BOARD_ITEM* SELECTION_TOOL::pickSmallestComponent( GENERAL_COLLECTOR* aCollector )
{
int count = aCollector->GetPrimaryCount(); // try to use preferred layer
if( 0 == count )
count = aCollector->GetCount();
for( int i = 0; i < count; ++i )
{
if( ( *aCollector )[i]->Type() != PCB_MODULE_T )
return NULL;
}
// All are modules, now find smallest MODULE
int minDim = 0x7FFFFFFF;
int minNdx = 0;
for( int i = 0; i < count; ++i )
{
MODULE* module = (MODULE*) ( *aCollector )[i];
int lx = module->GetBoundingBox().GetWidth();
int ly = module->GetBoundingBox().GetHeight();
int lmin = std::min( lx, ly );
if( lmin < minDim )
{
minDim = lmin;
minNdx = i;
}
}
return (*aCollector)[minNdx];
}
void PCB_BASE_FRAME::DeletePad( D_PAD* aPad, bool aQuery )
{
if( aPad == NULL )
return;
MODULE* module = aPad->GetParent();
module->SetLastEditTime();
// aQuery = true to prompt for confirmation, false to delete silently
if( aQuery )
{
wxString msg = wxString::Format( _( "Delete pad (footprint %s %s)?" ),
module->GetReference(),
module->GetValue() );
if( !IsOK( this, msg ) )
return;
}
// Stores the initial bounding box to refresh the old area
EDA_RECT bbox = module->GetBoundingBox();
m_Pcb->m_Status_Pcb = 0;
GetBoard()->PadDelete( aPad );
// Update the bounding box
module->CalculateBoundingBox();
// Refresh the modified screen area, using the initial bounding box
// which is perhaps larger than the new bounding box
m_canvas->RefreshDrawingRect( bbox );
OnModify();
}
void PCB_BASE_FRAME::DeletePad( D_PAD* aPad, bool aQuery )
{
if( aPad == NULL )
return;
MODULE* module = (MODULE*) aPad->GetParent();
module->SetLastEditTime();
// aQuery = true to prompt for confirmation, false to delete silently
if( aQuery )
{
wxString msg;
msg.Printf( _( "Delete Pad (footprint %s %s) ?" ),
GetChars( module->GetReference() ),
GetChars( module->GetValue() ) );
if( !IsOK( this, msg ) )
return;
}
m_Pcb->m_Status_Pcb = 0;
aPad->DeleteStructure();
// Refresh the modified screen area, using the initial bounding box
// which is perhaps larger than the new bounding box
m_canvas->RefreshDrawingRect( module->GetBoundingBox() );
// Update the bounding box
module->CalculateBoundingBox();
OnModify();
}
void moveFootprintsInArea( CRectPlacement& aPlacementArea,
std::vector <MODULE*>& aModuleList, EDA_RECT& aFreeArea,
bool aFindAreaOnly )
{
CSubRectArray vecSubRects;
fillRectList( vecSubRects, aModuleList );
spreadRectangles( aPlacementArea, vecSubRects,
aFreeArea.GetWidth(), aFreeArea.GetHeight() );
if( aFindAreaOnly )
return;
for( unsigned it = 0; it < vecSubRects.size(); ++it )
{
wxPoint pos( vecSubRects[it].x, vecSubRects[it].y );
pos.x *= scale;
pos.y *= scale;
MODULE * module = aModuleList[vecSubRects[it].n];
EDA_RECT fpBBox = module->GetBoundingBox();
wxPoint mod_pos = pos + ( module->GetPosition() - fpBBox.GetOrigin() )
+ aFreeArea.GetOrigin();
module->Move( mod_pos - module->GetPosition() );
}
}
/**
* Function AllAreModulesAndReturnSmallestIfSo
* tests that all items in the collection are MODULEs and if so, returns the
* smallest MODULE.
* @return BOARD_ITEM* - The smallest or NULL.
*/
static BOARD_ITEM* AllAreModulesAndReturnSmallestIfSo( GENERAL_COLLECTOR* aCollector )
{
#if 0 // Dick: this is not consistent with name of this function, and does not
// work correctly using 'M' (move hotkey) when another module's (2nd module) reference
// is under a module (first module) and you want to move the reference.
// Another way to fix this would be to
// treat module text as copper layer content, and put the module text into
// the primary list. I like the coded behavior best. If it breaks something
// perhaps you need a different test before calling this function, which should
// do what its name says it does.
int count = aCollector->GetPrimaryCount(); // try to use preferred layer
if( 0 == count ) count = aCollector->GetCount();
#else
int count = aCollector->GetCount();
#endif
for( int i = 0; i<count; ++i )
{
if( (*aCollector)[i]->Type() != PCB_MODULE_T )
return NULL;
}
// all are modules, now find smallest MODULE
int minDim = 0x7FFFFFFF;
int minNdx = 0;
for( int i = 0; i<count; ++i )
{
MODULE* module = (MODULE*) (*aCollector)[i];
int lx = module->GetBoundingBox().GetWidth();
int ly = module->GetBoundingBox().GetHeight();
int lmin = std::min( lx, ly );
if( lmin < minDim )
{
minDim = lmin;
minNdx = i;
}
}
return (*aCollector)[minNdx];
}
/*
* Function GlobalChange_PadSettings
* Function to change pad caracteristics for the given footprint
* or alls footprints which look like the given footprint
* aPad is the pattern. The given footprint is the parent of this pad
* aSameFootprints: if true, make changes on all identical footprints
* aPadShapeFilter: if true, make changes only on pads having the same shape as aPad
* aPadOrientFilter: if true, make changes only on pads having the same orientation as aPad
* aPadLayerFilter: if true, make changes only on pads having the same layers as aPad
* aRedraw: if true: redraws the footprint
* aSaveForUndo: if true: create an entry in the Undo/Redo list
* (usually: true in Schematic editor, false in Module editor)
*/
void PCB_BASE_FRAME::GlobalChange_PadSettings( D_PAD* aPad,
bool aSameFootprints,
bool aPadShapeFilter,
bool aPadOrientFilter,
bool aPadLayerFilter,
bool aRedraw, bool aSaveForUndo )
{
if( aPad == NULL )
aPad = &GetDesignSettings().m_Pad_Master;
MODULE* module = aPad->GetParent();
if( module == NULL )
{
DisplayError( this, wxT( "Global_Import_Pad_Settings() Error: NULL module" ) );
return;
}
// Search and copy the name of library reference.
MODULE* Module_Ref = module;
double pad_orient = aPad->GetOrientation() - Module_Ref->GetOrientation();
// Prepare an undo list:
if( aSaveForUndo )
{
PICKED_ITEMS_LIST itemsList;
for( module = m_Pcb->m_Modules; module; module = module->Next() )
{
if( !aSameFootprints && (module != Module_Ref) )
continue;
if( module->GetFPID() != Module_Ref->GetFPID() )
continue;
bool saveMe = false;
for( D_PAD* pad = module->Pads(); pad; pad = pad->Next() )
{
// Filters changes prohibited.
if( aPadShapeFilter && ( pad->GetShape() != aPad->GetShape() ) )
continue;
double currpad_orient = pad->GetOrientation() - module->GetOrientation();
if( aPadOrientFilter && ( currpad_orient != pad_orient ) )
continue;
if( aPadLayerFilter && pad->GetLayerSet() != aPad->GetLayerSet() )
continue;
saveMe = true;
}
if( saveMe )
{
ITEM_PICKER itemWrapper( module, UR_CHANGED );
itemsList.PushItem( itemWrapper );
}
}
SaveCopyInUndoList( itemsList, UR_CHANGED );
}
// Update the current module and same others modules if requested.
for( module = m_Pcb->m_Modules; module; module = module->Next() )
{
if( !aSameFootprints && (module != Module_Ref) )
continue;
if( module->GetFPID() != Module_Ref->GetFPID() )
continue;
// Erase module on screen
if( aRedraw )
{
module->SetFlags( DO_NOT_DRAW );
m_canvas->RefreshDrawingRect( module->GetBoundingBox() );
module->ClearFlags( DO_NOT_DRAW );
}
for( D_PAD* pad = module->Pads(); pad; pad = pad->Next() )
{
// Filters changes prohibited.
if( aPadShapeFilter && ( pad->GetShape() != aPad->GetShape() ) )
continue;
if( aPadOrientFilter && (pad->GetOrientation() - module->GetOrientation()) != pad_orient )
continue;
if( aPadLayerFilter )
{
if( pad->GetLayerSet() != aPad->GetLayerSet() )
continue;
else
m_Pcb->m_Status_Pcb &= ~( LISTE_RATSNEST_ITEM_OK | CONNEXION_OK);
}
// Change characteristics:
pad->SetAttribute( aPad->GetAttribute() );
pad->SetShape( aPad->GetShape() );
pad->SetLayerSet( aPad->GetLayerSet() );
pad->SetSize( aPad->GetSize() );
pad->SetDelta( aPad->GetDelta() );
pad->SetOffset( aPad->GetOffset() );
pad->SetDrillSize( aPad->GetDrillSize() );
pad->SetDrillShape( aPad->GetDrillShape() );
pad->SetOrientation( pad_orient + module->GetOrientation() );
// copy also local mask margins, because these parameters usually depend on
// pad sizes and layers
pad->SetLocalSolderMaskMargin( aPad->GetLocalSolderMaskMargin() );
pad->SetLocalSolderPasteMargin( aPad->GetLocalSolderPasteMargin() );
pad->SetLocalSolderPasteMarginRatio( aPad->GetLocalSolderPasteMarginRatio() );
if( pad->GetShape() != PAD_TRAPEZOID )
{
pad->SetDelta( wxSize( 0, 0 ) );
}
if( pad->GetShape() == PAD_CIRCLE )
{
// Ensure pad size.y = pad size.x
int size = pad->GetSize().x;
pad->SetSize( wxSize( size, size ) );
}
switch( pad->GetAttribute() )
{
case PAD_SMD:
case PAD_CONN:
pad->SetDrillSize( wxSize( 0, 0 ) );
pad->SetOffset( wxPoint( 0, 0 ) );
break;
default:
break;
}
}
module->CalculateBoundingBox();
if( aRedraw )
m_canvas->RefreshDrawingRect( module->GetBoundingBox() );
}
OnModify();
}
bool PCB_EDIT_FRAME::AppendBoardFile( const wxString& aFullFileName, int aCtl )
{
IO_MGR::PCB_FILE_T pluginType = plugin_type( aFullFileName, aCtl );
PLUGIN::RELEASER pi( IO_MGR::PluginFind( pluginType ) );
// keep trace of existing items, in order to know what are the new items
// (for undo command for instance)
// Tracks are inserted, not append, so mark existing tracks to know what are
// the new tracks
for( TRACK* track = GetBoard()->m_Track; track; track = track->Next() )
track->SetFlags( FLAG0 );
// Other items are append to the item list, so keep trace to the
// last existing item is enough
MODULE* module = GetBoard()->m_Modules.GetLast();
BOARD_ITEM* drawing = GetBoard()->m_Drawings.GetLast();
int zonescount = GetBoard()->GetAreaCount();
// Keep also the count of copper layers, because we can happen boards
// with different copper layers counts,
// and the enabled layers
int initialCopperLayerCount = GetBoard()->GetCopperLayerCount();
LSET initialEnabledLayers = GetBoard()->GetEnabledLayers();
try
{
PROPERTIES props;
char xbuf[30];
char ybuf[30];
// EAGLE_PLUGIN can use this info to center the BOARD, but it does not yet.
sprintf( xbuf, "%d", GetPageSizeIU().x );
sprintf( ybuf, "%d", GetPageSizeIU().y );
props["page_width"] = xbuf;
props["page_height"] = ybuf;
GetDesignSettings().m_NetClasses.Clear();
pi->Load( aFullFileName, GetBoard(), &props );
}
catch( const IO_ERROR& ioe )
{
for( TRACK* track = GetBoard()->m_Track; track; track = track->Next() )
track->ClearFlags( FLAG0 );
wxString msg = wxString::Format( _(
"Error loading board.\n%s" ),
GetChars( ioe.What() )
);
DisplayError( this, msg );
return false;
}
// Now prepare a block move command to place the new items, and
// prepare the undo command.
BLOCK_SELECTOR& blockmove = GetScreen()->m_BlockLocate;
HandleBlockBegin( NULL, BLOCK_PRESELECT_MOVE, wxPoint( 0, 0) );
PICKED_ITEMS_LIST& blockitemsList = blockmove.GetItems();
PICKED_ITEMS_LIST undoListPicker;
ITEM_PICKER picker( NULL, UR_NEW );
EDA_RECT bbox; // the new items bounding box, for block move
bool bboxInit = true; // true until the bounding box is initialized
for( TRACK* track = GetBoard()->m_Track; track; track = track->Next() )
{
if( track->GetFlags() & FLAG0 )
{
track->ClearFlags( FLAG0 );
continue;
}
track->SetFlags( IS_MOVED );
picker.SetItem( track );
undoListPicker.PushItem( picker );
blockitemsList.PushItem( picker );
if( bboxInit )
bbox = track->GetBoundingBox();
else
bbox.Merge( track->GetBoundingBox() );
bboxInit = false;
}
if( module )
module = module->Next();
else
module = GetBoard()->m_Modules;
for( ; module; module = module->Next() )
{
module->SetFlags( IS_MOVED );
picker.SetItem( module );
undoListPicker.PushItem( picker );
blockitemsList.PushItem( picker );
if( bboxInit )
bbox = module->GetBoundingBox();
else
bbox.Merge( module->GetBoundingBox() );
bboxInit = false;
}
if( drawing )
drawing = drawing->Next();
else
drawing = GetBoard()->m_Drawings;
for( ; drawing; drawing = drawing->Next() )
{
drawing->SetFlags( IS_MOVED );
picker.SetItem( drawing );
undoListPicker.PushItem( picker );
blockitemsList.PushItem( picker );
if( bboxInit )
bbox = drawing->GetBoundingBox();
else
bbox.Merge( drawing->GetBoundingBox() );
bboxInit = false;
}
for( ZONE_CONTAINER* zone = GetBoard()->GetArea( zonescount ); zone;
zone = GetBoard()->GetArea( zonescount ) )
{
zone->SetFlags( IS_MOVED );
picker.SetItem( zone );
undoListPicker.PushItem( picker );
blockitemsList.PushItem( picker );
zonescount++;
if( bboxInit )
bbox = zone->GetBoundingBox();
else
bbox.Merge( zone->GetBoundingBox() );
bboxInit = false;
}
SaveCopyInUndoList( undoListPicker, UR_NEW );
// we should not ask PLUGINs to do these items:
int copperLayerCount = GetBoard()->GetCopperLayerCount();
if( copperLayerCount > initialCopperLayerCount )
GetBoard()->SetCopperLayerCount( copperLayerCount );
// Enable all used layers, and make them visible:
LSET enabledLayers = GetBoard()->GetEnabledLayers();
enabledLayers |= initialEnabledLayers;
GetBoard()->SetEnabledLayers( enabledLayers );
GetBoard()->SetVisibleLayers( enabledLayers );
ReCreateLayerBox();
ReFillLayerWidget();
if( IsGalCanvasActive() )
static_cast<PCB_DRAW_PANEL_GAL*>( GetGalCanvas() )->SyncLayersVisibility( GetBoard() );
GetBoard()->BuildListOfNets();
GetBoard()->SynchronizeNetsAndNetClasses();
SetStatusText( wxEmptyString );
BestZoom();
// Finish block move command:
wxPoint cpos = GetNearestGridPosition( bbox.Centre() );
blockmove.SetOrigin( bbox.GetOrigin() );
blockmove.SetSize( bbox.GetSize() );
blockmove.SetLastCursorPosition( cpos );
HandleBlockEnd( NULL );
return true;
}
/*
* Function DoPushPadProperties
* Function to change pad properties for the given footprint or all identical footprints
* aPad is the pattern. The given footprint is the parent of this pad
* aSameFootprints: if true, make changes on all identical footprints
* aPadShapeFilter: if true, make changes only on pads having the same shape as aPad
* aPadOrientFilter: if true, make changes only on pads having the same orientation as aPad
* aPadLayerFilter: if true, make changes only on pads having the same layers as aPad
* aSaveForUndo: if true: create an entry in the Undo/Redo list
* (usually: true in Schematic editor, false in Module editor)
*/
void PCB_BASE_FRAME::DoPushPadProperties( D_PAD* aPad, bool aSameFootprints,
bool aPadShapeFilter,
bool aPadOrientFilter,
bool aPadLayerFilter,
bool aSaveForUndo )
{
MODULE* Module_Ref = aPad->GetParent();
double pad_orient = aPad->GetOrientation() - Module_Ref->GetOrientation();
// Prepare an undo list:
if( aSaveForUndo )
{
PICKED_ITEMS_LIST itemsList;
if( aSameFootprints )
{
for( MODULE* module = m_Pcb->m_Modules; module; module = module->Next() )
{
if( module->GetFPID() == Module_Ref->GetFPID() )
{
ITEM_PICKER itemWrapper( module, UR_CHANGED );
itemsList.PushItem( itemWrapper );
}
}
}
else
{
ITEM_PICKER itemWrapper( Module_Ref, UR_CHANGED );
itemsList.PushItem( itemWrapper );
}
SaveCopyInUndoList( itemsList, UR_CHANGED );
}
// Update the current module and same others modules if requested.
for( MODULE* module = m_Pcb->m_Modules; module; module = module->Next() )
{
if( !aSameFootprints && (module != Module_Ref) )
continue;
if( module->GetFPID() != Module_Ref->GetFPID() )
continue;
// Erase module on screen
module->SetFlags( DO_NOT_DRAW );
m_canvas->RefreshDrawingRect( module->GetBoundingBox() );
module->ClearFlags( DO_NOT_DRAW );
for( D_PAD* pad = module->PadsList(); pad; pad = pad->Next() )
{
if( aPadShapeFilter && ( pad->GetShape() != aPad->GetShape() ) )
continue;
double currpad_orient = pad->GetOrientation() - module->GetOrientation();
if( aPadOrientFilter && ( currpad_orient != pad_orient ) )
continue;
if( aPadLayerFilter && ( pad->GetLayerSet() != aPad->GetLayerSet() ) )
continue;
// Do not copy pad to itself, it can create issues with custom pad primitives.
if( pad == aPad )
continue;
pad->ImportSettingsFromMaster( *aPad );
}
module->CalculateBoundingBox();
m_canvas->RefreshDrawingRect( module->GetBoundingBox() );
}
OnModify();
}
