/// zeroExtend - Return a new range in the specified integer type, which must
/// be strictly larger than the current type. The returned range will
/// correspond to the possible range of values as if the source range had been
/// zero extended.
ConstantRange ConstantRange::zeroExtend(uint32_t DstTySize) const {
unsigned SrcTySize = getBitWidth();
assert(SrcTySize < DstTySize && "Not a value extension");
if (isFullSet())
// Change a source full set into [0, 1 << 8*numbytes)
return ConstantRange(APInt(DstTySize,0), APInt(DstTySize,1).shl(SrcTySize));
APInt L = Lower; L.zext(DstTySize);
APInt U = Upper; U.zext(DstTySize);
return ConstantRange(L, U);
}
APInt swift::constantFoldCast(APInt val, const BuiltinInfo &BI) {
// Get the cast result.
Type SrcTy = BI.Types[0];
Type DestTy = BI.Types.size() == 2 ? BI.Types[1] : Type();
uint32_t SrcBitWidth =
SrcTy->castTo<BuiltinIntegerType>()->getGreatestWidth();
uint32_t DestBitWidth =
DestTy->castTo<BuiltinIntegerType>()->getGreatestWidth();
APInt CastResV;
if (SrcBitWidth == DestBitWidth) {
return val;
} else switch (BI.ID) {
default : llvm_unreachable("Invalid case.");
case BuiltinValueKind::Trunc:
case BuiltinValueKind::TruncOrBitCast:
return val.trunc(DestBitWidth);
case BuiltinValueKind::ZExt:
case BuiltinValueKind::ZExtOrBitCast:
return val.zext(DestBitWidth);
break;
case BuiltinValueKind::SExt:
case BuiltinValueKind::SExtOrBitCast:
return val.sext(DestBitWidth);
}
}
/// MultiplyOverflows - True if the multiply can not be expressed in an int
/// this size.
static bool MultiplyOverflows(ConstantInt *C1, ConstantInt *C2, bool sign) {
uint32_t W = C1->getBitWidth();
APInt LHSExt = C1->getValue(), RHSExt = C2->getValue();
if (sign) {
LHSExt = LHSExt.sext(W * 2);
RHSExt = RHSExt.sext(W * 2);
} else {
LHSExt = LHSExt.zext(W * 2);
RHSExt = RHSExt.zext(W * 2);
}
APInt MulExt = LHSExt * RHSExt;
if (!sign)
return MulExt.ugt(APInt::getLowBitsSet(W * 2, W));
APInt Min = APInt::getSignedMinValue(W).sext(W * 2);
APInt Max = APInt::getSignedMaxValue(W).sext(W * 2);
return MulExt.slt(Min) || MulExt.sgt(Max);
}
void BDCE::determineLiveOperandBits(const Instruction *UserI,
const Instruction *I, unsigned OperandNo,
const APInt &AOut, APInt &AB,
APInt &KnownZero, APInt &KnownOne,
APInt &KnownZero2, APInt &KnownOne2) {
unsigned BitWidth = AB.getBitWidth();
// We're called once per operand, but for some instructions, we need to
// compute known bits of both operands in order to determine the live bits of
// either (when both operands are instructions themselves). We don't,
// however, want to do this twice, so we cache the result in APInts that live
// in the caller. For the two-relevant-operands case, both operand values are
// provided here.
auto ComputeKnownBits =
[&](unsigned BitWidth, const Value *V1, const Value *V2) {
const DataLayout &DL = I->getModule()->getDataLayout();
KnownZero = APInt(BitWidth, 0);
KnownOne = APInt(BitWidth, 0);
computeKnownBits(const_cast<Value *>(V1), KnownZero, KnownOne, DL, 0,
AC, UserI, DT);
if (V2) {
KnownZero2 = APInt(BitWidth, 0);
KnownOne2 = APInt(BitWidth, 0);
computeKnownBits(const_cast<Value *>(V2), KnownZero2, KnownOne2, DL,
0, AC, UserI, DT);
}
};
switch (UserI->getOpcode()) {
default: break;
case Instruction::Call:
case Instruction::Invoke:
if (const IntrinsicInst *II = dyn_cast<IntrinsicInst>(UserI))
switch (II->getIntrinsicID()) {
default: break;
case Intrinsic::bswap:
// The alive bits of the input are the swapped alive bits of
// the output.
AB = AOut.byteSwap();
break;
case Intrinsic::ctlz:
if (OperandNo == 0) {
// We need some output bits, so we need all bits of the
// input to the left of, and including, the leftmost bit
// known to be one.
ComputeKnownBits(BitWidth, I, nullptr);
AB = APInt::getHighBitsSet(BitWidth,
std::min(BitWidth, KnownOne.countLeadingZeros()+1));
}
break;
case Intrinsic::cttz:
if (OperandNo == 0) {
// We need some output bits, so we need all bits of the
// input to the right of, and including, the rightmost bit
// known to be one.
ComputeKnownBits(BitWidth, I, nullptr);
AB = APInt::getLowBitsSet(BitWidth,
std::min(BitWidth, KnownOne.countTrailingZeros()+1));
}
break;
}
break;
case Instruction::Add:
case Instruction::Sub:
// Find the highest live output bit. We don't need any more input
// bits than that (adds, and thus subtracts, ripple only to the
// left).
AB = APInt::getLowBitsSet(BitWidth, AOut.getActiveBits());
break;
case Instruction::Shl:
if (OperandNo == 0)
if (ConstantInt *CI =
dyn_cast<ConstantInt>(UserI->getOperand(1))) {
uint64_t ShiftAmt = CI->getLimitedValue(BitWidth-1);
AB = AOut.lshr(ShiftAmt);
// If the shift is nuw/nsw, then the high bits are not dead
// (because we've promised that they *must* be zero).
const ShlOperator *S = cast<ShlOperator>(UserI);
if (S->hasNoSignedWrap())
AB |= APInt::getHighBitsSet(BitWidth, ShiftAmt+1);
else if (S->hasNoUnsignedWrap())
AB |= APInt::getHighBitsSet(BitWidth, ShiftAmt);
}
break;
case Instruction::LShr:
if (OperandNo == 0)
if (ConstantInt *CI =
dyn_cast<ConstantInt>(UserI->getOperand(1))) {
uint64_t ShiftAmt = CI->getLimitedValue(BitWidth-1);
AB = AOut.shl(ShiftAmt);
// If the shift is exact, then the low bits are not dead
// (they must be zero).
if (cast<LShrOperator>(UserI)->isExact())
AB |= APInt::getLowBitsSet(BitWidth, ShiftAmt);
}
break;
case Instruction::AShr:
if (OperandNo == 0)
if (ConstantInt *CI =
dyn_cast<ConstantInt>(UserI->getOperand(1))) {
uint64_t ShiftAmt = CI->getLimitedValue(BitWidth-1);
AB = AOut.shl(ShiftAmt);
// Because the high input bit is replicated into the
// high-order bits of the result, if we need any of those
// bits, then we must keep the highest input bit.
if ((AOut & APInt::getHighBitsSet(BitWidth, ShiftAmt))
.getBoolValue())
AB.setBit(BitWidth-1);
// If the shift is exact, then the low bits are not dead
// (they must be zero).
if (cast<AShrOperator>(UserI)->isExact())
AB |= APInt::getLowBitsSet(BitWidth, ShiftAmt);
}
break;
case Instruction::And:
AB = AOut;
// For bits that are known zero, the corresponding bits in the
// other operand are dead (unless they're both zero, in which
// case they can't both be dead, so just mark the LHS bits as
// dead).
if (OperandNo == 0) {
ComputeKnownBits(BitWidth, I, UserI->getOperand(1));
AB &= ~KnownZero2;
} else {
if (!isa<Instruction>(UserI->getOperand(0)))
ComputeKnownBits(BitWidth, UserI->getOperand(0), I);
AB &= ~(KnownZero & ~KnownZero2);
}
break;
case Instruction::Or:
AB = AOut;
// For bits that are known one, the corresponding bits in the
// other operand are dead (unless they're both one, in which
// case they can't both be dead, so just mark the LHS bits as
// dead).
if (OperandNo == 0) {
ComputeKnownBits(BitWidth, I, UserI->getOperand(1));
AB &= ~KnownOne2;
} else {
if (!isa<Instruction>(UserI->getOperand(0)))
ComputeKnownBits(BitWidth, UserI->getOperand(0), I);
AB &= ~(KnownOne & ~KnownOne2);
}
break;
case Instruction::Xor:
case Instruction::PHI:
AB = AOut;
break;
case Instruction::Trunc:
AB = AOut.zext(BitWidth);
break;
case Instruction::ZExt:
AB = AOut.trunc(BitWidth);
break;
case Instruction::SExt:
AB = AOut.trunc(BitWidth);
// Because the high input bit is replicated into the
// high-order bits of the result, if we need any of those
// bits, then we must keep the highest input bit.
if ((AOut & APInt::getHighBitsSet(AOut.getBitWidth(),
AOut.getBitWidth() - BitWidth))
.getBoolValue())
AB.setBit(BitWidth-1);
break;
case Instruction::Select:
if (OperandNo != 0)
AB = AOut;
break;
}
}
/// ComputeMaskedBits - Determine which of the bits specified in Mask are
/// known to be either zero or one and return them in the KnownZero/KnownOne
/// bit sets. This code only analyzes bits in Mask, in order to short-circuit
/// processing.
/// NOTE: we cannot consider 'undef' to be "IsZero" here. The problem is that
/// we cannot optimize based on the assumption that it is zero without changing
/// it to be an explicit zero. If we don't change it to zero, other code could
/// optimized based on the contradictory assumption that it is non-zero.
/// Because instcombine aggressively folds operations with undef args anyway,
/// this won't lose us code quality.
void llvm::ComputeMaskedBits(Value *V, const APInt &Mask,
APInt &KnownZero, APInt &KnownOne,
TargetData *TD, unsigned Depth) {
const unsigned MaxDepth = 6;
assert(V && "No Value?");
assert(Depth <= MaxDepth && "Limit Search Depth");
unsigned BitWidth = Mask.getBitWidth();
assert((V->getType()->isInteger() || isa<PointerType>(V->getType())) &&
"Not integer or pointer type!");
assert((!TD || TD->getTypeSizeInBits(V->getType()) == BitWidth) &&
(!isa<IntegerType>(V->getType()) ||
V->getType()->getPrimitiveSizeInBits() == BitWidth) &&
KnownZero.getBitWidth() == BitWidth &&
KnownOne.getBitWidth() == BitWidth &&
"V, Mask, KnownOne and KnownZero should have same BitWidth");
if (ConstantInt *CI = dyn_cast<ConstantInt>(V)) {
// We know all of the bits for a constant!
KnownOne = CI->getValue() & Mask;
KnownZero = ~KnownOne & Mask;
return;
}
// Null is all-zeros.
if (isa<ConstantPointerNull>(V)) {
KnownOne.clear();
KnownZero = Mask;
return;
}
// The address of an aligned GlobalValue has trailing zeros.
if (GlobalValue *GV = dyn_cast<GlobalValue>(V)) {
unsigned Align = GV->getAlignment();
if (Align == 0 && TD && GV->getType()->getElementType()->isSized())
Align = TD->getPrefTypeAlignment(GV->getType()->getElementType());
if (Align > 0)
KnownZero = Mask & APInt::getLowBitsSet(BitWidth,
CountTrailingZeros_32(Align));
else
KnownZero.clear();
KnownOne.clear();
return;
}
KnownZero.clear(); KnownOne.clear(); // Start out not knowing anything.
if (Depth == MaxDepth || Mask == 0)
return; // Limit search depth.
User *I = dyn_cast<User>(V);
if (!I) return;
APInt KnownZero2(KnownZero), KnownOne2(KnownOne);
switch (getOpcode(I)) {
default: break;
case Instruction::And: {
// If either the LHS or the RHS are Zero, the result is zero.
ComputeMaskedBits(I->getOperand(1), Mask, KnownZero, KnownOne, TD, Depth+1);
APInt Mask2(Mask & ~KnownZero);
ComputeMaskedBits(I->getOperand(0), Mask2, KnownZero2, KnownOne2, TD,
Depth+1);
assert((KnownZero & KnownOne) == 0 && "Bits known to be one AND zero?");
assert((KnownZero2 & KnownOne2) == 0 && "Bits known to be one AND zero?");
// Output known-1 bits are only known if set in both the LHS & RHS.
KnownOne &= KnownOne2;
// Output known-0 are known to be clear if zero in either the LHS | RHS.
KnownZero |= KnownZero2;
return;
}
case Instruction::Or: {
ComputeMaskedBits(I->getOperand(1), Mask, KnownZero, KnownOne, TD, Depth+1);
APInt Mask2(Mask & ~KnownOne);
ComputeMaskedBits(I->getOperand(0), Mask2, KnownZero2, KnownOne2, TD,
Depth+1);
assert((KnownZero & KnownOne) == 0 && "Bits known to be one AND zero?");
assert((KnownZero2 & KnownOne2) == 0 && "Bits known to be one AND zero?");
// Output known-0 bits are only known if clear in both the LHS & RHS.
KnownZero &= KnownZero2;
// Output known-1 are known to be set if set in either the LHS | RHS.
KnownOne |= KnownOne2;
return;
}
case Instruction::Xor: {
ComputeMaskedBits(I->getOperand(1), Mask, KnownZero, KnownOne, TD, Depth+1);
ComputeMaskedBits(I->getOperand(0), Mask, KnownZero2, KnownOne2, TD,
Depth+1);
assert((KnownZero & KnownOne) == 0 && "Bits known to be one AND zero?");
assert((KnownZero2 & KnownOne2) == 0 && "Bits known to be one AND zero?");
// Output known-0 bits are known if clear or set in both the LHS & RHS.
APInt KnownZeroOut = (KnownZero & KnownZero2) | (KnownOne & KnownOne2);
// Output known-1 are known to be set if set in only one of the LHS, RHS.
KnownOne = (KnownZero & KnownOne2) | (KnownOne & KnownZero2);
KnownZero = KnownZeroOut;
return;
}
case Instruction::Mul: {
APInt Mask2 = APInt::getAllOnesValue(BitWidth);
ComputeMaskedBits(I->getOperand(1), Mask2, KnownZero, KnownOne, TD,Depth+1);
ComputeMaskedBits(I->getOperand(0), Mask2, KnownZero2, KnownOne2, TD,
Depth+1);
assert((KnownZero & KnownOne) == 0 && "Bits known to be one AND zero?");
assert((KnownZero2 & KnownOne2) == 0 && "Bits known to be one AND zero?");
// If low bits are zero in either operand, output low known-0 bits.
// Also compute a conserative estimate for high known-0 bits.
// More trickiness is possible, but this is sufficient for the
// interesting case of alignment computation.
KnownOne.clear();
unsigned TrailZ = KnownZero.countTrailingOnes() +
KnownZero2.countTrailingOnes();
unsigned LeadZ = std::max(KnownZero.countLeadingOnes() +
KnownZero2.countLeadingOnes(),
BitWidth) - BitWidth;
TrailZ = std::min(TrailZ, BitWidth);
LeadZ = std::min(LeadZ, BitWidth);
KnownZero = APInt::getLowBitsSet(BitWidth, TrailZ) |
APInt::getHighBitsSet(BitWidth, LeadZ);
KnownZero &= Mask;
return;
}
case Instruction::UDiv: {
// For the purposes of computing leading zeros we can conservatively
// treat a udiv as a logical right shift by the power of 2 known to
// be less than the denominator.
APInt AllOnes = APInt::getAllOnesValue(BitWidth);
ComputeMaskedBits(I->getOperand(0),
AllOnes, KnownZero2, KnownOne2, TD, Depth+1);
unsigned LeadZ = KnownZero2.countLeadingOnes();
KnownOne2.clear();
KnownZero2.clear();
ComputeMaskedBits(I->getOperand(1),
AllOnes, KnownZero2, KnownOne2, TD, Depth+1);
unsigned RHSUnknownLeadingOnes = KnownOne2.countLeadingZeros();
if (RHSUnknownLeadingOnes != BitWidth)
LeadZ = std::min(BitWidth,
LeadZ + BitWidth - RHSUnknownLeadingOnes - 1);
KnownZero = APInt::getHighBitsSet(BitWidth, LeadZ) & Mask;
return;
}
case Instruction::Select:
ComputeMaskedBits(I->getOperand(2), Mask, KnownZero, KnownOne, TD, Depth+1);
ComputeMaskedBits(I->getOperand(1), Mask, KnownZero2, KnownOne2, TD,
Depth+1);
assert((KnownZero & KnownOne) == 0 && "Bits known to be one AND zero?");
assert((KnownZero2 & KnownOne2) == 0 && "Bits known to be one AND zero?");
// Only known if known in both the LHS and RHS.
KnownOne &= KnownOne2;
KnownZero &= KnownZero2;
return;
case Instruction::FPTrunc:
case Instruction::FPExt:
case Instruction::FPToUI:
case Instruction::FPToSI:
case Instruction::SIToFP:
case Instruction::UIToFP:
return; // Can't work with floating point.
case Instruction::PtrToInt:
case Instruction::IntToPtr:
// We can't handle these if we don't know the pointer size.
if (!TD) return;
// FALL THROUGH and handle them the same as zext/trunc.
case Instruction::ZExt:
case Instruction::Trunc: {
// Note that we handle pointer operands here because of inttoptr/ptrtoint
// which fall through here.
const Type *SrcTy = I->getOperand(0)->getType();
unsigned SrcBitWidth = TD ?
TD->getTypeSizeInBits(SrcTy) :
SrcTy->getPrimitiveSizeInBits();
APInt MaskIn(Mask);
MaskIn.zextOrTrunc(SrcBitWidth);
KnownZero.zextOrTrunc(SrcBitWidth);
KnownOne.zextOrTrunc(SrcBitWidth);
ComputeMaskedBits(I->getOperand(0), MaskIn, KnownZero, KnownOne, TD,
Depth+1);
KnownZero.zextOrTrunc(BitWidth);
KnownOne.zextOrTrunc(BitWidth);
// Any top bits are known to be zero.
if (BitWidth > SrcBitWidth)
KnownZero |= APInt::getHighBitsSet(BitWidth, BitWidth - SrcBitWidth);
return;
}
case Instruction::BitCast: {
const Type *SrcTy = I->getOperand(0)->getType();
if (SrcTy->isInteger() || isa<PointerType>(SrcTy)) {
ComputeMaskedBits(I->getOperand(0), Mask, KnownZero, KnownOne, TD,
Depth+1);
return;
}
break;
}
case Instruction::SExt: {
// Compute the bits in the result that are not present in the input.
const IntegerType *SrcTy = cast<IntegerType>(I->getOperand(0)->getType());
unsigned SrcBitWidth = SrcTy->getBitWidth();
APInt MaskIn(Mask);
MaskIn.trunc(SrcBitWidth);
KnownZero.trunc(SrcBitWidth);
KnownOne.trunc(SrcBitWidth);
ComputeMaskedBits(I->getOperand(0), MaskIn, KnownZero, KnownOne, TD,
Depth+1);
assert((KnownZero & KnownOne) == 0 && "Bits known to be one AND zero?");
KnownZero.zext(BitWidth);
KnownOne.zext(BitWidth);
// If the sign bit of the input is known set or clear, then we know the
// top bits of the result.
if (KnownZero[SrcBitWidth-1]) // Input sign bit known zero
KnownZero |= APInt::getHighBitsSet(BitWidth, BitWidth - SrcBitWidth);
else if (KnownOne[SrcBitWidth-1]) // Input sign bit known set
KnownOne |= APInt::getHighBitsSet(BitWidth, BitWidth - SrcBitWidth);
return;
}
case Instruction::Shl:
// (shl X, C1) & C2 == 0 iff (X & C2 >>u C1) == 0
if (ConstantInt *SA = dyn_cast<ConstantInt>(I->getOperand(1))) {
uint64_t ShiftAmt = SA->getLimitedValue(BitWidth);
APInt Mask2(Mask.lshr(ShiftAmt));
ComputeMaskedBits(I->getOperand(0), Mask2, KnownZero, KnownOne, TD,
Depth+1);
assert((KnownZero & KnownOne) == 0 && "Bits known to be one AND zero?");
KnownZero <<= ShiftAmt;
KnownOne <<= ShiftAmt;
KnownZero |= APInt::getLowBitsSet(BitWidth, ShiftAmt); // low bits known 0
return;
}
break;
case Instruction::LShr:
// (ushr X, C1) & C2 == 0 iff (-1 >> C1) & C2 == 0
if (ConstantInt *SA = dyn_cast<ConstantInt>(I->getOperand(1))) {
// Compute the new bits that are at the top now.
uint64_t ShiftAmt = SA->getLimitedValue(BitWidth);
// Unsigned shift right.
APInt Mask2(Mask.shl(ShiftAmt));
ComputeMaskedBits(I->getOperand(0), Mask2, KnownZero,KnownOne, TD,
Depth+1);
assert((KnownZero & KnownOne) == 0&&"Bits known to be one AND zero?");
KnownZero = APIntOps::lshr(KnownZero, ShiftAmt);
KnownOne = APIntOps::lshr(KnownOne, ShiftAmt);
// high bits known zero.
KnownZero |= APInt::getHighBitsSet(BitWidth, ShiftAmt);
return;
}
break;
case Instruction::AShr:
// (ashr X, C1) & C2 == 0 iff (-1 >> C1) & C2 == 0
if (ConstantInt *SA = dyn_cast<ConstantInt>(I->getOperand(1))) {
// Compute the new bits that are at the top now.
uint64_t ShiftAmt = SA->getLimitedValue(BitWidth);
// Signed shift right.
APInt Mask2(Mask.shl(ShiftAmt));
ComputeMaskedBits(I->getOperand(0), Mask2, KnownZero, KnownOne, TD,
Depth+1);
assert((KnownZero & KnownOne) == 0&&"Bits known to be one AND zero?");
KnownZero = APIntOps::lshr(KnownZero, ShiftAmt);
KnownOne = APIntOps::lshr(KnownOne, ShiftAmt);
APInt HighBits(APInt::getHighBitsSet(BitWidth, ShiftAmt));
if (KnownZero[BitWidth-ShiftAmt-1]) // New bits are known zero.
KnownZero |= HighBits;
else if (KnownOne[BitWidth-ShiftAmt-1]) // New bits are known one.
KnownOne |= HighBits;
return;
}
break;
case Instruction::Sub: {
if (ConstantInt *CLHS = dyn_cast<ConstantInt>(I->getOperand(0))) {
// We know that the top bits of C-X are clear if X contains less bits
// than C (i.e. no wrap-around can happen). For example, 20-X is
// positive if we can prove that X is >= 0 and < 16.
if (!CLHS->getValue().isNegative()) {
unsigned NLZ = (CLHS->getValue()+1).countLeadingZeros();
// NLZ can't be BitWidth with no sign bit
APInt MaskV = APInt::getHighBitsSet(BitWidth, NLZ+1);
ComputeMaskedBits(I->getOperand(1), MaskV, KnownZero2, KnownOne2,
TD, Depth+1);
// If all of the MaskV bits are known to be zero, then we know the
// output top bits are zero, because we now know that the output is
// from [0-C].
if ((KnownZero2 & MaskV) == MaskV) {
unsigned NLZ2 = CLHS->getValue().countLeadingZeros();
// Top bits known zero.
KnownZero = APInt::getHighBitsSet(BitWidth, NLZ2) & Mask;
}
}
}
}
// fall through
case Instruction::Add: {
// If one of the operands has trailing zeros, than the bits that the
// other operand has in those bit positions will be preserved in the
// result. For an add, this works with either operand. For a subtract,
// this only works if the known zeros are in the right operand.
APInt LHSKnownZero(BitWidth, 0), LHSKnownOne(BitWidth, 0);
APInt Mask2 = APInt::getLowBitsSet(BitWidth,
BitWidth - Mask.countLeadingZeros());
ComputeMaskedBits(I->getOperand(0), Mask2, LHSKnownZero, LHSKnownOne, TD,
Depth+1);
assert((LHSKnownZero & LHSKnownOne) == 0 &&
"Bits known to be one AND zero?");
unsigned LHSKnownZeroOut = LHSKnownZero.countTrailingOnes();
ComputeMaskedBits(I->getOperand(1), Mask2, KnownZero2, KnownOne2, TD,
Depth+1);
assert((KnownZero2 & KnownOne2) == 0 && "Bits known to be one AND zero?");
unsigned RHSKnownZeroOut = KnownZero2.countTrailingOnes();
// Determine which operand has more trailing zeros, and use that
// many bits from the other operand.
if (LHSKnownZeroOut > RHSKnownZeroOut) {
if (getOpcode(I) == Instruction::Add) {
APInt Mask = APInt::getLowBitsSet(BitWidth, LHSKnownZeroOut);
KnownZero |= KnownZero2 & Mask;
KnownOne |= KnownOne2 & Mask;
} else {
// If the known zeros are in the left operand for a subtract,
// fall back to the minimum known zeros in both operands.
KnownZero |= APInt::getLowBitsSet(BitWidth,
std::min(LHSKnownZeroOut,
RHSKnownZeroOut));
}
} else if (RHSKnownZeroOut >= LHSKnownZeroOut) {
APInt Mask = APInt::getLowBitsSet(BitWidth, RHSKnownZeroOut);
KnownZero |= LHSKnownZero & Mask;
KnownOne |= LHSKnownOne & Mask;
}
return;
}
case Instruction::SRem:
if (ConstantInt *Rem = dyn_cast<ConstantInt>(I->getOperand(1))) {
APInt RA = Rem->getValue();
if (RA.isPowerOf2() || (-RA).isPowerOf2()) {
APInt LowBits = RA.isStrictlyPositive() ? (RA - 1) : ~RA;
APInt Mask2 = LowBits | APInt::getSignBit(BitWidth);
ComputeMaskedBits(I->getOperand(0), Mask2, KnownZero2, KnownOne2, TD,
Depth+1);
// If the sign bit of the first operand is zero, the sign bit of
// the result is zero. If the first operand has no one bits below
// the second operand's single 1 bit, its sign will be zero.
if (KnownZero2[BitWidth-1] || ((KnownZero2 & LowBits) == LowBits))
KnownZero2 |= ~LowBits;
KnownZero |= KnownZero2 & Mask;
assert((KnownZero & KnownOne) == 0&&"Bits known to be one AND zero?");
}
}
break;
case Instruction::URem: {
if (ConstantInt *Rem = dyn_cast<ConstantInt>(I->getOperand(1))) {
APInt RA = Rem->getValue();
if (RA.isPowerOf2()) {
APInt LowBits = (RA - 1);
APInt Mask2 = LowBits & Mask;
KnownZero |= ~LowBits & Mask;
ComputeMaskedBits(I->getOperand(0), Mask2, KnownZero, KnownOne, TD,
Depth+1);
assert((KnownZero & KnownOne) == 0&&"Bits known to be one AND zero?");
break;
}
}
// Since the result is less than or equal to either operand, any leading
// zero bits in either operand must also exist in the result.
APInt AllOnes = APInt::getAllOnesValue(BitWidth);
ComputeMaskedBits(I->getOperand(0), AllOnes, KnownZero, KnownOne,
TD, Depth+1);
ComputeMaskedBits(I->getOperand(1), AllOnes, KnownZero2, KnownOne2,
TD, Depth+1);
unsigned Leaders = std::max(KnownZero.countLeadingOnes(),
KnownZero2.countLeadingOnes());
KnownOne.clear();
KnownZero = APInt::getHighBitsSet(BitWidth, Leaders) & Mask;
break;
}
case Instruction::Alloca:
case Instruction::Malloc: {
AllocationInst *AI = cast<AllocationInst>(V);
unsigned Align = AI->getAlignment();
if (Align == 0 && TD) {
if (isa<AllocaInst>(AI))
Align = TD->getABITypeAlignment(AI->getType()->getElementType());
else if (isa<MallocInst>(AI)) {
// Malloc returns maximally aligned memory.
Align = TD->getABITypeAlignment(AI->getType()->getElementType());
Align =
std::max(Align,
(unsigned)TD->getABITypeAlignment(Type::DoubleTy));
Align =
std::max(Align,
(unsigned)TD->getABITypeAlignment(Type::Int64Ty));
}
}
if (Align > 0)
KnownZero = Mask & APInt::getLowBitsSet(BitWidth,
CountTrailingZeros_32(Align));
break;
}
case Instruction::GetElementPtr: {
// Analyze all of the subscripts of this getelementptr instruction
// to determine if we can prove known low zero bits.
APInt LocalMask = APInt::getAllOnesValue(BitWidth);
APInt LocalKnownZero(BitWidth, 0), LocalKnownOne(BitWidth, 0);
ComputeMaskedBits(I->getOperand(0), LocalMask,
LocalKnownZero, LocalKnownOne, TD, Depth+1);
unsigned TrailZ = LocalKnownZero.countTrailingOnes();
gep_type_iterator GTI = gep_type_begin(I);
for (unsigned i = 1, e = I->getNumOperands(); i != e; ++i, ++GTI) {
Value *Index = I->getOperand(i);
if (const StructType *STy = dyn_cast<StructType>(*GTI)) {
// Handle struct member offset arithmetic.
if (!TD) return;
const StructLayout *SL = TD->getStructLayout(STy);
unsigned Idx = cast<ConstantInt>(Index)->getZExtValue();
uint64_t Offset = SL->getElementOffset(Idx);
TrailZ = std::min(TrailZ,
CountTrailingZeros_64(Offset));
} else {
// Handle array index arithmetic.
const Type *IndexedTy = GTI.getIndexedType();
if (!IndexedTy->isSized()) return;
unsigned GEPOpiBits = Index->getType()->getPrimitiveSizeInBits();
uint64_t TypeSize = TD ? TD->getTypeAllocSize(IndexedTy) : 1;
LocalMask = APInt::getAllOnesValue(GEPOpiBits);
LocalKnownZero = LocalKnownOne = APInt(GEPOpiBits, 0);
ComputeMaskedBits(Index, LocalMask,
LocalKnownZero, LocalKnownOne, TD, Depth+1);
TrailZ = std::min(TrailZ,
unsigned(CountTrailingZeros_64(TypeSize) +
LocalKnownZero.countTrailingOnes()));
}
}
KnownZero = APInt::getLowBitsSet(BitWidth, TrailZ) & Mask;
break;
}
case Instruction::PHI: {
PHINode *P = cast<PHINode>(I);
// Handle the case of a simple two-predecessor recurrence PHI.
// There's a lot more that could theoretically be done here, but
// this is sufficient to catch some interesting cases.
if (P->getNumIncomingValues() == 2) {
for (unsigned i = 0; i != 2; ++i) {
Value *L = P->getIncomingValue(i);
Value *R = P->getIncomingValue(!i);
User *LU = dyn_cast<User>(L);
if (!LU)
continue;
unsigned Opcode = getOpcode(LU);
// Check for operations that have the property that if
// both their operands have low zero bits, the result
// will have low zero bits.
if (Opcode == Instruction::Add ||
Opcode == Instruction::Sub ||
Opcode == Instruction::And ||
Opcode == Instruction::Or ||
Opcode == Instruction::Mul) {
Value *LL = LU->getOperand(0);
Value *LR = LU->getOperand(1);
// Find a recurrence.
if (LL == I)
L = LR;
else if (LR == I)
L = LL;
else
break;
// Ok, we have a PHI of the form L op= R. Check for low
// zero bits.
APInt Mask2 = APInt::getAllOnesValue(BitWidth);
ComputeMaskedBits(R, Mask2, KnownZero2, KnownOne2, TD, Depth+1);
Mask2 = APInt::getLowBitsSet(BitWidth,
KnownZero2.countTrailingOnes());
// We need to take the minimum number of known bits
APInt KnownZero3(KnownZero), KnownOne3(KnownOne);
ComputeMaskedBits(L, Mask2, KnownZero3, KnownOne3, TD, Depth+1);
KnownZero = Mask &
APInt::getLowBitsSet(BitWidth,
std::min(KnownZero2.countTrailingOnes(),
KnownZero3.countTrailingOnes()));
break;
}
}
}
// Otherwise take the unions of the known bit sets of the operands,
// taking conservative care to avoid excessive recursion.
if (Depth < MaxDepth - 1 && !KnownZero && !KnownOne) {
KnownZero = APInt::getAllOnesValue(BitWidth);
KnownOne = APInt::getAllOnesValue(BitWidth);
for (unsigned i = 0, e = P->getNumIncomingValues(); i != e; ++i) {
// Skip direct self references.
if (P->getIncomingValue(i) == P) continue;
KnownZero2 = APInt(BitWidth, 0);
KnownOne2 = APInt(BitWidth, 0);
// Recurse, but cap the recursion to one level, because we don't
// want to waste time spinning around in loops.
ComputeMaskedBits(P->getIncomingValue(i), KnownZero | KnownOne,
KnownZero2, KnownOne2, TD, MaxDepth-1);
KnownZero &= KnownZero2;
KnownOne &= KnownOne2;
// If all bits have been ruled out, there's no need to check
// more operands.
if (!KnownZero && !KnownOne)
break;
}
}
break;
}
case Instruction::Call:
if (IntrinsicInst *II = dyn_cast<IntrinsicInst>(I)) {
switch (II->getIntrinsicID()) {
default: break;
case Intrinsic::ctpop:
case Intrinsic::ctlz:
case Intrinsic::cttz: {
unsigned LowBits = Log2_32(BitWidth)+1;
KnownZero = APInt::getHighBitsSet(BitWidth, BitWidth - LowBits);
break;
}
}
}
break;
}
}
SymbolicValue
ConstExprFunctionState::computeConstantValueBuiltin(BuiltinInst *inst) {
const BuiltinInfo &builtin = inst->getBuiltinInfo();
// Handle various cases in groups.
auto unknownResult = [&]() -> SymbolicValue {
return evaluator.getUnknown(SILValue(inst), UnknownReason::Default);
};
// Unary operations.
if (inst->getNumOperands() == 1) {
auto operand = getConstantValue(inst->getOperand(0));
// TODO: Could add a "value used here" sort of diagnostic.
if (!operand.isConstant())
return operand;
// TODO: SUCheckedConversion/USCheckedConversion
// Implement support for s_to_s_checked_trunc_Int2048_Int64 and other
// checking integer truncates. These produce a tuple of the result value
// and an overflow bit.
//
// TODO: We can/should diagnose statically detectable integer overflow
// errors and subsume the ConstantFolding.cpp mandatory SIL pass.
auto IntCheckedTruncFn = [&](bool srcSigned,
bool dstSigned) -> SymbolicValue {
if (operand.getKind() != SymbolicValue::Integer)
return unknownResult();
auto operandVal = operand.getIntegerValue();
uint32_t srcBitWidth = operandVal.getBitWidth();
auto dstBitWidth =
builtin.Types[1]->castTo<BuiltinIntegerType>()->getGreatestWidth();
APInt result = operandVal.trunc(dstBitWidth);
// Compute the overflow by re-extending the value back to its source and
// checking for loss of value.
APInt reextended =
dstSigned ? result.sext(srcBitWidth) : result.zext(srcBitWidth);
bool overflowed = (operandVal != reextended);
if (!srcSigned && dstSigned)
overflowed |= result.isSignBitSet();
if (overflowed)
return evaluator.getUnknown(SILValue(inst), UnknownReason::Overflow);
auto &astContext = evaluator.getASTContext();
// Build the Symbolic value result for our truncated value.
return SymbolicValue::getAggregate(
{SymbolicValue::getInteger(result, astContext),
SymbolicValue::getInteger(APInt(1, overflowed), astContext)},
astContext);
};
switch (builtin.ID) {
default:
break;
case BuiltinValueKind::SToSCheckedTrunc:
return IntCheckedTruncFn(true, true);
case BuiltinValueKind::UToSCheckedTrunc:
return IntCheckedTruncFn(false, true);
case BuiltinValueKind::SToUCheckedTrunc:
return IntCheckedTruncFn(true, false);
case BuiltinValueKind::UToUCheckedTrunc:
return IntCheckedTruncFn(false, false);
case BuiltinValueKind::Trunc:
case BuiltinValueKind::TruncOrBitCast:
case BuiltinValueKind::ZExt:
case BuiltinValueKind::ZExtOrBitCast:
case BuiltinValueKind::SExt:
case BuiltinValueKind::SExtOrBitCast: {
if (operand.getKind() != SymbolicValue::Integer)
return unknownResult();
unsigned destBitWidth =
inst->getType().castTo<BuiltinIntegerType>()->getGreatestWidth();
APInt result = operand.getIntegerValue();
if (result.getBitWidth() != destBitWidth) {
switch (builtin.ID) {
default:
assert(0 && "Unknown case");
case BuiltinValueKind::Trunc:
case BuiltinValueKind::TruncOrBitCast:
result = result.trunc(destBitWidth);
break;
case BuiltinValueKind::ZExt:
case BuiltinValueKind::ZExtOrBitCast:
result = result.zext(destBitWidth);
break;
case BuiltinValueKind::SExt:
case BuiltinValueKind::SExtOrBitCast:
result = result.sext(destBitWidth);
break;
}
}
return SymbolicValue::getInteger(result, evaluator.getASTContext());
}
}
}
// Binary operations.
if (inst->getNumOperands() == 2) {
auto operand0 = getConstantValue(inst->getOperand(0));
auto operand1 = getConstantValue(inst->getOperand(1));
if (!operand0.isConstant())
return operand0;
if (!operand1.isConstant())
return operand1;
auto constFoldIntCompare =
[&](const std::function<bool(const APInt &, const APInt &)> &fn)
-> SymbolicValue {
if (operand0.getKind() != SymbolicValue::Integer ||
operand1.getKind() != SymbolicValue::Integer)
return unknownResult();
auto result = fn(operand0.getIntegerValue(), operand1.getIntegerValue());
return SymbolicValue::getInteger(APInt(1, result),
evaluator.getASTContext());
};
#define REQUIRE_KIND(KIND) \
if (operand0.getKind() != SymbolicValue::KIND || \
operand1.getKind() != SymbolicValue::KIND) \
return unknownResult();
switch (builtin.ID) {
default:
break;
#define INT_BINOP(OPCODE, EXPR) \
case BuiltinValueKind::OPCODE: { \
REQUIRE_KIND(Integer) \
auto l = operand0.getIntegerValue(), r = operand1.getIntegerValue(); \
return SymbolicValue::getInteger((EXPR), evaluator.getASTContext()); \
}
INT_BINOP(Add, l + r)
INT_BINOP(And, l & r)
INT_BINOP(AShr, l.ashr(r))
INT_BINOP(LShr, l.lshr(r))
INT_BINOP(Or, l | r)
INT_BINOP(Mul, l * r)
INT_BINOP(SDiv, l.sdiv(r))
INT_BINOP(Shl, l << r)
INT_BINOP(SRem, l.srem(r))
INT_BINOP(Sub, l - r)
INT_BINOP(UDiv, l.udiv(r))
INT_BINOP(URem, l.urem(r))
INT_BINOP(Xor, l ^ r)
#undef INT_BINOP
#define INT_COMPARE(OPCODE, EXPR) \
case BuiltinValueKind::OPCODE: \
REQUIRE_KIND(Integer) \
return constFoldIntCompare( \
[&](const APInt &l, const APInt &r) -> bool { return (EXPR); })
INT_COMPARE(ICMP_EQ, l == r);
INT_COMPARE(ICMP_NE, l != r);
INT_COMPARE(ICMP_SLT, l.slt(r));
INT_COMPARE(ICMP_SGT, l.sgt(r));
INT_COMPARE(ICMP_SLE, l.sle(r));
INT_COMPARE(ICMP_SGE, l.sge(r));
INT_COMPARE(ICMP_ULT, l.ult(r));
INT_COMPARE(ICMP_UGT, l.ugt(r));
INT_COMPARE(ICMP_ULE, l.ule(r));
INT_COMPARE(ICMP_UGE, l.uge(r));
#undef INT_COMPARE
#undef REQUIRE_KIND
}
}
// Three operand builtins.
if (inst->getNumOperands() == 3) {
auto operand0 = getConstantValue(inst->getOperand(0));
auto operand1 = getConstantValue(inst->getOperand(1));
auto operand2 = getConstantValue(inst->getOperand(2));
if (!operand0.isConstant())
return operand0;
if (!operand1.isConstant())
return operand1;
if (!operand2.isConstant())
return operand2;
// Overflowing integer operations like sadd_with_overflow take three
// operands: the last one is a "should report overflow" bit.
auto constFoldIntOverflow =
[&](const std::function<APInt(const APInt &, const APInt &, bool &)>
&fn) -> SymbolicValue {
if (operand0.getKind() != SymbolicValue::Integer ||
operand1.getKind() != SymbolicValue::Integer ||
operand2.getKind() != SymbolicValue::Integer)
return unknownResult();
auto l = operand0.getIntegerValue(), r = operand1.getIntegerValue();
bool overflowed = false;
auto result = fn(l, r, overflowed);
// Return a statically diagnosed overflow if the operation is supposed to
// trap on overflow.
if (overflowed && !operand2.getIntegerValue().isNullValue())
return evaluator.getUnknown(SILValue(inst), UnknownReason::Overflow);
auto &astContext = evaluator.getASTContext();
// Build the Symbolic value result for our normal and overflow bit.
return SymbolicValue::getAggregate(
{SymbolicValue::getInteger(result, astContext),
SymbolicValue::getInteger(APInt(1, overflowed), astContext)},
astContext);
};
switch (builtin.ID) {
default:
break;
#define INT_OVERFLOW(OPCODE, METHOD) \
case BuiltinValueKind::OPCODE: \
return constFoldIntOverflow( \
[&](const APInt &l, const APInt &r, bool &overflowed) -> APInt { \
return l.METHOD(r, overflowed); \
})
INT_OVERFLOW(SAddOver, sadd_ov);
INT_OVERFLOW(UAddOver, uadd_ov);
INT_OVERFLOW(SSubOver, ssub_ov);
INT_OVERFLOW(USubOver, usub_ov);
INT_OVERFLOW(SMulOver, smul_ov);
INT_OVERFLOW(UMulOver, umul_ov);
#undef INT_OVERFLOW
}
}
LLVM_DEBUG(llvm::dbgs() << "ConstExpr Unknown Builtin: " << *inst << "\n");
// Otherwise, we don't know how to handle this builtin.
return unknownResult();
}
APInt
swift::Compress::EncodeStringAsNumber(StringRef In, EncodingKind Kind) {
// Allocate enough space for the first character plus one bit which is the
// stop bit for variable length encoding.
unsigned BW = (1 + Huffman::LongestEncodingLength);
APInt num = APInt(BW, 0);
// We set the high bit to zero in order to support encoding
// of chars that start with zero (for variable length encoding).
if (Kind == EncodingKind::Variable) {
num = ++num;
}
// Encode variable-length strings.
if (Kind == EncodingKind::Variable) {
size_t num_bits = 0;
size_t bits = 0;
// Append the characters in the string in reverse. This will allow
// us to decode by appending to a string and not prepending.
for (int i = In.size() - 1; i >= 0; i--) {
char ch = In[i];
// The local variables 'bits' and 'num_bits' are used as a small
// bitstream. Keep accumulating bits into them until they overflow.
// At that point move them into the APInt.
uint64_t local_bits;
uint64_t local_num_bits;
// Find the huffman encoding of the character.
Huffman::variable_encode(local_bits, local_num_bits, ch);
// Add the encoded character into our bitstream.
num_bits += local_num_bits;
bits = (bits << local_num_bits) + local_bits;
// Check if there is enough room for another word. If not, flush
// the local bitstream into the APInt.
if (num_bits >= (64 - Huffman::LongestEncodingLength)) {
// Make room for the new bits and add the bits.
num = num.zext(num.getBitWidth() + num_bits);
num = num.shl(num_bits); num = num + bits;
num_bits = 0; bits = 0;
}
}
// Flush the local bitstream into the APInt number.
if (num_bits) {
num = num.zext(num.getBitWidth() + num_bits);
num = num.shl(num_bits); num = num + bits;
num_bits = 0; bits = 0;
}
// Make sure that we have a minimal word size to be able to perform
// calculations on our alphabet.
return num.zextOrSelf(std::max(64u, num.getBitWidth()));
}
// Encode fixed width strings.
for (int i = In.size() - 1; i >= 0; i--) {
char ch = In[i];
// Extend the number and create room for encoding another character.
unsigned MinBits = num.getActiveBits() + Huffman::LongestEncodingLength;
num = num.zextOrTrunc(std::max(64u, MinBits));
EncodeFixedWidth(num, ch);
}
return num;
}
isl_set *LoopDomain = isl_set_copy(isl_set_from_cloog_domain(For->domain));
int NumberOfIterations = polly::getNumberOfIterations(LoopDomain);
if (NumberOfIterations == -1)
return -1;
return NumberOfIterations / isl_int_get_si(For->stride) + 1;
}
void ClastStmtCodeGen::codegenForVector(const clast_for *F) {
DEBUG(dbgs() << "Vectorizing loop '" << F->iterator << "'\n";);
int VectorWidth = getNumberOfIterations(F);
Value *LB = ExpGen.codegen(F->LB, getIntPtrTy());
APInt Stride = APInt_from_MPZ(F->stride);
IntegerType *LoopIVType = dyn_cast<IntegerType>(LB->getType());
Stride = Stride.zext(LoopIVType->getBitWidth());
Value *StrideValue = ConstantInt::get(LoopIVType, Stride);
std::vector<Value *> IVS(VectorWidth);
IVS[0] = LB;
for (int i = 1; i < VectorWidth; i++)
IVS[i] = Builder.CreateAdd(IVS[i - 1], StrideValue, "p_vector_iv");
isl_set *Domain = isl_set_from_cloog_domain(F->domain);
// Add loop iv to symbols.
ClastVars[F->iterator] = LB;
const clast_stmt *Stmt = F->body;
bool StringRef::getAsInteger(unsigned Radix, APInt &Result) const {
StringRef Str = *this;
// Autosense radix if not specified.
if (Radix == 0)
Radix = GetAutoSenseRadix(Str);
assert(Radix > 1 && Radix <= 36);
// Empty strings (after the radix autosense) are invalid.
if (Str.empty()) return true;
// Skip leading zeroes. This can be a significant improvement if
// it means we don't need > 64 bits.
while (!Str.empty() && Str.front() == '0')
Str = Str.substr(1);
// If it was nothing but zeroes....
if (Str.empty()) {
Result = APInt(64, 0);
return false;
}
// (Over-)estimate the required number of bits.
unsigned Log2Radix = 0;
while ((1U << Log2Radix) < Radix) Log2Radix++;
bool IsPowerOf2Radix = ((1U << Log2Radix) == Radix);
unsigned BitWidth = Log2Radix * Str.size();
if (BitWidth < Result.getBitWidth())
BitWidth = Result.getBitWidth(); // don't shrink the result
else
Result = Result.zext(BitWidth);
APInt RadixAP, CharAP; // unused unless !IsPowerOf2Radix
if (!IsPowerOf2Radix) {
// These must have the same bit-width as Result.
RadixAP = APInt(BitWidth, Radix);
CharAP = APInt(BitWidth, 0);
}
// Parse all the bytes of the string given this radix.
Result = 0;
while (!Str.empty()) {
unsigned CharVal;
if (Str[0] >= '0' && Str[0] <= '9')
CharVal = Str[0]-'0';
else if (Str[0] >= 'a' && Str[0] <= 'z')
CharVal = Str[0]-'a'+10;
else if (Str[0] >= 'A' && Str[0] <= 'Z')
CharVal = Str[0]-'A'+10;
else
return true;
// If the parsed value is larger than the integer radix, the string is
// invalid.
if (CharVal >= Radix)
return true;
// Add in this character.
if (IsPowerOf2Radix) {
Result <<= Log2Radix;
Result |= CharVal;
} else {
Result *= RadixAP;
CharAP = CharVal;
Result += CharAP;
}
Str = Str.substr(1);
}
return false;
}
bool llvm::decomposeBitTestICmp(Value *LHS, Value *RHS,
CmpInst::Predicate &Pred,
Value *&X, APInt &Mask, bool LookThruTrunc) {
using namespace PatternMatch;
const APInt *C;
if (!match(RHS, m_APInt(C)))
return false;
switch (Pred) {
default:
return false;
case ICmpInst::ICMP_SLT:
// X < 0 is equivalent to (X & SignMask) != 0.
if (!C->isNullValue())
return false;
Mask = APInt::getSignMask(C->getBitWidth());
Pred = ICmpInst::ICMP_NE;
break;
case ICmpInst::ICMP_SLE:
// X <= -1 is equivalent to (X & SignMask) != 0.
if (!C->isAllOnesValue())
return false;
Mask = APInt::getSignMask(C->getBitWidth());
Pred = ICmpInst::ICMP_NE;
break;
case ICmpInst::ICMP_SGT:
// X > -1 is equivalent to (X & SignMask) == 0.
if (!C->isAllOnesValue())
return false;
Mask = APInt::getSignMask(C->getBitWidth());
Pred = ICmpInst::ICMP_EQ;
break;
case ICmpInst::ICMP_SGE:
// X >= 0 is equivalent to (X & SignMask) == 0.
if (!C->isNullValue())
return false;
Mask = APInt::getSignMask(C->getBitWidth());
Pred = ICmpInst::ICMP_EQ;
break;
case ICmpInst::ICMP_ULT:
// X <u 2^n is equivalent to (X & ~(2^n-1)) == 0.
if (!C->isPowerOf2())
return false;
Mask = -*C;
Pred = ICmpInst::ICMP_EQ;
break;
case ICmpInst::ICMP_ULE:
// X <=u 2^n-1 is equivalent to (X & ~(2^n-1)) == 0.
if (!(*C + 1).isPowerOf2())
return false;
Mask = ~*C;
Pred = ICmpInst::ICMP_EQ;
break;
case ICmpInst::ICMP_UGT:
// X >u 2^n-1 is equivalent to (X & ~(2^n-1)) != 0.
if (!(*C + 1).isPowerOf2())
return false;
Mask = ~*C;
Pred = ICmpInst::ICMP_NE;
break;
case ICmpInst::ICMP_UGE:
// X >=u 2^n is equivalent to (X & ~(2^n-1)) != 0.
if (!C->isPowerOf2())
return false;
Mask = -*C;
Pred = ICmpInst::ICMP_NE;
break;
}
if (LookThruTrunc && match(LHS, m_Trunc(m_Value(X)))) {
Mask = Mask.zext(X->getType()->getScalarSizeInBits());
} else {
X = LHS;
}
return true;
}
static SILInstruction *
constantFoldAndCheckIntegerConversions(BuiltinInst *BI,
const BuiltinInfo &Builtin,
Optional<bool> &ResultsInError) {
assert(Builtin.ID == BuiltinValueKind::SToSCheckedTrunc ||
Builtin.ID == BuiltinValueKind::UToUCheckedTrunc ||
Builtin.ID == BuiltinValueKind::SToUCheckedTrunc ||
Builtin.ID == BuiltinValueKind::UToSCheckedTrunc ||
Builtin.ID == BuiltinValueKind::SUCheckedConversion ||
Builtin.ID == BuiltinValueKind::USCheckedConversion);
// Check if we are converting a constant integer.
OperandValueArrayRef Args = BI->getArguments();
auto *V = dyn_cast<IntegerLiteralInst>(Args[0]);
if (!V)
return nullptr;
APInt SrcVal = V->getValue();
// Get source type and bit width.
Type SrcTy = Builtin.Types[0];
uint32_t SrcBitWidth =
Builtin.Types[0]->castTo<BuiltinIntegerType>()->getGreatestWidth();
// Compute the destination (for SrcBitWidth < DestBitWidth) and enough info
// to check for overflow.
APInt Result;
bool OverflowError;
Type DstTy;
// Process conversions signed <-> unsigned for same size integers.
if (Builtin.ID == BuiltinValueKind::SUCheckedConversion ||
Builtin.ID == BuiltinValueKind::USCheckedConversion) {
DstTy = SrcTy;
Result = SrcVal;
// Report an error if the sign bit is set.
OverflowError = SrcVal.isNegative();
// Process truncation from unsigned to signed.
} else if (Builtin.ID != BuiltinValueKind::UToSCheckedTrunc) {
assert(Builtin.Types.size() == 2);
DstTy = Builtin.Types[1];
uint32_t DstBitWidth =
DstTy->castTo<BuiltinIntegerType>()->getGreatestWidth();
// Result = trunc_IntFrom_IntTo(Val)
// For signed destination:
// sext_IntFrom(Result) == Val ? Result : overflow_error
// For signed destination:
// zext_IntFrom(Result) == Val ? Result : overflow_error
Result = SrcVal.trunc(DstBitWidth);
// Get the signedness of the destination.
bool Signed = (Builtin.ID == BuiltinValueKind::SToSCheckedTrunc);
APInt Ext = Signed ? Result.sext(SrcBitWidth) : Result.zext(SrcBitWidth);
OverflowError = (SrcVal != Ext);
// Process the rest of truncations.
} else {
assert(Builtin.Types.size() == 2);
DstTy = Builtin.Types[1];
uint32_t DstBitWidth =
Builtin.Types[1]->castTo<BuiltinIntegerType>()->getGreatestWidth();
// Compute the destination (for SrcBitWidth < DestBitWidth):
// Result = trunc_IntTo(Val)
// Trunc = trunc_'IntTo-1bit'(Val)
// zext_IntFrom(Trunc) == Val ? Result : overflow_error
Result = SrcVal.trunc(DstBitWidth);
APInt TruncVal = SrcVal.trunc(DstBitWidth - 1);
OverflowError = (SrcVal != TruncVal.zext(SrcBitWidth));
}
// Check for overflow.
if (OverflowError) {
// If we are not asked to emit overflow diagnostics, just return nullptr on
// overflow.
if (!ResultsInError.hasValue())
return nullptr;
SILLocation Loc = BI->getLoc();
SILModule &M = BI->getModule();
const ApplyExpr *CE = Loc.getAsASTNode<ApplyExpr>();
Type UserSrcTy;
Type UserDstTy;
// Primitive heuristics to get the user-written type.
// Eventually we might be able to use SILLocation (when it contains info
// about inlined call chains).
if (CE) {
if (const TupleType *RTy = CE->getArg()->getType()->getAs<TupleType>()) {
if (RTy->getNumElements() == 1) {
UserSrcTy = RTy->getElementType(0);
UserDstTy = CE->getType();
}
} else {
UserSrcTy = CE->getArg()->getType();
UserDstTy = CE->getType();
}
}
// Assume that we are converting from a literal if the Source size is
// 2048. Is there a better way to identify conversions from literals?
bool Literal = (SrcBitWidth == 2048);
// FIXME: This will prevent hard error in cases the error is coming
// from ObjC interoperability code. Currently, we treat NSUInteger as
// Int.
if (Loc.getSourceLoc().isInvalid()) {
// Otherwise emit the appropriate diagnostic and set ResultsInError.
if (Literal)
diagnose(M.getASTContext(), Loc.getSourceLoc(),
diag::integer_literal_overflow_warn,
UserDstTy.isNull() ? DstTy : UserDstTy);
else
diagnose(M.getASTContext(), Loc.getSourceLoc(),
diag::integer_conversion_overflow_warn,
UserSrcTy.isNull() ? SrcTy : UserSrcTy,
UserDstTy.isNull() ? DstTy : UserDstTy);
ResultsInError = Optional<bool>(true);
return nullptr;
}
// Otherwise report the overflow error.
if (Literal) {
bool SrcTySigned, DstTySigned;
std::tie(SrcTySigned, DstTySigned) = getTypeSignedness(Builtin);
SmallString<10> SrcAsString;
SrcVal.toString(SrcAsString, /*radix*/10, SrcTySigned);
// Try to print user-visible types if they are available.
if (!UserDstTy.isNull()) {
auto diagID = diag::integer_literal_overflow;
// If this is a negative literal in an unsigned type, use a specific
// diagnostic.
if (SrcTySigned && !DstTySigned && SrcVal.isNegative())
diagID = diag::negative_integer_literal_overflow_unsigned;
diagnose(M.getASTContext(), Loc.getSourceLoc(),
diagID, UserDstTy, SrcAsString);
// Otherwise, print the Builtin Types.
} else {
bool SrcTySigned, DstTySigned;
std::tie(SrcTySigned, DstTySigned) = getTypeSignedness(Builtin);
diagnose(M.getASTContext(), Loc.getSourceLoc(),
diag::integer_literal_overflow_builtin_types,
DstTySigned, DstTy, SrcAsString);
}
} else {
if (Builtin.ID == BuiltinValueKind::SUCheckedConversion) {
diagnose(M.getASTContext(), Loc.getSourceLoc(),
diag::integer_conversion_sign_error,
UserDstTy.isNull() ? DstTy : UserDstTy);
} else {
// Try to print user-visible types if they are available.
if (!UserSrcTy.isNull()) {
diagnose(M.getASTContext(), Loc.getSourceLoc(),
diag::integer_conversion_overflow,
UserSrcTy, UserDstTy);
// Otherwise, print the Builtin Types.
} else {
// Since builtin types are sign-agnostic, print the signedness
// separately.
bool SrcTySigned, DstTySigned;
std::tie(SrcTySigned, DstTySigned) = getTypeSignedness(Builtin);
diagnose(M.getASTContext(), Loc.getSourceLoc(),
diag::integer_conversion_overflow_builtin_types,
SrcTySigned, SrcTy, DstTySigned, DstTy);
}
}
}
ResultsInError = Optional<bool>(true);
return nullptr;
}
// The call to the builtin should be replaced with the constant value.
return constructResultWithOverflowTuple(BI, Result, false);
}
