void DIALOG_PLOT_SCHEMATIC::createPDFFile( bool aPlotAll, bool aPlotFrameRef )
{
    SCH_SCREEN*     screen = m_parent->GetScreen();
    SCH_SHEET_PATH  oldsheetpath = m_parent->GetCurrentSheet();     // sheetpath is saved here

    /* When printing all pages, the printed page is not the current page.  In
     * complex hierarchies, we must update component references and others
     * parameters in the given printed SCH_SCREEN, accordint to the sheet path
     * because in complex hierarchies a SCH_SCREEN (a drawing ) is shared
     * between many sheets and component references depend on the actual sheet
     * path used
     */
    SCH_SHEET_LIST sheetList;

    if( aPlotAll )
        sheetList.BuildSheetList( g_RootSheet );
    else
        sheetList.push_back( m_parent->GetCurrentSheet() );

    // Allocate the plotter and set the job level parameter
    PDF_PLOTTER* plotter = new PDF_PLOTTER();
    plotter->SetDefaultLineWidth( GetDefaultLineThickness() );
    plotter->SetColorMode( getModeColor() );
    plotter->SetCreator( wxT( "Eeschema-PDF" ) );

    wxString msg;
    wxFileName plotFileName;
    REPORTER& reporter = m_MessagesBox->Reporter();
    LOCALE_IO toggle;       // Switch the locale to standard C

    for( unsigned i = 0; i < sheetList.size(); i++ )
    {
        m_parent->SetCurrentSheet( sheetList[i] );
        m_parent->GetCurrentSheet().UpdateAllScreenReferences();
        m_parent->SetSheetNumberAndCount();
        screen = m_parent->GetCurrentSheet().LastScreen();

        if( i == 0 )
        {

            try
            {
                wxString fname = m_parent->GetUniqueFilenameForCurrentSheet();
                wxString ext = PDF_PLOTTER::GetDefaultFileExtension();
                plotFileName = createPlotFileName( m_outputDirectoryName,
                                                   fname, ext, &reporter );

                if( !plotter->OpenFile( plotFileName.GetFullPath() ) )
                {
                    msg.Printf( _( "Unable to create file '%s'.\n" ),
                                GetChars( plotFileName.GetFullPath() ) );
                    reporter.Report( msg, REPORTER::RPT_ERROR );
                    delete plotter;
                    return;
                }

                // Open the plotter and do the first page
                setupPlotPagePDF( plotter, screen );
                plotter->StartPlot();
            }
            catch( const IO_ERROR& e )
            {
                // Cannot plot PDF file
                msg.Printf( wxT( "PDF Plotter exception: %s" ), GetChars( e.errorText ) );
                reporter.Report( msg, REPORTER::RPT_ERROR );

                restoreEnvironment( plotter, oldsheetpath );
                return;
            }

        }
        else
        {
            /* For the following pages you need to close the (finished) page,
             *  reconfigure, and then start a new one */
            plotter->ClosePage();
            setupPlotPagePDF( plotter, screen );
            plotter->StartPage();
        }

        plotOneSheetPDF( plotter, screen, aPlotFrameRef );
    }

    // Everything done, close the plot and restore the environment
    msg.Printf( _( "Plot: '%s' OK.\n" ), GetChars( plotFileName.GetFullPath() ) );
    reporter.Report( msg, REPORTER::RPT_ACTION );

    restoreEnvironment( plotter, oldsheetpath );
}
void DIALOG_PLOT_SCHEMATIC::createHPGLFile( bool aPlotAll, bool aPlotFrameRef )
{
    SCH_SCREEN*     screen = m_parent->GetScreen();
    SCH_SHEET_PATH  oldsheetpath = m_parent->GetCurrentSheet();

    /* When printing all pages, the printed page is not the current page.
     *  In complex hierarchies, we must setup references and other parameters
     *  in the printed SCH_SCREEN
     *  because in complex hierarchies a SCH_SCREEN (a schematic drawings)
     *  is shared between many sheets
     */
    SCH_SHEET_LIST  sheetList;

    if( aPlotAll )
        sheetList.BuildSheetList( g_RootSheet );
    else
        sheetList.push_back( m_parent->GetCurrentSheet() );

    REPORTER& reporter = m_MessagesBox->Reporter();

    SetHPGLPenWidth();

    for( unsigned i = 0; i < sheetList.size(); i++ )
    {
        m_parent->SetCurrentSheet( sheetList[i] );
        m_parent->GetCurrentSheet().UpdateAllScreenReferences();
        m_parent->SetSheetNumberAndCount();

        screen = m_parent->GetCurrentSheet().LastScreen();

        if( !screen ) // LastScreen() may return NULL
            screen = m_parent->GetScreen();

        const PAGE_INFO&    curPage = screen->GetPageSettings();

        PAGE_INFO           plotPage = curPage;

        // if plotting on a page size other than curPage
        if( m_HPGLPaperSizeOption->GetSelection() != PAGE_DEFAULT )
            plotPage.SetType( plot_sheet_list( m_HPGLPaperSizeOption->GetSelection() ) );

        // Calculation of conversion scales.
        double  plot_scale = (double) plotPage.GetWidthMils() / curPage.GetWidthMils();

        // Calculate offsets
        wxPoint plotOffset;
        wxString msg;

        if( GetPlotOriginCenter() )
        {
            plotOffset.x    = plotPage.GetWidthIU() / 2;
            plotOffset.y    = -plotPage.GetHeightIU() / 2;
        }

        try
        {
            wxString fname = m_parent->GetUniqueFilenameForCurrentSheet();
            wxString ext = HPGL_PLOTTER::GetDefaultFileExtension();
            wxFileName plotFileName = createPlotFileName( m_outputDirectoryName, fname,
                                                          ext, &reporter );

            LOCALE_IO toggle;

            if( Plot_1_Page_HPGL( plotFileName.GetFullPath(), screen, plotPage, plotOffset,
                                  plot_scale, aPlotFrameRef ) )
            {
                msg.Printf( _( "Plot: '%s' OK.\n" ), GetChars( plotFileName.GetFullPath() ) );
                reporter.Report( msg, REPORTER::RPT_ACTION );
            }
            else
            {
                msg.Printf( _( "Unable to create file '%s'.\n" ),
                            GetChars( plotFileName.GetFullPath() ) );
                reporter.Report( msg, REPORTER::RPT_ERROR );
            }
        }
        catch( IO_ERROR& e )
        {
            msg.Printf( wxT( "HPGL Plotter exception: %s"), GetChars( e.errorText ) );
            reporter.Report( msg, REPORTER::RPT_ERROR );
        }

    }

    m_parent->SetCurrentSheet( oldsheetpath );
    m_parent->GetCurrentSheet().UpdateAllScreenReferences();
    m_parent->SetSheetNumberAndCount();
}
void DIALOG_PLOT_SCHEMATIC::createPSFile( bool aPlotAll, bool aPlotFrameRef )
{
    SCH_SCREEN*     screen = m_parent->GetScreen();
    SCH_SHEET_PATH  oldsheetpath = m_parent->GetCurrentSheet();  // sheetpath is saved here
    PAGE_INFO       actualPage;                                  // page size selected in schematic
    PAGE_INFO       plotPage;                                    // page size selected to plot

    /* When printing all pages, the printed page is not the current page.
     * In complex hierarchies, we must update component references
     *  and others parameters in the given printed SCH_SCREEN, accordint to the sheet path
     *  because in complex hierarchies a SCH_SCREEN (a drawing )
     *  is shared between many sheets and component references depend on the actual sheet path used
     */
    SCH_SHEET_LIST  sheetList;

    if( aPlotAll )
        sheetList.BuildSheetList( g_RootSheet );
    else
        sheetList.push_back( m_parent->GetCurrentSheet() );

    for( unsigned i = 0; i < sheetList.size(); i++ )
    {
        m_parent->SetCurrentSheet( sheetList[i] );
        m_parent->GetCurrentSheet().UpdateAllScreenReferences();
        m_parent->SetSheetNumberAndCount();
        screen = m_parent->GetCurrentSheet().LastScreen();
        actualPage = screen->GetPageSettings();

        switch( m_pageSizeSelect )
        {
        case PAGE_SIZE_A:
            plotPage.SetType( wxT( "A" ) );
            plotPage.SetPortrait( actualPage.IsPortrait() );
            break;

        case PAGE_SIZE_A4:
            plotPage.SetType( wxT( "A4" ) );
            plotPage.SetPortrait( actualPage.IsPortrait() );
            break;

        case PAGE_SIZE_AUTO:
        default:
            plotPage = actualPage;
            break;
        }

        double  scalex  = (double) plotPage.GetWidthMils() / actualPage.GetWidthMils();
        double  scaley  = (double) plotPage.GetHeightMils() / actualPage.GetHeightMils();

        double  scale = std::min( scalex, scaley );

        wxPoint plot_offset;

        wxString outputDirName = m_outputDirectoryName->GetValue();

        wxString msg;
        REPORTER& reporter = m_MessagesBox->Reporter();

        try
        {
            wxString fname = m_parent->GetUniqueFilenameForCurrentSheet();
            wxString ext = PS_PLOTTER::GetDefaultFileExtension();
            wxFileName plotFileName = createPlotFileName( m_outputDirectoryName,
                                                          fname, ext, &reporter );

            if( plotOneSheetPS( plotFileName.GetFullPath(), screen, plotPage, plot_offset,
                                scale, aPlotFrameRef ) )
            {
                msg.Printf( _( "Plot: '%s' OK.\n" ), GetChars( plotFileName.GetFullPath() ) );
                reporter.Report( msg, REPORTER::RPT_ACTION );
            }
            else
            {
                // Error
                msg.Printf( _( "Unable to create file '%s'.\n" ),
                            GetChars( plotFileName.GetFullPath() ) );
                reporter.Report( msg, REPORTER::RPT_ERROR );
            }

        }
        catch( IO_ERROR& e )
        {
            msg.Printf( wxT( "PS Plotter exception: %s"), GetChars( e.errorText ) );
            reporter.Report( msg, REPORTER::RPT_ERROR );
        }
    }

    m_parent->SetCurrentSheet( oldsheetpath );
    m_parent->GetCurrentSheet().UpdateAllScreenReferences();
    m_parent->SetSheetNumberAndCount();
}
示例#4
0
void DIALOG_PLOT_SCHEMATIC::CreateDXFFile( bool aPlotAll, bool aPlotFrameRef )
{
    SCH_EDIT_FRAME* schframe  = m_parent;
    SCH_SCREEN*     screen    = schframe->GetScreen();
    SCH_SHEET_PATH  oldsheetpath = schframe->GetCurrentSheet();

    /* When printing all pages, the printed page is not the current page.
     *  In complex hierarchies, we must setup references and others parameters
     * in the printed SCH_SCREEN
     *  because in complex hierarchies a SCH_SCREEN (a schematic drawings)
     *  is shared between many sheets
     */
    SCH_SHEET_LIST sheetList;

    if( aPlotAll )
        sheetList.BuildSheetList( g_RootSheet );
    else
        sheetList.push_back( schframe->GetCurrentSheet() );

    REPORTER& reporter = m_MessagesBox->Reporter();

    for( unsigned i = 0; i < sheetList.size();  i++ )
    {
        schframe->SetCurrentSheet( sheetList[i] );
        schframe->GetCurrentSheet().UpdateAllScreenReferences();
        schframe->SetSheetNumberAndCount();
        screen = schframe->GetCurrentSheet().LastScreen();

        wxPoint plot_offset;
        wxString msg;

        try
        {
            wxString fname = schframe->GetUniqueFilenameForCurrentSheet();
            wxString ext = DXF_PLOTTER::GetDefaultFileExtension();
            wxFileName plotFileName = createPlotFileName( m_outputDirectoryName, fname,
                                                          ext, &reporter );

            if( PlotOneSheetDXF( plotFileName.GetFullPath(), screen, plot_offset, 1.0,
                                 aPlotFrameRef ) )
            {
                msg.Printf( _( "Plot: \"%s\" OK.\n" ), GetChars( plotFileName.GetFullPath() ) );
                reporter.Report( msg, REPORTER::RPT_ACTION );
            }
            else    // Error
            {
                msg.Printf( _( "Unable to create file \"%s\".\n" ),
                            GetChars( plotFileName.GetFullPath() ) );
                reporter.Report( msg, REPORTER::RPT_ERROR );
            }
        }
        catch( IO_ERROR& e )
        {
            msg.Printf( wxT( "DXF Plotter exception: %s"), GetChars( e.What() ) );
            reporter.Report( msg, REPORTER::RPT_ERROR );
            schframe->SetCurrentSheet( oldsheetpath );
            schframe->GetCurrentSheet().UpdateAllScreenReferences();
            schframe->SetSheetNumberAndCount();
            return;
        }
    }

    schframe->SetCurrentSheet( oldsheetpath );
    schframe->GetCurrentSheet().UpdateAllScreenReferences();
    schframe->SetSheetNumberAndCount();
}