void SpectrumPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("FFT Window"));
{
S.StartMultiColumn(2);
{
S.TieChoice(_("Window size") + wxString(wxT(":")),
wxT("/Spectrum/FFTSize"),
256,
mSizeChoices,
mSizeCodes);
S.SetSizeHints(mSizeChoices);
S.TieChoice(_("Window type") + wxString(wxT(":")),
wxT("/Spectrum/WindowType"),
3,
mTypeChoices,
mTypeCodes);
S.SetSizeHints(mTypeChoices);
}
S.EndMultiColumn();
}
S.EndStatic();
#ifdef EXPERIMENTAL_FFT_SKIP_POINTS
wxArrayString wskipn;
wxArrayInt wskipv;
for (size_t i = 0; i < 7; i++) {
wskipn.Add(wxString::Format(wxT("%d"), (1 << i) - 1));
wskipv.Add((1 << i) - 1);
}
S.StartStatic(_("FFT Skip Points"));
{
S.StartMultiColumn(2);
{
S.TieChoice(_("Skip Points") + wxString(wxT(":")),
wxT("/Spectrum/FFTSkipPoints"),
0,
wskipn,
wskipv);
S.SetSizeHints(wskipn);
}
S.EndMultiColumn();
}
S.EndStatic();
#endif //EXPERIMENTAL_FFT_SKIP_POINTS
S.StartStatic(_("Display"));
{
S.StartTwoColumn();
{
mMinFreq =
S.TieTextBox(_("Minimum Frequency (Hz):"),
wxT("/Spectrum/MinFreq"),
0,
12);
mMaxFreq =
S.TieTextBox(_("Maximum Frequency (Hz):"),
wxT("/Spectrum/MaxFreq"),
8000,
12);
mGain =
S.TieTextBox(_("Gain (dB):"),
wxT("/Spectrum/Gain"),
20,
8);
mRange =
S.TieTextBox(_("Range (dB):"),
wxT("/Spectrum/Range"),
80,
8);
mFrequencyGain =
S.TieTextBox(_("Frequency gain: (dB/dec)"),
wxT("/Spectrum/FrequencyGain"),
0,
4);
}
S.EndTwoColumn();
S.TieCheckBox(_("Show the spectrum using &grayscale colors"),
wxT("/Spectrum/Grayscale"),
false);
#ifdef EXPERIMENTAL_FFT_Y_GRID
S.TieCheckBox(_("Show a grid along the &Y-axis"),
wxT("/Spectrum/FFTYGrid"),
false);
#endif //EXPERIMENTAL_FFT_Y_GRID
}
S.EndStatic();
#ifdef EXPERIMENTAL_FIND_NOTES
S.StartStatic(_("FFT Find Notes"));
{
S.StartTwoColumn();
{
mFindNotesMinA =
S.TieTextBox(_("Minimum Amplitude (dB):"),
wxT("/Spectrum/FindNotesMinA"),
-30L,
8);
mFindNotesN =
S.TieTextBox(_("Max. Number of Notes (1..128):"),
wxT("/Spectrum/FindNotesN"),
5L,
8);
}
S.EndTwoColumn();
S.TieCheckBox(_("&Find Notes"),
wxT("/Spectrum/FFTFindNotes"),
false);
S.TieCheckBox(_("&Quantize Notes"),
wxT("/Spectrum/FindNotesQuantize"),
false);
}
S.EndStatic();
#endif //EXPERIMENTAL_FIND_NOTES
}
void EffectWahwah::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(5);
S.AddSpace(0, 5);
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol(2);
FloatingPointValidator<double> vldfreq(5, &mFreq, NumValidatorStyle::ONE_TRAILING_ZERO);
vldfreq.SetRange(MIN_Freq, MAX_Freq);
mFreqT = S.Id(ID_Freq).AddTextBox(_("LFO Freq&uency (Hz):"), wxT(""), 12);
mFreqT->SetValidator(vldfreq);
S.SetStyle(wxSL_HORIZONTAL);
mFreqS = S.Id(ID_Freq).AddSlider( {}, DEF_Freq * SCL_Freq, MAX_Freq * SCL_Freq, MIN_Freq * SCL_Freq);
mFreqS->SetName(_("LFO frequency in hertz"));
mFreqS->SetMinSize(wxSize(100, -1));
FloatingPointValidator<double> vldphase(1, &mPhase);
vldphase.SetRange(MIN_Phase, MAX_Phase);
mPhaseT = S.Id(ID_Phase).AddTextBox(_("LFO Sta&rt Phase (deg.):"), wxT(""), 12);
mPhaseT->SetValidator(vldphase);
S.SetStyle(wxSL_HORIZONTAL);
mPhaseS = S.Id(ID_Phase).AddSlider( {}, DEF_Phase * SCL_Phase, MAX_Phase * SCL_Phase, MIN_Phase * SCL_Phase);
mPhaseS->SetName(_("LFO start phase in degrees"));
mPhaseS->SetLineSize(10);
mPhaseS->SetMinSize(wxSize(100, -1));
IntegerValidator<int> vlddepth(&mDepth);
vlddepth.SetRange(MIN_Depth, MAX_Depth);
mDepthT = S.Id(ID_Depth).AddTextBox(_("Dept&h (%):"), wxT(""), 12);
mDepthT->SetValidator(vlddepth);
S.SetStyle(wxSL_HORIZONTAL);
mDepthS = S.Id(ID_Depth).AddSlider( {}, DEF_Depth * SCL_Depth, MAX_Depth * SCL_Depth, MIN_Depth * SCL_Depth);
mDepthS->SetName(_("Depth in percent"));
mDepthS->SetMinSize(wxSize(100, -1));
FloatingPointValidator<double> vldres(1, &mRes);
vldres.SetRange(MIN_Res, MAX_Res);
mResT = S.Id(ID_Res).AddTextBox(_("Reso&nance:"), wxT(""), 12);
mResT->SetValidator(vldres);
S.SetStyle(wxSL_HORIZONTAL);
mResS = S.Id(ID_Res).AddSlider( {}, DEF_Res * SCL_Res, MAX_Res * SCL_Res, MIN_Res * SCL_Res);
mResS->SetName(_("Resonance"));
mResS->SetMinSize(wxSize(100, -1));
IntegerValidator<int> vldfreqoffset(&mFreqOfs);
vldfreqoffset.SetRange(MIN_FreqOfs, MAX_FreqOfs);
mFreqOfsT = S.Id(ID_FreqOfs).AddTextBox(_("Wah Frequency Offse&t (%):"), wxT(""), 12);
mFreqOfsT->SetValidator(vldfreqoffset);
S.SetStyle(wxSL_HORIZONTAL);
mFreqOfsS = S.Id(ID_FreqOfs).AddSlider( {}, DEF_FreqOfs * SCL_FreqOfs, MAX_FreqOfs * SCL_FreqOfs, MIN_FreqOfs * SCL_FreqOfs);
mFreqOfsT->SetName(_("Wah frequency offset in percent"));
mFreqOfsT->SetMinSize(wxSize(100, -1));
FloatingPointValidator<double> vldoutgain(1, &mOutGain);
vldoutgain.SetRange(MIN_OutGain, MAX_OutGain);
mOutGainT = S.Id(ID_OutGain).AddTextBox(_("&Output gain (dB):"), wxT(""), 12);
mOutGainT->SetValidator(vldoutgain);
S.SetStyle(wxSL_HORIZONTAL);
mOutGainS = S.Id(ID_OutGain).AddSlider( {}, DEF_OutGain * SCL_OutGain, MAX_OutGain * SCL_OutGain, MIN_OutGain * SCL_OutGain);
mOutGainS->SetName(_("Output gain (dB)"));
mOutGainS->SetMinSize(wxSize(100, -1));
}
S.EndMultiColumn();
}
void EffectsPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartScroller();
S.StartStatic(_("Enable Effects"));
{
#if USE_AUDIO_UNITS
S.TieCheckBox(_("Audio Unit"),
wxT("/AudioUnit/Enable"),
true);
#endif
// JKC: LADSPA, LV2, Nyquist, VST, VAMP should not be translated.
#if USE_LADSPA
S.TieCheckBox(wxT("&LADSPA"),
wxT("/Ladspa/Enable"),
true);
#endif
#if USE_LV2
S.TieCheckBox(wxT("LV&2"),
wxT("/LV2/Enable"),
true);
#endif
#if USE_NYQUIST
S.TieCheckBox(wxT("N&yquist"),
wxT("/Nyquist/Enable"),
true);
#endif
#if USE_VAMP
S.TieCheckBox(wxT("&Vamp"),
wxT("/VAMP/Enable"),
true);
#endif
#if USE_VST
S.TieCheckBox(wxT("V&ST"),
wxT("/VST/Enable"),
true);
#endif
}
S.EndStatic();
S.StartStatic(_("Effect Options"));
{
S.StartMultiColumn(2);
{
wxArrayString visualgroups;
wxArrayString prefsgroups;
visualgroups.Add(_("Sorted by Effect Name"));
visualgroups.Add(_("Sorted by Publisher and Effect Name"));
visualgroups.Add(_("Sorted by Type and Effect Name"));
visualgroups.Add(_("Grouped by Publisher"));
visualgroups.Add(_("Grouped by Type"));
prefsgroups.Add(wxT("sortby:name"));
prefsgroups.Add(wxT("sortby:publisher:name"));
prefsgroups.Add(wxT("sortby:type:name"));
prefsgroups.Add(wxT("groupby:publisher"));
prefsgroups.Add(wxT("groupby:type"));
wxChoice *c = S.TieChoice(_("S&ort or Group:"),
wxT("/Effects/GroupBy"),
wxT("name"),
visualgroups,
prefsgroups);
c->SetMinSize(c->GetBestSize());
S.TieNumericTextBox(_("&Maximum effects per group (0 to disable):"),
wxT("/Effects/MaxPerGroup"),
#if defined(__WXGTK__)
15,
#else
0,
#endif
5);
}
S.EndMultiColumn();
}
S.EndStatic();
#ifndef EXPERIMENTAL_EFFECT_MANAGEMENT
S.StartStatic(_("Plugin Options"));
{
S.TieCheckBox(_("Check for updated plugins when Audacity starts"),
wxT("/Plugins/CheckForUpdates"),
true);
S.TieCheckBox(_("Rescan plugins next time Audacity is started"),
wxT("/Plugins/Rescan"),
false);
}
S.EndStatic();
#endif
#ifdef EXPERIMENTAL_EQ_SSE_THREADED
S.StartStatic(_("Instruction Set"));
{
S.TieCheckBox(_("&Use SSE/SSE2/.../AVX"),
wxT("/SSE/GUI"),
true);
}
S.EndStatic();
#endif
S.EndScroller();
}
void TimerRecordDialog::PopulateOrExchange(ShuttleGui& S)
{
S.SetBorder(5);
S.StartVerticalLay(true);
{
/* i18n-hint: This string is used to configure the controls for times when the recording is
* started and stopped. As such it is important that only the alphabetic parts of the string
* are translated, with the numbers left exactly as they are.
* The 'h' indicates the first number displayed is hours, the 'm' indicates the second number
* displayed is minutes, and the 's' indicates that the third number displayed is seconds.
*/
wxString strFormat = _("099 h 060 m 060 s");
S.StartStatic(_("Start Date and Time"), true);
{
m_pDatePickerCtrl_Start =
new wxDatePickerCtrl(this, // wxWindow *parent,
ID_DATEPICKER_START, // wxWindowID id,
m_DateTime_Start); // const wxDateTime& dt = wxDefaultDateTime,
// const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style = wxDP_DEFAULT | wxDP_SHOWCENTURY, const wxValidator& validator = wxDefaultValidator, const wxString& name = "datectrl")
m_pDatePickerCtrl_Start->SetName(_("Start Date"));
m_pDatePickerCtrl_Start->SetRange(wxDateTime::Today(), wxInvalidDateTime); // No backdating.
S.AddWindow(m_pDatePickerCtrl_Start);
m_pTimeTextCtrl_Start = new TimeTextCtrl(this, ID_TIMETEXT_START);
m_pTimeTextCtrl_Start->SetName(_("Start Time"));
m_pTimeTextCtrl_Start->SetFormatString(strFormat);
m_pTimeTextCtrl_Start->SetTimeValue(wxDateTime_to_AudacityTime(m_DateTime_Start));
S.AddWindow(m_pTimeTextCtrl_Start);
m_pTimeTextCtrl_Start->EnableMenu(false);
}
S.EndStatic();
S.StartStatic(_("End Date and Time"), true);
{
m_pDatePickerCtrl_End =
new wxDatePickerCtrl(this, // wxWindow *parent,
ID_DATEPICKER_END, // wxWindowID id,
m_DateTime_End); // const wxDateTime& dt = wxDefaultDateTime,
// const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style = wxDP_DEFAULT | wxDP_SHOWCENTURY, const wxValidator& validator = wxDefaultValidator, const wxString& name = "datectrl")
m_pDatePickerCtrl_End->SetRange(m_DateTime_Start, wxInvalidDateTime); // No backdating.
m_pDatePickerCtrl_End->SetName(_("End Date"));
S.AddWindow(m_pDatePickerCtrl_End);
m_pTimeTextCtrl_End = new TimeTextCtrl(this, ID_TIMETEXT_END);
m_pTimeTextCtrl_End->SetName(_("End Time"));
m_pTimeTextCtrl_End->SetFormatString(strFormat);
m_pTimeTextCtrl_End->SetTimeValue(wxDateTime_to_AudacityTime(m_DateTime_End));
S.AddWindow(m_pTimeTextCtrl_End);
m_pTimeTextCtrl_End->EnableMenu(false);
}
S.EndStatic();
S.StartStatic(_("Duration"), true);
{
/* i18n-hint: This string is used to configure the controls which shows the recording
* duration. As such it is important that only the alphabetic parts of the string
* are translated, with the numbers left exactly as they are.
* The string 'days' indicates that the first number in the control will be the number of days,
* then the 'h' indicates the second number displayed is hours, the 'm' indicates the third
* number displayed is minutes, and the 's' indicates that the fourth number displayed is
* seconds.
*/
wxString strFormat1 = _("099 days 024 h 060 m 060 s");
m_pTimeTextCtrl_Duration = new TimeTextCtrl(this, ID_TIMETEXT_DURATION);
m_pTimeTextCtrl_Duration->SetName(_("Duration"));
m_pTimeTextCtrl_Duration->SetFormatString(strFormat1);
m_pTimeTextCtrl_Duration->SetTimeValue(m_TimeSpan_Duration.GetSeconds().ToDouble());
S.AddWindow(m_pTimeTextCtrl_Duration);
m_pTimeTextCtrl_Duration->EnableMenu(false);
}
S.EndStatic();
}
S.EndVerticalLay();
S.AddStandardButtons();
Layout();
Fit();
SetMinSize(GetSize());
Center();
}
void EffectAutoDuck::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(5);
S.StartVerticalLay(true);
{
S.AddSpace(0, 5);
mPanel = safenew EffectAutoDuckPanel(S.GetParent(), this);
S.AddWindow(mPanel);
S.AddSpace(0, 5);
S.StartMultiColumn(6, wxCENTER);
{
FloatingPointValidator<double> vldDuckAmountDb(1, &mDuckAmountDb, NUM_VAL_NO_TRAILING_ZEROES);
vldDuckAmountDb.SetRange(MIN_DuckAmountDb, MAX_DuckAmountDb);
mDuckAmountDbBox = S.AddTextBox(_("Duck amount:"), wxT(""), 10);
mDuckAmountDbBox->SetValidator(vldDuckAmountDb);
S.AddUnits(_("dB"));
FloatingPointValidator<double> vldMaximumPause(2, &mMaximumPause, NUM_VAL_NO_TRAILING_ZEROES);
vldMaximumPause.SetRange(MIN_MaximumPause, MAX_MaximumPause);
mMaximumPauseBox = S.AddTextBox(_("Maximum pause:"), wxT(""), 10);
mMaximumPauseBox->SetValidator(vldMaximumPause);
S.AddUnits(_("seconds"));
FloatingPointValidator<double> vldOuterFadeDownLen(2, &mOuterFadeDownLen, NUM_VAL_NO_TRAILING_ZEROES);
vldOuterFadeDownLen.SetRange(MIN_OuterFadeDownLen, MAX_OuterFadeDownLen);
mOuterFadeDownLenBox = S.AddTextBox(_("Outer fade down length:"), wxT(""), 10);
mOuterFadeDownLenBox->SetValidator(vldOuterFadeDownLen);
S.AddUnits(_("seconds"));
FloatingPointValidator<double> vldOuterFadeUpLen(2, &mOuterFadeUpLen, NUM_VAL_NO_TRAILING_ZEROES);
vldOuterFadeUpLen.SetRange(MIN_OuterFadeUpLen, MAX_OuterFadeUpLen);
mOuterFadeUpLenBox = S.AddTextBox(_("Outer fade up length:"), wxT(""), 10);
mOuterFadeUpLenBox->SetValidator(vldOuterFadeUpLen);
S.AddUnits(_("seconds"));
FloatingPointValidator<double> vldInnerFadeDownLen(2, &mInnerFadeDownLen, NUM_VAL_NO_TRAILING_ZEROES);
vldInnerFadeDownLen.SetRange(MIN_InnerFadeDownLen, MAX_InnerFadeDownLen);
mInnerFadeDownLenBox = S.AddTextBox(_("Inner fade down length:"), wxT(""), 10);
mInnerFadeDownLenBox->SetValidator(vldInnerFadeDownLen);
S.AddUnits(_("seconds"));
FloatingPointValidator<double> vldInnerFadeUpLen(2, &mInnerFadeUpLen, NUM_VAL_NO_TRAILING_ZEROES);
vldInnerFadeUpLen.SetRange(MIN_InnerFadeUpLen, MAX_InnerFadeUpLen);
mInnerFadeUpLenBox = S.AddTextBox(_("Inner fade up length:"), wxT(""), 10);
mInnerFadeUpLenBox->SetValidator(vldInnerFadeUpLen);
S.AddUnits(_("seconds"));
}
S.EndMultiColumn();
S.StartMultiColumn(3, wxCENTER);
{
FloatingPointValidator<double> vldThresholdDb(2, &mThresholdDb, NUM_VAL_NO_TRAILING_ZEROES);
vldThresholdDb.SetRange(MIN_ThresholdDb, MAX_ThresholdDb);
mThresholdDbBox = S.AddTextBox(_("Threshold:"), wxT(""), 10);
mThresholdDbBox->SetValidator(vldThresholdDb);
S.AddUnits(_("dB"));
}
S.EndMultiColumn();
}
S.EndVerticalLay();
return;
}
void SpectrumPrefs::PopulateOrExchange(ShuttleGui & S)
{
mPopulating = true;
S.SetBorder(2);
// S.StartStatic(_("Track Settings"));
// {
mDefaultsCheckbox = 0;
if (mWt) {
/* i18n-hint: use is a verb */
mDefaultsCheckbox = S.Id(ID_DEFAULTS).TieCheckBox(_("Use Preferences"), mDefaulted);
}
S.StartStatic(_("Scale"));
{
S.StartTwoColumn();
{
S.Id(ID_SCALE).TieChoice(_("S&cale") + wxString(wxT(":")),
*(int*)&mTempSettings.scaleType,
&mScaleChoices);
mMinFreq =
S.Id(ID_MINIMUM).TieNumericTextBox(_("Mi&nimum Frequency (Hz):"),
mTempSettings.minFreq,
12);
mMaxFreq =
S.Id(ID_MAXIMUM).TieNumericTextBox(_("Ma&ximum Frequency (Hz):"),
mTempSettings.maxFreq,
12);
}
S.EndTwoColumn();
}
S.EndStatic();
S.StartStatic(_("Colors"));
{
S.StartTwoColumn();
{
mGain =
S.Id(ID_GAIN).TieNumericTextBox(_("&Gain (dB):"),
mTempSettings.gain,
8);
mRange =
S.Id(ID_RANGE).TieNumericTextBox(_("&Range (dB):"),
mTempSettings.range,
8);
mFrequencyGain =
S.Id(ID_FREQUENCY_GAIN).TieNumericTextBox(_("Frequency g&ain (dB/dec):"),
mTempSettings.frequencyGain,
4);
}
S.Id(ID_GRAYSCALE).TieCheckBox(_("S&how the spectrum using grayscale colors"),
mTempSettings.isGrayscale);
S.EndTwoColumn();
}
S.EndStatic();
S.StartStatic(_("Algorithm"));
{
S.StartMultiColumn(2);
{
mAlgorithmChoice =
S.Id(ID_ALGORITHM).TieChoice(_("A&lgorithm") + wxString(wxT(":")),
*(int*)&mTempSettings.algorithm,
&mAlgorithmChoices);
S.Id(ID_WINDOW_SIZE).TieChoice(_("Window &size:"),
mTempSettings.windowSize,
&mSizeChoices);
S.SetSizeHints(mSizeChoices);
S.Id(ID_WINDOW_TYPE).TieChoice(_("Window &type:"),
mTempSettings.windowType,
&mTypeChoices);
S.SetSizeHints(mTypeChoices);
#ifdef EXPERIMENTAL_ZERO_PADDED_SPECTROGRAMS
mZeroPaddingChoiceCtrl =
S.Id(ID_PADDING_SIZE).TieChoice(_("&Zero padding factor") + wxString(wxT(":")),
mTempSettings.zeroPaddingFactor,
&mZeroPaddingChoices);
S.SetSizeHints(mZeroPaddingChoices);
#endif
}
S.EndMultiColumn();
}
S.EndStatic();
#ifndef SPECTRAL_SELECTION_GLOBAL_SWITCH
S.Id(ID_SPECTRAL_SELECTION).TieCheckBox(_("Ena&ble Spectral Selection"),
mTempSettings.spectralSelection);
#endif
#ifdef EXPERIMENTAL_FFT_Y_GRID
S.TieCheckBox(_("Show a grid along the &Y-axis"),
mTempSettings.fftYGrid);
#endif //EXPERIMENTAL_FFT_Y_GRID
#ifdef EXPERIMENTAL_FIND_NOTES
/* i18n-hint: FFT stands for Fast Fourier Transform and probably shouldn't be translated*/
S.StartStatic(_("FFT Find Notes"));
{
S.StartTwoColumn();
{
mFindNotesMinA =
S.TieNumericTextBox(_("Minimum Amplitude (dB):"),
mTempSettings.fftFindNotes,
8);
mFindNotesN =
S.TieNumericTextBox(_("Max. Number of Notes (1..128):"),
mTempSettings.findNotesMinA,
8);
}
S.EndTwoColumn();
S.TieCheckBox(_("&Find Notes"),
mTempSettings.numberOfMaxima);
S.TieCheckBox(_("&Quantize Notes"),
mTempSettings.findNotesQuantize);
}
S.EndStatic();
#endif //EXPERIMENTAL_FIND_NOTES
// S.EndStatic();
#ifdef SPECTRAL_SELECTION_GLOBAL_SWITCH
S.StartStatic(_("Global settings"));
{
S.TieCheckBox(_("Ena&ble spectral selection"),
SpectrogramSettings::Globals::Get().spectralSelection);
}
S.EndStatic();
#endif
EnableDisableSTFTOnlyControls();
mPopulating = false;
}
void PhaserDialog::PopulateOrExchange(ShuttleGui & S)
{
wxTextValidator vld(wxFILTER_NUMERIC);
S.SetBorder(5);
S.StartMultiColumn(3, wxEXPAND);
{
wxSlider *s;
wxTextCtrl * tempTC;
S.SetStretchyCol(1);
tempTC = S.Id(ID_PHASER_STAGESTEXT).AddTextBox(_("Stages:"), wxT(""), 12);
S.SetStyle(wxSL_HORIZONTAL);
tempTC->SetValidator(vld);
s = S.Id(ID_PHASER_STAGESSLIDER).AddSlider(wxT(""), 2, STAGES_MAX, STAGES_MIN);
s->SetName(_("Stages"));
#if defined(__WXGTK__)
s->SetMinSize(wxSize(100, -1));
#endif
tempTC = S.Id(ID_PHASER_DRYWETTEXT).AddTextBox(_("Dry/Wet:"), wxT(""), 12);
S.SetStyle(wxSL_HORIZONTAL);
tempTC->SetValidator(vld);
s = S.Id(ID_PHASER_DRYWETSLIDER).AddSlider(wxT(""), 0, DRYWET_MAX, DRYWET_MIN);
s->SetName(_("Dry Wet"));
#if defined(__WXGTK__)
s->SetMinSize(wxSize(100, -1));
#endif
tempTC = S.Id(ID_PHASER_FREQTEXT).AddTextBox(_("LFO Frequency (Hz):"), wxT(""), 12);
S.SetStyle(wxSL_HORIZONTAL);
tempTC->SetValidator(vld);
s = S.Id(ID_PHASER_FREQSLIDER).AddSlider(wxT(""), 100, FREQ_MAX, FREQ_MIN);
s->SetName(_("LFO frequency in hertz"));
#if defined(__WXGTK__)
s->SetMinSize(wxSize(100, -1));
#endif
tempTC = S.Id(ID_PHASER_PHASETEXT).AddTextBox(_("LFO Start Phase (deg.):"), wxT(""), 12);
S.SetStyle(wxSL_HORIZONTAL);
tempTC->SetValidator(vld);
s = S.Id(ID_PHASER_PHASESLIDER).AddSlider(wxT(""), 0, PHASE_MAX, PHASE_MIN);
s->SetName(_("LFO start phase in degrees"));
s->SetLineSize(10);
#if defined(__WXGTK__)
s->SetMinSize(wxSize(100, -1));
#endif
tempTC = S.Id(ID_PHASER_DEPTHTEXT).AddTextBox(_("Depth:"), wxT(""), 12);
S.SetStyle(wxSL_HORIZONTAL);
tempTC->SetValidator(vld);
s = S.Id(ID_PHASER_DEPTHSLIDER).AddSlider(wxT(""), 0, DEPTH_MAX, DEPTH_MIN);
s->SetName(_("Depth in percent"));
#if defined(__WXGTK__)
s->SetMinSize(wxSize(100, -1));
#endif
tempTC = S.Id(ID_PHASER_FEEDBACKTEXT).AddTextBox(_("Feedback (%):"), wxT(""), 12);
S.SetStyle(wxSL_HORIZONTAL);
tempTC->SetValidator(vld);
s = S.Id(ID_PHASER_FEEDBACKSLIDER).AddSlider(wxT(""), 0, FB_MAX, FB_MIN);
s->SetName(_("Feedback in percent"));
s->SetLineSize(10);
#if defined(__WXGTK__)
s->SetMinSize(wxSize(100, -1));
#endif
}
S.EndMultiColumn();
}
void EffectScienFilter::PopulateOrExchange(ShuttleGui & S)
{
wxWindow *parent = S.GetParent();
S.AddSpace(5);
S.SetSizerProportion(1);
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol(1);
S.SetStretchyRow(0);
// -------------------------------------------------------------------
// ROW 1: Freq response panel and sliders for vertical scale
// -------------------------------------------------------------------
S.StartVerticalLay();
{
mdBRuler = new RulerPanel(parent, wxID_ANY);
mdBRuler->ruler.SetBounds(0, 0, 100, 100); // Ruler can't handle small sizes
mdBRuler->ruler.SetOrientation(wxVERTICAL);
mdBRuler->ruler.SetRange(30.0, -120.0);
mdBRuler->ruler.SetFormat(Ruler::LinearDBFormat);
mdBRuler->ruler.SetUnits(_("dB"));
mdBRuler->ruler.SetLabelEdges(true);
int w;
mdBRuler->ruler.GetMaxSize(&w, NULL);
mdBRuler->SetSize(wxSize(w, 150)); // height needed for wxGTK
S.SetBorder(1);
S.AddSpace(1, 1);
S.Prop(1);
S.AddWindow(mdBRuler, wxALIGN_RIGHT | wxTOP);
S.AddSpace(1, 1);
}
S.EndVerticalLay();
mPanel = new EffectScienFilterPanel(this, parent);
mPanel->SetFreqRange(mLoFreq, mNyquist);
S.SetBorder(5);
S.Prop(1);
S.AddWindow(mPanel, wxEXPAND | wxRIGHT);
S.SetSizeHints(-1, -1);
S.StartVerticalLay();
{
S.AddVariableText(_("+ dB"), false, wxCENTER);
S.SetStyle(wxSL_VERTICAL | wxSL_INVERSE);
mdBMaxSlider = S.Id(ID_dBMax).AddSlider(wxT(""), 10, 20, 0);
#if wxUSE_ACCESSIBILITY
mdBMaxSlider->SetName(_("Max dB"));
mdBMaxSlider->SetAccessible(new SliderAx(mdBMaxSlider, wxString(wxT("%d ")) + _("dB")));
#endif
S.SetStyle(wxSL_VERTICAL | wxSL_INVERSE);
mdBMinSlider = S.Id(ID_dBMin).AddSlider(wxT(""), -10, -10, -120);
S.AddVariableText(_("- dB"), false, wxCENTER);
#if wxUSE_ACCESSIBILITY
mdBMinSlider->SetName(_("Min dB"));
mdBMinSlider->SetAccessible(new SliderAx(mdBMinSlider, wxString(wxT("%d ")) + _("dB")));
#endif
}
S.EndVerticalLay();
// -------------------------------------------------------------------
// ROW 2: Frequency ruler
// -------------------------------------------------------------------
S.AddSpace(1, 1);
mfreqRuler = new RulerPanel(parent, wxID_ANY);
mfreqRuler->ruler.SetBounds(0, 0, 100, 100); // Ruler can't handle small sizes
mfreqRuler->ruler.SetOrientation(wxHORIZONTAL);
mfreqRuler->ruler.SetLog(true);
mfreqRuler->ruler.SetRange(mLoFreq, mNyquist);
mfreqRuler->ruler.SetFormat(Ruler::IntFormat);
mfreqRuler->ruler.SetUnits(wxT(""));
mfreqRuler->ruler.SetFlip(true);
mfreqRuler->ruler.SetLabelEdges(true);
int h;
mfreqRuler->ruler.GetMaxSize(NULL, &h);
mfreqRuler->SetMinSize(wxSize(-1, h));
S.Prop(1);
S.AddWindow(mfreqRuler, wxEXPAND | wxALIGN_LEFT | wxRIGHT);
S.AddSpace(1, 1);
// -------------------------------------------------------------------
// ROW 3 and 4: Type, Order, Ripple, Subtype, Cutoff
// -------------------------------------------------------------------
S.AddSpace(1, 1);
S.SetSizerProportion(0);
S.StartMultiColumn(8, wxALIGN_CENTER);
{
wxASSERT(kNumTypes == WXSIZEOF(kTypeStrings));
wxArrayString typeChoices;
for (int i = 0; i < kNumTypes; i++)
{
typeChoices.Add(wxGetTranslation(kTypeStrings[i]));
}
mFilterTypeCtl = S.Id(ID_Type).AddChoice(_("&Filter Type:"), wxT(""), &typeChoices);
mFilterTypeCtl->SetValidator(wxGenericValidator(&mFilterType));
S.SetSizeHints(-1, -1);
wxArrayString orders;
for (int i = 1; i <= 10; i++)
{
orders.Add(wxString::Format(wxT("%d"), i));
}
/*i18n-hint: 'Order' means the complexity of the filter, and is a number between 1 and 10.*/
mFilterOrderCtl = S.Id(ID_Order).AddChoice(_("O&rder:"), wxT(""), &orders);
mFilterOrderCtl->SetValidator(wxGenericValidator(&mOrderIndex));
S.SetSizeHints(-1, -1);
S.AddSpace(1, 1);
FloatingPointValidator<float> vldRipple(1, &mRipple);
vldRipple.SetRange(MIN_Passband, MAX_Passband);
mRippleCtlP = S.AddVariableText(_("&Passband Ripple:"), false, wxALL | wxALIGN_RIGHT | wxALIGN_CENTER_VERTICAL);
mRippleCtl = S.Id(ID_Ripple).AddTextBox(wxT(""), wxT(""), 10);
mRippleCtl->SetName(_("Passband Ripple (dB)"));
mRippleCtl->SetValidator(vldRipple);
mRippleCtlU = S.AddVariableText(_("dB"), false, wxALL | wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL);
wxASSERT(kNumSubTypes == WXSIZEOF(kSubTypeStrings));
wxArrayString subTypeChoices;
for (int i = 0; i < kNumSubTypes; i++)
{
subTypeChoices.Add(wxGetTranslation(kSubTypeStrings[i]));
}
mFilterSubTypeCtl = S.Id(ID_SubType).AddChoice(_("&Subtype:"), wxT(""), &subTypeChoices);
mFilterSubTypeCtl->SetValidator(wxGenericValidator(&mFilterSubtype));
S.SetSizeHints(-1, -1);
FloatingPointValidator<float> vldCutoff(1, &mCutoff);
vldCutoff.SetRange(MIN_Cutoff, mNyquist - 1);
mCutoffCtl = S.Id(ID_Cutoff).AddTextBox(_("C&utoff:"), wxT(""), 10);
mCutoffCtl->SetName(_("Cutoff (Hz)"));
mCutoffCtl->SetValidator(vldCutoff);
S.AddUnits(_("Hz"));
FloatingPointValidator<float> vldStopbandRipple(1, &mStopbandRipple);
vldStopbandRipple.SetRange(MIN_Stopband, MAX_Stopband);
mStopbandRippleCtlP = S.AddVariableText(_("Minimum S&topband Attenuation:"), false, wxALL | wxALIGN_RIGHT | wxALIGN_CENTER_VERTICAL);
mStopbandRippleCtl = S.Id(ID_StopbandRipple).AddTextBox(wxT(""), wxT(""), 10);
mStopbandRippleCtl->SetName(_("Minimum S&topband Attenuation (dB)"));
mStopbandRippleCtl->SetValidator(vldStopbandRipple);
mStopbandRippleCtlU = S.AddVariableText(_("dB"), false, wxALL | wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL);
}
S.EndMultiColumn();
S.AddSpace(1, 1);
}
S.EndMultiColumn();
mFilterTypeCtl->SetFocus();
return;
}
void EffectChangeSpeed::PopulateOrExchange(ShuttleGui & S)
{
GetPrivateConfig(GetCurrentSettingsGroup(), wxT("TimeFormat"), mFormat, mFormat);
GetPrivateConfig(GetCurrentSettingsGroup(), wxT("VinylChoice"), mFromVinyl, mFromVinyl);
S.SetBorder(5);
S.StartVerticalLay(0);
{
S.AddSpace(0, 5);
S.AddTitle(_("Change Speed, affecting both Tempo and Pitch"));
S.AddSpace(0, 10);
// Speed multiplier and percent change controls.
S.StartMultiColumn(4, wxCENTER);
{
FloatingPointValidator<double> vldMultiplier(3, &mMultiplier, NUM_VAL_THREE_TRAILING_ZEROES);
vldMultiplier.SetRange(MIN_Percentage / 100.0, ((MAX_Percentage / 100.0) + 1));
mpTextCtrl_Multiplier =
S.Id(ID_Multiplier).AddTextBox(_("Speed Multiplier:"), wxT(""), 12);
mpTextCtrl_Multiplier->SetValidator(vldMultiplier);
FloatingPointValidator<double> vldPercentage(3, &m_PercentChange, NUM_VAL_THREE_TRAILING_ZEROES);
vldPercentage.SetRange(MIN_Percentage, MAX_Percentage);
mpTextCtrl_PercentChange =
S.Id(ID_PercentChange).AddTextBox(_("Percent Change:"), wxT(""), 12);
mpTextCtrl_PercentChange->SetValidator(vldPercentage);
}
S.EndMultiColumn();
// Percent change slider.
S.StartHorizontalLay(wxEXPAND);
{
S.SetStyle(wxSL_HORIZONTAL);
mpSlider_PercentChange =
S.Id(ID_PercentChange).AddSlider(wxT(""), 0, (int)kSliderMax, (int)MIN_Percentage);
mpSlider_PercentChange->SetName(_("Percent Change"));
}
S.EndHorizontalLay();
// Vinyl rpm controls.
S.StartMultiColumn(5, wxCENTER);
{
/* i18n-hint: "rpm" is an English abbreviation meaning "revolutions per minute". */
S.AddUnits(_("Standard Vinyl rpm:"));
wxASSERT(kNumVinyl == WXSIZEOF(kVinylStrings));
wxArrayString vinylChoices;
for (int i = 0; i < kNumVinyl; i++)
{
if (i == kVinyl_NA)
{
vinylChoices.Add(wxGetTranslation(kVinylStrings[i]));
}
else
{
vinylChoices.Add(kVinylStrings[i]);
}
}
mpChoice_FromVinyl =
S.Id(ID_FromVinyl).AddChoice(_("from"), wxT(""), &vinylChoices);
mpChoice_FromVinyl->SetName(_("From rpm"));
mpChoice_FromVinyl->SetSizeHints(100, -1);
mpChoice_ToVinyl =
S.Id(ID_ToVinyl).AddChoice(_("to"), wxT(""), &vinylChoices);
mpChoice_ToVinyl->SetName(_("To rpm"));
mpChoice_ToVinyl->SetSizeHints(100, -1);
}
S.EndMultiColumn();
// From/To time controls.
S.StartStatic(_("Selection Length"), 0);
{
S.StartMultiColumn(2, wxALIGN_LEFT);
{
S.AddPrompt(_("Current Length:"));
mpFromLengthCtrl = safenew
NumericTextCtrl(NumericConverter::TIME,
S.GetParent(),
wxID_ANY,
mFormat,
mFromLength,
mProjectRate);
mpFromLengthCtrl->SetName(_("from"));
mpFromLengthCtrl->SetToolTip(_("Current length of selection."));
mpFromLengthCtrl->SetReadOnly(true);
mpFromLengthCtrl->EnableMenu(false);
S.AddWindow(mpFromLengthCtrl, wxALIGN_LEFT);
S.AddPrompt(_("New Length:"));
mpToLengthCtrl = safenew
NumericTextCtrl(NumericConverter::TIME,
S.GetParent(),
ID_ToLength,
mFormat,
mToLength,
mProjectRate);
mpToLengthCtrl->SetName(_("to"));
mpToLengthCtrl->EnableMenu();
S.AddWindow(mpToLengthCtrl, wxALIGN_LEFT);
}
S.EndMultiColumn();
}
S.EndStatic();
}
S.EndVerticalLay();
}
/// Create the dialog contents, or exchange data with it.
void ThemePrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("Info"));
{
S.AddFixedText(
_("Themability is an experimental feature.\n\nTo try it out, click \"Save Theme Cache\" then find and modify the images and colors in\nImageCacheVxx.png using an image editor such as the Gimp.\n\nClick \"Load Theme Cache\" to load the changed images and colors back into Audacity.\n\n(Only the Transport Toolbar and the colors on the wavetrack are currently affected, even\nthough the image file shows other icons too.)")
);
#ifdef __WXDEBUG__
S.AddFixedText(
_("You have compiled Audacity with an extra button, 'Output Sourcery'. This will save a\nC version of the image cache that can be compiled in as a default.")
);
#endif
S.AddFixedText(
_("If 'Load Theme Cache At Startup' is checked, then the Theme Cache will be loaded\nwhen the program starts up.")
);
S.AddFixedText(
_("Saving and loading individual theme files uses a separate file for each image, but is\notherwise the same idea.")
);
}
S.EndStatic();
/* i18n-hint: && in here is an escape character to get a single & on screen,
* so keep it as is */
S.StartStatic( _("Theme Cache - Images && Color"));
{
S.StartHorizontalLay(wxALIGN_LEFT);
{
S.Id(idSaveThemeCache).AddButton(_("Save Theme Cache"));
S.Id(idLoadThemeCache).AddButton(_("Load Theme Cache"));
// This next button is only provided in Debug mode.
// It is for developers who are compiling Audacity themselves
// and who who wish to generate a new ThemeAsCeeCode.h and compile it in.
#ifdef __WXDEBUG__
S.Id(idSaveThemeAsCode).AddButton(wxT("Output Sourcery"));
#endif
S.Id(idReadThemeInternal).AddButton(_("&Defaults"));
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxALIGN_LEFT);
{
S.TieCheckBox(_("Load Theme Cache At Startup"),
wxT("/Theme/LoadAtStart"),
false);
}
S.EndHorizontalLay();
}
S.EndStatic();
// JKC: 'Ergonomic' details:
// Theme components are used much less frequently than
// the ImageCache. Yet it's easy to click them 'by mistake'.
//
// To reduce that risk, we use a separate box to separate them off.
// And choose text on the buttons that is shorter, making the
// buttons smaller and less tempting to click.
S.StartStatic( _("Individual Theme Files"),1);
{
S.StartHorizontalLay(wxALIGN_LEFT);
{
S.Id(idSaveThemeComponents).AddButton( _("Save Files"));
S.Id(idLoadThemeComponents).AddButton( _("Load Files"));
}
S.EndHorizontalLay();
}
S.EndStatic();
}
void EffectsPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("Enable Effects"));
{
#if USE_AUDIO_UNITS
S.TieCheckBox(_("Audio Unit"),
wxT("/AudioUnits/Enable"),
true);
#endif
// JKC: LADSPA, LV2, Nyquist, VST, VAMP should not be translated.
#if USE_LADSPA
S.TieCheckBox(wxT("&LADSPA"),
wxT("/Ladspa/Enable"),
true);
#endif
#if USE_LV2
S.TieCheckBox(wxT("LV&2"),
wxT("/LV2/Enable"),
true);
#endif
#if USE_NYQUIST
S.TieCheckBox(wxT("N&yquist"),
wxT("/Nyquist/Enable"),
true);
#endif
#if USE_VAMP
S.TieCheckBox(wxT("&VAMP"),
wxT("/VAMP/Enable"),
true);
#endif
#if USE_VST
S.TieCheckBox(wxT("V&ST"),
wxT("/VST/Enable"),
true);
#endif
S.AddFixedText(_("Restart Audacity to apply changes."));
}
S.EndStatic();
#if USE_AUDIO_UNITS
S.StartStatic(_("Audio Unit Effects"));
{
S.TieCheckBox(_("Display Audio Unit effects in Graphical Mode"),
wxT("/AudioUnits/GUI"),
true);
#if 0
S.TieCheckBox(_("Rescan VST effects next time Audacity is started"),
wxT("/VST/Rescan"),
false);
#endif
}
S.EndStatic();
#endif
#if USE_VST
S.StartStatic(_("VST Effects"));
{
S.TieCheckBox(_("&Display VST effects in Graphical Mode"),
wxT("/VST/GUI"),
true);
S.TieCheckBox(_("&Rescan VST effects next time Audacity is started"),
wxT("/VST/Rescan"),
false);
}
S.EndStatic();
#endif
#ifdef EXPERIMENTAL_EQ_SSE_THREADED
S.StartStatic(_("Instruction Set"));
{
S.TieCheckBox(_("&Use SSE/SSE2/.../AVX"),
wxT("/SSE/GUI"),
true);
}
S.EndStatic();
#endif
}
void ExportMultiple::PopulateOrExchange(ShuttleGui& S)
{
S.SetBorder(5);
S.StartMultiColumn(4, true);
{
wxArrayString formats;
for (size_t i = 0; i < mPlugins.GetCount(); i++) {
formats.Add(mPlugins[i]->GetDescription());
}
S.AddPrompt(_("Export format:"));
mFormat = S.Id(FormatID)
.TieChoice(wxT(""),
wxT("/Export/MultipleFormat"),
gPrefs->Read(wxT("/Export/Format"), wxT("WAV")),
formats,
formats);
S.Id(OptionsID).AddButton(_("Options..."));
S.AddVariableText(wxT(""), false);
S.AddPrompt(_("Export location:"));
mDir = S.Id(DirID)
.TieTextBox(wxT(""),
wxT("/Export/MultiplePath"),
gPrefs->Read(wxT("/Export/Path"), ::wxGetCwd()),
64);
S.Id(ChooseID).AddButton(_("Choose..."));
S.Id(CreateID).AddButton(_("Create"));
}
S.EndMultiColumn();
S.StartHorizontalLay(wxEXPAND, true);
{
S.SetBorder(5);
S.StartStatic(_("Split files based on:"), true);
{
S.StartMultiColumn(2, false);
S.SetStretchyCol(1);
{
// Row 1
S.SetBorder(1);
mLabel = S.Id(LabelID)
.AddRadioButton(wxT(""));
S.SetBorder(3);
mLabelLabel = S.AddVariableText(_("Labels"), false);
// Row 2
S.AddVariableText(wxT(""), false);
mFirst = S.Id(FirstID)
.AddCheckBox(_("Include audio before first label"), wxT("false"));
// Row 3
S.AddVariableText(wxT(""), false);
S.StartHorizontalLay(wxEXPAND, false);
{
mFirstFileLabel = S.AddVariableText(_("First file name:"), true);
mFirstFileName = S.Id(FirstFileNameID)
.TieTextBox(wxT(""),
wxT("/Export/MultipleFirstName"),
wxT(""),
30);
}
S.EndHorizontalLay();
// Row 4
S.SetBorder(1);
mTrack = S.Id(TrackID)
.AddRadioButtonToGroup(wxT(""));
S.SetBorder(3);
mTrackLabel = S.AddVariableText(_("Tracks"), false);
}
S.EndMultiColumn();
}
S.EndStatic();
S.SetBorder(5);
S.StartStatic(_("Name files:"), false);
{
S.StartMultiColumn(2, false);
S.SetStretchyCol(1);
{
// Row 1
S.SetBorder(1);
mByName = S.Id(ByNameID)
.AddRadioButton(wxT(""));
S.SetBorder(3);
mByNameLabel = S.AddVariableText(_("Using Label/Track Name"), false);
// Row 2
S.SetBorder(1);
mByNumber = S.Id(ByNumberID)
.AddRadioButtonToGroup(wxT(""));
S.SetBorder(3);
mByNumberLabel = S.AddVariableText(_("Numbering consecutively"), false);
// Row 3
S.AddVariableText(wxT(""), false);
S.StartHorizontalLay(wxEXPAND, false);
{
mPrefixLabel = S.AddVariableText(_("File name prefix:"), true);
mPrefix = S.Id(PrefixID)
.TieTextBox(wxT(""),
wxT("/Export/MultiplePrefix"),
wxT(""),
30);
}
S.EndHorizontalLay();
}
S.EndMultiColumn();
}
S.EndStatic();
}
S.EndHorizontalLay();
S.SetBorder(5);
S.StartHorizontalLay(wxEXPAND, false);
{
mOverwrite = S.Id(OverwriteID)
.AddCheckBox(_("Overwrite existing files"), wxT("true"));
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxALIGN_CENTER, false);
{
#if defined(__WXGTK20__) || defined(__WXMAC__)
S.Id(wxID_CANCEL).AddButton(_("&Cancel"));
mExport = S.Id(wxID_OK).AddButton(_("E&xport"));
#else
mExport = S.Id(wxID_OK).AddButton(_("E&xport"));
S.Id(wxID_CANCEL).AddButton(_("&Cancel"));
#endif
mExport->SetDefault();
}
S.EndHorizontalLay();
}
void AudioIOPrefs::PopulateOrExchange( ShuttleGui & S )
{
/// \todo
/// JKC: I think setting paths in gPrefs is bad practice.
/// Suppose we are using gPrefs from elsewhere at the same time?
/// Change these all to full paths?
gPrefs->SetPath(wxT("/AudioIO"));
S.SetBorder( 2 );
S.StartHorizontalLay(wxEXPAND, 0 );
S.StartStatic( _("Playback"),1 );
{
S.StartMultiColumn(2, wxEXPAND);
S.SetStretchyCol(1);
S.TieChoice( _("Device") + wxString(wxT(":")), wxT("PlaybackDevice"),
wxT(""), mmPlayNames, mmPlayLabels );
S.AddPrompt( _("Using:") );
wxString ver = _("Portaudio v");
#if USE_PORTAUDIO_V19
ver += wxT("19");
#else
ver += wxT("18");
#endif
S.AddFixedText( ver );
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic( _("Recording"), 1 );
{
S.StartMultiColumn(2, wxEXPAND);
S.SetStretchyCol(1);
S.TieChoice( _("Device") + wxString(wxT(":")), wxT("RecordingDevice"),
wxT(""), mmRecordNames, mmRecordLabels );
S.TieChoice( _("Channels") + wxString(wxT(":")), wxT("RecordChannels"),
2, mmChannelNames, mmChannelLabels );
S.EndMultiColumn();
}
S.EndStatic();
S.EndHorizontalLay();
S.StartStatic( _("Playthrough") );
{
S.TieCheckBox( _("&Play other tracks while recording new one"),
wxT("Duplex"),true);
#ifdef __MACOSX__
S.TieCheckBox( _("&Hardware Playthrough (Play new track while recording it)"),
wxT("Playthrough"),false);
#endif
S.TieCheckBox( _("&Software Playthrough (Play new track while recording it)"),
wxT("SWPlaythrough"),false);
}
S.EndStatic();
S.StartHorizontalLay( wxEXPAND, 0 );
S.StartStatic( _("Cut Preview"),1 );
{
S.StartThreeColumn();
S.TieTextBox( _("Play before cut region:"), wxT("CutPreviewBeforeLen"),1.0,9);
S.AddUnits( _("seconds") );
S.TieTextBox( _("Play after cut region:"),wxT("CutPreviewAfterLen"), 1.0,9);
S.AddUnits( _("seconds") );
S.EndThreeColumn();
}
S.EndStatic();
S.StartStatic( _("Latency"),1 );
{
S.StartThreeColumn();
#if USE_PORTAUDIO_V19
// only show the following controls if we use Portaudio v19, because
// for Portaudio v19 we always use default buffer sizes
S.TieTextBox( _("Audio to buffer:"),wxT("LatencyDuration"),100.0,9);
S.AddUnits( _("milliseconds") );
#endif
S.TieTextBox( _("Latency correction:"),wxT("LatencyCorrection"),0.0,9);
S.AddUnits( _("milliseconds") );
S.EndThreeColumn();
}
S.EndStatic();
S.EndHorizontalLay();
S.StartHorizontalLay( wxEXPAND, 0 );
S.StartStatic( _("Seek Time"),1 );
{
S.StartThreeColumn();
S.TieTextBox( _("Short period:"), wxT("SeekShortPeriod"),1.0,9);
S.AddUnits( _("seconds") );
S.TieTextBox( _("Long period:"),wxT("SeekLongPeriod"), 15.0,9);
S.AddUnits( _("seconds") );
S.EndThreeColumn();
}
S.EndStatic();
S.StartStatic( _("Effects Preview"),1 );
{
S.StartThreeColumn();
S.TieTextBox( _("Play when previewing:"), wxT("EffectsPreviewLen"), 3.0,9);
S.AddUnits( _("seconds") );
S.EndThreeColumn();
}
gPrefs->SetPath(wxT("/"));
}
void QualityPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("Sampling"));
{
S.StartMultiColumn(2);
{
S.AddPrompt(_("Default Sample &Rate:"));
S.StartMultiColumn(2);
{
// If the value in Prefs isn't in the list, then we want
// the last item, 'Other...' to be shown.
S.SetNoMatchSelector(mSampleRateNames.GetCount() - 1);
// First the choice...
// We make sure it uses the ID we want, so that we get changes
S.Id(ID_SAMPLE_RATE_CHOICE);
// We make sure we have a pointer to it, so that we can drive it.
mSampleRates = S.TieChoice(wxT(""),
wxT("/SamplingRate/DefaultProjectSampleRate"),
AudioIO::GetOptimalSupportedSampleRate(),
mSampleRateNames,
mSampleRateLabels);
S.SetSizeHints(mSampleRateNames);
// Now do the edit box...
mOtherSampleRate = S.TieNumericTextBox(wxT(""),
mOtherSampleRateValue,
15);
}
S.EndHorizontalLay();
S.TieChoice(_("Default Sample &Format:"),
wxT("/SamplingRate/DefaultProjectSampleFormat"),
floatSample,
mSampleFormatNames,
mSampleFormatLabels);
S.SetSizeHints(mSampleFormatNames);
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Real-time Conversion"));
{
S.StartMultiColumn(2, wxEXPAND);
{
S.SetStretchyCol(2);
S.TieChoice(_("Sample Rate Con&verter:"),
Resample::GetFastMethodKey(),
Resample::GetFastMethodDefault(),
mConverterNames,
mConverterLabels),
S.SetSizeHints(mConverterNames);
S.TieChoice(_("&Dither:"),
wxT("/Quality/DitherAlgorithm"),
Dither::none,
mDitherNames,
mDitherLabels);
S.SetSizeHints(mDitherNames);
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("High-quality Conversion"));
{
S.StartMultiColumn(2);
{
S.TieChoice(_("Sample Rate Conver&ter:"),
Resample::GetBestMethodKey(),
Resample::GetBestMethodDefault(),
mConverterNames,
mConverterLabels),
S.SetSizeHints(mConverterNames);
S.TieChoice(_("Dit&her:"),
wxT("/Quality/HQDitherAlgorithm"),
Dither::shaped,
mDitherNames,
mDitherLabels);
S.SetSizeHints(mDitherNames);
}
S.EndMultiColumn();
}
S.EndStatic();
}
void ChangeSpeedDialog::PopulateOrExchange(ShuttleGui & S)
{
wxTextValidator numvld(wxFILTER_NUMERIC);
wxArrayString rpm;
rpm.Add(wxT("33 1/3"));
rpm.Add(wxT("45"));
rpm.Add(wxT("78"));
/* i18n-hint: n/a is an English abbreviation meaning "not applicable"
(in other words, unimportant, not relevant). */
rpm.Add(_("n/a"));
S.SetBorder(10);
S.StartHorizontalLay(wxCENTER, false);
{
S.AddTitle(_("Change Speed, affecting both Tempo and Pitch") +
wxString(wxT("\n\n")) +
_("by Vaughan Johnson && Dominic Mazzoni") +
wxString(wxT("\n")) +
_("using SampleRate, by Erik de Castro Lopo"));
}
S.EndHorizontalLay();
S.SetBorder(5);
//
S.StartMultiColumn(2, wxCENTER);
{
m_pTextCtrl_PercentChange = S.Id(ID_TEXT_PERCENTCHANGE)
.AddTextBox(_("Percent Change:"), wxT(""), 12);
m_pTextCtrl_PercentChange->SetValidator(numvld);
}
S.EndMultiColumn();
//
S.StartHorizontalLay(wxEXPAND);
{
S.SetStyle(wxSL_HORIZONTAL);
m_pSlider_PercentChange = S.Id(ID_SLIDER_PERCENTCHANGE)
.AddSlider(wxT(""), 0, (int)PERCENTCHANGE_MAX, (int)PERCENTCHANGE_MIN);
m_pSlider_PercentChange->SetName(_("Percent Change"));
}
S.EndHorizontalLay();
//
S.StartMultiColumn(5, wxCENTER);
{
//
S.AddUnits(_("Standard Vinyl RPM:"));
m_pChoice_FromVinyl = S.Id(ID_CHOICE_FROMVINYL)
.AddChoice(_("from"), wxT(""), &rpm);
m_pChoice_FromVinyl->SetName(_("From RPM"));
m_pChoice_FromVinyl->SetSizeHints(100, -1);
m_pChoice_ToVinyl = S.Id(ID_CHOICE_TOVINYL)
.AddChoice(_("to"), wxT(""), &rpm);
m_pChoice_ToVinyl->SetName(_("To RPM"));
m_pChoice_ToVinyl->SetSizeHints(100, -1);
}
S.EndMultiColumn();
return;
}
/// Normally in classes derived from PrefsPanel this function
/// is used both to populate the panel and to exchange data with it.
/// With KeyConfigPrefs all the exchanges are handled specially,
/// so this is only used in populating the panel.
void KeyConfigPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("Key Bindings"), 1);
{
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol(1);
S.StartHorizontalLay(wxALIGN_LEFT|wxALIGN_CENTER_VERTICAL, 0);
{
S.AddTitle(_("View by:"));
S.StartRadioButtonGroup(wxT("/Prefs/KeyConfig/ViewBy"), wxT("tree"));
{
mViewByTree = S.Id(ViewByTreeID).TieRadioButton(_("&Tree"), wxT("tree"));
mViewByTree->SetName(_("View by tree"));
mViewByName = S.Id(ViewByNameID).TieRadioButton(_("&Name"), wxT("name"));
mViewByName->SetName(_("View by name"));
mViewByKey = S.Id(ViewByKeyID).TieRadioButton(_("&Key"), wxT("key"));
mViewByKey->SetName(_("View by key"));
}
S.EndRadioButtonGroup();
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxALIGN_CENTER|wxALIGN_CENTER_VERTICAL, 0);
{
// just a spacer
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxALIGN_RIGHT|wxALIGN_CENTER_VERTICAL, 0);
{
mFilterLabel = S.AddVariableText(_("Searc&h:"));
if (!mFilter) {
mFilter = safenew wxTextCtrl(this,
FilterID,
wxT(""),
wxDefaultPosition,
#if defined(__WXMAC__)
wxSize(300, -1),
#else
wxSize(210, -1),
#endif
wxTE_PROCESS_ENTER);
mFilter->SetName(wxStripMenuCodes(mFilterLabel->GetLabel()));
mFilter->Connect(wxEVT_KEY_DOWN,
wxKeyEventHandler(KeyConfigPrefs::OnFilterKeyDown),
NULL,
this);
mFilter->Connect(wxEVT_CHAR,
wxKeyEventHandler(KeyConfigPrefs::OnFilterChar),
NULL,
this);
}
S.AddWindow(mFilter, wxALIGN_NOT | wxALIGN_LEFT);
}
S.EndHorizontalLay();
}
S.EndThreeColumn();
S.AddSpace(-1, 2);
S.StartHorizontalLay(wxEXPAND, 1);
{
if (!mView) {
mView = safenew KeyView(this, CommandsListID);
mView->SetName(_("Bindings"));
}
S.Prop(true);
S.AddWindow(mView, wxEXPAND);
}
S.EndHorizontalLay();
S.StartThreeColumn();
{
if (!mKey) {
mKey = safenew wxTextCtrl(this,
CurrentComboID,
wxT(""),
wxDefaultPosition,
#if defined(__WXMAC__)
wxSize(300, -1),
#else
wxSize(210, -1),
#endif
wxTE_PROCESS_ENTER);
mKey->SetName(_("Short cut"));
mKey->Connect(wxEVT_KEY_DOWN,
wxKeyEventHandler(KeyConfigPrefs::OnHotkeyKeyDown),
NULL,
this);
mKey->Connect(wxEVT_CHAR,
wxKeyEventHandler(KeyConfigPrefs::OnHotkeyChar),
NULL,
this);
mKey->Connect(wxEVT_KILL_FOCUS,
wxFocusEventHandler(KeyConfigPrefs::OnHotkeyKillFocus),
NULL,
this);
}
S.AddWindow(mKey);
/* i18n-hint: (verb)*/
mSet = S.Id(SetButtonID).AddButton(_("&Set"));
mClear = S.Id(ClearButtonID).AddButton(_("Cl&ear"));
}
S.EndThreeColumn();
#if defined(__WXMAC__)
S.AddFixedText(_("Note: Pressing Cmd+Q will quit. All other keys are valid."));
#endif
S.StartThreeColumn();
{
S.Id(ImportButtonID).AddButton(_("&Import..."));
S.Id(ExportButtonID).AddButton(_("&Export..."));
S.Id(AssignDefaultsButtonID).AddButton(_("&Defaults"));
}
S.EndThreeColumn();
}
S.EndStatic();
// Need to layout so that the KeyView is properly sized before populating.
// Otherwise, the initial selection is not scrolled into view.
Layout();
}
void GUIPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartScroller();
S.StartStatic(_("Display"));
{
S.StartMultiColumn(2);
{
#ifdef EXPERIMENTAL_DA
const wxString defaultTheme = wxT("dark");
#else
const wxString defaultTheme = wxT("light");
#endif
const wxString defaultRange = wxString::Format(wxT("%d"), ENV_DB_RANGE);
S.TieChoice(_("&Language:"),
wxT("/Locale/Language"),
wxT(""),
mLangNames,
mLangCodes);
S.SetSizeHints(mLangNames);
S.TieChoice(_("Location of &Manual:"),
wxT("/GUI/Help"),
wxT("Local"),
mHtmlHelpChoices,
mHtmlHelpCodes);
S.SetSizeHints(mHtmlHelpChoices);
S.TieChoice(_("Th&eme:"),
wxT("/GUI/Theme"),
defaultTheme,
mThemeChoices,
mThemeCodes);
S.SetSizeHints(mThemeChoices);
S.TieChoice(_("Meter dB &range:"),
ENV_DB_KEY,
defaultRange,
mRangeChoices,
mRangeCodes);
S.SetSizeHints(mRangeChoices);
}
S.EndMultiColumn();
// S.AddSpace(10);
// JKC: This is a silly preference. Kept here as a reminder that we may
// later want to have configurable button order.
// S.TieCheckBox(_("&Ergonomic order of Transport Toolbar buttons"),
// wxT("/GUI/ErgonomicTransportButtons"),
// true);
}
S.EndStatic();
S.StartStatic(_("Show"));
{
S.TieCheckBox(_("'How to Get &Help' at launch"),
wxT("/GUI/ShowSplashScreen"),
true);
S.TieCheckBox(_("E&xtra menus"),
wxT("/GUI/ShowExtraMenus"),
false);
#ifdef EXPERIMENTAL_THEME_PREFS
// We do not want to make this option mainstream. It's a
// convenience for developers.
S.TieCheckBox(_("Show alternative &styling (Mac vs PC)"),
wxT("/GUI/ShowMac"),
false);
#endif
}
S.EndStatic();
S.StartStatic(_("Behaviors"));
{
S.TieCheckBox(_("&Beep on completion of longer activities"),
wxT("/GUI/BeepOnCompletion"),
false);
S.TieCheckBox(_("Re&tain labels if selection snaps to a label"),
wxT("/GUI/RetainLabels"),
false);
S.TieCheckBox(_("B&lend system and Audacity theme"),
wxT("/GUI/BlendThemes"),
true);
}
S.EndStatic();
S.EndScroller();
}
void EffectCompressor::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(5);
S.StartHorizontalLay(wxEXPAND, true);
{
S.SetBorder(10);
mPanel = safenew EffectCompressorPanel(S.GetParent(),
mThresholdDB,
mNoiseFloorDB,
mRatio);
mPanel->SetMinSize(wxSize(400, 200));
S.Prop(true).AddWindow(mPanel, wxEXPAND | wxALL);
S.SetBorder(5);
}
S.EndHorizontalLay();
S.StartStatic(wxT(""));
{
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol(1);
mThresholdLabel = S.AddVariableText(_("Threshold:"), true,
wxALIGN_RIGHT | wxALIGN_CENTER_VERTICAL);
S.SetStyle(wxSL_HORIZONTAL);
mThresholdSlider = S.Id(ID_Threshold).AddSlider(wxT(""),
DEF_Threshold * SCL_Threshold,
MAX_Threshold * SCL_Threshold,
MIN_Threshold * SCL_Threshold);
mThresholdSlider->SetName(_("Threshold"));
mThresholdText = S.AddVariableText(wxT("XXX dB"), true,
wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL);
mNoiseFloorLabel = S.AddVariableText(_("Noise Floor:"), true,
wxALIGN_RIGHT | wxALIGN_CENTER_VERTICAL);
S.SetStyle(wxSL_HORIZONTAL);
mNoiseFloorSlider = S.Id(ID_NoiseFloor).AddSlider(wxT(""),
DEF_NoiseFloor / SCL_NoiseFloor,
MAX_NoiseFloor / SCL_NoiseFloor,
MIN_NoiseFloor / SCL_NoiseFloor);
mNoiseFloorSlider->SetName(_("Noise Floor"));
mNoiseFloorText = S.AddVariableText(wxT("XXX dB"), true,
wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL);
mRatioLabel = S.AddVariableText(_("Ratio:"), true,
wxALIGN_RIGHT | wxALIGN_CENTER_VERTICAL);
S.SetStyle(wxSL_HORIZONTAL);
mRatioSlider = S.Id(ID_Ratio).AddSlider(wxT(""),
DEF_Ratio * SCL_Ratio,
MAX_Ratio * SCL_Ratio,
MIN_Ratio * SCL_Ratio);
mRatioSlider->SetName(_("Ratio"));
mRatioSlider->SetPageSize(5);
mRatioText = S.AddVariableText(wxT("XXXX:1"), true,
wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL);
/* i18n-hint: Particularly in percussion, sounds can be regarded as having
* an 'attack' phase where the sound builds up and a 'decay' where the
* sound dies away. So this means 'onset duration'. */
mAttackLabel = S.AddVariableText(_("Attack Time:"), true,
wxALIGN_RIGHT | wxALIGN_CENTER_VERTICAL);
S.SetStyle(wxSL_HORIZONTAL);
mAttackSlider = S.Id(ID_Attack).AddSlider(wxT(""),
DEF_AttackTime * SCL_AttackTime,
MAX_AttackTime * SCL_AttackTime,
MIN_AttackTime * SCL_AttackTime);
mAttackSlider->SetName(_("Attack Time"));
mAttackText = S.AddVariableText(wxT("XXXX secs"), true,
wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL);
mDecayLabel = S.AddVariableText(_("Release Time:"), true,
wxALIGN_RIGHT | wxALIGN_CENTER_VERTICAL);
S.SetStyle(wxSL_HORIZONTAL);
mDecaySlider = S.Id(ID_Decay).AddSlider(wxT(""),
DEF_ReleaseTime * SCL_ReleaseTime,
MAX_ReleaseTime * SCL_ReleaseTime,
MIN_ReleaseTime * SCL_ReleaseTime);
mDecaySlider->SetName(_("Release Time"));
mDecayText = S.AddVariableText(wxT("XXXX secs"), true,
wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL);
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartHorizontalLay(wxCENTER, false);
{
/* i18n-hint: Make-up, i.e. correct for any reduction, rather than fabricate it.*/
mGainCheckBox = S.AddCheckBox(_("Make-up gain for 0 dB after compressing"),
DEF_Normalize ? wxT("true") : wxT("false"));
mPeakCheckBox = S.AddCheckBox(_("Compress based on Peaks"),
DEF_UsePeak ? wxT("true") : wxT("false"));
}
S.EndHorizontalLay();
}
void MidiIOPrefs::PopulateOrExchange( ShuttleGui & S ) {
wxArrayString empty;
S.SetBorder(2);
S.StartStatic(_("Interface"));
{
S.StartMultiColumn(2);
{
S.Id(HostID);
/* i18n-hint: (noun) */
mHost = S.TieChoice(_("Host") + wxString(wxT(":")),
wxT("/MidiIO/Host"),
wxT(""),
mHostNames,
mHostLabels);
S.SetSizeHints(mHostNames);
S.AddPrompt(_("Using: PortMidi"));
}
S.EndMultiColumn();
}
S.EndStatic();
S.StartStatic(_("Playback"));
{
S.StartMultiColumn(2);
{
S.Id(PlayID);
mPlay = S.AddChoice(_("Device") + wxString(wxT(":")),
wxEmptyString,
&empty);
int latency = gPrefs->Read(wxT("/MidiIO/OutputLatency"),
DEFAULT_SYNTH_LATENCY);
mLatency = S.TieNumericTextBox(_("MIDI Synthesizer Latency (ms):"),
wxT("/MidiIO/SynthLatency"),
latency, 3);
}
S.EndMultiColumn();
}
S.EndStatic();
#ifdef EXPERIMENTAL_MIDI_IN
S.StartStatic(_("Recording"));
{
S.StartMultiColumn(2);
{
S.Id(RecordID);
mRecord = S.AddChoice(_("Device") + wxString(wxT(":")),
wxEmptyString,
&empty);
S.Id(ChannelsID);
/*
mChannels = S.AddChoice(_("Channels") + wxString(wxT(":")),
wxEmptyString,
&empty);
*/
}
S.EndMultiColumn();
}
S.EndStatic();
#endif
}
void EffectChangePitch::PopulateOrExchange(ShuttleGui & S)
{
DeduceFrequencies(); // Set frequency-related control values based on sample.
wxArrayString pitch;
pitch.Add(wxT("C"));
pitch.Add(wxT("C#/Db"));
pitch.Add(wxT("D"));
pitch.Add(wxT("D#/Eb"));
pitch.Add(wxT("E"));
pitch.Add(wxT("F"));
pitch.Add(wxT("F#/Gb"));
pitch.Add(wxT("G"));
pitch.Add(wxT("G#/Ab"));
pitch.Add(wxT("A"));
pitch.Add(wxT("A#/Bb"));
pitch.Add(wxT("B"));
S.SetBorder(5);
S.StartVerticalLay(0);
{
S.StartVerticalLay();
{
S.AddTitle(_("Change Pitch without Changing Tempo"));
S.AddTitle(
wxString::Format(_("Estimated Start Pitch: %s%d (%.3f Hz)"),
pitch[m_nFromPitch].c_str(), m_nFromOctave, m_FromFrequency));
}
S.EndVerticalLay();
/* i18n-hint: (noun) Musical pitch.*/
S.StartStatic(_("Pitch"));
{
S.StartMultiColumn(6, wxALIGN_CENTER); // 6 controls, because each AddChoice adds a wxStaticText and a wxChoice.
{
m_pChoice_FromPitch = S.Id(ID_FromPitch).AddChoice(_("from"), wxT(""), &pitch);
m_pChoice_FromPitch->SetName(_("from"));
m_pChoice_FromPitch->SetSizeHints(80, -1);
m_pSpin_FromOctave = S.Id(ID_FromOctave).AddSpinCtrl(wxT(""), m_nFromOctave, INT_MAX, INT_MIN);
m_pSpin_FromOctave->SetName(_("from Octave"));
m_pSpin_FromOctave->SetSizeHints(50, -1);
m_pChoice_ToPitch = S.Id(ID_ToPitch).AddChoice(_("to"), wxT(""), &pitch);
m_pChoice_ToPitch->SetName(_("to"));
m_pChoice_ToPitch->SetSizeHints(80, -1);
m_pSpin_ToOctave =
S.Id(ID_ToOctave).AddSpinCtrl(wxT(""), m_nToOctave, INT_MAX, INT_MIN);
m_pSpin_ToOctave->SetName(_("to Octave"));
m_pSpin_ToOctave->SetSizeHints(50, -1);
}
S.EndMultiColumn();
S.StartHorizontalLay(wxALIGN_CENTER);
{
FloatingPointValidator<double> vldSemitones(2, &m_dSemitonesChange, NUM_VAL_TWO_TRAILING_ZEROES);
m_pTextCtrl_SemitonesChange =
S.Id(ID_SemitonesChange).AddTextBox(_("Semitones (half-steps):"), wxT(""), 12);
m_pTextCtrl_SemitonesChange->SetName(_("Semitones (half-steps)"));
m_pTextCtrl_SemitonesChange->SetValidator(vldSemitones);
}
S.EndHorizontalLay();
}
S.EndStatic();
S.StartStatic(_("Frequency"));
{
S.StartMultiColumn(5, wxALIGN_CENTER); // 5, because AddTextBox adds a wxStaticText and a wxTextCtrl.
{
FloatingPointValidator<double> vldFromFrequency(3, &m_FromFrequency, NUM_VAL_THREE_TRAILING_ZEROES);
vldFromFrequency.SetMin(0.0);
m_pTextCtrl_FromFrequency = S.Id(ID_FromFrequency).AddTextBox(_("from"), wxT(""), 12);
m_pTextCtrl_FromFrequency->SetName(_("from (Hz)"));
m_pTextCtrl_FromFrequency->SetValidator(vldFromFrequency);
FloatingPointValidator<double> vldToFrequency(3, &m_ToFrequency, NUM_VAL_THREE_TRAILING_ZEROES);
vldToFrequency.SetMin(0.0);
m_pTextCtrl_ToFrequency = S.Id(ID_ToFrequency).AddTextBox(_("to"), wxT(""), 12);
m_pTextCtrl_ToFrequency->SetName(_("to (Hz)"));
m_pTextCtrl_ToFrequency->SetValidator(vldToFrequency);
S.AddUnits(_("Hz"));
}
S.EndMultiColumn();
S.StartHorizontalLay(wxALIGN_CENTER);
{
FloatingPointValidator<double> vldPercentage(3, &m_dPercentChange, NUM_VAL_THREE_TRAILING_ZEROES);
vldPercentage.SetRange(MIN_Percentage, MAX_Percentage);
m_pTextCtrl_PercentChange = S.Id(ID_PercentChange).AddTextBox(_("Percent Change:"), wxT(""), 12);
m_pTextCtrl_PercentChange->SetValidator(vldPercentage);
}
S.EndHorizontalLay();
S.StartHorizontalLay(wxEXPAND);
{
S.SetStyle(wxSL_HORIZONTAL);
m_pSlider_PercentChange = S.Id(ID_PercentChange)
.AddSlider(wxT(""), 0, (int)kSliderMax, (int)MIN_Percentage);
m_pSlider_PercentChange->SetName(_("Percent Change"));
}
S.EndHorizontalLay();
}
S.EndStatic();
}
S.EndVerticalLay();
return;
}
void EffectPhaser::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(5);
S.AddSpace(0, 5);
S.StartMultiColumn(3, wxEXPAND);
{
S.SetStretchyCol(2);
IntegerValidator<int> vldStages(&mStages);
vldStages.SetRange(MIN_Stages, MAX_Stages);
mStagesT = S.Id(ID_Stages).AddTextBox(_("&Stages:"), wxT(""), 15);
mStagesT->SetValidator(vldStages);
S.SetStyle(wxSL_HORIZONTAL);
mStagesS = S.Id(ID_Stages).AddSlider(wxT(""), DEF_Stages * SCL_Stages, MAX_Stages * SCL_Stages, MIN_Stages * SCL_Stages);
mStagesS->SetName(_("Stages"));
mStagesS->SetLineSize(2);
mStagesS->SetMinSize(wxSize(100, -1));
IntegerValidator<int> vldDryWet(&mDryWet);
vldDryWet.SetRange(MIN_DryWet, MAX_DryWet);
mDryWetT = S.Id(ID_DryWet).AddTextBox(_("&Dry/Wet:"), wxT(""), 15);
mDryWetT->SetValidator(vldDryWet);
S.SetStyle(wxSL_HORIZONTAL);
mDryWetS = S.Id(ID_DryWet).AddSlider(wxT(""), DEF_DryWet * SCL_DryWet, MAX_DryWet * SCL_DryWet, MIN_DryWet * SCL_DryWet);
mDryWetS->SetName(_("Dry Wet"));
mDryWetS->SetMinSize(wxSize(100, -1));
FloatingPointValidator<double> vldFreq(5, &mFreq, NUM_VAL_ONE_TRAILING_ZERO);
vldFreq.SetRange(MIN_Freq, MAX_Freq);
mFreqT = S.Id(ID_Freq).AddTextBox(_("LFO Freq&uency (Hz):"), wxT(""), 15);
mFreqT->SetValidator(vldFreq);
S.SetStyle(wxSL_HORIZONTAL);
mFreqS = S.Id(ID_Freq).AddSlider(wxT(""), DEF_Freq * SCL_Freq, MAX_Freq * SCL_Freq, 0.0);
mFreqS ->SetName(_("LFO frequency in hertz"));
mFreqS ->SetMinSize(wxSize(100, -1));
FloatingPointValidator<double> vldPhase(1, &mPhase);
vldPhase.SetRange(MIN_Phase, MAX_Phase);
mPhaseT = S.Id(ID_Phase).AddTextBox(_("LFO Sta&rt Phase (deg.):"), wxT(""), 15);
mPhaseT->SetValidator(vldPhase);
S.SetStyle(wxSL_HORIZONTAL);
mPhaseS = S.Id(ID_Phase).AddSlider(wxT(""), DEF_Phase * SCL_Phase, MAX_Phase * SCL_Phase, MIN_Phase * SCL_Phase);
mPhaseS->SetName(_("LFO start phase in degrees"));
mPhaseS->SetLineSize(10);
mPhaseS->SetMinSize(wxSize(100, -1));
IntegerValidator<int> vldDepth(&mDepth);
vldDepth.SetRange(MIN_Depth, MAX_Depth);
mDepthT = S.Id(ID_Depth).AddTextBox(_("Dept&h:"), wxT(""), 15);
mDepthT->SetValidator(vldDepth);
S.SetStyle(wxSL_HORIZONTAL);
mDepthS = S.Id(ID_Depth).AddSlider(wxT(""), DEF_Depth * SCL_Depth, MAX_Depth * SCL_Depth, MIN_Depth * SCL_Depth);
mDepthS->SetName(_("Depth in percent"));
mDepthS->SetMinSize(wxSize(100, -1));
IntegerValidator<int> vldFeedback(&mFeedback);
vldFeedback.SetRange(MIN_Feedback, MAX_Feedback);
mFeedbackT = S.Id(ID_Feedback).AddTextBox(_("Feedbac&k (%):"), wxT(""), 15);
mFeedbackT->SetValidator(vldFeedback);
S.SetStyle(wxSL_HORIZONTAL);
mFeedbackS = S.Id(ID_Feedback).AddSlider(wxT(""), DEF_Feedback * SCL_Feedback, MAX_Feedback * SCL_Feedback, MIN_Feedback * SCL_Feedback);
mFeedbackS->SetName(_("Feedback in percent"));
mFeedbackS->SetLineSize(10);
mFeedbackS->SetMinSize(wxSize(100, -1));
FloatingPointValidator<double> vldoutgain(1, &mOutGain);
vldoutgain.SetRange(MIN_OutGain, MAX_OutGain);
mOutGainT = S.Id(ID_OutGain).AddTextBox(_("&Output gain (dB):"), wxT(""), 12);
mOutGainT->SetValidator(vldoutgain);
S.SetStyle(wxSL_HORIZONTAL);
mOutGainS = S.Id(ID_OutGain).AddSlider(wxT(""), DEF_OutGain * SCL_OutGain, MAX_OutGain * SCL_OutGain, MIN_OutGain * SCL_OutGain);
mOutGainS->SetName(_("Output gain (dB)"));
mOutGainS->SetMinSize(wxSize(100, -1));
}
S.EndMultiColumn();
}
void EffectsPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("Enable"));
{
#if USE_LADSPA
S.TieCheckBox(_("LADSPA effects"),
wxT("/Ladspa/Enable"),
true);
#endif
#if USE_NYQUIST
S.TieCheckBox(_("Nyquist effects"),
wxT("/Nyquist/Enable"),
true);
#endif
#if USE_VAMP
S.TieCheckBox(_("VAMP effects"),
wxT("/VAMP/Enable"),
true);
#endif
S.AddFixedText(_("Restart Audacity to apply changes."));
}
S.EndStatic();
#if USE_AUDIO_UNITS
S.StartStatic(_("Audio Unit Effects"));
{
S.TieCheckBox(_("Enable Audio Unit effects"),
wxT("/AudioUnits/Enable"),
true);
S.TieCheckBox(_("Display Audio Unit effects in graphical mode"),
wxT("/AudioUnits/GUI"),
true);
#if 0
S.TieCheckBox(_("Rescan VST effects next time Audacity is started"),
wxT("/VST/Rescan"),
false);
#endif
}
S.EndStatic();
#endif
#if USE_VST
S.StartStatic(_("VST Effects"));
{
S.TieCheckBox(_("Enable VST effects"),
wxT("/VST/Enable"),
true);
S.TieCheckBox(_("Display VST effects in graphical mode"),
wxT("/VST/GUI"),
true);
S.TieCheckBox(_("Rescan VST effects next time Audacity is started"),
wxT("/VST/Rescan"),
false);
}
S.EndStatic();
#endif
}
void ChangePitchDialog::PopulateOrExchange(ShuttleGui & S)
{
wxTextValidator nullvld(wxFILTER_INCLUDE_CHAR_LIST);
wxTextValidator numvld(wxFILTER_NUMERIC);
wxArrayString pitch;
pitch.Add(wxT("C"));
pitch.Add(wxT("C#/Db"));
pitch.Add(wxT("D"));
pitch.Add(wxT("D#/Eb"));
pitch.Add(wxT("E"));
pitch.Add(wxT("F"));
pitch.Add(wxT("F#/Gb"));
pitch.Add(wxT("G"));
pitch.Add(wxT("G#/Ab"));
pitch.Add(wxT("A"));
pitch.Add(wxT("A#/Bb"));
pitch.Add(wxT("B"));
S.SetBorder(10);
S.StartHorizontalLay(wxCENTER, false);
{
S.AddTitle(_("Change Pitch without Changing Tempo") +
wxString(wxT("\n\n")) +
_("by Vaughan Johnson && Dominic Mazzoni") +
wxString(wxT("\n")) +
_("using SoundTouch, by Olli Parviainen"));
}
S.EndHorizontalLay();
S.SetBorder(5);
//
S.StartMultiColumn(6, wxCENTER);
{
//
S.AddUnits(_("Pitch:"));
S.StartHorizontalLay(wxALIGN_CENTER_VERTICAL);
{
m_pChoice_FromPitch = S.Id(ID_CHOICE_FROMPITCH)
.AddChoice(_("From:"), wxT(""), &pitch);
m_pChoice_FromPitch->SetName(_("From Pitch"));
m_pChoice_FromPitch->SetSizeHints(100, -1);
}
S.EndHorizontalLay();
S.StartStatic(wxT(""));
{
S.StartVerticalLay();
{
S.SetBorder(3);
m_pRadioButton_PitchUp = S.Id(ID_RADIOBUTTON_PITCHUPDOWN)
.AddRadioButton(_("Up"));
m_pRadioButton_PitchDown = S.Id(ID_RADIOBUTTON_PITCHUPDOWN)
.AddRadioButtonToGroup(_("Down"));
S.SetBorder(5);
}
S.EndVerticalLay();
}
S.EndStatic();
S.StartHorizontalLay(wxALIGN_CENTER_VERTICAL);
{
m_pChoice_ToPitch = S.Id(ID_CHOICE_TOPITCH)
.AddChoice(_("To:"), wxT(""), &pitch);
m_pChoice_ToPitch->SetName(_("To Pitch"));
m_pChoice_ToPitch->SetSizeHints(100, -1);
}
S.EndHorizontalLay();
}
S.EndMultiColumn();
//
S.StartMultiColumn(2, wxCENTER);
{
//
S.AddPrompt(_("Semitones (half-steps):"));
S.StartHorizontalLay(wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL, false);
{
m_pTextCtrl_SemitonesChange = S.Id(ID_TEXT_SEMITONESCHANGE)
.AddTextBox(wxT(""), wxT(""), 12);
m_pTextCtrl_SemitonesChange->SetName(_("Semitones in half-steps"));
m_pTextCtrl_SemitonesChange->SetValidator(numvld);
}
S.EndHorizontalLay();
//
S.AddPrompt(_("Frequency (Hz):"));
S.StartHorizontalLay(wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL, false);
{
m_pTextCtrl_FromFrequency = S.Id(ID_TEXT_FROMFREQUENCY)
.AddTextBox(_("from"), wxT(""), 12);
m_pTextCtrl_FromFrequency->SetName(_("From frequency in hertz"));
m_pTextCtrl_FromFrequency->SetValidator(nullvld);
m_pTextCtrl_ToFrequency = S.Id(ID_TEXT_TOFREQUENCY)
.AddTextBox(_("to"), wxT(""), 12);
m_pTextCtrl_ToFrequency->SetName(_("To frequency in seconds"));
m_pTextCtrl_ToFrequency->SetValidator(numvld);
}
S.EndHorizontalLay();
//
S.AddPrompt(_("Percent Change:"));
S.StartHorizontalLay(wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL, false);
{
m_pTextCtrl_PercentChange = S.Id(ID_TEXT_PERCENTCHANGE)
.AddTextBox(wxT(""), wxT(""), 12);
m_pTextCtrl_PercentChange->SetName(_("Percent Change"));
m_pTextCtrl_PercentChange->SetValidator(numvld);
}
S.EndHorizontalLay();
}
S.EndMultiColumn();
//
S.StartHorizontalLay(wxEXPAND);
{
S.SetStyle(wxSL_HORIZONTAL);
m_pSlider_PercentChange = S.Id(ID_SLIDER_PERCENTCHANGE)
.AddSlider(wxT(""), 0, (int)PERCENTCHANGE_MAX, (int)PERCENTCHANGE_MIN);
m_pSlider_PercentChange->SetName(_("Percent Change"));
}
S.EndHorizontalLay();
return;
}
void SplashDialog::Populate( ShuttleGui & S )
{
//#if ((AUDACITY_BRANDING == BRAND_JAMLING__EASY) || (AUDACITY_BRANDING == BRAND_JAMLING__FULL))
// this->SetBackgroundColour(wxColour(rrr, ggg, bbb)); // same as waveform color
//#else
// this->SetBackgroundColour(theTheme.Colour( clrAboutBoxBackground ));
//#endif
this->SetBackgroundColour(theTheme.Colour( clrAboutBoxBackground ));
bool bShow;
gPrefs->Read(wxT("/GUI/ShowSplashScreen"), &bShow, true );
S.StartVerticalLay(1);
wxImage buttonImageUp;
wxImage buttonImageOver;
wxSize buttonSize;
wxBitmap* pButtonBitmap;
wxBitmap* pButtonBitmapOver;
//vvv Change this compile flag when other brands are supported.
#if ((AUDACITY_BRANDING == BRAND_JAMLING__EASY) || (AUDACITY_BRANDING == BRAND_JAMLING__FULL))
//vvv Compiles only BRAND_JAMLING__EASY or BRAND_JAMLING__FULL
// because we don't load any other company_logo*_xpm consts yet.
pButtonBitmap = new wxBitmap(company_logo_xpm);
buttonImageUp = pButtonBitmap->ConvertToImage();
pButtonBitmapOver = new wxBitmap(company_logo_over_xpm);
buttonImageOver = pButtonBitmapOver->ConvertToImage();
buttonSize = wxSize(pButtonBitmap->GetWidth(), pButtonBitmap->GetHeight());
mButton_Logo =
new AButton(this, ID_BUTTON_LOGO,
wxDefaultPosition, buttonSize,
&buttonImageUp, &buttonImageOver,
&buttonImageUp, &buttonImageUp, //v other images?
true);
#else
//vvv For now, change to AudacityLogoWithName via old-fashioned ways, not Theme.
pButtonBitmap = //vvv theTheme.Bitmap(bmpAudacityLogoWithName)
new wxBitmap((const char **) AudacityLogoWithName_xpm);
buttonImageUp = pButtonBitmap->ConvertToImage();
// JKC: Resize to 50% of size. Later we may use a smaller xpm as
// our source, but this allows us to tweak the size - if we want to.
// It also makes it easier to revert to full size if we decide to.
const float fScale=0.5f;// smaller size.
buttonSize = wxSize(LOGOWITHNAME_WIDTH * fScale, LOGOWITHNAME_HEIGHT * fScale);
// wxIMAGE_QUALITY_HIGH not supported by wxWidgets 2.6.x, or we would use it here.
buttonImageUp.Rescale(buttonSize.GetWidth(), buttonSize.GetHeight());
buttonImageOver = buttonImageUp.Copy();
buttonImageOver.RotateHue(-0.01);
mButton_Logo =
new AButton(this, ID_BUTTON_LOGO,
wxDefaultPosition, buttonSize,
&buttonImageUp, &buttonImageOver,
&buttonImageUp, &buttonImageUp, //v other images?
true);
#endif
S.Prop(0).AddWindow(mButton_Logo);
mpHtml = new LinkingHtmlWindow(S.GetParent(), -1,
wxDefaultPosition,
wxSize(kWidth, 280),
wxHW_SCROLLBAR_AUTO | wxSUNKEN_BORDER );
mpHtml->SetPage(HelpText( wxT("welcome") ));
S.Prop(1).AddWindow( mpHtml, wxEXPAND );
S.Prop(0).StartMultiColumn(2, wxEXPAND);
S.SetStretchyCol( 1 );// Column 1 is stretchy...
{
S.SetBorder( 5 );
S.Id( DontShowID).AddCheckBox( _("Don't show this again at start up"), bShow ? wxT("false") : wxT("true") );
wxButton *ok = new wxButton(S.GetParent(), wxID_OK);
ok->SetDefault();
ok->SetFocus();
S.SetBorder( 5 );
S.Prop(0).AddWindow( ok, wxALIGN_RIGHT| wxALL );
}
S.EndVerticalLay();
}
void ExtImportPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.TieCheckBox(_("Attempt to use filter in OpenFile dialog first"),
wxT("/ExtendedImport/OverrideExtendedImportByOpenFileDialogChoice"),
true);
S.StartStatic(_("Rules to choose import filters"), 1);
{
S.SetSizerProportion(1);
S.StartHorizontalLay (wxEXPAND, 1);
{
bool fillRuleTable = false;
if (RuleTable == NULL)
{
RuleTable = new Grid(S.GetParent(),EIPRuleTable);
RuleTable->SetColLabelSize(RuleTable->GetDefaultRowSize());
#if EXTIMPORT_MIME_SUPPORT
RuleTable->CreateGrid (0, 2, wxGrid::wxGridSelectRows);
#else
RuleTable->CreateGrid (0, 1, wxGrid::wxGridSelectRows);
#endif
RuleTable->DisableDragColMove ();
RuleTable->DisableDragRowSize ();
RuleTable->SetDefaultCellAlignment(wxALIGN_LEFT, wxALIGN_CENTER);
RuleTable->SetColLabelValue (0, _("File extensions"));
#if EXTIMPORT_MIME_SUPPORT
RuleTable->SetColLabelValue (1, _("Mime-types"));
#endif
RuleTable->SetRowLabelSize (0);
RuleTable->SetSelectionMode (wxGrid::wxGridSelectRows);
RuleTable->AutoSizeColumns ();
RuleTable->SetDropTarget (dragtarget1);
RuleTable->EnableDragCell (true);
fillRuleTable = true;
}
S.AddWindow(RuleTable, wxEXPAND | wxALL);
PluginList = S.Id(EIPPluginList).AddListControl ();
if (fillRuleTable)
{
PluginList->SetSingleStyle (wxLC_REPORT, true);
PluginList->SetSingleStyle (wxLC_SINGLE_SEL, true);
PluginList->InsertColumn (0, _("Importer order"));
PluginList->SetDropTarget (dragtarget2);
ExtImportItems *items = wxGetApp().mImporter->GetImportItems();
for (unsigned int i = 0; i < items->Count(); i++)
AddItemToTable (i, &(*items)[i]);
if (items->Count() > 0)
{
RuleTable->SelectRow(0);
RuleTable->SetGridCursor(0,0);
}
}
}
S.EndHorizontalLay();
S.StartHorizontalLay (wxSHRINK, 0);
{
MoveRuleUp = S.Id (EIPMoveRuleUp).AddButton (_("Move rule &up"));
MoveRuleDown = S.Id (EIPMoveRuleDown).AddButton
(_("Move rule &down"));
MoveFilterUp = S.Id (EIPMoveFilterUp).AddButton
(_("Move f&ilter up"));
MoveFilterDown = S.Id (EIPMoveFilterDown).AddButton
(_("Move &filter down"));
}
S.EndHorizontalLay();
S.StartHorizontalLay (wxSHRINK, 0);
{
AddRule = S.Id (EIPAddRule).AddButton (_("&Add new rule"));
DelRule = S.Id (EIPDelRule).AddButton (_("De&lete selected rule"));
}
S.EndHorizontalLay();
}
S.EndStatic();
Layout();
Fit();
SetMinSize(GetSize());
}
/// This PopulateOrExchange function is a good example of mixing the fully
/// automatic style of reading/writing from GUI to prefs with the partial form.
///
/// You'll notice that some of the Tie functions have Prefs identifiers in them
/// and others don't.
void LibraryPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("MP3 Export Library"));
{
S.StartTwoColumn();
{
S.AddVariableText(_("MP3 Library Version:"),
true,
wxALL | wxALIGN_RIGHT | wxALIGN_CENTRE_VERTICAL);
mMP3Version = S.AddVariableText(wxT("9.99"),
true,
wxALL | wxALIGN_LEFT | wxALIGN_CENTRE_VERTICAL);
S.AddVariableText(_("MP3 Library:"),
true,
wxALL | wxALIGN_RIGHT | wxALIGN_CENTRE_VERTICAL);
wxButton *locate_button = S.Id(ID_MP3_FIND_BUTTON).AddButton(_("&Locate..."),
wxALL | wxALIGN_LEFT | wxALIGN_CENTRE_VERTICAL);
S.AddVariableText(_("LAME MP3 Library:"),
true,
wxALL | wxALIGN_RIGHT | wxALIGN_CENTRE_VERTICAL);
wxButton *download_button = S.Id(ID_MP3_DOWN_BUTTON).AddButton(_("&Download"),
wxALL | wxALIGN_LEFT | wxALIGN_CENTRE_VERTICAL);
#ifdef DISABLE_DYNAMIC_LOADING_LAME
locate_button->Enable(FALSE);
download_button->Enable(FALSE);
#else
(void)locate_button;
(void)download_button;
#endif // DISABLE_DYNAMIC_LOADING_LAME
}
S.EndTwoColumn();
}
S.EndStatic();
S.StartStatic(_("FFmpeg Import/Export Library"));
{
S.StartTwoColumn();
{
S.AddVariableText(_("FFmpeg Library Version:"),
true,
wxALL | wxALIGN_RIGHT | wxALIGN_CENTRE_VERTICAL);
#if defined(USE_FFMPEG)
mFFmpegVersion = S.AddVariableText(_("No compatible FFmpeg library was found"),
true,
wxALL | wxALIGN_LEFT | wxALIGN_CENTRE_VERTICAL);
#else
mFFmpegVersion = S.AddVariableText(wxT("FFmpeg support is not compiled in"),
true,
wxALL | wxALIGN_LEFT | wxALIGN_CENTRE_VERTICAL);
#endif
S.AddVariableText(_("FFmpeg Library:"),
true,
wxALL | wxALIGN_RIGHT | wxALIGN_CENTRE_VERTICAL);
S.Id(ID_FFMPEG_FIND_BUTTON);
wxButton *bfnd = S.AddButton(_("Loca&te..."),
wxALL | wxALIGN_LEFT | wxALIGN_CENTRE_VERTICAL);
S.AddVariableText(_("FFmpeg Library:"),
true,
wxALL | wxALIGN_RIGHT | wxALIGN_CENTRE_VERTICAL);
S.Id(ID_FFMPEG_DOWN_BUTTON);
wxButton *bdwn = S.AddButton(_("Dow&nload"),
wxALL | wxALIGN_LEFT | wxALIGN_CENTRE_VERTICAL);
#if !defined(USE_FFMPEG) || defined(DISABLE_DYNAMIC_LOADING_FFMPEG)
bdwn->Enable(FALSE);
bfnd->Enable(FALSE);
#else
// fix compilation warnings about unused variables
bfnd, bdwn;
#endif
}
S.EndTwoColumn();
#ifdef EXPERIMENTAL_OD_FFMPEG
wxCheckBox* checkbox = S.TieCheckBox(_("Allow &background on-demand loading"),
wxT("/Library/FFmpegOnDemand"),
false);
#if !defined(USE_FFMPEG)
checkbox->Enable(FALSE);
#endif
#endif
}
S.EndStatic();
}
void QualityPrefs::PopulateOrExchange( ShuttleGui & S )
{
S.SetBorder( 2 );
S.StartStatic(_("Sampling"),0 );
{
S.StartTwoColumn();
S.AddPrompt( _("Default Sample Rate:") );
DefineSampleRateControl( S ); // A tricky control.
S.TieChoice(_("Default Sample Format:"),
wxT("/SamplingRate/DefaultProjectSampleFormat"),
floatSample, mmSampleFormatNames, mmSampleFormatLabels );
// JKC For the old style of layout, uncomment the next line.
// #define OLD_STYLE_LAYOUT
// Once we've chosen which layout to use we'll remove the
// other one. (June/2006).
#ifdef OLD_STYLE_LAYOUT
S.TieChoice(_("Real-time sample rate converter:"),
wxT("/Quality/LibresampleSampleRateConverter"),
(int)0, mConverterNames, mConverterLabels),
S.TieChoice(_("High-quality sample rate converter:"),
wxT("/Quality/LibresampleHQSampleRateConverter"),
(int)1, mConverterNames, mConverterLabels),
S.TieChoice(_("Real-time dither:"),
wxT("/Quality/DitherAlgorithm"),
Dither::none, mmDitherNames, mmDitherLabels );
S.TieChoice(_("High-quality dither:"),
wxT("/Quality/HQDitherAlgorithm"),
Dither::shaped, mmDitherNames, mmDitherLabels );
#endif
S.EndTwoColumn();
}
S.EndStatic();
// The new style of layout has
// - columns for converter and dither.
// - rows for Real-time and High-quality.
#ifndef OLD_STYLE_LAYOUT
S.StartStatic( _("Conversion") );
{
// We use blank labels here and there to end up with
// a three column layout.
S.StartMultiColumn(3);
S.AddFixedText(wxT(""));
S.AddTitle(_("Sample Rate Converter" ));
S.AddTitle(_("Dither"));
S.TieChoice(_("Real-time:"),
wxT("/Quality/LibresampleSampleRateConverter"),
(int)0, mConverterNames, mConverterLabels),
S.TieChoice(wxT(""),
wxT("/Quality/DitherAlgorithm"),
Dither::none, mmDitherNames, mmDitherLabels );
S.TieChoice(_("High-quality:"),
wxT("/Quality/LibresampleHQSampleRateConverter"),
(int)1, mConverterNames, mConverterLabels),
S.TieChoice(wxT(""),
wxT("/Quality/HQDitherAlgorithm"),
Dither::shaped, mmDitherNames, mmDitherLabels );
S.EndMultiColumn();
}
S.EndStatic();
#endif
}
void TracksPrefs::PopulateOrExchange(ShuttleGui & S)
{
S.SetBorder(2);
S.StartStatic(_("Display"));
{
S.TieCheckBox(_("&Update display while playing"),
wxT("/GUI/AutoScroll"),
true);
S.TieCheckBox(_("Automatically &fit tracks vertically zoomed"),
wxT("/GUI/TracksFitVerticallyZoomed"),
false);
S.AddSpace(10);
S.StartMultiColumn(2);
{
S.TieChoice(_("Default &view mode:"),
wxT("/GUI/DefaultViewModeNew"),
0,
mViewChoices,
mViewCodes);
S.SetSizeHints(mViewChoices);
S.TieTextBox(_("Default audio track &name:"),
wxT("/GUI/TrackNames/DefaultTrackName"),
_("Audio Track"),
30);
}
S.EndMultiColumn();
S.TieCheckBox(_("Sho&w audio track name as overlay"),
wxT("/GUI/ShowTrackNameInWaveform"),
false);
}
S.EndStatic();
S.StartStatic(_("Behaviors"));
{
S.TieCheckBox(_("&Select all audio in project, if none selected"),
wxT("/GUI/SelectAllOnNone"),
true);
/* i18n-hint: cut-lines are a lines indicating where to cut.*/
S.TieCheckBox(_("Enable cu&t lines"),
wxT("/GUI/EnableCutLines"),
false);
S.TieCheckBox(_("Enable &dragging of left and right selection edges"),
wxT("/GUI/AdjustSelectionEdges"),
true);
S.TieCheckBox(_("\"Move track focus\" c&ycles repeatedly through tracks"),
wxT("/GUI/CircularTrackNavigation"),
false);
S.TieCheckBox(_("Editing a clip can &move other clips"),
wxT("/GUI/EditClipCanMove"),
true);
#ifdef EXPERIMENTAL_SCROLLING_LIMITS
S.TieCheckBox(_("Enable scrolling left of &zero"),
wxT("/GUI/ScrollBeyondZero"),
false);
#endif
S.AddSpace(10);
S.StartMultiColumn(2);
{
S.TieChoice(_("Solo &Button:"),
wxT("/GUI/Solo"),
wxT("Standard"),
mSoloChoices,
mSoloCodes);
S.SetSizeHints(mSoloChoices);
}
S.EndMultiColumn();
}
S.EndStatic();
}
void ChangeTempoDialog::PopulateOrExchange(ShuttleGui & S)
{
wxTextValidator nullvld(wxFILTER_INCLUDE_CHAR_LIST);
wxTextValidator numvld(wxFILTER_NUMERIC);
S.SetBorder(10);
S.StartHorizontalLay(wxCENTER, false);
{
S.AddTitle(_("Change Tempo without Changing Pitch") +
wxString(wxT("\n\n")) +
_("by Vaughan Johnson && Dominic Mazzoni") +
wxString(wxT("\n")) +
_("using SoundTouch, by Olli Parviainen"));
}
S.EndHorizontalLay();
S.SetBorder(5);
//
S.StartMultiColumn(2, wxCENTER);
{
m_pTextCtrl_PercentChange = S.Id(ID_TEXT_PERCENTCHANGE)
.AddTextBox(_("Percent Change:"), wxT(""), 12);
m_pTextCtrl_PercentChange->SetValidator(numvld);
}
S.EndMultiColumn();
//
S.StartHorizontalLay(wxEXPAND);
{
S.SetStyle(wxSL_HORIZONTAL);
m_pSlider_PercentChange = S.Id(ID_SLIDER_PERCENTCHANGE)
.AddSlider(wxT(""), 0, (int)PERCENTCHANGE_MAX, (int)PERCENTCHANGE_MIN);
m_pSlider_PercentChange->SetName(_("Percent Change"));
}
S.EndHorizontalLay();
//
S.StartMultiColumn(5, wxCENTER);
{
//
S.AddUnits(_("Beats per minute:"));
m_pTextCtrl_FromBPM = S.Id(ID_TEXT_FROMBPM)
.AddTextBox(_("from"), wxT(""), 12);
m_pTextCtrl_FromBPM->SetName(_("From beats per minute"));
m_pTextCtrl_FromBPM->SetValidator(numvld);
m_pTextCtrl_ToBPM = S.Id(ID_TEXT_TOBPM)
.AddTextBox(_("to"), wxT(""), 12);
m_pTextCtrl_ToBPM->SetName(_("To beats per minute"));
m_pTextCtrl_ToBPM->SetValidator(numvld);
//
S.AddUnits(_("Length (seconds):"));
m_pTextCtrl_FromLength = S.Id(ID_TEXT_FROMLENGTH)
.AddTextBox(_("from"), wxT(""), 12);
m_pTextCtrl_FromLength->SetName(_("From length in seconds"));
m_pTextCtrl_FromLength->SetValidator(nullvld);
m_pTextCtrl_ToLength = S.Id(ID_TEXT_TOLENGTH)
.AddTextBox(_("to"), wxT(""), 12);
m_pTextCtrl_ToLength->SetName(_("To length in seconds"));
m_pTextCtrl_ToLength->SetValidator(numvld);
}
S.EndMultiColumn();
return;
}
void TimeScaleDialog::PopulateOrExchange(ShuttleGui & S)
{
wxTextValidator nullvld(wxFILTER_INCLUDE_CHAR_LIST);
wxTextValidator numvld(wxFILTER_NUMERIC);
S.SetBorder(5);
S.AddSpace(0, 5);
S.StartMultiColumn(2, 0);
// Rate Start
S.StartStatic(_("Initial Tempo Change (%)"));
{
S.StartMultiColumn(1, wxCENTER);
{
m_pTextCtrl_RatePercentChangeStart = S.Id(ID_TEXT_RATE_PERCENTCHANGE_START)
.AddTextBox(wxT(""), wxT(""), 12);
m_pTextCtrl_RatePercentChangeStart->SetValidator(numvld);
}
S.EndMultiColumn();
S.StartHorizontalLay(wxEXPAND,0);
{
S.SetStyle(wxSL_HORIZONTAL);
m_pSlider_RatePercentChangeStart = S.Id(ID_SLIDER_RATE_PERCENTCHANGE_START)
.AddSlider(wxT(""), (int)RATE_PERCENTCHANGE_DEFAULT, (int)RATE_PERCENTCHANGE_MAX_SLIDER, (int)RATE_PERCENTCHANGE_MIN_SLIDER);
}
S.EndHorizontalLay();
}
S.EndStatic();
S.StartStatic(_("Final Tempo Change (%)"));
{
S.StartMultiColumn(1, wxCENTER);
{
m_pTextCtrl_RatePercentChangeEnd = S.Id(ID_TEXT_RATE_PERCENTCHANGE_END)
.AddTextBox(wxT(""), wxT(""), 12);
m_pTextCtrl_RatePercentChangeEnd->SetValidator(numvld);
}
S.EndMultiColumn();
S.StartHorizontalLay(wxEXPAND,0);
{
S.SetStyle(wxSL_HORIZONTAL);
m_pSlider_RatePercentChangeEnd = S.Id(ID_SLIDER_RATE_PERCENTCHANGE_END)
.AddSlider(wxT(""), (int)RATE_PERCENTCHANGE_DEFAULT, (int)RATE_PERCENTCHANGE_MAX_SLIDER, (int)RATE_PERCENTCHANGE_MIN_SLIDER);
}
S.EndHorizontalLay();
}
S.EndStatic();
// Pitch Start
S.StartStatic(_("Initial Pitch Shift"));
{
S.StartMultiColumn(2, wxCENTER);
{
m_pTextCtrl_PitchHalfStepsStart = S.Id(ID_TEXT_PITCH_HALFSTEPS_START)
.AddTextBox(_("(semitones) [-12 to 12]:"), wxT(""), 12);
m_pTextCtrl_PitchHalfStepsStart->SetValidator(numvld);
m_pTextCtrl_PitchPercentChangeStart = S.Id(ID_TEXT_PITCH_PERCENTCHANGE_START)
.AddTextBox(_("(%) [-50 to 100]:"), wxT(""), 12);
m_pTextCtrl_PitchPercentChangeStart->SetValidator(numvld);
}
S.EndMultiColumn();
}
S.EndStatic();
// Pitch End
S.StartStatic(_("Final Pitch Shift"));
{
S.StartMultiColumn(2, wxCENTER);
{
m_pTextCtrl_PitchHalfStepsEnd = S.Id(ID_TEXT_PITCH_HALFSTEPS_END)
.AddTextBox(_("(semitones) [-12 to 12]:"), wxT(""), 12);
m_pTextCtrl_PitchHalfStepsEnd->SetValidator(numvld);
m_pTextCtrl_PitchPercentChangeEnd = S.Id(ID_TEXT_PITCH_PERCENTCHANGE_END)
.AddTextBox(_("(%) [-50 to 100]:"), wxT(""), 12);
m_pTextCtrl_PitchPercentChangeEnd->SetValidator(numvld);
}
S.EndMultiColumn();
}
S.EndStatic();
S.EndMultiColumn();
return;
}