示例#1
0
void CBotFunction::RestoreState(CBotVar** ppVars, CBotStack* &pj, CBotVar* pInstance)
{
    CBotStack*  pile = pj->RestoreStack(this);          // one end of stack local to this function
    if ( pile == NULL ) return;
    CBotStack*  pile2 = pile;

    pile->SetBotCall(m_pProg);                          // bases for routines

    if ( pile->GetBlock() < 2 )
    {
        CBotStack*  pile2 = pile->RestoreStack(NULL);       // one end of stack local to this function
        if ( pile2 == NULL ) return;
        pile->SetState(pile->GetState() + pile2->GetState());
        pile2->Delete();
    }

    m_Param->RestoreState(pile2, true);                 // parameters

    if ( !m_MasterClass.IsEmpty() )
    {
        CBotVar* pThis = pile->FindVar("this");
        pThis->SetInit(2);
        pThis->SetUniqNum(-2);
    }

    m_Block->RestoreState(pile2, true);
}
示例#2
0
bool CBotInstrCall::Execute(CBotStack* &pj)
{
    CBotVar*    ppVars[1000];
    CBotStack*  pile  = pj->AddStack(this);
    if ( pile->StackOver() ) return pj->Return( pile );

//    CBotStack*  pile1 = pile;

    int     i = 0;

    CBotInstr*  p = m_Parameters;
    // evaluates parameters
    // and places the values ​​on the stack
    // for allow of interruption at any time
    if ( p != NULL) while ( true )
    {
        pile = pile->AddStack();                        // place on the stack for the results
        if ( pile->GetState() == 0 )
        {
            if (!p->Execute(pile)) return false;        // interrupted here?
            pile->SetState(1);                          // mark as special for reknowed parameters \TODO marque spéciale pour reconnaîre parameters
        }
        ppVars[i++] = pile->GetVar();
        p = p->GetNext();
        if ( p == NULL) break;
    }
    ppVars[i] = NULL;

    CBotStack* pile2 = pile->AddStack();
    if ( pile2->IfStep() ) return false;

    if ( !pile2->ExecuteCall(m_nFuncIdent, GetToken(), ppVars, m_typRes)) return false; // interrupt

    return pj->Return(pile2);   // release the entire stack
}
示例#3
0
bool CBotWhile::Execute(CBotStack* &pj)
{
    CBotStack* pile = pj->AddStack(this);   // adds an item to the stack
                                            // or find in case of recovery
//  if ( pile == EOX ) return true;

    if ( pile->IfStep() ) return false;

    while( true ) switch( pile->GetState() )    // executes the loop
    {                                           // there are two possible states (depending on recovery)
    case 0:
        // evaluates the condition
        if ( !m_condition->Execute(pile) ) return false; // interrupted here?

        // the result of the condition is on the stack

        // terminates if an error or if the condition is false
        if ( !pile->IsOk() || pile->GetVal() != true )
        {
            return pj->Return(pile);                    // sends the results and releases the stack
        }

        // the condition is true, pass in the second mode

        if (!pile->SetState(1)) return false;           // ready for further

    case 1:
        // evaluates the associated statement block
        if (m_block != nullptr &&
            !m_block->Execute(pile) )
        {
            if (pile->IfContinue(0, m_label)) continue; // if continued, will return to test
            return pj->BreakReturn(pile, m_label);      // sends the results and releases the stack
        }

        // terminates if there is an error
        if ( !pile->IsOk() )
        {
            return pj->Return(pile);                    // sends the results and releases the stack
        }

        // returns to the test again
        if (!pile->SetState(0, 0)) return false;
        continue;
    }
}
示例#4
0
bool CBotInstrCall::Execute(CBotStack* &pj)
{
    CBotVar*    ppVars[1000];
    CBotStack*  pile  = pj->AddStack(this);
    if ( pile->StackOver() ) return pj->Return( pile );

    CBotStack* pile3 = nullptr;
    if (m_exprRetVar != nullptr) // func().member
    {
        pile3 = pile->AddStack2();
        if (pile3->GetState() == 1) // function call is done?
        {
            if (!m_exprRetVar->Execute(pile3)) return false;
            return pj->Return(pile3);
        }
    }

//    CBotStack*  pile1 = pile;

    int     i = 0;

    CBotInstr*  p = m_parameters;
    // evaluates parameters
    // and places the values ​​on the stack
    // for allow of interruption at any time
    if ( p != nullptr) while ( true )
    {
        pile = pile->AddStack();                        // place on the stack for the results
        if ( pile->GetState() == 0 )
        {
            if (!p->Execute(pile)) return false;        // interrupted here?
            pile->SetState(1);                          // set state to remember that parameters were executed
        }
        ppVars[i++] = pile->GetVar();
        p = p->GetNext();
        if ( p == nullptr) break;
    }
    ppVars[i] = nullptr;

    CBotStack* pile2 = pile->AddStack();
    if ( pile2->IfStep() ) return false;

    if ( !pile2->ExecuteCall(m_nFuncIdent, GetToken(), ppVars, m_typRes)) return false; // interrupt

    if (m_exprRetVar != nullptr) // func().member
    {
        pile3->SetCopyVar( pile2->GetVar() ); // copy the result
        pile2->SetVar(nullptr);
        pile3->SetState(1);      // set call is done
        return false;            // go back to the top ^^^
    }

    return pj->Return(pile2);   // release the entire stack
}
示例#5
0
文件: CBotIf.cpp 项目: 2asoft/colobot
bool CBotIf :: Execute(CBotStack* &pj)
{
    CBotStack* pile = pj->AddStack(this);       // adds an item to the stack
                                                // or found in case of recovery
//  if ( pile == EOX ) return true;

    if ( pile->IfStep() ) return false;

    // according to recovery, it may be in one of two states
    if( pile->GetState() == 0 )
    {
        // evaluates the condition
        if ( !m_condition->Execute(pile) ) return false;    // interrupted here?

        // terminates if there is an error
        if ( !pile->IsOk() )
        {
            return pj->Return(pile);                        // returns the results and releases the stack
        }

        // passes into the second state
        if (!pile->SetState(1)) return false;               // ready for further
    }

    // second state, evaluates the associated instructions
    // the result of the condition is on the stack

    if ( pile->GetVal() == true )                           // condition was true?
    {
        if (m_block != nullptr &&                             // block may be absent
            !m_block->Execute(pile) ) return false;         // interrupted here?
    }
    else
    {
        if (m_blockElse != nullptr &&                         // if there is an alternate block
            !m_blockElse->Execute(pile) ) return false; // interrupted here
    }

    // sends the results and releases the stack
    return pj->Return(pile);
}
示例#6
0
BOOL CBotIf :: Execute(CBotStack* &pj)
{
	CBotStack* pile = pj->AddStack(this);		// ajoute un élément à la pile
												// ou le retrouve en cas de reprise
//	if ( pile == EOX ) return TRUE;

	if ( pile->IfStep() ) return FALSE;

	// selon la reprise, on peut être dans l'un des 2 états
	if( pile->GivState() == 0 )
	{
		// évalue la condition
		if ( !m_Condition->Execute(pile) ) return FALSE;	// interrompu ici ?

		// termine s'il y a une erreur
		if ( !pile->IsOk() )
		{
			return pj->Return(pile);						// transmet le résultat et libère la pile
		}

		// passe dans le second état
		if (!pile->SetState(1)) return FALSE;				// prêt pour la suite
	}
	
	// second état, évalue les instructions associées
	// le résultat de la condition est sur la pile

	if ( pile->GivVal() == TRUE )							// condition était vraie ?
	{
		if ( m_Block != NULL &&								// bloc peut être absent
			!m_Block->Execute(pile) ) return FALSE;			// interrompu ici ?
	}
	else
	{
		if ( m_BlockElse != NULL &&							// s'il existe un bloc alternatif
			!m_BlockElse->Execute(pile) ) return FALSE;		// interrompu ici
	}

	// transmet le résultat et libère la pile
	return pj->Return(pile);
}
示例#7
0
bool CBotNew::Execute(CBotStack* &pj)
{
    CBotStack*    pile = pj->AddStack(this);    //main stack

    if (m_exprRetVar != nullptr) // new Class().method()
    {
        if (pile->GetState() == 2)
        {
            CBotStack* pile3 = pile->AddStack();
            if (!m_exprRetVar->Execute(pile3)) return false;
            return pj->Return(pile3);
        }
    }

    if (pile->IfStep()) return false;

    CBotStack*    pile1 = pj->AddStack2();  //secondary stack

    CBotVar*    pThis = nullptr;

    CBotToken*    pt = &m_vartoken;
    CBotClass*    pClass = CBotClass::Find(pt);

    // create the variable "this" pointer type to the stack

    if ( pile->GetState()==0)
    {
        // create an instance of the requested class
        // and initialize the pointer to that object


        pThis = CBotVar::Create("this", pClass);
        pThis->SetUniqNum(-2) ;

        pile1->SetVar(pThis);   // place on stack1
        pile->IncState();
    }

    // fetch the this pointer if it was interrupted
    if ( pThis == nullptr)
    {
        pThis = pile1->GetVar();    // find the pointer
    }

    // is there an assignment or parameters (constructor)
    if ( pile->GetState()==1)
    {
        // evaluates the constructor of the instance

        CBotVar*    ppVars[1000];
        CBotStack*    pile2 = pile;

        int        i = 0;

        CBotInstr*    p = m_parameters;
        // evaluate the parameters
        // and places the values on the stack
        // to be interrupted at any time

        if (p != nullptr) while ( true)
        {
            pile2 = pile2->AddStack();  // space on the stack for the result
            if (pile2->GetState() == 0)
            {
                if (!p->Execute(pile2)) return false;   // interrupted here?
                pile2->SetState(1);
            }
            ppVars[i++] = pile2->GetVar();
            p = p->GetNext();
            if ( p == nullptr) break;
        }
        ppVars[i] = nullptr;

        // create a variable for the result
        CBotVar*    pResult = nullptr;     // constructos still void

        if ( !pClass->ExecuteMethode(m_nMethodeIdent, pClass->GetName(),
                                     pThis, ppVars,
                                     pResult, pile2, GetToken())) return false;    // interrupt

        pThis->ConstructorSet();    // indicates that the constructor has been called
    }

    if (m_exprRetVar != nullptr) // new Class().method()
    {
        pile->AddStack()->Delete();          // release pile2 stack
        CBotStack* pile3 = pile->AddStack(); // add new stack
        pile3->SetCopyVar(pThis); // copy the pointer (from pile1)
        pile1->Delete();          // release secondary stack(pile1)
        pile->SetState(2);
        return false;             // go back to the top ^^^
    }

    return pj->Return(pile1);   // passes below
}
示例#8
0
bool CBotFor :: Execute(CBotStack* &pj)
{
    CBotStack* pile = pj->AddStack(this, true);     // adds an item to the stack (variables locales)
                                                    // or find in case of recovery
//  if ( pile == EOX ) return true;

    if ( pile->IfStep() ) return false;

    while( true ) switch( pile->GetState() )    // executes the loop
    {                                           // there are four possible states (depending on recovery)
    case 0:
        // initialize
        if ( m_Init != nullptr &&
             !m_Init->Execute(pile) ) return false;     // interrupted here ?
        if (!pile->SetState(1)) return false;           // ready for further

    case 1:
        // evaluates the condition
        if ( m_Test != nullptr )                           // no strings attached? -> True!
        {
            if (!m_Test->Execute(pile) ) return false;  // interrupted here ?

            // the result of the condition is on the stack

            // terminates if an error or if the condition is false
            if ( !pile->IsOk() || pile->GetVal() != true )
            {
                return pj->Return(pile);                // sends the results and releases the stack
            }
        }

        // la condition est vrai, passe à la suite
        if (!pile->SetState(2)) return false;           // ready for further

    case 2:
        // evaluates the associated statement block
        if ( m_Block != nullptr &&
            !m_Block->Execute(pile) )
        {
            if (pile->IfContinue(3, m_label)) continue; // if continued, going on to incrementation
            return pj->BreakReturn(pile, m_label);      // sends the results and releases the stack
        }

        // terminates if there is an error
        if ( !pile->IsOk() )
        {
            return pj->Return(pile);                    // sends the results and releases the stack
        }

        if (!pile->SetState(3)) return false;           // ready for further

    case 3:
        // evalutate the incrementation
        if ( m_Incr != nullptr &&
            !m_Incr->Execute(pile) ) return false;      // interrupted here ?

        // returns to the test again
        if (!pile->SetState(1, 0)) return false;            // returns to the test
        continue;
    }
}
示例#9
0
bool CBotClassInst::Execute(CBotStack* &pj)
{
    CBotVar*    pThis = NULL;

    CBotStack*  pile = pj->AddStack(this);//essential for SetState()
//  if ( pile == EOX ) return true;

    CBotToken*  pt = &m_token;
    CBotClass*  pClass = CBotClass::Find(pt);

    bool bIntrincic = pClass->IsIntrinsic();

    // creates the variable of type pointer to the object

    if ( pile->GetState()==0)
    {
        CBotString  name = m_var->m_token.GetString();
        if ( bIntrincic )
        {
            pThis = CBotVar::Create(name, CBotTypResult( CBotTypIntrinsic, pClass ));
        }
        else
        {
            pThis = CBotVar::Create(name, CBotTypResult( CBotTypPointer, pClass ));
        }

        pThis->SetUniqNum((static_cast<CBotLeftExprVar*>(m_var))->m_nIdent); // its attribute as unique number
        pile->AddVar(pThis);                                    // place on the stack
        pile->IncState();
    }

    if ( pThis == NULL ) pThis = pile->FindVar((static_cast<CBotLeftExprVar*>(m_var))->m_nIdent);

    if ( pile->GetState()<3)
    {
        // ss there an assignment or parameters (contructor)

//      CBotVarClass* pInstance = NULL;

        if ( m_expr != NULL )
        {
            // evaluates the expression for the assignment
            if (!m_expr->Execute(pile)) return false;

            if ( bIntrincic )
            {
                CBotVar*    pv = pile->GetVar();
                if ( pv == NULL || pv->GetPointer() == NULL )
                {
                    pile->SetError(TX_NULLPT, &m_token);
                    return pj->Return(pile);
                }
                pThis->Copy(pile->GetVar(), false);
            }
            else
            {
                CBotVarClass* pInstance;
                pInstance = (static_cast<CBotVarPointer*>(pile->GetVar()))->GetPointer();    // value for the assignment
                pThis->SetPointer(pInstance);
            }
            pThis->SetInit(true);
        }

        else if ( m_hasParams )
        {
            // evaluates the constructor of an instance

            if ( !bIntrincic && pile->GetState() == 1)
            {
                CBotToken*  pt = &m_token;
                CBotClass* pClass = CBotClass::Find(pt);

                // creates an instance of the requested class

                CBotVarClass* pInstance;
                pInstance = static_cast<CBotVarClass*>(CBotVar::Create("", pClass));
                pThis->SetPointer(pInstance);
                delete pInstance;

                pile->IncState();
            }

            CBotVar*    ppVars[1000];
            CBotStack*  pile2 = pile;

            int     i = 0;

            CBotInstr*  p = m_Parameters;
            // evaluates the parameters
            // and places the values ​​on the stack
            // to (can) be interrupted (broken) at any time

            if ( p != NULL) while ( true )
            {
                pile2 = pile2->AddStack();                      // place on the stack for the results
                if ( pile2->GetState() == 0 )
                {
                    if (!p->Execute(pile2)) return false;       // interrupted here?
                    pile2->SetState(1);
                }
                ppVars[i++] = pile2->GetVar();
                p = p->GetNext();
                if ( p == NULL) break;
            }
            ppVars[i] = NULL;

            // creates a variable for the result
            CBotVar*    pResult = NULL;     // constructor still void

            if ( !pClass->ExecuteMethode(m_nMethodeIdent, pClass->GetName(),
                                         pThis, ppVars,
                                         pResult, pile2, GetToken())) return false; // interrupt

            pThis->SetInit(true);
            pThis->ConstructorSet();        // indicates that the constructor has been called
            pile->Return(pile2);                                // releases a piece of stack

//          pInstance = pThis->GetPointer();

        }

//      if ( !bIntrincic ) pThis->SetPointer(pInstance);        // a pointer to the instance

        pile->SetState(3);                                  // finished this part
    }

    if ( pile->IfStep() ) return false;

    if ( m_next2b != NULL &&
        !m_next2b->Execute(pile)) return false;             // other (s) definition (s)

    return pj->Return( pile );                              // transmits below (further)
}