void DIALOG_PLOT_SCHEMATIC::createPDFFile( bool aPlotAll, bool aPlotFrameRef )
{
SCH_SCREEN* screen = m_parent->GetScreen();
SCH_SHEET_PATH oldsheetpath = m_parent->GetCurrentSheet(); // sheetpath is saved here
/* When printing all pages, the printed page is not the current page. In
* complex hierarchies, we must update component references and others
* parameters in the given printed SCH_SCREEN, accordint to the sheet path
* because in complex hierarchies a SCH_SCREEN (a drawing ) is shared
* between many sheets and component references depend on the actual sheet
* path used
*/
SCH_SHEET_LIST sheetList;
if( aPlotAll )
sheetList.BuildSheetList( g_RootSheet );
else
sheetList.push_back( m_parent->GetCurrentSheet() );
// Allocate the plotter and set the job level parameter
PDF_PLOTTER* plotter = new PDF_PLOTTER();
plotter->SetDefaultLineWidth( GetDefaultLineThickness() );
plotter->SetColorMode( getModeColor() );
plotter->SetCreator( wxT( "Eeschema-PDF" ) );
wxString msg;
wxFileName plotFileName;
REPORTER& reporter = m_MessagesBox->Reporter();
LOCALE_IO toggle; // Switch the locale to standard C
for( unsigned i = 0; i < sheetList.size(); i++ )
{
m_parent->SetCurrentSheet( sheetList[i] );
m_parent->GetCurrentSheet().UpdateAllScreenReferences();
m_parent->SetSheetNumberAndCount();
screen = m_parent->GetCurrentSheet().LastScreen();
if( i == 0 )
{
try
{
wxString fname = m_parent->GetUniqueFilenameForCurrentSheet();
wxString ext = PDF_PLOTTER::GetDefaultFileExtension();
plotFileName = createPlotFileName( m_outputDirectoryName,
fname, ext, &reporter );
if( !plotter->OpenFile( plotFileName.GetFullPath() ) )
{
msg.Printf( _( "Unable to create file '%s'.\n" ),
GetChars( plotFileName.GetFullPath() ) );
reporter.Report( msg, REPORTER::RPT_ERROR );
delete plotter;
return;
}
// Open the plotter and do the first page
setupPlotPagePDF( plotter, screen );
plotter->StartPlot();
}
catch( const IO_ERROR& e )
{
// Cannot plot PDF file
msg.Printf( wxT( "PDF Plotter exception: %s" ), GetChars( e.errorText ) );
reporter.Report( msg, REPORTER::RPT_ERROR );
restoreEnvironment( plotter, oldsheetpath );
return;
}
}
else
{
/* For the following pages you need to close the (finished) page,
* reconfigure, and then start a new one */
plotter->ClosePage();
setupPlotPagePDF( plotter, screen );
plotter->StartPage();
}
plotOneSheetPDF( plotter, screen, aPlotFrameRef );
}
// Everything done, close the plot and restore the environment
msg.Printf( _( "Plot: '%s' OK.\n" ), GetChars( plotFileName.GetFullPath() ) );
reporter.Report( msg, REPORTER::RPT_ACTION );
restoreEnvironment( plotter, oldsheetpath );
}
void DIALOG_PLOT_SCHEMATIC::createHPGLFile( bool aPlotAll, bool aPlotFrameRef )
{
SCH_SCREEN* screen = m_parent->GetScreen();
SCH_SHEET_PATH oldsheetpath = m_parent->GetCurrentSheet();
/* When printing all pages, the printed page is not the current page.
* In complex hierarchies, we must setup references and other parameters
* in the printed SCH_SCREEN
* because in complex hierarchies a SCH_SCREEN (a schematic drawings)
* is shared between many sheets
*/
SCH_SHEET_LIST sheetList;
if( aPlotAll )
sheetList.BuildSheetList( g_RootSheet );
else
sheetList.push_back( m_parent->GetCurrentSheet() );
REPORTER& reporter = m_MessagesBox->Reporter();
SetHPGLPenWidth();
for( unsigned i = 0; i < sheetList.size(); i++ )
{
m_parent->SetCurrentSheet( sheetList[i] );
m_parent->GetCurrentSheet().UpdateAllScreenReferences();
m_parent->SetSheetNumberAndCount();
screen = m_parent->GetCurrentSheet().LastScreen();
if( !screen ) // LastScreen() may return NULL
screen = m_parent->GetScreen();
const PAGE_INFO& curPage = screen->GetPageSettings();
PAGE_INFO plotPage = curPage;
// if plotting on a page size other than curPage
if( m_HPGLPaperSizeOption->GetSelection() != PAGE_DEFAULT )
plotPage.SetType( plot_sheet_list( m_HPGLPaperSizeOption->GetSelection() ) );
// Calculation of conversion scales.
double plot_scale = (double) plotPage.GetWidthMils() / curPage.GetWidthMils();
// Calculate offsets
wxPoint plotOffset;
wxString msg;
if( GetPlotOriginCenter() )
{
plotOffset.x = plotPage.GetWidthIU() / 2;
plotOffset.y = -plotPage.GetHeightIU() / 2;
}
try
{
wxString fname = m_parent->GetUniqueFilenameForCurrentSheet();
wxString ext = HPGL_PLOTTER::GetDefaultFileExtension();
wxFileName plotFileName = createPlotFileName( m_outputDirectoryName, fname,
ext, &reporter );
LOCALE_IO toggle;
if( Plot_1_Page_HPGL( plotFileName.GetFullPath(), screen, plotPage, plotOffset,
plot_scale, aPlotFrameRef ) )
{
msg.Printf( _( "Plot: '%s' OK.\n" ), GetChars( plotFileName.GetFullPath() ) );
reporter.Report( msg, REPORTER::RPT_ACTION );
}
else
{
msg.Printf( _( "Unable to create file '%s'.\n" ),
GetChars( plotFileName.GetFullPath() ) );
reporter.Report( msg, REPORTER::RPT_ERROR );
}
}
catch( IO_ERROR& e )
{
msg.Printf( wxT( "HPGL Plotter exception: %s"), GetChars( e.errorText ) );
reporter.Report( msg, REPORTER::RPT_ERROR );
}
}
m_parent->SetCurrentSheet( oldsheetpath );
m_parent->GetCurrentSheet().UpdateAllScreenReferences();
m_parent->SetSheetNumberAndCount();
}
void DIALOG_PLOT_SCHEMATIC::createPSFile( bool aPlotAll, bool aPlotFrameRef )
{
SCH_SCREEN* screen = m_parent->GetScreen();
SCH_SHEET_PATH oldsheetpath = m_parent->GetCurrentSheet(); // sheetpath is saved here
PAGE_INFO actualPage; // page size selected in schematic
PAGE_INFO plotPage; // page size selected to plot
/* When printing all pages, the printed page is not the current page.
* In complex hierarchies, we must update component references
* and others parameters in the given printed SCH_SCREEN, accordint to the sheet path
* because in complex hierarchies a SCH_SCREEN (a drawing )
* is shared between many sheets and component references depend on the actual sheet path used
*/
SCH_SHEET_LIST sheetList;
if( aPlotAll )
sheetList.BuildSheetList( g_RootSheet );
else
sheetList.push_back( m_parent->GetCurrentSheet() );
for( unsigned i = 0; i < sheetList.size(); i++ )
{
m_parent->SetCurrentSheet( sheetList[i] );
m_parent->GetCurrentSheet().UpdateAllScreenReferences();
m_parent->SetSheetNumberAndCount();
screen = m_parent->GetCurrentSheet().LastScreen();
actualPage = screen->GetPageSettings();
switch( m_pageSizeSelect )
{
case PAGE_SIZE_A:
plotPage.SetType( wxT( "A" ) );
plotPage.SetPortrait( actualPage.IsPortrait() );
break;
case PAGE_SIZE_A4:
plotPage.SetType( wxT( "A4" ) );
plotPage.SetPortrait( actualPage.IsPortrait() );
break;
case PAGE_SIZE_AUTO:
default:
plotPage = actualPage;
break;
}
double scalex = (double) plotPage.GetWidthMils() / actualPage.GetWidthMils();
double scaley = (double) plotPage.GetHeightMils() / actualPage.GetHeightMils();
double scale = std::min( scalex, scaley );
wxPoint plot_offset;
wxString outputDirName = m_outputDirectoryName->GetValue();
wxString msg;
REPORTER& reporter = m_MessagesBox->Reporter();
try
{
wxString fname = m_parent->GetUniqueFilenameForCurrentSheet();
wxString ext = PS_PLOTTER::GetDefaultFileExtension();
wxFileName plotFileName = createPlotFileName( m_outputDirectoryName,
fname, ext, &reporter );
if( plotOneSheetPS( plotFileName.GetFullPath(), screen, plotPage, plot_offset,
scale, aPlotFrameRef ) )
{
msg.Printf( _( "Plot: '%s' OK.\n" ), GetChars( plotFileName.GetFullPath() ) );
reporter.Report( msg, REPORTER::RPT_ACTION );
}
else
{
// Error
msg.Printf( _( "Unable to create file '%s'.\n" ),
GetChars( plotFileName.GetFullPath() ) );
reporter.Report( msg, REPORTER::RPT_ERROR );
}
}
catch( IO_ERROR& e )
{
msg.Printf( wxT( "PS Plotter exception: %s"), GetChars( e.errorText ) );
reporter.Report( msg, REPORTER::RPT_ERROR );
}
}
m_parent->SetCurrentSheet( oldsheetpath );
m_parent->GetCurrentSheet().UpdateAllScreenReferences();
m_parent->SetSheetNumberAndCount();
}
void DIALOG_PLOT_SCHEMATIC::CreateDXFFile( bool aPlotAll, bool aPlotFrameRef )
{
SCH_EDIT_FRAME* schframe = m_parent;
SCH_SCREEN* screen = schframe->GetScreen();
SCH_SHEET_PATH oldsheetpath = schframe->GetCurrentSheet();
/* When printing all pages, the printed page is not the current page.
* In complex hierarchies, we must setup references and others parameters
* in the printed SCH_SCREEN
* because in complex hierarchies a SCH_SCREEN (a schematic drawings)
* is shared between many sheets
*/
SCH_SHEET_LIST sheetList;
if( aPlotAll )
sheetList.BuildSheetList( g_RootSheet );
else
sheetList.push_back( schframe->GetCurrentSheet() );
REPORTER& reporter = m_MessagesBox->Reporter();
for( unsigned i = 0; i < sheetList.size(); i++ )
{
schframe->SetCurrentSheet( sheetList[i] );
schframe->GetCurrentSheet().UpdateAllScreenReferences();
schframe->SetSheetNumberAndCount();
screen = schframe->GetCurrentSheet().LastScreen();
wxPoint plot_offset;
wxString msg;
try
{
wxString fname = schframe->GetUniqueFilenameForCurrentSheet();
wxString ext = DXF_PLOTTER::GetDefaultFileExtension();
wxFileName plotFileName = createPlotFileName( m_outputDirectoryName, fname,
ext, &reporter );
if( PlotOneSheetDXF( plotFileName.GetFullPath(), screen, plot_offset, 1.0,
aPlotFrameRef ) )
{
msg.Printf( _( "Plot: \"%s\" OK.\n" ), GetChars( plotFileName.GetFullPath() ) );
reporter.Report( msg, REPORTER::RPT_ACTION );
}
else // Error
{
msg.Printf( _( "Unable to create file \"%s\".\n" ),
GetChars( plotFileName.GetFullPath() ) );
reporter.Report( msg, REPORTER::RPT_ERROR );
}
}
catch( IO_ERROR& e )
{
msg.Printf( wxT( "DXF Plotter exception: %s"), GetChars( e.What() ) );
reporter.Report( msg, REPORTER::RPT_ERROR );
schframe->SetCurrentSheet( oldsheetpath );
schframe->GetCurrentSheet().UpdateAllScreenReferences();
schframe->SetSheetNumberAndCount();
return;
}
}
schframe->SetCurrentSheet( oldsheetpath );
schframe->GetCurrentSheet().UpdateAllScreenReferences();
schframe->SetSheetNumberAndCount();
}