void EffectLeveller::PopulateOrExchange(ShuttleGui & S)
{
wxASSERT(kNumPasses == WXSIZEOF(kPassStrings));
wxArrayString passChoices;
for (int i = 0; i < kNumPasses; i++)
{
passChoices.Add(wxGetTranslation(kPassStrings[i]));
}
wxArrayString dBChoices(Enums::NumDbChoices,Enums::GetDbChoices());
S.SetBorder(5);
S.StartVerticalLay();
{
S.AddSpace(5);
S.StartMultiColumn(2, wxALIGN_CENTER);
{
S.AddChoice(_("Degree of Leveling:"),
wxT(""),
&passChoices)->SetValidator(wxGenericValidator(&mPassIndex));
S.AddChoice(_("Noise Threshold:"),
wxT(""),
&dBChoices)->SetValidator(wxGenericValidator(&mDbIndex));
}
S.EndMultiColumn();
}
S.EndVerticalLay();
return;
}
void TimeDialog::PopulateOrExchange(ShuttleGui &S)
{
S.SetBorder(5);
S.StartVerticalLay(true);
{
S.StartStatic(mPrompt, true);
{
mTimeCtrl = new
TimeTextCtrl(this,
wxID_ANY,
wxT(""),
mTime,
mRate,
wxDefaultPosition,
wxDefaultSize,
true);
mTimeCtrl->SetName(mPrompt);
mTimeCtrl->SetFormatString(mTimeCtrl->GetBuiltinFormat(mFormat));
S.AddWindow(mTimeCtrl);
mTimeCtrl->EnableMenu();
}
S.EndStatic();
}
S.EndVerticalLay();
S.AddStandardButtons();
TransferDataToWindow();
Layout();
Fit();
SetMinSize(GetSize());
Center();
}
void EffectSilence::PopulateOrExchange(ShuttleGui & S)
{
S.StartVerticalLay();
{
S.StartHorizontalLay();
{
S.AddPrompt(_("Duration:"));
mDurationT = new
NumericTextCtrl(NumericConverter::TIME,
S.GetParent(),
wxID_ANY,
GetDurationFormat(),
GetDuration(),
mProjectRate,
wxDefaultPosition,
wxDefaultSize,
true);
mDurationT->SetName(_("Duration"));
mDurationT->EnableMenu();
S.AddWindow(mDurationT, wxALIGN_CENTER | wxALL);
}
S.EndHorizontalLay();
}
S.EndVerticalLay();
return;
}
void MacroCommandDialog::PopulateOrExchange(ShuttleGui &S)
{
S.StartVerticalLay(true);
{
S.StartMultiColumn(4, wxEXPAND);
{
S.SetStretchyCol(1);
mCommand = S.AddTextBox(_("&Command"), wxT(""), 20);
mCommand->SetEditable(false);
mEditParams = S.Id(EditParamsButtonID).AddButton(_("&Edit Parameters"));
mEditParams->Enable(false); // disable button as box is empty
mUsePreset = S.Id(UsePresetButtonID).AddButton(_("&Use Preset"));
mUsePreset->Enable(false); // disable button as box is empty
}
S.EndMultiColumn();
S.StartMultiColumn(2, wxEXPAND);
{
S.SetStretchyCol(1);
mParameters = S.AddTextBox(_("&Parameters"), wxT(""), 0);
mParameters->SetEditable(false);
wxString prompt{_("&Details")};
S.Prop(0).AddPrompt(prompt);
mDetails = S.AddTextWindow( wxT(""));
mDetails->SetEditable(false);
mDetails->SetName(wxStripMenuCodes(prompt));
}
S.EndMultiColumn();
S.Prop(10).StartStatic(_("Choose command"), true);
{
S.SetStyle(wxSUNKEN_BORDER | wxLC_LIST | wxLC_SINGLE_SEL);
mChoices = S.Id(CommandsListID).AddListControl();
}
S.EndStatic();
}
S.EndVerticalLay();
S.AddStandardButtons( eOkButton | eCancelButton | eHelpButton);
PopulateCommandList();
if (mChoices->GetItemCount() > 0) {
// set first item to be selected (and the focus when the
// list first becomes the focus)
mChoices->SetItemState(0, wxLIST_STATE_FOCUSED | wxLIST_STATE_SELECTED,
wxLIST_STATE_FOCUSED | wxLIST_STATE_SELECTED);
}
SetMinSize(wxSize(780, 560));
Fit();
Center();
}
/// Defines the dialog and does data exchange with it.
void BatchProcessDialog::PopulateOrExchange(ShuttleGui &S)
{
S.StartVerticalLay(true);
{
/*i18n-hint: A chain is a sequence of commands that can be applied
* to one or more audio files.*/
S.StartStatic(_("&Select Chain"), true);
{
S.SetStyle(wxSUNKEN_BORDER | wxLC_REPORT | wxLC_HRULES | wxLC_VRULES |
wxLC_SINGLE_SEL);
mChains = S.Id(ChainsListID).AddListControlReportMode();
mChains->InsertColumn(0, _("Chain"), wxLIST_FORMAT_LEFT);
}
S.EndStatic();
S.StartHorizontalLay(wxALIGN_RIGHT, false);
{
S.SetBorder(10);
S.Id(ApplyToProjectID).AddButton(_("Apply to Current &Project"));
S.Id(ApplyToFilesID).AddButton(_("Apply to &Files..."));
S.Id(wxID_CANCEL).AddButton(_("&Cancel"));
}
S.EndHorizontalLay();
}
S.EndVerticalLay();
wxArrayString names = mBatchCommands.GetNames();
for (int i = 0; i < (int)names.GetCount(); i++) {
mChains->InsertItem(i, names[i]);
}
// Get and validate the currently active chain
wxString name = gPrefs->Read(wxT("/Batch/ActiveChain"), wxT(""));
int item = mChains->FindItem(-1, name);
if (item == -1) {
item = 0;
name = mChains->GetItemText(0);
}
// Select the name in the list...this will fire an event.
mChains->SetItemState(item, wxLIST_STATE_SELECTED, wxLIST_STATE_SELECTED);
Layout();
Fit();
SetSizeHints(GetSize());
Center();
// Set the column size for the chains list.
wxSize sz = mChains->GetClientSize();
mChains->SetColumnWidth(0, sz.x);
}
void SoundActivatedRecord::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(5);
int dBRange;
S.StartVerticalLay();
{
S.StartMultiColumn(2, wxEXPAND);
S.SetStretchyCol(1);
dBRange = gPrefs->Read(ENV_DB_KEY, ENV_DB_RANGE);
S.TieSlider(_("Activation level (dB):"), wxT("/AudioIO/SilenceLevel"), -50, 0, -dBRange);
S.EndMultiColumn();
}
S.EndVerticalLay();
S.AddStandardButtons();
}
void ExportMP2Options::PopulateOrExchange(ShuttleGui & S)
{
S.StartVerticalLay();
{
S.StartHorizontalLay(wxCENTER);
{
S.StartMultiColumn(2, wxCENTER);
{
S.TieChoice(_("Bit Rate:"), wxT("/FileFormats/MP2Bitrate"),
160, mBitRateNames, mBitRateLabels);
}
S.EndMultiColumn();
}
S.EndHorizontalLay();
}
S.EndVerticalLay();
}
void SplashDialog::Populate( ShuttleGui & S )
{
this->SetBackgroundColour(theTheme.Colour( clrAboutBoxBackground ));
bool bShow;
gPrefs->Read(wxT("/GUI/ShowSplashScreen"), &bShow, true );
S.StartVerticalLay(1);
//v For now, change to AudacityLogoWithName via old-fashioned ways, not Theme.
m_pLogo = new wxBitmap((const char **) AudacityLogoWithName_xpm); //v
// JKC: Resize to 50% of size. Later we may use a smaller xpm as
// our source, but this allows us to tweak the size - if we want to.
// It also makes it easier to revert to full size if we decide to.
const float fScale=0.5f;// smaller size.
wxImage RescaledImage( m_pLogo->ConvertToImage() );
// wxIMAGE_QUALITY_HIGH not supported by wxWidgets 2.6.1, or we would use it here.
RescaledImage.Rescale( int(LOGOWITHNAME_WIDTH * fScale), int(LOGOWITHNAME_HEIGHT *fScale) );
wxBitmap RescaledBitmap( RescaledImage );
m_pIcon =
new wxStaticBitmap(S.GetParent(), -1,
//*m_pLogo, //v theTheme.Bitmap(bmpAudacityLogoWithName),
RescaledBitmap,
wxDefaultPosition,
wxSize(int(LOGOWITHNAME_WIDTH*fScale), int(LOGOWITHNAME_HEIGHT*fScale)));
S.Prop(0).AddWindow( m_pIcon );
mpHtml = new LinkingHtmlWindow(S.GetParent(), -1,
wxDefaultPosition,
wxSize(506, 280),
wxHW_SCROLLBAR_AUTO | wxSUNKEN_BORDER );
mpHtml->SetPage(HelpText( wxT("welcome") ));
S.Prop(1).AddWindow( mpHtml, wxEXPAND );
S.Prop(0).StartMultiColumn(2, wxEXPAND);
S.SetStretchyCol( 1 );// Column 1 is stretchy...
{
S.SetBorder( 5 );
S.Id( DontShowID).AddCheckBox( _("Don't show this again at start up"), bShow ? wxT("false") : wxT("true") );
wxButton *ok = new wxButton(S.GetParent(), wxID_OK);
ok->SetDefault();
S.SetBorder( 5 );
S.Prop(0).AddWindow( ok, wxALIGN_RIGHT| wxALL );
}
S.EndVerticalLay();
}
void PopulateOrExchange(ShuttleGui & S)
{
wxString text;
S.SetBorder(10);
S.StartVerticalLay(true);
{
text.Printf(_("Audacity needs the file '%s' to import and export audio via FFmpeg."), mName.c_str());
S.AddTitle(text);
S.SetBorder(3);
S.StartHorizontalLay(wxALIGN_LEFT, true);
{
text.Printf(_("Location of '%s':"), mName.c_str());
S.AddTitle(text);
}
S.EndHorizontalLay();
S.StartMultiColumn(2, wxEXPAND);
S.SetStretchyCol(0);
{
if (mLibPath.GetFullPath().IsEmpty()) {
text.Printf(_("To find '%s', click here -->"), mName.c_str());
mPathText = S.AddTextBox(wxT(""), text, 0);
}
else {
mPathText = S.AddTextBox(wxT(""), mLibPath.GetFullPath(), 0);
}
S.Id(ID_FFMPEG_BROWSE).AddButton(_("Browse..."), wxALIGN_RIGHT);
S.AddVariableText(_("To get a free copy of FFmpeg, click here -->"), true);
S.Id(ID_FFMPEG_DLOAD).AddButton(_("Download"), wxALIGN_RIGHT);
}
S.EndMultiColumn();
S.AddStandardButtons();
}
S.EndVerticalLay();
Layout();
Fit();
SetMinSize(GetSize());
Center();
return;
}
void ExportOGGOptions::PopulateOrExchange(ShuttleGui & S)
{
S.StartVerticalLay();
{
S.StartHorizontalLay(wxEXPAND);
{
S.SetSizerProportion(1);
S.StartMultiColumn(2, wxCENTER);
{
S.SetStretchyCol(1);
S.Prop(1).TieSlider(_("Quality:"), mOggQualityUnscaled, 10);
}
S.EndMultiColumn();
}
S.EndHorizontalLay();
}
S.EndVerticalLay();
}
void NormalizeDialog::PopulateOrExchange(ShuttleGui & S)
{
wxTextValidator vld(wxFILTER_NUMERIC);
S.StartHorizontalLay(wxCENTER, false);
{
S.AddTitle(_("by Dominic Mazzoni"));
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxCENTER, false);
{
// Add a little space
}
S.EndHorizontalLay();
S.StartTwoColumn();
{
S.StartVerticalLay(false);
{
mDCCheckBox = S.Id(ID_DC_REMOVE).AddCheckBox(_("Remove any DC offset (center on 0.0 vertically)"),
mDC ? wxT("true") : wxT("false"));
mGainCheckBox = S.Id(ID_NORMALIZE_AMPLITUDE).AddCheckBox(_("Normalize maximum amplitude to:"),
mGain ? wxT("true") : wxT("false"));
S.StartHorizontalLay(wxALIGN_CENTER, false);
{
mLevelTextCtrl = S.Id(ID_LEVEL_TEXT).AddTextBox(wxT(""), wxT(""), 10);
mLevelTextCtrl->SetValidator(vld);
mLevelTextCtrl->SetName(_("Maximum amplitude dB"));
mLeveldB = S.AddVariableText(_("dB"), false,
wxALIGN_CENTER_VERTICAL | wxALIGN_LEFT);
mWarning = S.AddVariableText( wxT(""), false,
wxALIGN_CENTER_VERTICAL | wxALIGN_LEFT);
}
S.EndHorizontalLay();
mStereoIndCheckBox = S.AddCheckBox(_("Normalize stereo channels independently"),
mStereoInd ? wxT("true") : wxT("false"));
}
S.EndVerticalLay();
}
S.EndTwoColumn();
}
void BatchCommandDialog::PopulateOrExchange(ShuttleGui &S)
{
S.StartVerticalLay(true);
{
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol(1);
mCommand = S.AddTextBox(_("&Command"), wxT(""), 20);
mCommand->SetEditable(false);
mEditParams = S.Id(EditParamsButtonID).AddButton(_("&Edit Parameters"));
mEditParams->Enable( false ); // disable button as box is empty
}
S.EndMultiColumn();
S.StartMultiColumn(2, wxEXPAND);
{
S.SetStretchyCol(1);
mParameters = S.AddTextBox(_("&Parameters"), wxT(""), 0);
mParameters->SetEditable(false);
}
S.EndMultiColumn();
S.StartStatic(_("C&hoose command"), true);
{
S.SetStyle(wxSUNKEN_BORDER | wxLC_LIST | wxLC_SINGLE_SEL);
mChoices = S.Id(CommandsListID).AddListControl();
}
S.EndStatic();
}
S.EndVerticalLay();
S.AddStandardButtons();
for(int i=0;i<99;i++)
{
mChoices->InsertItem( i, wxString::Format(wxT("Item%02i"),i));
}
PopulateCommandList();
SetSize(350, 400);
SetSizeHints(GetSize());
Center();
}
void ExportFLACOptions::PopulateOrExchange(ShuttleGui & S)
{
wxArrayString flacLevelNames, flacLevelLabels;
flacLevelLabels.Add(wxT("0")); flacLevelNames.Add(_("0 (fastest)"));
flacLevelLabels.Add(wxT("1")); flacLevelNames.Add(_("1"));
flacLevelLabels.Add(wxT("2")); flacLevelNames.Add(_("2"));
flacLevelLabels.Add(wxT("3")); flacLevelNames.Add(_("3"));
flacLevelLabels.Add(wxT("4")); flacLevelNames.Add(_("4"));
flacLevelLabels.Add(wxT("5")); flacLevelNames.Add(_("5"));
flacLevelLabels.Add(wxT("6")); flacLevelNames.Add(_("6"));
flacLevelLabels.Add(wxT("7")); flacLevelNames.Add(_("7"));
flacLevelLabels.Add(wxT("8")); flacLevelNames.Add(_("8 (best)"));
wxArrayString flacBitDepthNames, flacBitDepthLabels;
flacBitDepthLabels.Add(wxT("16")); flacBitDepthNames.Add(_("16 bit"));
flacBitDepthLabels.Add(wxT("24")); flacBitDepthNames.Add(_("24 bit"));
S.StartVerticalLay();
{
S.StartHorizontalLay(wxCENTER);
{
S.StartMultiColumn(2, wxCENTER);
{
S.TieChoice(_("Level:"), wxT("/FileFormats/FLACLevel"),
wxT("5"), flacLevelNames, flacLevelLabels);
S.TieChoice(_("Bit depth:"), wxT("/FileFormats/FLACBitDepth"),
wxT("16"), flacBitDepthNames, flacBitDepthLabels);
}
S.EndMultiColumn();
}
S.EndHorizontalLay();
}
S.EndVerticalLay();
return;
}
void EffectChangeTempo::PopulateOrExchange(ShuttleGui & S)
{
S.StartVerticalLay(0);
{
S.AddSpace(0, 5);
S.AddTitle(_("Change Tempo without Changing Pitch"));
S.SetBorder(5);
//
S.StartMultiColumn(2, wxCENTER);
{
FloatingPointValidator<double> vldPercentage(3, &m_PercentChange, NUM_VAL_THREE_TRAILING_ZEROES);
vldPercentage.SetRange(MIN_Percentage, MAX_Percentage);
m_pTextCtrl_PercentChange = S.Id(ID_PercentChange)
.AddTextBox(_("Percent Change:"), wxT(""), 12);
m_pTextCtrl_PercentChange->SetValidator(vldPercentage);
}
S.EndMultiColumn();
//
S.StartHorizontalLay(wxEXPAND);
{
S.SetStyle(wxSL_HORIZONTAL);
m_pSlider_PercentChange = S.Id(ID_PercentChange)
.AddSlider(wxT(""), 0, (int)kSliderMax, (int)MIN_Percentage);
m_pSlider_PercentChange->SetName(_("Percent Change"));
}
S.EndHorizontalLay();
//
S.StartMultiColumn(5, wxCENTER);
{
//
S.AddUnits(_("Beats per minute:"));
FloatingPointValidator<double> vldFromBPM(3, &m_FromBPM, NUM_VAL_THREE_TRAILING_ZEROES | NUM_VAL_ZERO_AS_BLANK);
m_pTextCtrl_FromBPM = S.Id(ID_FromBPM)
.AddTextBox(_("from"), wxT(""), 12);
m_pTextCtrl_FromBPM->SetName(_("From beats per minute"));
m_pTextCtrl_FromBPM->SetValidator(vldFromBPM);
FloatingPointValidator<double> vldToBPM(3, &m_ToBPM, NUM_VAL_THREE_TRAILING_ZEROES | NUM_VAL_ZERO_AS_BLANK);
m_pTextCtrl_ToBPM = S.Id(ID_ToBPM)
.AddTextBox(_("to"), wxT(""), 12);
m_pTextCtrl_ToBPM->SetName(_("To beats per minute"));
m_pTextCtrl_ToBPM->SetValidator(vldToBPM);
//
S.AddUnits(_("Length (seconds):"));
int precission = 2;
FloatingPointValidator<double> vldFromLength(precission, &m_FromLength, NUM_VAL_TWO_TRAILING_ZEROES);
m_pTextCtrl_FromLength = S.Id(ID_FromLength)
.AddTextBox(_("from"), wxT(""), 12);
m_pTextCtrl_FromLength->SetName(_("From length in seconds"));
m_pTextCtrl_FromLength->SetValidator(vldFromLength);
m_pTextCtrl_FromLength->Enable(false); // Disable because the value comes from the user selection.
FloatingPointValidator<double> vldToLength(2, &m_ToLength, NUM_VAL_TWO_TRAILING_ZEROES);
// min and max need same precision as what we're validating (bug 963)
double minLength = (m_FromLength * 100.0) / (100.0 + MAX_Percentage);
double maxLength = (m_FromLength * 100.0) / (100.0 + MIN_Percentage);
minLength = Internat::CompatibleToDouble(Internat::ToString(minLength, precission));
maxLength = Internat::CompatibleToDouble(Internat::ToString(maxLength, precission));
vldToLength.SetRange(minLength, maxLength);
m_pTextCtrl_ToLength = S.Id(ID_ToLength)
.AddTextBox(_("to"), wxT(""), 12);
m_pTextCtrl_ToLength->SetName(_("To length in seconds"));
m_pTextCtrl_ToLength->SetValidator(vldToLength);
}
S.EndMultiColumn();
}
S.EndVerticalLay();
return;
}
void TagsEditor::PopulateOrExchange(ShuttleGui & S)
{
bool bShow;
gPrefs->Read(wxT("/AudioFiles/ShowId3Dialog"), &bShow, true );
S.StartVerticalLay();
{
S.StartHorizontalLay(wxALIGN_LEFT, 0);
{
S.AddUnits(_("Use arrow keys (or ENTER key after editing) to navigate fields."));
}
S.EndHorizontalLay();
if (mGrid == NULL) {
mGrid = safenew Grid(S.GetParent(),
wxID_ANY,
wxDefaultPosition,
wxDefaultSize,
wxSUNKEN_BORDER);
mGrid->RegisterDataType(wxT("Combo"),
(mStringRenderer = safenew wxGridCellStringRenderer),
(mComboEditor = safenew ComboEditor(wxArrayString(), true)));
mGrid->SetColLabelSize(mGrid->GetDefaultRowSize());
auto cs = names();
// Build the initial (empty) grid
mGrid->CreateGrid(0, 2);
mGrid->SetRowLabelSize(0);
mGrid->SetDefaultCellAlignment(wxALIGN_LEFT, wxALIGN_CENTER);
mGrid->SetColLabelValue(0, _("Tag"));
mGrid->SetColLabelValue(1, _("Value"));
// Resize the name column and set default row height.
wxComboBox tc(this, wxID_ANY, wxT(""), wxDefaultPosition, wxDefaultSize, cs);
mGrid->SetColSize(0, tc.GetSize().x);
mGrid->SetColMinimalWidth(0, tc.GetSize().x);
}
S.Prop(1);
S.AddWindow(mGrid, wxEXPAND | wxALL);
S.StartMultiColumn(4, wxALIGN_CENTER);
{
S.Id(AddID).AddButton(_("&Add"));
S.Id(RemoveID).AddButton(_("&Remove"));
S.AddTitle( {} );
S.Id(ClearID).AddButton(_("Cl&ear"));
}
S.EndMultiColumn();
S.StartHorizontalLay(wxALIGN_CENTRE, 0);
{
S.StartStatic(_("Genres"));
{
S.StartMultiColumn(4, wxALIGN_CENTER);
{
S.Id(EditID).AddButton(_("E&dit..."));
S.Id(ResetID).AddButton(_("Rese&t..."));
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Template"));
{
S.StartMultiColumn(4, wxALIGN_CENTER);
{
S.Id(LoadID).AddButton(_("&Load..."));
S.Id(SaveID).AddButton(_("&Save..."));
S.AddTitle( {} );
S.Id(SaveDefaultsID).AddButton(_("Set De&fault"));
}
S.EndMultiColumn();
}
S.EndStatic();
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxALIGN_LEFT, 0);
{
S.Id( DontShowID ).AddCheckBox( _("Don't show this when exporting audio"), !bShow );
}
S.EndHorizontalLay();
}
S.EndVerticalLay();
S.AddStandardButtons(eOkButton | eCancelButton | eHelpButton);
}
void TagsEditor::PopulateOrExchange(ShuttleGui & S)
{
S.StartVerticalLay();
{
S.StartHorizontalLay(wxALIGN_LEFT, false);
{
S.AddUnits(_("Use arrow keys (or RETURN key after editing) to navigate fields."));
}
S.EndHorizontalLay();
if (mGrid == NULL) {
mGrid = new Grid(S.GetParent(),
wxID_ANY,
wxDefaultPosition,
wxDefaultSize,
wxSUNKEN_BORDER);
mStringRenderer = new wxGridCellStringRenderer;
mComboEditor = new ComboEditor(wxArrayString(), true);
mGrid->RegisterDataType(wxT("Combo"), mStringRenderer, mComboEditor);
mGrid->SetColLabelSize(mGrid->GetDefaultRowSize());
wxArrayString cs(WXSIZEOF(names), names);
// Build the initial (empty) grid
mGrid->CreateGrid(0, 2);
mGrid->SetRowLabelSize(0);
mGrid->SetDefaultCellAlignment(wxALIGN_LEFT, wxALIGN_CENTER);
mGrid->SetColLabelValue(0, _("Tag"));
mGrid->SetColLabelValue(1, _("Value"));
// Resize the name column and set default row height.
wxComboBox tc(this, wxID_ANY, wxT(""), wxDefaultPosition, wxDefaultSize, cs);
mGrid->SetColSize(0, tc.GetSize().x);
mGrid->SetColMinimalWidth(0, tc.GetSize().x);
}
S.Prop(true);
S.AddWindow(mGrid, wxEXPAND | wxALL);
S.StartMultiColumn(4, wxALIGN_CENTER);
{
S.Id(AddID).AddButton(_("&Add"));
S.Id(RemoveID).AddButton(_("&Remove"));
S.AddTitle(wxT(" "));
S.Id(ClearID).AddButton(_("Cl&ear"));
}
S.EndMultiColumn();
S.StartHorizontalLay(wxALIGN_CENTRE, false);
{
S.StartStatic(_("Genres"));
{
S.StartMultiColumn(4, wxALIGN_CENTER);
{
S.Id(EditID).AddButton(_("E&dit..."));
S.Id(ResetID).AddButton(_("Rese&t..."));
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Template"));
{
S.StartMultiColumn(4, wxALIGN_CENTER);
{
S.Id(LoadID).AddButton(_("&Load..."));
S.Id(SaveID).AddButton(_("&Save..."));
S.AddTitle(wxT(" "));
S.Id(SaveDefaultsID).AddButton(_("Set De&fault"));
}
S.EndMultiColumn();
}
S.EndStatic();
}
S.EndHorizontalLay();
}
S.EndVerticalLay();
S.AddStandardButtons(eOkButton | eCancelButton);
}
void TimerRecordDialog::PopulateOrExchange(ShuttleGui& S)
{
bool bAutoSave = gPrefs->ReadBool("/TimerRecord/AutoSave", false);
bool bAutoExport = gPrefs->ReadBool("/TimerRecord/AutoExport", false);
int iPostTimerRecordAction = gPrefs->ReadLong("/TimerRecord/PostAction", 0);
S.SetBorder(5);
S.StartMultiColumn(2, wxCENTER);
{
S.StartVerticalLay(true);
{
/* i18n-hint: This string is used to configure the controls for times when the recording is
* started and stopped. As such it is important that only the alphabetic parts of the string
* are translated, with the numbers left exactly as they are.
* The 'h' indicates the first number displayed is hours, the 'm' indicates the second number
* displayed is minutes, and the 's' indicates that the third number displayed is seconds.
*/
wxString strFormat = _("099 h 060 m 060 s");
using Options = NumericTextCtrl::Options;
S.StartStatic(_("Start Date and Time"), true);
{
m_pDatePickerCtrl_Start =
safenew wxDatePickerCtrl(this, // wxWindow *parent,
ID_DATEPICKER_START, // wxWindowID id,
m_DateTime_Start); // const wxDateTime& dt = wxDefaultDateTime,
// const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style = wxDP_DEFAULT | wxDP_SHOWCENTURY, const wxValidator& validator = wxDefaultValidator, const wxString& name = "datectrl")
m_pDatePickerCtrl_Start->SetName(_("Start Date"));
m_pDatePickerCtrl_Start->SetRange(wxDateTime::Today(), wxInvalidDateTime); // No backdating.
#if wxUSE_ACCESSIBILITY
m_pDatePickerCtrl_Start->SetAccessible( safenew DatePickerCtrlAx(m_pDatePickerCtrl_Start));
#endif
S.AddWindow(m_pDatePickerCtrl_Start);
m_pTimeTextCtrl_Start = safenew NumericTextCtrl(
this, ID_TIMETEXT_START, NumericConverter::TIME,
wxEmptyString, 0, 44100,
Options{}
.MenuEnabled(false)
.Format(strFormat)
.Value(true, wxDateTime_to_AudacityTime(m_DateTime_Start)));
m_pTimeTextCtrl_Start->SetName(_("Start Time"));
S.AddWindow(m_pTimeTextCtrl_Start);
}
S.EndStatic();
S.StartStatic(_("End Date and Time"), true);
{
m_pDatePickerCtrl_End =
safenew wxDatePickerCtrl(this, // wxWindow *parent,
ID_DATEPICKER_END, // wxWindowID id,
m_DateTime_End); // const wxDateTime& dt = wxDefaultDateTime,
// const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize,
// long style = wxDP_DEFAULT | wxDP_SHOWCENTURY,
// const wxValidator& validator = wxDefaultValidator,
// const wxString& name = "datectrl")
m_pDatePickerCtrl_End->SetRange(m_DateTime_Start, wxInvalidDateTime); // No backdating.
m_pDatePickerCtrl_End->SetName(_("End Date"));
#if wxUSE_ACCESSIBILITY
m_pDatePickerCtrl_End->SetAccessible( safenew DatePickerCtrlAx(m_pDatePickerCtrl_End));
#endif
S.AddWindow(m_pDatePickerCtrl_End);
m_pTimeTextCtrl_End = safenew NumericTextCtrl(
this, ID_TIMETEXT_END, NumericConverter::TIME,
wxEmptyString, 0, 44100,
Options{}
.MenuEnabled(false)
.Format(strFormat)
.Value(true, wxDateTime_to_AudacityTime(m_DateTime_End)));
m_pTimeTextCtrl_End->SetName(_("End Time"));
S.AddWindow(m_pTimeTextCtrl_End);
}
S.EndStatic();
S.StartStatic(_("Duration"), true);
{
/* i18n-hint: This string is used to configure the controls which shows the recording
* duration. As such it is important that only the alphabetic parts of the string
* are translated, with the numbers left exactly as they are.
* The string 'days' indicates that the first number in the control will be the number of days,
* then the 'h' indicates the second number displayed is hours, the 'm' indicates the third
* number displayed is minutes, and the 's' indicates that the fourth number displayed is
* seconds.
*/
wxString strFormat1 = _("099 days 024 h 060 m 060 s");
m_pTimeTextCtrl_Duration = safenew NumericTextCtrl(
this, ID_TIMETEXT_DURATION, NumericConverter::TIME,
wxEmptyString, 0, 44100,
Options{}
.MenuEnabled(false)
.Format(strFormat1)
.Value(true, m_TimeSpan_Duration.GetSeconds().ToDouble()));
m_pTimeTextCtrl_Duration->SetName(_("Duration"));
S.AddWindow(m_pTimeTextCtrl_Duration);
}
S.EndStatic();
}
S.EndVerticalLay();
S.StartVerticalLay(true);
{
S.StartStatic(_("Automatic Save"), true);
{
// If checked, the project will be saved when the recording is completed
m_pTimerAutoSaveCheckBoxCtrl = S.Id(ID_AUTOSAVE_CHECKBOX).AddCheckBox(_("Enable &Automatic Save?"),
(bAutoSave ? "true" : "false"));
S.StartMultiColumn(3, wxEXPAND);
{
wxString sInitialValue = wxT("");
AudacityProject* pProject = GetActiveProject();
wxString sSaveValue = pProject->GetFileName();
if (sSaveValue != wxEmptyString) {
m_fnAutoSaveFile.Assign(sSaveValue);
sInitialValue = _("Current Project");
}
S.AddPrompt(_("Save Project As:"));
m_pTimerSavePathTextCtrl = NewPathControl(this, ID_AUTOSAVEPATH_TEXT, _("Save Project As:"), sInitialValue);
m_pTimerSavePathTextCtrl->SetEditable(false);
S.AddWindow(m_pTimerSavePathTextCtrl);
m_pTimerSavePathButtonCtrl = S.Id(ID_AUTOSAVEPATH_BUTTON).AddButton(_("Select..."));
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Automatic Export"), true);
{
m_pTimerAutoExportCheckBoxCtrl = S.Id(ID_AUTOEXPORT_CHECKBOX).AddCheckBox(_("Enable Automatic &Export?"), (bAutoExport ? "true" : "false"));
S.StartMultiColumn(3, wxEXPAND);
{
S.AddPrompt(_("Export Project As:"));
m_pTimerExportPathTextCtrl = NewPathControl(this, ID_AUTOEXPORTPATH_TEXT, _("Export Project As:"), wxT(""));
m_pTimerExportPathTextCtrl->SetEditable(false);
S.AddWindow(m_pTimerExportPathTextCtrl);
m_pTimerExportPathButtonCtrl = S.Id(ID_AUTOEXPORTPATH_BUTTON).AddButton(_("Select..."));
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Options"), true);
{
wxArrayString arrayOptions;
arrayOptions.Add(_("Do nothing"));
arrayOptions.Add(_("Exit Audacity"));
arrayOptions.Add(_("Restart system"));
arrayOptions.Add(_("Shutdown system"));
m_sTimerAfterCompleteOptionsArray.Add(arrayOptions.Item(0));
m_sTimerAfterCompleteOptionsArray.Add(arrayOptions.Item(1));
#ifdef __WINDOWS__
m_sTimerAfterCompleteOptionsArray.Add(arrayOptions.Item(2));
m_sTimerAfterCompleteOptionsArray.Add(arrayOptions.Item(3));
#endif
m_sTimerAfterCompleteOption = arrayOptions.Item(iPostTimerRecordAction);
m_pTimerAfterCompleteChoiceCtrl = S.AddChoice(_("After Recording completes:"),
m_sTimerAfterCompleteOption,
&m_sTimerAfterCompleteOptionsArray);
}
S.EndStatic();
}
S.EndVerticalLay();
}
S.EndMultiColumn();
// MY: Added the help button here
S.AddStandardButtons(eOkButton | eCancelButton | eHelpButton);
Layout();
Fit();
SetMinSize(GetSize());
Center();
EnableDisableAutoControls(bAutoSave, CONTROL_GROUP_SAVE);
EnableDisableAutoControls(bAutoExport, CONTROL_GROUP_EXPORT);
}
void EffectAutoDuck::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(5);
S.StartVerticalLay(true);
{
S.AddSpace(0, 5);
mPanel = safenew EffectAutoDuckPanel(S.GetParent(), this);
S.AddWindow(mPanel);
S.AddSpace(0, 5);
S.StartMultiColumn(6, wxCENTER);
{
FloatingPointValidator<double> vldDuckAmountDb(1, &mDuckAmountDb, NUM_VAL_NO_TRAILING_ZEROES);
vldDuckAmountDb.SetRange(MIN_DuckAmountDb, MAX_DuckAmountDb);
mDuckAmountDbBox = S.AddTextBox(_("Duck amount:"), wxT(""), 10);
mDuckAmountDbBox->SetValidator(vldDuckAmountDb);
S.AddUnits(_("dB"));
FloatingPointValidator<double> vldMaximumPause(2, &mMaximumPause, NUM_VAL_NO_TRAILING_ZEROES);
vldMaximumPause.SetRange(MIN_MaximumPause, MAX_MaximumPause);
mMaximumPauseBox = S.AddTextBox(_("Maximum pause:"), wxT(""), 10);
mMaximumPauseBox->SetValidator(vldMaximumPause);
S.AddUnits(_("seconds"));
FloatingPointValidator<double> vldOuterFadeDownLen(2, &mOuterFadeDownLen, NUM_VAL_NO_TRAILING_ZEROES);
vldOuterFadeDownLen.SetRange(MIN_OuterFadeDownLen, MAX_OuterFadeDownLen);
mOuterFadeDownLenBox = S.AddTextBox(_("Outer fade down length:"), wxT(""), 10);
mOuterFadeDownLenBox->SetValidator(vldOuterFadeDownLen);
S.AddUnits(_("seconds"));
FloatingPointValidator<double> vldOuterFadeUpLen(2, &mOuterFadeUpLen, NUM_VAL_NO_TRAILING_ZEROES);
vldOuterFadeUpLen.SetRange(MIN_OuterFadeUpLen, MAX_OuterFadeUpLen);
mOuterFadeUpLenBox = S.AddTextBox(_("Outer fade up length:"), wxT(""), 10);
mOuterFadeUpLenBox->SetValidator(vldOuterFadeUpLen);
S.AddUnits(_("seconds"));
FloatingPointValidator<double> vldInnerFadeDownLen(2, &mInnerFadeDownLen, NUM_VAL_NO_TRAILING_ZEROES);
vldInnerFadeDownLen.SetRange(MIN_InnerFadeDownLen, MAX_InnerFadeDownLen);
mInnerFadeDownLenBox = S.AddTextBox(_("Inner fade down length:"), wxT(""), 10);
mInnerFadeDownLenBox->SetValidator(vldInnerFadeDownLen);
S.AddUnits(_("seconds"));
FloatingPointValidator<double> vldInnerFadeUpLen(2, &mInnerFadeUpLen, NUM_VAL_NO_TRAILING_ZEROES);
vldInnerFadeUpLen.SetRange(MIN_InnerFadeUpLen, MAX_InnerFadeUpLen);
mInnerFadeUpLenBox = S.AddTextBox(_("Inner fade up length:"), wxT(""), 10);
mInnerFadeUpLenBox->SetValidator(vldInnerFadeUpLen);
S.AddUnits(_("seconds"));
}
S.EndMultiColumn();
S.StartMultiColumn(3, wxCENTER);
{
FloatingPointValidator<double> vldThresholdDb(2, &mThresholdDb, NUM_VAL_NO_TRAILING_ZEROES);
vldThresholdDb.SetRange(MIN_ThresholdDb, MAX_ThresholdDb);
mThresholdDbBox = S.AddTextBox(_("Threshold:"), wxT(""), 10);
mThresholdDbBox->SetValidator(vldThresholdDb);
S.AddUnits(_("dB"));
}
S.EndMultiColumn();
}
S.EndVerticalLay();
return;
}
void ChangePitchDialog::PopulateOrExchange(ShuttleGui & S)
{
wxTextValidator nullvld(wxFILTER_INCLUDE_CHAR_LIST);
wxTextValidator numvld(wxFILTER_NUMERIC);
wxArrayString pitch;
pitch.Add(wxT("C"));
pitch.Add(wxT("C#/Db"));
pitch.Add(wxT("D"));
pitch.Add(wxT("D#/Eb"));
pitch.Add(wxT("E"));
pitch.Add(wxT("F"));
pitch.Add(wxT("F#/Gb"));
pitch.Add(wxT("G"));
pitch.Add(wxT("G#/Ab"));
pitch.Add(wxT("A"));
pitch.Add(wxT("A#/Bb"));
pitch.Add(wxT("B"));
S.SetBorder(10);
S.StartHorizontalLay(wxCENTER, false);
{
S.AddTitle(_("Change Pitch without Changing Tempo") +
wxString(wxT("\n\n")) +
_("by Vaughan Johnson && Dominic Mazzoni") +
wxString(wxT("\n")) +
_("using SoundTouch, by Olli Parviainen"));
}
S.EndHorizontalLay();
S.SetBorder(5);
//
S.StartMultiColumn(6, wxCENTER);
{
//
S.AddUnits(_("Pitch:"));
S.StartHorizontalLay(wxALIGN_CENTER_VERTICAL);
{
m_pChoice_FromPitch = S.Id(ID_CHOICE_FROMPITCH)
.AddChoice(_("From:"), wxT(""), &pitch);
m_pChoice_FromPitch->SetName(_("From Pitch"));
m_pChoice_FromPitch->SetSizeHints(100, -1);
}
S.EndHorizontalLay();
S.StartStatic(wxT(""));
{
S.StartVerticalLay();
{
S.SetBorder(3);
m_pRadioButton_PitchUp = S.Id(ID_RADIOBUTTON_PITCHUPDOWN)
.AddRadioButton(_("Up"));
m_pRadioButton_PitchDown = S.Id(ID_RADIOBUTTON_PITCHUPDOWN)
.AddRadioButtonToGroup(_("Down"));
S.SetBorder(5);
}
S.EndVerticalLay();
}
S.EndStatic();
S.StartHorizontalLay(wxALIGN_CENTER_VERTICAL);
{
m_pChoice_ToPitch = S.Id(ID_CHOICE_TOPITCH)
.AddChoice(_("To:"), wxT(""), &pitch);
m_pChoice_ToPitch->SetName(_("To Pitch"));
m_pChoice_ToPitch->SetSizeHints(100, -1);
}
S.EndHorizontalLay();
}
S.EndMultiColumn();
//
S.StartMultiColumn(2, wxCENTER);
{
//
S.AddPrompt(_("Semitones (half-steps):"));
S.StartHorizontalLay(wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL, false);
{
m_pTextCtrl_SemitonesChange = S.Id(ID_TEXT_SEMITONESCHANGE)
.AddTextBox(wxT(""), wxT(""), 12);
m_pTextCtrl_SemitonesChange->SetName(_("Semitones in half-steps"));
m_pTextCtrl_SemitonesChange->SetValidator(numvld);
}
S.EndHorizontalLay();
//
S.AddPrompt(_("Frequency (Hz):"));
S.StartHorizontalLay(wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL, false);
{
m_pTextCtrl_FromFrequency = S.Id(ID_TEXT_FROMFREQUENCY)
.AddTextBox(_("from"), wxT(""), 12);
m_pTextCtrl_FromFrequency->SetName(_("From frequency in hertz"));
m_pTextCtrl_FromFrequency->SetValidator(nullvld);
m_pTextCtrl_ToFrequency = S.Id(ID_TEXT_TOFREQUENCY)
.AddTextBox(_("to"), wxT(""), 12);
m_pTextCtrl_ToFrequency->SetName(_("To frequency in seconds"));
m_pTextCtrl_ToFrequency->SetValidator(numvld);
}
S.EndHorizontalLay();
//
S.AddPrompt(_("Percent Change:"));
S.StartHorizontalLay(wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL, false);
{
m_pTextCtrl_PercentChange = S.Id(ID_TEXT_PERCENTCHANGE)
.AddTextBox(wxT(""), wxT(""), 12);
m_pTextCtrl_PercentChange->SetName(_("Percent Change"));
m_pTextCtrl_PercentChange->SetValidator(numvld);
}
S.EndHorizontalLay();
}
S.EndMultiColumn();
//
S.StartHorizontalLay(wxEXPAND);
{
S.SetStyle(wxSL_HORIZONTAL);
m_pSlider_PercentChange = S.Id(ID_SLIDER_PERCENTCHANGE)
.AddSlider(wxT(""), 0, (int)PERCENTCHANGE_MAX, (int)PERCENTCHANGE_MIN);
m_pSlider_PercentChange->SetName(_("Percent Change"));
}
S.EndHorizontalLay();
return;
}
void EffectChangeSpeed::PopulateOrExchange(ShuttleGui & S)
{
GetPrivateConfig(GetCurrentSettingsGroup(), wxT("TimeFormat"), mFormat, mFormat);
GetPrivateConfig(GetCurrentSettingsGroup(), wxT("VinylChoice"), mFromVinyl, mFromVinyl);
S.SetBorder(5);
S.StartVerticalLay(0);
{
S.AddSpace(0, 5);
S.AddTitle(_("Change Speed, affecting both Tempo and Pitch"));
S.AddSpace(0, 10);
// Speed multiplier and percent change controls.
S.StartMultiColumn(4, wxCENTER);
{
FloatingPointValidator<double> vldMultiplier(3, &mMultiplier, NUM_VAL_THREE_TRAILING_ZEROES);
vldMultiplier.SetRange(MIN_Percentage / 100.0, ((MAX_Percentage / 100.0) + 1));
mpTextCtrl_Multiplier =
S.Id(ID_Multiplier).AddTextBox(_("Speed Multiplier:"), wxT(""), 12);
mpTextCtrl_Multiplier->SetValidator(vldMultiplier);
FloatingPointValidator<double> vldPercentage(3, &m_PercentChange, NUM_VAL_THREE_TRAILING_ZEROES);
vldPercentage.SetRange(MIN_Percentage, MAX_Percentage);
mpTextCtrl_PercentChange =
S.Id(ID_PercentChange).AddTextBox(_("Percent Change:"), wxT(""), 12);
mpTextCtrl_PercentChange->SetValidator(vldPercentage);
}
S.EndMultiColumn();
// Percent change slider.
S.StartHorizontalLay(wxEXPAND);
{
S.SetStyle(wxSL_HORIZONTAL);
mpSlider_PercentChange =
S.Id(ID_PercentChange).AddSlider(wxT(""), 0, (int)kSliderMax, (int)MIN_Percentage);
mpSlider_PercentChange->SetName(_("Percent Change"));
}
S.EndHorizontalLay();
// Vinyl rpm controls.
S.StartMultiColumn(5, wxCENTER);
{
/* i18n-hint: "rpm" is an English abbreviation meaning "revolutions per minute". */
S.AddUnits(_("Standard Vinyl rpm:"));
wxASSERT(kNumVinyl == WXSIZEOF(kVinylStrings));
wxArrayString vinylChoices;
for (int i = 0; i < kNumVinyl; i++)
{
if (i == kVinyl_NA)
{
vinylChoices.Add(wxGetTranslation(kVinylStrings[i]));
}
else
{
vinylChoices.Add(kVinylStrings[i]);
}
}
mpChoice_FromVinyl =
S.Id(ID_FromVinyl).AddChoice(_("from"), wxT(""), &vinylChoices);
mpChoice_FromVinyl->SetName(_("From rpm"));
mpChoice_FromVinyl->SetSizeHints(100, -1);
mpChoice_ToVinyl =
S.Id(ID_ToVinyl).AddChoice(_("to"), wxT(""), &vinylChoices);
mpChoice_ToVinyl->SetName(_("To rpm"));
mpChoice_ToVinyl->SetSizeHints(100, -1);
}
S.EndMultiColumn();
// From/To time controls.
S.StartStatic(_("Selection Length"), 0);
{
S.StartMultiColumn(2, wxALIGN_LEFT);
{
S.AddPrompt(_("Current Length:"));
mpFromLengthCtrl = safenew
NumericTextCtrl(NumericConverter::TIME,
S.GetParent(),
wxID_ANY,
mFormat,
mFromLength,
mProjectRate);
mpFromLengthCtrl->SetName(_("from"));
mpFromLengthCtrl->SetToolTip(_("Current length of selection."));
mpFromLengthCtrl->SetReadOnly(true);
mpFromLengthCtrl->EnableMenu(false);
S.AddWindow(mpFromLengthCtrl, wxALIGN_LEFT);
S.AddPrompt(_("New Length:"));
mpToLengthCtrl = safenew
NumericTextCtrl(NumericConverter::TIME,
S.GetParent(),
ID_ToLength,
mFormat,
mToLength,
mProjectRate);
mpToLengthCtrl->SetName(_("to"));
mpToLengthCtrl->EnableMenu();
S.AddWindow(mpToLengthCtrl, wxALIGN_LEFT);
}
S.EndMultiColumn();
}
S.EndStatic();
}
S.EndVerticalLay();
}
void EffectAmplify::PopulateOrExchange(ShuttleGui & S)
{
if (IsBatchProcessing())
{
mPeak = 1.0;
}
else
{
if (mPeak > 0.0)
{
mRatio = 1.0 / mPeak;
mRatioClip = mRatio;
}
else
{
mRatio = 1.0;
}
}
S.AddSpace(0, 5);
S.StartVerticalLay(0);
{
int precission = 3; // allow (a generous) 3 decimal places for Amplification (dB)
// Amplitude
S.StartMultiColumn(2, wxCENTER);
{
FloatingPointValidator<double> vldAmp(precission, &mAmp, NumValidatorStyle::ONE_TRAILING_ZERO);
vldAmp.SetRange(MIN_Amp, MAX_Amp);
mAmpT = S.Id(ID_Amp).AddTextBox(_("Amplification (dB):"), wxT(""), 12);
mAmpT->SetValidator(vldAmp);
}
S.EndMultiColumn();
// Amplitude
S.StartHorizontalLay(wxEXPAND);
{
S.SetStyle(wxSL_HORIZONTAL);
mAmpS = S.Id(ID_Amp).AddSlider( {}, 0, MAX_Amp * SCL_Amp, MIN_Amp * SCL_Amp);
mAmpS->SetName(_("Amplification dB"));
}
S.EndHorizontalLay();
// Peak
S.StartMultiColumn(2, wxCENTER);
{
// One extra decimal place so that rounding is visible to user (see: bug 958)
FloatingPointValidator<double> vldNewPeak(precission + 1, &mNewPeak, NumValidatorStyle::ONE_TRAILING_ZERO);
double minAmp = MIN_Amp + LINEAR_TO_DB(mPeak);
double maxAmp = MAX_Amp + LINEAR_TO_DB(mPeak);
// min and max need same precision as what we're validating (bug 963)
minAmp = Internat::CompatibleToDouble(Internat::ToString(minAmp, precission +1));
maxAmp = Internat::CompatibleToDouble(Internat::ToString(maxAmp, precission +1));
vldNewPeak.SetRange(minAmp, maxAmp);
mNewPeakT = S.Id(ID_Peak).AddTextBox(_("New Peak Amplitude (dB):"), wxT(""), 12);
mNewPeakT->SetValidator(vldNewPeak);
}
S.EndMultiColumn();
// Clipping
S.StartHorizontalLay(wxCENTER);
{
mClip = S.Id(ID_Clip).AddCheckBox(_("Allow clipping"), wxT("false"));
if (IsBatchProcessing())
{
mClip->Enable(false);
mCanClip = true;
}
}
S.EndHorizontalLay();
}
S.EndVerticalLay();
return;
}
void ExportFFmpegOptions::PopulateOrExchange(ShuttleGui & S)
{
S.StartVerticalLay(1);
S.StartMultiColumn(7, wxEXPAND);
{
S.SetStretchyCol(1);
mPresetCombo = S.Id(FEPresetID).AddCombo(_("Preset:"), gPrefs->Read(wxT("/FileFormats/FFmpegPreset"),wxEmptyString), mPresetNames);
mLoadPreset = S.Id(FELoadPresetID).AddButton(_("Load Preset"));
mSavePreset = S.Id(FESavePresetID).AddButton(_("Save Preset"));
mDeletePreset = S.Id(FEDeletePresetID).AddButton(_("Delete Preset"));
mImportPresets = S.Id(FEImportPresetsID).AddButton(_("Import Presets"));
mExportPresets = S.Id(FEExportPresetsID).AddButton(_("Export Presets"));
}
S.EndMultiColumn();
S.StartTwoColumn();
{
S.Id(FEFormatLabelID).AddVariableText(_("Format:"));
mFormatName = S.Id(FEFormatNameID).AddVariableText(wxT(""));
S.Id(FECodecLabelID).AddVariableText(_("Codec:"));
mCodecName = S.Id(FECodecNameID).AddVariableText(wxT(""));
}
S.EndTwoColumn();
S.AddVariableText(_("Not all formats and codecs are compatible. Some parameters (such as bitrate and samplerate) combinations are not compatible with some codecs too."),false);
S.StartMultiColumn(3,wxEXPAND);
{
S.AddVariableText(_("Format selector:"),true);
S.AddVariableText(_("Codec selector:"),true);
S.AddVariableText(wxEmptyString);
S.Id(FEAllFormatsID).AddButton(_("Show All Formats"));
S.Id(FEAllCodecsID).AddButton(_("Show All Codecs"));
S.AddVariableText(wxEmptyString);
mFormatList = S.Id(FEFormatID).AddListBox(&mFormatNames);
mCodecList = S.Id(FECodecID).AddListBox(&mCodecNames);
mFormatList->DeselectAll();
mCodecList->DeselectAll();
S.StartStatic(wxT("Options"),0);
{
S.StartMultiColumn(4,wxALIGN_LEFT);
{
mLanguageText = S.Id(FELanguageID).TieTextBox(_("Language:"), wxT("/FileFormats/FFmpegLanguage"), wxEmptyString, 0);
mLanguageText->SetToolTip(_("ISO 639 3-letter language code\nOptional\nempty - automatic"));
mTag = S.Id(FETagID).TieTextBox(_("Tag:"), wxT("/FileFormats/FFmpegTag"), wxEmptyString, 0);
mTag->SetToolTip(_("Codec tag (FOURCC)\nOptional\nempty - automatic"));
mBitrateSpin = S.Id(FEBitrateID).TieSpinCtrl(_("Bit Rate:"), wxT("/FileFormats/FFmpegBitRate"), 0,1000000,0);
mBitrateSpin->SetToolTip(_("Bit Rate (bits/second) - influences the resulting file size and quality\nSome codecs may only accept specific values (128k, 192k, 256k etc)\n0 - automatic\nRecommended - 192000"));
mQualitySpin = S.Id(FEQualityID).TieSpinCtrl(_("Quality:"), wxT("/FileFormats/FFmpegQuality"), 0,500,-1);
mQualitySpin->SetToolTip(_("Overral quality, used differently by different codecs\nRequired for vorbis\n0 - automatic\n-1 - off (use bitrate instead)"));
mSampleRateSpin = S.Id(FESampleRateID).TieSpinCtrl(_("Sample Rate:"), wxT("/FileFormats/FFmpegSampleRate"), 0,200000,0);
mSampleRateSpin->SetToolTip(_("Sample rate (Hz)\n0 - don't change sample rate"));
mCutoffSpin = S.Id(FECutoffID).TieSpinCtrl(_("Cutoff Bandwidth:"), wxT("/FileFormats/FFmpegCutOff"), 0,10000000,0);
mCutoffSpin->SetToolTip(_("Audio cutoff bandwidth (Hz)\nOptional\n0 - automatic\n"));
S.AddVariableText(wxT("Use Bit Reservoir"));
S.Id(FEBitReservoirID).TieCheckBox(wxEmptyString, wxT("/FileFormats/FFmpegBitReservoir"), true);
mProfileChoice = S.Id(FEProfileID).TieChoice(_("Profile:"), wxT("/FileFormats/FFmpegAACProfile"),
mProfileLabels[0], mProfileNames, mProfileLabels);
mProfileChoice->SetToolTip(_("AAC Profile\nLow Complexity -default\nMost players won't play anything other than LC"));
}
S.EndMultiColumn();
S.StartStatic(wxT("FLAC options"),0);
{
S.StartMultiColumn(4);
{
mCompressionLevelSpin = S.Id(FECompLevelID).TieSpinCtrl(_("Compression Level:"), wxT("/FileFormats/FFmpegCompLevel"), 0,10,-1);
mCompressionLevelSpin->SetToolTip(_("Compression level\nRequired for FLAC\n-1 - automatic\nmin - 0 (fast encoding, large output file)\nmax - 10 (slow encoding, small output file)"));
mFrameSizeSpin = S.Id(FEFrameSizeID).TieSpinCtrl(_("Frame Size:"), wxT("/FileFormats/FFmpegFrameSize"), 0,65535,0);
mFrameSizeSpin->SetToolTip(_("Frame size\nOptional\n0 - default\nmin - 16\nmax - 65535"));
mLPCCoeffsPrecisionSpin = S.Id(FELPCCoeffsID).TieSpinCtrl(_("LPC coefficients precision"), wxT("/FileFormats/FFmpegLPCCoefPrec"), 0,15,0);
mLPCCoeffsPrecisionSpin->SetToolTip(_("LPC coefficients precision\nOptional\n0 - default\nmin - 1\nmax - 15"));
mMinPredictionOrderSpin = S.Id(FEMinPredID).TieSpinCtrl(_("Minimal prediction order"), wxT("/FileFormats/FFmpegMinPredOrder"), -1,32,-1);
mMinPredictionOrderSpin->SetToolTip(_("Minimal prediction order\nOptional\n-1 - default\nmin - 0\nmax - 32 (with LPC) or 4 (without LPC)"));
mMaxPredictionOrderSpin = S.Id(FEMaxPredID).TieSpinCtrl(_("Maximal prediction order"), wxT("/FileFormats/FFmpegMaxPredOrder"), -1,32,-1);
mMaxPredictionOrderSpin->SetToolTip(_("Maximal prediction order\nOptional\n-1 - default\nmin - 0\nmax - 32 (with LPC) or 4 (without LPC)"));
mPredictionOrderMethodChoice = S.Id(FEPredOrderID).TieChoice(_("Prediction Order Method:"), wxT("/FileFormats/FFmpegPredOrderMethod"),
mPredictionOrderMethodLabels[4], mPredictionOrderMethodNames, mPredictionOrderMethodLabels);
mProfileChoice->SetToolTip(_("Prediction Order Method\nEstimate - fastest, lower compression\nLog search - slowest, best compression\nFull search - default"));
mMinPartitionOrderSpin = S.Id(FEMinPartOrderID).TieSpinCtrl(_("Minimal partition order"), wxT("/FileFormats/FFmpegMinPartOrder"), -1,8,-1);
mMinPartitionOrderSpin->SetToolTip(_("Minimal partition order\nOptional\n-1 - default\nmin - 0\nmax - 8"));
mMaxPartitionOrderSpin = S.Id(FEMaxPartOrderID).TieSpinCtrl(_("Maximal partition order"), wxT("/FileFormats/FFmpegMaxPredOrder"), -1,8,-1);
mMaxPartitionOrderSpin->SetToolTip(_("Maximal partition order\nOptional\n-1 - default\nmin - 0\nmax - 8"));
S.AddVariableText(wxT("Use LPC"));
S.Id(FEUseLPCID).TieCheckBox(wxEmptyString, wxT("/FileFormats/FFmpegUseLPC"), true);
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(wxT("MPEG container options"),0);
{
S.StartMultiColumn(4);
{
mMuxRate = S.Id(FEMuxRateID).TieSpinCtrl(_("Mux Rate:"), wxT("/FileFormats/FFmpegMuxRate"), 0,10000000,0);
mMuxRate->SetToolTip(_("Maximum bit rate of the multiplexed stream\nOptional\n0 - default"));
mPacketSize = S.Id(FEPacketSizeID).TieSpinCtrl(_("Packet Size:"), wxT("/FileFormats/FFmpegPacketSize"), 0,10000000,0);
mPacketSize->SetToolTip(_("Packet size\nOptional\n0 - default"));
}
S.EndMultiColumn();
}
S.EndStatic();
}
S.EndStatic();
}
S.EndTwoColumn();
S.EndVerticalLay();
S.AddStandardButtons();
Layout();
Fit();
SetMinSize(GetSize());
Center();
return;
}
void SplashDialog::Populate( ShuttleGui & S )
{
//#if ((AUDACITY_BRANDING == BRAND_JAMLING__EASY) || (AUDACITY_BRANDING == BRAND_JAMLING__FULL))
// this->SetBackgroundColour(wxColour(rrr, ggg, bbb)); // same as waveform color
//#else
// this->SetBackgroundColour(theTheme.Colour( clrAboutBoxBackground ));
//#endif
this->SetBackgroundColour(theTheme.Colour( clrAboutBoxBackground ));
bool bShow;
gPrefs->Read(wxT("/GUI/ShowSplashScreen"), &bShow, true );
S.StartVerticalLay(1);
wxImage buttonImageUp;
wxImage buttonImageOver;
wxSize buttonSize;
wxBitmap* pButtonBitmap;
wxBitmap* pButtonBitmapOver;
//vvv Change this compile flag when other brands are supported.
#if ((AUDACITY_BRANDING == BRAND_JAMLING__EASY) || (AUDACITY_BRANDING == BRAND_JAMLING__FULL))
//vvv Compiles only BRAND_JAMLING__EASY or BRAND_JAMLING__FULL
// because we don't load any other company_logo*_xpm consts yet.
pButtonBitmap = new wxBitmap(company_logo_xpm);
buttonImageUp = pButtonBitmap->ConvertToImage();
pButtonBitmapOver = new wxBitmap(company_logo_over_xpm);
buttonImageOver = pButtonBitmapOver->ConvertToImage();
buttonSize = wxSize(pButtonBitmap->GetWidth(), pButtonBitmap->GetHeight());
mButton_Logo =
new AButton(this, ID_BUTTON_LOGO,
wxDefaultPosition, buttonSize,
&buttonImageUp, &buttonImageOver,
&buttonImageUp, &buttonImageUp, //v other images?
true);
#else
//vvv For now, change to AudacityLogoWithName via old-fashioned ways, not Theme.
pButtonBitmap = //vvv theTheme.Bitmap(bmpAudacityLogoWithName)
new wxBitmap((const char **) AudacityLogoWithName_xpm);
buttonImageUp = pButtonBitmap->ConvertToImage();
// JKC: Resize to 50% of size. Later we may use a smaller xpm as
// our source, but this allows us to tweak the size - if we want to.
// It also makes it easier to revert to full size if we decide to.
const float fScale=0.5f;// smaller size.
buttonSize = wxSize(LOGOWITHNAME_WIDTH * fScale, LOGOWITHNAME_HEIGHT * fScale);
// wxIMAGE_QUALITY_HIGH not supported by wxWidgets 2.6.x, or we would use it here.
buttonImageUp.Rescale(buttonSize.GetWidth(), buttonSize.GetHeight());
buttonImageOver = buttonImageUp.Copy();
buttonImageOver.RotateHue(-0.01);
mButton_Logo =
new AButton(this, ID_BUTTON_LOGO,
wxDefaultPosition, buttonSize,
&buttonImageUp, &buttonImageOver,
&buttonImageUp, &buttonImageUp, //v other images?
true);
#endif
S.Prop(0).AddWindow(mButton_Logo);
mpHtml = new LinkingHtmlWindow(S.GetParent(), -1,
wxDefaultPosition,
wxSize(kWidth, 280),
wxHW_SCROLLBAR_AUTO | wxSUNKEN_BORDER );
mpHtml->SetPage(HelpText( wxT("welcome") ));
S.Prop(1).AddWindow( mpHtml, wxEXPAND );
S.Prop(0).StartMultiColumn(2, wxEXPAND);
S.SetStretchyCol( 1 );// Column 1 is stretchy...
{
S.SetBorder( 5 );
S.Id( DontShowID).AddCheckBox( _("Don't show this again at start up"), bShow ? wxT("false") : wxT("true") );
wxButton *ok = new wxButton(S.GetParent(), wxID_OK);
ok->SetDefault();
ok->SetFocus();
S.SetBorder( 5 );
S.Prop(0).AddWindow( ok, wxALIGN_RIGHT| wxALL );
}
S.EndVerticalLay();
}
/// Create the dialog contents, or exchange data with it.
void ThemePrefs::PopulateOrExchange( ShuttleGui & S)
{
S.StartHorizontalLay(wxEXPAND,1);
S.StartVerticalLay(0);
S.StartStatic( _("Theme Cache - Images && Color"));
{
S.Id( idSaveThemeCache ).AddButton( _("Save Theme Cache"));
S.Id( idLoadThemeCache ).AddButton( _("Load Theme Cache"));
// This next button is only provided in Debug mode.
// It is for developers who are compiling Audacity themselves
// and who who wish to generate a new ThemeAsCeeCode.h and compile it in.
#ifdef __WXDEBUG__
// S.Id( idSaveThemeAsCode ).AddButton( wxT("Save Code" ));
S.Id( idSaveThemeAsCode ).AddButton( wxT("Output Sourcery" ));
#endif
S.Id( idReadThemeInternal ).AddButton( _("Defaults" ));
S.TieCheckBox( _("Load Theme Cache At Startup"),
wxT("/Theme/LoadAtStart"), false);
}
S.EndStatic();
// JKC: 'Ergonomic' details:
// Theme components are used much less frequently than
// the ImageCache. Yet it's easy to click them 'by mistake'.
//
// To reduce that risk, we use a separate box to separate them off.
// And choose text on the buttons that is shorter, making the
// buttons smaller and less tempting to click.
S.StartStatic( _("Individual Theme Files"),1);
{
S.Id( idSaveThemeComponents ).AddButton( _("Save Files"));
S.Id( idLoadThemeComponents ).AddButton( _("Load Files"));
}
S.EndStatic();
S.EndVerticalLay();
S.StartStatic( _("Info"), 1 );
{
S.AddFixedText(
_("Themability is an experimental feature.\n\n"
wxT("To try it out, click \"Save Theme Cache\" then\n" )
wxT("find and modify the images and colors in \n" )
wxT("ImageCacheVxx.png using an image editor such \n" )
wxT("as the Gimp.\n\n")
wxT("Click \"Load Theme Cache\" to load the changed images\n")
wxT("and colors back into Audacity.\n\n")
wxT("[Only the control toolbar and the colors on the \n")
wxT("wavetrack are currently affected, even though the\n")
wxT("image file shows other icons too.]\n"))
);
#ifdef __WXDEBUG__
S.AddFixedText(
_("You have compiled Audacity with an extra button, \n"
wxT("'Output Sourcery'. This will save a C version of \n")
wxT("the image cache that can be compiled in as a default.\n"))
);
#endif
S.AddFixedText(
_("If 'Load Theme Cache At Startup' is checked, then \n"
wxT("the Theme Cache will be loaded when the program \n")
wxT("starts up.\n\n")
wxT("Saving and loading individual theme files uses a \n")
wxT("separate file for each image, but is otherwise the \n")
wxT("same idea.\n\n"))
);
}
S.EndStatic();
}
void EffectChangePitch::PopulateOrExchange(ShuttleGui & S)
{
DeduceFrequencies(); // Set frequency-related control values based on sample.
wxArrayString pitch;
for (int ii = 0; ii < 12; ++ii)
pitch.Add( PitchName( ii, PitchNameChoice::Both ) );
S.SetBorder(5);
S.StartVerticalLay(0);
{
S.StartVerticalLay();
{
S.AddTitle(_("Change Pitch without Changing Tempo"));
S.AddTitle(
wxString::Format(_("Estimated Start Pitch: %s%d (%.3f Hz)"),
pitch[m_nFromPitch], m_nFromOctave, m_FromFrequency));
}
S.EndVerticalLay();
/* i18n-hint: (noun) Musical pitch.*/
S.StartStatic(_("Pitch"));
{
S.StartMultiColumn(6, wxALIGN_CENTER); // 6 controls, because each AddChoice adds a wxStaticText and a wxChoice.
{
m_pChoice_FromPitch = S.Id(ID_FromPitch).AddChoice(_("from"), wxT(""), &pitch);
m_pChoice_FromPitch->SetName(_("from"));
m_pChoice_FromPitch->SetSizeHints(80, -1);
m_pSpin_FromOctave = S.Id(ID_FromOctave).AddSpinCtrl( {}, m_nFromOctave, INT_MAX, INT_MIN);
m_pSpin_FromOctave->SetName(_("from Octave"));
m_pSpin_FromOctave->SetSizeHints(50, -1);
m_pChoice_ToPitch = S.Id(ID_ToPitch).AddChoice(_("to"), wxT(""), &pitch);
m_pChoice_ToPitch->SetName(_("to"));
m_pChoice_ToPitch->SetSizeHints(80, -1);
m_pSpin_ToOctave =
S.Id(ID_ToOctave).AddSpinCtrl( {}, m_nToOctave, INT_MAX, INT_MIN);
m_pSpin_ToOctave->SetName(_("to Octave"));
m_pSpin_ToOctave->SetSizeHints(50, -1);
}
S.EndMultiColumn();
S.StartHorizontalLay(wxALIGN_CENTER);
{
FloatingPointValidator<double> vldSemitones(2, &m_dSemitonesChange, NumValidatorStyle::TWO_TRAILING_ZEROES);
m_pTextCtrl_SemitonesChange =
S.Id(ID_SemitonesChange).AddTextBox(_("Semitones (half-steps):"), wxT(""), 12);
m_pTextCtrl_SemitonesChange->SetName(_("Semitones (half-steps)"));
m_pTextCtrl_SemitonesChange->SetValidator(vldSemitones);
}
S.EndHorizontalLay();
}
S.EndStatic();
S.StartStatic(_("Frequency"));
{
S.StartMultiColumn(5, wxALIGN_CENTER); // 5, because AddTextBox adds a wxStaticText and a wxTextCtrl.
{
FloatingPointValidator<double> vldFromFrequency(3, &m_FromFrequency, NumValidatorStyle::THREE_TRAILING_ZEROES);
vldFromFrequency.SetMin(0.0);
m_pTextCtrl_FromFrequency = S.Id(ID_FromFrequency).AddTextBox(_("from"), wxT(""), 12);
m_pTextCtrl_FromFrequency->SetName(_("from (Hz)"));
m_pTextCtrl_FromFrequency->SetValidator(vldFromFrequency);
FloatingPointValidator<double> vldToFrequency(3, &m_ToFrequency, NumValidatorStyle::THREE_TRAILING_ZEROES);
vldToFrequency.SetMin(0.0);
m_pTextCtrl_ToFrequency = S.Id(ID_ToFrequency).AddTextBox(_("to"), wxT(""), 12);
m_pTextCtrl_ToFrequency->SetName(_("to (Hz)"));
m_pTextCtrl_ToFrequency->SetValidator(vldToFrequency);
S.AddUnits(_("Hz"));
}
S.EndMultiColumn();
S.StartHorizontalLay(wxALIGN_CENTER);
{
FloatingPointValidator<double> vldPercentage(3, &m_dPercentChange, NumValidatorStyle::THREE_TRAILING_ZEROES);
vldPercentage.SetRange(MIN_Percentage, MAX_Percentage);
m_pTextCtrl_PercentChange = S.Id(ID_PercentChange).AddTextBox(_("Percent Change:"), wxT(""), 12);
m_pTextCtrl_PercentChange->SetValidator(vldPercentage);
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxEXPAND);
{
S.SetStyle(wxSL_HORIZONTAL);
m_pSlider_PercentChange = S.Id(ID_PercentChange)
.AddSlider( {}, 0, (int)kSliderMax, (int)MIN_Percentage);
m_pSlider_PercentChange->SetName(_("Percent Change"));
}
S.EndHorizontalLay();
}
S.EndStatic();
#if USE_SBSMS
S.StartMultiColumn(2);
{
mUseSBSMSCheckBox = S.AddCheckBox(_("Use high quality stretching (slow)"),
mUseSBSMS? wxT("true") : wxT("false"));
mUseSBSMSCheckBox->SetValidator(wxGenericValidator(&mUseSBSMS));
}
S.EndMultiColumn();
#endif
}
S.EndVerticalLay();
return;
}
void EffectDistortion::PopulateOrExchange(ShuttleGui & S)
{
S.AddSpace(0, 5);
S.StartVerticalLay();
{
S.StartMultiColumn(4, wxCENTER);
{
mTypeChoiceCtrl = S.Id(ID_Type).AddChoice(_("Distortion type:"), wxT(""), &mTableTypes);
mTypeChoiceCtrl->SetValidator(wxGenericValidator(&mParams.mTableChoiceIndx));
S.SetSizeHints(-1, -1);
mDCBlockCheckBox = S.Id(ID_DCBlock).AddCheckBox(_("DC blocking filter"),
DEF_DCBlock ? wxT("true") : wxT("false"));
}
S.EndMultiColumn();
S.AddSpace(0, 10);
S.StartStatic(_("Threshold controls"));
{
S.StartMultiColumn(4, wxEXPAND);
S.SetStretchyCol(2);
{
// Allow space for first Column
S.AddSpace(250,0); S.AddSpace(0,0); S.AddSpace(0,0); S.AddSpace(0,0);
// Upper threshold control
mThresholdTxt = S.AddVariableText(defaultLabel[0], false, wxALIGN_CENTER_VERTICAL | wxALIGN_LEFT);
FloatingPointValidator<double> vldThreshold(2, &mParams.mThreshold_dB);
vldThreshold.SetRange(MIN_Threshold_dB, MAX_Threshold_dB);
mThresholdT = S.Id(ID_Threshold).AddTextBox(wxT(""), wxT(""), 10);
mThresholdT->SetName(defaultLabel[0]);
mThresholdT->SetValidator(vldThreshold);
S.SetStyle(wxSL_HORIZONTAL);
double maxLin = DB_TO_LINEAR(MAX_Threshold_dB) * SCL_Threshold_dB;
double minLin = DB_TO_LINEAR(MIN_Threshold_dB) * SCL_Threshold_dB;
mThresholdS = S.Id(ID_Threshold).AddSlider(wxT(""), 0, maxLin, minLin);
mThresholdS->SetName(defaultLabel[0]);
S.AddSpace(20, 0);
// Noise floor control
mNoiseFloorTxt = S.AddVariableText(defaultLabel[1], false, wxALIGN_CENTER_VERTICAL | wxALIGN_LEFT);
FloatingPointValidator<double> vldfloor(2, &mParams.mNoiseFloor);
vldfloor.SetRange(MIN_NoiseFloor, MAX_NoiseFloor);
mNoiseFloorT = S.Id(ID_NoiseFloor).AddTextBox(wxT(""), wxT(""), 10);
mNoiseFloorT->SetName(defaultLabel[1]);
mNoiseFloorT->SetValidator(vldfloor);
S.SetStyle(wxSL_HORIZONTAL);
mNoiseFloorS = S.Id(ID_NoiseFloor).AddSlider(wxT(""), 0, MAX_NoiseFloor, MIN_NoiseFloor);
mNoiseFloorS->SetName(defaultLabel[1]);
S.AddSpace(20, 0);
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Parameter controls"));
{
S.StartMultiColumn(4, wxEXPAND);
S.SetStretchyCol(2);
{
// Allow space for first Column
S.AddSpace(250,0); S.AddSpace(0,0); S.AddSpace(0,0); S.AddSpace(0,0);
// Parameter1 control
mParam1Txt = S.AddVariableText(defaultLabel[2], false, wxALIGN_CENTER_VERTICAL | wxALIGN_LEFT);
FloatingPointValidator<double> vldparam1(2, &mParams.mParam1);
vldparam1.SetRange(MIN_Param1, MAX_Param1);
mParam1T = S.Id(ID_Param1).AddTextBox(wxT(""), wxT(""), 10);
mParam1T->SetName(defaultLabel[2]);
mParam1T->SetValidator(vldparam1);
S.SetStyle(wxSL_HORIZONTAL);
mParam1S = S.Id(ID_Param1).AddSlider(wxT(""), 0, MAX_Param1, MIN_Param1);
mParam1S->SetName(defaultLabel[2]);
S.AddSpace(20, 0);
// Parameter2 control
mParam2Txt = S.AddVariableText(defaultLabel[3], false, wxALIGN_CENTER_VERTICAL | wxALIGN_LEFT);
FloatingPointValidator<double> vldParam2(2, &mParams.mParam2);
vldParam2.SetRange(MIN_Param2, MAX_Param2);
mParam2T = S.Id(ID_Param2).AddTextBox(wxT(""), wxT(""), 10);
mParam2T->SetName(defaultLabel[3]);
mParam2T->SetValidator(vldParam2);
S.SetStyle(wxSL_HORIZONTAL);
mParam2S = S.Id(ID_Param2).AddSlider(wxT(""), 0, MAX_Param2, MIN_Param2);
mParam2S->SetName(defaultLabel[3]);
S.AddSpace(20, 0);
// Repeats control
mRepeatsTxt = S.AddVariableText(defaultLabel[4], false, wxALIGN_CENTER_VERTICAL | wxALIGN_LEFT);
IntegerValidator<int>vldRepeats(&mParams.mRepeats);
vldRepeats.SetRange(MIN_Repeats, MAX_Repeats);
mRepeatsT = S.Id(ID_Repeats).AddTextBox(wxT(""), wxT(""), 10);
mRepeatsT->SetName(defaultLabel[4]);
mRepeatsT->SetValidator(vldRepeats);
S.SetStyle(wxSL_HORIZONTAL);
mRepeatsS = S.Id(ID_Repeats).AddSlider(wxT(""), DEF_Repeats, MAX_Repeats, MIN_Repeats);
mRepeatsS->SetName(defaultLabel[4]);
S.AddSpace(20, 0);
}
S.EndMultiColumn();
}
S.EndStatic();
}
S.EndVerticalLay();
return;
}
void TimerRecordDialog::PopulateOrExchange(ShuttleGui& S)
{
S.SetBorder(5);
S.StartVerticalLay(true);
{
wxString strFormat = wxT("099 h 060 m 060 s");
S.StartStatic(_("Start Date and Time"), true);
{
m_pDatePickerCtrl_Start =
new wxDatePickerCtrl(this, // wxWindow *parent,
ID_DATEPICKER_START, // wxWindowID id,
m_DateTime_Start); // const wxDateTime& dt = wxDefaultDateTime,
// const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style = wxDP_DEFAULT | wxDP_SHOWCENTURY, const wxValidator& validator = wxDefaultValidator, const wxString& name = "datectrl")
m_pDatePickerCtrl_Start->SetName(_("Start Date"));
m_pDatePickerCtrl_Start->SetRange(wxDateTime::Today(), wxInvalidDateTime); // No backdating.
S.AddWindow(m_pDatePickerCtrl_Start);
m_pTimeTextCtrl_Start = new TimeTextCtrl(this, ID_TIMETEXT_START, strFormat);
m_pTimeTextCtrl_Start->SetName(_("Start Time"));
m_pTimeTextCtrl_Start->SetTimeValue(wxDateTime_to_AudacityTime(m_DateTime_Start));
S.AddWindow(m_pTimeTextCtrl_Start);
m_pTimeTextCtrl_Start->EnableMenu(false);
}
S.EndStatic();
S.StartStatic(_("End Date and Time"), true);
{
m_pDatePickerCtrl_End =
new wxDatePickerCtrl(this, // wxWindow *parent,
ID_DATEPICKER_END, // wxWindowID id,
m_DateTime_End); // const wxDateTime& dt = wxDefaultDateTime,
// const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style = wxDP_DEFAULT | wxDP_SHOWCENTURY, const wxValidator& validator = wxDefaultValidator, const wxString& name = "datectrl")
m_pDatePickerCtrl_End->SetRange(m_DateTime_Start, wxInvalidDateTime); // No backdating.
m_pDatePickerCtrl_End->SetName(_("End Date"));
S.AddWindow(m_pDatePickerCtrl_End);
m_pTimeTextCtrl_End = new TimeTextCtrl(this, ID_TIMETEXT_END, strFormat);
m_pTimeTextCtrl_End->SetName(_("End Time"));
m_pTimeTextCtrl_End->SetTimeValue(wxDateTime_to_AudacityTime(m_DateTime_End));
S.AddWindow(m_pTimeTextCtrl_End);
m_pTimeTextCtrl_End->EnableMenu(false);
}
S.EndStatic();
S.StartStatic(_("Duration"), true);
{
wxString strFormat1 = wxT("099 days 024 h 060 m 060 s");
m_pTimeTextCtrl_Duration = new TimeTextCtrl(this, ID_TIMETEXT_DURATION, strFormat1);
m_pTimeTextCtrl_Duration->SetName(_("Duration"));
m_pTimeTextCtrl_Duration->SetTimeValue(
Internat::CompatibleToDouble(m_TimeSpan_Duration.GetSeconds().ToString())); //v milliseconds?
S.AddWindow(m_pTimeTextCtrl_Duration);
m_pTimeTextCtrl_Duration->EnableMenu(false);
}
S.EndStatic();
}
S.EndVerticalLay();
S.AddStandardButtons();
Layout();
Fit();
SetMinSize(GetSize());
Center();
}
void TimerRecordDialog::PopulateOrExchange(ShuttleGui& S)
{
S.SetBorder(5);
S.StartVerticalLay(true);
{
/* i18n-hint: This string is used to configure the controls for times when the recording is
* started and stopped. As such it is important that only the alphabetic parts of the string
* are translated, with the numbers left exactly as they are.
* The 'h' indicates the first number displayed is hours, the 'm' indicates the second number
* displayed is minutes, and the 's' indicates that the third number displayed is seconds.
*/
wxString strFormat = _("099 h 060 m 060 s");
S.StartStatic(_("Start Date and Time"), true);
{
m_pDatePickerCtrl_Start =
new wxDatePickerCtrl(this, // wxWindow *parent,
ID_DATEPICKER_START, // wxWindowID id,
m_DateTime_Start); // const wxDateTime& dt = wxDefaultDateTime,
// const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style = wxDP_DEFAULT | wxDP_SHOWCENTURY, const wxValidator& validator = wxDefaultValidator, const wxString& name = "datectrl")
m_pDatePickerCtrl_Start->SetName(_("Start Date"));
m_pDatePickerCtrl_Start->SetRange(wxDateTime::Today(), wxInvalidDateTime); // No backdating.
S.AddWindow(m_pDatePickerCtrl_Start);
m_pTimeTextCtrl_Start = new TimeTextCtrl(this, ID_TIMETEXT_START);
m_pTimeTextCtrl_Start->SetName(_("Start Time"));
m_pTimeTextCtrl_Start->SetFormatString(strFormat);
m_pTimeTextCtrl_Start->SetTimeValue(wxDateTime_to_AudacityTime(m_DateTime_Start));
S.AddWindow(m_pTimeTextCtrl_Start);
m_pTimeTextCtrl_Start->EnableMenu(false);
}
S.EndStatic();
S.StartStatic(_("End Date and Time"), true);
{
m_pDatePickerCtrl_End =
new wxDatePickerCtrl(this, // wxWindow *parent,
ID_DATEPICKER_END, // wxWindowID id,
m_DateTime_End); // const wxDateTime& dt = wxDefaultDateTime,
// const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style = wxDP_DEFAULT | wxDP_SHOWCENTURY, const wxValidator& validator = wxDefaultValidator, const wxString& name = "datectrl")
m_pDatePickerCtrl_End->SetRange(m_DateTime_Start, wxInvalidDateTime); // No backdating.
m_pDatePickerCtrl_End->SetName(_("End Date"));
S.AddWindow(m_pDatePickerCtrl_End);
m_pTimeTextCtrl_End = new TimeTextCtrl(this, ID_TIMETEXT_END);
m_pTimeTextCtrl_End->SetName(_("End Time"));
m_pTimeTextCtrl_End->SetFormatString(strFormat);
m_pTimeTextCtrl_End->SetTimeValue(wxDateTime_to_AudacityTime(m_DateTime_End));
S.AddWindow(m_pTimeTextCtrl_End);
m_pTimeTextCtrl_End->EnableMenu(false);
}
S.EndStatic();
S.StartStatic(_("Duration"), true);
{
/* i18n-hint: This string is used to configure the controls which shows the recording
* duration. As such it is important that only the alphabetic parts of the string
* are translated, with the numbers left exactly as they are.
* The string 'days' indicates that the first number in the control will be the number of days,
* then the 'h' indicates the second number displayed is hours, the 'm' indicates the third
* number displayed is minutes, and the 's' indicates that the fourth number displayed is
* seconds.
*/
wxString strFormat1 = _("099 days 024 h 060 m 060 s");
m_pTimeTextCtrl_Duration = new TimeTextCtrl(this, ID_TIMETEXT_DURATION);
m_pTimeTextCtrl_Duration->SetName(_("Duration"));
m_pTimeTextCtrl_Duration->SetFormatString(strFormat1);
m_pTimeTextCtrl_Duration->SetTimeValue(m_TimeSpan_Duration.GetSeconds().ToDouble());
S.AddWindow(m_pTimeTextCtrl_Duration);
m_pTimeTextCtrl_Duration->EnableMenu(false);
}
S.EndStatic();
}
S.EndVerticalLay();
S.AddStandardButtons();
Layout();
Fit();
SetMinSize(GetSize());
Center();
}
void EffectChangePitch::PopulateOrExchange(ShuttleGui & S)
{
DeduceFrequencies(); // Set frequency-related control values based on sample.
wxArrayString pitch;
pitch.Add(wxT("C"));
pitch.Add(wxT("C#/Db"));
pitch.Add(wxT("D"));
pitch.Add(wxT("D#/Eb"));
pitch.Add(wxT("E"));
pitch.Add(wxT("F"));
pitch.Add(wxT("F#/Gb"));
pitch.Add(wxT("G"));
pitch.Add(wxT("G#/Ab"));
pitch.Add(wxT("A"));
pitch.Add(wxT("A#/Bb"));
pitch.Add(wxT("B"));
S.SetBorder(5);
S.StartVerticalLay(0);
{
S.StartVerticalLay();
{
S.AddTitle(_("Change Pitch without Changing Tempo"));
S.AddTitle(
wxString::Format(_("Estimated Start Pitch: %s%d (%.3f Hz)"),
pitch[m_nFromPitch].c_str(), m_nFromOctave, m_FromFrequency));
}
S.EndVerticalLay();
/* i18n-hint: (noun) Musical pitch.*/
S.StartStatic(_("Pitch"));
{
S.StartMultiColumn(6, wxALIGN_CENTER); // 6 controls, because each AddChoice adds a wxStaticText and a wxChoice.
{
m_pChoice_FromPitch = S.Id(ID_FromPitch).AddChoice(_("from"), wxT(""), &pitch);
m_pChoice_FromPitch->SetName(_("from"));
m_pChoice_FromPitch->SetSizeHints(80, -1);
m_pSpin_FromOctave = S.Id(ID_FromOctave).AddSpinCtrl(wxT(""), m_nFromOctave, INT_MAX, INT_MIN);
m_pSpin_FromOctave->SetName(_("from Octave"));
m_pSpin_FromOctave->SetSizeHints(50, -1);
m_pChoice_ToPitch = S.Id(ID_ToPitch).AddChoice(_("to"), wxT(""), &pitch);
m_pChoice_ToPitch->SetName(_("to"));
m_pChoice_ToPitch->SetSizeHints(80, -1);
m_pSpin_ToOctave =
S.Id(ID_ToOctave).AddSpinCtrl(wxT(""), m_nToOctave, INT_MAX, INT_MIN);
m_pSpin_ToOctave->SetName(_("to Octave"));
m_pSpin_ToOctave->SetSizeHints(50, -1);
}
S.EndMultiColumn();
S.StartHorizontalLay(wxALIGN_CENTER);
{
FloatingPointValidator<double> vldSemitones(2, &m_dSemitonesChange, NUM_VAL_TWO_TRAILING_ZEROES);
m_pTextCtrl_SemitonesChange =
S.Id(ID_SemitonesChange).AddTextBox(_("Semitones (half-steps):"), wxT(""), 12);
m_pTextCtrl_SemitonesChange->SetName(_("Semitones (half-steps)"));
m_pTextCtrl_SemitonesChange->SetValidator(vldSemitones);
}
S.EndHorizontalLay();
}
S.EndStatic();
S.StartStatic(_("Frequency"));
{
S.StartMultiColumn(5, wxALIGN_CENTER); // 5, because AddTextBox adds a wxStaticText and a wxTextCtrl.
{
FloatingPointValidator<double> vldFromFrequency(3, &m_FromFrequency, NUM_VAL_THREE_TRAILING_ZEROES);
vldFromFrequency.SetMin(0.0);
m_pTextCtrl_FromFrequency = S.Id(ID_FromFrequency).AddTextBox(_("from"), wxT(""), 12);
m_pTextCtrl_FromFrequency->SetName(_("from (Hz)"));
m_pTextCtrl_FromFrequency->SetValidator(vldFromFrequency);
FloatingPointValidator<double> vldToFrequency(3, &m_ToFrequency, NUM_VAL_THREE_TRAILING_ZEROES);
vldToFrequency.SetMin(0.0);
m_pTextCtrl_ToFrequency = S.Id(ID_ToFrequency).AddTextBox(_("to"), wxT(""), 12);
m_pTextCtrl_ToFrequency->SetName(_("to (Hz)"));
m_pTextCtrl_ToFrequency->SetValidator(vldToFrequency);
S.AddUnits(_("Hz"));
}
S.EndMultiColumn();
S.StartHorizontalLay(wxALIGN_CENTER);
{
FloatingPointValidator<double> vldPercentage(3, &m_dPercentChange, NUM_VAL_THREE_TRAILING_ZEROES);
vldPercentage.SetRange(MIN_Percentage, MAX_Percentage);
m_pTextCtrl_PercentChange = S.Id(ID_PercentChange).AddTextBox(_("Percent Change:"), wxT(""), 12);
m_pTextCtrl_PercentChange->SetValidator(vldPercentage);
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxEXPAND);
{
S.SetStyle(wxSL_HORIZONTAL);
m_pSlider_PercentChange = S.Id(ID_PercentChange)
.AddSlider(wxT(""), 0, (int)kSliderMax, (int)MIN_Percentage);
m_pSlider_PercentChange->SetName(_("Percent Change"));
}
S.EndHorizontalLay();
}
S.EndStatic();
}
S.EndVerticalLay();
return;
}
void EffectScienFilter::PopulateOrExchange(ShuttleGui & S)
{
wxWindow *parent = S.GetParent();
S.AddSpace(5);
S.SetSizerProportion(1);
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol(1);
S.SetStretchyRow(0);
// -------------------------------------------------------------------
// ROW 1: Freq response panel and sliders for vertical scale
// -------------------------------------------------------------------
S.StartVerticalLay();
{
mdBRuler = new RulerPanel(parent, wxID_ANY);
mdBRuler->ruler.SetBounds(0, 0, 100, 100); // Ruler can't handle small sizes
mdBRuler->ruler.SetOrientation(wxVERTICAL);
mdBRuler->ruler.SetRange(30.0, -120.0);
mdBRuler->ruler.SetFormat(Ruler::LinearDBFormat);
mdBRuler->ruler.SetUnits(_("dB"));
mdBRuler->ruler.SetLabelEdges(true);
int w;
mdBRuler->ruler.GetMaxSize(&w, NULL);
mdBRuler->SetSize(wxSize(w, 150)); // height needed for wxGTK
S.SetBorder(1);
S.AddSpace(1, 1);
S.Prop(1);
S.AddWindow(mdBRuler, wxALIGN_RIGHT | wxTOP);
S.AddSpace(1, 1);
}
S.EndVerticalLay();
mPanel = new EffectScienFilterPanel(this, parent);
mPanel->SetFreqRange(mLoFreq, mNyquist);
S.SetBorder(5);
S.Prop(1);
S.AddWindow(mPanel, wxEXPAND | wxRIGHT);
S.SetSizeHints(-1, -1);
S.StartVerticalLay();
{
S.AddVariableText(_("+ dB"), false, wxCENTER);
S.SetStyle(wxSL_VERTICAL | wxSL_INVERSE);
mdBMaxSlider = S.Id(ID_dBMax).AddSlider(wxT(""), 10, 20, 0);
#if wxUSE_ACCESSIBILITY
mdBMaxSlider->SetName(_("Max dB"));
mdBMaxSlider->SetAccessible(new SliderAx(mdBMaxSlider, wxString(wxT("%d ")) + _("dB")));
#endif
S.SetStyle(wxSL_VERTICAL | wxSL_INVERSE);
mdBMinSlider = S.Id(ID_dBMin).AddSlider(wxT(""), -10, -10, -120);
S.AddVariableText(_("- dB"), false, wxCENTER);
#if wxUSE_ACCESSIBILITY
mdBMinSlider->SetName(_("Min dB"));
mdBMinSlider->SetAccessible(new SliderAx(mdBMinSlider, wxString(wxT("%d ")) + _("dB")));
#endif
}
S.EndVerticalLay();
// -------------------------------------------------------------------
// ROW 2: Frequency ruler
// -------------------------------------------------------------------
S.AddSpace(1, 1);
mfreqRuler = new RulerPanel(parent, wxID_ANY);
mfreqRuler->ruler.SetBounds(0, 0, 100, 100); // Ruler can't handle small sizes
mfreqRuler->ruler.SetOrientation(wxHORIZONTAL);
mfreqRuler->ruler.SetLog(true);
mfreqRuler->ruler.SetRange(mLoFreq, mNyquist);
mfreqRuler->ruler.SetFormat(Ruler::IntFormat);
mfreqRuler->ruler.SetUnits(wxT(""));
mfreqRuler->ruler.SetFlip(true);
mfreqRuler->ruler.SetLabelEdges(true);
int h;
mfreqRuler->ruler.GetMaxSize(NULL, &h);
mfreqRuler->SetMinSize(wxSize(-1, h));
S.Prop(1);
S.AddWindow(mfreqRuler, wxEXPAND | wxALIGN_LEFT | wxRIGHT);
S.AddSpace(1, 1);
// -------------------------------------------------------------------
// ROW 3 and 4: Type, Order, Ripple, Subtype, Cutoff
// -------------------------------------------------------------------
S.AddSpace(1, 1);
S.SetSizerProportion(0);
S.StartMultiColumn(8, wxALIGN_CENTER);
{
wxASSERT(kNumTypes == WXSIZEOF(kTypeStrings));
wxArrayString typeChoices;
for (int i = 0; i < kNumTypes; i++)
{
typeChoices.Add(wxGetTranslation(kTypeStrings[i]));
}
mFilterTypeCtl = S.Id(ID_Type).AddChoice(_("&Filter Type:"), wxT(""), &typeChoices);
mFilterTypeCtl->SetValidator(wxGenericValidator(&mFilterType));
S.SetSizeHints(-1, -1);
wxArrayString orders;
for (int i = 1; i <= 10; i++)
{
orders.Add(wxString::Format(wxT("%d"), i));
}
/*i18n-hint: 'Order' means the complexity of the filter, and is a number between 1 and 10.*/
mFilterOrderCtl = S.Id(ID_Order).AddChoice(_("O&rder:"), wxT(""), &orders);
mFilterOrderCtl->SetValidator(wxGenericValidator(&mOrderIndex));
S.SetSizeHints(-1, -1);
S.AddSpace(1, 1);
FloatingPointValidator<float> vldRipple(1, &mRipple);
vldRipple.SetRange(MIN_Passband, MAX_Passband);
mRippleCtlP = S.AddVariableText(_("&Passband Ripple:"), false, wxALL | wxALIGN_RIGHT | wxALIGN_CENTER_VERTICAL);
mRippleCtl = S.Id(ID_Ripple).AddTextBox(wxT(""), wxT(""), 10);
mRippleCtl->SetName(_("Passband Ripple (dB)"));
mRippleCtl->SetValidator(vldRipple);
mRippleCtlU = S.AddVariableText(_("dB"), false, wxALL | wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL);
wxASSERT(kNumSubTypes == WXSIZEOF(kSubTypeStrings));
wxArrayString subTypeChoices;
for (int i = 0; i < kNumSubTypes; i++)
{
subTypeChoices.Add(wxGetTranslation(kSubTypeStrings[i]));
}
mFilterSubTypeCtl = S.Id(ID_SubType).AddChoice(_("&Subtype:"), wxT(""), &subTypeChoices);
mFilterSubTypeCtl->SetValidator(wxGenericValidator(&mFilterSubtype));
S.SetSizeHints(-1, -1);
FloatingPointValidator<float> vldCutoff(1, &mCutoff);
vldCutoff.SetRange(MIN_Cutoff, mNyquist - 1);
mCutoffCtl = S.Id(ID_Cutoff).AddTextBox(_("C&utoff:"), wxT(""), 10);
mCutoffCtl->SetName(_("Cutoff (Hz)"));
mCutoffCtl->SetValidator(vldCutoff);
S.AddUnits(_("Hz"));
FloatingPointValidator<float> vldStopbandRipple(1, &mStopbandRipple);
vldStopbandRipple.SetRange(MIN_Stopband, MAX_Stopband);
mStopbandRippleCtlP = S.AddVariableText(_("Minimum S&topband Attenuation:"), false, wxALL | wxALIGN_RIGHT | wxALIGN_CENTER_VERTICAL);
mStopbandRippleCtl = S.Id(ID_StopbandRipple).AddTextBox(wxT(""), wxT(""), 10);
mStopbandRippleCtl->SetName(_("Minimum S&topband Attenuation (dB)"));
mStopbandRippleCtl->SetValidator(vldStopbandRipple);
mStopbandRippleCtlU = S.AddVariableText(_("dB"), false, wxALL | wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL);
}
S.EndMultiColumn();
S.AddSpace(1, 1);
}
S.EndMultiColumn();
mFilterTypeCtl->SetFocus();
return;
}
