oglplus::Program SpectraSharedObjects::BuildProgramWithXFB(
const char* prog_name,
const char** xfb_varyings,
std::size_t xfb_var_count,
bool separate_attribs
)
{
using namespace oglplus;
Program prog = Program(ObjectDesc(prog_name));
std::ifstream prog_file;
OpenResourceFile(prog_file, "glsl", prog_name, ".txt");
const std::size_t linesize = 1024;
char line[1024] = {'\0'};
int line_no = 0;
while(prog_file.getline(line, linesize).good())
{
std::size_t line_len = prog_file.gcount();
++line_no;
auto types = EnumValueRange<ShaderType>();
ShaderType type = ShaderType::Fragment;
std::size_t name_len = 0;
while(!types.Empty())
{
type = types.Front();
StrCRef name = EnumValueName(type);
name_len = name.size();
if(std::strncmp(line, name.c_str(), name.size()) == 0)
break;
types.Next();
}
if(types.Empty())
{
wxString message = wxString::Format(
wxGetTranslation(wxT(
"Invalid shader type in program '%s' "\
"on line %d: '%s'"
)),
wxString(prog_name, wxConvUTF8).c_str(),
line_no,
wxString(line, wxConvUTF8).c_str()
);
throw std::runtime_error(
(const char*)message.mb_str(wxConvUTF8)
);
}
// rtrim the name
for(std::size_t i = name_len+1; i!=line_len; ++i)
{
if(std::isspace(line[i]))
{
line[i] = '\0';
break;
}
}
std::ifstream shader_file;
OpenResourceFile(shader_file, "glsl", line+name_len+1, ".glsl");
Shader shader(type);
shader.Source(GLSLSource::FromStream(shader_file));
shader.Compile();
prog.AttachShader(shader);
}
if(xfb_varyings && xfb_var_count)
{
prog.TransformFeedbackVaryings(
xfb_var_count,
xfb_varyings,
separate_attribs
?TransformFeedbackMode::SeparateAttribs
:TransformFeedbackMode::InterleavedAttribs
);
}
prog.Link().Use();
return std::move(prog);
}
SphereExample(void)
: sphere_instr(make_sphere.Instructions())
, sphere_indices(make_sphere.Indices())
, hole_count(50)
, hole_diameter(0.30f)
{
// This shader will be used in transform fedback mode
// to transform the vertices used to "cut out the holes"
// the same way the sphere is transformed
vs_tfb.Source(
"#version 330\n"
"uniform mat4 CameraMatrix, ModelMatrix;"
"uniform float Diameter;"
"in vec3 Hole;"
"out vec3 vertTransfHole;"
"void main(void)"
"{"
" vertTransfHole = ("
" CameraMatrix *"
" ModelMatrix *"
" vec4(Hole * (1.0 + 0.5 * Diameter), 0.0)"
" ).xyz;"
"}"
);
// compile, setup transform feedback output variables
// link and use the program
vs_tfb.Compile();
prog_tfb.AttachShader(vs_tfb);
const GLchar* var_name = "vertTransfHole";
prog_tfb.TransformFeedbackVaryings(
1, &var_name,
TransformFeedbackMode::InterleavedAttribs
);
prog_tfb.Link();
prog_tfb.Use();
Uniform<GLfloat> diameter(prog_tfb, "Diameter");
diameter.Set(hole_diameter);
// bind the VAO for the holes
holes.Bind();
// bind the VBO for the hole vertices
hole_verts.Bind(Buffer::Target::Array);
// and the VBO for the transformed hole vertices captured by tfb
transf_hole_verts.Bind(Buffer::Target::TransformFeedback);
{
std::vector<GLfloat> data;
make_hole_data(data, hole_count);
Buffer::Data(Buffer::Target::TransformFeedback, data);
Buffer::Data(Buffer::Target::Array, data);
VertexAttribArray attr(prog_tfb, "Hole");
attr.Setup<Vec3f>();
attr.Enable();
}
transf_hole_verts.BindBase(
Buffer::IndexedTarget::TransformFeedback,
0
);
// Set the vertex shader source
vs.Source(
"#version 330\n"
"uniform mat4 ProjectionMatrix, CameraMatrix, ModelMatrix;"
"in vec4 Position;"
"in vec3 Normal;"
"out vec3 vertNormal;"
"out vec3 vertLight;"
"const vec3 LightPos = vec3(2.0, 3.0, 3.0);"
"void main(void)"
"{"
" gl_Position = ModelMatrix * Position;"
" vertNormal = mat3(ModelMatrix)*Normal;"
" vertLight = LightPos-gl_Position.xyz;"
" gl_Position = ProjectionMatrix * CameraMatrix * gl_Position;"
"}"
);
// compile it
vs.Compile();
// set the fragment shader source
fs.Source(
"#version 330\n"
"in vec3 vertNormal;"
"in vec3 vertLight;"
"out vec4 fragColor;"
"const int HoleCount = 50;"
"uniform vec3 TransfHole[50];"
"uniform float Diameter;"
"void main(void)"
"{"
" int imax = 0;"
" float dmax = -1.0;"
" for(int i=0; i!=HoleCount; ++i)"
" {"
" float d = dot(vertNormal, TransfHole[i]);"
" if(dmax < d)"
" {"
" dmax = d;"
" imax = i;"
" }"
" }"
" float l = length(vertLight);"
" vec3 FragDiff = TransfHole[imax] - vertNormal;"
" vec3 FinalNormal = "
" length(FragDiff) > Diameter?"
" vertNormal:"
" normalize(FragDiff+vertNormal*Diameter);"
" float i = (l > 0.0) ? dot("
" FinalNormal, "
" normalize(vertLight)"
" ) / l : 0.0;"
" i = 0.2+max(i*2.5, 0.0);"
" fragColor = vec4(i, i, i, 1.0);"
"}"
);
// compile it
fs.Compile();
// attach the shaders to the program
prog.AttachShader(vs);
prog.AttachShader(fs);
// link and use it
prog.Link();
prog.Use();
diameter.Set(hole_diameter);
// bind the VAO for the sphere
sphere.Bind();
// bind the VBO for the sphere vertices
verts.Bind(Buffer::Target::Array);
{
std::vector<GLfloat> data;
GLuint n_per_vertex = make_sphere.Positions(data);
// upload the data
Buffer::Data(Buffer::Target::Array, data);
// setup the vertex attribs array for the vertices
VertexAttribArray attr(prog, "Position");
attr.Setup<GLfloat>(n_per_vertex);
attr.Enable();
}
// bind the VBO for the sphere normals
normals.Bind(Buffer::Target::Array);
{
std::vector<GLfloat> data;
GLuint n_per_vertex = make_sphere.Normals(data);
// upload the data
Buffer::Data(Buffer::Target::Array, data);
// setup the vertex attribs array for the vertices
VertexAttribArray attr(prog, "Normal");
attr.Setup<GLfloat>(n_per_vertex);
attr.Enable();
}
gl.ClearColor(0.8f, 0.8f, 0.7f, 0.0f);
gl.ClearDepth(1.0f);
gl.Enable(Capability::DepthTest);
}
PickingExample(void)
: cube_instr(make_cube.Instructions())
, cube_indices(make_cube.Indices())
, vs(ShaderType::Vertex, ObjectDesc("Vertex"))
, gs(ShaderType::Geometry, ObjectDesc("Geometry"))
, fs(ShaderType::Fragment, ObjectDesc("Fragment"))
{
// Set the vertex shader source
vs.Source(
"#version 330\n"
"uniform mat4 ProjectionMatrix, CameraMatrix;"
"in vec4 Position;"
"out vec3 vertColor;"
"flat out int vertInstanceID;"
"void main(void)"
"{"
" float x = gl_InstanceID % 6 - 2.5;"
" float y = gl_InstanceID / 6 - 2.5;"
" mat4 ModelMatrix = mat4("
" 1.0, 0.0, 0.0, 0.0,"
" 0.0, 1.0, 0.0, 0.0,"
" 0.0, 0.0, 1.0, 0.0,"
" 2*x, 2*y, 0.0, 1.0 "
" );"
" gl_Position = "
" ProjectionMatrix *"
" CameraMatrix *"
" ModelMatrix *"
" Position;"
" vertColor = vec3("
" abs(normalize((ModelMatrix*Position).xy)),"
" 0.1"
" );"
" vertInstanceID = gl_InstanceID;"
"}"
);
vs.Compile();
// Set the geometry shader source
gs.Source(
"#version 330\n"
"layout(triangles) in;"
"layout(points, max_vertices = 1) out;"
"flat in int vertInstanceID[];"
"uniform vec2 MousePos;"
"out int geomInstanceID;"
"out float geomDepth;"
"vec2 barycentric_coords(vec4 a, vec4 b, vec4 c)"
"{"
// we'll need normalized device coordinates
// of the triangle vertices
" vec2 ad = vec2(a.x/a.w, a.y/a.w);"
" vec2 bd = vec2(b.x/b.w, b.y/b.w);"
" vec2 cd = vec2(c.x/c.w, c.y/c.w);"
" vec2 u = cd - ad;"
" vec2 v = bd - ad;"
" vec2 r = MousePos - ad;"
" float d00 = dot(u, u);"
" float d01 = dot(u, v);"
" float d02 = dot(u, r);"
" float d11 = dot(v, v);"
" float d12 = dot(v, r);"
" float id = 1.0 / (d00 * d11 - d01 * d01);"
" float ut = (d11 * d02 - d01 * d12) * id;"
" float vt = (d00 * d12 - d01 * d02) * id;"
" return vec2(ut, vt);"
"}"
"vec3 intersection(vec3 a, vec3 b, vec3 c, vec2 bc)"
"{"
" return (c - a)*bc.x + (b - a)*bc.y;"
"}"
"bool inside_triangle(vec2 b)"
"{"
" return ("
" (b.x >= 0.0) &&"
" (b.y >= 0.0) &&"
" (b.x + b.y <= 1.0)"
" );"
"}"
"void main(void)"
"{"
" vec2 bc = barycentric_coords("
" gl_in[0].gl_Position,"
" gl_in[1].gl_Position,"
" gl_in[2].gl_Position "
" );"
" if(inside_triangle(bc))"
" {"
" gl_Position = vec4(intersection("
" gl_in[0].gl_Position.xyz,"
" gl_in[1].gl_Position.xyz,"
" gl_in[2].gl_Position.xyz,"
" bc"
" ), 1.0);"
" geomDepth = gl_Position.z;"
" geomInstanceID = vertInstanceID[0];"
" EmitVertex();"
" EndPrimitive();"
" }"
"}"
);
gs.Compile();
// set the fragment shader source
fs.Source(
"#version 330\n"
"flat in int vertInstanceID;"
"in vec3 vertColor;"
"uniform int Picked;"
"out vec4 fragColor;"
"void main(void)"
"{"
" if(vertInstanceID == Picked)"
" fragColor = vec4(1.0, 1.0, 1.0, 1.0);"
" else fragColor = vec4(vertColor, 1.0);"
"}"
);
fs.Compile();
// attach the shaders to the picking program
pick_prog.AttachShader(vs);
pick_prog.AttachShader(gs);
const GLchar* var_names[2] = {"geomDepth", "geomInstanceID"};
pick_prog.TransformFeedbackVaryings(
2, var_names,
TransformFeedbackMode::InterleavedAttribs
);
pick_prog.Link();
// attach the shaders to the drawing program
draw_prog.AttachShader(vs);
draw_prog.AttachShader(fs);
draw_prog.Link();
// bind the VAO for the cube
cube.Bind();
// buffer for the picked instance depths and IDs
picked_instances.Bind(Buffer::Target::TransformFeedback);
picked_instances.BindBase(
Buffer::IndexedTarget::TransformFeedback,
0
);
{
std::vector<DepthAndID> data(36, DepthAndID(0.0, 0));
Buffer::Data(Buffer::Target::TransformFeedback, data);
}
// bind the VBO for the cube vertices
verts.Bind(Buffer::Target::Array);
{
// make and upload the vertex data
std::vector<GLfloat> data;
GLuint n_per_vertex = make_cube.Positions(data);
Buffer::Data(Buffer::Target::Array, data);
// setup the vertex attribs array for the vertices
VertexAttribArray draw_attr(draw_prog, "Position");
draw_attr.Setup<GLfloat>(n_per_vertex);
draw_attr.Enable();
}
gl.ClearColor(0.9f, 0.9f, 0.9f, 0.0f);
gl.ClearDepth(1.0f);
gl.Enable(Capability::DepthTest);
gl.FrontFace(make_cube.FaceWinding());
gl.CullFace(Face::Back);
gl.Enable(Capability::CullFace);
}
