void tst_QSimToolkit::testDeliverSendDTMF()
{
QFETCH( QByteArray, data );
QFETCH( QByteArray, resp );
QFETCH( int, resptype );
QFETCH( QString, text );
QFETCH( QString, number );
QFETCH( int, iconId );
QFETCH( bool, iconSelfExplanatory );
QFETCH( QByteArray, textAttribute );
QFETCH( QString, html );
QFETCH( int, options );
Q_UNUSED(resptype);
Q_UNUSED(html);
// Output a dummy line to give some indication of which test we are currently running.
qDebug() << "";
// Clear the client/server state.
server->clear();
deliveredCommand = QSimCommand();
// Compose and send the command.
QSimCommand cmd;
cmd.setType( QSimCommand::SendDTMF );
cmd.setDestinationDevice( QSimCommand::Network );
cmd.setText( text );
cmd.setNumber( number );
cmd.setIconId( (uint)iconId );
cmd.setIconSelfExplanatory( iconSelfExplanatory );
cmd.setTextAttribute( textAttribute );
server->emitCommand( cmd );
// Wait for the command to arrive in the client.
QVERIFY( QFutureSignal::wait( this, SIGNAL(commandSeen()), 100 ) );
// Verify that the command was delivered exactly as we asked.
QVERIFY( deliveredCommand.type() == cmd.type() );
QVERIFY( deliveredCommand.text() == cmd.text() );
QVERIFY( deliveredCommand.number() == cmd.number() );
QVERIFY( deliveredCommand.iconId() == cmd.iconId() );
QVERIFY( deliveredCommand.iconSelfExplanatory() == cmd.iconSelfExplanatory() );
QVERIFY( deliveredCommand.textAttribute() == cmd.textAttribute() );
QCOMPARE( deliveredCommand.toPdu( (QSimCommand::ToPduOptions)options ), data );
// The terminal response should have been sent immediately to ack reception of the command.
// We cannot check the return data explicitly because that will be handled in the modem
// and will typically be invisible to Qtopia. We therefore compare against what the
// response would be without the return data.
QCOMPARE( server->responseCount(), 1 );
QCOMPARE( server->envelopeCount(), 0 );
QSimTerminalResponse resp2;
resp2.setCommand( deliveredCommand );
resp2.setResult( QSimTerminalResponse::Success );
QCOMPARE( server->lastResponse(), resp2.toPdu() );
}
void DemoSimApplication::mainMenuSelection( int id )
{
QSimCommand cmd;
switch ( id ) {
case MainMenu_News:
{
QTimer::singleShot( 0, this, SLOT(sendDisplayText()) );
}
break;
case MainMenu_Sports:
{
sendSportsMenu();
}
break;
case MainMenu_Time:
{
cmd.setType( QSimCommand::SetupCall );
cmd.setNumber( "1194" );
cmd.setText( "Dialing the Time Guy ..." );
command( cmd, this, SLOT(mainMenu()) );
}
break;
case MainMenu_SticksGame:
{
startSticksGame();
}
break;
case MainMenu_Tones:
{
sendToneMenu();
}
break;
case MainMenu_Icons:
{
sendIconMenu();
}
break;
case MainMenu_IconsSE:
{
sendIconSEMenu();
}
break;
case MainMenu_Finance:
{
cmd.setType( QSimCommand::GetInput );
cmd.setText( "Enter code" );
cmd.setWantDigits( true );
cmd.setMinimumLength( 3 );
cmd.setHasHelp( true );
command( cmd, this, SLOT(getInputLoop(QSimTerminalResponse)) );
}
break;
case MainMenu_Browser:
{
sendBrowserMenu();
}
break;
default:
{
// Don't know what this item is, so just re-display the main menu.
mainMenu();
}
break;
}
}
void tst_QSimToolkit::testUISendSMS()
{
QFETCH( QByteArray, data );
QFETCH( QByteArray, resp );
QFETCH( QByteArray, tpdu );
QFETCH( int, resptype );
QFETCH( QString, text );
QFETCH( QString, number );
QFETCH( bool, smsPacking );
QFETCH( int, iconId );
QFETCH( bool, iconSelfExplanatory );
QFETCH( QByteArray, textAttribute );
QFETCH( QString, html );
QFETCH( int, options );
Q_UNUSED(html);
Q_UNUSED(options);
// Skip tests that we cannot test using the "simapp" UI.
if ( resptype == 0x0004 ) { // Icon not displayed
QSKIP( "", SkipSingle );
}
// Output a dummy line to give some indication of which test we are currently running.
qDebug() << "";
// Create the command to be tested.
QSimCommand cmd;
cmd.setType( QSimCommand::SendSMS );
cmd.setDestinationDevice( QSimCommand::Network );
cmd.setText( text );
if ( text.isEmpty() && ( options & QSimCommand::EncodeEmptyStrings ) != 0 )
cmd.setSuppressUserFeedback( true );
cmd.setNumber( number );
cmd.setSmsPacking( smsPacking );
cmd.setIconId( (uint)iconId );
cmd.setIconSelfExplanatory( iconSelfExplanatory );
cmd.setTextAttribute( textAttribute );
QByteArray newtpdu = tpdu;
if ( smsPacking ) {
// To prevent truncation of the 1.4.1 test data during 7-bit to 8-bit conversion,
// we extract the TPDU from "data" rather than use "tpdu".
newtpdu = QSimCommand::fromPdu( data ).extensionField(0x8B);
}
newtpdu[1] = (char)0;
cmd.addExtensionField( 0x8B, newtpdu );
// Set up the server with the command, ready to be selected
// from the "Run Test" menu item on the test menu.
server->startUsingTestMenu( cmd );
QVERIFY( waitForView( SimMenu::staticMetaObject ) );
// Clear the server state just before we request the actual command under test.
server->clear();
// Select the first menu item.
select();
// Wait for the text to display. If user feedback is suppressed, then
// the command is supposed to be performed silently.
if ( cmd.suppressUserFeedback() )
QVERIFY( !waitForView( SimText::staticMetaObject ) );
else
QVERIFY( waitForView( SimText::staticMetaObject ) );
// Check that the response is what we expected. The response is
// sent automatically by the back-end and is always "success".
QCOMPARE( server->responseCount(), 1 );
QCOMPARE( server->envelopeCount(), 0 );
QCOMPARE( server->lastResponse(), resp );
}
void tst_QSimToolkit::testDeliverSendSMS()
{
QFETCH( QByteArray, data );
QFETCH( QByteArray, resp );
QFETCH( QByteArray, tpdu );
QFETCH( int, resptype );
QFETCH( QString, text );
QFETCH( QString, number );
QFETCH( bool, smsPacking );
QFETCH( int, iconId );
QFETCH( bool, iconSelfExplanatory );
QFETCH( QByteArray, textAttribute );
QFETCH( QString, html );
QFETCH( int, options );
Q_UNUSED(html);
// Output a dummy line to give some indication of which test we are currently running.
qDebug() << "";
// Clear the client/server state.
server->clear();
deliveredCommand = QSimCommand();
// Compose and send the command.
QSimCommand cmd;
cmd.setType( QSimCommand::SendSMS );
cmd.setDestinationDevice( QSimCommand::Network );
cmd.setText( text );
if ( text.isEmpty() && ( options & QSimCommand::EncodeEmptyStrings ) != 0 )
cmd.setSuppressUserFeedback( true );
cmd.setNumber( number );
cmd.setSmsPacking( smsPacking );
cmd.setIconId( (uint)iconId );
cmd.setIconSelfExplanatory( iconSelfExplanatory );
cmd.setTextAttribute( textAttribute );
QByteArray newtpdu = tpdu;
if ( smsPacking ) {
// To prevent truncation of the 1.4.1 test data during 7-bit to 8-bit conversion,
// we extract the TPDU from "data" rather than use "tpdu".
newtpdu = QSimCommand::fromPdu( data ).extensionField(0x8B);
}
newtpdu[1] = (char)0;
cmd.addExtensionField( 0x8B, newtpdu );
server->emitCommand( cmd );
// Wait for the command to arrive in the client.
QVERIFY( QFutureSignal::wait( this, SIGNAL(commandSeen()), 100 ) );
// Verify that the command was delivered exactly as we asked.
QVERIFY( deliveredCommand.type() == cmd.type() );
QVERIFY( deliveredCommand.text() == cmd.text() );
QVERIFY( deliveredCommand.suppressUserFeedback() == cmd.suppressUserFeedback() );
QVERIFY( deliveredCommand.number() == cmd.number() );
QVERIFY( deliveredCommand.smsPacking() == cmd.smsPacking() );
QVERIFY( deliveredCommand.iconId() == cmd.iconId() );
QVERIFY( deliveredCommand.iconSelfExplanatory() == cmd.iconSelfExplanatory() );
QVERIFY( deliveredCommand.extensionData() == cmd.extensionData() );
QVERIFY( deliveredCommand.textAttribute() == cmd.textAttribute() );
QCOMPARE( deliveredCommand.toPdu( (QSimCommand::ToPduOptions)options ), data );
// The terminal response should have been sent immediately to ack reception of the command.
QCOMPARE( server->responseCount(), 1 );
QCOMPARE( server->envelopeCount(), 0 );
if ( resptype != 0x0004 ) {
QCOMPARE( server->lastResponse(), resp );
} else {
// We cannot test the "icon not displayed" case because the qtopiaphone
// library will always respond with "command performed successfully".
// Presumably the Qtopia user interface can always display icons.
QByteArray resp2 = resp;
resp2[resp2.size() - 1] = 0x00;
QCOMPARE( server->lastResponse(), resp2 );
}
}