示例#1
0
void ModulePrefs::PopulateOrExchange(ShuttleGui & S)
{
   wxArrayString StatusChoices;
   StatusChoices.Add( _("Disabled" ) );
   StatusChoices.Add( _("Enabled" ) );
   StatusChoices.Add( _("Ask" ) );
   StatusChoices.Add( _("Failed" ) );
   StatusChoices.Add( _("New" ) );
   S.SetBorder(2);

   S.StartStatic(wxT(""));
   {
      S.AddFixedText(_("These are experimental modules. Enable them only if you've read the Audacity Manual\nand know what you are doing.") );
      S.AddFixedText(wxString(wxT("  ")) + _("'Ask' means Audacity will ask if you want to load the module each time it starts.") );
      S.AddFixedText(wxString(wxT("  ")) + _("'Failed' means Audacity thinks the module is broken and won't run it.") );
      S.AddFixedText(wxString(wxT("  ")) + _("'New' means no choice has been made yet.") );
      S.AddFixedText(_("Changes to these settings only take effect when Audacity starts up."));
      S.StartScroller();
      {
        S.StartMultiColumn( 2 );
        int i;
        for(i=0;i<(int)mModules.GetCount();i++)
           S.TieChoice( mModules[i], mStatuses[i], &StatusChoices );
        S.EndMultiColumn();
      }
      if( mModules.GetCount() < 1 )
      {
        S.AddFixedText( _("No modules were found") );
      }
      S.EndScroller();
   }
   S.EndStatic();
}
示例#2
0
void TracksBehaviorsPrefs::PopulateOrExchange(ShuttleGui & S)
{
   S.SetBorder(2);
   S.StartScroller();

   S.StartStatic(_("Behaviors"));
   {
      S.TieCheckBox(_("A&uto-select, if selection required"),
                    wxT("/GUI/SelectAllOnNone"),
                    false);
      /* i18n-hint: Cut-lines are lines that can expand to show the cut audio.*/
      S.TieCheckBox(_("Enable cut &lines"),
                    wxT("/GUI/EnableCutLines"),
                    false);
      S.TieCheckBox(_("Enable &dragging selection edges"),
                    wxT("/GUI/AdjustSelectionEdges"),
                    true);
      S.TieCheckBox(_("Editing a clip can &move other clips"),
                    wxT("/GUI/EditClipCanMove"),
                    true);
      S.TieCheckBox(_("\"Move track focus\" c&ycles repeatedly through tracks"),
                    wxT("/GUI/CircularTrackNavigation"),
                    false);
      S.TieCheckBox(_("&Type to create a label"),
                    wxT("/GUI/TypeToCreateLabel"),
                    true);
      S.TieCheckBox(_("Use dialog for the &name of a new label"),
                    wxT("/GUI/DialogForNameNewLabel"),
                    false);
#ifdef EXPERIMENTAL_SCROLLING_LIMITS
      S.TieCheckBox(_("Enable scrolling left of &zero"),
                    ScrollingPreferenceKey(),
                    ScrollingPreferenceDefault());
#endif
      S.TieCheckBox(_("Advanced &vertical zooming"),
                    wxT("/GUI/VerticalZooming"),
                    false);

      S.AddSpace(10);

      S.StartMultiColumn(2);
      {
         S.TieChoice(_("Solo &Button:"),
                     wxT("/GUI/Solo"),
                     wxT("Standard"),
                     mSoloChoices,
                     mSoloCodes);
      }
      S.EndMultiColumn();
   }
   S.EndStatic();
   S.EndScroller();
}
示例#3
0
void ProjectsPrefs::PopulateOrExchange(ShuttleGui & S)
{
   S.SetBorder(2);
   S.StartScroller();

   S.StartStatic(_("When saving a project that depends on other audio files"));
   {
      S.StartRadioButtonGroup(wxT("/FileFormats/SaveProjectWithDependencies"), wxT("ask"));
      {
         S.TieRadioButton(_("&Copy all audio into project (safest)"),
                          wxT("copy"));
         S.TieRadioButton(_("Do &not copy any audio"),
                          wxT("never"));
         S.TieRadioButton(_("As&k"),
                          wxT("ask"));
      }
      S.EndRadioButtonGroup();
   }
   S.EndStatic();
   S.EndScroller();

}
示例#4
0
void EffectsPrefs::PopulateOrExchange(ShuttleGui & S)
{
   S.SetBorder(2);
   S.StartScroller();

   S.StartStatic(_("Enable Effects"));
   {

#if USE_AUDIO_UNITS
      S.TieCheckBox(_("Audio Unit"),
                    wxT("/AudioUnit/Enable"),
                    true);
#endif

      // JKC: LADSPA, LV2, Nyquist, VST, VAMP should not be translated.
#if USE_LADSPA
      S.TieCheckBox(wxT("&LADSPA"),
                    wxT("/Ladspa/Enable"),
                    true);
#endif

#if USE_LV2
      S.TieCheckBox(wxT("LV&2"),
                    wxT("/LV2/Enable"),
                    true);
#endif
#if USE_NYQUIST
      S.TieCheckBox(wxT("N&yquist"),
                    wxT("/Nyquist/Enable"),
                    true);
#endif

#if USE_VAMP
      S.TieCheckBox(wxT("&Vamp"),
                    wxT("/VAMP/Enable"),
                    true);
#endif

#if USE_VST
      S.TieCheckBox(wxT("V&ST"),
                    wxT("/VST/Enable"),
                    true);
#endif
   }
   S.EndStatic();

   S.StartStatic(_("Effect Options"));
   {
      S.StartMultiColumn(2);
      {
         wxArrayString visualgroups;
         wxArrayString prefsgroups;

         visualgroups.Add(_("Sorted by Effect Name"));
         visualgroups.Add(_("Sorted by Publisher and Effect Name"));
         visualgroups.Add(_("Sorted by Type and Effect Name"));
         visualgroups.Add(_("Grouped by Publisher"));
         visualgroups.Add(_("Grouped by Type"));

         prefsgroups.Add(wxT("sortby:name"));
         prefsgroups.Add(wxT("sortby:publisher:name"));
         prefsgroups.Add(wxT("sortby:type:name"));
         prefsgroups.Add(wxT("groupby:publisher"));
         prefsgroups.Add(wxT("groupby:type"));

         wxChoice *c = S.TieChoice(_("S&ort or Group:"),
                                   wxT("/Effects/GroupBy"),
                                   wxT("name"),
                                   visualgroups,
                                   prefsgroups);
         c->SetMinSize(c->GetBestSize());

         S.TieNumericTextBox(_("&Maximum effects per group (0 to disable):"),
                             wxT("/Effects/MaxPerGroup"),
#if defined(__WXGTK__)
                             15,
#else
                             0,
#endif
                             5);
      }
      S.EndMultiColumn();
   }
   S.EndStatic();

#ifndef EXPERIMENTAL_EFFECT_MANAGEMENT
   S.StartStatic(_("Plugin Options"));
   {
      S.TieCheckBox(_("Check for updated plugins when Audacity starts"),
                     wxT("/Plugins/CheckForUpdates"),
                     true);
      S.TieCheckBox(_("Rescan plugins next time Audacity is started"),
                     wxT("/Plugins/Rescan"),
                     false);
   }
   S.EndStatic();
#endif

#ifdef EXPERIMENTAL_EQ_SSE_THREADED
   S.StartStatic(_("Instruction Set"));
   {
      S.TieCheckBox(_("&Use SSE/SSE2/.../AVX"),
                    wxT("/SSE/GUI"),
                    true);
   }
   S.EndStatic();
#endif
   S.EndScroller();
}
示例#5
0
void GUIPrefs::PopulateOrExchange(ShuttleGui & S)
{
   S.SetBorder(2);
   S.StartScroller();

   S.StartStatic(_("Display"));
   {
      S.StartMultiColumn(2);
      {

#ifdef EXPERIMENTAL_DA
         const wxString defaultTheme = wxT("dark");
#else
         const wxString defaultTheme = wxT("light");
#endif
         const wxString defaultRange = wxString::Format(wxT("%d"), ENV_DB_RANGE);

         S.TieChoice(_("&Language:"),
                     wxT("/Locale/Language"),
                     wxT(""),
                     mLangNames,
                     mLangCodes);
         S.SetSizeHints(mLangNames);

         S.TieChoice(_("Location of &Manual:"),
                     wxT("/GUI/Help"),
                     wxT("Local"),
                     mHtmlHelpChoices,
                     mHtmlHelpCodes);
         S.SetSizeHints(mHtmlHelpChoices);

         S.TieChoice(_("Th&eme:"),
                     wxT("/GUI/Theme"),
                     defaultTheme,
                     mThemeChoices,
                     mThemeCodes);
         S.SetSizeHints(mThemeChoices);

         S.TieChoice(_("Meter dB &range:"),
                     ENV_DB_KEY,
                     defaultRange,
                     mRangeChoices,
                     mRangeCodes);
         S.SetSizeHints(mRangeChoices);
      }
      S.EndMultiColumn();
//      S.AddSpace(10);
// JKC: This is a silly preference.  Kept here as a reminder that we may
// later want to have configurable button order.
//      S.TieCheckBox(_("&Ergonomic order of Transport Toolbar buttons"),
//                    wxT("/GUI/ErgonomicTransportButtons"),
//                    true);

   }
   S.EndStatic();

   S.StartStatic(_("Show"));
   {
      S.TieCheckBox(_("'How to Get &Help' at launch"),
                    wxT("/GUI/ShowSplashScreen"),
                    true);
      S.TieCheckBox(_("E&xtra menus"),
                    wxT("/GUI/ShowExtraMenus"),
                    false);
#ifdef EXPERIMENTAL_THEME_PREFS
      // We do not want to make this option mainstream.  It's a 
      // convenience for developers.
      S.TieCheckBox(_("Show alternative &styling (Mac vs PC)"),
                    wxT("/GUI/ShowMac"),
                    false);
#endif
   }
   S.EndStatic();

   S.StartStatic(_("Behaviors"));
   {
      S.TieCheckBox(_("&Beep on completion of longer activities"),
                    wxT("/GUI/BeepOnCompletion"),
                    false);
      S.TieCheckBox(_("Re&tain labels if selection snaps to a label"),
                    wxT("/GUI/RetainLabels"),
                    false);
      S.TieCheckBox(_("B&lend system and Audacity theme"),
                    wxT("/GUI/BlendThemes"),
                    true);
   }
   S.EndStatic();
   S.EndScroller();
}
示例#6
0
/// This PopulateOrExchange function is a good example of mixing the fully
/// automatic style of reading/writing from GUI to prefs with the partial form.
///
/// You'll notice that some of the Tie functions have Prefs identifiers in them
/// and others don't.
void LibraryPrefs::PopulateOrExchange(ShuttleGui & S)
{
   S.SetBorder(2);
   S.StartScroller();

   S.StartStatic(_("MP3 Export Library"));
   {
      S.StartTwoColumn();
      {
         S.AddVariableText(_("MP3 Library Version:"),
                           true,
                           wxALL | wxALIGN_RIGHT | wxALIGN_CENTRE_VERTICAL);
         mMP3Version = S.AddVariableText(wxT("9.99"),
                                         true,
                                         wxALL | wxALIGN_LEFT | wxALIGN_CENTRE_VERTICAL);
         S.AddVariableText(_("MP3 Library:"),
                           true,
                           wxALL | wxALIGN_RIGHT | wxALIGN_CENTRE_VERTICAL);
         wxButton *locate_button = S.Id(ID_MP3_FIND_BUTTON).AddButton(_("&Locate..."),
                                            wxALL | wxALIGN_LEFT | wxALIGN_CENTRE_VERTICAL);
         S.AddVariableText(_("LAME MP3 Library:"),
                           true,
                           wxALL | wxALIGN_RIGHT | wxALIGN_CENTRE_VERTICAL);
         wxButton *download_button = S.Id(ID_MP3_DOWN_BUTTON).AddButton(_("&Download"),
                                            wxALL | wxALIGN_LEFT | wxALIGN_CENTRE_VERTICAL);
#ifdef DISABLE_DYNAMIC_LOADING_LAME
         locate_button->Enable(FALSE);
         download_button->Enable(FALSE);
#else
        (void)locate_button;
        (void)download_button;
#endif // DISABLE_DYNAMIC_LOADING_LAME
      }
      S.EndTwoColumn();
   }
   S.EndStatic();

   S.StartStatic(_("FFmpeg Import/Export Library"));
   {
      S.StartTwoColumn();
      {
         S.AddVariableText(_("FFmpeg Library Version:"),
                           true,
                           wxALL | wxALIGN_RIGHT | wxALIGN_CENTRE_VERTICAL);
#if defined(USE_FFMPEG)
         mFFmpegVersion = S.AddVariableText(_("No compatible FFmpeg library was found"),
                                            true,
                                            wxALL | wxALIGN_LEFT | wxALIGN_CENTRE_VERTICAL);
#else
         mFFmpegVersion = S.AddVariableText(wxT("FFmpeg support is not compiled in"),
                                            true,
                                            wxALL | wxALIGN_LEFT | wxALIGN_CENTRE_VERTICAL);
#endif
         S.AddVariableText(_("FFmpeg Library:"),
                           true,
                           wxALL | wxALIGN_RIGHT | wxALIGN_CENTRE_VERTICAL);
         S.Id(ID_FFMPEG_FIND_BUTTON);
         wxButton *bfnd = S.AddButton(_("Loca&te..."),
                                      wxALL | wxALIGN_LEFT | wxALIGN_CENTRE_VERTICAL);
         S.AddVariableText(_("FFmpeg Library:"),
                           true,
                           wxALL | wxALIGN_RIGHT | wxALIGN_CENTRE_VERTICAL);
         S.Id(ID_FFMPEG_DOWN_BUTTON);
         wxButton *bdwn = S.AddButton(_("Dow&nload"),
                                      wxALL | wxALIGN_LEFT | wxALIGN_CENTRE_VERTICAL);
#if !defined(USE_FFMPEG) || defined(DISABLE_DYNAMIC_LOADING_FFMPEG)
         bdwn->Enable(FALSE);
         bfnd->Enable(FALSE);
#else
         // fix compilation warnings about unused variables
         wxUnusedVar(bfnd);
         wxUnusedVar(bdwn);
#endif
      }
      S.EndTwoColumn();
#ifdef EXPERIMENTAL_OD_FFMPEG
      wxCheckBox* checkbox = S.TieCheckBox(_("Allow &background on-demand loading"),
                    wxT("/Library/FFmpegOnDemand"),
                    false);
#if !defined(USE_FFMPEG)
      checkbox->Enable(FALSE);
#endif
#endif
   }
   S.EndStatic();
   S.EndScroller();

}
示例#7
0
void VampEffect::PopulateOrExchange(ShuttleGui & S)
{
   Vamp::Plugin::ProgramList programs = mPlugin->getPrograms();

   mParameters = mPlugin->getParameterDescriptors();

   auto count = mParameters.size();

   mToggles.reinit( count );
   mSliders.reinit( count );
   mFields.reinit( count );
   mLabels.reinit( count );
   mChoices.reinit( count );
   mValues.reinit( count );

   S.SetStyle(wxVSCROLL | wxTAB_TRAVERSAL);
   wxScrolledWindow *scroller = S.StartScroller(2);
   {
      S.StartStatic(_("Plugin Settings"));
      {
         S.StartMultiColumn(5, wxEXPAND);
         {
            S.SetStretchyCol(3);

            if (!programs.empty())
            {
               wxString currentProgram =  wxString::FromUTF8(mPlugin->getCurrentProgram().c_str());

               wxArrayStringEx choices;
               for (size_t i = 0, cnt = programs.size(); i < cnt; i++)
               {
                  choices.push_back(wxString::FromUTF8(programs[i].c_str()));
               }

               S.AddPrompt(_("Program"));

               S.Id(ID_Program);
               mProgram = S.AddChoice(
                  {},
                  choices,
                  choices.Index( currentProgram )
               );
               mProgram->SetName(_("Program"));
               mProgram->SetSizeHints(-1, -1);
               wxSizer *s = mProgram->GetContainingSizer();
               s->GetItem(mProgram)->SetFlag(wxEXPAND | wxALIGN_CENTER_VERTICAL | wxALL);

               S.AddSpace(1, 1);
               S.AddSpace(1, 1);
               S.AddSpace(1, 1);
            }

            for (size_t p = 0; p < count; p++)
            {
               wxString tip = wxString::FromUTF8(mParameters[p].description.c_str());
               wxString unit = wxString::FromUTF8(mParameters[p].unit.c_str());

               float value = mPlugin->getParameter(mParameters[p].identifier);

               mToggles[p] = NULL;
               mChoices[p] = NULL;
               mSliders[p] = NULL;
               mFields[p] = NULL;
               mValues[p] = 0.0;

               wxString labelText = wxString::FromUTF8(mParameters[p].name.c_str());
               if (!unit.empty())
               {
                  labelText += wxT(" (") + unit + wxT(")");
               }
               S.AddPrompt(labelText + wxT(":"));

               if (mParameters[p].isQuantized &&
                   mParameters[p].quantizeStep == 1.0 &&
                   mParameters[p].minValue == 0.0 &&
                   mParameters[p].maxValue == 1.0)
               {
                  S.Id(ID_Toggles + p);
                  mToggles[p] = S.AddCheckBox( {},
                                              value > 0.5);
                  mToggles[p]->SetName(labelText);
                  if (!tip.empty())
                  {
                     mToggles[p]->SetToolTip(tip);
                  }
                  wxSizer *s = mToggles[p]->GetContainingSizer();
                  s->GetItem(mToggles[p])->SetFlag(wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL | wxALL);

                  S.AddSpace(1, 1);
                  S.AddSpace(1, 1);
                  S.AddSpace(1, 1);

               }
               else if (mParameters[p].isQuantized &&
                        mParameters[p].quantizeStep == 1.0 &&
                        !mParameters[p].valueNames.empty())
               {
                  wxArrayStringEx choices;
                  int selected = -1;

                  for (size_t i = 0, cnt = mParameters[p].valueNames.size(); i < cnt; i++)
                  {
                     wxString choice = wxString::FromUTF8(mParameters[p].valueNames[i].c_str());
                     if (size_t(value - mParameters[p].minValue + 0.5) == i)
                     {
                        selected = i;
                     }
                     choices.push_back(choice);
                  }

                  S.Id(ID_Choices + p);
                  mChoices[p] = S.AddChoice( {}, choices, selected );
                  mChoices[p]->SetName(labelText);
                  mChoices[p]->SetSizeHints(-1, -1);
                  if (!tip.empty())
                  {
                     mChoices[p]->SetToolTip(tip);
                  }
                  wxSizer *s = mChoices[p]->GetContainingSizer();
                  s->GetItem(mChoices[p])->SetFlag(wxEXPAND | wxALIGN_CENTER_VERTICAL | wxALL);

                  S.AddSpace(1, 1);
                  S.AddSpace(1, 1);
                  S.AddSpace(1, 1);
               }
               else
               {
                  mValues[p] = value;
                  FloatingPointValidator<float> vld(6, &mValues[p]);
                  vld.SetRange(mParameters[p].minValue, mParameters[p].maxValue);

                  float range = mParameters[p].maxValue - mParameters[p].minValue;
                  auto style = range < 10 ? NumValidatorStyle::THREE_TRAILING_ZEROES :
                              range < 100 ? NumValidatorStyle::TWO_TRAILING_ZEROES :
                              NumValidatorStyle::ONE_TRAILING_ZERO;
                  vld.SetStyle(style);

                  S.Id(ID_Texts + p);
                  mFields[p] = S.AddTextBox( {}, wxT(""), 12);
                  mFields[p]->SetName(labelText);
                  mFields[p]->SetValidator(vld);
                  if (!tip.empty())
                  {
                     mFields[p]->SetToolTip(tip);
                  }
                  wxSizer *s = mFields[p]->GetContainingSizer();
                  s->GetItem(mFields[p])->SetFlag(wxALIGN_CENTER_VERTICAL | wxALL);

                  wxString str = Internat::ToDisplayString(mParameters[p].minValue);
                  S.AddPrompt(str);

                  S.SetStyle(wxSL_HORIZONTAL);
                  S.Id(ID_Sliders + p);
                  mSliders[p] = S.AddSlider( {}, 0, 1000, 0);
                  mSliders[p]->SetName(labelText);
                  mSliders[p]->SetSizeHints(150, -1);
                  if (!tip.empty())
                  {
                     mSliders[p]->SetToolTip(tip);
                  }
                  
                  str = Internat::ToDisplayString(mParameters[p].maxValue);
                  S.AddUnits(str);
               }
            }
         }
         S.EndMultiColumn();
      }
      S.EndStatic();
   }
   S.EndScroller();

   scroller->SetScrollRate(0, 20);

   return;
}
示例#8
0
void MidiIOPrefs::PopulateOrExchange( ShuttleGui & S ) {
   wxArrayString empty;

   S.SetBorder(2);
   S.StartScroller();

   S.StartStatic(_("Interface"));
   {
      S.StartMultiColumn(2);
      {
         S.Id(HostID);
         /* i18n-hint: (noun) */
         mHost = S.TieChoice(_("&Host:"),
                             wxT("/MidiIO/Host"),
                             wxT(""),
                             mHostNames,
                             mHostLabels);
         S.SetSizeHints(mHostNames);

         S.AddPrompt(_("Using: PortMidi"));
      }
      S.EndMultiColumn();
   }
   S.EndStatic();

   S.StartStatic(_("Playback"));
   {
      S.StartMultiColumn(2);
      {
         S.Id(PlayID);
         mPlay = S.AddChoice(_("&Device:"),
                             wxEmptyString,
                             &empty);
         int latency = gPrefs->Read(wxT("/MidiIO/OutputLatency"),
                                    DEFAULT_SYNTH_LATENCY);
         mLatency = S.TieNumericTextBox(_("MIDI Synth L&atency (ms):"),
                                        wxT("/MidiIO/SynthLatency"),
                                        latency, 3);
      }
      S.EndMultiColumn();
   }
   S.EndStatic();
#ifdef EXPERIMENTAL_MIDI_IN
   S.StartStatic(_("Recording"));
   {
      S.StartMultiColumn(2);
      {
         S.Id(RecordID);
         mRecord = S.AddChoice(_("De&vice:"),
                               wxEmptyString,
                               &empty);

         S.Id(ChannelsID);
         /*
         mChannels = S.AddChoice(_("&Channels:"),
                                 wxEmptyString,
                                 &empty);
         */
      }
      S.EndMultiColumn();
   }
   S.EndStatic();
#endif
   S.EndScroller();

}