputedMaxBSize and
// ComputedMinBSize are content heights.
contentBoxBSize =
NS_CSS_MINMAX(contentBoxBSize,
aReflowInput.ComputedMinBSize(),
aReflowInput.ComputedMaxBSize());
borderBoxBSize = contentBoxBSize +
aReflowInput.ComputedLogicalBorderPadding().BStartEnd(myWM);
}
// Center child in block axis
nscoord extraSpace = contentBoxBSize - wrappersMarginBoxBSize;
wrapperOffset.B(myWM) += std::max(0, extraSpace / 2);
// Needed in FinishReflowChild, for logical-to-physical conversion:
nsSize borderBoxSize = LogicalSize(myWM, borderBoxISize, borderBoxBSize).
GetPhysicalSize(myWM);
// Place the child
FinishReflowChild(outerWrapperFrame, aPresContext, wrappersDesiredSize,
&wrapperReflowInput, myWM, wrapperOffset,
borderBoxSize, 0);
nsSize contentBoxSize =
LogicalSize(myWM, contentBoxISize, contentBoxBSize).
GetPhysicalSize(myWM);
aDesiredSize.SetBlockStartAscent(
wrappersDesiredSize.BlockStartAscent() +
outerWrapperFrame->BStart(aReflowInput.GetWritingMode(),
contentBoxSize));
}
LogicalSize logicalDesiredSize(myWM, borderBoxISize, borderBoxBSize);
aDesiredSize.SetSize(myWM, logicalDesiredSize);
aDesiredSize.SetOverflowAreasToDesiredBounds();
if (outerWrapperFrame) {
ConsiderChildOverflow(aDesiredSize.mOverflowAreas, outerWrapperFrame);
}
FinishAndStoreOverflow(&aDesiredSize);
aStatus = NS_FRAME_COMPLETE;
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aDesiredSize);
}
void
nsVideoFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aMetrics,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsVideoFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aMetrics, aStatus);
NS_FRAME_TRACE(NS_FRAME_TRACE_CALLS,
("enter nsVideoFrame::Reflow: availSize=%d,%d",
aReflowInput.AvailableWidth(),
aReflowInput.AvailableHeight()));
NS_PRECONDITION(mState & NS_FRAME_IN_REFLOW, "frame is not in reflow");
aStatus = NS_FRAME_COMPLETE;
const WritingMode myWM = aReflowInput.GetWritingMode();
nscoord contentBoxBSize = aReflowInput.ComputedBSize();
const nscoord borderBoxISize = aReflowInput.ComputedISize() +
aReflowInput.ComputedLogicalBorderPadding().IStartEnd(myWM);
const bool isBSizeShrinkWrapping = (contentBoxBSize == NS_INTRINSICSIZE);
nscoord borderBoxBSize;
if (!isBSizeShrinkWrapping) {
borderBoxBSize = contentBoxBSize +
aReflowInput.ComputedLogicalBorderPadding().BStartEnd(myWM);
}
nsMargin borderPadding = aReflowInput.ComputedPhysicalBorderPadding();
// Reflow the child frames. We may have up to three: an image
// frame (for the poster image), a container frame for the controls,
// and a container frame for the caption.
for (nsIFrame* child : mFrames) {
nsSize oldChildSize = child->GetSize();
if (child->GetContent() == mPosterImage) {
// Reflow the poster frame.
nsImageFrame* imageFrame = static_cast<nsImageFrame*>(child);
ReflowOutput kidDesiredSize(aReflowInput);
WritingMode wm = imageFrame->GetWritingMode();
LogicalSize availableSize = aReflowInput.AvailableSize(wm);
LogicalSize cbSize = aMetrics.Size(aMetrics.GetWritingMode()).
ConvertTo(wm, aMetrics.GetWritingMode());
ReflowInput kidReflowInput(aPresContext,
aReflowInput,
imageFrame,
availableSize,
&cbSize);
nsRect posterRenderRect;
if (ShouldDisplayPoster()) {
posterRenderRect =
nsRect(nsPoint(borderPadding.left, borderPadding.top),
nsSize(aReflowInput.ComputedWidth(),
aReflowInput.ComputedHeight()));
}
kidReflowInput.SetComputedWidth(posterRenderRect.width);
kidReflowInput.SetComputedHeight(posterRenderRect.height);
ReflowChild(imageFrame, aPresContext, kidDesiredSize, kidReflowInput,
posterRenderRect.x, posterRenderRect.y, 0, aStatus);
FinishReflowChild(imageFrame, aPresContext,
kidDesiredSize, &kidReflowInput,
posterRenderRect.x, posterRenderRect.y, 0);
// Android still uses XUL media controls & hence needs this XUL-friendly
// custom reflow code. This will go away in bug 1310907.
#ifdef ANDROID
} else if (child->GetContent() == mVideoControls) {
// Reflow the video controls frame.
nsBoxLayoutState boxState(PresContext(), aReflowInput.mRenderingContext);
nsBoxFrame::LayoutChildAt(boxState,
child,
nsRect(borderPadding.left,
borderPadding.top,
aReflowInput.ComputedWidth(),
aReflowInput.ComputedHeight()));
#endif // ANDROID
} else if (child->GetContent() == mCaptionDiv ||
child->GetContent() == mVideoControls) {
// Reflow the caption and control bar frames.
WritingMode wm = child->GetWritingMode();
LogicalSize availableSize = aReflowInput.ComputedSize(wm);
availableSize.BSize(wm) = NS_UNCONSTRAINEDSIZE;
ReflowInput kidReflowInput(aPresContext,
aReflowInput,
child,
availableSize);
ReflowOutput kidDesiredSize(kidReflowInput);
ReflowChild(child, aPresContext, kidDesiredSize, kidReflowInput,
borderPadding.left, borderPadding.top, 0, aStatus);
if (child->GetContent() == mVideoControls && isBSizeShrinkWrapping) {
// Resolve our own BSize based on the controls' size in the same axis.
contentBoxBSize = myWM.IsOrthogonalTo(wm) ?
kidDesiredSize.ISize(wm) : kidDesiredSize.BSize(wm);
}
FinishReflowChild(child, aPresContext,
kidDesiredSize, &kidReflowInput,
borderPadding.left, borderPadding.top, 0);
}
if (child->GetContent() == mVideoControls && child->GetSize() != oldChildSize) {
RefPtr<Runnable> event = new DispatchResizeToControls(child->GetContent());
nsContentUtils::AddScriptRunner(event);
}
}
if (isBSizeShrinkWrapping) {
if (contentBoxBSize == NS_INTRINSICSIZE) {
// We didn't get a BSize from our intrinsic size/ratio, nor did we
// get one from our controls. Just use BSize of 0.
contentBoxBSize = 0;
}
contentBoxBSize = NS_CSS_MINMAX(contentBoxBSize,
aReflowInput.ComputedMinBSize(),
aReflowInput.ComputedMaxBSize());
borderBoxBSize = contentBoxBSize +
aReflowInput.ComputedLogicalBorderPadding().BStartEnd(myWM);
}
LogicalSize logicalDesiredSize(myWM, borderBoxISize, borderBoxBSize);
aMetrics.SetSize(myWM, logicalDesiredSize);
aMetrics.SetOverflowAreasToDesiredBounds();
FinishAndStoreOverflow(&aMetrics);
NS_FRAME_TRACE(NS_FRAME_TRACE_CALLS,
("exit nsVideoFrame::Reflow: size=%d,%d",
aMetrics.Width(), aMetrics.Height()));
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aMetrics);
}
void
nsFieldSetFrame::Reflow(nsPresContext* aPresContext,
ReflowOutput& aDesiredSize,
const ReflowInput& aReflowInput,
nsReflowStatus& aStatus)
{
MarkInReflow();
DO_GLOBAL_REFLOW_COUNT("nsFieldSetFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus);
NS_PRECONDITION(aReflowInput.ComputedISize() != NS_INTRINSICSIZE,
"Should have a precomputed inline-size!");
// Initialize OUT parameter
aStatus = NS_FRAME_COMPLETE;
nsOverflowAreas ocBounds;
nsReflowStatus ocStatus = NS_FRAME_COMPLETE;
if (GetPrevInFlow()) {
ReflowOverflowContainerChildren(aPresContext, aReflowInput, ocBounds, 0,
ocStatus);
}
//------------ Handle Incremental Reflow -----------------
bool reflowInner;
bool reflowLegend;
nsIFrame* legend = GetLegend();
nsIFrame* inner = GetInner();
if (aReflowInput.ShouldReflowAllKids()) {
reflowInner = inner != nullptr;
reflowLegend = legend != nullptr;
} else {
reflowInner = inner && NS_SUBTREE_DIRTY(inner);
reflowLegend = legend && NS_SUBTREE_DIRTY(legend);
}
// We don't allow fieldsets to break vertically. If we did, we'd
// need logic here to push and pull overflow frames.
// Since we're not applying our padding in this frame, we need to add it here
// to compute the available width for our children.
WritingMode wm = GetWritingMode();
WritingMode innerWM = inner ? inner->GetWritingMode() : wm;
WritingMode legendWM = legend ? legend->GetWritingMode() : wm;
LogicalSize innerAvailSize = aReflowInput.ComputedSizeWithPadding(innerWM);
LogicalSize legendAvailSize = aReflowInput.ComputedSizeWithPadding(legendWM);
innerAvailSize.BSize(innerWM) = legendAvailSize.BSize(legendWM) =
NS_UNCONSTRAINEDSIZE;
NS_ASSERTION(!inner ||
nsLayoutUtils::IntrinsicForContainer(aReflowInput.mRenderingContext,
inner,
nsLayoutUtils::MIN_ISIZE) <=
innerAvailSize.ISize(innerWM),
"Bogus availSize.ISize; should be bigger");
NS_ASSERTION(!legend ||
nsLayoutUtils::IntrinsicForContainer(aReflowInput.mRenderingContext,
legend,
nsLayoutUtils::MIN_ISIZE) <=
legendAvailSize.ISize(legendWM),
"Bogus availSize.ISize; should be bigger");
// get our border and padding
LogicalMargin border = aReflowInput.ComputedLogicalBorderPadding() -
aReflowInput.ComputedLogicalPadding();
// Figure out how big the legend is if there is one.
// get the legend's margin
LogicalMargin legendMargin(wm);
// reflow the legend only if needed
Maybe<ReflowInput> legendReflowInput;
if (legend) {
legendReflowInput.emplace(aPresContext, aReflowInput, legend,
legendAvailSize);
}
if (reflowLegend) {
ReflowOutput legendDesiredSize(aReflowInput);
// We'll move the legend to its proper place later, so the position
// and containerSize passed here are unimportant.
const nsSize dummyContainerSize;
ReflowChild(legend, aPresContext, legendDesiredSize, *legendReflowInput,
wm, LogicalPoint(wm), dummyContainerSize,
NS_FRAME_NO_MOVE_FRAME, aStatus);
#ifdef NOISY_REFLOW
printf(" returned (%d, %d)\n",
legendDesiredSize.Width(), legendDesiredSize.Height());
#endif
// figure out the legend's rectangle
legendMargin = legend->GetLogicalUsedMargin(wm);
mLegendRect =
LogicalRect(wm, 0, 0,
legendDesiredSize.ISize(wm) + legendMargin.IStartEnd(wm),
legendDesiredSize.BSize(wm) + legendMargin.BStartEnd(wm));
nscoord oldSpace = mLegendSpace;
mLegendSpace = 0;
if (mLegendRect.BSize(wm) > border.BStart(wm)) {
// center the border on the legend
mLegendSpace = mLegendRect.BSize(wm) - border.BStart(wm);
} else {
mLegendRect.BStart(wm) =
(border.BStart(wm) - mLegendRect.BSize(wm)) / 2;
}
// if the legend space changes then we need to reflow the
// content area as well.
if (mLegendSpace != oldSpace && inner) {
reflowInner = true;
}
FinishReflowChild(legend, aPresContext, legendDesiredSize,
legendReflowInput.ptr(), wm, LogicalPoint(wm),
dummyContainerSize, NS_FRAME_NO_MOVE_FRAME);
} else if (!legend) {
mLegendRect.SetEmpty();
mLegendSpace = 0;
} else {
// mLegendSpace and mLegendRect haven't changed, but we need
// the used margin when placing the legend.
legendMargin = legend->GetLogicalUsedMargin(wm);
}
// This containerSize is incomplete as yet: it does not include the size
// of the |inner| frame itself.
nsSize containerSize = (LogicalSize(wm, 0, mLegendSpace) +
border.Size(wm)).GetPhysicalSize(wm);
// reflow the content frame only if needed
if (reflowInner) {
ReflowInput kidReflowInput(aPresContext, aReflowInput, inner,
innerAvailSize, nullptr,
ReflowInput::CALLER_WILL_INIT);
// Override computed padding, in case it's percentage padding
kidReflowInput.Init(aPresContext, nullptr, nullptr,
&aReflowInput.ComputedPhysicalPadding());
// Our child is "height:100%" but we actually want its height to be reduced
// by the amount of content-height the legend is eating up, unless our
// height is unconstrained (in which case the child's will be too).
if (aReflowInput.ComputedBSize() != NS_UNCONSTRAINEDSIZE) {
kidReflowInput.SetComputedBSize(
std::max(0, aReflowInput.ComputedBSize() - mLegendSpace));
}
if (aReflowInput.ComputedMinBSize() > 0) {
kidReflowInput.ComputedMinBSize() =
std::max(0, aReflowInput.ComputedMinBSize() - mLegendSpace);
}
if (aReflowInput.ComputedMaxBSize() != NS_UNCONSTRAINEDSIZE) {
kidReflowInput.ComputedMaxBSize() =
std::max(0, aReflowInput.ComputedMaxBSize() - mLegendSpace);
}
ReflowOutput kidDesiredSize(kidReflowInput,
aDesiredSize.mFlags);
// Reflow the frame
NS_ASSERTION(kidReflowInput.ComputedPhysicalMargin() == nsMargin(0,0,0,0),
"Margins on anonymous fieldset child not supported!");
LogicalPoint pt(wm, border.IStart(wm), border.BStart(wm) + mLegendSpace);
// We don't know the correct containerSize until we have reflowed |inner|,
// so we use a dummy value for now; FinishReflowChild will fix the position
// if necessary.
const nsSize dummyContainerSize;
ReflowChild(inner, aPresContext, kidDesiredSize, kidReflowInput,
wm, pt, dummyContainerSize, 0, aStatus);
// Update containerSize to account for size of the inner frame, so that
// FinishReflowChild can position it correctly.
containerSize += kidDesiredSize.PhysicalSize();
FinishReflowChild(inner, aPresContext, kidDesiredSize,
&kidReflowInput, wm, pt, containerSize, 0);
NS_FRAME_TRACE_REFLOW_OUT("FieldSet::Reflow", aStatus);
} else if (inner) {
// |inner| didn't need to be reflowed but we do need to include its size
// in containerSize.
containerSize += inner->GetSize();
}
LogicalRect contentRect(wm);
if (inner) {
// We don't support margins on inner, so our content rect is just the
// inner's border-box. (We don't really care about container size at this
// point, as we'll figure out the actual positioning later.)
contentRect = inner->GetLogicalRect(wm, containerSize);
}
// Our content rect must fill up the available width
LogicalSize availSize = aReflowInput.ComputedSizeWithPadding(wm);
if (availSize.ISize(wm) > contentRect.ISize(wm)) {
contentRect.ISize(wm) = innerAvailSize.ISize(wm);
}
if (legend) {
// The legend is positioned inline-wards within the inner's content rect
// (so that padding on the fieldset affects the legend position).
LogicalRect innerContentRect = contentRect;
innerContentRect.Deflate(wm, aReflowInput.ComputedLogicalPadding());
// If the inner content rect is larger than the legend, we can align the
// legend.
if (innerContentRect.ISize(wm) > mLegendRect.ISize(wm)) {
// NOTE legend @align values are: left/right/center/top/bottom.
// GetLogicalAlign converts left/right to start/end for the given WM.
// @see HTMLLegendElement::ParseAttribute, nsLegendFrame::GetLogicalAlign
int32_t align = static_cast<nsLegendFrame*>
(legend->GetContentInsertionFrame())->GetLogicalAlign(wm);
switch (align) {
case NS_STYLE_TEXT_ALIGN_END:
mLegendRect.IStart(wm) =
innerContentRect.IEnd(wm) - mLegendRect.ISize(wm);
break;
case NS_STYLE_TEXT_ALIGN_CENTER:
// Note: rounding removed; there doesn't seem to be any need
mLegendRect.IStart(wm) = innerContentRect.IStart(wm) +
(innerContentRect.ISize(wm) - mLegendRect.ISize(wm)) / 2;
break;
case NS_STYLE_TEXT_ALIGN_START:
case NS_STYLE_VERTICAL_ALIGN_TOP:
case NS_STYLE_VERTICAL_ALIGN_BOTTOM:
mLegendRect.IStart(wm) = innerContentRect.IStart(wm);
break;
default:
MOZ_ASSERT_UNREACHABLE("unexpected GetLogicalAlign value");
}
} else {
// otherwise make place for the legend
mLegendRect.IStart(wm) = innerContentRect.IStart(wm);
innerContentRect.ISize(wm) = mLegendRect.ISize(wm);
contentRect.ISize(wm) = mLegendRect.ISize(wm) +
aReflowInput.ComputedLogicalPadding().IStartEnd(wm);
}
// place the legend
LogicalRect actualLegendRect = mLegendRect;
actualLegendRect.Deflate(wm, legendMargin);
LogicalPoint actualLegendPos(actualLegendRect.Origin(wm));
// Note that legend's writing mode may be different from the fieldset's,
// so we need to convert offsets before applying them to it (bug 1134534).
LogicalMargin offsets =
legendReflowInput->ComputedLogicalOffsets().
ConvertTo(wm, legendReflowInput->GetWritingMode());
ReflowInput::ApplyRelativePositioning(legend, wm, offsets,
&actualLegendPos,
containerSize);
legend->SetPosition(wm, actualLegendPos, containerSize);
nsContainerFrame::PositionFrameView(legend);
nsContainerFrame::PositionChildViews(legend);
}
// Return our size and our result.
LogicalSize finalSize(wm, contentRect.ISize(wm) + border.IStartEnd(wm),
mLegendSpace + border.BStartEnd(wm) +
(inner ? inner->BSize(wm) : 0));
aDesiredSize.SetSize(wm, finalSize);
aDesiredSize.SetOverflowAreasToDesiredBounds();
if (legend) {
ConsiderChildOverflow(aDesiredSize.mOverflowAreas, legend);
}
if (inner) {
ConsiderChildOverflow(aDesiredSize.mOverflowAreas, inner);
}
// Merge overflow container bounds and status.
aDesiredSize.mOverflowAreas.UnionWith(ocBounds);
NS_MergeReflowStatusInto(&aStatus, ocStatus);
FinishReflowWithAbsoluteFrames(aPresContext, aDesiredSize, aReflowInput, aStatus);
InvalidateFrame();
NS_FRAME_SET_TRUNCATION(aStatus, aReflowInput, aDesiredSize);
}
void
nsHTMLButtonControlFrame::ReflowButtonContents(nsPresContext* aPresContext,
ReflowOutput& aButtonDesiredSize,
const ReflowInput& aButtonReflowInput,
nsIFrame* aFirstKid)
{
WritingMode wm = GetWritingMode();
LogicalSize availSize = aButtonReflowInput.ComputedSize(wm);
availSize.BSize(wm) = NS_INTRINSICSIZE;
// Buttons have some bonus renderer-determined border/padding,
// which occupies part of the button's content-box area:
LogicalMargin focusPadding =
LogicalMargin(wm, mRenderer.GetAddedButtonBorderAndPadding());
// See whether out availSize's inline-size is big enough. If it's
// smaller than our intrinsic min iSize, that means that the kid
// wouldn't really fit. In that case, we overflow into our internal
// focuspadding (which other browsers don't have) so that there's a
// little more space for it.
// Note that GetMinISize includes the focusPadding.
nscoord IOverflow = GetMinISize(aButtonReflowInput.mRenderingContext) -
aButtonReflowInput.ComputedISize();
nscoord IFocusPadding = focusPadding.IStartEnd(wm);
nscoord focusPaddingReduction = std::min(IFocusPadding,
std::max(IOverflow, 0));
if (focusPaddingReduction > 0) {
nscoord startReduction = focusPadding.IStart(wm);
if (focusPaddingReduction != IFocusPadding) {
startReduction = NSToCoordRound(startReduction *
(float(focusPaddingReduction) /
float(IFocusPadding)));
}
focusPadding.IStart(wm) -= startReduction;
focusPadding.IEnd(wm) -= focusPaddingReduction - startReduction;
}
// shorthand for a value we need to use in a bunch of places
const LogicalMargin& clbp = aButtonReflowInput.ComputedLogicalBorderPadding();
// Indent the child inside us by the focus border. We must do this separate
// from the regular border.
availSize.ISize(wm) -= focusPadding.IStartEnd(wm);
LogicalPoint childPos(wm);
childPos.I(wm) = focusPadding.IStart(wm) + clbp.IStart(wm);
availSize.ISize(wm) = std::max(availSize.ISize(wm), 0);
// Give child a clone of the button's reflow state, with height/width reduced
// by focusPadding, so that descendants with height:100% don't protrude.
ReflowInput adjustedButtonReflowInput =
CloneReflowInputWithReducedContentBox(aButtonReflowInput, focusPadding);
ReflowInput contentsReflowInput(aPresContext,
adjustedButtonReflowInput,
aFirstKid, availSize);
nsReflowStatus contentsReflowStatus;
ReflowOutput contentsDesiredSize(aButtonReflowInput);
childPos.B(wm) = 0; // This will be set properly later, after reflowing the
// child to determine its size.
// We just pass a dummy containerSize here, as the child will be
// repositioned later by FinishReflowChild.
nsSize dummyContainerSize;
ReflowChild(aFirstKid, aPresContext,
contentsDesiredSize, contentsReflowInput,
wm, childPos, dummyContainerSize, 0, contentsReflowStatus);
MOZ_ASSERT(NS_FRAME_IS_COMPLETE(contentsReflowStatus),
"We gave button-contents frame unconstrained available height, "
"so it should be complete");
// Compute the button's content-box size:
LogicalSize buttonContentBox(wm);
if (aButtonReflowInput.ComputedBSize() != NS_INTRINSICSIZE) {
// Button has a fixed block-size -- that's its content-box bSize.
buttonContentBox.BSize(wm) = aButtonReflowInput.ComputedBSize();
} else {
// Button is intrinsically sized -- it should shrinkwrap the
// button-contents' bSize, plus any focus-padding space:
buttonContentBox.BSize(wm) =
contentsDesiredSize.BSize(wm) + focusPadding.BStartEnd(wm);
// Make sure we obey min/max-bSize in the case when we're doing intrinsic
// sizing (we get it for free when we have a non-intrinsic
// aButtonReflowInput.ComputedBSize()). Note that we do this before
// adjusting for borderpadding, since mComputedMaxBSize and
// mComputedMinBSize are content bSizes.
buttonContentBox.BSize(wm) =
NS_CSS_MINMAX(buttonContentBox.BSize(wm),
aButtonReflowInput.ComputedMinBSize(),
aButtonReflowInput.ComputedMaxBSize());
}
if (aButtonReflowInput.ComputedISize() != NS_INTRINSICSIZE) {
buttonContentBox.ISize(wm) = aButtonReflowInput.ComputedISize();
} else {
buttonContentBox.ISize(wm) =
contentsDesiredSize.ISize(wm) + focusPadding.IStartEnd(wm);
buttonContentBox.ISize(wm) =
NS_CSS_MINMAX(buttonContentBox.ISize(wm),
aButtonReflowInput.ComputedMinISize(),
aButtonReflowInput.ComputedMaxISize());
}
// Center child in the block-direction in the button
// (technically, inside of the button's focus-padding area)
nscoord extraSpace =
buttonContentBox.BSize(wm) - focusPadding.BStartEnd(wm) -
contentsDesiredSize.BSize(wm);
childPos.B(wm) = std::max(0, extraSpace / 2);
// Adjust childPos.B() to be in terms of the button's frame-rect, instead of
// its focus-padding rect:
childPos.B(wm) += focusPadding.BStart(wm) + clbp.BStart(wm);
nsSize containerSize =
(buttonContentBox + clbp.Size(wm)).GetPhysicalSize(wm);
// Place the child
FinishReflowChild(aFirstKid, aPresContext,
contentsDesiredSize, &contentsReflowInput,
wm, childPos, containerSize, 0);
// Make sure we have a useful 'ascent' value for the child
if (contentsDesiredSize.BlockStartAscent() ==
ReflowOutput::ASK_FOR_BASELINE) {
WritingMode wm = aButtonReflowInput.GetWritingMode();
contentsDesiredSize.SetBlockStartAscent(aFirstKid->GetLogicalBaseline(wm));
}
// OK, we're done with the child frame.
// Use what we learned to populate the button frame's reflow metrics.
// * Button's height & width are content-box size + border-box contribution:
aButtonDesiredSize.SetSize(wm,
LogicalSize(wm, aButtonReflowInput.ComputedISize() + clbp.IStartEnd(wm),
buttonContentBox.BSize(wm) + clbp.BStartEnd(wm)));
// * Button's ascent is its child's ascent, plus the child's block-offset
// within our frame... unless it's orthogonal, in which case we'll use the
// contents inline-size as an approximation for now.
// XXX is there a better strategy? should we include border-padding?
if (aButtonDesiredSize.GetWritingMode().IsOrthogonalTo(wm)) {
aButtonDesiredSize.SetBlockStartAscent(contentsDesiredSize.ISize(wm));
} else {
aButtonDesiredSize.SetBlockStartAscent(contentsDesiredSize.BlockStartAscent() +
childPos.B(wm));
}
aButtonDesiredSize.SetOverflowAreasToDesiredBounds();
}