void DIALOG_PLOT_SCHEMATIC::createPDFFile( bool aPlotAll, bool aPlotFrameRef )
{
SCH_SCREEN* screen = m_parent->GetScreen();
SCH_SHEET_PATH oldsheetpath = m_parent->GetCurrentSheet(); // sheetpath is saved here
/* When printing all pages, the printed page is not the current page. In
* complex hierarchies, we must update component references and others
* parameters in the given printed SCH_SCREEN, accordint to the sheet path
* because in complex hierarchies a SCH_SCREEN (a drawing ) is shared
* between many sheets and component references depend on the actual sheet
* path used
*/
SCH_SHEET_LIST sheetList;
if( aPlotAll )
sheetList.BuildSheetList( g_RootSheet );
else
sheetList.push_back( m_parent->GetCurrentSheet() );
// Allocate the plotter and set the job level parameter
PDF_PLOTTER* plotter = new PDF_PLOTTER();
plotter->SetDefaultLineWidth( GetDefaultLineThickness() );
plotter->SetColorMode( getModeColor() );
plotter->SetCreator( wxT( "Eeschema-PDF" ) );
wxString msg;
wxFileName plotFileName;
REPORTER& reporter = m_MessagesBox->Reporter();
LOCALE_IO toggle; // Switch the locale to standard C
for( unsigned i = 0; i < sheetList.size(); i++ )
{
m_parent->SetCurrentSheet( sheetList[i] );
m_parent->GetCurrentSheet().UpdateAllScreenReferences();
m_parent->SetSheetNumberAndCount();
screen = m_parent->GetCurrentSheet().LastScreen();
if( i == 0 )
{
try
{
wxString fname = m_parent->GetUniqueFilenameForCurrentSheet();
wxString ext = PDF_PLOTTER::GetDefaultFileExtension();
plotFileName = createPlotFileName( m_outputDirectoryName,
fname, ext, &reporter );
if( !plotter->OpenFile( plotFileName.GetFullPath() ) )
{
msg.Printf( _( "Unable to create file '%s'.\n" ),
GetChars( plotFileName.GetFullPath() ) );
reporter.Report( msg, REPORTER::RPT_ERROR );
delete plotter;
return;
}
// Open the plotter and do the first page
setupPlotPagePDF( plotter, screen );
plotter->StartPlot();
}
catch( const IO_ERROR& e )
{
// Cannot plot PDF file
msg.Printf( wxT( "PDF Plotter exception: %s" ), GetChars( e.errorText ) );
reporter.Report( msg, REPORTER::RPT_ERROR );
restoreEnvironment( plotter, oldsheetpath );
return;
}
}
else
{
/* For the following pages you need to close the (finished) page,
* reconfigure, and then start a new one */
plotter->ClosePage();
setupPlotPagePDF( plotter, screen );
plotter->StartPage();
}
plotOneSheetPDF( plotter, screen, aPlotFrameRef );
}
// Everything done, close the plot and restore the environment
msg.Printf( _( "Plot: '%s' OK.\n" ), GetChars( plotFileName.GetFullPath() ) );
reporter.Report( msg, REPORTER::RPT_ACTION );
restoreEnvironment( plotter, oldsheetpath );
}
bool NETLIST_OBJECT_LIST::BuildNetListInfo( SCH_SHEET_LIST& aSheets )
{
SCH_SHEET_PATH* sheet;
// Fill list with connected items from the flattened sheet list
for( unsigned i = 0; i < aSheets.size(); i++ )
{
sheet = &aSheets[i];
for( SCH_ITEM* item = sheet->LastScreen()->GetDrawItems(); item; item = item->Next() )
{
item->GetNetListItem( *this, sheet );
}
}
if( size() == 0 )
return false;
// Sort objects by Sheet
SortListbySheet();
sheet = &(GetItem( 0 )->m_SheetPath);
m_lastNetCode = m_lastBusNetCode = 1;
for( unsigned ii = 0, istart = 0; ii < size(); ii++ )
{
NETLIST_OBJECT* net_item = GetItem( ii );
if( net_item->m_SheetPath != *sheet ) // Sheet change
{
sheet = &(net_item->m_SheetPath);
istart = ii;
}
switch( net_item->m_Type )
{
case NET_ITEM_UNSPECIFIED:
wxMessageBox( wxT( "BuildNetListInfo() error" ) );
break;
case NET_PIN:
case NET_PINLABEL:
case NET_SHEETLABEL:
case NET_NOCONNECT:
if( net_item->GetNet() != 0 )
break;
case NET_SEGMENT:
// Test connections point to point type without bus.
if( net_item->GetNet() == 0 )
{
net_item->SetNet( m_lastNetCode );
m_lastNetCode++;
}
pointToPointConnect( net_item, IS_WIRE, istart );
break;
case NET_JUNCTION:
// Control of the junction outside BUS.
if( net_item->GetNet() == 0 )
{
net_item->SetNet( m_lastNetCode );
m_lastNetCode++;
}
segmentToPointConnect( net_item, IS_WIRE, istart );
// Control of the junction, on BUS.
if( net_item->m_BusNetCode == 0 )
{
net_item->m_BusNetCode = m_lastBusNetCode;
m_lastBusNetCode++;
}
segmentToPointConnect( net_item, IS_BUS, istart );
break;
case NET_LABEL:
case NET_HIERLABEL:
case NET_GLOBLABEL:
// Test connections type junction without bus.
if( net_item->GetNet() == 0 )
{
net_item->SetNet( m_lastNetCode );
m_lastNetCode++;
}
segmentToPointConnect( net_item, IS_WIRE, istart );
break;
case NET_SHEETBUSLABELMEMBER:
if( net_item->m_BusNetCode != 0 )
break;
case NET_BUS:
// Control type connections point to point mode bus
if( net_item->m_BusNetCode == 0 )
{
net_item->m_BusNetCode = m_lastBusNetCode;
m_lastBusNetCode++;
}
pointToPointConnect( net_item, IS_BUS, istart );
break;
case NET_BUSLABELMEMBER:
case NET_HIERBUSLABELMEMBER:
case NET_GLOBBUSLABELMEMBER:
// Control connections similar has on BUS
if( net_item->GetNet() == 0 )
{
net_item->m_BusNetCode = m_lastBusNetCode;
m_lastBusNetCode++;
}
segmentToPointConnect( net_item, IS_BUS, istart );
break;
}
}
#if defined(NETLIST_DEBUG) && defined(DEBUG)
std::cout << "\n\nafter sheet local\n\n";
DumpNetTable();
#endif
// Updating the Bus Labels Netcode connected by Bus
connectBusLabels();
// Group objects by label.
for( unsigned ii = 0; ii < size(); ii++ )
{
switch( GetItem( ii )->m_Type )
{
case NET_PIN:
case NET_SHEETLABEL:
case NET_SEGMENT:
case NET_JUNCTION:
case NET_BUS:
case NET_NOCONNECT:
break;
case NET_LABEL:
case NET_GLOBLABEL:
case NET_PINLABEL:
case NET_BUSLABELMEMBER:
case NET_GLOBBUSLABELMEMBER:
labelConnect( GetItem( ii ) );
break;
case NET_SHEETBUSLABELMEMBER:
case NET_HIERLABEL:
case NET_HIERBUSLABELMEMBER:
break;
case NET_ITEM_UNSPECIFIED:
break;
}
}
#if defined(NETLIST_DEBUG) && defined(DEBUG)
std::cout << "\n\nafter sheet global\n\n";
DumpNetTable();
#endif
// Connection between hierarchy sheets
for( unsigned ii = 0; ii < size(); ii++ )
{
if( GetItem( ii )->m_Type == NET_SHEETLABEL
|| GetItem( ii )->m_Type == NET_SHEETBUSLABELMEMBER )
sheetLabelConnect( GetItem( ii ) );
}
// Sort objects by NetCode
SortListbyNetcode();
#if defined(NETLIST_DEBUG) && defined(DEBUG)
std::cout << "\n\nafter qsort()\n";
DumpNetTable();
#endif
// Compress numbers of Netcode having consecutive values.
int NetCode = 0;
m_lastNetCode = 0;
for( unsigned ii = 0; ii < size(); ii++ )
{
if( GetItem( ii )->GetNet() != m_lastNetCode )
{
NetCode++;
m_lastNetCode = GetItem( ii )->GetNet();
}
GetItem( ii )->SetNet( NetCode );
}
// Set the minimal connection info:
setUnconnectedFlag();
// find the best label object to give the best net name to each net
findBestNetNameForEachNet();
return true;
}
void DIALOG_PLOT_SCHEMATIC::createHPGLFile( bool aPlotAll, bool aPlotFrameRef )
{
SCH_SCREEN* screen = m_parent->GetScreen();
SCH_SHEET_PATH oldsheetpath = m_parent->GetCurrentSheet();
/* When printing all pages, the printed page is not the current page.
* In complex hierarchies, we must setup references and other parameters
* in the printed SCH_SCREEN
* because in complex hierarchies a SCH_SCREEN (a schematic drawings)
* is shared between many sheets
*/
SCH_SHEET_LIST sheetList;
if( aPlotAll )
sheetList.BuildSheetList( g_RootSheet );
else
sheetList.push_back( m_parent->GetCurrentSheet() );
REPORTER& reporter = m_MessagesBox->Reporter();
SetHPGLPenWidth();
for( unsigned i = 0; i < sheetList.size(); i++ )
{
m_parent->SetCurrentSheet( sheetList[i] );
m_parent->GetCurrentSheet().UpdateAllScreenReferences();
m_parent->SetSheetNumberAndCount();
screen = m_parent->GetCurrentSheet().LastScreen();
if( !screen ) // LastScreen() may return NULL
screen = m_parent->GetScreen();
const PAGE_INFO& curPage = screen->GetPageSettings();
PAGE_INFO plotPage = curPage;
// if plotting on a page size other than curPage
if( m_HPGLPaperSizeOption->GetSelection() != PAGE_DEFAULT )
plotPage.SetType( plot_sheet_list( m_HPGLPaperSizeOption->GetSelection() ) );
// Calculation of conversion scales.
double plot_scale = (double) plotPage.GetWidthMils() / curPage.GetWidthMils();
// Calculate offsets
wxPoint plotOffset;
wxString msg;
if( GetPlotOriginCenter() )
{
plotOffset.x = plotPage.GetWidthIU() / 2;
plotOffset.y = -plotPage.GetHeightIU() / 2;
}
try
{
wxString fname = m_parent->GetUniqueFilenameForCurrentSheet();
wxString ext = HPGL_PLOTTER::GetDefaultFileExtension();
wxFileName plotFileName = createPlotFileName( m_outputDirectoryName, fname,
ext, &reporter );
LOCALE_IO toggle;
if( Plot_1_Page_HPGL( plotFileName.GetFullPath(), screen, plotPage, plotOffset,
plot_scale, aPlotFrameRef ) )
{
msg.Printf( _( "Plot: '%s' OK.\n" ), GetChars( plotFileName.GetFullPath() ) );
reporter.Report( msg, REPORTER::RPT_ACTION );
}
else
{
msg.Printf( _( "Unable to create file '%s'.\n" ),
GetChars( plotFileName.GetFullPath() ) );
reporter.Report( msg, REPORTER::RPT_ERROR );
}
}
catch( IO_ERROR& e )
{
msg.Printf( wxT( "HPGL Plotter exception: %s"), GetChars( e.errorText ) );
reporter.Report( msg, REPORTER::RPT_ERROR );
}
}
m_parent->SetCurrentSheet( oldsheetpath );
m_parent->GetCurrentSheet().UpdateAllScreenReferences();
m_parent->SetSheetNumberAndCount();
}
void DIALOG_PLOT_SCHEMATIC::createPSFile( bool aPlotAll, bool aPlotFrameRef )
{
SCH_SCREEN* screen = m_parent->GetScreen();
SCH_SHEET_PATH oldsheetpath = m_parent->GetCurrentSheet(); // sheetpath is saved here
PAGE_INFO actualPage; // page size selected in schematic
PAGE_INFO plotPage; // page size selected to plot
/* When printing all pages, the printed page is not the current page.
* In complex hierarchies, we must update component references
* and others parameters in the given printed SCH_SCREEN, accordint to the sheet path
* because in complex hierarchies a SCH_SCREEN (a drawing )
* is shared between many sheets and component references depend on the actual sheet path used
*/
SCH_SHEET_LIST sheetList;
if( aPlotAll )
sheetList.BuildSheetList( g_RootSheet );
else
sheetList.push_back( m_parent->GetCurrentSheet() );
for( unsigned i = 0; i < sheetList.size(); i++ )
{
m_parent->SetCurrentSheet( sheetList[i] );
m_parent->GetCurrentSheet().UpdateAllScreenReferences();
m_parent->SetSheetNumberAndCount();
screen = m_parent->GetCurrentSheet().LastScreen();
actualPage = screen->GetPageSettings();
switch( m_pageSizeSelect )
{
case PAGE_SIZE_A:
plotPage.SetType( wxT( "A" ) );
plotPage.SetPortrait( actualPage.IsPortrait() );
break;
case PAGE_SIZE_A4:
plotPage.SetType( wxT( "A4" ) );
plotPage.SetPortrait( actualPage.IsPortrait() );
break;
case PAGE_SIZE_AUTO:
default:
plotPage = actualPage;
break;
}
double scalex = (double) plotPage.GetWidthMils() / actualPage.GetWidthMils();
double scaley = (double) plotPage.GetHeightMils() / actualPage.GetHeightMils();
double scale = std::min( scalex, scaley );
wxPoint plot_offset;
wxString outputDirName = m_outputDirectoryName->GetValue();
wxString msg;
REPORTER& reporter = m_MessagesBox->Reporter();
try
{
wxString fname = m_parent->GetUniqueFilenameForCurrentSheet();
wxString ext = PS_PLOTTER::GetDefaultFileExtension();
wxFileName plotFileName = createPlotFileName( m_outputDirectoryName,
fname, ext, &reporter );
if( plotOneSheetPS( plotFileName.GetFullPath(), screen, plotPage, plot_offset,
scale, aPlotFrameRef ) )
{
msg.Printf( _( "Plot: '%s' OK.\n" ), GetChars( plotFileName.GetFullPath() ) );
reporter.Report( msg, REPORTER::RPT_ACTION );
}
else
{
// Error
msg.Printf( _( "Unable to create file '%s'.\n" ),
GetChars( plotFileName.GetFullPath() ) );
reporter.Report( msg, REPORTER::RPT_ERROR );
}
}
catch( IO_ERROR& e )
{
msg.Printf( wxT( "PS Plotter exception: %s"), GetChars( e.errorText ) );
reporter.Report( msg, REPORTER::RPT_ERROR );
}
}
m_parent->SetCurrentSheet( oldsheetpath );
m_parent->GetCurrentSheet().UpdateAllScreenReferences();
m_parent->SetSheetNumberAndCount();
}
void DIALOG_PLOT_SCHEMATIC::CreateDXFFile( bool aPlotAll, bool aPlotFrameRef )
{
SCH_EDIT_FRAME* schframe = m_parent;
SCH_SCREEN* screen = schframe->GetScreen();
SCH_SHEET_PATH oldsheetpath = schframe->GetCurrentSheet();
/* When printing all pages, the printed page is not the current page.
* In complex hierarchies, we must setup references and others parameters
* in the printed SCH_SCREEN
* because in complex hierarchies a SCH_SCREEN (a schematic drawings)
* is shared between many sheets
*/
SCH_SHEET_LIST sheetList;
if( aPlotAll )
sheetList.BuildSheetList( g_RootSheet );
else
sheetList.push_back( schframe->GetCurrentSheet() );
REPORTER& reporter = m_MessagesBox->Reporter();
for( unsigned i = 0; i < sheetList.size(); i++ )
{
schframe->SetCurrentSheet( sheetList[i] );
schframe->GetCurrentSheet().UpdateAllScreenReferences();
schframe->SetSheetNumberAndCount();
screen = schframe->GetCurrentSheet().LastScreen();
wxPoint plot_offset;
wxString msg;
try
{
wxString fname = schframe->GetUniqueFilenameForCurrentSheet();
wxString ext = DXF_PLOTTER::GetDefaultFileExtension();
wxFileName plotFileName = createPlotFileName( m_outputDirectoryName, fname,
ext, &reporter );
if( PlotOneSheetDXF( plotFileName.GetFullPath(), screen, plot_offset, 1.0,
aPlotFrameRef ) )
{
msg.Printf( _( "Plot: \"%s\" OK.\n" ), GetChars( plotFileName.GetFullPath() ) );
reporter.Report( msg, REPORTER::RPT_ACTION );
}
else // Error
{
msg.Printf( _( "Unable to create file \"%s\".\n" ),
GetChars( plotFileName.GetFullPath() ) );
reporter.Report( msg, REPORTER::RPT_ERROR );
}
}
catch( IO_ERROR& e )
{
msg.Printf( wxT( "DXF Plotter exception: %s"), GetChars( e.What() ) );
reporter.Report( msg, REPORTER::RPT_ERROR );
schframe->SetCurrentSheet( oldsheetpath );
schframe->GetCurrentSheet().UpdateAllScreenReferences();
schframe->SetSheetNumberAndCount();
return;
}
}
schframe->SetCurrentSheet( oldsheetpath );
schframe->GetCurrentSheet().UpdateAllScreenReferences();
schframe->SetSheetNumberAndCount();
}
