/* * vs_resolve -- * Deal with message output. * * PUBLIC: int vs_resolve __P((SCR *, SCR *, int)); */ int vs_resolve(SCR *sp, SCR *csp, int forcewait) { EVENT ev; GS *gp; WIN *wp; MSGS *mp; VI_PRIVATE *vip; size_t oldy, oldx; int redraw; /* * Vs_resolve is called from the main vi loop and the refresh function * to periodically ensure that the user has seen any messages that have * been displayed and that any status lines are correct. The sp screen * is the screen we're checking, usually the current screen. When it's * not, csp is the current screen, used for final cursor positioning. */ gp = sp->gp; wp = sp->wp; vip = VIP(sp); if (csp == NULL) csp = sp; /* Save the cursor position. */ (void)gp->scr_cursor(csp, &oldy, &oldx); /* Ring the bell if it's scheduled. */ if (F_ISSET(gp, G_BELLSCHED)) { F_CLR(gp, G_BELLSCHED); (void)gp->scr_bell(sp); } /* Display new file status line. */ if (F_ISSET(sp, SC_STATUS)) { F_CLR(sp, SC_STATUS); msgq_status(sp, sp->lno, MSTAT_TRUNCATE); } /* Report on line modifications. */ mod_rpt(sp); /* * Flush any saved messages. If the screen isn't ready, refresh * it. (A side-effect of screen refresh is that we can display * messages.) Once this is done, don't trust the cursor. That * extra refresh screwed the pooch. */ if (gp->msgq.lh_first != NULL) { if (!F_ISSET(sp, SC_SCR_VI) && vs_refresh(sp, 1)) return (1); while ((mp = gp->msgq.lh_first) != NULL) { wp->scr_msg(sp, mp->mtype, mp->buf, mp->len); LIST_REMOVE(mp, q); free(mp->buf); free(mp); } F_SET(vip, VIP_CUR_INVALID); } switch (vip->totalcount) { case 0: redraw = 0; break; case 1: /* * If we're switching screens, we have to wait for messages, * regardless. If we don't wait, skip updating the modeline. */ if (forcewait) vs_scroll(sp, NULL, SCROLL_W); else F_SET(vip, VIP_S_MODELINE); redraw = 0; break; default: /* * If >1 message line in use, prompt the user to continue and * repaint overwritten lines. */ vs_scroll(sp, NULL, SCROLL_W); ev.e_event = E_REPAINT; ev.e_flno = vip->totalcount >= sp->rows ? 1 : sp->rows - vip->totalcount; ev.e_tlno = sp->rows; redraw = 1; break; } /* Reset the count of overwriting lines. */ vip->linecount = vip->lcontinue = vip->totalcount = 0; /* Redraw. */ if (redraw) (void)v_erepaint(sp, &ev); /* Restore the cursor position. */ (void)gp->scr_move(csp, oldy, oldx); return (0); }
/* * vs_wait -- * Prompt the user to continue. */ static void vs_wait(SCR *sp, int *continuep, sw_t wtype) { EVENT ev; VI_PRIVATE *vip; const char *p; GS *gp; size_t len; gp = sp->gp; vip = VIP(sp); (void)gp->scr_move(sp, LASTLINE(sp), 0); if (IS_ONELINE(sp)) p = msg_cmsg(sp, CMSG_CONT_S, &len); else switch (wtype) { case SCROLL_W_QUIT: p = msg_cmsg(sp, CMSG_CONT_Q, &len); break; case SCROLL_W_EX: p = msg_cmsg(sp, CMSG_CONT_EX, &len); break; case SCROLL_W: p = msg_cmsg(sp, CMSG_CONT, &len); break; default: abort(); /* NOTREACHED */ } (void)gp->scr_addstr(sp, p, len); ++vip->totalcount; vip->linecount = 0; (void)gp->scr_clrtoeol(sp); (void)gp->scr_refresh(sp, 0); /* Get a single character from the terminal. */ if (continuep != NULL) *continuep = 0; for (;;) { if (v_event_get(sp, &ev, 0, 0)) return; if (ev.e_event == E_CHARACTER) break; if (ev.e_event == E_INTERRUPT) { ev.e_c = CH_QUIT; F_SET(gp, G_INTERRUPTED); break; } (void)gp->scr_bell(sp); } switch (wtype) { case SCROLL_W_QUIT: if (ev.e_c == CH_QUIT) F_SET(gp, G_INTERRUPTED); break; case SCROLL_W_EX: if (ev.e_c == ':' && continuep != NULL) *continuep = 1; break; case SCROLL_W: break; } }
/* * vs_msg -- * Display ex output or error messages for the screen. * * This routine is the default editor interface for all ex output, and all ex * and vi error/informational messages. It implements the standard strategy * of stealing lines from the bottom of the vi text screen. Screens using an * alternate method of displaying messages, e.g. dialog boxes, should set their * scr_msg function to the correct function before calling the editor. * * PUBLIC: void vs_msg __P((SCR *, mtype_t, char *, size_t)); */ void vs_msg(SCR *sp, mtype_t mtype, char *line, size_t len) { GS *gp; VI_PRIVATE *vip; size_t maxcols, oldx, oldy, padding; const char *e, *s, *t; gp = sp->gp; vip = VIP(sp); /* * Ring the bell if it's scheduled. * * XXX * Shouldn't we save this, too? */ if (F_ISSET(sp, SC_TINPUT_INFO) || F_ISSET(gp, G_BELLSCHED)) { if (F_ISSET(sp, SC_SCR_VI)) { F_CLR(gp, G_BELLSCHED); (void)gp->scr_bell(sp); } else F_SET(gp, G_BELLSCHED); } /* * If vi is using the error line for text input, there's no screen * real-estate for the error message. Nothing to do without some * information as to how important the error message is. */ if (F_ISSET(sp, SC_TINPUT_INFO)) return; /* * Ex or ex controlled screen output. * * If output happens during startup, e.g., a .exrc file, we may be * in ex mode but haven't initialized the screen. Initialize here, * and in this case, stay in ex mode. * * If the SC_SCR_EXWROTE bit is set, then we're switching back and * forth between ex and vi, but the screen is trashed and we have * to respect that. Switch to ex mode long enough to put out the * message. * * If the SC_EX_WAIT_NO bit is set, turn it off -- we're writing to * the screen, so previous opinions are ignored. */ if (F_ISSET(sp, SC_EX | SC_SCR_EXWROTE)) { if (!F_ISSET(sp, SC_SCR_EX)) { if (F_ISSET(sp, SC_SCR_EXWROTE)) { if (sp->gp->scr_screen(sp, SC_EX)) return; } else if (ex_init(sp)) return; } if (mtype == M_ERR) (void)gp->scr_attr(sp, SA_INVERSE, 1); (void)printf("%.*s", (int)len, line); if (mtype == M_ERR) (void)gp->scr_attr(sp, SA_INVERSE, 0); (void)fflush(stdout); F_CLR(sp, SC_EX_WAIT_NO); if (!F_ISSET(sp, SC_SCR_EX)) (void)sp->gp->scr_screen(sp, SC_VI); return; } /* If the vi screen isn't ready, save the message. */ if (!F_ISSET(sp, SC_SCR_VI)) { (void)vs_msgsave(sp, mtype, line, len); return; } /* Save the cursor position. */ (void)gp->scr_cursor(sp, &oldy, &oldx); /* If it's an ex output message, just write it out. */ if (mtype == M_NONE) { vs_output(sp, mtype, line, len); goto ret; } /* * If it's a vi message, strip the trailing <newline> so we can * try and paste messages together. */ if (line[len - 1] == '\n') --len; /* * If a message won't fit on a single line, try to split on a <blank>. * If a subsequent message fits on the same line, write a separator * and output it. Otherwise, put out a newline. * * Need up to two padding characters normally; a semi-colon and a * separating space. If only a single line on the screen, add some * more for the trailing continuation message. * * XXX * Assume that periods and semi-colons take up a single column on the * screen. * * XXX * There are almost certainly pathological cases that will break this * code. */ if (IS_ONELINE(sp)) (void)msg_cmsg(sp, CMSG_CONT_S, &padding); else padding = 0; padding += 2; maxcols = sp->cols - 1; if (vip->lcontinue != 0) { if (len + vip->lcontinue + padding > maxcols) vs_output(sp, vip->mtype, ".\n", 2); else { vs_output(sp, vip->mtype, ";", 1); vs_output(sp, M_NONE, " ", 1); } } vip->mtype = mtype; for (s = line;; s = t) { for (; len > 0 && isblank((unsigned char)*s); --len, ++s); if (len == 0) break; if (len + vip->lcontinue > maxcols) { for (e = s + (maxcols - vip->lcontinue); e > s && !isblank((unsigned char)*e); --e); if (e == s) e = t = s + (maxcols - vip->lcontinue); else for (t = e; isblank((unsigned char)e[-1]); --e); } else e = t = s + len; /* * If the message ends in a period, discard it, we want to * gang messages where possible. */ len -= t - s; if (len == 0 && (e - s) > 1 && s[(e - s) - 1] == '.') --e; vs_output(sp, mtype, s, e - s); if (len != 0) vs_output(sp, M_NONE, "\n", 1); if (INTERRUPTED(sp)) break; } ret: (void)gp->scr_move(sp, oldy, oldx); (void)gp->scr_refresh(sp, 0); }